Answer:
MKS stands for Meter, Kilogram and second. In this system of unit mass is given in Kilogram, length in meter and time in second. ... CGS system stands for Centimeter- Gram- Second system. In CGS system, length is measured in centimeters mass is measured in grams and time is in seconds.
what happens to the force when the distance increases between 2 particales
Two blocks, one of mass 5 kg and the other of mass 2 kg, are attached to opposite ends of a light string and hung vertically from a massless, frictionless pulley. Initially the heavier block is held in place a distance 2.5 m above the floor, the lighter block is just touching the floor, and the cord is taut. Then the heavier block is released and comes crashing to the floor while the cord slackens and the lighter block continues to rise. What is the maximum height reached by the lighter block
Answer:
[tex]H_{max}=3.4m[/tex]
Explanation:
From the question we are told that:
Mass 1 [tex]m_1=5kg[/tex]
Mass [tex]m_2=2kg[/tex]
Distance above floor [tex]d=2.5m[/tex]
Generally the equation for Conservation of energy is mathematically given by
[tex]0.5m_1v^2+0.5m_2v^2=2mg[/tex]
[tex]0.5m_1v^2+0.5m_2v^2=2g(m_1-m_2)[/tex]
[tex]v^2(0.5*m_1+0.5*m_2)=2*g(m_1-m_2)[/tex]
[tex]v^2(0.5*5+0.5*2) = 2 * 9.8 * (5 - 2)[/tex]
[tex]v^2=\frac{58.8}{3.5}[/tex]
[tex]v=4.1m/s[/tex]
Generally the equation for The maximum height of lighter block is mathematically given by
[tex]H_{max}=d+\frac{v^2}{2g}[/tex]
[tex]H_{max}=2.5+\frac{16.2}{2*9.81}[/tex]
[tex]H_{max}=3.4m[/tex]
Define Newton's law of motion?
A 67.3-kg climber is scaling the vertical wall of a mountain. His safety rope is made of a material that, when stretched, behaves like a spring with a spring constant of 1.23 x 103 N/m. He accidentally slips and falls freely for 0.921 m before the rope runs out of slack. How much is the rope stretched when it breaks his fall and momentarily brings him to rest
Answer:
[tex]d=0.59m[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=67.3 kg[/tex]
Spring constant [tex]\mu=1.23 * 10^3 N/m[/tex]
Fall Height [tex]h=0.921m[/tex]
Generally the Energy theorem equation for momentum is mathematically given by
Change in KE=Work done by gravity + work done by spring
[tex]0=mg*(h + d) - \frac{\mu d^2}{2}[/tex]
[tex]0=(67.3 * 9.81 (0.921 + d)) -\frac{(1.23 * 10^3 * d^2}{ 2}[/tex]
[tex]0=608.1-660.213d-615d^2[/tex]
Solving Quadratic equation
[tex]d=0.59m[/tex]
Which of the following is not an example of bias
A. Pro hi FRUCTOSE corn syrup ADVERTISEMENTS paid for by corn farmers
B. anti-smoking articles written by the national health ASSOCIATION
C. anti-by four articles written by a journalist working for it Oil company
D Pro ADHD medicine article written by PHARMACEUTICAL
Answer:
B
Explanation:
The writers are from a trusted source that is considered impartial. The message is backed up by scientific investigation, and the writers have no monetary gain from their message.
The decrease in the intensity of light over distance, such as with increasing depth in water, is known as ______.
Answer:
Attenuation
Step By step Explanation:
The decrease in the intensity of light over distance, such as with increasing depth in water, is known as ______.
It is called attenuation.
The decraese in the amplitude of the signals is called attenuation.
Describe the resistance through a
diode
Explanation:
A diode is an electrical element which offers the flow of current freely in one direction with very less resistance.
The given figure depicts a diode in forward bias, where the p-side and the n-side of the diode are connected to positive and negative terminals respectively. In such a case the current flows from the p-side to n-side of the p-n junction very easily and the value of the current increases rapidly after a certain voltage, this voltage is called threshold voltage.
We can deduce from the graph that the resistance of the diode reduces with increase in voltage. As resistance is given by the formula:
[tex]R=\frac{V}{i}[/tex]
Connected to a battery that offers a d.d.p. of 3.0Volts, we have the four lamps, all identical with resistances equal to 2.0 Ohms. The association appears in the figure. Note that the switch is open, so it doesn't pass current in the circuit (it's like an off switch). When the key closes, the lamps come on. Determining the Req of the association and the total current flowing through the circuit, we will find:
Answer:
Option D. 5Ω e 0.6 A
Explanation:
1. Determination of the equivalent resistance.
We'll begin by calculating the equivalent resistance of resistor B and resistor C. This can be obtained as follow:
Resistor B (R₆) = 2 Ω
Resistor C (R꜀) = 2 Ω
Equivalent Resistance (R₆꜀) =?
R₆꜀ = R₆ × R꜀ / R₆ + R꜀ (parallel connection)
R₆꜀ = 2 × 2 / 2 + 2
R₆꜀ = 4 / 4
R₆꜀ = 1 Ω
Finally, we shall determine the equivalent resistance of the circuit. This can be obtained as follow:
Resistor A (Rₐ) = 2 Ω
Equivalent resistance of resistor B and C (R₆꜀) = 1 Ω
Resistor D (Rₔ) = 2 Ω
Equivalent Resistance (R) =?
R = Rₐ + R₆꜀ + Rₔ (series connection)
R = 2 + 1 + 2
R = 5 Ω
Thus, the equivalent resistance of the circuit is 5 Ω
2. Determination of the total current in the circuit.
Potential difference (V) = 3 V
Equivalent resistance (R) = 5 Ω
Total current (I) =?
V = IR
3 = I × 5
Divide both side by 5
I = 3 / 5
I = 0.6 A
Thus, the total current in the circuit is 0.6 A
Summary:
Equivalent resistance = 5 Ω
Current = 0.6 A
Option D gives the current answer to the question.
which type of image is formed by convex lens on a screen?
Answer:
The type of image formed on a screen by a convex lens is real, enlarged and inverted.
Explanation:
A lens can be defined as a transparent optical instrument that refracts rays of light to produce a real image.
Basically, there are two (2) main types of lens and these includes;
I. Diverging (concave) lens.
II. Converging (convex) lens.
A converging lens refers to a type of lens that typically causes parallel rays of light with respect to its principal axis to come to a focus (converge) and form a real image.
Basically, the type of image formed on a screen by a converging (convex) lens is real, enlarged and inverted because it is usually thick across the middle (causing rays of light to converge) but thin at the lower and upper edges.
Match the synthetic materials with the processes used to make them.
Which two factors affect the size of the gravitational field?
Answer:
Explanation:
mass and distance
As a girl pushes and object across a wood floor she suddenly comes to an area where the floor has been waxed recently making it slippery . What becomes true if the coefficient of kinetic friction
Answer:
This question is incomplete but the completed question is below
As a girl pushes an object across a wood floor, she suddenly comes to an area where the floor has been waxed recently, making it slippery. What becomes true of the coefficient of kinetic friction? A. The coefficient of kinetic friction increases. B. The coefficient of kinetic friction decreases. C. The coefficient of kinetic friction becomes zero. D. The coefficient of kinetic friction becomes negative.
The correct option is B
Explanation:
Coefficient of kinetic friction can be defined as the frictional force resisted by the motion of an object. From the question, it might take the girl to apply a force equivalent to just half that of the weight of the object to overcome friction to keep the object moving on a wood floor. Once she gets to the waxed area, the frictional force reduces, thereby also reducing the coefficient of kinetic friction further. Thus, she will be able to use less than half of the force (equivalent to less than half of the weight of the object) to push the object.
Thus, the correct option is B.
the bodies in this universe attract one another name the scientist who propounded this statement
Answer:
It was proposed by Isaac Newton
Explanation:
The law of universal attraction of expression
F = [tex]G \ \frac{m_1m_2}{ r^2}[/tex]G m1m2 / r ^ 2
where G is a constant, m₁ and m₂ are the masses of the bodies and r the distance between them.
It was proposed by Isaac Newton
With this law Newton explained that the force that pulls the moon towards the earth is the same as that which attracts an apple towards the earth
Amy throws a softball through the air. What are the different forces acting on the ball while it’s in the air?
The softball experiences
force as a result of Amy’s throw. As the ball moves, it experiences
from the air it passes through. It also experiences a downward pull because of
.
Answer:
1.the friction of air, gravity2.gravity
Answer:
The softball experiences an applied force as a result of Amy’s throw. As the ball moves, it experiences drag from the air it passes through. It also experiences a downward pull because of gravity.
Explanation:
Plato
can anyone help me with this?
the question : find the value of the resistors
Answer:
Value of the resistors R = 2 ohm
Explanation:
Given:
Resistor R1 = 4 ohm
Resistor R2 = 4 ohm
Find:
Value of the resistors R
Computation:
We know that Resistor R1 and Resistor R2 connected in parallel series.
So,
Using common resistance in parallel series
⇒ 1/R = 1/R1 + 1/R2
⇒ 1/R = 1/4 + 1/4
⇒ 1/R = (1 + 1) / 4
⇒ 1/R = 2/4
⇒ R = 4/2
⇒ R = 2
Value of the resistors R = 2 ohm
A cylindrical container closed of both end has a radius of 7cm and height of 6cm A.)find the total surface area of the container B.) find the volume of the container
Jake launches a water balloon at an angle of 35° above the horizontal. If he sends it flying with an initial velocity of 3 m/s, how far away does Fred (who is the same height as Jake) need to be for it to hit him (assuming Jake has a good aim)?
Answer:
R = 0.86 m
Explanation:
The formula for the range of the projectile motion can be used here:
[tex]R = \frac{v^2 Sin2\theta}{g}[/tex]
where,
R = Range of projectile = distance between Jake and Fred = ?
v = launch speed = 3 m/s
θ = Launch Angle = 35°
g = acceleration due to gravity = 9.81 m/s²
Therefore,
[tex]R = \frac{(3\ m/s)^2Sin[(2)(35^o)]}{9.81\ m/s^2}\\\\[/tex]
R = 0.86 m
How does your ear work? 6 mark question
Answer:
It collects sound waves and channels them into the ear canal (external auditory meatus), where the sound is amplified. The sound waves then travel toward a flexible, oval membrane at the end of the ear canal called the eardrum, or tympanic membrane. Sound waves cause the eardrum to vibrate.
It collects sound waves and channels them into the ear canal (external auditory meatus), where the sound is amplified. The sound waves then travel toward a flexible, oval membrane at the end of the ear canal called the eardrum, or tympanic membrane. Sound waves cause the eardrum to vibrate. Explanation:
The Outer Ear
The auricle (pinna) is the visible portion of the outer ear. It collects sound waves and channels them into the ear canal (external auditory meatus), where the sound is amplified.
The sound waves then travel toward a flexible, oval membrane at the end of the ear canal called the eardrum, or tympanic membrane. Sound waves cause the eardrum to vibrate.
The Middle Ear
The vibrations from the eardrum set the ossicles into motion. The ossicles are actually tiny bones — the smallest in the human body. The three bones are named after their shapes: the malleus (hammer), incus (anvil) and stapes (stirrup). The ossicles further amplify the sound.
The tiny stapes bone attaches to the oval window that connects the middle ear to the inner ear. The Eustachian tube, which opens into the middle ear, is responsible for equalizing the pressure between the air outside the ear and that within the middle ear.
The Inner Ear
The sound waves enter the inner ear and then into the cochlea, a snail-shaped organ. The cochlea is filled with a fluid that moves in response to the vibrations from the oval window. As the fluid moves, 25,000 nerve endings are set into motion. These nerve endings transform the vibrations into electrical impulses that then travel along the eighth cranial nerve (auditory nerve) to the brain.
The brain then interprets these signals, and this is how we hear.
The inner ear also contains the vestibular organ that is responsible for balance.
three condensers are connected in series across a 150 volt supply. The voltages across them are 40,50 and 60 volts respectively, and the charge on each condenser is 6×10^-8(a) calculate the capacitance of each condenser (b)calculate the effective capacitance of the combination
Explanation:
Given that,
The voltages across them are 40,50 and 60 volts respectively, and the charge on each condenser is 6×10⁻⁸ C.
(a) Capacitance of capacitor 1,
[tex]C_1=\dfrac{Q}{V_1}\\\\C_1=\dfrac{6\times 10^{-8}}{40}\\\\C_1=1.5\times 10^{-9}\ F\\\\C_1=1.5\ nF[/tex]
Capacitance of capacitor 2,
[tex]C_2=\dfrac{Q}{V_2}\\\\C_2=\dfrac{6\times 10^{-8}}{50}\\\\C_2=1.2\times 10^{-9}\ F\\\\C_2=1.2\ nF[/tex]
Capacitance of capacitor 3,
[tex]C_3=\dfrac{Q}{V_3}\\\\C_3=\dfrac{6\times 10^{-8}}{60}\\\\C_3=1\times 10^{-9}\ F\\\\C_3=1\ nF[/tex]
(b) The equivalent capacitance in series combination is :
[tex]\dfrac{1}{C}=\dfrac{1}{C_1}+\dfrac{1}{C_2}+\dfrac{1}{C_3}\\\\\dfrac{1}{C}=\dfrac{1}{1.5}+\dfrac{1}{1.2}+\dfrac{1}{1}\\\\C=0.4\ nF[/tex]
Hence, this is the required solution.
The acceleration of the car with two washers added to the string would be
Answer:
[tex]a=0.33\ m/s^2[/tex]
Explanation:
For washer 2,
v₁ = 0.13 m/s
v₂ = 0.36 m/s
t₁ = 1.92
t₂ = 2.61
We need to find the acceleration of waster 2.
[tex]a=\dfrac{v_2-v_1}{t_2-t_1}\\\\a=\dfrac{0.36-0.13}{2.61-1.92}\\\\a=\dfrac{0.23}{0.69}\\\\a=0.33\ m/s^2[/tex]
So, the acceleration of washer 2 is [tex]0.33\ m/s^2[/tex].
Answer:
.33
Explanation:
!!!!!URGENT!!!!!!
A heater raises the temperature of air in a room from 22 °C to 37
°C with the energy of 7500 J. If the mass of the air is 5 kg, the specific heat
capacity of the air would be
A. 25 J kg^-1 °C^-1
B. 50 J kg^-1 °C^-1
C. 100 J kg^-1 °C^-1
D. 75 J kg^-1 °C^-1
Answer:
The specific heat of air is 100 J/kg°C.
Explanation:
mass, m = 5 kg
Temperature change, T' - T = 37 °C - 22 °C = 15°C
heat, H = 7500 J
let the specific heat of air is c.
The formula of heat is
H = m c (T' - T)
7500 = 5 x c x 15
c = 100 J/kg°C
an object that has lost its electrons become?
Mains electricity is an ac supply. Explain the difference between direct and alternating potential difference.
Direct current (DC) is the flow of electric charge in only one direction. It is the steady state of a constant-voltage circuit. Most well-known applications, however, use a time-varying voltage source. Alternating current (AC) is the flow of electric charge that periodically reverses direction.
#LETS STUDY3. Thekinetic energy of an object of
mass, m moving with a velocity
of 5 ms-t is 25 J. What will be its
Toinetic energy when its velocity
is doubled? What will be its
Icinetic energy ruhen its velocity
is increased three times?
Answer:
1. 100 J
2. 225 J
Explanation:
We'll begin by calculating the mass of the object. This can be obtained as follow:
Velocity (v) = 5 ms¯¹
Kinetic energy (KE) = 25 J
Mass (m) =?
KE = ½mv²
25 = ½ × m × 5²
25 = ½ × m × 25
25 = 25m / 2
Cross multiply
25m = 25 × 2
25m = 50
Divide both side by 25
m = 50 / 25
m = 2 Kg
1. Determination of the kinetic energy when the velocity is doubled.
Mass (m) = 2 Kg
Velocity (v) = double the initial velocity
= 2 × 5 ms¯¹
= 10 ms¯¹
Kinetic energy (KE) =?
KE = ½mv²
KE = ½ × 2 × 10²
KE = ½ × 2 × 100
KE = 100 J
2. Determination of the kinetic energy when the velocity increased three times.
Mass (m) = 2 Kg
Velocity (v) = three times the initial velocity
= 3 × 5 ms¯¹
= 15 ms¯¹
Kinetic energy (KE) =?
KE = ½mv²
KE = ½ × 2 × 15²
KE = ½ × 2 × 225
KE = 225 J
(c) The metal block had a mass of 1.50 kg
The specific heat capacity of the metal was 900 J/kg °C
Calculate the change in thermal energy of the metal during 240 seconds.
Use the Physics Equations Sheet.
Give your answer in kilojoules.
Answer:56
Explanation: I did the test
orange light has a wavelength of 600nm. calculate the frequency if the speed of light in vacuum
the correct answer is ---- 122
what is the Formula for average velocity?
Answer:
Explanation:
Velocity is related to Displacement.
Average velocity = Displacement / Time difference
Question 5 of 10
A 15 N force is applied to an object, which then accelerates at 5.0 m/s2. What
is the mass of the object?
A. 10 kg
B. 20 kg
C. 75 kg
D. 3.0 kg
Hi there!
[tex]\large\boxed{D. \text{ } 3.0 kg}}[/tex]
Use the following equation to solve:
F = ma, where:
F = Force (N)
m = mass (kg)
a = acceleration (m/s²)
Thus:
15 = 5m
15/5 = m
mass = 3 kg
Light strikes a smooth wooden tabletop.
What happens to the light after it is reflected?
The light rays bounce off the table and all move in the same direction.
The light rays bounce off the table and move in different directions.
The light rays pass through the table and all move in the same direction.
The light rays pass through the table and move in different directions.
Answer:
For smooth surface:The light rays bounce off the table and all move in the same direction.
que es la energia electrica
Answer:
:) :) :) :) :) :) :) :) :)
Explanation:
:) :) :) .......