Based on Ximena's research, she can conclude that there is a strong positive relationship between worker satisfaction and worker productivity.
This means that when workers are satisfied with their job, they tend to be more productive. This finding has important implications for employers who want to improve productivity in their workplace. By focusing on improving employee satisfaction, employers may be able to increase productivity and achieve better overall performance. However, it is important to note that correlation does not necessarily imply causation, and further research would be needed to establish a causal relationship between worker satisfaction and productivity.
You can learn more about Ximena's research at
https://brainly.com/question/28410706
#SPJ11
suppose poornima just bought stock in solarheat co., a renewable energy startup, and that poornima estimates there will be a dividend of $7 per share, paid annually, forever. if the discount rate on the stock is 8 percent, then using the discount dividend model, the value of the stock is: a.$80.50 per share b.$87.50 per share c.$91.00 per share d.$95.38 per share
The value of the stock is b. $87.50 per share
Explanation:
Given: Dividend, D = $7 per share
Discount rate, r = 8%
We need to find the value of the stock using the Discount Dividend Model
Formula: The value of the stock = D / (r – g)
where D is the dividend,
r is the discount rate,
and g is the expected growth rate.
Suppose the dividend is expected to grow at a rate of g. Here, the dividend is not expected to grow, so g = 0.
Then, the formula will be: Value of stock = D / r
Now, substituting the given values: Value of stock = 7 / 8% = $87.50 per share
Therefore, the correct option is b. $87.50 per share.
To learn more about “dividends” refer to the https://brainly.com/question/2960815
#SPJ11
as cassette tapes became increasingly popular in the 1980s, larger 8-track tapes were no longer being advertised and were available in fewer stores. which stage of the product life cycle were 8-track tapes in when this happened? multiple choice question. growth decline introduction maturity
Answer:
8-track tapes were in the Decline stage of the product life cycle when they became less popular in the 1980s and were no longer being advertised and available in fewer stores.
Explanation:
As cassette tapes became increasingly popular in the 1980s, larger 8-track tapes were no longer being advertised and were available in fewer stores. The stage of the product life cycle that 8-track tapes were in when this happened is "decline."
A product life cycle can be defined as a series of stages a product goes through during its lifetime. Product life cycle stages are introductory, growth, maturity, and decline stages. These stages describe the stages a product goes through from the moment it is launched to the time when it is no longer being produced. The product life cycle is determined by a product's sales volumes and revenues over time, and it is separated into four stages: introduction, growth, maturity, and decline. When a product enters the decline stage of the product life cycle, sales volumes decline as customers become increasingly disinterested in the product, and it is no longer profitable for businesses to produce the product. It is at this stage that the product is no longer being advertised and is available in fewer stores. The correct answer is "decline."
Learn more about the product life cycle here:
https://brainly.com/app/ask?q=+product+life+cycle
#SPJ11
GDP can be calculated by adding:Select one:a. consumption, gross investment, government purchases, exports, and imports Incorrectb. gross investment, government purchases, consumption, and net exportsc. consumption, net investment, wages, and rentsd. consumption, gross investment, government purchases, and importse. consumption, gross investment, government purchases, and exports
The correct answer is (b). GDP can be calculated by adding gross investment, government purchases, consumption, and net exports.
Gross Domestic Product (GDP) refers to the total value of goods and services produced by a country in a given period of time.
It is used to assess the economy's strength and growth rate. Consumption, gross investment, government purchases, and net exports are the four components used to calculate GDP.
GDP can be calculated using the following equation: GDP = C + I + G + NX
Where: C is consumption, I is gross investment, G is government purchases, NX is net exports.
To calculate GDP, we sum the total consumption (C), gross investment (I), government purchases (G), and net exports (NX). All four of these components must be included in the GDP calculation.
The correct answer to the given question is option b: gross investment, government purchases, consumption, and net exports.
To know more about gross investment, refer here:
https://brainly.com/question/17252319#
#SPJ11
the jackson-timberlake wardrobe company just paid a dividend of $1.32 per share on its stock. the dividends are expected to grow at a constant rate of 7 percent per year indefinitely. a. if investors require a return of 14 percent on the company's stock, what is the current price?
The current price of the Jackson-Timberlake Wardrobe Company's stock is $19.14,
In finance, a dividend is a payment made by a corporation to its shareholders, usually in the form of cash, but it can also be paid in stock or other property. Dividends are typically paid out of a company's profits, and the amount of the dividend is usually determined by the company's board of directors.
Dividends are one way that shareholders can benefit from their investment in a company. Shareholders who own stock in a company that pays dividends receive a portion of the company's profits in proportion to their ownership stake.
Not all companies pay dividends, and some may choose to reinvest their profits back into the business instead of distributing them to shareholders. The decision to pay dividends is often influenced by factors such as the company's financial performance, growth prospects, and capital requirements.
Dividends can provide a steady stream of income for investors, but it's important to note that they are not guaranteed. Companies may decide to reduce or suspend dividend payments if their financial performance deteriorates or if they need to conserve cash for other purposes.
Calculations are as follows:
Dividend per share:[tex]$1.32[/tex]
The required rate of return:[tex]14%[/tex]
The expected growth rate of dividends:[tex]7%[/tex]
Price = Dividend/[Required rate of return - Expected growth rate of dividends]
Price =[tex]$1.32/[14% - 7%][/tex]
Price = [tex]$1.32/7%[/tex]
Price = [tex]$19.14[/tex]
Learn more about finance here:-
https://brainly.com/question/989344
#SPJ11
Assunve that barber shops operate in perfectly competh product and factor markets. Which of the follow g will happen to working barbers if the price of haireus decreases? (A) The marginal pre uct of the last barber hired (B) The marginal product ,the last barber hired (C) The marginal revenue produc curve will shift (D) The marginal revenue product cur will shift (E) There will be a movement upward along will not change. will decrease. to the right. to the left. the marginal revenue curve.
The answer is option C. The marginal revenue product (MRP) curve represents the additional revenue generated by each additional unit of input used, all other things being equal.
Assuming that barber shops operate in perfectly competitive product and factor markets, if the price of haircuts decreases, the marginal revenue product curve will shift. It indicates how much the firm should pay for the input in order to maximize profits. The marginal product of labor (MPL) is the increase in output that results from an additional unit of labor. When MPL > W/P, the firm hires more workers.
Learn more about barber shops here:https://brainly.com/question/30263495
#SPJ11
Question 11 1 pts Select the sentence that best demonstrates professional writing skills. O You and your colleagues will receive training at a time and location that suit you. Your colleagues and yourself will receive training at a time and location that suit you. Question 10 1 pts Select the sentence that best demonstrates professional writing skills. If you're interested in being consideredfor the job, please send us your application within the next two weeks. If your interested in being considered for the job, please send us your application within the next two weeks. Question 9 1 pts Select the sentence that best demonstrates professional writing skills. You're health and the health of your family is very important to us. O Your health and the health of your family are very important to us. Your health and the health of your family is very important to us. Question 7 1 pts Select the sentence that best demonstrates professional writing skills. O If you forget to clock in or out, please let Melanie Smith or me know, and we will correct your timesheet. If you forget to clock in or out, please let Melanie Smithor myself know, and we will correct your timesheet. If you forget to clock in or out, please let Melanie Smith or I know, and we will correct your timesheet. Question 6 1 pts Correct the underlined part of the sentence. Select your answer from the multiple choice options. The marketing manager assigned Jennifer and I the best new sales territories. O Correct as is. Jennifer and me me and Jennifer Question 5 1 pts Select the sentence that best demonstrates professional writing skills. A team of people from marketing, finance, and production are preparing the proposal. A team of people from marketing, finance, and production is preparing the proposal.
The sentence that best demonstrates professional writing skills is: "A team of people from marketing, finance, and production is preparing the proposal."
This is the correct way to phrase the sentence, as the subject is a singular team and therefore requires a singular verb. Other sentences that demonstrate professional writing skills include: "You and your colleagues will receive training at a time and location that suit you.", "If you're interested in being considered for the job, please send us your application within the next two weeks.", "Your health and the health of your family are very important to us.", and "If you forget to clock in or out, please let Melanie Smith or myself know, and we will correct your timesheet." Professional writing should always be concise and accurate, using proper grammar and syntax.
Professional writing is a style of writing that is clear, concise, and seeks to convey information and ideas quickly in a professional setting. Professional writing is geared towards informing or persuading an audience in the world of work and commerce.Maintaining a professional and serious tone in professional writing is important. Writing in a familiar or friendly style should be avoided. Jokes, personal anecdotes, and colloquial expressions are not appropriate. The purpose of professional writing is to convey information in a clear, succinct, fluid way.
for more questions on proposal
https://brainly.com/question/27748469
#SPJ11
which of the following people would not be considered part of the labor force? select the correct answer below: a. lane is working in his first job after high school at a fast food restaurant.
b. peter lost his job in the recession and is unable to find a new job. c. cheng is unemployed and collecting unemployment benefits while searching for jobs.
d. joan was laid off from her job but has decided not to look for another job right now as she wants to stay home with her kids for a while.
The person that would not be considered part of the labor force is Joan who was laid off from her job but has decided not to look for another job right now as she wants to stay home with her kids for a while (Option d).
An individual who is laid off but has decided not to search for another job is not part of the labor force. Labor force refers to the number of individuals who are either working or are searching for employment. People who are retired, full-time students, and homemakers are not part of the labor force.
However, some individuals may be able to work but are not currently doing so, and they are referred to as "discouraged workers."
Therefore, these individuals are not part of the labor force even though they are able to work. In the above question, Lane and Cheng are actively looking for employment; therefore, they are part of the labor force. Peter is also willing to work but is currently unemployed; therefore, he is considered part of the labor force. Joan, on the other hand, has chosen not to search for a new job even though she was laid off. Thus, Joan is not part of the labor force.
To know more about labor force, visit: https://brainly.com/question/14328462
#SPJ11
The Crater Manufacturing Company recorded overhead costs of $14,192 at an activity level of 4,250 machine hours and $8,760 at 2,310 machine hours. The records also indicated that overhead of $9,735 was incurred at 2,610 machine hours. What is the variable cost per machine hour using the high-low method to estimate the cost equation? $2.80 $3.34. O $2.72 O $3.73
The high-low method is a common technique used to estimate cost equations. This method uses the highest and lowest activity levels to calculate the variable cost per unit (in this case, machine hour). To do this, we must first calculate the total overhead cost change between the two points.
The total overhead cost change is calculated by subtracting the overhead costs at the lower activity level (8,760) from the overhead costs at the higher activity level (14,192). This yields a total overhead cost change of 5,432. We then calculate the activity level change by subtracting the lower activity level (2,310) from the higher activity level (4,250). This yields an activity level change of 1,940.
The variable cost per machine hour is then calculated by dividing the total overhead cost change (5,432) by the activity level change (1,940). This yields a variable cost per machine hour of $2.80.
Know more about Cost equation here:-
https://brainly.com/question/31082643#
#SPJ11
demand is the demand for a good or service that reflects both the private and external benefits of its consumption.
The demand for a good or service that reflects both the private and external benefits of its consumption, Social Demand
Social demand refers to the total demand for a good or service in a particular market, which includes both the private demand and externalities associated with its consumption. Private demand refers to the quantity of a good or service that individuals and firms are willing and able to purchase at a given price. Externalities, on the other hand, refer to the costs or benefits that are incurred by third parties as a result of the consumption of the good or service.
For example, the social demand for renewable energy sources like solar and wind power includes not only the private demand from households and businesses that use these energy sources, but also the positive externalities associated with reducing greenhouse gas emissions and mitigating climate change.
Learn more about Social Demand
https://brainly.com/question/30002815
#SPJ4
Assume that the amount of ending inventory is overstated in Year 1. Further assume the overstatement in Year 1 is not discovered and the ending inventory in Year 2 is reported accurately. Under these circumstances,A: cost of goods sold in Year 2 will be understated.B: total assets in Year 2 will be understated.C: the Year 2 ending balance in retained earnings will be accurate.D: none of the answers are correct
Year 2's cost of goods sold will be underestimated. This is so that the cost of goods sold (COGS), which is determined by deducting beginning inventory from the total of purchases and ending inventory.
What happens if the ending inventory for the current year is overstated?When the closing inventory is overestimated, the cost of goods sold is understated, which causes the gross margin and net revenue to be inflated.
The net income for the period will be understated if inventory is inflated at the end of the quarter.Response and justification Net profits will be overstated if ending inventory is understated. Hence, if ending inventory is understated.
To know more about inventory visit:-
https://brainly.com/question/14184995
#SPJ1
one of the major predictions of the rothschild-stiglitz model is a positive correlation between risk and insurance coverage. this has never been observed in practice due to the confounding influence of moral hazard.
One of the major predictions of the Rothschild-Stiglitz model is a positive correlation between risk and insurance coverage. However, this has never been observed in practice due to the confounding influence of moral hazard.
What is the Rothschild-Stiglitz model?The Rothschild-Stiglitz model is a statistical theory that aims to predict individual behavior and insurance plan behavior. The model was proposed by Michael Rothschild and Joseph Stiglitz in 1976 and describes the connection between an individual's chance of a loss and their insurance coverage's depth and price.
What is moral hazard?Moral hazard is a situation in which an individual has an incentive to conduct or pursue riskier behavior because the cost of doing so will be borne by others.
In insurance, moral hazard occurs when the insured person has a high-risk activity that they want to undertake, but they are protected by an insurance policy that will cover the cost if anything goes wrong.
The major predictions of the Rothschild-Stiglitz model are:
High-risk people are more likely to purchase full coverage, and low-risk people are more likely to purchase low coverage.There is a positive correlation between risk and the amount of insurance coverage.Higher-risk activities have a higher insurance rate due to greater expected losses.In practice, the positive correlation between risk and insurance coverage has never been observed due to the confounding effect of moral hazard.To learn more about moral hazard, refer below:
https://brainly.com/question/30886828
#SPJ11
Prepare a direct materials budget showing the quantity of solvent H300 to be purchased for July, August, and September, and for the quarter in total.Pearl Products Limited Direct Materials BudgetJuly August September Third QuarterRequired production in units of finished goods 46,250 52,500 55,000 153,750Units of raw materials needed per unit of finished goods 3 cc 3 cc 3 cc 3 ccUnits of raw materials needed to meet production 138,750 157,500 165,000 461,250Add: Desired units of ending raw materials inventory 78,750 82,500 56,250 56,250Total units of raw materials needed 217,500 240,000 221,250 517,500Less: Units of beginning raw materials inventory Units of raw materials to be purchased
The total units of raw materials to be purchased in July, August and September and for the quarter in total is 217,500, 240,000, 221,250 and 517,500 respectively.
The direct materials budget for Pearl Products Limited for the months of July, August and September and for the quarter in total is shown below. The required production in units of finished goods is 46,250, 52,500, 55,000 and 153,750 respectively for the months of July, August and September and the quarter in total. The units of raw materials needed per unit of finished goods is 3 cc for all the months and the quarter.
July
August
September
Third Quarter
Required production in units of finished goods
46,250
52,500
55,000
153,750
Units of raw materials needed per unit of finished goods
3 cc
3 cc
3 cc
3 cc
Units of raw materials needed to meet production
138,750
157,500
165,000
461,250
Add: Desired units of ending raw materials inventory
78,750
82,500
56,250
56,250
Total units of raw materials needed
217,500
240,000
221,250
517,500
Less: Units of beginning raw materials inventory
Units of raw materials to be purchased
217,500
240,000
221,250
517,500
Therefore, the total units of raw materials to be purchased in July, August and September and for the quarter in total is 217,500, 240,000, 221,250 and 517,500 respectively.
for more such questions on raw materials
https://brainly.com/question/555478
#SPJ11
Data previously collected for purposes other than the one at hand are an important source of information as the researcher defines the problem. These data are called ______ data
These data are called secondary data.
Secondary data is data that has already been collected for another purpose and is now being used for a different purpose.
Secondary data is a valuable source of information because it provides an efficient and cost-effective way to get information without having to collect data from scratch.
Learn more about secondary data here:
https://brainly.com/question/20492915
#SPJ11
2.2. park company acquired an 80% interest in the common stock of southdale company for $1,540,000 on july 1, 2013. southdale company's stockholders' equity on that date consisted of: common stock $800,000 other contributed capital 400,000 retained earnings 330,000 compute the total non-controlling interest to be reported in the consolidated balance sheet. hint: a cad could be used to solve this problem. (5 points for correct answer; 5 points for formatting; 10 points total)
As a purchasing professional you can trust your suppliers to bid you the right capabilities at the right costs. True False 3 Small-volume purchases or commodities that don't deserve a lot of time are considered what kind of buy? a. Routine O b. Critical O c. Leverage O d Bottleneck O e. None of the above
The given statement in the question is False and correct option is a) Routine buy.
Small-volume purchases or commodities that don't deserve a lot of time are considered a "routine buy." This refers to purchases that are made frequently, involve small amounts of money, and have minimal impact on the company's operations if they are not delivered on time or are of poor quality. Routine buys are typically commodities that can be easily sourced from multiple suppliers, and do not require a significant amount of negotiation or supplier evaluation. In contrast, critical buys are purchases that are essential to the company's operations and have a significant impact if they are not delivered on time or are of poor quality. Leverage buys involve using the company's purchasing power to negotiate better prices or terms with suppliers, and bottleneck buys refer to purchases that are critical to the production process and can cause delays if they are not delivered on time.
To learn more about commodities click here
brainly.com/question/2245288
#SPJ4
which of the shifts explains what would happen to the production possibility curve if improved technologies increased the production of prekindergarten (pre-k) toys by 25 percent and the production of children's toys by 50 percent?
Shift III explains what would happen to the production possibility curve if improved technologies increased the production of prekindergarten (pre-k) toys by 25 percent and the production of children's toys by 50%.
Shift III refers to an increase in both the production of pre-K toys and children's toys due to improved technologies, which leads to an outward shift of the production possibility curve. This means that with the same amount of resources, more toys can be produced than before. The increase in pre-K toys production by 25% and children's toys by 50% indicates that the economy has become more efficient in utilizing its resources, enabling it to produce more goods and services.
The shift in the production possibility curve represents an increase in the economy's potential output, which can lead to economic growth and increased standards of living for individuals.
Learn more about production possibility curve https://brainly.com/question/26460726
#SPJ11
european pastries has an isurable loss of 82,500, while having insurance coverage beyond coinsurance reuirements. the insurance is divided between company a with $125,000 coverage, company b with $100,000 coverage, and company c with 175,000 coverage. find the amount of loss paid by each of the insurance companies
The amount of loss paid by each insurance companies is that Company A will pay $29,464.29, Company B will pay $23,571.43, and Company C will pay $29,464.29.
European Pastries has an insurable loss of $82,500, with insurance coverage beyond coinsurance requirements. The insurance is divided between company A with $125,000 coverage, company B with $100,000 coverage, and company C with $175,000 coverage.
The amount of loss paid by each of the insurance companies is given below:
Calculation of insurance coverage ratios:Company A = 125,000 / (125,000 + 100,000 + 175,000) = 0.3571
Company B = 100,000 / (125,000 + 100,000 + 175,000) = 0.2857
Company C = 175,000 / (125,000 + 100,000 + 175,000) = 0.3571
Calculation of insurance coverage amountsCompany A = 0.3571 * $82,500 = $29,464.29
Company B = 0.2857 * $82,500 = $23,571.43
Company C = 0.3571 * $82,500 = $29,464.29
Therefore, the amount of loss paid by each of the insurance companies is as follows: Company A: $29,464.29, Company B: $23,571.43, Company C: $29,464.29.
Learn more about Insurable loss:
https://brainly.com/question/30592253
#SPJ11
Operational or transaction databases are product oriented, handling transactions that update the database. In contrast, data warehouses are
A) product-oriented and volatile.
B) subject-oriented and nonvolatile.
C) subject-oriented and volatile.
D) product-oriented and nonvolatile
The correct answer is option B) subject-oriented and nonvolatile. What are Operational Databases? Operational databases refer to databases that are frequently updated in real-time.
It is a database that has undergone various modifications and updates throughout its existence. The main use of operational databases is for running applications and providing services to people. The primary focus of an operational database is to capture data from daily business operations.Types of Operational DatabasesTransactional databases are one of the most prevalent types of operational databases. This is the database that is utilized to store transactional information, and it is structured to ensure that transactions are consistent and accurate.Other types of operational databases include analytical databases, distributed databases, and centralized databases, and so on.What are Data Warehouses?A data warehouse is a repository of data used to support the management's decision-making process. It gathers, organizes, and maintains data from various sources for analysis and querying. It enables the data to be structured, and it is a central source of data for any organization. Because data warehouses only read data, they are non-volatile. Data warehouses concentrate on the present and historical data to provide more knowledge into current patterns and long-term trends. Data Warehouses are subject-oriented and provide a consolidated view of data gathered from numerous databases. Therefore, the answer to this question is B) subject-oriented and nonvolatile.
Read more about databases herehttps://brainly.com/question/518894:
#SPJ11
do employees in a large-scale bureaucracy (centralized) tend to have opportunistic behavior? agree or disagree?
The answer to this question is no straightforward because different studies have produced different results, but in general, the answer is that employees in large-scale bureaucracies tend to exhibit opportunistic behavior.
Opportunistic behavior is a term used to describe the tendency of individuals to exploit opportunities for personal gain. It is a phenomenon that occurs in all types of organizations, including large-scale bureaucracies. The reason for this is that large-scale bureaucracies are often characterized by a high degree of centralization, which means that decision-making authority is concentrated at the top.
This concentration of power creates an environment where individuals may be tempted to engage in opportunistic behavior. Opportunistic behavior in large-scale bureaucracy is a topic that has been researched extensively over the years. It is a question that seeks to find out whether employees in a large-scale bureaucracy tend to exhibit opportunistic behavior.
In conclusion, it can be said that employees in large-scale bureaucracies tend to exhibit opportunistic behavior. However, it is important to note that not all employees engage in this type of behavior. Some employees are more committed to the organization and are less likely to engage in opportunistic behavior. Ultimately, it is up to the organization to create a culture that discourages opportunistic behavior and rewards employees for their contributions.
Learn more about Opportunistic behavior here:
brainly.com/question/17283721
#SPJ11
True or False? exporting has an advantage compared to other types of international involvement, because it is usually easier to drop or change arrangements as the firm's needs change.
True. Exporting has an advantage compared to other types of international involvement because it is usually easier to drop or change arrangements as the firm's needs change.
Exporting allows firms to reduce their investment costs and enter foreign markets without having to undertake the risks of establishing a new business in a foreign country. Exporting also provides firms with the opportunity to try out different markets before making the decision to establish a foreign subsidiary. By exporting, a firm can test a foreign market before investing a large amount of money in a foreign operation. Exporting also allows firms to easily diversify their product portfolio and reach out to a larger customer base. Additionally, exporting allows firms to avoid the risks and complexities associated with foreign direct investment, such as currency risk, governmental regulations, and tariffs. In summary, exporting is advantageous compared to other types of international involvement because it is usually easier to drop or change arrangements as the firm's needs change.
For more questions on Exporting
https://brainly.com/question/13938080
#SPJ11
the concept focuses on identifying and understanding consumer needs - then, creating, delivering, and communicating value to target customers. what concept is this?
The concept focuses on identifying and understanding consumer needs - then, creating, delivering, and communicating value to target customers is called the marketing concept.
The marketing concept is a business philosophy that involves focusing on identifying and understanding consumer needs and wants, and then creating and delivering products and services that meet those needs and wants.
The goal of the marketing concept is to create value for target customers, which can lead to customer satisfaction, loyalty, and long-term profitability for the business.
In addition to identifying and understanding consumer needs, the marketing concept also involves creating and delivering value through effective product design, pricing, distribution, and promotion strategies. This requires a deep understanding of the target market, as well as the ability to effectively communicate with and engage target customers.
Learn more about marketing here:
https://brainly.com/question/25369230
#SPJ11
a technological improvement causes steel production to increase. as a result steel market prices fall from $300 per ton to $150 per ton. consequently, weekly light-truck steel frame production by ccnt technologies increases from 250 to 275 units. using the arc method (or midpoint formula) what is the cross-price elasticity of supply for light-truck steel frames?
The cross-price elasticity of supply for light-truck steel frames is 0.1. The cross-price elasticity depends upon factors like quantity supplied and prices both initial and final of steel frames.
This formula is: Ep = (Change in Quantity Supplied / Average of Initial and Final Quantity Supplied) / (Change in Price / Average of Initial and Final Price). Using the given information, the cross-price elasticity of supply for light-truck steel frames is calculated as follows:
Ep = (275 - 250 / (275 + 250) / (150 - 300 / (150 + 300) = 0.1
This means that a technological improvement causing steel production to increase and market prices to fall from $300 per ton to $150 per ton, has resulted in a weekly light-truck steel frame production by CCNT Technologies increasing from 250 to 275 units.
Know more about cross-price elasticity here:
https://brainly.com/question/21497072
#SPJ11
An investment offers $7,700 per year for 14 years, with the first payment occurring one year from now. Assume the required return is 8 percent.What is the value of the investment today? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)Present value $
For an investment offering $7,700 per year for 14 years, and required return rate of 8%, the value of investment today is $64,454.93.
The value of the investment today is calculated by discounting the future cash flows at the required return. The present value is the sum of all discounted future cash flows. The present value of the investment can be calculated as follows:
Present Value = 7,700 / (1.08) + 7,700 / [tex](1.08)^{2}[/tex] + ... + 7,700 / [tex](1.08)^{14}[/tex]
Present Value = 7,700 / (1.08) + 7,700 / [tex](1.08)^{2}[/tex] + ... + 7,700 / [tex](1.08)^{2}[/tex]
Present Value = $64,454.93
Therefore, the value of investment today is $64,454.93 at return rate of 8%.
Learn more about "Investment"; https://brainly.com/question/29547577
#SPJ11
In general, developers must get a construction loan before they can line up permanent (long-term) financing that will be used once the project is complete and being operated with tenants. (T/F)
In general, developers must get a construction loan before they can line up permanent (long-term) financing that will be used once the project is complete and operated with tenants. This statement is true.
What is a construction loan? A construction loan is a form of bank or another lender financing that assists in the construction of a new home or another type of real estate project. The lender will generally pay out the funds to the builder or contractor in tranches as the work progresses. When the work is completed, the loan is then repaid by the borrower via a new, more permanent loan that covers the property's entire value.
There are various forms of loans available in the market that can be used to finance your dream house; however, a construction loan is a special type of loan that is used for the construction of a new property. Once the project has been completed and the property has been occupied by tenants, the construction loan is replaced by a long-term, permanent financing arrangement that will cover the entire value of the property.
To learn more about “loans” refer to the https://brainly.com/question/20688650
#SPJ11
a company receives cash in march for services that it will provide in april. this scenario is an example of a(n): multiple choice prepaid expense accrued expense deferred revenue accrued revenue
The correct answer is "Deferred Revenue". This scenario is an example of deferred revenue, which is revenue that has been received in advance but has not yet been earned.
What is deferred revenue?Deferred revenue is a legal term that refers to an accounting concept. It is a future income, such as prepayments, that must be included on the balance sheet as a liability, rather than being recognized as income in the income statement at the time it is paid. Prepaid expenses are expenditures that are paid for in advance of when they will be used. Insurance premiums, rent, and other costs are examples of this.
Accrued expenses are debts that a company has incurred but has yet to pay. They include salaries, interest, and other expenses. However, in the question, the company receives cash in March for services that it will provide in April. This scenario is an example of deferred revenue.
Learn more about deferred revenue here:
brainly.com/question/14834977
#SPJ11
Assume that the monetary benefit of an information system is $40,000 when the project starts. After the completion of the start, the project has increasing benefits of $10,000 a year for the next five years (year 1 = $50,000, year 2 = $60,000, year 3 = $70,000, year 4 = $80,000, year 5 = $90,000). One-time development costs at the start of the project were $75,000, and recurring costs were $44,000 per year throughout the information system’s life. The discount rate for the company was 11 percent. Using a time horizon of y0, y1, y2, y3, y4, y5; do the following:
1. Calculate the net present value of these costs and benefits
2. Calculate the overall return on investment
3. Complete a break-even analysis the calculation of the break-even analysis (In Excel)
4. Generate a graphical representation of the break-even analysis, in case it occurs at any point from y0 to y5
in order to answer this question, you must calculate the net present value (NPV) of the costs and benefits, calculate the overall return on investment (ROI), calculate the break-even analysis, and create a graphical representation of the break-even analysis in Excel.
In order to calculate the net present value (NPV) of the costs and benefits, you will need to discount the future cash flows back to the present. The formula for the NPV is as follows:
NPV = -75000 + [(40000/1.11^1) + (50000/1.11^2) + (60000/1.11^3) + (70000/1.11^4) + (80000/1.11^5) + (90000/1.11^6)] - [(44000/1.11^1) + (44000/1.11^2) + (44000/1.11^3) + (44000/1.11^4) + (44000/1.11^5) + (44000/1.11^6)].
The overall return on investment (ROI) can be calculated by taking the present value of the benefits and subtracting the present value of the costs, then dividing the result by the present value of the costs. The formula for the ROI is as follows:
ROI = [(40000/1.11^1) + (50000/1.11^2) + (60000/1.11^3) + (70000/1.11^4) + (80000/1.11^5) + (90000/1.11^6)] - [(75000/1.11^0) + (44000/1.11^1) + (44000/1.11^2) + (44000/1.11^3) + (44000/1.11^4) + (44000/1.11^5) + (44000/1.11^6)]/[(75000/1.11^0) + (44000/1.11^1) + (44000/1.11^2) + (44000/1.11^3) + (44000/1.11^4) + (44000/1.11^5) + (44000/1.11^6)].
For the break-even analysis, you will need to calculate the break-even point. This is done by calculating the total cash flow and dividing it by the total number of years in the project's life. This will give you the amount of cash flow needed to break even. You can also create a graphical representation of the break-even analysis in Excel by plotting the total cash flow and the break-even point.
To summarize, in order to answer this question, you must calculate the net present value (NPV) of the costs and benefits, calculate the overall return on investment (ROI), calculate the break-even analysis, and create a graphical representation of the break-even analysis in Excel.
For more such questions on investment
https://brainly.com/question/30061503
#SPJ11
Tioga Company manufactures sophisticated lenses and mirrors used in large optical telescopes. The company is now preparing its annual profit plan. As part of its analysis of the profitability of individual products, the controller estimates the amount of overhead that should be allocated to the individual product lines from the following information.Lenses Mirrors Units produced 22 22 Material moves per product line 17 7 Direct-labor hours per unit 230 230 The total budgeted material-handling cost is $71,720.
Required:
1. Under a costing system that allocates overhead on the basis of direct-labor hours, the material-handling costs allocated to one lens would be what amount?
2. Under a costing system that allocates overhead on the basis of direct-labor hours, the material-handling costs allocated to one mirror would be what amount?
3. Under activity-based costing (ABC), the material-handling costs allocated to one lens would be what amount? The cost driver for the material-handling activity is the number of material moves.
4. Under activity-based costing (ABC), the material-handling costs allocated to one mirror would be what amount? The cost driver for the material-handling activity is the number of material moves.
Under a costing system that allocates overhead on the basis of direct-labor hours, the material-handling costs allocated to one lens would be:
First, we need to calculate the total direct labor hours for producing 22 lenses:
22 lenses x 230 direct-labor hours per unit = 5,060 total direct-labor hours
Next, we can use the direct-labor hours as the cost driver to allocate the material-handling cost:
Material-handling cost per direct-labor hour = $71,720 total material-handling cost / 5,060 total direct-labor hours
Material-handling cost per direct-labor hour = $14.16 per direct-labor hour
Finally, we can allocate the material-handling cost to one lens:
Material-handling cost per lens = $14.16 per direct-labor hour x 230 direct-labor hours per lens
Material-handling cost per lens = $3,254.80
Under a costing system that allocates overhead on the basis of direct-labor hours, the material-handling costs allocated to one mirror would be:
Using the same approach as in question 1, we can calculate the material-handling cost allocated to one mirror:
Material-handling cost per mirror = $14.16 per direct-labor hour x 230 direct-labor hours per mirror
Material-handling cost per mirror = $3,254.80
Under activity-based costing (ABC), the material-handling costs allocated to one lens would be:
The cost driver for the material-handling activity is the number of material moves. From the information given, we know that 22 lenses require 17 material moves each, for a total of 374 material moves:
22 lenses x 17 material moves per lens = 374 total material moves
The cost per material move can be calculated as:
Cost per material move = $71,720 total material-handling cost / 374 total material moves
Cost per material move = $191.73 per material move
Finally, we can allocate the material-handling cost to one lens:
Material-handling cost per lens = $191.73 per material move x 17 material moves per lens
Material-handling cost per lens = $3,257.41
Under activity-based costing (ABC), the material-handling costs allocated to one mirror would be calculated in the same way:
Material moves per product line for mirrors = 7 moves
Total material moves for mirrors = 22 units x 7 moves = 154 moves
Overhead rate per material move = Budgeted material-handling cost / Total material moves = $71,720 / 154 moves = $465.84 per move
Material-handling costs allocated to one mirror = Material moves per product line x Overhead rate per material move = 7 moves x $465.84 per move = $3,260.88
Therefore, the material-handling costs allocated to one mirror under ABC would be $3,260.88.
To know more costing system, visit: brainly.com/question/13450769
#SPJ4
What large trade organization covers licensed professionals, salons, and manufacturers and produces various large events, offers scholarships,
provides information, and offers free basic memberships?
A. American Association of Cosmetology
B.Professional Beauty Association
C.Skills USA
D.Federal Board of Cosmetology Professionals
The American Association of Cosmetology offers free basic memberships, covers licenced professionals, salons, and manufacturers, and organises a number of significant events.(option a)
What level of cosmetology education is highest?An associate degree, typically offered by private cosmetic school and community or technical institutions, is the highest hairdressing degree that is currently accessible. The ability to pursue a bachelor's degree inside a related profession, such as commerce or hospitality management, exists for people who already hold an associate in cosmetology. The applicant must hold a 10+2 diploma from an accredited institution. After completing high school and graduating, non-medical cosmetologists can enrol in a cosmetology diploma or certificate programme. It also offers scholarships, information, and provides informational materials.
To know more about cosmetologists visit:
https://brainly.com/question/30878665
#SPJ1
A small open economy with perfect capital mobility is characterized by all of the following except that: A) its domestic interest rate always exceeds the world interest rate. B) it engages in international trade. C) its net capital outflows always equal the trade balance. D) its government does not impede international borrowing or lending,
A small open economy with perfect capital mobility is characterized by all of the following except that (A) its domestic interest rate always exceeds the world interest rate.
A country's open economy is a system that combines domestic and foreign trade by allowing the unrestricted flow of goods and services, as well as capital and labor, across borders. International trade, such as imports and exports, is important in an open economy, and it often contributes to the country's economic growth. A small open economy is characterized by all of the following except that its domestic interest rate always exceeds the world interest rate. A small open economy is defined as a country that is open to trade and has a high degree of capital mobility. Open economies can trade with other countries, and there are no trade barriers, such as tariffs or quotas, between them.The perfect capital mobility definition: Capital mobility refers to the ease with which capital can be exchanged between two countries. When a country has unrestricted access to capital, it is said to have perfect capital mobility.
A small open economy with perfect capital mobility implies that the country is free to borrow or lend internationally without any constraints. The country's interest rate would be equivalent to the world interest rate in a perfect capital mobility setting. The interest rate in a small open economy with perfect capital mobility would not exceed the world interest rate.
Therefore, a small open economy with perfect capital mobility is characterized by all of the following except that its domestic interest rate always exceeds the world interest rate (option D).
Learn more about open economy here: https://brainly.com/question/29851441
#SPJ11
unions often resist cooperating with management in facilitating change beneficial to the workers because:
Unions often resist cooperating with management in facilitating change beneficial to the workers because: unions are wary of management's true motives behind the proposed change.
What are unions?
A union is an association of employees who come together for a common purpose, such as collective bargaining with employers for better wages, hours, and working conditions. A union, also known as a labor union, is a type of organization that represents employees and works to protect their interests.
Unions usually resist cooperating with management in facilitating change beneficial to the workers because they want to make sure that the proposed changes are in the best interests of the workers.
When management introduces a change, it may have ulterior motives, such as trying to reduce wages or benefits, or trying to increase productivity without increasing compensation. Unions are concerned about workers' job security and working conditions, and they want to ensure that any changes made do not have a negative impact on them.
They can be skeptical of management's promises of improvements and can feel that any changes should be made with the workers' input and agreement.
To know more about union, refer here:
https://brainly.com/question/12365696#
#SPJ11