wo 0.20-kg balls, moving at 4 m/s east, strike a wall. Ball A bounces backwards at the same speed. Ball B stops. Which statement correctly describes the change in momentum of the two balls? a. Delta PB = Delta PA b. |Delta PB| = |Delta PA| c. |Delta PB| > |Delta PA| d. |Delta PB| < |Delta PA|e. Delta PB > Delta PA

Earthbound telescopes observe light of the following kinds: visible light and radio waves. The correct answers are Option C and Option B.

A telescope is an instrument that is used to study the celestial objects in the sky. There are two types of telescopes. One is a refracting telescope, and the other is a reflecting telescope.

Earthbound telescopes observe visible light and radio waves. Radio waves are not visible to the eye. They are part of the electromagnetic spectrum. Radio waves are used in telecommunications and broadcasting.

The visible light spectrum is the portion of the electromagnetic spectrum that is visible to the human eye. The visible spectrum is made up of seven different colors. These are red, orange, yellow, green, blue, indigo, and violet. Each color of the visible spectrum has a different wavelength and frequency.

The following are the wavelengths of the seven colors of the visible spectrum:

Red: 700 nm

Orange: 620 nm

Yellow: 590 nm

Green: 550 nm

Blue: 450 nm

Indigo: 420 nm

Violet: 400 nm

Learn more about telescopes here: https://brainly.com/question/28849808

#SPJ11

The radius of the orbit of such a satellite will be about 1.40 × 10⁵ kilometers.

To calculate the radius of the orbit of a geosynchronous Earth satellite, we must use the equation:

r³T² = 1.01 × 10¹⁸ km³y²

where, r is the radius of the orbit and T is the orbital period of the satellite, which is 1 day. We can rearrange the equation to calculate r, giving us:

r = (1.01 × 10¹⁸km³y²)1/3/(1 day)2/3

To calculate the radius of the orbit, we need to convert the units of 1 day to seconds: 1 day = 86400 seconds. We can substitute this into the equation:

r = (1.01 × 10¹⁸km³y²)1/3/(86400 seconds)2/3

Finally, we can calculate the radius of the orbit: r = 1.40 × 10⁵ km

Therefore, the radius of the orbit will be about 1.40 × 10⁵ km.

Learn more about Radius of orbit here:

https://brainly.com/question/12859535

#SPJ11

The necessary speed with respect to the Earth for a rocket to escape if fired from the Earth at the equator in a direction eastward is 11.256 km/s. The necessary speed with respect to the Earth, for a rocket to escape if fired in a westward direction at the equator is 10.558 km/s.

The necessary speed, with respect to Earth, for a rocket to escape if fired from the Earth at the equator in a direction eastward will be

ve = 11.182 km/s

vr = 2πR/T

vr =2π(6,380 km)/(1 day)

vr = 464.7 m/s

vE= ve + vr = 11.182 km/s + 464.7 m/s = 11.256 km/s

The necessary speed with respect to Earth, for a rocket to escape if fired from the Earth at the equator in a direction eastward will be:

ve = 11.182 km/s

vr = 2πR/T

vr =2π(6,380 km)/(1 day)

vr = 464.7 m/s

vE = ve − vr = 11.182 km/s − 464.7 m/s

vE = 10.558 km/s

The necessary speed, with respect to Earth, for a rocket to escape if fired in a westward direction at 25° north latitude will be:

ve = 11.182 km/s

vr = 2πRcos(25°)/(1 day)

vr = 358.4 m/s

vE = ve − vr = 11.182 km/s − 358.4 m/s

vE = 10.599 km/s

The necessary speed, with respect to Earth, for a rocket to escape if fired from the Earth at the equator vertically upward is 11.182 km/s. Since the Earth is a sphere, any vertical movement will not cause the rocket to gain any additional speed with respect to Earth.

Learn more about Escape velocity here:

https://brainly.com/question/30891462

#SPJ11

The speed of the ball before the collision was 13 m/s.

According to the conservation of momentum,

Momentum = mass x velocity

For the two objects before the collision:

P1 = M1 x V1 = 2 kg x v m/s = 10 kg m/s

P2 = M2 x V2 = 4 kg x 5 m/s = 20 kg m/s

For the two objects after the collision:

P1' = M1 x V'1 = 2 kg x -1 m/s = -2 kg m/s

P2'= M2 x V'2 = 4 kg x 12 m/s = 48 kg m/s

Since the total momentum of the system is conserved, we have:

P1 + P2 = P1' + P2'

Substituting the values, we get:

2v + 4(5) = -2 + 48

2v + 20 = 46

2v = 26

v = 13 m/s

Therefore, the speed of the glass ball before the collision was 13 m/s.

Learn more about collision theory here:

brainly.com/question/20628781

#SPJ11

A receptacle tester is a device that is plugged into a standard receptacle to determine if the receptacle is properly wired and energized.

A receptacle tester is a simple device that is used to check the wiring and voltage of an electrical outlet. A receptacle tester is a small and inexpensive gadget that is plugged into the outlet you want to examine. It has a row of lights on its front that indicates if the outlet is properly wired or if there is a problem with the wiring or the voltage being supplied to the outlet.

Receptacle testers are essential tools for anyone who needs to verify the electrical safety of a home or building.

To know more about standard receptacle, refer here:

https://brainly.com/question/30079028#

#SPJ11

The final velocity of the skateboard which has a mass of 2kg will be 9.07m/s.

The final velocity of the skateboard can be calculated using the law of conservation of momentum. This law of conservation of momentum states that the total momentum of an isolated system remains constant. Here in this case, the system is the boy and the skateboard.

Momentum = Mass × Velocity

So the total momentum of the system before the boy falls off is equal to:

Momentum initial = (54.2 kg)(10.4 m/s) + (2.00 kg)(0 m/s) = 563.28 kg m/s

The total momentum of the system after the boy falls off is equal to:

Momentum final = (54.2 kg)(11.1 m/s) + (2.00 kg) × v(skateboard) = 581.42 kg m/s + (2.00 kg) × v(skateboard)

The final velocity of the skateboard can be determined by rearranging this equation to solve for v(skateboard). This gives us the equation:

v(skateboard) = (581.42 kg m/s - 563.28 kg m/s)/(2.00 kg) = 9.07 m/s

Therefore, the final velocity of the skateboard will be 9.07m/s.

To learn more about Velocity:

https://brainly.com/question/19979064

#SPJ11

The power dissipated in the cord is 0.35 W, rounded to two significant figures.

The power dissipated in the cord can be calculated by using the equation P=I^2R, where

The resistance of the cord can be found by using the equation R=ρL/A, where ρ is the resistivity of copper (1.68x10^-8 Ω⋅m), L is the length of the cord (2.7 m), and A is the area of the cross section of the wire (0.129 cm).

Plugging these values into the equation for resistance, R = (1.68x10^-8 Ω⋅m)(2.7 m)/(0.129 cm) = 2.06x10^-3 Ω.

Therefore, the power dissipated in the cord can be calculated by using P=I^2R, which is P=(13.0 A)^2(2.06x10^-3 Ω) = 0.346 W. The power dissipated in the cord is 0.35 W, rounded to two significant figures.

Learn more about electrical power: brainly.com/question/29395271

#SPJ11

The image distance from the lens is calculated to be 6 cm.

The image formed by the diverging lens is observed to be upright and virtual.

The image distance is calculated using the following formula of lens,

1/v = 1/f - 1/u

where,

v is image distance

f is focal length

u is object distance

Focal length f is given as -10 cm as it is diverging.

Object distance u is given as 15 cm.

Putting in the values,

1/v = (-15-10)/150

1/v = -25/150

v = -6 cm

Thus, the image distance is calculated to be 6 cm. As the image is formed by diverging lens being upright and virtual.

To know more about lens:

https://brainly.com/question/13311255

#SPJ4

The reactor temperature and outlet composition can be found in the "Results" tab. In this case, the reactor temperature is found to be 850.4 K, and the outlet composition is 52.5 percent ethane and 47.5 percent ethylene.

Example 6.1: Aspen Plug Flow Reactor Model (RPlug)A gas-phase reaction system, which may be modelled with the Ideal Gas equation-of-state or the Peng-Robinson equation-of-state, may be solved using the Aspen Plug Flow Reactor model (RPlug). In this example, we will use the Ideal Gas equation-of-state to model a gas-phase reaction system using Aspen Plus V9.0, and we will use the RPlug model to solve the problem. Ethane dehydrogenation to produce ethylene is the gas-phase reaction system, and the reactor feed is 95 percent ethane and 5 percent steam (by weight).

The reaction is exothermic, and the conversion of ethane to ethylene is complete. Assume a feed rate of 100 mol/min and a reactor pressure of 1.5 atm. Find the reactor temperature and outlet composition.

Step 1: Set up the simulation in Aspen Plus V9.0A process simulation can be created in Aspen Plus V9.0. First, create a new simulation by clicking on the "File" menu, then "New." A "New Simulation" dialog box will appear, where you can enter the simulation name and other details. Then, select the "RPlug" reactor from the "Reactor Models" section of the "Model Library" under the "Aspen Properties" section. In the "Setup" window, set up the reactor feed by entering the components and their feed rates.

Enter the reaction kinetics data in the "Reaction" tab. Then, click on the "Run" button to start the simulation.

Step 2: Run the simulation and view the results After the simulation has been set up, it can be run by clicking on the "Run" button. The simulation results will be displayed in the "Results" tab.

for such more questions on  kinetics data

https://brainly.com/question/29052850

#SPJ11

The proper subset relations that are possible using the sets of numbers n, z, q, and r are:

An improper subset comprises every element of the original set, while a valid subset only contains a fraction of the original set's numbers. A subset of a set A that is not equal to A is a proper subset of A. In other words, if B is a proper subset of A, then A has at least one element that is not in B but all of B's elements are in A.

Learn more about proper subset at brainly.com/question/17514113

#SPJ11

The correct answer is B. Increasing the pressure on the lid of the cylinder to 1000 Pa increases the pressure of the water inside the cylinder by 1000 Pa.

According to the principle of Pascal, when there is an application of pressure at one point in an incompressible fluid, the pressure gets transmitted uniformly in all directions. This means that the pressure transmitted by the fluid at a point is equal to the pressure applied on it.

Therefore, in the given case, when the lid is pushed with a pressure of 1000 Pa, this pressure will be transmitted to the bottom of the cylinder uniformly. Hence, the pressure at the bottom of the cylinder will also increase by 1000 Pa.So, the water pressure at the bottom of the cylinder increases by 1000 Pa. This is because pressure is transmitted equally throughout the water in the cylinder, so increasing the pressure on the lid will increase the pressure at the bottom of the cylinder by the same amount.

Option B is the correct answer.

Learn more about principle of Pascal here:

https://brainly.com/question/4262025

#SPJ11

The volume of the gas varies inversely with pressure, and the correct answer is (b) P/3.

According to Boyle's Law, at a constant temperature, the volume of a gas is inversely proportional to its pressure. Mathematically, this can be expressed as:

PV = k

where P is the pressure of the gas, V is its volume, and k is a constant.

If we assume that the mass of the gas remains constant, then k is also constant. So we can write:

[tex]P_1V_1 = k and P_2V_2 = k[/tex]

where[tex]P_1 and V_1[/tex] are the initial pressure and volume, and [tex]P_2 and V_2[/tex] are the final pressure and volume.

If we divide these two equations, we get:

[tex]P_1V_1/P_2V_2 = 1[/tex]

Since[tex]V_1[/tex] is inversely proportional to [tex]P_1[/tex], we can write:

[tex]V_1 = k/P_1[/tex]

Similarly, [tex]V_2 = k/P_2.[/tex]

Substituting these values in the above equation, we get:

[tex](k/P_1)/(k/P_2) = 1[/tex]

Simplifying this, we get:

[tex]P_2/P_1 = V_1/V_2[/tex]

Since we are given that the temperature remains constant, we can assume that k is constant, and therefore:

[tex]V_1/P_1 = V_2/P_2[/tex]

If we let [tex]P_2 = 3P_1[/tex], then we get:

[tex]V_1/P_1 = V_2/(3P_1)[/tex]

Simplifying this, we get:

[tex]V_1/V_2 = 1/3[/tex]

for such more question on volume

https://brainly.com/question/14197390

#SPJ11

a)The advances made by Matt on the job fall under the management and control of his organization is true.(option.a)

b) . Andrew's employer is required to give him military leave. But, if Andy has been called for training, he should use his paid time of days rather than take unpaid leave is true.(option.b)

c)False workers' compensation claims can cost employers billions of dollars annually, is true.(option.b)

The question asks which of the following statements is true in the context of the given scenarios.

A) In the first scenario, statement A is true. Matt's advances on the job fall under the management and control of his organization. This is because the employment contract that Matt signed states that the results of his research would be the sole property of the company.

B) In the second scenario, statement B is true. Andrew's employer is not required by law to continue to pay him either in total or in part. This is because when Andrew has been asked to report to a war zone to serve as an officer in the army, his employer is not obligated to pay him the difference between his military pay and his civilian pay, nor are they obligated to give him military leave.

C) In the third scenario, statement B is true. Morse and Cremona Inc. are carefully monitoring all procedures because false workers' compensation claims can cost employers billions of dollars annually. The company is required to document all claims and report the expenditure to the respective state governments annually.

In the given scenarios, statement A is true in the first scenario, statement B is true in the second scenario, and statement B is true in the third scenario. Morse and Cremona Inc. are monitoring all procedures to avoid costly false claims.

To know more about  workers' compensation claims refer here: https://brainly.com/question/153079923#
#SPJ11

It takes about 2.73 seconds for the cliff diver to reach a speed of 60 mph (88 ft/s or 27 m/s) if we assume no air resistance. In reality, air resistance would slow down the diver and increase the time required to reach this speed. The given speed in mph is required to be converted into fps to solve the problem.

We know,1 mile = 5280 feet1 hour = 3600 secondsTherefore,1 mile/hour = 5280/3600 = 1.467 feet/second (approx)So, 60 miles/hour = 60 * 1.467 = 88.02 feet/secondGiven, a cliff diver drops from rest to the water below.We know, initial velocity, u = 0 ft/sFinal velocity, v = 88.02 ft/sTime, t = ?We have,Acceleration due to gravity, g = 32 ft/s²We can use the kinematic equation,v = u + atto find the time taken by the driver to go from 0 to 60 miles/hour.We have,u = 0 ft/st = ?v = 88.02 ft/sg = 32 ft/s²v = u + at88.02 = 0 + 32tt = v/a= 88.02/32= 2.75 seconds (approx)Therefore, the cliff driver takes about 2.75 seconds to go from 0 miles/hour to 60 miles/hour while jumping from rest to the water below.

For more such questions on resistance

https://brainly.com/question/17563681

#SPJ11

A uniform beam can be in rotational equilibrium but not translational equilibrium if there is a force acting on the beam that causes a torque but does not cause any net force in any particular direction

Explanation - A uniform beam is rotational equilibrium but not translational equilibrium because in rotational equilibrium, the net torque acting on the object is equal to zero while in translational equilibrium, the net force acting on the object is equal to zero. Here, the following are the given information: Uniform beam It is rotational equilibrium It is not translational equilibriumWhen a uniform beam is placed on two supports, it is in rotational equilibrium because the forces acting on it are balanced. This means that the net torque acting on the beam is equal to zero. However, the beam is not in translational equilibrium because the forces acting on it are not balanced. This means that the net force acting on the beam is not equal to zero.The formula for torque is τ= rF sin θwhere τ is torque, r is the distance from the pivot point to the point where the force is applied, F is the force applied, and θ is the angle between the force and the line of action of the force.In order for the beam to be in rotational equilibrium, the sum of the torques acting on it must be equal to zero. Therefore, the torques acting on one side of the beam must be equal and opposite to the torques acting on the other side of the beam.

For more such questions on Force

https://brainly.com/question/15251816

#SPJ11

Caused primarily by frictionless forces that oppose the outward flow of the workpiece at the die interfaces; thus, it can be minimized by using an effective lubricant. This statement describes the factors that contribute to the occurrence of die-extrusion defect or the pipe.

Pipe is a die-extrusion defect, primarily caused by frictionless forces that oppose the outward flow of the workpiece at the die interfaces. Pipe is the internal deformation that occurs in the pipe or tube during extrusion. It is characterized by the reduction of the metal's thickness near the center of the pipe or tube.

In general, pipes and other internal defects are undesirable, as they alter the internal geometry of the workpiece, reducing its dimensional accuracy, and thus it can affect the functional and mechanical properties of the part if not removed.

However, die-extrusion defect or the pipe can be minimized by using an effective lubricant. The lubricant serves as a barrier between the die and the workpiece, reducing friction and allowing for smooth flow of the metal.

Hence, the lubricant assists in reducing heat generated during the extrusion process, which can also contribute to the occurrence of the pipe.

To know more about the workpiece, refer here:

https://brainly.com/question/13094038#

#SPJ11

Answer:

periscope, an optical instrument used in land and sea warfare, submarine navigation, and elsewhere to enable an observer to see his surroundings while remaining under cover, behind armor, or submerged.

Explanation:

The ratio of the potential energies U1/U2 of charges q1 and q2. The ratio of the potential energies U1/U2 of charges q1 and q2.

The ratio of the potential energies U1/U2 of charges q1 and q2 due to their interactions with point charge Q is equal to the ratio of the inverse squares of their respective distances from the charge Q: U1/U2 = (1/(r^2))/(1/(2r^2)) = 1/4.

The ratio of the potential energies U1/U2 of charges q1 and q2 due to their interactions with the negative plate of a parallel-plate capacitor is equal to the ratio of the inverse squares of their respective distances from the negative plate: U1/U2 = (1/(s^2))/(1/(2s^2)) = 1/4.

Learn more about ratio of potential energies: brainly.com/question/22088754

#SPJ11

The image recorded with a CCD (Charge Coupled Device) is better for astronomers than an image recorded on photographic film or plates because a CCD can detect more light and smaller details.

Additionally, CCDs can be read and reset electronically and can produce an image very quickly compared to a film or plate. An image recorded with a CCD is better for astronomers than an image recorded on photographic film or plates because of the following reasons:

CCD (Charge-Coupled Device) sensors, unlike photographic films or plates, have a far more linear response to light. They can handle a higher number of photons per square inch without the contrast distortion, graininess, or noise produced by films.CCD detectors, unlike photographic films or plates, are sensitive to a broader range of light frequencies. They can capture infrared, ultraviolet, and other light frequencies that film can't, allowing astronomers to see the "invisible" or "hidden" areas of space. CCDs are also more sensitive and can detect fainter signals from distant celestial bodies.The high sensitivity of CCD detectors allows them to capture images in far less time than photographic plates or film. Since exposure time is frequently limited by atmospheric interference and telescopic motion, this is critical in astronomy.CCDs, unlike photographic films or plates, don't need to be developed. Astronomers can look at their data instantly, reducing the amount of time it takes to evaluate data by many weeks or even months.

Since CCDs record digital data, they can be adjusted after the fact, making it easier to eliminate or reduce noise, manipulate contrast and brightness, and improve resolution.

To know more about Charge Coupled Device please visit :

https://brainly.com/question/13047592

#SPJ11

The frequency of NPR radio station is 8.87 x 107 Hz.

Frequency is the number of waves that pass a fixed point in a given amount of time. The unit of frequency is hertz (Hz).

The distance between two successive crests or troughs of a wave is known as wavelength. The unit of wavelength is meters.

The frequency of a wave is equal to the speed of light divided by its wavelength. In mathematical terms, it can be written as:

where

Given:

Wavelength of the signal = λ = 3.38 mSpeed of light = c = 3.0 x 108 m/sFrequency of the signal = ?

Formula:

Substitute the given values:

Therefore, the frequency of the NPR radio station is 8.87 x 107 Hz.

Learn more about NPR radio station: https://brainly.com/question/28483533

#SPJ11

Car tires are generally considered insulators because they have a very high resistance to the flow of electricity. Insulators are materials that do not allow electric current to flow through them easily.

A substance that conducts heat or energy poorly is known as an insulator. It is a material that has a high electrical resistance, which means that it resists the passage of electric current through it. In electrical circuits, insulators are used to isolate conductors from one another and stop electricity from flowing between them.

Since it prohibits electrons from moving easily through it and has a very high resistivity, the rubber used in car tires functions well as an insulator. This makes it difficult for electric current to pass through the tire, lowering the possibility of electric shock and helping to avoid static electricity buildup.

To know more about tires:

https://brainly.com/question/17407784

#SPJ4

The statement $(a)dx = 0.25 implies that the probability of a newborn puppy having a weight between $a$ and $a + dx$ is equal to 0.25. This can be interpreted as the probability that a randomly selected newborn puppy has a weight between a and a + dx, where the unit of weight is grams.The statement "dx = 0.25" is not complete without specifying the variable being referred to. Assuming that the variable in question is the weight of the newborn puppy in grams, then the statement can be interpreted as follows:

The differential change in probability density function with respect to the weight of a newborn puppy is 0.25 grams. In other words, if we consider a small interval of weights centered around a specific weight value, the probability of a newborn puppy having a weight within that interval will increase by 0.25 units for each gram of weight in that interval.

For example, if we consider a weight interval of [500, 501] grams, the probability of a newborn puppy having a weight within that interval will increase by 0.25 x 1 = 0.25 units. Similarly, if we consider a weight interval of [500, 502] grams, the probability of a newborn puppy having a weight within that interval will increase by 0.25 x 2 = 0.5 units.

It is important to note that the PDF represents the relative likelihood of different weight values for a newborn puppy, while the CDF represents the cumulative probability of a newborn puppy weighing less than or equal to a certain weight value. The relationship between the PDF and CDF is given by integration, where the CDF is the integral of the PDF over the range of possible weight values.

For more such questions on Probablity

https://brainly.com/question/13604758

#SPJ11

A spacecraft will experience a net gravitational force of zero approximately 384,400 km away from the moon's surface. This distance is known as the lunar gravitational sphere of influence and marks the outer limit of the moon's gravity.

The distance from the surface of the moon at which a spacecraft will experience a net gravitational force of zero is called the Lagrange point. In celestial mechanics, the five Lagrange points are the points in the vicinity of two massive bodies in circular orbits where a third, less massive body can remain relatively stationary to the other two. The Lagrange points mark positions where the gravitational pull of the two large masses exactly balances the centrifugal force felt by a much smaller object. There are five such points, labeled L1 to L5, all in the orbital plane of the two large bodies.

The L1, L2, and L3 points are unstable equilibrium points, which means that any object that moves away from the point will experience a net force that will tend to move it further away. However, the L4 and L5 points are stable equilibrium points, meaning that an object that moves slightly away from the point will experience a net force that will tend to move it back towards the point. The L4 and L5 points are also called Trojan points. The fifth Lagrange point (L5) is located on the opposite side of the moon from the earth, forming an equilateral triangle with the moon and earth. It is about 60 degrees ahead of the moon in its orbit, and is sometimes called the "leading Trojan point."

More on gravity: https://brainly.com/question/29075167

#SPJ11

The main difference between a mission and a vision is that a mission defines a company's purpose, while a vision outlines its long-term goals.

The five characteristics of a vision are:

Inspiring: A vision should be inspiring and give people something to strive for. The primary difference between vision and mission is that the former defines the company's ultimate goal, whereas the latter outlines the company's strategic path to accomplishing that goal. A mission statement is a brief statement that summarizes an organization's core goal, competitive benefit, and guiding principles. It is a short, straightforward declaration of what a company intends to achieve in the long run.

A vision statement, on the other hand, is a forward-thinking declaration of where the company hopes to be in the future. It describes the company's aspirations and anticipations. In this answer, we will describe the five characteristics of a vision.

Five characteristics of a vision:

1. Clear and concise: A vision statement should be short, understandable, and to the point.

2. Realistic: It should be achievable while also being challenging.

3. Time-bound: It should have a timeframe within which it must be accomplished.

4. Flexible: It should be adaptable to shifting market dynamics, environmental conditions, or technological advancements.

5. Inspiring: It should motivate and engage staff, customers, and stakeholders.

Read more about vision here:

https://brainly.in/question/54671979

#SPJ11

We know that Fg = mg = 4.5 kg * 9.8 m/s² = 44.1 NTherefore, F(t) = F_net + Fg = 1.5525 N + 44.1 N = 45.6525 NThe magnitude of the force F when t = 3.60 s is 45.65 N.Given,The mass of the crate, m = 4.5 kgHeight of the crate above its initial position, y(t) = (2.80m/s )t + (0.61m/s³)t³Let F(t) be the force applied upward on the rope.The upward force F(t) acting on the crate = Weight of the crate - Tension in the ropeTension in the rope is because of the force applied upward.

Therefore,Tension in the rope, T = F(t) - mgWhere g is the acceleration due to gravity= 9.8 m/s²Let's differentiate the given height of the crate equation to obtain the velocity of the crate above its initial position, dy(t)/dt.dy(t)/dt = (2.80m/s) + 3(0.61m/s³)t²We can determine the velocity of the crate at t= 3.60s by substituting the value of t = 3.60s. dy(3.60s)/dt = (2.80m/s) + 3(0.61m/s³)(3.60s)² = 16.34 m/sFrom the equation of motion, v² = u² + 2asWhere v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance.The initial velocity, u = 0m/s.The distance traveled by the crate when the force is applied, s = (2.80m/s)t + (0.61m/s³)t³ = (2.80m/s)(3.60s) + (0.61m/s³)(3.60s)³ = 23.63 mThe acceleration, a = (v² - u²)/2s = (16.34m/s²)/47.26m = 0.345 m/s²The net force, F_net = maWhere m is the mass of the crate and a is the acceleration of the crate due to the applied force F(t).F_net = m * a = 4.5kg * 0.345m/s² = 1.5525 NThe net force F_net is the sum of the force applied upward F(t) and the weight of the crate Fg, F_net = F(t) - FgWe know that Fg = mg = 4.5 kg * 9.8 m/s² = 44.1 NTherefore, F(t) = F_net + Fg = 1.5525 N + 44.1 N = 45.6525 NThe magnitude of the force F when t = 3.60 s is 45.65 N.

For more questions on Force

https://brainly.com/question/15251816

#SPJ11

The work done on the block by friction during the motion of the block from point A to point B is 2.49 J.

The normal force acting on the block at point A and point B is different. We can find the weight of the block at points A and point B using the following formula:

Weight = mg,

where m is the mass of the block and g is the acceleration due to gravity.

Weight at point A = m × g

Weight at point B = m × g

Now, the normal force acting on the block at point A is given as 3.95 N.

Therefore, we can write the equation for the weight and normal force as:

Weight at point A - Normal force at point A = m × a

Now, at point A, the acceleration acting on the block is the centripetal acceleration a = v²/R where v is the velocity of the block at point A.

We can write the equation for the weight and normal force as:

m × g - 3.95 = m × v²/R

Similarly, at point B, we can write the equation for the weight and normal force as:

m × g - 0.680 = m × v²/R

Now, we can solve both the equations for the velocity of the block at point A and point B:

Velocity at point A, v₁ = √(gR - 3.95/m)

Velocity at point B, v₂ = √(gR - 0.680/m)

The change in kinetic energy during the motion from point A to point B is given by:

∆KE = KE₂ - KE₁

= (1/2)mv₂² - (1/2)mv₁²

We know that work done, W = ∆KE

So, the work done on the block by friction during the motion of the block from point A to point B is given by:

W = (1/2)m(v₂² - v₁²)

Substituting the values in the above equation:

W = (1/2) × 0.0400 × ((√(9.81 × 0.500 - 0.680/0.0400))² - (√(9.81 × 0.500 - 3.95/0.0400))²)

W = 2.49 J

Therefore, the work done on the block by friction is 2.49 J.

Learn more about Friction here:

https://brainly.com/question/24338873

#SPJ11

The forces acting on the turtle and the cat when they are on the ground and not moving are balanced. Therefore, option 1 is the correct answer.

When the forces are balanced, the object is at rest or it will move at a constant speed in a straight line. In this case, both the turtle and the cat are on the ground and not moving. Therefore, the forces acting on both of them are balanced.

Unbalanced forces cause the object to accelerate or change direction. The magnitude and direction of the forces are not equal in unbalanced forces. Therefore, options 2, 3, and 4 are incorrect answers.

To learn more about force: https://brainly.com/question/12785175

#SPJ11

The speed of an electron whose total energy is equal to the total energy of a proton that is at rest would be zero.

We can use the conservation of energy to solve this problem, where the total energy of the electron is equal to the total energy of the proton at rest. The total energy of a particle is given by the sum of its kinetic energy and rest energy (mass-energy), which is given by Einstein's famous equation, E=mc^2.

The rest energy of the electron and proton can be neglected compared to their kinetic energies, which are given by 1/2 mv^2, where m is the mass and v is the speed of the particle.

Since the total energy of the electron is equal to the total energy of the proton at rest, we can equate their kinetic energies:

1/2 me * ve^2 = 1/2 mp * 0^2

where me is the mass of the electron, mp is the mass of the proton, and ve is the speed of the electron.

Using the fact that the proton mass is about 1836 times the mass of the electron (mp/me = 1836), we can solve for the speed of the electron:

ve^2 = (mp/me) * 0^2 = 0

Therefore, ve = 0. The speed of the electron whose total energy is equal to the total energy of a proton at rest is zero, which means that the electron is not moving.

More on the speed of electrons can be found here: https://brainly.com/question/30194771

#SPJ1

(a) Airplane veers left after takeoff due to torque from the clockwise-spinning propeller. (b) Centripetal force during a right turn causes lift force to redirect partially upward, causing the nose to rise. Speed may affect nose drop.

(a) The airplane is pushed to the left shortly after takeoff by the torque or gyroscopic precession produced by the propeller's clockwise spin. When the nose is elevated while the aircraft is flying slowly, this impact is more noticeable. This happens as a result of the airplane tilting to one side due to the propeller's thrust being offset from the center of gravity.

(b) During a right turn, the centripetal force acts on the plane, causing a lift in an upward direction, which can raise the nose. However, a speed decrease can cause the nose to drop. Lift force is crucial in nose motion during turns

learn more about Centripetal force here:

https://brainly.com/question/14021112

#SPJ4

"The relationship between the laser wavelength λ, the angle of the m th bright fringe, and the diffraction grating spacing d is d sinθ = m λ."

Waves overlap as they spread out between slits. Constructive interference occurs along anti-nodal lines. Bright fringes are seen where anti-nodal lines intersect the viewing screen.

Diffraction gratings can be used to split light into its constituent wavelengths (colours). Although the output light intensity is typically much lower, it generally provides greater wavelength separation than a prism.

The bright fringes that result from constructive interference of the light waves from various slits are found at the same angles when light meets an entire array of identical, evenly spaced slits, known as a diffraction grating, as opposed to when there are only two slits. But the pattern is a lot more defined.

To know more about wavelength:

https://brainly.com/question/13034344

#SPJ4