write a program that creates the following array, then calculates and shows the array's maximum value.

Answers

Answer 1

The first two items of the array are examined to see which is the largest, and the largest of these two components is then stored in arr[0].

The largest of the first and third components is then placed in arr[0] after the first and third items have been checked. Up until the first and last elements are verified, this process continues.

#include <stdio.h>

int main() {

 int n;

 double arr[100];

 printf("Enter the number of elements (1 to 100): ");

 scanf("%d", &n);

 for (int i = 0; i < n; ++i) {

   printf("Enter number%d: ", i + 1);

   scanf("%lf", &arr[i]);

 }

 // storing the largest number to arr[0]

 for (int i = 1; i < n; ++i) {

   if (arr[0] < arr[i]) {

     arr[0] = arr[i];

   }

 }

 printf("Largest element = %.2lf", arr[0]);

 return 0;

}

Learn more about elements here-

https://brainly.com/question/13044444

#SPJ4


Related Questions

How many different occupations did George Washington Carver have?

Answers

George Washington Carver had a number of different occupations throughout his life. Carver was a highly accomplished and multi-talented individual who made significant contributions to a wide range of fields.

What were the occupations of George Washington Carver?

Some of the most notable occupations include:

Botanist and plant scientist: Carver was a renowned expert in botany and plant science, and he conducted extensive research on the cultivation and use of different crops, such as peanuts and sweet potatoes.Agricultural chemist: Carver was a pioneering agricultural chemist who developed new methods for improving soil fertility and crop production.Educator: Carver was a dedicated educator who taught at the Tuskegee Institute for over 40 years. He was known for his innovative teaching methods and his ability to inspire students.Artist: Carver was a talented artist who created many drawings and paintings that depicted the beauty and diversity of the natural world.Inventor: Carver was a prolific inventor who created more than 300 different products from peanuts and sweet potatoes, including soap, ink, and paint.

Philanthropist: Carver was a philanthropist who dedicated his life to improving the lives of African Americans through education and scientific research.

He is widely regarded as one of the most important figures in the history of American agriculture and science.

To know more about Inventor, visit: https://brainly.com/question/13262472

#SPJ4

polarity can be changed on a welding machine by pushing a button, rotating a selector switch, or changing how the cables are attached to the machine.

Answers

The polarity of a welding machine can be changed by pushing a button, rotating a selector switch, or adjusting the cable connections. Each method alters the current flow to achieve the desired result.

Welding machines are used to join two pieces of metal together using heat and pressure. The welder must have control of the electrical current in order to properly join the metals. The polarity of the welding machine determines the direction of the electrical current and is essential for successful welding. Changing the polarity can be done in several ways. By pressing a button, rotating a selector switch, or changing the way the cables are attached to the machine, the current flow can be reversed to achieve the desired result. Each method will provide the welder with the control they need to successfully weld the metals together. Understanding how to change the polarity of a welding machine is an important part of the welding process and will ensure that the weld is of the highest quality.

Learn more about connections here-

brainly.com/question/14327370

#SPJ4

that type of construction which walls, partitions, and structural members are of non-combustible materials, but do not qualify as fire resistive.

Answers

Type 2 buildings have non-combustible walls, partitions, columns, floors, and roofs, much like Type 1 structures do.

Although these buildings frequently have fire suppression system, they are unstable and frequently lack fire-resistant coatings. The outside walls and structural parts of Type III building, commonly referred to as ordinary construction, must be composed of noncombustible or minimally combustible materials like concrete blocks or day tile blocks. The highest quality non-combustible materials, such as poured concrete and fire-resistant steel framing, are used to construct Type I buildings, which are rated to withstand fires for two to three hours. The greatest degrees of safety are offered by this rating.

Learn more about system here-

https://brainly.com/question/27162243

#SPJ4

If the electric field between the plates of a given capacitor is weakened, the capacitance of that capacitor:
a) increases.
b) decreases.
c) does not change.
d) cannot be determined from the information given.

Answers

The capacitance of a given capacitor does not change if the electric field between its plates is weakened. Hence, the given option C. is correct.

What is Capacitance in this question?

The capacitance of a capacitor is determined by the properties of its plates (such as their area and separation distance), and the dielectric material between the plates, and is unaffected by the intensity of the electric field between the given plates.

If the electric field is weakened or get low intensity, this would result in a decrease in the voltage across the capacitor, but the capacitance would remain unchanged.

To learn more about Capacitance, visit: https://brainly.com/question/30426172

#SPJ4

That when printing a string, it prints characters at increasing memory addresses until we reach the null terminator (byte 0x00). True or False

Answers

That when printing a string, it prints characters at increasing memory addresses until we reach the null terminator (byte 0x00) .

The correct answer is True .

What are some common operations that can be performed on strings in C++, such as concatenation, slicing, and comparison?

In C++, strings are usually handled as an array of characters, which means that they can be manipulated the usage of various capabilities and operators. A few not unusual operations that can be completed on strings in C++ encompass concatenation, which entails joining two or greater strings collectively to create a brand new string. Other operations encompass reducing, which entails extracting a portion of a string based on its position or duration, and evaluation, which involves evaluating two strings to determine if they are equal or if one is greater or much less than the other. Different not unusual operations on strings encompass locating the duration of a string, trying to find particular characters or substrings, and enhancing or changing characters inside a string.

To know more about Encompass visit:

https://brainly.com/question/13753880

#SPJ4

Given variables strength, speed, and direction, declare and assign the following pointers:
integer pointer strengthPointer is assigned with the address of strength.
double pointer speedPointer is assigned with the address of speed.
character pointer directionPointer is assigned with the address of direction.
Ex: If the input is 5 35.0 N, then the output is:
Hurricane level: 5
Speed: 35.0 miles per hour
Direction: N
#include
#include
using namespace std;
int main() {
int strength;
double speed;
char direction;
/* Your code goes here */
cin >> strength;
cin >> speed;
cin >> direction;
cout << "Hurricane level: " << *strengthPointer << endl;
cout << "Speed: " << fixed << setprecision(1) << *speedPointer << " miles per hour" << endl;
cout << "Direction: " << *directionPointer << endl;
return 0;
}

Answers

Integer pointer strengthPointer is assigned with the address of strength.

#include <iostream>

#include <iomanip>

using namespace std;

int main()

{

int strength;

double speed;

char direction;

/* Your code goes here */

//initialized strength pointer

int * strengthPointer = &strength;

//initialized speed pointer

double * speedPointer = &speed;

//initialized direction pointer

char * directionPointer = &direction;

cin >> strength;

cin >> speed;

cin >> direction;

cout << "Hurricane level: " << *strengthPointer << endl;

cout << "Speed: " << fixed << setprecision(1) << *speedPointer << " miles per hour" << endl;

cout << "Direction: " << *directionPointer << endl;

return 0;

}

A pointer variable is declared same like a normal variable but contains asterisk * in between data type and variable name.

E.g. int * variable_name;

Also to initialize a pointer we provide it address of same data type.

e.g. if there is an integer type variable x, then a pointer named p will have address of x as:

p = &x;

or both initialization and declaration can be done together as:

int * p = &x;

Here is the sample output of above code:

Learn more about pointer

https://brainly.com/question/30460618

#SPJ1

Find the linear approximation of the following functions (using Taylor series): (a) e^xu close to equilibrium point x=0,u=1

Answers

The correct answer is Using a Taylor series, a number is approximated by a polynomial whose value is extremely close to the value of the number in the vicinity of a given x value: f (x) equals f (a) plus f ′ (a) 1! ( x − a ) + f ′ ′ ( a ) 2 !

Near x=a, the second-order Taylor polynomial approximates f(x) more well than the linear approximation (which is the same as the first-order Taylor polynomial). We may use it to do things like determine the local minimum or maximum of the function f. (x). By utilising the formula L(x) = f(a) + f '(a) (x - a), where f '(a) is the derivative of f(x) at an x = a, one may determine the linear approximation, which is indicated by L(x). The difference between an exact value and an approximation to it is the approximation error in a data value.

To learn more about Taylor click on the link below:

brainly.com/question/29733106

#SPJ4

Off the southern coast of Andorra in the Mediterranean Sea lies the island of Duosomata (pronounced DOO-oh-so-MAH-ta). It is populated exclusively by short people and tall people. No people of average height live on the island. We can use the following predicates to say things about the people of Duosomata.
person(x)



x is a person.

short(x)



Person x is short.

tall(x)



Person x is tall.

taller(x, y)



Person x is taller than person y.

Answer the following questions by writing expressions in predicate calculus that use these predicates. Assume that quantified variables range over all possible objects, not just people, and not just people from Duosomata.

1a. (5 points.) Write an expression that means ‘‘If there are any two people, and the first person is taller than the second person, then the first person is tall, and the second person is short.’’

1b. (5 points.) Write an expression that means ‘‘At least one tall person is taller than any short person.’’

1c. (10 points.) Suppose that this is true:

¬ ∃s ∃t [person(s) ∧ person(t) ∧ short(s) ∧ tall(t) ∧ taller(s, t)]

Then prove that this is true:

∀s ∀t [(person(s) ∧ person(t) ∧ short(s) ∧ tall(t)) → ¬ taller(s, t)]

Your proof must be written as a series of steps. Each step must be an expression in predicate calculus. You must give a reason for each step.

Answers

1a. (∀x)(∀y)((person(x) ∧ person(y) ∧ taller(x, y)) → (tall(x) ∧ short(y)))

1b. (∃x)(tall(x)(∀y)(short(y) → taller(x, y)))

How can we show the proof?

1c.

Proof:

Step 1:

Assume (person(s) ∧ person(t) ∧ short(s) ∧ tall(t))

Step 2:

From Step 1, we know that (person(s) ∧ person(t) ∧ short(s) ∧ tall(t)) is true.

Step 3:

Assume ¬ taller(s, t) is false, i.e. taller(s, t) is true.

Step 4:

From Step 3, taller(s, t) is true, which contradicts the assumption in (1c) that ¬ ∃s ∃t [person(s) ∧ person(t) ∧ short(s) ∧ tall(t) ∧ taller(s, t)].

Step 5:

From Step 4, it follows that ¬ taller(s, t) must be true, i.e. (person(s) ∧ person(t) ∧ short(s) ∧ tall(t)) → ¬ taller(s, t) is true.

Step 6:

Since Step 5 holds for any s and t that satisfy (person(s) ∧ person(t) ∧ short(s) ∧ tall(t)), it follows that

(∀s)(∀t)((person(s) ∧ person(t) ∧ short(s) ∧ tall(t)) → ¬ taller(s, t)) is true.

Hence, the proof is complete.

learn more about proof: https://brainly.com/question/29969150

#SPJ1

Task 6: Create a new directory called "Test.Dir" using the mkdir command. After it is created, delete the directory by using the rmdir command. I Task 7: We now want to navigate to the directory logically one level above us, so we will use the change directory command, "cd ..". Now we want to move up another level, so we will run the command again. We then want to move back into the original directory, so we will use the cd command again, this time we will use the relative path, which starts with a ./ and then should be pointed to ust/[username).

Answers

To create and delete the "Test.Dir" directory, we used the mkdir and rmdir commands. To move up one level, we used the change directory command (cd ..). To move back, we used the relative path cd ./[username].

To create a new directory called "Test.Dir" we used the mkdir command. This command creates a directory with the name specified. Once this directory was created, we then wanted to delete it. To delete the directory, we used the rmdir command. This command removes the specified directory.

After we had created and deleted the directory, we wanted to navigate to the directory logically one level above us. To do this, we used the change directory command, "cd ..". This command moves us one level up the directory tree. We then wanted to move up another level, so we ran the command again.

Finally, we wanted to move back into the original directory, so we used the cd command again. This time, we used the relative path which starts with a ./ and then should be pointed to ust/[username]. This command allows us to move back to the original directory.

Learn more about Commands here-

https://brainly.com/question/30319932

#SPJ4

is circuit switching which are true dedicated circuit connection overhead requires reassebly

Answers

No, circuit switching creates a dedicated connection and does not require reassembly of data packets, making it a more efficient method of communication.

No, circuit switching creates a dedicated connection between the sender and receiver that does not require packet reassembly, making it more efficient for transmitting data over an uninterrupted connection.

This method is commonly used in telephone networks to ensure reliable and uninterrupted communication.

While circuit switching is efficient and reliable, it is less flexible than packet switching.

Packet switching breaks data into packets for transmission, allowing for greater flexibility and network resource sharing.

The choice between circuit switching and packet switching depends on the specific needs of the application or network being used.

Learn more about circuit switching here:

https://brainly.com/question/14402768

#SPJ4

Use the following transfer function G(s) to evaluate the root locus conditions for each of the cases given. This system G(s) is in the feedback given in Problem 2 with a proportional controller. s+5 K(s) = K G(s) = 8+ $6 + 28 (a) Use the root locus angle condition to show that it is possible to place a closed loop pole at -2. Find the gain K that will place a pole at this location. (b) Use the root locus angle condition to show that it is not possible to place any closed loop pole at -7. (c) Use the root locus angle condition to show that it is possible to place a closed loopP pole at -15. Find the gain K that will place a pole at this location. 2. Consider the feedback loop below with plant G(s) and proportional controller K(s) = K. Use the Routh- Hurwitz criterion to determine the full range of K that produces a stable feedback system GcL(s). s+6 G(s) = 3 + 4s2 + 3s R(S) K(s) G(s)

Answers

A mathematical function that theoretically represents the output of a system, sub-system, or component for each potential input is called a transfer function in engineering. Electronics and control systems use them extensively.

How do transfer function and Six Sigma relate to one another?

Transfer functions, a key element of Design for Six Sigma, offer the necessary connections between design, process, and materials characteristics and the CTQs in the cycle of developing products and processes.

Are transfer function and frequency response the same?

In reality, a system's frequency response can be determined by replacing s = j to determine its transfer function. The frequency response H(j) is typically complex, including both real and fictitious components. Polar coordinates are frequently more helpful and understandable when used to convey this.

To know more about transfer function visit :-

https://brainly.com/question/13002430

#SPJ4

where is the torque converter clutch solenoid located

Answers

The torque converter clutch solenoid is located in the transmission, usually either in the valve body or mounted to the transmission case.

What is Torgue?
Torgue is a brand of weapons and ammunition manufactured by the company, Torgue Corporation, in the Borderlands universe. Torgue weapons are known for their high damage output, usually at the cost of accuracy or fire rate. Torgue products are often highly explosive, focusing on area of effect damage, and feature a distinctive orange and yellow color scheme. The company is also known for its colorful and aggressive advertising campaigns, often featuring the slogan "More Boom, Less Wimp!" Torgue weapons excel when fighting large groups of enemies, and are often favored by those looking for maximum destruction.

To know more about Torque
https://brainly.com/question/20691242
#SPJ4

in order to prove the correctness of this algorithm, start by showing the following property: any square of size d d in the plane contains at most four points of l. (b) now show that the algorithm is correct. the only case which needs careful consideration is when the closest pair is split between l and r

Answers

The two methods below are both intended to calculate the sum of squares from 1 to n, where n is any positive number.

To obtain the inverse of a given function, follow these steps: The square root is 2 added, 3 divided, 2 subtracted. The task is assigned to us; begin with the letter "n" Add 2. Increase the outcome by 3. Deduct 10 from that outcome. Square the resultant figure. A function that reverses the effects of another function is called an inverse function. Thus, the following are the methods to obtain the inverse of the aforementioned function: The square root is 2 added, 3 divided, 2 subtracted. The two methods below are both intended to calculate the sum of squares from 1 to n, where n is any positive number. A set of instructions known as an algorithm is used to solve problems by doing calculations, data processing, and automated reasoning.  

Learn more about An inverse function here:

https://brainly.com/question/28573734

#SPJ4

A reciprocating piston compressor has the following:
-Piston diameter of 300mm,
-Stroke of 450mm,
-Intake pressure of 1 bar,
-Intake temperature of air at 200C,
-Clearance volume of 3%,
-Rotational speed N = 250rev/min,
-Discharge pressure = 40 bar,
-Compression and Re-expansion are polytropic process with k = 1.25
a) Find the compressor’s characteristics (V,P T at all points A,B, C, D).
b) Calculate the work and power of the compressor.

Answers

The work and power of the compressor are 599.68 kJ/kmol and 57772.8 kW respectively.

What is compressor ?

A compressor is a device used to compress, or reduce the size of, data. It is used to reduce the amount of space taken up by a file so that it takes up less storage space, or to reduce the amount of bandwidth required for streaming or transmission. Compressors can also be used to reduce the size of audio or video files for easier storage, or for faster transmission over the internet. The compressor characteristics can be calculated using the ideal gas law equation and the polytropic equation.

At point A (intake pressure and temperature):

[tex]V = (RT/P) = (287*200/1) = 57.4 m3/kmol[/tex]

P = 1 bar

T = 200C

At point B (Compression):

[tex]V2/V1 = (P2/P1)^(1-k)V2 = V1 * (P2/P1)^(1-k)V2 = 57.4 * (40/1)^(1-1.25) = 16.31 m3/kmolP2 = 40 barT2 = T1 * (V2/V1)^(k-1)T2 = 200 * (16.31/57.4)^(1.25-1) = 585.6C[/tex]

At point C (Clearance volume):

[tex]V3 = V2 * (1+3/100) = 16.68 m3/kmol[/tex]

P3 = P2 = 40 bar

T3 = T2 = 585.6C

At point D (Discharge pressure):

[tex]V4/V3 = (P4/P3)^(1-k)V4 = V3 * (P4/P3)^(1-k)V4 = 16.68 * (1/40)^(1-1.25) = 57.78 m3/kmol[/tex]

P4 = 1 bar

[tex]T4 = T3 * (V4/V3)^(k-1)T4 = 585.6 * (57.78/16.68)^(1.25-1) = 197.6C[/tex]

b)The work of the compressor can be calculated using the following equation:

[tex]Work = (P2*V2 - P1*V1)/kWork = (40*16.31 - 1*57.4)/1.25 = 599.68 kJ/kmol[/tex]

The power of the compressor can be calculated using the following equation:

[tex]Power = (2*π*N*Work)/60Power = (2*3.14*250*599.68)/60 = 57772.8 kW[/tex]

The work and power of the compressor are 599.68 kJ/kmol and 57772.8 kW respectively.

To learn more about compressor visit

brainly.com/question/29345949

#SPJ1

an axial force p is applied to the shaft with thrust bearing shown. the bearing consists of a circular collar a that is bonded to the shaft b. applying a factor of safety of 1.5, determine the maximum axial force p that can be applied to the shaft without exceeding the allowable shear stress along cylindrical surface a or b. (shear failure along surface a would mean that whatever is used to bond the collar to the shaft has failed. shear failure along surface b would mean that the fixture c, which prevents the collar from moving to the right, has failed). both the bonding material and the material from which part c is made have a failure shear stress of 255 mpa.

Answers

The maximum axial force that can be applied to the shaft is 382.5 kN.The maximum axial force that can be applied to the shaft is 382.5 kN.

What is the significance of the failure shear stress of 255 MPa for the bonding material and fixture used in the thrust bearing?

The failure shear stress of 255 MPa is a critical parameter for the bonding material and fixture used in the thrust bearing. This value represents the maximum shear stress that the material can withstand before it fails, and is an important consideration in designing the thrust bearing to support the applied axial force. If the applied force exceeds the allowable shear stress, the bonding material or fixture may fail, leading to catastrophic failure of the bearing and damage to the shaft or other components. Therefore, it is essential to ensure that the maximum axial force is calculated and limited to a level that does not exceed the failure shear stress of the bonding material or fixture.

To know more about Axial Force visit:

https://brainly.com/question/13137098

#SPJ4

it is illegal to improperly dispose of antifreeze.

Answers

Yes, that's correct. Improper disposal of antifreeze is illegal because it can be harmful to the environment and to wildlife.

What is Antifreeze?

Antifreeze is a toxic substance and if it is not disposed of properly, it can contaminate groundwater and other bodies of water, which can have devastating effects on the ecosystem. Additionally, antifreeze can be attractive to animals and birds because of its sweet taste, but it is highly toxic and can cause death if consumed in even small quantities.

In many jurisdictions, it is required by law to properly dispose of antifreeze by taking it to a recycling center or hazardous waste facility. The specific regulations vary from place to place, so it is important to check the local laws and guidelines in your area to ensure that you are properly disposing of antifreeze and other hazardous waste materials.

To learn more about hazardous waste, visit: https://brainly.com/question/28615813

#SPJ4

What is the optimum replacement time interval?

Answers

The best replacement period will vary depending on the particular item being considered as well as a number of criteria like the item's intended use and the manufacturer's recommendations.

Does ETOPS apply to aircraft with four engines?

The new ETOPS requirement does not apply to freighters with three and four engines. Additionally, this regulation formalizes polar policy obligations for operators whose intended air routes cross the North and South Polar regions.

When was ETOPS put into action?

For these reasons, the US enacted the initial rules that would later develop into the ETOPS criteria that are familiar to us today in 1953. These first regulations limited the routes that two- or three-engine aircraft might take in order to enforce the "60-minute rule."

To know more about manufacturer's visit:-

https://brainly.com/question/30289320

#SPJ4

What is risk mitigation strategies in project management?

Answers

Risk mitigation is the activity of minimizing the effects of probable hazards by creating a strategy to manage, eradicate, or maximally limit setbacks.

Which three mitigating tactics are there?

Examples of mitigation solutions include hazard-specific controls like flood levees or bushfire prevention programmes.  the creation of infrastructure or service enhancements. decisions about land use that steer clear of building developments and public infrastructure in risky areas.

Which five mitigating tactics are there?

some are trivial, some are disastrous. Your capacity for risk mitigation enables you to proactively recognize and manage risks. Let's discuss the four different risk-mitigation bof avoidance, acceptance, reduction/control, and transfer.

To know more about hazards visit:-

https://brainly.com/question/30579498

#SPJ4

The ball has a mass m and is attached to the cord of length l. The cord is tied at the top to a swivel and the ball is given a velocity v_0. Show that the angle theta which the cord makes with the vertical as the ball travels around the circular path must satisfy the equation tan theta sin theta = upsilon^2_0/gl. Neglect air resistance and the size of the ball.

Answers

The string of length l is used to secure the mass m of the ball. The ball is given a velocity of v 0, and the cord is attached at the top to a swivel.

When the ball goes around the circular path, demonstrate that the angle theta that the cord makes with the vertical must meet the equation tan theta sin theta = upsilon2 0/gl. A 5 lb particle's course of travel in the horizontal plane is denoted by the polar coordinates r=(2t+1)ft and =(0.5t2t)rad, where t is measured in seconds. For t=2s, calculate the size of the imbalanced force affecting the particle. A string of length L with a pivot point at point O holding a ball of mass m is attached.

Learn more about length here:

https://brainly.com/question/30100801

#SPJ4

add the following two's complement binary numbers. what is the decimal value of each addend? what is the decimal value of the sum? is there overflow? (remember that when there's overflow, the sum doesn't match what is expected from the addition. show the decimal value of the binary sum, not what was expected from adding the decimal values.)

Answers

Binary operators are defined as those that operate on two operands.

A simple method for assessing numerical values and character strings is provided by operators, which are stated using special characters.

What are operations and the many varieties of them?

In computer science, an operator is a letter or group of letters that determines the action to be executed or the elements to be considered. Arithmetic players, relation operations, and logical operators are the three main types of operators used by programmers.

How is an operator defined in C?

To put it another way, an operator is a symbol that tells the compiler to do specific logical, mathematical, or conditional operations. It performs as a symbol on an integer or even a variable. The operators to utilize, for instance, are + and -.

To know more about operator visit:

https://brainly.com/question/29765525

#SPJ4

Which of the following statements best describes the relationship of cost to communication in a design-bid-build process?

Communication is timely and fast because all phases work together in a single team, which keeps costs from mistakes low.
Communication is timely and fast because all phases work together in a single team, which keeps costs from mistakes low.
The separation of phases into distinct parts with different teams means that communication doesn’t flow as freely between phases, which can lead to misunderstandings and cost overruns from mistakes.
The separation of phases into distinct parts with different teams means that communication doesn’t flow as freely between phases, which can lead to misunderstandings and cost overruns from mistakes.
The communication process in the design-bid-build is often confusing, which can lead to misunderstandings and cost overruns from mistakes.
The communication process in the design-bid-build is often confusing, which can lead to misunderstandings and cost overruns from mistakes.
Communication flows through well-defined channels, ensuring project leaders get the specific information they need to keep projects running efficiently without costly mistakes.

Answers

The statement that best describes the relationship of cost to communication in a design-bid-build process is:

"The separation of phases into distinct parts with different teams means that communication doesn't flow as freely between phases, which can lead to misunderstandings and cost overruns from mistakes." (Option C)

What is the justification for the above response?

In the design-bid-build process, different teams typically handle different phases of the project, such as design, pre-construction, and construction. This separation of phases can make communication between teams more difficult and lead to misunderstandings, which can result in costly mistakes and delays.

Therefore, effective communication and coordination are critical to managing costs in a design-bid-build process, and the lack of communication can result in cost overruns and delays.

Learn more about communication  at:

https://brainly.com/question/12623594

#SPJ1

if the tension developed in either cable ab or ac can not exceeded 800 lb, the maximum tension that can be developed in cable ad when it is tightened by the turnbuckle is [ select ] lb. also, the force developed along the antenna tower at point a is [ select ] lb?

Answers

In the direction from A to E, the force created along the antenna at point A is roughly 1998 lb.

Where is the stress at its highest?

The tension in the string is largest at the mean position and minimal at the extreme position for a simple oscillating pendulum.

We can apply the method of sections to calculate the maximum tension in cable AD. A slice through cables AB and AD reveals the following:

Sum of vertical forces = 0

T_AD*sin(60) - T_AB = 0

T_AD = T_AB/sin(60) = T_AB/0.866

Taking a section through cables AC and AD, we have:

Sum of vertical forces = 0

T_AD*sin(60) - T_AC = 0

T_AD = T_AC/sin(60) = T_AC/0.866

Since the tension in either cable AB or AC cannot exceed 1000 lb, the maximum tension that can be developed in cable AD is:

T_AD = 1000/0.866 = 1154 lb (rounded to the nearest lb)

To determine the force developed along the antenna at point A, we can use the method of joints. Taking joint A, we have:

Sum of horizontal forces = 0

F_AEcos(30) + T_ADcos(60) = 0

F_AE = -T_ADcos(60)/cos(30) = -T_ADsqrt(3) = -1998 lb (rounded to the nearest lb, assuming T_AD = 1154 lb)

To know more about maximum tension visit:-

https://brainly.com/question/13251741

#SPJ4

Consider the Cats and Mice problem: Three cats and three mice wish to cross from the left side to the right side of the river using a single boat. The boat can only hold two animals and can be rowed by any animal in the group. The goal is to find a sequence of moves that transfers all six animals to the right hand side of the river. At no time can the cats outnumber the mice on either side of the river. Your task is to formulate this as a search problem.
(6 pts) List all the heuristics below that are admissible:
(1) h1(n) = number of animals on the left bank
(2) h2(n) = number of animals on the left bank − 1
(3) h3(n) = h ∗ (n) (i.e., the true remaining path cost)
(4) h4(n) = 0
(5) h5(n) = 2
(6) h6(n) = ( 1 : boat on left 0 : boat on right
(7) h7(n) = min(2, h ∗ (n))
(8) h8(n) = max(2, h ∗ (n))
(9) h9(n) = maximum of any two admissible heuristics

Answers

h (1) =-75. h(n)=h(n-1)-10 {....[1]}. Using [1] with n=2, we have; h(2) =h(1)-10=-75-10=-85.

Likewise for n=3, h (3) =h(3)-10=-85-10=-95 and so forth. the TV show we watch; -75, -85,-95, This is a set of arithmetic operations where the common difference (d) equals 10. Since, -85-(-75) =-85+75=-10 {, } 95-(85)=95+(85)=10, and so forth. Initial term (a) = -75. the following is the Explicit Formula for Arithmetic Sequence: a {1} =a+(n-1) d where the first term is a, The frequent distinction is d, and The number of terms is n. We have to find the explicit formula for h(n); Substitute the given values we have; h(n)=-75+(n-1) (-10) or h(n)-75-10 n+10=-65-10 n Therefore, the explicit formula for h(n) is, -65-10 n, h(n)=a+(n-1) d. Formalize the claim that n2 + n + 1 is within O(n2). This implies that we must demonstrate the existence of a constant c for all values of nk.

Learn more about Explicit formula here:

https://brainly.com/question/28751433

#SPJ4

2.8.2 complete the program with four more print statements to output the following figure with asterisks. do not add spaces after the last character on each line. ***** * * ***** * * ***** note: whitespace (blank spaces/blank lines) matters; make sure your whitespace matches exactly the expected output.

Answers

The given output that matches the characters with asterisks are:

print('*****')print(' ')print('*****')print(' ')print('*****')

What is the Print function?

The print() function outputs the message to the normal output device, such as the screen. The message can be a string or any other object, and before it is displayed on the screen, the object will be changed into a string.

This is used to display the output of a desired result and is an important part of aspect of programming as it helps to show the output./

Read more about print command here:

https://brainly.com/question/13243443

#SPJ1

Output the following figure with asterisks. Do not add spaces after the last character in each line.

*****

*****

*****

Note: Whitespace (blank spaces / blank lines) matters; make sure your whitespace exactly matches the expected output.

for which there is an institutional network connected to the Internet. Suppose that the average object size is 850,000 bits and that the average request rate from the institution’s browsers to the origin servers is 16 requests per second. Also suppose that the amount of time it takes from when the router on the Internet side of the access link forwards an HTTP request until it receives the response is three seconds on average (see Section 2.2.5). Model the total average response time as the sum of the average access delay (that is, the delay from Internet router to institution router) and the average Internet delay.For the average access delay, use Δ/(1 – Δ·β), where Δ is the average time required to send an object over the access link and β is the arrival rate of objects to the access link.Find the total average response time.Now suppose a cache is installed in the institutional LAN. Suppose the miss rate is 0.4. Find the total response time

Answers

The total average time required to send an object over the access link and β is the arrival rate of objects to the access link is 3.349 seconds

Elaborating the problem:

The average access delay, use δ/(1 − δβ)

where :

δ is the average time required to send an object .

β is the arrival rate of objects to the access link.

a) Total average response time:

δ = 850,000 bits / 16000000 bps = 0.0531 Sec

δβ = 0.053 sec/request × 16 request/sec = 0.848

δ/(1 − δβ) = 0.0531/(1-0.848)

= 0.0531/ 0.152

= 0.349

Total average response time= 0.349+3 = 3.349 Sec

b) Total response time

miss rate =0.4

miss rate + hit rate = 1.0 (100%)

hit rate = 1.0 - 0.4 = 0.6

Since 60% of requests are fulfilled within the institutional Network, the traffic intensity on the access link is reduced by 60%, resulting in an average access delay of  0.0531 / (1-0.349 ×0.848)

= 0.0531/(1-0.2959)

= 0.0531/0.7

= 0.075 seconds

When the cache fulfills the request, which has a probability of 0.6, the response time is nearly zero.

The average response time is 0.075+ 3 seconds.

= 3.075 seconds ( which happens 40 % of the time)

So average response time = 0.6 × 0 sec + 0.4 × 3.075 sec

= 1.23 seconds

Thus the average response time reduced from 3.349 seconds to 1.23 seconds.

What does the LAN serve?

Sharing resources is the primary purpose of LANs. When connected to a network, expensive hardware like CD/ROM drives and laser printers can be shared by multiple users. Additionally, the cost of purchasing software for each computer is reduced by purchasing a network version.

Learn more about LAN network:

brainly.com/question/14242759

#SPJ1

Find the concentration in (a) mg/L, (b) ppm, (c) ppb, and (d) moles/L (M), respectively, for the following solution: 1.5 g of NaCl dissolved in 500 mL of water The total organic carbon concentration of a water is 4 mu g/L. Express this concentration in units of (a) mg/L, (b) ppm, and (c) ppb. The air quality standard of SO_2 is 0.14 ppm. Check to see if the measured SO_2 concentration of 450 mu g/m^3 at 25 degree C and latm exceeds the standard.

Answers

(a) 1.5 g/500 mL = 3000 mg/L; (b) 3000 mg/L = 3 ppm; (c) 4 mu g/L = 0.004 ppb; (d) 1.5 g/500 mL = 0.003 M. (a) 4 mu g/L = 0.004 mg/L; (b) 0.004 mg/L = 0.004 ppm; (c) 0.004 ppm = 4 ppb. Yes, the measured SO_2 concentration exceeds the standard.

The concentration of a solution can be expressed in different units. For the given solution of 1.5 g of NaCl dissolved in 500 mL of water, the concentration can be expressed in (a) mg/L, (b) ppm, (c) ppb, and (d) moles/L (M). To convert to mg/L, the mass of solute (1.5 g) is divided by the volume of solution (500 mL), resulting in 3000 mg/L. To convert to ppm, the concentration of 3000 mg/L is multiplied by 1000, resulting in 3 ppm. To convert to ppb, the concentration of 4 mu g/L is divided by 1000, resulting in 0.004 ppb. To convert to moles/L, the mass of NaCl (1.5 g) is divided by its molar mass (58.44 g/mol), then multiplied by 1000 to get the volume (L) of the solution, resulting in 0.003 M. For the given total organic carbon concentration in water, 4 mu g/L, this can be converted to (a) mg/L by multiplying by 1000, resulting in 0.004 mg/L. To convert to ppm, the concentration of 0.004 mg/L is multiplied by 1000, resulting in 0.004 ppm. To convert to ppb, the concentration of 0.004 ppm is multiplied by 1000, resulting in 4 ppb. For the given air quality standard of SO_2 of 0.14 ppm, and the measured SO_2 concentration of 450 mu g/[tex]m^3[/tex] at 25 degree C and latm, the measured SO_2 concentration exceeds the standard.

Learn more about concentration here

https://brainly.com/question/10725862

#SPJ4

1.
-Assume you are given an int variable named nPositive and a 2-dimensional array of ints that has been created and assigned to a2d. Write some statements that compute the number of all the elements in the entire 2-dimensional array that are greater than zero and assign the value to nPositive. (4 pts)
-Write a 'main' method that examines its command-line arguments and (3 pts)
calls the (static) method displayHelp if the only argument is the class name. Note that displayHelp accepts no parameters
otherwise, 'main' calls the (static) method argsError if the number of arguments is less than four. argsError accepts the number of arguments (an integer) as its parameter
otherwise, 'main' calls the (static) method processArgs, which accepts the command-line argument array as its parameter.
-Write the Java code to create an array with 4 integers: 3, 8, 7, 6. Declare and initialize this array in your code and then compute the mean value of these 4 numbers (you must use a loop). (3 pts)

Answers

1.int nPositive = 0;for (int i = 0; i < a2d.length; i++) {for (int j = 0; j < a2d[i].length; j++) { if (a2d[i][j] > 0) {nPositive++; } } }

 

What is Positive?  

Positive is having a positive outlook on life. It is the attitude of looking at the bright side of things and having an optimistic view of life. Positive thinking can help to reduce stress, improve mental and physical health, and increase overall happiness. Positive thinking can be cultivated through mindfulness, gratitude practices, and reframing negative thoughts.

2.public static void main(String[] args) {  if(args.length == 1 && args[0].equals(MyClass.class.getName())) {displayHelp(); } else if (args.length < 4) {argsError(args.length);} else { processArgs(args); } }

3.int[] myArray = {3, 8, 7, 6};int sum = 0;for (int i=0; i<myArray.length; i++) {

sum += myArray[i]; } double mean = sum/myArray.length;

To learn more about Positive

https://brainly.com/question/28632127

#SPJ4

What are the symbols in a circuit?

Answers

Electrical symbols are the ones most frequently used in circuit diagrams. Amplifiers (shown by triangle shapes) in your circuit amplify the output signal. Your system's capacitors (parallel lines) store energy, but resistors (zigzag lines) lower current flow.

Which five electrical symbols are there?

Electrical terminology uses the following five symbols: switch, wire, contactor, motor, and transformer. Any electrical sketch can use these icons.

What constitutes a circuit?

A basic circuit has the three elements that are required to establish a working electric circuit, namely a source of voltage, a conductive route, and a resistor. The route an electric current takes is known as a circuit.

To know more about electrical visit:-

brainly.com/question/13019820

#SPJ4

if hard-core hackers use agile principles, they can claim that the work they do is agile, because agile do not emphasize planning at all. True or False

Answers

False.

While it is true that Agile principles do prioritize flexibility and adaptability, they do not discard planning entirely. Agile methodologies such as Scrum and Kanban, for example, have planning phases as a core part of their processes. Planning in Agile is done in shorter cycles or sprints, with the goal of continuously refining and adjusting the plan as new information is discovered or priorities change. Even though Agile encourages flexibility and adaptation, planning is still an essential part of the process to ensure the work is aligned with the overall goals and objectives. Therefore, hard-core hackers cannot claim that their work is Agile just because it does not emphasize planning.

What is Agile methodologies?

Agile methodologies refer to a set of values, principles, and practices for software development and project management that prioritize flexibility, collaboration, and continuous improvement. The Agile approach emphasizes adaptive planning, iterative development, and delivering small, incremental releases rather than a single, large release. The goal of Agile is to enable teams to respond quickly to changes in requirements or priorities and deliver high-quality products that meet the needs of the customer.

To know more about software development visit: https://brainly.com/question/20543449

#SPJ4

A centric load P is applied to the granite block shown. The resulting maximum value of the shearing stress in the block is 3.4 ksi. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. 6 in. 6 in. Determine the normal stress exerted on that surface. (Input the answer with the appropriate sign.) The normal stress exerted on that surface is ___ksi.

Answers

The presented statement states that -3.4ksi is the typical stress applied to the surface.

What causes shear stress?

The element of tension that acts perpendicular to a substance cross section is known as shear stress. The most frequent cause of shear stress here is that when forces are exerted in a straight line parallel to a surface, such as when blood flows through vascular tissue and interacts with the artery wall, causing fluid shear stress.

What really is shear stress easily explained?

"A sort of stress who acts coplanar with the cross - sectional area of material," is how shearing stress is defined. Shear forces cause shear stress to develop. They are a pair of equal-but-opposed-direction forces that are acting on separate sides of a body.

Normal stress on that surface at θ=45°

бθ= σysin²θ

so, =-244.8/36*sin²45

so, =-3.4ksi

To know more about shear stress visit:

https://brainly.com/question/14418799

#SPJ4

Other Questions
Analyze the linear inequalities and determine if the solution set is the shaded region above or below the boundaryline.Warm-Upy> -1.4x +7y> 3x-2y -x-42y < 3xy Industrialization:Question 2Which of the following were important inventions that cameout of the Industrial Revolution?Choose all that apply:The Cotton GinThe TelegraphThe TelephoneThe Sewing Machine the population of a school is 800 students and is increasing at a rate of 2%per year. If the cost of labor is the only variable cost that the firm faces, what is the cost incurred by the business for each additional unit oflabor?O $16O $10O $50O $80 When performing a cranking current test: if a remote starter switch cannot be used, the ______ system must be disabled. herbivory on brassica plants can induce the production of defensive chemicals such as glucosinolates. for example, one of the effects of these chemicals is to inhibit the growth of plant-eating caterpillars. explain other ways in which they can provide a defense for plants from being eaten? Find the value of x 3x7x+10 ^imagine I will mark you brainiest!Which of the following choices would be an effective thesis statement for a persuasive essay?A) Too many people are overdosing and dying because of illegal drugs, and our community needs to fund more programs for rehabilitation, to support sober living facilities, and to reach out to at-risk youth.B) Too many people are overdosing and dying in our community.C) Last year alone, over fifty young people in our community died because of illegal drugs. when an enzyme binds to a substrate, most of the time, only one specific amino acid in the active center is involved in binding. T/F While out camping one spring night, you think the moon looks orange. What is one possible explanation?AThe moon is in its orange phase.BThe sun is orange, and the moon is reflecting its reddish light.CThe moon itself is giving off an orange light.DThe dust in the atmosphere makes the moon appear orange. A 2020 study showed that the presence of male pattern baldness and a severe reaction to COVID-19 had a strong association, so some suggested that having male pattern baldness might somehow cause a person to have a severe reaction to COVID-19 (since they had been bald before catching COVID-19, so that the disease could not have caused their baldness). Which option below was most likely a lurking variable?AgeDietHeightWeight Selon vous, peut-on considrer le travail comme une drogue. When you are approaching an oncoming vehicle, you must switch to your low beam headlights within ( ) feet of the oncoming vehicleA) 500B) 200C) 300D) 400 Did Marion's essay convince you that driverless cars should not be allowed? If so, which data are the most compelling? eastern europe uses nuclear energy for electricity production at a higher proportion compared to other parts of the world. endospores survive a variety of harsh conditions in part because of the presence of Evaluate 2+8m if m = 4 Write the following ratio in simplest form: 32 min : 36 min (1 point) a. 8 : 9 b. 8 : 36 c. 32 : 9 d. 128 : 144 HELP ASAP!!Simplify the expression.the expression negative one fifth j plus three fourths minus the expression five halves j plus seven eighths marketing dashboard is used to do which of the following?A. Promote a product to a target group.B. Analyze the new product lines being developed.C. Determine the financial cost of developing a product.D. Develop a course of action to market a product.E. Monitor strategic marketing performance.E