Write the IUPAC names for the following compounds.

Answer: The density because it stays the same with any same liquids or solids or gas with whatever amount of it is added. It only changes if the matter of state is different or there is any environmental change.

Answer: 1 more of hydrogen =22.4dm3

X moles of hydrogen =4.48dm3

22.4dm3x = 4.48dm3

4.48dm3\22.4dm3

X=0.2 moles

Explanation: 1 volume of hydrogen at STP is 22.4dm3

Answer:

because those are the only thermometers that are truly accurate for kelvins

Explanation:

The Kelvin temperature in thermometers is used by scientists because it provides a temperature where zero indicates the complete absence of thermal energy.

All thermometers have a scale on them that we use to find the temperature, known as a temperature scale. Kelvin proposed that the temperature interval from the ice point to the steam point be defined as 100° containing earlier centigrade scales.

Lord Kelvin had given an absolute temperature scale based on the Carnot cycle.  The zero point is 273.15 on Kelvin’s scale below that of the Celsius scale.

On the kelvin scale, Each division is called a Kelvin (K) and is equal to a degree on the Celsius scale. On the Celsius scale, zero degrees is the freezing point of water while on the Kelvin scale the zero point is at absolute zero temperature.

Therefore, 0 K is equal to - 273.15°C, and 0°C is equal to 273.15 kelvins. A mathematical expression that gives the relation between the Celsius and Kelvin scales:

Temperature (K) = Temperature (°C) + 273

Learn more about Kelvin scale, here:

https://brainly.com/question/28938811

#SPJ2

God had warned Noah of the flood and directed him to build an ark. Noah had faith in God and began building.

Answer:

God Warned Noah for the Flood comindg to Earth to wash away all the bad people's lives and god also said get couple animals girls and boys then build an ark then bring your family and food there to then noah had a faith in god so he obey and start builind the ark in a top of a mountain

Explanation:

Hebrews 11:7

Answer:

0.9 kg

2870000 uL

there is a conversion calculator online

A bomb calorimeter with a heat capacity of 3.63 kJ/°C experiences a temperature rise of 4.21 °C when .8210 g of naphthalene is burned.

The combustion of naphthalene is used to calibrate the heat capacity of a bomb calorimeter.

It is a device used to measure the change in the internal energy of a reaction.

To determine the heat capacity of the calorimeter (C), we need to follow a series of steps.

The heat of combustion of naphthalene is -40.1kJ/g and .8210g were burned.

Qcomb = -40.1kJ/g × .8210g = -32.9 kJ

According to the law of conservation of energy, the sum of the heat released by the combustion and the heat absorbed by the bomb calorimeter is zero.

Qcomb + Qbomb = 0

Qbomb = -Qcomb = 32.9 kJ

32.9 kJ were absorbed, part by the calorimeter itself and part by the 1,000 g (m) of water, whose specific heat capacity (c) is 4.18 J/g°C.

A temperature rise (ΔT) of 4.21 °C is observed. We can determine the heat capacity of the bomb calorimeter (C) using the following expression.

Qbomb = Qcal + Qwater

32.9 kJ = C × ΔT + c × m × ΔT

32.9 kJ = C × 4.21 °C + (4.18 × 10⁻³ kJ/g.°C) × 1,000 g × 4.21 °C

C = 3.63 kJ/°C

A bomb calorimeter with a heat capacity of 3.63 kJ/°C experiences a temperature rise of 4.21 °C when .8210 g of naphthalene is burned.

Learn more about the bomb calorimeter here: https://brainly.com/question/9360310

hi have a nice day

will be less than 26 °C as water has a relatively higher specific heat than sand.

Explanation:

The specific heat of a substance is the amount of heat energy absorbed by one unit of mass of the substance when its temperature increases one unit.

From that, you can derive the equation for the specific heat of a substance:

specific heat = heat / (mass × ΔT)

Thus, assuming that all the heat provided by the lamp to both samples is the same and, as given, the amount (mass) of both samples is also the same, you have that the specific heat of the samples will be:

specific heat = constant / ΔT

So, specific heat and ΔT are inversely related.

It is known that water has a higher specific heat than sand (that is why the sand on the shore of a beach is, during the day, hotter than the water and your feet get burned when you walk on a sandy beach on a sunny day

it wouldnt let me type it because it said it was too inappropriate

Explanation:

The probability density function is nonnegative everywhere, and its integral over the entire space is equal to the terms "probability distribution function" and "probability function" .

In probability theory, a probability density function (PDF), or density of a continuous random variable, is a function whose value at any given sample (or point) in the sample space (the set of possible values taken by the random variable) can be interpreted as providing a relative likelihood that the value of the random variable would be equal to that sample.

Probability density is the probability per unit length, in other words, while the absolute likelihood for a continuous random variable to take on any particular value is 0 (since there is an infinite set of possible values to begin with), the value of the PDF at two different samples can be used to infer, in any particular draw of the random variable, how much more likely it is that the random variable would be close to one sample compared to the other sample.

Learn more about probability density function,here:

https://brainly.com/question/30403935

#SPJ2

Answer:

C

Explanation:

Answer:

c

Explanation:

Venus and Earth are often called twins because they are similar in size, mass, density, composition and gravity. Venus is actually only a little bit smaller than our home planet, with a mass about 80% of Earth's.

Answer:

1) during a phase change: particles overcome forces of attraction and temperature stays the same not during a phase change: temperature rises 2)Particle motion decreases, and electrostatic forces pull particles closer together.

3) Gases fill their container, showing that gas particles are not tied together and can move far apart.

Explanation:

Answer:

Example of ionic bonds— Sodium chloride and calcium oxide. Example of covalent bond— Water, carbon

Explanation:

ionic bond, also called electrovalent bond, type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound. Such a bond forms when the valence (outermost) electrons of one atom are transferred permanently to another atom.

A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms. These electrons are simultaneously attracted by the two atomic nuclei. A covalent bond forms when the difference between the electronegativities of two atoms is too small for an electron transfer to occur to form ions.

Answer: B.

Explanation:

Warm air molecules are far apart, while cool air molecules are packed closer together.

Answer: A It Transfers energy through radiation

Explanation: I jut got done with the exam 15 min ago

Answer:

Thermosphere

Explanation:

More specifically the ionosphere, since the ionosphere is the lower part of the thermosphere.

Hope this helps!

Answer:

potassium I believe is the correct answer

Explanation:

Potassium is the period four element with the lowest mass; its average mass is 39.0983amu.

The fourth period of the periodic table is where potassium has its lowest atomic mass.

Atomic mass is defined as the combined mass of an atom's protons, neutrons, and electrons.  The term "atomic mass" refers to the weight of an atom or molecule. To determine the average mass of elements and molecules as well as to resolve stoichiometry issues, the atomic mass is used.

An electrically neutral atom has an equal number of protons and electrons. As a result, using any of the two formulas, we may calculate the atomic mass of an element. The atomic mass of an element grows as we move from left to right in a period of the periodic table. In the fourth period of the current periodic table, Krypton has the highest atomic mass and potassium has the lowest.

Thus, the fourth period of the periodic table is where potassium has its lowest atomic mass.

To learn more about atomic mass, refer to the link below:

https://brainly.com/question/17067547

#SPJ2

Taking into account the reaction stoichiometry and limiting reagent, 0.7977 grams of KClO₃ are formed from the  reaction of 2.50 g of KClO₄  with 150 mg of FeCl₂  in excess of H₂SO₄.

In first place, the balanced reaction is:

2 FeCl₂ + 13 KClO₄ + H₂SO₄ → 2 Fe(ClO₃)₃ + K₂SO₄ + 11 KClO₃ + H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:  

The limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.

To determine the limiting reagent, it is possible to use the reaction stoichiometry of the reaction and a simple rule of three as follows: if by stoichiometry 1801.15 grams of KClO₄ reacts with 253.5 grams of FeCl₂, if 2.50 grams of KClO₄ react how many mass of FeCl₂ will be needed?

[tex]mass of FeCl_{2}=\frac{2.50 grams of KClO_{4} x253.5 grams of FeCl_{2}}{1801.15 grams grams of KClO_{4}}[/tex]

mass of FeCl₂=0.35 grams

But 0.35 grams of FeCl₂ are not available, 150 mg= 0.150 grams (being 1000 mg= 1 grams) are available. Since you have less mass than you need to react with 1801.15 grams of KClO₄, FeCl₂ will be the limiting reagent.

Then the following rule of three can be applied: if by reaction stoichiometry 253.5 grams of  FeCl₂ form 1348.05 grams of KClO₃, 0.150 grams of FeCl₂ form how much mass of KClO₃?

[tex]mass of KClO_{3}=\frac{0.150 grams of FeCl_{2}x1348.05 grams of KClO_{3} }{253.5grams of FeCl_{2} }[/tex]

mass of KClO₃= 0.7977 grams

Then, 0.7977 grams of KClO₃ are formed from the  reaction of 2.50 g of KClO₄  with 150 mg of FeCl₂  in excess of H₂SO₄.  

Learn more about reaction stoichiometry:

Answer:

4.5425806678891E+22mol

Explanation:

Answer:

10.53m/s

Explanation:

Initial velocity: 13m/s

Angle of projection: 55deg

Y-component of velocity is given as usin⌀

Plugging in, we get

= 13 * sin(55deg)

= 13 * 0.81

= 10.53

⇒ 10.53m/s

Answer:

A and B.

Explanation:

Climate:

High temperatures and greater rainfall increase the rate of chemical weathering. Lower temperatures can break rocks to by freezing water inside of a rock cracks. When it freezes it expands the water and forces the crack of the rock to expand.

Rock Type:

Certain types of rock are very resistant to weathering. Igneous rocks, especially intrusive igneous rocks such as granite, weather slowly because it is hard for water to penetrate them. Other types of rock, such as limestone, are easily weathered because they dissolve in weak acids.

Answer:

2.Closed System: A closed system is a thermodynamic system where energy can be exchanged with its surrounding but not matter. Open System: Open systems can exchange matter with the surrounding. Closed System: Closed systems cannot exchange matter with the surrounding. Open System: The mass of the system will vary with time in open systems.

Explanation:

1.The particle model is the name for the diagrams used to draw solids, liquids and gases. In the model, the particles are shown as circles or spheres. However, the particles in ice, liquid water and steam look the same because they are all water, but in different states of matter. Why do we use the particle model in science?

3.An open system can be defined as a system which can exchange both matter and energy with the surrounding. For example, the earth can be recognized as an open system. In this case, the earth is the system, and space is the surrounding. Sunlight can reach the earth surface and we can send rockets to space.

Answer:

I hope it help you the wavelength is 1.9130E-28

The branched alkanes in boxes two and three all have molecular formula C6H14 and are isomers of the compound shown.

Isomers are compounds that has the same molecular formula but different structural formulas. Hence, isomers of compounds can be represented by the same molecular formula since they contain the same number of each atom.

The molecule shown has molecular formula C6H14. The branched alkanes in boxes two and three all have molecular formula C6H14 and are isomers of the compound shown.

Learn more about isomers: https://brainly.com/question/1558338

Answer:

Tortilla

Explanation:

Answer:

tortilla

Explanation:

Answer:

4.002602

Explanation:

Seems Am Converting Between Grams Helium And Mole.

why are electric switches and boards are made up of plastic

Because plastic is a poor conductor of electricity.

Plastics do not conduct enough heat and electricity. Therefore, it is used in the manufacture of plug switches, plug boards, etc.

Explanation:

=>7.7 x10¹⁴ to 4.2 x10¹⁴Hz

Answer:

A

Explanation:

We are given that the molar mass of boron triflouride BF₃ is 67.81 g/mol. We want to determine the number of molecules of BF₃ in 2 g of BF₃.

Recall that there are 6.02 × 10²³ molecules in any mole of a substance. In other words, there are 6.02 × 10²³ BF₃ molecules in a mole of BF₃. Starting with the initial value, multiply:

[tex]\displaystyle \begin{aligned} 2\text{ g BF$_3$}&\cdot \frac{1\text{ mol BF$_3$}}{67.81 \text{ g BF$_3$}} \cdot \frac{6.02\times 10^{23} \text{ molecules BF$_3$}}{1 \text{ mol BF$_3$}} \\ \\ &= 1.776 \times 10^{22} \text{ molecules BF$_3$}\end{aligned}[/tex]

Hence, our answer is A.

*Perhaps it rendered the values incorrectly, but since we started with only 2 g of BF₃, our resulting calculation should only contain one significant digit. Hence, the correct answer should be 2 × 10²² molecules of BF₃.

The molecules of  BF₃ that are there in 2 g is 1.776 × 10²² molecules and the correct option is option A.

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Molar mass of BF₃ = 67.81 g/mol

Mass = 2g

Moles = mass / molar mass

= 2 / 67.81

= 0.029 moles

1 mole = 6.023 × 10²³

0.029 moles = 6.023 × 10²³ × 0.029

= 1.776 × 10²² molecules

Thus, the ideal selection is option A.

Learn more about Moles, here:

https://brainly.com/question/15209553

#SPJ6