Write a program that calculites and displays the areat of a triangle based on the user input values of the base and the height of a triangle.
Area =1/2 (base) ×( height )
Make sure your program asks the user his/her full name and then greet the user. After that, tell the user what the program is all about. The program will then ask the user to enter the base and the height of a tringle. The program will calculate and print the area of the triangle. Make sure to test your program with different input values. Below is an example of a running program: Welcome to my program. Please enter your full name: Jane Doe Hello, Jane Doe This program will ask you to enter the base and the height of a triangle. The program will calculate and print the area of the triangle. Enter base of triangle:
7.5
Enter height of triangle:
10.2
The area is:
38.25
Thank you and have a nice day. Good bye!

True. In an indoor switchgear cabinet application, upgrading from an IEEE Class 2 termination to an IEEE Class 1 termination is acceptable.

Why upgrade should be done by qualified personnel?

Upgrading from an IEEE Class 2 termination to an IEEE Class 1 is acceptable in an indoor switchgear cabinet application as long as the new termination meets the required specifications and is installed correctly

However, it is important to note that the upgrade should be done by qualified personnel who are familiar with the local codes and standards, as well as the specific equipment involved.

Additionally, the safety of the system and personnel should always be a top priority during any upgrades or modifications to electrical equipment/devices.

To learn more about electrical equipment/devices, visit: https://brainly.com/question/24786034

#SPJ4

Templates are tosca elements that need to be added to requirements as per best practices.

Why do Templates need to be added?

Before you can run your tests, you must perform tasks manually that Template Selection enables you to automate. You can carry out the following actions in Step 3:

• The Test Case templates you want to employ for your tests should be chosen.

• Make a list of the test cases that will be executed or an execution list.

• Make a set of functional or non-functional criteria called a requirement set to evaluate the business risk of a test project.

What are Templates?

A file used as a model for a new document is known as a template. Templates have pre-filled placeholder fields and expertly crafted styles and layouts. When creating a new file, many word processors, presentations, desktop publishing products, and even website providers include template galleries that you can peruse.

To know more about templates, Check out:

https://brainly.com/question/13042079

#SPJ1

a. The filter length is thus equal to 48. The type of filter is a linear phase bandpass filter.
b. h(n) = 0.54 - 0.46*cos(2πn/48)

What is python

Python is a general-purpose programming language that was created in the late 1980s by Guido van Rossum. It is an interpreted, object-oriented, high-level programming language with dynamic semantics. Python is used for developing desktop GUI applications, websites and web applications. It offers strong support for integration with other languages and tools, comes with an extensive standard library, and can be used across all major operating systems. Python has a design philosophy that emphasizes code readability and a syntax that allows programmers to express concepts in fewer lines of code than would be possible in languages such as C++ or Java. Python supports multiple programming paradigms, including object-oriented, imperative and functional programming styles.

To know more about python
https://brainly.com/question/18502436
#SPJ4

According to the question of array declarations, the correct statement are:

e. double gpa[50];

f. const double LENGTH = 26;

double list[LENGTH];

What is array declarations?

An array declaration is a statement that creates an array in a programming language. It sets aside memory for the array and specifies the type of data that the array will contain. The syntax for an array declaration is typically language-specific, but generally includes the name of the array, the size of the array, and the type of data it will contain. The size can be fixed or dynamic, depending on the language. A fixed size array is declared with a specific size and cannot be changed, while a dynamic array can be resized at runtime. Array declarations are generally used to store data, such as a list of student names, a shopping cart of items, or a list of points on a graph.

To learn more about array declarations
https://brainly.com/question/30099412

#SPJ4

Thus, in order to replicate the airflow pattern around the airfoil of the real airplane, the 1/40th scale model would need to fly at a speed of 6400000 m/s.

We can apply the dynamic similarity principle to determine the speed at which a 1/40th scale model of the plane would need to fly in order to replicate the airflow pattern around the airfoil. According to the principle of dynamic similarity, the flow patterns of two systems that have the same Reynolds number will be comparable.

The ratio of inertial to viscous forces is known as the Reynolds number, and it can be calculated by:

Re = ρuL/μ

where is the fluid's viscosity, L is a characteristic length (in this case, the length of the airfoil), and is the fluid's density (in this case, air).

The actual airplane has these features:

Re1 = ρ1u1L1/μ1

The model is 1/40th scale.

Re2 = (ρ1/40^3)u2(L1/40)μ1

for u2: (ρ1/40^3)u2(L1/40)μ1 = ρ1u1L1/μ1

u2 = 40^3 * u1 = 640000 * 100 m/s = 6400000 m/s

Learn more about scale model Visit: brainly.com/question/26523564

#SPJ4

To design a two-stage RC band-pass filter to reduce the noise at 120 Hz and 1 MHz by 90%, the ratio of the output to input signal at the center frequency would be 0.316.

This is determined by calculating the voltage gain at the center frequency (f0) of the filter, which is equal to 1/3.16 (or 0.316). This corresponds to a -20 dB attenuation at the center frequency, which is the desired effect of a band-pass filter.

The voltage gain at the center frequency of a bandpass filter is determined by the ratio of the output resistance to the input resistance. Generally, the higher the output resistance, the higher the voltage gain.

Learn more about RC bandpass filter:

https://brainly.com/question/29490209

#SPJ4

Dr. Lori Baker, who is the operations manager at Nesa Electronics, has received information indicating that the company needs to produce 96 instruments within a 24-hour period. The various assembly line tasks that must be accomplished include:

Assembly-line activities are activities that involve breaking the production of a product into steps that are completed in a pre-defined sequence. This allows for a more efficient production process and allows for the production of a consistent product in a shorter period of time.

Learn more about Nesa Electronics:

https://brainly.com/question/28630529

#SPJ4

To determine normal strain ex' for x' a.xis.

Normal strain is the ratio of the length of the element before and after deformation. It is necessary to determine the distances between points before and after deformation.  

We calculate the distance between points C and A.

CA = 800*cos45° = 565.68542 mm

We calculate the distance between points C and A'.

CA' = 800*cos45° +5 = 570.68542 mm

Starting with x =0 at the left wall. Assume we measure the displacement at x=85 mm to be 0.71 mm and the displacement at x=215 mm to be 1.02 mm.

Therefore,Normal strain is the ratio of the length of the element before and after deformation. It is necessary to determine the distances between points before and after deformation.  

Learn more about displacement on:

https://brainly.com/question/30087445

#SPJ1

The statement is false. Between the inner and outer layers of the cable, a protective barrier made of polyvinyl chloride (PVC) is employed as bedding.

Conductors for armored cable put in thermal insulation must be 90°C (194°F) rated. Cable used in these applications must not have an ampacity greater than that of a conductor with a 60°C (140°F) rating. trays for cables. in arid regions. Unless in damp or wet areas, embedded in plaster finish on brick or other masonry. When masonry block or tile walls are not exposed to or subject to an excessive amount of moisture or dampness, they should be run or fished in the air voids of those walls.

Learn more about conductor here-

https://brainly.com/question/29848783

#SPJ4

Answer:

Autonomous devices are technological systems that are capable of operating independently and making decisions without human input. They are equipped with algorithms, sensors, and other technologies that enable them to gather and analyze information to carry out tasks. Examples of autonomous devices include self-driving cars, drones, robots, and smart home appliances, etc.

Explanation:

Answer:

Explanation: Autonomous devices are a physical form of autonomous technology. Robots, both functional and humanoids, drones and vehicles are a few examples of autonomous devices. Autonomous devices learn from their surroundings and complete tasks without continued human input.

hope that helped!!

C. M.2. M.2 is a type of storage connection for solid state and hard drives that allows them to be connected directly to the motherboard without the need for cables.

A motherboard is the main printed circuit board in a computer system. It is sometimes referred to as the system board and serves as the main hub for communication between the different components of the system. The motherboard provides slots for inserting other components such as the central processing unit (CPU), memory modules, and expansion cards. In addition, the motherboard contains connectors for connecting peripheral devices such as the monitor, mouse, keyboard, and other external devices. The motherboard also includes the various ports, such as USB and Ethernet, that allow for communication with other devices. The motherboard is essential for a computer as it is responsible for controlling the system and making sure that all the components are working together.

Thunderbolt and eSATA are both types of external storage connections, while SCSI is an older type of internal storage connection.

To learn more about motherboard

https://brainly.com/question/28494136

#SPJ4

Charts and graphs known as pictograms employ icons and images to represent data.

Pictograms, often referred to as "pictographs," "icon charts," "image charts," and "pictorial unit charts," make use of a collection of recurrent icons to represent straightforward facts.

Each icon represents a specific number of units and is organized in a single line or grid (usually 1, 10, or 100).

They are a characteristic of many excellent infographics and are frequently utilized to make otherwise dull facts or data points interesting.

Therefore, Charts and graphs known as pictograms employ icons and images to represent data.

To learn more about data, refer to the link:

https://brainly.com/question/10980404?

#SPJ6

So, Here frontal view of the Taj Mahal which is shown in the question exhibits bilateral symmetry and balance.

What is Balance Symmetry?

Bilateral symmetry refers to a design that is symmetrical along a central axis, creating two mirror-image halves.

The Taj Mahal is an excellent example of bilateral symmetry, as its main facade, minarets, and central dome are all symmetrical and balanced on either side of a central axis.

Balance is another design element that contributes to the beauty of the Taj Mahal.

The building's massive size and grand symmetrical are balanced by its intricate details and the use of symmetry.

The balance between the various design elements, such as the dome, minarets, arches, and intricate carvings, creates a harmonious and aesthetically pleasing composition.

To know more about architecture, visit: https://brainly.com/question/30000835

#SPJ4

Answer:

hi :)

Explanation:

A research project on current memory technologies should include the following: an abstract, an introduction, background information, a discussion of the topic, and a conclusion. The abstract should provide a summary of the chosen problem, and the introduction should include brief information about the topic, demonstrated with text and diagrams. The background should include any terms or theories the reader should know about. The discussion should be thorough and the conclusion should summarize the findings.

If a capacitor with a reactance of 30 N is connected in parallel with the motor of Problem 13, the active power reading of the wattmeter will be 0, since the capacitor has no resistance and therefore does not dissipate any active power.

The total reactive power absorbed by the capacitor and motor can be calculated using the formula [tex]P=XC I^2 ,[/tex] where XC is the capacitive reactance and I is the current flowing through the circuit. The total reactive power absorbed is therefore [tex]30 N x I^2[/tex].

The apparent power of the AC line can be calculated using the formula S= V I cos θ, where V is the voltage, I is the current, and θ is the power factor.

The line current can be calculated using Ohm's Law, I=V/R, where V is the voltage and R is the total resistance of the circuit.

Learn more about current of a capacitor:

https://brainly.com/question/18722669

#SPJ4

Check balls used in the valve body of a vehicle are constructed of imidized plastic.

A check ball is used in one of those valve configurations to permit or prevent fluid passage. A check ball in a pocket that is submerged in the fluid can block and unblock an orifice that fluid is passing through or attempting to pass through as a result of fluid pressure.

Because they conform to the ball seats on the separator plate, the Sonnax imidized plastic balls seal better than steel balls.

Therefore, plastic imidized check balls are utilized in the valve body of a vehicle.

To learn more about check balls, refer to the link:

https://brainly.com/question/24745369

#SPJ1

Before we go into the specifics of the brake job, you should be aware that wheel cylinders are always replaced in pairs, even if one is trouble-free.

A part of a hydraulic drum braking system is a wheel cylinder. It is a part of every wheel and is often found above the shoes at the top of the wheel.

Its purpose is to apply pressure to the shoes in order to bring them into contact with the drum and cause friction to stop the vehicle.

The Wheel Cylinder applies pressure to the brake shoes in a drum brake system, and the brake shoes' contact with the drum causes the vehicle to slow down and come to a stop.

Thus, this can be the procedure to change the wheel cylinder seal.

For more details regarding wheel cylinder, visit:

https://brainly.com/question/28988563

#SPJ9

The design life of reliability of 0. 95 is desired at 4.69 years.

a. The cumulative hazard function, H(t), is given by the integral of the hazard rate over time:

H(t) = ∫(0.4t)dt = 0.2t^2

The reliability function, R(t), is defined as the probability of a component not failing within time t and is given by:

R(t) = e^(-H(t)) = e^(-0.2t^2)

The probability of a component failing within the first month (t = 1/12) can be calculated as:

1 - R(1/12) = 1 - e^(-0.2(1/12)^2) ≈ 0.067

b. To find the design life, we need to find the time t such that R(t) = 0.95.

Taking the natural logarithm of both sides, we have:

ln(R(t)) = ln(0.95)

-H(t) = ln(0.95)

0.2t^2 = ln(0.95)

t^2 = ln(0.95) / 0.2

t = sqrt(ln(0.95) / 0.2) ≈ 4.69

So the design life for a reliability of 0.95 is approximately 4.69 years.

Learn more about linear hazard here:

https://brainly.com/question/29693364

#SPJ4

The distribute Current Player Tokens method for the tokens are collected and removed from the game board at the current player's position is stated in code in Java below:

The Java application's main method is created by using the keyword public static void main. The program's primary method, it is what all others are called. For difficult command-line processing, it accepts parameters but cannot return values. Both generate a void method (a method with no return value), but only the public void method is accessible to classes outside the one that created it. Only the class in which the private method is contained may utilise it. It is a keyword that is employed to indicate that a method returns nothing. The main() method's return type is void because it doesn't produce a result. The code is:

public void distributeCurrentPlayerTokens()

{

int numTokens = board[currentPlayer];

board[currentPlayer] = 0;

int i = currentPlayer;

while (numTokens > 0)

{

i = (i+1) % board.length; 1

board[i]++;

numTokens--;

}

}

To learn more about public void, visit:

https://brainly.com/question/12978300

#SPJ4

False. It is not recommended to reduce tire pressure below the manufacturer's recommendation, but it is also not recommended to maintain tire pressure at the recommended level in extreme heat conditions.

This is because extreme heat can cause a significant increase in tire pressure, leading to a dangerous condition known as tire overheating.

Tire overheating can occur when tires are driven at high speeds for extended periods of time, or when driving in hot weather conditions. Overheated tires can cause the tire's internal temperature to increase, leading to a reduction in tire life and an increased risk of tire failure.

To avoid tire overheating, it is important to regularly check the tire pressure and adjust it as needed. If driving in extreme heat conditions, it may be necessary to reduce tire pressure slightly to help regulate the internal temperature of the tire. This will help to minimize the risk of tire overheating and the associated dangers.

It is also important to note that tire pressure should be checked when the tires are cold, as tire pressure will increase as the tire heats up. This means that tire pressure should be checked before driving, and not immediately after driving in extreme heat conditions.

In conclusion, while it is not recommended to reduce tire pressure below the manufacturer's recommendation, it may be necessary to reduce tire pressure slightly in extreme heat conditions to help regulate the internal temperature of the tire and minimize the risk of tire overheating and tire failure.

To know more about pressure: https://brainly.com/question/12971272

#SPJ4

The area will be maximum of the above two case of the structural member in a nuclear reactor, in which the area is 0.5142 in²

Axial loads, also known as thrust loading, are those that can sustain a force that is directed in the same direction as the axis. On the other hand, radial loads are designed to withstand forces that are parallel to the axis. Axial loads are applied along a structural member's longitudinal or centroidal axis. The member is considered to be under tension and the applied load is tensile if the result of the load is for the member to grow longer.

Given:

Axial load = 4 kip

Factor of safety(FOS) = 3

Length L = 3 ft = 36i

[tex]E_{zx}[/tex] = 14 × 10³ Ksi

[tex]r_{y}[/tex] = 57.5 Ksi

Crossection Area = A

Case 1

FOS = [tex]r_{y}/r_{APPLY}[/tex]

[tex]r_{APP}[/tex] = [tex]r_{y} / FOS[/tex]  = 57.5/3

= P/area = 19.167 Ksi

Area = 4/19167 = 0.20869 in²

Case 2

Elongation = PL/ AE

0.02 = (4×36) / (A × 14 × 10³)

A = 0.51428 in²

To learn more about axial loads, visit:

https://brainly.com/question/30030702

#SPJ4

The complete question is

A structural member in a nuclear reactor is made of a zirconium alloy. if an axial load of 4 kip is to be supported by the member, determine its required cross-sectional area. use a factor of safety of 3 relative to yielding. what is the load on the member if it is 3 ft long and its elongation is 0.02 in.?  [tex]E_{zr}[/tex] = 14(10³) ksi, [tex]sigma _{y}[/tex] = 57.5 ksi. The material has elastic behaviour.

Answer:

$9,935

Explanation:

Maria needs to come up with the total amount of cash she needs to buy the car, which is the difference between the total cost of the car and the loan amount plus the license fee and taxes.

Total cost of the car: $21,000

Loan amount: $9,500

License fee: $315

Taxes: $1,150

Therefore, Maria needs:

$21,000 - ($9,500 + $315 + $1,150) = $21,000 - $11,065 = $9,935

So, Maria will need $9,935 in cash to buy the car.

Answer: $7400

Explanation: Subtract 2100 out of 9500 which equals 7400.

FMEA , might be useful when investigating situations involving large, complex, and interrelated machinery and procedures

Maintenance is the act of keeping something in good working condition. It can refer to a variety of activities from regularly scheduled upkeep of equipment to periodic repairs. Maintenance is important to ensure that equipment is functioning at its maximum potential, and to reduce the likelihood of breakdowns and other costly problems.

Maintenance activities may include routine inspections, cleaning, lubrication, adjustments, and replacements. Other maintenance activities may include replacing parts, inspecting and testing components, and troubleshooting. Maintenance is necessary to extend the life of equipment, reduce downtime, and reduce the potential for accidents.

To know more maintenance
https://brainly.com/question/29764547
#SPJ4

Creep in a plastic product can occur due to both mechanical and environmental loading. Mechanical loading can include high mechanical stress resulting from bending, compressing, stretching, or twisting.

What is Mechanical?

Mechanical engineering is the branch of engineering that deals with the design, analysis, manufacturing, and maintenance of mechanical systems. It combines elements of physics, materials science, and engineering to create machines and devices that can perform a variety of tasks.

Mechanical engineers use their knowledge of mathematics, physics, and materials science to develop processes and machines that are efficient, reliable, and safe. Mechanical engineers design and build a wide range of products and systems, from aircraft engines to medical devices, from robots to power plants.

To know more about Mechanical

https://brainly.com/question/20434227

#SPJ4

Edgar separate the salt out of the salt-water mixture by evaporating the water. Thus, option B is correct.

A kind of vaporization called evaporation takes place on the surface of a liquid as it transitions into the gas phase. When humidity impacts the rate of evaporation of water, for example, a high concentration of the evaporating material in the surrounding gas considerably slows down evaporation.

The salt will remain as a solid after the water has been boiled or evaporated. Distillation is a method you may employ to obtain the water.

This works because salt has a boiling point that is substantially higher than that of water. Boiling the salt water in a saucepan with a cover is one method for separating salt and water at home. Therefore, option B is correct.

Learn more about Evaporation here:

https://brainly.com/question/5019199

#SPJ1

when a car is registered in another state do California license plates need to be returned to the dmv is true .

What is  license
A license is a legal document that grants permission to an individual or organization to utilize intellectual property, such as software, trademarks, patents, or copyrighted works. Licenses also often include restrictions and conditions that must be adhered to in order to maintain the license. These restrictions can include things like how the property is used, how much it can be used, and how it can be distributed. A license is an important way to protect one's intellectual property and ensure that any revenue generated is properly compensated.

To know more about license
https://brainly.com/question/19477385
#SPJ4

To produce a signal with rising amounts of harmonic signal and decreasing levels of noise to a cutoff frequency of 400 Hz, low-pass filtering raises the ratio of harmonic signal to noise.

Low pass filter: The image is smoothed using this particular style of frequency domain filter. The low frequency components are preserved while the high frequency components are attenuated. High pass filter: A high pass frequency domain filter is used to enhance the sharpness of the image. A voltage-to-current converter, or resistor, is used in an RC circuit to "convert" the input voltage into the output current. In reality, the resistor just uses Ohm's law to calculate the current.

Learn more about voltage here-

https://brainly.com/question/29445057

#SPJ4

The one-dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and heat generation in its simplest form is:
∂T/∂t = α (∂2T/∂x2) + q(x, t)
where T is the temperature of the wall, α is the thermal diffusivity, q(x, t) is the heat generation in the wall, and x is the position along the wall.

What is Thermal Coductivity?
Thermal conductivity is a material property that describes how well a material conducts heat. It is measured in watts per meter-Kelvin (W/mK) and is a function of the material's composition, microstructure, and temperature. Metals are generally good thermal conductors, with copper being the best conductor. Other materials such as glass, wood, and plastics have much lower thermal conductivities.

To know more about Thermal Conductivity
https://brainly.com/question/27925106
#SPJ4

The correct answer is Discover the inverse Laplace transform of each of the following frequency functions using MATLAB and the Symbolic Math Toolbox: [Part: 2. 2] a. G (s) = (s^2 + 3s + .

Engineers and scientists can use the programming environment MATLAB® to analyse, create, and test systems and technologies that will change the world. The MATLAB language, a matrix-based language that enables the most natural expression of computer mathematics, is the core of MATLAB. Millions of engineers and scientists use MATLAB as a programming and numeric computing platform to analyse data, develop algorithms, and build models. MATLAB Online's basic edition offers 20 hours of free usage each month along with access to 10 widely used toolboxes. This can be helpful if you don't have a full licence and only need to perform simple tasks or run shared Simulink models and MATLAB scripts.

To learn more about MATLAB click on the link below:

brainly.com/question/29742304

#SPJ4

Overall, the Three Gorges Dam was considered an ambitious and strategic project for China's future, and it was a high priority for the government.

Why China was very interested in constructing the Three Gorges Dam?

China was very interested in constructing the Three Gorges Dam for several reasons:

To learn more about hydroelectric power plant, visit: https://brainly.com/question/18762698

#SPJ4