WILL GIVE BRAINLIEST
Tree Identification Vocabulary:

bract – a leaflike structure often occurring between scales of cones
barb – a hooked or sharp bristle
Dichotomous Key

a. Leaves are needlelike, occurring in groups. go to #2
b. Leaves are needlelike leaves, go to #3 not grouped together (cover branch evenly).

a. Needles occur in groups of 2. Colorado Pinyon Pine (Pinus edulis)
b. Needles occur in groups of 3 or more. go to #4

a. Cones have scales with bracts. go to #5
b. Cones have rounded or wavy scales with no bracts. go to #6

a. Cones have barbs on the ends of scales. go to #7
b. Cones have smooth scales with no barbs. Sugar Pine (Pinus lambertiana)

a. Cones hang down from branch and have 3-pointed bracts. Douglas Fir (Pseudotsuga menziesii)
b. Cones are upright on branch. Noble Fir (Abies procera)
a. Cones are medium-sized and rounded. Most needles curve or point upward. Blackhills White Spruce (Picea glauca)
b. Cones are long and slender. Needles point forward. Colorado Blue Spruce (Picea pungens)
a. Cones have barbs that point upward. go to #8
b. Cones have spiny barbs that point downward. Coulter Pine (Pinus coulteri)
a. Needles are longer than the cones (longer than 4”) and slender. Jeffrey Pine (Pinus jeffreyi)
b. Needles are shorter than the cones (less than 2” long). Bristlecone Pine (Pinus aristata)
Fill in the following chart, using the dichotomous key to identify each tree. The first one has been completed for you. You should copy the chart and complete it using the lesson information.

A selenide ion is the isoelectronic with the noble gas is the correct option is d. krypton.

The atomic number of the selenide is 34. The electronic configuration of the selenide is as :

Electronic configuration of selenide = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁴

The selenide ion is Se²⁻, this means that the selenide ion gains the two electron and form the anion. The electronic configuration for the selenide ion is as :

Electronic configuration of Se²⁻ = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ or [Kr]

The atomic number of the krypton is 36. Therefore the selenide ion is isoelectronic with the krypton.

To learn more about krypton here

https://brainly.com/question/29480958

#SPJ4

A hydrogen bond is a type of non-covalent bond that occurs between a hydrogen atom covalently bonded to an electronegative atom (such as oxygen, nitrogen, or fluorine) and another electronegative atom.

A hydrogen bond is formed when an electronegative atom attracts a hydrogen atom that is partly positive and partially negative. This electrostatic attraction can happen between molecules or inside a single molecule, and it causes a reasonably strong, directed connection between the two atoms. Hydrogen bonds are crucial for many biological processes, including the folding of proteins and the construction of the DNA double helix, and they also greatly influence the physical and chemical characteristics of liquids like water. an electrostatic attraction between a hydrogen atom in one polar (such as water's) molecule and a tiny electronegative (such as oxygen, nitrogen, or fluorine) atom in typically another polar (such as water's) or non-polar (such as nitrogen) molecule.

For such more questions on hydrogen bond:

brainly.com/question/10904296

#SPJ4

Molarity of a solution made by  dissolving 26. 42 g of (nh4) 2 so4 in enough water to make 50 ml of solution is 3.8M.

Molar concentration (likewise called molarity, sum focus or substance focus) is a proportion of the centralization of a synthetic animal types, specifically of a solute in an answer, as far as measure of substance per unit volume of arrangement. In science, the most regularly involved unit for molarity is the quantity of moles per liter, having the unit image mol/L or mol/dm³ in SI unit. An answer with a grouping of 1 mol/L is supposed to be 1 molar, usually assigned as 1 M.

Molarity is number of moles of solute/volume of solution in liters

Here,number of moles of solute is =mass of solute/molar mass of solute.

Solute is (NH₄)₂SO₄,so molar mass of solute is 132.14g

Now,number of moles are =26.42/132.14=0.19mole.

Now,molarity =(0.19/50)×1000=3.8M.

Hence,molarity is 3,8M.

To know more about molarity,visit here:

https://brainly.com/question/8732513

#SPJ4

One example of a tetrahedral, polar molecule with both polar and nonpolar covalent bonds is CHCl3, also known as chloroform.

A Lewis structure, also known as a Lewis dot diagram or electron dot diagram, is a simplified representation of the valence electrons in an atom or molecule. The Lewis structure shows how the valence electrons are arranged around the atoms in the molecule, as well as the bonds that form between the atoms. Valence electrons are the outermost electrons in an atom, and they are responsible for the chemical properties of the element. In a Lewis structure, each valence electron is represented by a dot or cross, which is placed around the symbol of the element. The dots are arranged around the element symbol to represent the number of valence electrons, with each side of the symbol representing one of the four possible energy levels.

Here,

In this structure, the carbon atom is at the center, with four electron pairs around it: one from each of the three chlorine atoms and one from the hydrogen atom. The carbon-chlorine bonds are polar covalent bonds because chlorine is more electronegative than carbon, meaning it attracts electrons more strongly and creates a partial negative charge. The carbon-hydrogen bonds are nonpolar covalent bonds because carbon and hydrogen have similar electronegativities, meaning they share electrons equally and do not create partial charges. As a result of the polar and nonpolar covalent bonds, the molecule as a whole is polar, with a partial positive charge on the hydrogen atom and partial negative charges on the chlorine atoms.

Cl      Cl

 \      /

  C -- H

  |

  Cl

To know more about Lewis structure,

https://brainly.com/question/24076507

#SPJ1

The shape of the spectra in nuclear magnetic resonance (NMR) spectroscopy is primarily determined by the chemical environment of the nucleus being studied. In NMR spectroscopy, a sample is exposed to a magnetic field, and the resulting NMR spectrum reflects the absorption of energy by the nuclei in the sample as they undergo transitions between different energy levels.

What is Spectra?

In physics and chemistry, a spectrum (plural: spectra) is a range of electromagnetic radiation or other physical quantities, such as sound or mass, that are ordered by their wavelengths or frequencies. The term spectrum can refer to a continuous range of values or to a discrete set of lines or bands that correspond to specific energy transitions.

The chemical environment of a nucleus in a molecule affects its NMR spectrum in several ways. One important factor is the shielding or DE shielding effect of neighboring atoms or groups. When a nucleus is surrounded by electrons, it experiences a shielding effect that reduces its magnetic field, causing it to resonate at a lower frequency. Conversely, when a nucleus is DE shielded by nearby electron-withdrawing groups, it resonates at a higher frequency. This effect is responsible for the chemical shift observed in NMR spectra.

The shape of the NMR spectrum can also be influenced by other factors such as the number and arrangement of neighboring nuclei, the spin-spin coupling between nuclei, and the relaxation time of the nuclei in the sample. Together, these factors determine the complex patterns observed in NMR spectra and provide a wealth of information about the chemical structure and environment of molecules.

Learn more about Spectra from given link

https://brainly.com/question/1968356

#SPJ4

The collection of 1.25 * 10⁻¹⁹  electrons has a total charge of approximately -2.003 coulombs.

The charge of a single electron is approximately -1.602 * 10⁻¹⁹ coulombs. To find the total charge of a collection of electrons, we can multiply the number of electrons by the charge of each electron.

So, for a collection of 1.25 * 10⁻¹⁹  electrons, the total charge would be:

Q = (1.25 * 10⁻¹⁹ ) (-1.602 * 10⁻¹⁹)C/electron

Q = -2.003 C

Therefore, the collection of 1.25 * 10⁻¹⁹  electrons has a total charge of approximately -2.003 coulombs.

The coulomb (symbol: C) is the unit of electric charge in the International System of Units (SI). It is defined as the amount of electric charge transported in one second by a constant current of one ampere.

Learn more about electron charge here brainly.com/question/14494965

#SPJ4

Heroin is a degraded form of diamorphine. It is a semi-synthetic substance made from morphine that has been acetylated.

To learn more about diamorphine refer to:

https://brainly.com/question/30628592

#SPJ4

Answer:C

Explanation:

When water is barely boiling, it means the temp isn't the high at all. Answer A means it's boiling at a very high temp. And yeah I hope its right.

The pot that has the lowest temperature is the one that is just barely boiling. This means that it has not yet reached its boiling point and its temperature is likely below 100°C. The correct answer is C.

When water is boiling, it means that it has reached its boiling point or we can say that the water is transitioning from a liquid state to a gaseous state. We know that the boiling point of water is about 100°C or 212°F at standard pressure (atmospheric).

Learn more about definition and calculation of boiling point on:

According to the hydrocarbon combustion equation Both reactions are exothermic because they release energy in the form of heat.

Also, according to the calculation of the energy released in kJ/g, the Energy released by propane is 50.34 kJ/g and the Energy released by propane is 49.52 kJ/g. Therefore, propane is slightly more efficient than butane in terms of energy released per gram.

Explanation of the calculation of the hydrocarbon combustion:

The equation for hydrocarbon combustion is:
Hydrocarbon + Oxygen → Carbon Dioxide + Water + Energy

For propane (C3H8):
C3H8 + 5O2 → 3CO2 + 4H2O + Energy

For butane (C4H10):
C4H10 + 6.5O2 → 4CO2 + 5H2O + Energy

Both of these reactions are exothermic because they release energy in the form of heat.

Explanation of the calculation of the energy released in kJ/g:

To calculate the energy released by each gas in kJ/mole, we can use the standard enthalpy of combustion (∆Hc) values for propane and butane:

∆Hc for propane = -2220 kJ/mole
∆Hc for butane = -2878 kJ/mole

So, the energy released by propane is 2220 kJ/mole and the energy released by butane is 2878 kJ/mole.

To calculate the energy released in kJ/g, we can divide the energy released in kJ/mole by the molar mass of each gas:

Energy released by propane in kJ/g = 2220 kJ/mole / 44.1 g/mole = 50.34 kJ/g
Energy released by butane in kJ/g = 2878 kJ/mole / 58.12 g/mole = 49.52 kJ/g

Therefore, propane is slightly more efficient than butane in terms of energy released per gram.

Learn more about hydrocarbon combustion:

https://brainly.com/question/23146159

#SPJ11

There are the main periodic trends in the periodic that is the  electronegativity, the atomic size, the ionization energy, and the electron affinity, metallic character.

The  main periodic trends in the periodic table is as :

1) The Electronegativity is the measures of how easily atom can attract the electrons to form the bond.  it increases from left to right.

2) The atomic size decreases as we move in the period from the left to the right. the atomic size increases as we move in the group from the top to the bottom in the periodic table.

3) The ionization energy decreases as we move from to to the bottom in group.

4) The electron affinity increases as move left to right across period.

5) The metallic character decreases as we move left to right in period.

To learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

Lead chloride ( [tex]PbCl_{2}[/tex] ) is insoluble in water. The crystal lattice structure of lead chloride is very difficult to break down that means it requires high lattice energy to breakdown the structure.

Lead chloride also has certain ionic nature also makes them insoluble in water.

[tex]PbCl_{2}[/tex] is an ionic compound contains or consist both [tex]Pb_{2} +[/tex] and [tex]Cl-[/tex].

When PbCl2 is with water, the water molecules will come around the ions and tries to make them separate - pull them apart.

But as the attraction between positive and negative ions are very high, it won't separate.

That means it requires certain energy to separate the ions out of their electrostatic force and break the crystal lattice structure.

Learn more about Lead chloride:

https://brainly.com/question/30621799

#SPJ4

the number of grams of oxygen that are produced from the decomposition of 100g of kclo3 is 39.14 grams.

The balanced chemical equation for the decomposition of potassium chlorate (KClO3) is:

2KClO3(s) -> 2KCl(s) + 3O2(g)

According to this equation, 2 moles of KClO3 will produce 3 moles of O2.

The molar mass of KClO3 is approximately 122.55 g/mol, so 100 g of KClO3 is equivalent to 100/122.55 = 0.815 moles of KClO3.

Using the mole ratio from the balanced equation, we can calculate the number of moles of O2 produced:

0.815 moles KClO3 x (3 moles O2 / 2 moles KClO3) = 1.223 moles O2

Finally, we can calculate the mass of O2 produced using its molar mass, which is approximately 32 g/mol:

1.223 moles O2 x 32 g/mol = 39.14 g of O2

Therefore, approximately 39.14 grams of oxygen can be produced from the decomposition of 100 g of KClO3.

Learn more about decomposition here:

https://brainly.com/question/8009068

#SPJ4

The chemical that your brain releases when you are kind is called oxytocin.

Oxytocin is a hormone that is associated with social bonding, trust, and positive social interactions. It is released in response to positive social interactions, such as hugging or showing kindness to others.

Studies have shown that increased levels of oxytocin can lead to increased empathy and pro-social behavior, such as generosity and cooperation. Additionally, oxytocin has been shown to decrease stress levels and promote feelings of calm and relaxation.

Overall, practicing kindness can not only benefit those around us but also have positive effects on our own mental and emotional well-being.

Learn more about oxytocin

brainly.com/question/8492292

#SPJ4

C) High levels of Pfr triggers development of flower primordia in long day plants by promoting transcription of the gene CO is the correct statement.

What is Phytochromes ?

Phytochromes are a class of photoreceptor proteins found in plants, involved in the regulation of many important developmental processes, including seed germination, stem elongation, leaf expansion, and flowering.

Phytochromes sense changes in the relative ratio of red light (around 660 nm) to far-red light (around 730 nm) and undergo a reversible photoconversion between two states: the inactive, red-light absorbing form (Pr) and the active, far-red light absorbing form (Pfr).

Plants use phytochromes to sense changes in the ratio of red light (660 nm) to far-red light (730 nm) to measure day length. Phytochrome exists in two interconvertible forms: the inactive Pr (red-light absorbing) and the active Pfr (far-red light absorbing). The ratio of Pr to Pfr can be used by plants to track the duration of daylight.

In long-day plants, exposure to light triggers the conversion of Pr to Pfr, and high levels of Pfr promote the transcription of the gene CO (CONSTANS). CO is a transcription factor that activates the expression of other genes involved in flower development, leading to the formation of flower primordia.

In short-day plants, high levels of Pfr inhibit the transcription of the gene CO, preventing flower development until day length decreases and the Pfr levels decrease.

Therefore, statement A is incorrect, statement B is incorrect, and statement D is partially correct but does not directly answer the question.

Learn more about Phytochromes from given link

https://brainly.com/question/13048818

#SPJ4

To safeguard the standard of drinking water in the United States, the Safe Drinking Water Act (SDWA) was enacted. This legislation applies to all waters that are actually or hypothetically intended for consumption, whether they originate from above-ground or underground sources.

To learn more about safety Drinking Water refer to:

https://brainly.com/question/13377464

#SPJ4

Explanation:

When the water add acid there have the reaction then the molecules are evolve highly reactive which have produce bubble which cause our face directly but acid add in water there have less reactive molecules evolve ant there doesnot produce bubble

A chemical known as an acid-base indicator alters color when the pH of a solution changes. this statement is true.

To learn more about acid-base indicator refer to:

https://brainly.com/question/30553094

#SPJ4

The University of North Texas (UNT) Chemistry Department offers various scholarships to support undergraduate and graduate students who are pursuing degrees in chemistry or biochemistry.

These scholarships are intended to provide financial assistance to students who have demonstrated academic excellence, leadership potential, and a commitment to the field of chemistry.

The scholarships offered by the UNT Chemistry Department vary in terms of eligibility requirements, award amounts, and application procedures. Some scholarships are open to all chemistry and biochemistry majors, while others are more specific in their requirements, such as being a Texas resident, a U.S. citizen or permanent resident, or having a particular area of research interest.

The application typically includes information about the student's academic record, research experience, community involvement, and financial need. Some scholarships may require additional materials, such as letters of recommendation, a personal statement, or a research proposal.

Students who are awarded scholarships from the UNT Chemistry Department can use the funds to pay for tuition, fees, books, and other educational expenses.

For such more question on  chemistry

https://brainly.com/question/26854014

#SPJ4

Water in an ice cube tray is put into the freezer section of a refrigerator. as it freezes, this water: turns into ice.

What are properties of water?
Water is a chemical compound composed of two hydrogen atoms and one oxygen atom (H2O). It has a high boiling point (100°C) and melting point (0°C), making it a liquid at room temperature. It is also one of the most abundant substances on Earth and covers nearly 70% of the planet. Its surface tension and adhesive properties allow it to form droplets, it has a high heat capacity, and it is an excellent solvent for many substances. Water is also able to absorb a large amount of energy as it evaporates, making it a great tool for cooling. Additionally, water is able to exist in three different states: solid (ice), liquid, and gas (vapor).

Therefore, Water in an ice cube tray is put into the freezer section of a refrigerator. as it freezes, this water: turns into ice.

To learn more about properties of water

Here: https://brainly.com/question/20287051

#SPJ4

The molecular formula of glucose is C₆H₁₂O₆ and its empirical formula is CH₂O.

The molecular formula is defined as an expression which describes the number of atoms of each element in one molecule of a compound. Basically, molecular formula shows the actual number of each atom in a molecule.

Empirical formula is described as a chemical formula showing the simplest ratio of elements in a compound rather than the total number of atoms in the molecule.

The molecular formula of glucose is  C₆H₁₂O₆ because one molecule actually contains 6 C, 12 H, and 6 O atoms. Therefore, the simplest whole-number ratio of C to H to O atoms in glucose is 1:2:1, so the empirical formula is CH₂O.

Learn more about molecular and empirical mass from the link given below.

https://brainly.com/question/13348838

#SPJ4

To determine the pH of a solution of NaCl, we first need to find the concentration of the Na+ and Cl- ions in the solution. NaCl is a strong electrolyte and dissociates completely into Na+ and Cl- ions in water.

The molar mass of NaCl is 58.44 g/mol. Therefore, the number of moles of NaCl in 11.7 g can be calculated as:

moles of NaCl = mass of NaCl / molar mass of NaCl

moles of NaCl = 11.7 g / 58.44 g/mol

moles of NaCl = 0.2 mol

The volume of the solution is given as 200 mL, which is equal to 0.2 L. Therefore, the concentration of Na+ and Cl- ions in the solution can be calculated as follows:

concentration = moles / volume

concentration of Na+ or Cl- = 0.2 mol / 0.2 L

concentration of Na+ or Cl- = 1 M

Since NaCl is a neutral salt, it does not contribute to the acidity or basicity of the solution. Therefore, the pH of the solution can be calculated using the concentration of H+ ions in the solution, which can be assumed to be equal to the concentration of OH- ions due to the autoionization of water.

pH = -log[H+]

pH = -log[OH-]

At 25°C, the concentration of H+ ions in pure water is 1.0 × 10^-7 M. Therefore, the concentration of OH- ions is also 1.0 × 10^-7 M.

Since the solution is neutral, the concentration of H+ and OH- ions must be equal. Therefore:

[H+] = [OH-] = 1.0 × 10^-7 M

Taking the negative logarithm of both sides gives:

pH = -log(1.0 × 10^-7)

pH = 7.0

Therefore, the pH of the solution is 7.0.

what is pH of a solution?

The pH of a solution is a measure of its acidity or basicity. It is defined as the negative logarithm of the concentration of hydrogen ions in the solution, with a pH of 7 being neutral. The pH scale ranges from 0 to 14, with values less than 7 indicating acidity, values greater than 7 indicating basicity, and a pH of 7 indicating neutrality. A change of one unit on the pH scale represents a tenfold change in the concentration of hydrogen ions. The pH of a solution can be measured using a pH meter or through the use of indicators, which change color depending on the pH of the solution.

Hence, the answer is, the pH of the solution is 7.0.

To learn more about pH, follow the link:

https://brainly.com/question/15289741

#SPJ4

To prepare 10.0 ml of a 0.25% m/v HCl solution, you will need to mix 2.5 ml of 1% m/v HCl solution with 7.5 ml of distilled water.

To make 10.0 ml of a 0.25% m/v HCl solution from 1% m/v HCl, dilute the 1% m/v HCl solution by a factor of 4.

Here's how to figure out how much 1% m/v HCl and distilled water you'll need:

Determine the concentration of HCl in the final solution:

A 0.25% m/v HCl solution contains 0.25 grams of HCl per 100 mL. 

As a result, there will be 0.25 g/100 ml x 10 ml = 0.025 g of HCl in 10 ml of solution.

Determine the quantity of 1% m/v HCl required:

1% m/v HCl implies that there is one gram of HCl in every 100 ml of solution. You will need the following to make 0.025 g of HCl:

0.025 g/1 g x 100 ml = 2.5 ml of 1% m/v HCl solution

Determine the amount of distilled water required:

To prepare the remaining 7.5 ml of solution, use the following :

10 ml - 2.5 ml = 7.5 ml of distilled water

For more such questions on solution, click on:

https://brainly.com/question/23269908

#SPJ4

The new pressure would be 4 atm. Option D is correct.

The ideal gas law is given by PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. Since the gas is ideal, the number of moles remains constant.

If the temperature is doubled, the new temperature is 2T. If the volume is halved, the new volume is 0.5V. Substituting these new values into the ideal gas law, we get:

(1 atm) (0.5 V) = nR (2T)

0.5PV = 2nRT

2PV = 4nRT

Solving for P, we get:

P = (4nRT) / (2V) = 4 atm

Therefore, the new pressure is 4 atm.

To know more about  ideal gas law here

https://brainly.com/question/28257995

#SPJ4

--The given question is incomplete, the complete question is

"A system containing 1 atm of an ideal gas is doubled in temperature and halved in volume. What is the new pressure? A) 2 atm B) 1 atm C) 0.5 atm D) 4 atm"--

Only the bonding molecular orbitals can be occupied since only one electron is present in each of the unhybridized 2p orbitals, leaving four electrons accessible for bonding.

To learn more about bond orbitals refer to:

https://brainly.com/question/14649495

#SPJ4

In the term trace element, the modifier trace means elemental is required in very small amount.

Micronutrient is another name for a trace element. Additionally, it is described as any chemical element needed by living things in minute or small levels, typically as a component of an essential enzyme (cells produced by catalytic protein).

The precise requirements for trace elements vary depending on the species; for example, copper, zinc, manganese, boron, and molybdenum are frequently needed by plants. Animals frequently needed cobalt, manganese, and iodine.

Lack of essential animal trace elements utilised by animals in the soil may not harm plants, but animals consuming those plants acquire their deficiency diseases. Absence of essential plant trace elements required by plants in the soil results in deficiency disease.

Therefore, the term "trace" denotes a very minimal requirement for the elemental.

To learn more about trace element visit;

https://brainly.com/question/30420854

#SPJ4

The increasing concentration of atmospheric oxygen in Earth's early atmosphere is thought to be the result of the emergence and proliferation of photosynthetic organisms such as cyanobacteria.

What is Ethane?

Ethane is a hydrocarbon compound with the chemical formula C2H6. It is a colorless, odorless gas at standard temperature and pressure, and is the second simplest alkane after methane. Ethane is an important industrial chemical that is used primarily as a feedstock for the production of ethylene, which is then used in the manufacture of a wide range of plastics, resins, and other organic chemicals.

These organisms use sunlight to convert carbon dioxide and water into organic matter and oxygen gas through the process of photosynthesis. Over time, the accumulation of oxygen gas led to the development of the oxygen-rich atmosphere that supports complex life forms such as animals and plants. This process, known as the Great Oxygenation Event, occurred over a period of millions of years and is believed to have fundamentally altered the evolution and ecology of life on Earth.

Learn more about Ethane from given link

https://brainly.com/question/68465

#SPJ4

Ethan have to push with more force on table A than on table B because of the heavy mass of table A.

When applied, force generally defined as a external cause that alters or tends to modify the condition of the body. If indeed the body is moving this will come to rest, as well as if it is at rest, it will move. It can also induce changes in the body's orientation, form, size, and so on.

Ethan is helping his father rearrange the furniture in their living room. They have two different tables that are the same size. When Ethan pushes on each table, he finds that it is harder to move table A than it is to move table B. Ethan have to push with more force on table A than on table B because of the heavy mass of table A.

Therefore, ethan have to push with more force on table A than on table B because of the heavy mass of table A.

To learn more about force, here:

https://brainly.com/question/13014979

#SPJ9

Answer: Table A has more mass than table B.

Carbonic H₂CO₃ is a weak acid .

Being a weak acid, H₂CO₃ is unstable in the natural world.

When there is water present, it partially dissociates, releasing H+ and HCO₃- (bicarbonate) ions.

As carbonic acid is a diprotic acid, it can produce both bicarbonates and carbonates as salts.

Bicarbonate salts are produced when a base is added in modest amounts to H₂CO₃ , whereas carbonate salts are produced when a base is added in large amounts.

It should be noted that industrial fermentation procedures or the large-scale burning of fossil fuels can produce carbonic acid as a byproduct.

The preparation of carbonated water, sparkling wine, and other aerated drinks involve the use of carbonic acid.

know more about carbonic acid click here;

https://brainly.com/question/28175742

#SPJ4