HCl is used instead of plain deionized water in p-phenetidine in amide synthesis of acetophenetidin because HCl's polarity contributes to a reaction driven to the right, it is used for the acid-base reaction rather than water. It protonates the amine group, allowing it to dissolve easily.
What is acid-base reaction ?An acid-base neutralization reaction is represented as a double-replacement reaction in this traditional representation. For example, the reaction of hydrochloric acid (HCl) with sodium hydroxide (NaOH) solutions yields a solution of sodium chloride (NaCl) and a few extra water molecules.
When acid and base react, they produce salt and water. Water and salt are both neutral, which means that when acid and base react, they neutralize each other. As a result, it is known as a neutralization reaction.
Thus, HCl's polarity contributes to a reaction driven to the right.
To learn more about an acid-base reaction, follow the link;
https://brainly.com/question/3069273
#SPJ1
why woukd path 2 require less energy than path 1
Activation energy is defined as the energy difference between the reactant and the maximum in the energy profile diagram.
From the graph, it is clear that Path 1 is at higher energy than path 2. Which implies that we need to provide more energy to the reactant in order to cross the energy barrier of path 1 as compared to path 2. Therefore, the reaction will occur through path 2 where less amount of energy will be used in order to overcome activation energy barrier.
As soon as this energy barrier is crossed, the reaction can occur easily to form product.
The given question is incomplete so the I have answered according to general knowledge.
The diagram of the path is attached in the image given below.
Lear more about activation energy from the link given below.
https://brainly.com/question/28384644
#SPJ4
7.explain in your own words how na and k start, continue, and reset the action potential along a neuron. (3 pts)
The passage of sodium (Na+) and potassium (K+) ions through the cell membrane is what causes and sustains the action potential in a neuron.
Because there is a large concentration of K+ ions and a low concentration of Na+ ions inside the neuron while it is at rest, the inside of the cell has a negative charge compared to the exterior. An electrical signal opens the sodium ion channels in the neuron, allowing Na+ ions to enter the cell and produce an influx of positively charged ions. This shift in charge, known as depolarization, causes additional sodium channels to open and more potassium channels to close, further depolarizing the cell.
Eventually, the cell reaches its threshold for an action potential and generates an all-or-nothing electrical signal that travels along the neuron. After the signal has passed, potassium channels open, and potassium ions flow out of the cell, repolarizing the cell and resetting it to its resting state.
Learn more about cell membrane:
brainly.com/question/13524386
#SPJ4
9. A very large helium filled balloon has a volume of 38.1 L and is at a high altitude where the
temperature is 0.00°C and the pressure is 471 torr. It is returned to the ground where the T is
24.0°C and its volume is now 22.9 L. What is the pressure on the ground?
Answer:
753 torr.
Explanation:
The pressure at the ground can be calculated using the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature.
First, we'll find n by using the fact that the number of moles is constant, n1V1 = n2V2. We'll use the ideal gas law to solve for P on the ground:
P = (nRT) / V = (n * R * (24 + 273.15) * 22.9) / 22.9 = (n * R * 297.15) / 22.9
Plugging in the initial values from the high altitude, we have:
n = (38.1 * 471) / (R * (0 + 273.15)) = (38.1 * 471) / (8.31 * 273.15)
So, finally:
P = (n * R * 297.15) / 22.9 = (38.1 * 471 * 8.31 * 297.15) / (22.9 * 273.15) = 753 torr
The pressure on the ground is 753 torr.
How many mLs of 4.0 M Sucrose solution and water do you need to make 10 mLs of
a) a 0.9 M and
b) 0.4 M Sucrose solution?
a)We need 2.25 mL of 4.0 M Sucrose solution and 7.75 mL of water to make 10 mL of a 0.9 M Sucrose solution.
b)We need 1 mL of 4.0 M Sucrose solution and 9 mL of water to make 10 mL of a 0.4 M Sucrose solution.
a)To make 10 mL of a 0.9 M Sucrose solution, we need to calculate the amount of 4.0 M Sucrose solution and water required:
Let's call the volume of 4.0 M Sucrose solution used in the solution "x".
Since the concentration of the final solution is 0.9 M, the number of moles of sucrose in the final solution is:
[tex]0.9 M * 10 = 9 * 10^-3[/tex] moles
Since the initial concentration of the sucrose solution is 4.0 M, the number of moles of sucrose in the initial solution is:
[tex]4.0 M * 1 = 4x * 10^-^3[/tex] moles.
Since the number of moles of sucrose must remain constant, we can equate the two:
[tex]9 * 10^-^3 = 4x * 10^-^3[/tex]
x = 2.25 mL
b)Let's call the volume of 4.0 M Sucrose solution used in the solution "y".
Since the concentration of the final solution is 0.4 M, the number of moles of sucrose in the final solution is:
[tex]0.4 M * 10 = 4 x 10^-^3[/tex]
Since the initial concentration of the sucrose solution is 4.0 M, the number of moles of sucrose in the initial solution is:
[tex]4.0 M * y = 4y * 10^-^3[/tex]
Since the number of moles of sucrose must remain constant, we can equate the two:
[tex]4 * 10^-^3 = 4y * 10^-^3[/tex]
y = 1 mL
What is the C1V1 C2V2 formula?
Proportional sets. C1V1=C2V2 is used to calculate an unknown quantity where two solutions/mixtures are proportional
C1V1 = Concentration/amount (start) and Volume (start) C2V2 = Concentration/amount (final) and Volume (final)
What is the dilution formula called?
This process is known as dilution. We can relate the concentrations and volumes before and after a dilution using the following equation: M₁V₁ = M₂V₂ where M₁ and V₁ represent the molarity and volume of the initial concentrated solution and M₂ and V₂ represent the molarity and volume of the final diluted solution.
To know more about the dilution formula:
https://brainly.com/question/7208939
#SPJ1
What are the general properties of acids?
The general properties of acids are:
They are sour in taste.Metals react with acids to produce hydrogen gas.Acids react with bases.Acids have a pH lower than 7.What are the 3 most important acids?
1. Hydrochloric acid (HCl)
2. Nitric acid (HNO3)
3. Sulfuric acid (H2SO4)
Acids typically have a sour taste, react with metals to produce hydrogen gas, react with bases to produce salts and water, are corrosive to many materials, have a pH lower than 7, and can donate protons (H+ ions). Metals react with acids to produce hydrogen gas because the hydrogen ions in the acid replace some of the metal ions in the metal, thus forming hydrogen gas. Acids react with bases to produce salts and water as a result of the reaction between the hydrogen ions in the acid and the hydroxide ions in the base. Acids have a pH lower than 7 because the hydrogen ions in the acid increase the hydrogen ion concentration in the solution. Finally, acids can donate protons (H+ ions) because the hydrogen ions in the acid can be released from the acid and transferred to another molecule.
Therefore, Acids are sour in taste, Metals react with acids to produce hydrogen gas, Acids react with bases, and Acids have a pH lower than 7.
To learn more about acids from the link
https://brainly.com/question/14072179
#SPJ4
What is the volume of a 2.5 g block of metal if its density is 4.75 g/cm3?
A) 0.53 cm3 B) 1.9 cm3 C) 2.5 cm3 D) 4.75 cm3 E) 11.9 cm3
The volume of a 2.5 g block of metal if its density is 4.75 g/cm3 is 0.53 cm3.
What is the meaning of density of metal?
Density of metal is a measure of the mass of a unit volume of a material. It is typically expressed in units of grams per cubic centimeter (g/cm3). It is an important property of metal as it can be used to determine many characteristics such as strength, malleability, ductility, and electrical conductivity. The density of different metals can vary significantly. For example, the density of aluminum is 2.70 g/cm³, iron is 7.87 g/cm³, and lead is 11.34 g/cm³.
mass = 2.5g
D = 4.75 g/cm^3
4.75 g/cm^3 = 2.5g / V
To solve for V, multiply by V on both sides and then divide by 4.75
You get V = 2.5 g / 4.75 g/cm^3
V = .526 cm^3
Therefore, option (A) 0.53 cm3 is the correct answer.
To learn more about density of metal from the link
https://brainly.com/question/30136124
#SPJ4
The table below describes geological events. HHHHHEEEEELPPPP MEEEEEE
Event Boundary where they occur
Convergent Divergent Transform
A Yes Yes Yes
B No Yes No
Which statement is most likely correct?
Group of answer choices
Event A represents earthquakes and Event B represents formation of ocean basins.
Event A represents formation of ocean basins and Event B represents earthquakes.
Event A represents volcanic eruption and Event B represents creation of mountain ranges.
Event A represents creation of mountain ranges and Event B represents volcanic eruption.
Based on the plate boundaries where the given geologic events occur, Event A represents the creation of mountain ranges and Event B represents volcanic eruption.
The correct option is D.
What are divergent and convergent plate boundaries?When two tectonic plates diverge from one another, a divergent boundary results. Along these borders, earthquakes frequently occur and magma (molten rock) rises to the surface where it solidifies to form a new oceanic crust. Divergent plate boundaries include the Mid-Atlantic Ridge.
When two or more lithospheric plates collide, the result is a region on Earth known as a convergent boundary, also called a destructive boundary. Eventually, a plate subducts beneath another, a process is known as subduction. The Wadati-Benioff zone, a plane where numerous earthquakes take place, can be used to designate the subduction zone.
Learn more about divergent and convergent plate boundaries at: https://brainly.com/question/1193305
#SPJ1
Which statement is true for two pieces of iron at the same temperature? Responses Heat flows from the larger object to the smaller object. Heat flows from the larger object to the smaller object. The total kinetic energy of their particles is equal. The total kinetic energy of their particles is equal. Heat flows from the object with higher potential energy to the object with lower potential energy. Heat flows from the object with higher potential energy to the object with lower potential energy. The average kinetic energy of their particles is the same.
The statement is true for two pieces of iron at the same temperature is the average kinetic energy of their particles is the same. Therefore, option D is correct.
What is kinetic energy ?Kinetic energy is the energy of motion, which can be seen as an object or subatomic particle moving. Kinetic energy exists in every moving object and particle.
Kinetic energy is demonstrated by a person walking, a soaring baseball, a crumb falling from a table, and a charged particle in an electric field.
The statement is true for two pieces of iron at the same temperature if their particles have the same average kinetic energy.
Thus, option D is correct.
To learn more about the kinetic energy, follow the link;
https://brainly.com/question/15764612
#SPJ1
the enantiomer of thalidomide that causes developmental defects is______
The thalidomide catastrophe led to stricter rules for medication approval in numerous nations. Thalidomide is a racemic combination of the (R)- and (S)-enantiomers and exists in two mirror-image forms. The (S)-isomer is teratogenic, whereas the (R)-enantiomer has sedative properties.
What enantiomer of thalidomide causes defects?Enantiomer theory enters the picture at this point. The thalidomide molecule can be found in two different forms in nature, (R)-thalidomide and (S)-thalidomide, which are enantiomers, or molecules that are mirror images of one another.
While the (S)-form is a teratogen, an agent that can result in birth abnormalities, the (R)-form possesses therapeutic qualities.
Therefore, It is extremely difficult and dangerous to isolate pure (R)- thalidomide because the two enantiomers of the drug regularly interconvert in the body to create a mixture that contains both enantiomers.
Learn more about enantiomer here:
https://brainly.com/question/10927981
#SPJ4
Polyester has properties similar to nylon except it is easily broken down by light and concentrated acid.
how many mol of pcl5 are in 0.17 g of pcl5?
To determine the number of moles of PCl₅ in 0.17 g of PCl₅, we need to use the molar mass of PCl₅. From this, there are approximately 0.000816 moles of PCl₅ in 0.17 g of PCl5.
The molar mass of PCl₅ can be calculated by summing the atomic masses of its constituent elements: phosphorus (P) and chlorine (Cl).
Molar mass of PCl₅:
P: 1 atom × atomic mass of P = 1 × 30.97 g/mol = 30.97 g/mol
Cl: 5 atoms × atomic mass of Cl = 5 ×35.45 g/mol = 177.25 g/mol
Total molar mass of PCl₅ = 30.97 g/mol + 177.25 g/mol = 208.22 g/mol
Now, we can calculate the number of moles using the given mass and molar mass:
Number of moles = Mass / Molar mass
Number of moles = 0.17 g / 208.22 g/mol
Calculating the value:
Number of moles ≈ 0.000816 moles
Therefore, there are approximately 0.000816 moles of PCl₅ in 0.17 g of PCl₅.
Learn more about moles here:
https://brainly.com/question/15209553
#SPJ 12
Please answer with a correct answer!!! thank you so much
. what were the six important ir wavenumbers/wavenumber ranges discussed in the video webcast lecture? (hint: separated by colors.)
The IR (Infrared) wavenumbers and wavenumber ranges are important in the study of molecular vibrations and chemical analysis. The six important IR wavenumbers/wavenumber ranges are: 4000-3000 cm^-1 (yellow)
This wavenumber range is associated with the bending vibrations of O-H and N-H bonds in organic compounds, as well as the stretching vibrations of C-H bonds. The fingerprint region is also present in this range, where the majority of the peaks observed are due to the combination and overtone vibrations of functional groups.
3000-2800 cm^-1 (orange)
This wavenumber range is associated with the stretching vibrations of C-H bonds in alkanes and alkenes. This region is also known as the methylene stretching region.
2800-2400 cm^-1 (green)
This wavenumber range is associated with the stretching vibrations of C-H bonds in aromatic compounds and the bending vibrations of C-H bonds in aliphatic compounds. The peaks in this region are typically broader and less intense than the peaks in the previous regions.
1700-1500 cm^-1 (blue)
This wavenumber range is associated with the C=O stretching vibrations in carboxylic acids and esters, as well as the N-H bending vibrations in amines. This region is also known as the carbonyl stretching region.
1300-1000 cm^-1 (purple)
This wavenumber range is associated with the stretching vibrations of C-O bonds in alcohols and ethers, as well as the bending vibrations of N-H bonds in amides. This region is also known as the C-O stretching region.
1000-400 cm^-1 (red)
This wavenumber range is associated with the stretching vibrations of the skeleton and bending vibrations of functional groups in organic compounds. The peaks in this region are typically weaker and broader than the peaks in the previous regions.
It's important to note that these wavenumber ranges and associated vibrations are just a general guide and actual peaks may differ based on the specific compound being analyzed.
Here you can learn more about wavenumber range
https://brainly.com/question/29564915#
#SPJ11
in which direction does the equilibrium lie in the acid-base reaction below? equilibrium lies towards the
Equilibrium lies towards the weaker side having weaker base and weaker acid.
Because equilibria favour the reaction side with the lowest-energy species, acid-base reactions will benefit the side with the weakest acids and bases because weak acids and bases have lower energies than strong acids and bases. Typically, a reaction's equilibrium will favour the side with weaker acids and bases.
The equilibrium position will be less than one if the equilibrium concentration of the reactants is greater than the equilibrium concentration of the products. It is said that this equilibrium position lies to the left. The equilibrium position will be greater than one when the equilibrium concentration of the products is greater than the reactant concentration.
To learn about equilibrium
https://brainly.com/question/28527601
#SPJ4
After the terrorist attacks of September 11th, 2001, the National Center on the Psychology of Terrorism was founded to research psychological aspects of terrorism. This is an example of how __________ affect theories and perspectives in psychology.The sociocultural perspective was greatly influenced by an increase in cultural diversity.
defend the assertion that all of life as we know it depends critically on the fact that the angle between the two hydrogen atoms in the water molecule is 104.5 and not 180
The assertion is based on the idea that the molecular geometry of water is important for its unique properties that are essential for life.
Water is a polar molecule, meaning that it has a positive and negative end due to the uneven distribution of electrons. The angle between the two hydrogen atoms in the water molecule contributes to the molecular geometry, which in turn determines the polar nature of the molecule. This polarity is responsible for many of water's unique properties, such as its high heat capacity, its ability to dissolve ionic and polar substances, and its high surface tension.
These properties are essential for life as we know it because they allow cells to regulate their internal environment, transport nutrients and waste, and maintain their shape and integrity. In addition, water's ability to dissolve ionic and polar substances makes it an ideal medium for chemical reactions, which are the basis of cellular metabolism and other biological processes.
In conclusion, the molecular geometry of water, including the angle between the two hydrogen atoms, is critical for the unique properties of water that are essential for life as we know it. If the angle between the hydrogen atoms was 180 degrees, water would have a different molecular geometry, which would result in different properties and potentially make life as we know it impossible.
Learn more about polar molecule here:
https://brainly.com/question/11405437
#SPJ4
What is the molar mass of acetic acid (CH3COOH)?
The molar mass of acetic acid (CH₃COOH) can be calculated by adding up the atomic masses of its constituent atoms. It is found out to be 60 g/mol.
The molar mass of a compound is the sum of the atomic masses of the atoms it is comprised of. It gives the amount of substance present in 1 mole of the compound.
The atomic masses of atoms comprising a molecule of acetic acid are as follows:
Carbon (C) - 12 g/mol
Hydrogen (H) - 1 g/mol
Oxygen (O) - 16 g/mol
Therefore, substituting the values of the constituent atoms, we get the molar mass of acetic acid as:
Molar mass of acetic acid (CH₃COOH) = (2 × atomic mass of C) + (4 × atomic mass of H) + (2 × atomic mass of O)
= (2×12) + (4×1) + (2×16)
= 24 + 4 + 32 = 60 g/mol
Learn more about molar mass in:
https://brainly.com/question/30640134
#SPJ12
Determine the preure change when a contant volume of ga at 2. 00 atm i heated from 30. 0 degree celciu to 40. 0 degre celciu
Answer:
The pressure change when a constant volume of gas is heated can be determined using the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant and T is the temperature in kelvins.
Since the volume is constant, we can assume that the change in pressure is proportional to the change in temperature, so we can use the equation:
ΔP = (nRT2 - nRT1) / V
where ΔP is the change in pressure, T2 is the final temperature, and T1 is the initial temperature.
To convert from degrees Celsius to kelvins, add 273.15 to the temperature in degrees Celsius. So, for an initial temperature of 30.0°C, T1 = 30.0 + 273.15 = 303.15 K. And for a final temperature of 40.0°C, T2 = 40.0 + 273.15 = 313.15 K.
Plugging in the values, we have:
ΔP = (nRT2 - nRT1) / V = (n * R * 313.15 - n * R * 303.15) / V = (R * 10) / V = R * 10 / V
The pressure change can be found by multiplying the result by the initial pressure:
ΔP = R * 10 / V * P1 = (8.31 J/mol * K) * 10 / V * 2.00 atm = 16.62 / V atm
The exact pressure change will depend on the volume of the gas, but since the volume is constant, the pressure change will always be equal to 16.62 / V atm.
Explanation:
For a fixed amount of gas at a constant temperature, the volume of the gas increases as the pressure decreases.
Yes, this relationship is described by Boyle's Law.
Key points on Boyle's Law:
Boyle's Law states that the volume of a gas is inversely proportional to its pressure, provided that the temperature remains constant.This means that as the pressure of a gas increases, its volume decreases, and vice versa.The law was named after the Irish chemist and physicist Robert Boyle, who first published it in 1662.Boyle's Law is based on experiments in which the volume of a gas was measured at different pressures. It was found that the product of the pressure and volume of the gas remained constant for a given amount of gas at a constant temperature.Mathematically, Boyle's Law can be represented as PV = k, where P is the pressure of the gasV is its volumek is a constant.Boyle's Law has important implications for many real-world applications, including the design of gas storage tanks, the operation of air conditioning and refrigeration systems, and the understanding of atmospheric pressure.
Learn more about Boyle's Law.
https://brainly.com/question/1696010
SPJ4
which of the following sets of quantum numbers (n, l, ml, ms) is not permitted? (3,1, 1,-1/2 ) (3,0, 1, 1/2 ) (4,3, 3,-1/2 ) (4,1, 1, 1/2 ) (3,3,0, 1/2 )
The correct response is d. It is not allowed to be using the helps to keep track of quantum numbers: n = 3, l - 3, ml = -2, and ms = -1/2.
What four things can we infer from quantum numbers?The energy the energetic status of an asteroid's electron is represented by quantum numbers. The figures represent the energy, magnetic moment, angular moment, and spin of an electron.
What exactly is a quantum number?Quantum numbers refer to the collection of digits used to express the location and energy of an electron within an atom. Quantum numbers come in four varieties: primary, azimuthal, magnetic, and spin general formula. Quantum numbers provide the value of the preserved quantities in a quantum system.
To know more about quantum number visit:
https://brainly.com/question/14650411
#SPJ4
1. write the electron configuration for each atom or ion. then explain the distribution of electrons among energy levels. a. ca (2 points)
Find the atom's atomic number if you need to write the electron configurations for an atom of any element. When dealing with charged atoms, you should add one electron for every negative charge and take away one for every positive charge. Enter the electron configuration to show the atom's total number of electrons, broken down into orbital sets.
A numerical depiction of an atom's electron orbitals is called the electron configuration. The variously shaped areas surrounding an atom's nucleus known as electron orbitals are where electrons are predicted to exist mathematically. A reader can quickly and easily learn from an electron configuration both how many electron orbitals an atom has and how many electrons are present in each of those orbitals. You'll be able to construct your own configurations and ace those chemistry exams after you comprehend the fundamental ideas behind electron configuration.
Lean more about electron configurations here:
https://brainly.com/question/26084288
#SPJ4
A fuel is combined with oxygen to produce carbon dioxide and water. definition of what word.???
The chemical reaction in which a hydrocarbon combines with oxygen to produce carbon dioxide, water, and heat is referred to as hydrocarbon combustion.
Hydrocarbons are molecules that are made up of both hydrogen and carbon. Energy is extracted from fossil fuels by combustion (burning).
Combustion is a chemical reaction in which a material combines quickly with oxygen and produces heat. The initial material is referred to as the fuel, while the supply of oxygen is referred to as the oxidizer.
Combustion is a high-temperature exothermic (heat-releasing) redox (oxygen-adding) chemical process that occurs between a fuel and an oxidant, generally ambient oxygen, to generate oxidized, frequently gaseous products in a mixture known as smoke.
Learn more about carbon dioxide
https://brainly.com/question/29968202
#SPJ4
Which is the limiting reactant when 5. 00 g of h2 and 10. 0 g of o2 react and form water?.
When 5.00 g of H₂ and 10.0 g of O₂ react and form water, the limiting reactant is H₂.
Reagents that are fully consumed during the course of a chemical reaction are known as limiting reagents. They might also be referred to as limiting reactants or agents. The stoichiometry of chemical processes states that a specific number of reactants must be present for the reaction to be completed.
The reaction showing the combination of hydrogen and oxygen to form water is as shown:
2H₂ + O₂ → 2H₂O
The limiting reactant would be hydrogen because it runs out twice as quickly as oxygen.
Because it restricts the reaction rather than allowing it to proceed hypothetically, the limiting reagent or reactant is crucial because it can inform a chemist that only x moles of compounds can occur when the ideal quantity is employed with how much of this substance is used.
To know more about limiting reactant from the link
brainly.com/question/19033878
#SPJ4
What gae are obtained at the two electrode when electrolyi of acidulated water i done in lab?
During the electrolysis of acidulated water, the water molecules are decomposed into hydrogen and oxygen gas at the electrodes.
Electrolysis is a process where an electric current is passed through a substance to produce a chemical reaction. This process uses electrical energy to break down the chemical bonds in the substance, resulting in the formation of new substances.
In the case of electrolysis of aqueous solutions, the solution is composed of positively charged ions (cations) and negatively charged ions (anions). The cations are attracted to the cathode, while the anions are attracted to the anode. At the cathode, cations are reduced, meaning they gain electrons, while at the anode, anions are oxidized, meaning they lose electrons.
In a laboratory setting, the electrolysis of acidulated water (water with added acid) typically involves the use of two electrodes, an anode, and a cathode. During the electrolysis, the water molecules are decomposed into hydrogen and oxygen gas at the electrodes.
At the anode, the electrode where oxidation takes place, water molecules undergo oxidation to release hydrogen ions (H+) and oxygen (O2). The hydrogen ions are reduced to form hydrogen gas (H2), which is released at the anode. The standard Gibbs free energy (ΔG°) of the anode reaction can be represented as:
2H2O (l) → O2 (g) + 4H+ (aq) + 4e-
At the cathode, the electrode where reduction takes place, hydrogen ions are reduced to form hydrogen gas (H2). The standard Gibbs free energy (ΔG°) of the cathode reaction can be represented as:
2H+ (aq) + 2e- → H2 (g)
Therefore, During the electrolysis of acidulated water, the water molecules are decomposed into hydrogen and oxygen gas at the electrodes.
To know more about electrolysis refer to:
brainly.com/question/12054569
#SPJ4
When 13. 95 ml of hcl of unknown concentration (but less than that of the base) are reacted with 13. 00 ml of 2. 08 m naoh, 1. 51 kj of heat are released. What is the molarity of the hcl solution?.
The solution volume of HCl is 13.91 mL and the volume and concentration of NaOH are 15.00 mL and 3.161 M, respectively. Then the required acid concentration is 3.409 M
HCl and NaOH react, then the reaction can be written as follows:
HCl + NaOH → NaCl + H₂O
Acids and bases are in a 1:1 mole ratio, which means we can use the following formula:
MaVa = MbVb
with:
Ma = molarity of the acid
Va = volume of acid
Mb = base molarity
Vb = base volume
So, to calculate the molarity of HCl is:
Ma = MbVb/Va
Ma = (3.161)(15.00)/ 13.91
Ma = 3.409 M
Learn more about the formula of acid concentration at https://brainly.com/question/16911101
#SPJ4
Conider a ample of carbon tetrafluoride that contain 1. 01 × 10²⁴ atom of fluorine. Uing the formula CF₄ and that you have 1. 68 mole of F, determine what quantity in mole of carbon tetrafluoride are preent
The quantity in mole of carbon tetrafluoride are present is 0.84 moles CF₄
The simplest perfluorocarbon is tetrafluoromethane, sometimes referred to as carbon tetrafluoride or R-14 (CF₄). Tetrafluoromethane, as its IUPAC name suggests, is the perfluorinated equivalent of the hydrocarbon methane. It is also a haloalkane or halomethane, respectively. In addition to being a helpful refrigerant, tetrafluoromethane also a strong greenhouse gas. The carbon-fluorine bond's makeup gives it a very high bond strength.
To calculate mole of carbon tetrafluoride first we should write the valance reaction equation
C + 2F₂ → CF₄
From the give reaction we know that 1 mole of C requires 2 moles of F₂ to produce 1 mole of CF₄.
1. 68 moles of C will produce= 1/2 x 1.68 moles = 0.84 moles CF₄
Learn more about moles at https://brainly.com/question/19003766
#SPJ4
Which one of the following is NOT basic?
a) OH-
b) NO3-
c) NH3
d) SO4^-2
e) HPO4 ^-2
And explain why
The one from the following is not the basic is the correct option is b) NO₃⁻.
a) The hydroxide ion (OH⁻) is the strong base and is formed by the loss of the proton by H₂O.
b) The nitrate ion is the conjugate base of the nitric acid (HNO₃). It is formed when the nitric acid loses a proton. The nitric acid is a very strong acid, and its conjugate base is weak base.
c) NH₃ that is Ammonia is the moderately basic with the pH value of the 11.6.
d) SO₄²⁻ this basic in nature.
e) HPO₄⁻ the is basic in nature.
To learn more about base here
https://brainly.com/question/29715742
#SPJ4
Which is the weakest among the following types of bond?
A. Ionic bond
B. Metallic bond
C. Covalent bond
D. Hydrogen bond
Since hydrogen bonds are merely forces of attraction to the dipoles and not true bonds, they are the weakest. On two atoms that are strongly electronegative in nature and permanently bound to a hydrogen atom.
What kind of bond is weakest, and why?
Dispersion forces are a frequent name for the weakest links. When the electrons in two nearby atoms occupy positions that cause the atoms to temporarily form dipoles, the resulting transient attractive attraction is known as the dispersion force.
Which type of bond—covalent or ionic—is weak?
Ionic bonds typically outweigh covalent connections in strength. Ionic bonds result in a stable composite when all of the electrons between the components are transferred. Covalent bonds only involve the sharing of electrons between two parties.
To know more about hydrogen visit:
brainly.com/question/28937951
#SPJ4
what mass of cu(no 3 )2 would you need to make 450.0 ml of a 0.750 m solution
The mass of the Cu(NO₃)₂ would we need to make the 450.0 mL of a 0.750 M solution is 61.8 g.
The molarity of the Cu(NO₃)₂ =0.750 M
The volume of the Cu(NO₃)₂ = 450.0 mL = 0.450 L
The molarity expression is as :
Molarity = moles / volume
Moles = molarity × volume
Moles = 0.750 × 0.450
Moles = 0.33 mol
The moles = mass / molar mass
The mass of the Cu(NO₃)₂ = moles × molar mass
The mass of the Cu(NO₃)₂ = 0.33 × 187.5
The mass of the Cu(NO₃)₂ = 61 .8 g
thus, the mass of Cu(NO₃)₂ is 61.8 g.
To learn more about mass here
https://brainly.com/question/22969592
#SPJ4
construct a three‑step synthesis of 1,2‑epoxycyclopentane from bromocyclopentane by dragging the appropriate formulas into the bins. note that each bin should hold only one item, and not all of the given reagents or structures will be used.
(1) Bromination, (2) E2 elimination, and (3) epoxidation is formed by 1,2‑epoxycyclopentane from bromocyclopentane by dragging the appropriate formulas into the bin.
Step 1: Bromocyclopentane is reacted with hydrobromic acid and silver oxide to produce 1,2‑dibromocyclopentane.
Step 2: 1,2‑dibromocyclopentane is then reacted with a base, such as sodium hydroxide, to produce 1,2‑epoxycyclopentane.
Step 3: Finally, the 1,2‑epoxycyclopentane is reacted with aqueous acid to form 1,2‑epoxycyclopentane.
Bromocyclopentane responds with sodium methoxide to frame tertiary liquor, sulfated with sulfuric acid, then treated with base to yield 1,2-epoxy cyclopentane.
To learn more about the chemical reactions at
https://brainly.com/question/29762834
#SPJ4