Write the equilibrium expression of each chemical equation.
2H2S(g) 2H2(g) + S2(g)

Answers

Answer 1

Answer:

[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2

Explanation:

2H2S(g)⇋2H2(g)+S2(g)2H2S(g)⇋2H2(g)+S2(g)

The equilibrium constant expression in terms of concentrations is:

Kc=[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2.

Answer 2

The equilibrium expression for the given reaction can be written in terms of equilibrium constant which is the ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.

What is equilibrium?

Equilibrium is a state for a reversible reaction where, the rate of forward reaction is equal to the rate of backward reaction. The rate of a reaction is the rate of decrease in the concentration of reactants or the rate of increase in the concentration of the products.

The given reaction at equilibrium state is written as:

[tex]\rm 2H_{2}S (g)\leftrightharpoons 2H_{2} (g)+ S_{2}(g)[/tex]

The equilibrium constant Kb is ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.

[tex]Kb = \rm \frac{[H_{2}S]^{2}}{[H_{2}]^{2} [S_{2}]}[/tex]

The rate of the reaction will be r = Kb [H₂]² [S₂].

To find more on equilibrium constant, refer here:

https://brainly.com/question/15118952

#SPJ2


Related Questions

Help, due tonight (2/19/2021) at 11:59pm!

Answers

Answer:

283549.68 J

Explanation:

From the question given above, the following data were obtained:

Mass (M) = 2.7 Kg

Initial Temperature (T₁) = 5.4 °C

Final temperature (T₂) = 30.5 °C

Specific heat capacity (C) = 4184 J/KgºC

Heat (Q) =?

The amount of heat energy needed can be obtained as follow:

Q = MC(T₂ – T₁)

Q = 2.7 × 4184 × (30.5 – 5.4)

Q = 11296.8 × 25.1

Q = 283549.68 J

Thus, the heat energy needed is 283549.68 J

GOOD REWARD
I will report those who gives random answers.

Answers

Answer:

3 mol AlCl₃.

Explanation:

Hello!

In this case, according to the specified reactants and products, it is possible to set up the following balanced chemical reaction:

[tex]Al(NO_3)_3+3NaCl\rightarrow 3NaNO_3+AlCl_3[/tex]

Whereas we evidence the 1:3 mole ratio between aluminum nitrate and sodium chloride; thus, since different moles were reacting, we need to identify the limiting reactant by computing the moles of AlCl₃ produced by each reactant as follows:

[tex]n_{AlCl_3}^{by\ Al(NO_3)_3}=4molAl(NO_3)_3*\frac{1molAlCl_3}{1molAl(NO_3)_3} =4molAlCl_3\\\\n_{AlCl_3}^{by\ NaCl}=9molNaCl*\frac{1molAlCl_3}{3molNaCl} =3molAlCl_3[/tex]

Thus, we infer that NaCl is the limiting reactant as it produces the fewest moles of AlCl₃; consequently the produced amount of this product is 3 mol.

Best regards!

Organic Molecules worksheet

Answers

Answer:

ok

Explanation:

5) The stability of an atom is determined by
Re 1) P+n
2)P-n
3) P/N
4) N/P

Answers

Answer:

the answer p+n

Explanation:

Aqueous sulfuric acid H2SO4 will react with solid sodium hydroxide NaOH to produce aqueous sodium sulfate Na2SO4 and liquid water H2O. Suppose 59. g of sulfuric acid is mixed with 86.9 g of sodium hydroxide. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to 2 significant digits.

Answers

Answer:

22 g of water

Explanation:

The balanced chemical equation is:

H₂SO₄(aq) + 2 NaOH(aq) → Na₂SO₄(aq) +2 H₂O(l)

1 mol of H₂SO₄ reacts with 2 moles of NaOH to produce 2 moles of H₂O.

First, we have to convert the moles to grams by using the molecular weight (Mw) of each compound:

Mw H₂SO₄ = (1 g/mol x 2 H) + 32 g/mol S + (16 g/mol x 4 O) = 98 g/mol

        mass of H₂SO₄ = moles x Mw = 1 mol x 98 g/mol = 98 g

Mw NaOH = 23 g/mol Na + 16 g/mol O + (1 g/mol H) = 40 g/moL

        mass of NaOH = 2 moles x 40 g/mol = 80 g

Mw H₂O = (1 g/mol x 2 H) + 16 g/mol O = 18 g/moL

        mass of NaOH = 2 moles x 18 g/mol = 36 g

Now, we have to determine which is the limiting reactant. The stroichiometric ratio is 98 g H₂SO₄/80 g NaOH. We have 86.9 g of NaOH, so we need the following amount of H₂SO₄:

98 g H₂SO₄/80 g NaOH x 86.9 g NaOH = 106.4 g H₂SO₄

As we need more H₂SO₄ (106.4 g) than we have (59 g), the limiting reactant is H₂SO₄.

Finally, we calculate the mass of H₂O produced with the limiting reactant. The stoichiometric ratio is 36 g H₂O/98 g H₂SO₄, so we multiply the actual mass of H₂SO₄ by the stoichiometric ratio to calculate the maximum mass of H₂O produced:

mass of H₂O = 36 g H₂O/98 g H₂SO₄ x 59 g H₂SO₄ = 21.7 g ≅ 22 g

Italian dressing contains olive oil and vinegar, which will separate out from each other if left to sit. This makes the dressing a:

Answers

Italian salad dressing would be a suspension

What is Kb for N2H4 if the pH of a 0.158M solution of N2H5Cl is 4.5?

Answers

Answer:

Kb[tex]= 1.58 * 10^{-6}[/tex]

Explanation:

The correct question is

What is Kb for N2H4 if the pH of a 0.158M solution of N2H5Cl is 4.5?

Solution-

N2H4Cl hydrolyses on addition of water

The reaction equation is as follows -

N2H4+ + H2O ----> N2H4 + H3O+

[tex]Ka = \frac{K_w}{K_b} = \frac{10^{-14}}{K_b}[/tex]

pH [tex]= 4.5[/tex]

[tex][H+] = 10^{-pH} = 10^{-4.5}[/tex]

[tex]K_b= \frac{10^{-14} }{K_b} = \frac{Y_2}{0.158} \\K_b= \frac{(10^{-4.5})^2}{0.158}\\=> Kb = 0.158 * 10-14 /(10-4.5)2[/tex]

 Kb[tex]= 1.58 * 10^{-6}[/tex]

1. Give examples of a catalyst and the reaction it catalyses.
1

Answers

Answer:

Explanation:

Iron Haber process  = (making ammonia)

Vanadium (V) oxide = Contact process (a stage in making sulfuric acid)

Manganese dioxide = Decomposition of hydrogen peroxide (produces water and oxygen)

Which of the following represents C3H8?​

Answers

C because it’s 3 C’s and 8 H

Among the given options the compound with the formula C₃H₈ is option C. It is an organic compound under named as propane.

What is propane?

Propane is an organic compound classified as a hydrocarbon  with saturated carbon - hydrogen bonds. It's formula is C₃H₈. It contains 3 carbons and 8 hydrogens.

The two end carbons contains 3 hydrogens each and the middle carbon contains 2 hydrogens. They are all bonded through sigma bonding. The compound in A is C₅H₁₂ and in B, it is C₆H₁₄.

The formula of the compound in option D is C₅H₁₀. Hence, the skeleton showing the compound with the formula of C₃H₈ is option C.

To find more on propane, refer here:

https://brainly.com/question/24159489

#SPJ2

Imagine a made-up pol

b. Write both the formula and the name for the compound formed when Cu2+

combines

with boritate? (2 pts)

Answers

Answer:

No change to the cation  Add -ide to the anion

Question 1 and .2

Explanation:

A chemical reaction takes place inside a flask submerged in a water bath. The water bath contains 8.10kg of water at 33.9 degrees celsius . During the reaction 69.0kJ of heat flows out of the bath and into the flask.Calculate the new temperature of the water bath.

Answers

Answer: The new temperature of the water bath is [tex]31.9^0C[/tex]

Explanation:

The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.

[tex]Q=m\times c\times \Delta T[/tex]

Q = Heat released by water =[tex]69.0kJ=69000J[/tex]     (1kJ=1000J)

m= mass of water = 8.10 kg= 8100 g   (1kg=1000g)

c = specific heat capacity = [tex]4.184J/g^0C[/tex]

Initial temperature of the water = [tex]T_i[/tex] = [tex]33.9^0C[/tex]

Final temperature of the water = [tex]T_f[/tex]  = ?

Change in temperature ,[tex]\Delta T=T_f-T_i[/tex]

Putting in the values, we get:

[tex]-69000J=8100g\times 4.184J/g^0C\times (T_f-33.9)^0C[/tex]

[tex]T_f=31.9^0C[/tex]

The new temperature of the water bath is [tex]31.9^0C[/tex]

The reaction Fe3O4 +C ---> CO2 + Fe can be balanced with the coefficients:
1,4,4,3
2.4.4.3
1,2,2,3
O 1,1,1,3

Answers

Answer:

the answer is 1,2,2,3

Explanation:

Fe3O4 +C ---> CO2 + Fe

1Fe3O4 +2C ---> 2CO2 + 3Fe

If a machine has an AMA of 1 what does this tell you about the RF and EF?

Answers

Answer:

Although you might think of a machine as complex system of gears, drive belts and and a motor, the definition physicists use is much simpler. A machine is simply a device that does work, and there are only six different types of simple machines. They include the lever, the pulley, the wheel and axle, the screw, the wedge and the inclined plane.

Explanation:


5. If you advance the movie one frame, the knot at point A would be
a) in the same place b) higher
c) lower d) to the right
e) to the left
relative to the hand
6. If you advance the movie one frame, the pattern of the waves will be
a) in the same place
b) shifted right
c) shifted left
shifted up
e)
shifted down
7.
If the person starts over and moves his hand more quickly, the peaks of the waves will be
a) the same distance apart
b) further apart
c) closer together
8. If you lower the frequency of a wave on a string you will
a) lower its speed. b) increase its wavelength. c). lower its amplitude. d) shorten its period

Answers

Answer:

5. higher

6. shifted down

7. closer together  

8. increase its wave length

Explanation:

I am running a reaction that creates 138 grams of sulfur trioxide (S03). My theoretical yield was 156 grams. What is my percentage yield?​

Answers

Answer:

88.46%

Explanation:

Percentage yield is actual/theoretical * 100

138/156 * 100 = 88.4615385

1. How many moles are in the following: a. 5 grams of Lici​

Answers

Answer:

Number of moles = 0.1179 (Approx)

Explanation:

Given:

Mass of LiCl = 5 grams

Molar mass of LiCl = 42.39 g

Find:

Number of moles

Computation:

Number of moles = Mass / Molar mass

Number of moles = 5 / 42.39

Number of moles = 0.1179 (Approx)

The ______ are new substances taht are created following a chemical reaction?

Answers

Answer: The product are the new substances that are created following a chemical reaction.

One mole of a metallic oxide reacts with one mole of hydrogen to produce two moles of the pure metal
and one mole of water. 5.00 g of the metallic oxide produces 2.32 g of the metal. What is the metallic
oxide? (Use molar masses)

Answers

Answer:

The metallic oxide is Li₂O

Explanation:

Let the metallic oxide be M₂O

Thus;

M₂O + H₂ = 2M + H₂O

Molar mass of M₂O = (2x + 16)

We assume Molar mass of M to be x.

We are told that 5.00 g of the metallic oxide produces 2.32 g of the metal.

By proportion, we can write the following;

5g of M₂O × (1 mole of M₂O/(2x + 16)) × (2 moles of M/1 mole of M₂O) = 2.32 g of M × 1 mole of M/x g of M

This cancels out to give us;

10/(2x + 16) = 2.32/x

Cross multiply to get;

10x = 2.32(2x + 16)

10x = 4.64x + 37.12

10x - 4.64x = 37.12

5.36x = 37.12

x = 37.12/5.36

x = 6.925 g/mol

The metal with a molar mass closest to this value of x is Lithium which has a molar mass of 6.94 g/mol

Thus the metal is Lithium and as such the metallic oxide is Li₂O

Two colorless chemicals combine inside a glow

stick. When the chemicals combine, they produce

brightly colored light. The glow stick's temperature

does not change.

emission of heat

emission of light

color change

formation of gas

Answers

Answer:

Option B & Option C

Explanation:

correct on edge! :D

When chemicals combine chemical change takes place which is accompanied by emission of heat and light.

What is a chemical change?

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical changes:

1) inorganic changes

2)organic changes

3) biochemical changes

During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical change,here:

https://brainly.com/question/23693316

#SPJ5

Calculate the molar it’s of a solution containing 29g of glucose dissolved in 24.0 g of water

Answers

It would be 5g of glucose solution

I’m thinking it’s the last one but I’m not sure.

Answers

Answer:

0.71 g/cm^3

Explanation:

Density = Mass ÷ Volume

So you would do 112.5 ÷ 159.3 which gives the result 0.71

can someone help me?​

Answers

Answer:

no, and next time take it right

Explanation:

In a chemical reaction, reactants interact to form products. This process is summarized by a chemical equation. In the Balancing Chemical Equations Gizmo, look at the floating molecules below the initial reaction: H2 + O2 ???? H2O. 1. How many atoms are in a hydrogen molecule (H2)? 2. How many atoms are in an oxygen molecule (O2)? 3. How many hydrogen and oxygen atoms are in a water molecule (H2O)? 4. In general, what does a subscript (such as the "2" in H2) tell you about the molecule? 5. A chemical equation is balanced if the number of each type of atom on the left side is equal to the number of each type on the right side. Is this reaction balanced?

Answers

Answer:

See answer below

Explanation:

Let's write the equation again:

H₂ + O₂ ---------> H₂O

Now that we have written the equation, let's solve the exercise:

1. In this case, we first need to make a difference between atom and molecule. An atom is just a single element, a molecule it's when you have more than 1 element in a compound.

Knowing this, we have the H₂. In this case we only have one element, Hydrogen. However, as you can see in the expression, we have a number 2 as a subscript. The number 2 means that the hydrogen it's not alone, we do not have one hydrogen, we have two hydrogens, therefore, it becomes a molecule. Now, This molecule, according to the number 2 as subscript, means that the molecule of hydrogen have 2 atoms of hydrogens, and this formed the molecule, therefore, there are 2 atoms of hydrogens in H₂.

2. Following the same explanation of above, but using oxygen, we have the same thing, so, in a molecule of O₂, we have 2 atoms of oxygen.

3. The molecule of water is composed of Hydrogen and oxygen. As you can see, in this case we have 2 hydrogen and 1 oxygen, therefore, in 1 molecule of water, there are 1 atom of oxygen and 2 atoms of hydrogen.

4. The subscript, as you may know now, tell us the number of atoms that you have in a molecule or compound. This number also means, in different compounds the oxidation state of the atoms that conform the molecule.

5. No, the equation is not balanced, because we do not have the same number of oxygen on the side of the products. We need to balance that. As the oxygen is unbalanced, we just need to put numbers as coefficients, behind the molecule. This number will multiply the number of atoms of the referred molecule. So, doing this with the water on the products to equal the number of oxygen, we have:

H₂ + O₂ ---------> 2H₂O

But this 2, unbalance at the same time the number of hydrogens. We now have 4 hydrogens in the product, so, to balance this, we put a 2 on the reactants:

2H₂ + O₂ ---------> 2H₂O

Now the reaction is balanced.

Hope this helps

Hi do you know this?​

Answers

Answer:

2

Explanation

It seems logical

It’s the second answer choice

When an oxidant is present, vitamin C can be converted to a product described as (5R)-5-[(1S)-1,2-dihydroxyethyl]-3,4-dihydroxy-furan-2,3,4(5H)-trione, which retains the furan-based nomenclature of vitamin C and describes the hydrogen placement at atom 5 of the ring. Which of the following statements best describes this vitamin C derivative?A) Vitamin C is reduced to yield a furan ring with 4 carbonyl groups and no double bonds.B) Vitamin C is oxidized to yield a furan ring with 3 carbonyl groups and 1 double bond.C) Vitamin C is reduced to yield a furan ring with 1 carbonyl group and no double bonds.D) Vitamin C is oxidized to yield a furan ring with 3 carbonyl groups and no double bonds

Answers

Answer:

D) Vitamin C is oxidized to yield a furan ring with 3 carbonyl groups and no double bonds

Explanation:

We can tell that the compound " (5R)-5-[(1S)-1,2-dihydroxyethyl]-3,4-dihydroxy-furan-2,3,4(5H)-trione " has 3 carbonyl groups due to it having "trione" in the name (and it lacking other carbonyl group names, like amide or carboxylic acid).

As there is no "-ene" part of the name referencing a double bond, the only option left is option D).

How many molecules are in 2.50 moles of carbon dioxide?
Question 3 options:


1.5055 molecules


4.15 x 10^24 molecules


1.5055 x 10^24 molecules


2.4 x 10^24 molecules

Answers

Answer:

1.5055×10²⁴ molecules

Explanation:

From the question given above, the following data were obtained:

Number of mole CO₂ = 2.5 moles

Number of molecules CO₂ =?

The number of molecules present in 2.5 moles CO₂ can be obtained as:

From Avogadro's hypothesis,

1 mole of CO₂ = 6.022×10²³ molecules

Therefore,

2.5 mole of CO₂ = 2.5 × 6.022×10²³

2.5 mole of CO₂ = 1.5055×10²⁴ molecules

Thus, 1.5055×10²⁴ molecules are present in 2.5 moles CO₂

Which is a typical characteristic of an ionic compound?
A) Electron pairs are shared among atoms.
B) The ionic compound is a discrete molecule that can be represented in a Lewis Structure.
C) An ionic bond is one of the weakest attractive forces that results in ionic compounds having low
melting points.
D) The ionic compound is a continuous array of repeating unit cells that comprises a crystalline structure.

Answers

Answer:

The answer to this problem is C

The level of a liquid (i.e. distilled water) in laboratory glassware is determined by sight. The level corresponds to a specific volume. The volume is established by identifying the meniscus of the liquid relative to a calibration mark or series of calibration marks on the glassware (i.e. volumetric flask vs. buret). Which of the following statements is NOT correct when reading the meniscus?

a. the edge of the meniscus should be used to determine volume relative to the mark or marks
b. the meniscus should be read at eye level
c. when the meniscus is between marks, estimate the reading to the nearest tenth of a division (ie, estimate to 0.01 mL if buret has 0.1 ml divisions)
d. the center of the meniscus should be used to determine volume relative to the mark or marks

Answers

Answer:

c. when the meniscus is between marks, estimate the reading to the nearest tenth of a division (ie, estimate to 0.01 mL if buret has 0.1 ml divisions)

Explanation:

When we put a liquid in a pipette, we can see that the surface of that liquid will have a curve. This curve is called the meniscus and it has the correct volume that an aqueous solution has. However, for this, it is necessary that the meniscus is observed at eye level and that its edges and center are clearly visible.

What type of energy does a bouncing ball have ?

Answers

Answer:

Kinetic

Explanation:

When the ball is falling towards the table, it has kinetic energy. This elastic potential energy is why the ball is able to bounce, or rebound. After the ball rebounds, the elastic potential energy is transformed into kinetic energy, but it will never possess as much kinetic energy as during its original fall.

Answer:

Explanation:

It has kinetic energy.

Hope it helped you.

A powder sample weighing 250 g and having a surface area of 1 m2/g is dispersed in 1 L of water. After 10 minutes, 0.4 g of the sample is dissolved. The aqueous solubility of the sample is 0.01 g/cm3. a) Calculate k. Assume that sink conditions are prevailing and that the surface area of the sample is constant. b) How long will the sink conditions prevail

Answers

Answer:

a)

[tex]K = 2.64 * 10^{-8}[/tex]

b)

[tex]15 \frac{5}{8}[/tex] hours

Explanation:

Given

Surface Area (S) of 250 grams of powder sample [tex]= 250[/tex] square meter.

[tex]S = 2500000[/tex] square centimeter

[tex]V\frac{dC}{dT} = 0.40[/tex] grams/minute

[tex]V\frac{dC}{dT} = \frac{dM}{dT} = \frac{0.40*60}{10} = 0.66[/tex] mg per second

[tex]C_s = 0.01[/tex] gram per cubic meter [tex]= 10[/tex] mg/ml

a)

[tex]\frac{dM}{dT} = K SC_s[/tex]

[tex]0.66 = K* 2500000* 10\\[/tex]

[tex]K = 2.64 * 10^{-8}[/tex] cm /sec

b) Time taken

Time taken to sink

[tex]\frac{10*60}{0.4} * 37.5 = 56,250[/tex]

Time in hours

[tex]15 \frac{5}{8}[/tex] hours

Other Questions
The user needs to drag the slider bar in an upwards direction in order to completely melt away a body layer when in the dissection study area.True or False Please help me with this math problem! :( Which politician helped bring major league sports to Atlanta?Ivan Allen Jr.Lauch FairclothWilliam B. HartsfieldAndrew Young A line passes through the point (8,-8) and has a slope of 3/4. Write an equation in slope-intercept form for this line. Based on this excerpt, with which statement would Judge Black have agreed?Group of answer choicesa. Individual rights can be restricted if a "clear and present danger" exists.b. Only the Supreme Court can legally deprive citizens of civil rights and liberties.c. Individual rights must be maintained at all costs, even in national emergencies.d. The Supreme Court lacks the power to block executive orders made during wartime. why is heliocentric right and geocentric wrong? Imagine you accidently step on a sharp object withyour bare foot.Explain how the parts of the peripheral nervoussystem work with the central nervous system toproduce a response to the stimulus Altex Inc. manufactures two products: car wheels and truck wheels. To determine the amount of overhead to assigning to each product line, the controller, Robert Hermann, has developed the following information. Car TruckEstimated wheels produced 42,000 11,000Direct labor hours per wheel 1 3Total estimated overhead costs for the two product lines are $863,000.a. Calculate the overhead rate.b. Compute the overhead cost assigned to the car wheels and truck wheels, assuming that direct labor hours are used to allocate overhead costs. Match the items in the left column to the items in the right column.1 baldachina pillared canopy2. luminositypossessing the quality of truth3. verisimilitudehaving the quality of light plz help me can't fail I need this and brainly is really helping There are numbers 1-6 on a spinner what is the probability the spinner lands on an odd number? Please help a^3-5a^2+49 Suppose that instead of an out-of-uniform police officer and his son being in the parking lot when the teenagers arrived. Sally, a parking attendant hired by the store, was in the parking lot being picked up by her daughter. When Sally asked the teenagers to quiet down they assaulted her. Sally's daughter dashed into the store to request that the clerk call the police. The clerk refused and would not let the daughter use the store phone to place the call herself. The daughter then went back out to the parking lot and asked a store customer to call the police using his cell phone. The customer also refused to help. Sally sued the store and the customer 1. Under these facts 2. In her suit against the store the Sally can cite 3. Sally stands in a special relationship to the store customer because 4. Sally is most likely to win her suit against Explain how smoking damages the respiratory system and name two conditions that can develop when a person smokes. ribe the location and importance of cilia and mucus in the respiratory system. PLEASE HELP!! WILL GIVE BRAINLIEST What are the benefits of having a positive work ethic?How does a negative work ethic impact the company?What is the purpose of a resume?Based on the results of your job search, what kinds of skills or jobs are in the highest demand in the area in which you looked?Where are some places to find professionals to interview? If the rate $56 per 7 hours is reduced to a unit rate, the result isdollarsper hourAnswer hereSUBM Identify the slope AND y-intercept of the equation below.y=4x7 Is 16:14 equivalent to 64:60 2(x-1)=3(x-4) how many solutions Interested in society as a whole, believed sociologist should go beyondwhat can be directly observed and attempt to uncover feelings andthoughts of individuals.Karl MarxMax WeberSociologyPolitical Science Marquette King, formerly of the Denver Broncos, is practicingkicking off using a kicking holder with the ball on the ground.For one of the kicks the ball reaches a height of 90.6 m andlands on the ground 53 yds (48.5 m) away. Find the magnitudeof the initial velocity given by his kick to the ball. Treat airresistance as negligible. Hint: Even though the horizontal andvertical motions are independent, there is a quantity that iscommon to both of them.