Why would geothermal energy NOT be a possible energy source for many regions of the country?

A. Geothermal energy depends upon a nonrenewable resource.
B. Geothermal energy is only found in Arctic regions.
C. Geothermal energy is not always found in an area that is easily accessible.
D. Geothermal energy can only be used to grow tropical fruits.

Answers

Answer 1

Geothermal energy is not always found in an area that is easily accessible. (C)

Answer 2

Geothermal energy is not a possible energy source for many regions of the country. Because geothermal energy is not always found in an area that is easily accessible. Option C is correct.

What is geothermal energy?

Geothermal energy is the thermal energy in the Earth's crust that comes from the planet's creation and the radioactive decay of components in nearly equal amounts.

The disadvantage of using the geothermal energy is;

A. It is available only in limited areas.

B. It can cause air and groundwater pollution.

C. It is difficult to transport from place to place.

Geothermal energy is not a possible energy source for many regions of the country . Because geothermal energy is not always found in an area that is easily accessible.

Hence, option C is correct.

To learn more about the geothermal energy, refer to the link;

brainly.com/question/1061324

#SPJ2


Related Questions

What is the speed of a rocket that travels 9,000 meters in 12 seconds?

Answers

9,000/12=750

Speed is equal to distance divided by time
742.57 m/s .............

6. What is the resultant force on each car below? Remember TWO pieces of
information are needed.
7. What additional statement could we make about each car? Think about what key
words we could use

Answers

Explanation:

In first case, the forces on LHS and on RHS is the same i.e. 3 N. The force acting on the car is balanced force. As a result, the car will not move at all.

In second case,

Force on RHS = 2000 N

Force on LHS = -6000 N

Net force acting on it is given by :

F = 2000+(-6000)

= -4000 N

Hence, this is the required solution.

You are in a car traveling at 20 m/s. An ambulance is behind you traveling 35 m/s in the same direction. What frequency do you hear if the siren has a frequency of 550 Hz?

Answers

Answer:

The frequency heard is 576.78 Hz

Explanation:

The Doppler effect is defined as the apparent frequency change of a wave produced by the relative movement of the source with respect to its observer. In other words, this effect is the change in the perceived frequency of any wave motion when the sender and receiver, or observer, move relative to each other.

This is what happens in the first part of this problem, where the sender is train A and the receiver is train B. They are both moving in opposite directions. In this case, where both are in motion, the frequency perceived by the receiver will increase when receiver and transmitter increase their separation distance and will decrease whenever the separation distance between them is reduced. The following expression is considered the general case of the Doppler effect:

[tex]f'=f*\frac{v+-vR}{v+-vE}[/tex]

Where:

f ', f: Frequency perceived by the receiver and frequency emitted by the issuer respectively. Its unit of measurement in the International System (S.I.) is the hertz (Hz), which is the inverse unit of the second (1 Hz = 1 s-1)

v: Velocity of propagation of the wave in the medium. It is constant and depends on the characteristics of the medium. In this case, the speed of sound in air is considered to be 343 m / s

vR, vE: Speed ​​of the receiver and the emitter respectively. Its unit of measure in the S.I. is the m / s

±, ∓:

We will use the + sign:

In the numerator if the receiver approaches the emitter In the denominator if the emitter moves away from the receiver

We will use the sign -:

In the numerator if the receiver moves away from the emitter In the denominator if the emitter approaches the receiver

In this case you are in a car traveling at 20 m/s and an ambulance is behind you traveling 35 m/s in the same direction.

In this case the receiver, you in the car, moves away from the emitter, while the emitter, the ambulance, approaches the receiver behind you in the same direction. So the frequency is calculated by the expression:

[tex]f'=f*\frac{v-vR}{v-vE}[/tex]

Being:

f= 550 Hzv=343 m/svR= 20 m/svE= 35 m/s

and replacing:

[tex]f'=550 Hz*\frac{343 m/s-20 m/s}{343 m/s-35 m/s}[/tex]

you get:

f'= 576.78 Hz

The frequency heard is 576.78 Hz

3.1. A stone of mass 2kg is thrown vertically upward with a speed
of 20m's Calculate the maximum height reached.​

Answers

Answer:

20.41 m

Explanation:

Let's list out the relevant variables in this problem. Take the upwards direction to be positive and the downwards to be negative.

v₀ = 20 m/sv = 0 m/sa = -9.8 m/s² Δy = ?

We are using the fact that at maximum height, the object's velocity is 0 m/s right before it changes direction to fall vertically back down to Earth.

Find the constant acceleration equation that contains these four variables.

v² = v₀² + 2aΔy

Substitute the known values into the equation and solve for Δy, the maximum height.

(0)² = (20)² + 2(-9.8)Δy 0 = 400 - 19.6Δy -400 = -19.6Δy Δy = 20.4081632653

The maximum height of the stone is 20.41 m. Notice that its mass was irrelevant when solving for its maximum height when thrown.

Solids, liquids, and gases are very often depicted as groups of particles inside containers of fixed shape and dimension.
Using the simple model of solid, liquid, and gas, which of the following descriptions of physical properties is CORRECT?

A
The physical properties of this phase of matter are that the particles take the shape of the container, do not fill the entire volume, and are very strongly attracted to each other.
B
The physical properties of this phase of matter are that the particles take the shape of the container, do not fill the entire volume, and are strongly attracted to each other.
C
The physical properties of this phase of matter are that the particles take the shape of the container, they fill the entire volume of the container, and are strongly attracted to each other.
D
The physical properties of this phase of matter are that the particles do not take the shape of the container, they fill the entire volume, and are weakly attracted to each other.

Answers

Answer:

The answer would be B

Explanation:

Hope you have a good day

What is the object’s average acceleration between 0.0 s and 5.0 s?
ANSWER FAST! PLEASEE

Answers

Answer:

[tex]2.5[/tex]

Explanation:

[tex]0.0+5.0=5.0[/tex]

[tex]\frac{5}{2} =2.5[/tex]

hope this helps!!!!!!!!!!

Which law best describes this behavior of gases in the Sun?

Answers

Answer:

The extreme pressure from the weight of the gases that make up the Sun raises the temperature of the core enough for the nuclear reactions to take place, Which law best describes this behavior of gases in the Sun? A. Charles law.

Explanation:

if it is helpful....... plzz like and follow

(Cr(NH3).](Co(CN)6) is a coordination complex
compound. What is the percent composition of carbon in this
compound?

Answers

Answer:19.51%

Explanation:

c. Before space travel some people thought rockets would not work in space because there was no
atmosphere for the rocket exhaust to push against. Explain the error in this thinking using Newton's
third law.

Answers

Rockets can travel through space because there is no force holding or acting on them.So if the rocket travels and a certain velocity it will travel at the same velocity unless a force acts on it

testing related to criteria ​

Answers

Answer: Test criteria offers assistance the analyzer(s) to compose the test prepare. They ought to be chosen in understanding with the accessible test exertion. Test scope measures are characterized as a proportion between the test cases required for fulfilling the criteria and those of these which have been executed

Answer 7575

Explanation: the numbers are cool

Carbon (C) is an element found in living organisms. How would carbon be classified in the hierarchy of organisms?

Answers

Answer:

Explanation:

A cell

I NEED THIS ANSWERED ASAP WITH THE RIGHT ANSWER
A bicycle with a 15 kg mass is easily stopped when a force of 60 N is applied. How much force would be needed to stop the bicycle if the time allowed to stop the bike was doubled?

Answers

Answer:

Going downhill at a steady speed, the forces along the direction of motion are:

net force = m * a = 0

W * sin(7) - Fdrag = 0

so Fdrag = m * g * sin(7) where m=62.kg and g=9.8m/sec^2

Explanation:

Provide two examples of how health care workers can demonstrate their commitment to quality control through their personal appearance.

Answers

Standards of Performance can be used in numerous ways to help select applicants who are well suited to the healthcare organization’s culture. As we look at best practices for using healthcare standards of performance, we will share some specific examples. This week we examine standards for attitude and appearance.

Attitude:

Our job is to serve our customers and provide high quality service with care and courtesy.
Always thank customers for choosing our organization.
Exceed expectations.
Acknowledge a customer’s presence immediately. Smile and introduce yourself at once.
Attitude takes into account three things: our body language, our friendliness and our willingness to connect with our customers.

The body language that goes along with the words that we are speaking greatly influences how we are understood. In fact, experts tell us that how we speak is just as important as what we are saying! Our customers are our reason for being in the healthcare environment; our attitude should always be one of concern, respect and genuine caring.

As a customer yourself, do you remember those places of business where the staff was friendly and went out of its way to acknowledge you? Of course you do, since this was an environment where you felt welcomed. We exhibit friendliness by smiling warmly, introducing ourselves immediately, and never, ever ignoring someone. All our customers are equally deserving of attention.

Finally, we show the right attitude by meeting the needs of our customers or finding someone who can. We go out of our way to be helpful; for example, we don’t point the way – we accompany the customer to where they need to go. In addition, we always thank them for choosing us to provide their healthcare experience.

An attitude of service excellence is further exhibited by showing interest when a customer speaks to us. Each one, without exception, should be treated as if he or she is the most important person in our facility; and rudeness is never acceptable. We are attentive to the customer’s immediate need, or gladly take the individual to someone better equipped to provide the service. We always apologize for problems and inconveniences, and enthusiastically carry out service recovery.

Lastly, we recognize that our customers have a sense of urgency and show them that we value their time. Customers are not an interruption of our work; they are our focal point, and caring for them with an attitude that shows we value them should be our daily goal.

Appearance:

Be clean and professional.
Follow dress code policies and wear your identification badge correctly at all times.
Pick up litter and dispose of it properly.
Clean up spills and return equipment to its proper place.
How long does it take to make a first impression on a customer? Just seven seconds, according to popular research. How our customers perceive us in that brief time is very important because it sets the stage for their entire healthcare experience. A first impression is sometimes referred to a “moment of truth” because customers believe that what they are hearing, seeing or feeling is reality – that is, the truth of the situation. No matter that their first impression is merely a snapshot of less than one moment in time. It is perceived as genuine: who we are, the quality of service that we deliver, or our physical environment of care. Needless to say, making that first impression a good one is crucial.

Moments of truth are directly impacted by the appearance of staff as well as that of the workplace, both of which are a direct representation of our organization. When we dress appropriately for the job and wear our name badges so that they are easily readable, we project professionalism to our customers. We not only create a good first impression, but we also reinforce our culture of quality through attention to personal appearance. The same principle applies to our healthcare setting. When we take pains to keep our workspace uncluttered and to pick up trash in hallways and public areas, we are sending a positive message to those who enter the doors of our facility for the first time. We should always take pride in how we present ourselves and in the facility itself. Doing so conveys respect for customers and their expectations.

In a penalty kick, a soccer player kicks the ball from ground level with an initial velocity of .5.0 m/s,20.0^ above the horizontal . Assume that air resistance is negligible . What is the maximum height , y max of the soccer ball ?
A)0.51
B)3.2
C)3.7
D)8.6

What is the flight time of the soccer ball in the previous problem?
A)0.76 s
B)0.87 s
C) 1.3 s
D) 1.7 s

Answers

It is a and then c On the questions 1 and 2

A 5 kg object is moving downward at a velocity of 12 m/s and is
currently 2.6 meters above the ground.

calculate its kinetic energy
calculate its potential energy
calculate its mechanical energy

Answers

Answer:

the first one i think

Explanation:

Warm air rises because it has less ___________.

Answers

Answer:

because it is less dense than the surrounding air

Explanation:

What is the cheetahs momentum?

Answers

Answer:

Momentum is mass*velocity. Cheetah: 74*31 = 2294 kg-m/s.

Which is NOT an example of evidence that shows a chemical reaction occurred?
change in color
change in temperature
change in shape
bubbles, fizzing

Answers

Change in color
Change in color is a physical reaction

A piece of metal has a volume of 2.0 x 10-5 m3.
The density of the metal is 8.0 x 103 kg/m3.
What is its mass?
A. 2.5 103 kg
B.4.0 x 102 kg
C.1.6 101 kg
D.1.6 x 105 kg

Answers

Anwser- A

Hope it helps

Shrill sound is of -------------- *

Higher frequency
Lower frequency
Higher amplitude
Lower amplitude

Answers

Answer:

Higher frequency.

Explanation:

Sound are mechanical waves that are highly dependent on matter for their propagation and transmission.

Sound travels faster through solids than it does through either liquids or gases. A student could verify this statement by measuring the time required for sound to travel a set distance through a solid, a liquid, and a gas.

Mathematically, the speed of a sound is given by the formula:

[tex] Speed = wavelength * frequency [/tex]

Generally, the frequency of a sound wave determines the pitch of the sound that would be heard.

A shrill sound refers to a type of sound that is typically sharp, high pitched and as such has higher frequency.

Hence, shrill sound is of higher frequency.

Why does the moon appear to change its shape as seen from Earth

A.Different parts of the sunlit moon become visible as the moon revolves around the Earth

B.Different parts of the moon are lit as the moon rotates

C.The moon moves farther and then closer to Earth

D.The sun lights different parts of the moon during different seasons

Answers

Answer:

Explanation:

Why does the moon appear to change its shape as seen from Earth

Help Easy Question and Brainly. What's the answer?????

Answers

Answer:

negatively

Explanation:

Answer:

Negatively charged

Explanation:

PLS ANSWER MY QUESTION TOO

Which pair of moving pulses in a rope will produce
destructive interference?

Answers

I think it’s A hope this helps :)

Classify each substance as either a conductor or insulator.

A sample of mercury:
✔ conductor

A piece of glass:
✔ insulator

A rubber hose:
✔ insulator

A negatively ionized lithium paste:
✔ conductor

Answers

The correct classification of each substance is as follows:

A sample of mercury: conductorA piece of glass: insulatorA rubber hose: insulatorA negatively ionized lithium paste: conductor

What are conductors and insulators?

A conductor is a substance that can transmit electricity, heat, light or sound while an insulator is a substance that does not transmit heat, sound or electricity.

Conductors are usually metals while insulators are usually non-metals. Examples of conductors include;

IronAluminumCopper

Examples of insulators include;

GlassPaperWoodSilk

Therefore, the correct classification of each substance is as follows:

A sample of mercury: conductorA piece of glass: insulatorA rubber hose: insulatorA negatively ionized lithium paste: conductor

Learn more about conduction at: https://brainly.com/question/18084972

#SPJ1

Answer:

Explanation:

E2020

From an apple tree 2 metres high, a 100g mass apple fell of the tree, what work did it do?

Answers

Answer:

W = 1.96 J

Explanation:

Given that,

The mass of an Apple, m = 100 g = 0.1 kg

It fell from 2 metres high tree.

We need to find the work done by it. The work done is given by :

[tex]W=mgh\\\\W=0.1\times 9.8\times 2\\W=1.96\ J[/tex]

So, the required work done is 1.96 J.

Two rocks of masses 5 kg and 10 kg a dropped from rest from a height of 20 m above ground. Ignore all friction and air resistance. Just before
they hit the ground, which statement is true about the rocks?
(A) The value for the acceleration of the 5 kg rock is the same as the value for the 10 kg rock, but their velocity values are different.
(B) The values for the acceleration and velocity of the 5 kg rock are greater than the values for the 10 kg rock.
(C) The values for the acceleration and velocity of the 5 kg rock are less than the values for the 10 kg rock.
(D) The values for the acceleration and velocity of the 5 kg rock are the same as the values for the 10 kg rock.

Answers

Answer:

D

Explanation:

F=ma

F of 5 kg rock = 49N

F of 10 kg rock = 98 N

Divide by respective masses to get acceleration, and of course you will get 9.8 m/s^2 for both.

Now, use potential energy equals kinetic energy. mgh=(1/2)mv^2 mass cancels out of the equation, since it's on both sides, so we can stop right there. We have algebraically determined that mass does not affect acceleration or velocity!

Hope this helped.

What is the speed of a rocket that travels 10000 meters in 15 seconds?
Help a brother out

Answers

Answer:

666.67

Explanation:

the formula is speed = distance ÷ time

by the way I approximated the answer hope that it help I'm not sure it's right but I hope it is.

The least penetrating form of radiation is
X rays
gamma radiation
ОООО
alpha radiation
beta radiation

Answers

Answer:

radio radiation........

Answer

C.( Alpha particles!

Which experiment proved light was a wave?

A) Photoelectric effect
B) Double Slit
C) Compton Scattering
D Light was never proved to be a wave

Answers

Answer:

The answer is B) Double slit

a car is traveling north on the interstate. They cover 645 miles in 9 hours. What is the car's average velocity ?

Answers

Answer:

71.6 mph

Explanation:

you would do 645 divided by 9 which would give you 71.6

Other Questions
How did most Presidents treat "business" in the 40 years leading up to Roosevelt's Presidency? what are the different types of document required for mail merge? Can someone help me thanks If each of the numbers in the following data set were multiplied by 26, whatwould be the new median of the data set?14, 20, 18, 58, 71, 36O A. 728OB. 520O C. 936O D. 676 Not sure how to do this, the lesson didn't explain this well. Someone help and please make sure its right :) What describes Esquivel's primary purpose in her essay "At the Hearth"?O to instruct the reader in how to prepare nutritious mealsO to entertain the reader with quaint stories of her childhoodto inform and persuade the reader about her dream of a "New Man"to persuade the reader to consider giving up meat what is global warming? What should you do with a chemical burn?A. use butter on the burn, bandage, and send the employee home to restB. use ice on the burn, bandage, and send the employee to the hospitalC.do not touch the victim, keep the victim quiet and call for medical assistanceD. call for medical assistance and check the MSDS for emergency interventions Giving Brainliets if correct! This is important T^TTheo made a list of items he saw. Orchid, water, air, fan, grass, fishWhich statement is correct about the items in the list? A.Fish, water, and air are created from nonliving matter. B.The basic functional unit of water, air, and fan is the cell. C.Orchid, grass, and fish are created from nonliving matter. D.The basic functional unit of orchid, grass, and fish is the cell. PLS ANSWER FAST WILL GIVE BRAINLY!!!In order for a roller coaster to work, why does the hill the cart climbs need to be higher than the top of the loop? How many moles are in 281 g of Ca(OH)2? Why are the physical representations of LeWitt's work usually temporary? PLEASE HELP !! ILL GIVE BRAINLIEST *EXTRA 40 POINTS* DONT SKIP :(( .! If the force exerted by a man is halved and the distance is multiplied by four, by which factor does the work change ? A. Increase by a factor of 8 B. Decrease by a factor of 2C. Increase by a factor of 2D. Increase by a factor of 4 Yolanda reads 7 1/2 chapters in 3 1/8 hours. What is the unit rate in chapters per hour? Write your answer as a fraction or a mixed number in simplest form. Object A is moving due east, while object B is moving due north. They collide and stick together in a completely inelastic collision. Momentum is conserved. Object A has a mass of m A = 17.0 kg and an initial velocity of v 0A = 8.00 m/s, due east. Object B, however has a mass of m B = 29.0 kg and an initial velocity of v 0B = 5.00 m/s, due north. Find the magnitude and direction of the total momentum of the two-object system after the collision. The information in DNA Is coded in chemical bases adenosine (A) guanine (G) cytosine (C), and thymine (T) We can represent a DNA strand by stringing together the letters representing the appropriate strand. Imagine we are given a list of DNA strands which have arbitrary lengths. Write a single function strand_counter() which takes a list of DNA strands, counts the lengths of each of the words in the list and then calculates and returns the integer maximum_length integer minimum_length, and float average_length Then write a program which takes in a user-chosen number of strands of arbitrary length as an input and prints out the calculated information Example input 5 AT ATCGTCOGGT TCGCT TCGATTCCT TTCATCG Example output The longest strand has length 10. The shortest strand has length 2. The average length of the strands is 6.6. Need help with this one question! 3x+2-10-3x=Term:Like Term:Coefficients:Constant:Which one is it?