Answer:
Because if we changed the subscript number we will change the identity of the compound and we Well creat a new compound or substance different than what they gave us to balance also the law of conservation of mass states that the mass cannot be created nor destroyed.
Explanation:
At a pressure of 1. 00 atm and a temperature of 20°C, 1. 72 g CO2 win dissolve in 1L of water. How much CO2 will dis solve if the pressure is raised to 1. 35 atm and the temperature stays the same?
2.32 g of CO2 will dissolve if the pressure is raised to 1. 35 atm and the temperature will remain the same.
The given data is:
Pressure = 1 atm
Temperature = 20 degrees = 293 K
CO2 weight = 1.72g
Water weight = 1L
Henry's law is used which defines that the amount of gas dissolved in a fluid is proportional to the partial pressure of the gas beyond the liquid.
Mathematically,
C = kH * P
C is the concentration of the gas given.
1.72 g CO2 / 44.01 g/mol = 0.039 mol CO2
C = 0.039 mol/L
kH = C/P
kH = 0.039 mol/L / 1 atm = 0.039 mol/(L*atm)
CO2 when the pressure is raised to 1.35 atm:
P' = 1.35 atm
C' = kH * P'
C' = (0.039 mol/(L*atm)) * 1.35 atm
C' = 0.0527 mol/L
The amount of CO2 dissolved in the water is
m = C' * M * V
m = 0.0527 mol/L * 44.01 g/mol * 1 L
m = 2.32 g
Therefore, a pressure of 1.35 atm is required and at a temperature of 20°C, makes 2.32g of CO2 will dissolve.
To learn more about temperature problems
https://brainly.com/question/22736363
#SPJ4
how would the value of the atomic mass of the metal calculated be affected if the hot metal sample cooled off before it was transferred to the water in the calorimeter? would it be too high or too low?
The value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.
How is atomic mass calculated?The atomic mass of an element is defined as the mass of an atom of an element in atomic mass units (amu). One atomic mass unit is defined as 1/12th of the mass of an atom of carbon-12.
The atomic mass of an element can be calculated using the following formula:
Atomic mass = (mass of isotope 1 × % abundance of isotope 1) + (mass of isotope 2 × % abundance of isotope 2) + (mass of isotope 3 × % abundance of isotope 3) + ...
If the hot metal sample cooled off before it was transferred to the water in the calorimeter, the temperature of the sample would have decreased. The decrease in temperature would result in a decrease in the thermal energy of the sample. Consequently, the amount of heat absorbed by the water in the calorimeter would decrease, leading to a lower value of the heat capacity of the metal.
Since the heat capacity is directly proportional to the mass of the sample, a lower value of the heat capacity would lead to a higher value of the atomic mass of the metal calculated. Therefore, the value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.
Learn more about atomic mass here: https://brainly.com/question/3187640.
#SPJ11
Below is the electron configuration for an atom of oxygen. Which of the following statements is/are true? select all that apply1s2 2s2 2p2 3s1A. The atom of oxygen represented by this configuration will have a chargeB. This specific electron configuration has three unpaired electrons.C. This specific electron configuration has one unpaired election
The electronic configuration for an atom of oxygen is:
1s2 2s2 2p2
The correct options is:
C. This specific electron configuration has one unpaired electron.
What is electronic configuration?Electron configuration can be defined as the specific arrangement of negatively charged electrons in different energy levels around atomic nuclei.
The correct statements about this electron configuration are:
A. The atom of oxygen represented by this configuration will have a charge: This statement is incorrect. The electron configuration provided is for a neutral oxygen atom, which means it has no charge.
B. This specific electron configuration has three unpaired electrons: This statement is incorrect. The 2p subshell contains a total of 4 electrons, which are arranged in 2 orbitals with opposite spins. This means that there are 2 paired electrons and 2 unpaired electrons, not 3.
C. This specific electron configuration has one unpaired electron: This statement is correct. The 2p subshell contains 2 orbitals, each of which can hold a maximum of 2 electrons. Since the 2p subshell contains 4 electrons, there are 2 paired electrons and 2 unpaired electrons, with one unpaired electron in each of the two 2p orbitals.
Learn more about electronic configuration:
https://brainly.com/question/26084288
#SPJ11
What are the 5 chemical bonds?
There are five chemical bonds that you can learn about in chemistry. These chemical bonds include: Covalent bond, Ionic bond, Polar covalent bond, Metallic bond, and Hydrogen bond.
Covalent bond: It is the bond formed by sharing electrons between two atoms. It is one of the most powerful chemical bonds that holds molecules together. This bond can be formed between atoms of the same or different elements.
Ionic bond: It is the bond formed by the transfer of electrons from one atom to another. This bond is formed between metals and non-metals.
Polar covalent bond: It is the bond formed between two atoms that have different electronegativity values. The electrons in this bond are shared unequally between the two atoms. This bond is intermediate between the covalent and ionic bond.
Metallic bond: It is the bond formed between metal atoms. In this bond, electrons move freely between metal atoms.
Hydrogen bond: It is the bond formed between a hydrogen atom and an electronegative atom. This bond is responsible for many of the unique properties of water.
Learn more about Chemical bonds here:
https://brainly.com/question/12907148
#SPJ11
If a solid piece of shiny sodium metal is exposed to chlorine gas, a large amount of heat is released and the white solid sodium chloride (table salt) forms. Based on this information, which of the following statements is TRUE? A) This process was exothermic_ B) This process represents a physical change: C) Mass is lost during this process_ D) This process was endothermic_
Option A is the correct statement for the process was exothermic that a large amount of heat is released when sodium metal is exposed to chlorine gas.
What happens when sodium is exposed to chlorine? Sodium metal reacts with chlorine gas to produce sodium chloride. When solid shiny sodium metal is exposed to chlorine gas, a large amount of heat is generated, and the white solid sodium chloride (table salt) is formed. So the process is an exothermic reaction.A chemical reaction in which heat is given out, such as the one between sodium and chlorine, is exothermic. When the products' energy is less than the reactants' energy, energy is given out from the system into the surroundings, resulting in an increase in temperature in the surroundings. Therefore, this process was an exothermic and the correct option is 'A'.Learn more about sodium chloride: https://brainly.com/question/28106660
#SPJ11
What precipitate will form when a solution of aluminum chloride is mixed with a solution of potassium phosphate?
The precipitate that will form when a solution of aluminum chloride is mixed with a solution of potassium phosphate is aluminum phosphate (AlPO4).
When aluminum chloride and potassium phosphate are mixed together, the cations and anions form different combinations of ion pairs. This causes the precipitation of a solid phase (AlPO4) from the solution. The chemical reaction that occurs can be represented as follows:
3K3PO4 + 2AlCl3 → 6KCl + AlPO4
The aluminum ion (Al3+) in the aluminum chloride solution and the phosphate ion (PO43−) in the potassium phosphate solution combine to form a precipitate of aluminum phosphate (AlPO4). The resulting solid aluminum phosphate (AlPO4) will appear as a white or slightly yellowish powder. The solubility of AlPO4 in water is relatively low, with a solubility of about 0.06 grams per liter of water at room temperature (25°C).
Therefore, it will readily settle out of the solution as a solid mass, rather than remaining dissolved.
for such more question on aluminum phosphate
https://brainly.com/question/29732488
#SPJ11
The density of a substance is 1.63g/mL. What is the mass of 0.25L of the substance in grams? A. 4.075g B. 40.75g C. 407.5g D. 4075g
Answer:
Explanation: Use the formula density = mass divided by volume
so to get the answer multiply the density by the volume
Answer: 1.63 x (0.25x1000)
we multiply 0.25 by 1000 because we need to use volume in ml instead of L.
methanol occurs naturally and has several isomers. state the structural feature of menthol which is responsible for it having enantiomers
Menthol, like methanol, occurs naturally and has several isomers. One structural characteristic of menthol that is responsible for it having enantiomers is that it has a chiral center.
Chiral centers are atoms with four different substituents attached to them, and they are a type of stereocenter. Menthol has a chiral center, which means it has two possible enantiomers.
Enantiomers are molecules that are mirror images of each other and cannot be superimposed on one another.
The two enantiomers of menthol are (1R,2S,5R)-(−)-menthol and (1S,2R,5S)-(+)-menthol. They have identical physical and chemical properties, except for their interaction with polarized light. This is due to the fact that they rotate plane-polarized light in opposite directions.
To learn more about "menthol", visit: brainly.com/question/21296029
#SPJ11
Complete the statements about the different types of lipids. ______ are the building blocks for many lipids and generally contain an even number of carbon atoms and an unbranched hydrocarbon chain.______ are lipid compounds that contain a fused ring system. These compounds contain three six-membered rings and one five-membered ring, and some of these compounds are found in biological membranes. ______ are formed when a carbohydrate is glycosidically linked to a hydroxyl group of a lipid. These compounds are also found in biological membranes and include gangliosides and cerebrosides. ______ are the storage form of lipids that accumulate in adipose tissue and can be used as metabolic fuel. These compounds have a polar head, made of three ester groups, and a nonpolar fatty acid tail. ______ are made up of a long-chain amino alcohol joined to a fatty acid by either a glycosidic or phosphodiester linkage. These compounds, which are commonly found in the nervous system, do not contain glycerol. ______ are formed when glycerol is esterified to two fatty acids and a phosphoric acid molecule. These compounds are also found in biological membranes.
Answer:
Fatty acids
Steroids
Glycolipids
Triacylglycerols
Sphingolipids
Phospholipids
the diagram represents the reaction of hydrogen gas and oxygen gas to produce water. which statement best describes the reaction? (1 point) responses more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is exothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is exothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is endothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is endothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is endothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is endothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is exothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is exothermic. skip to navigation
The reaction of hydrogen gas and oxygen gas to produce water is an exothermic reaction because more energy is released in the formation of the products than is needed to break the bonds of the reactants.
In other words, more energy is released when the hydrogen and oxygen molecules combine to form water molecules than is needed to break the bonds between the hydrogen and oxygen molecules.
Exothermic reaction- It is a type of reaction in which the two atoms react with each other to form a stable compound and release energy in the process of doing so.
To learn more about "reaction", visit: https://brainly.com/question/11231920
#SPJ11
in the planet x of the z constellation, the martian found two isotopes of an element that he named m, 79m and 81m, whose masses (78.9183 and 80.9163 amu) and abundances (50.69% and 49.31%) were determined in earlier experiments. calculate the average atomic mass of m.
The average atomic mass of m is 79.90 amu.
The average atomic mass of m is given by the formula below:
The average atomic mass of m= [(Abundance of 79m * Mass of 79m) + (Abundance of 81m * Mass of 81m)]/100
Average atomic mass of m = [(50.69% * 78.9183 amu) + (49.31% * 80.9163 amu)]/100
The average atomic mass of m = [(0.5069 * 78.9183) + (0.4931 * 80.9163)]/100
The average atomic mass of m = 79.90 amu
Therefore, the average atomic mass of m is found to be 79.90 amu.
To learn more about isotopes refer - https://brainly.com/question/24873591
#SPJ11
what is the function of the electron transport chain in cellular respiration ?
The electron transport chain (ETC) is an essential part of cellular respiration, which is a series of molecules that transfer electrons from one molecule to another used by cells to convert nutrients into energy.
This starts with the oxidation of molecules such as glucose, which releases electrons that are then transferred to a series of electron carriers in the ETC. The electron carriers are molecules that hold the electrons and can transfer them to other molecules which is known as redox reactions. As the electrons move through the ETC, they release energy which is used to form a proton gradient that is then used to drive the synthesis of ATP, the energy currency of the cell. The ETC is an essential part of cellular respiration as it is the process responsible for generating the energy necessary for cells to function.
To learn more about electron click here https://brainly.com/question/28977387
#SPJ4
Define rancidity. Which type of fatty acids is most susceptible to rancidity? What environment factors trigger rancidity?
Food fats and oils decay through a process known as rancidity, which affects the taste, texture, and flavour of the meal as well as the odour and smell. Unsaturated fatty acid oxidation is what triggers this process.
Rancidity is known to be influenced by time, temperature, light, air, exposed surface, moisture, nitrogenous organic material, and traces of metals.
Unsaturated fatty acids that contain double bonds in their molecules are peroxidation-prone. Lipids can undergo this peroxidation, often known as "oxidative degradation," in one of two ways. Autoxidation is one method, and it's by far the most significant one. A less significant alternative is an enzymatic oxidation. A fatty acid molecule undergoes oxidation when an oxygen ion replaces a hydrogen ion, and the likelihood of autoxidation rises as the number of double bonds increases inside the fatty acid.
Learn more about Rancidity here:
https://brainly.com/question/9861217
#SPJ4
based on the balance reaction between iron and oxygen, how many electrons are transferred when 27 g of iron react?
When 27 g of iron reacts with oxygen, a total of 8 electrons are transferred.
The balanced equation for this reaction is:
4Fe + 3O2 → 2Fe2O3
This equation tells us that 4 moles of iron (Fe) react with 3 moles of oxygen (O2) to form 2 moles of iron oxide (Fe2O3).
Molar mass of iron = 55.85 g/mol.
The number of moles: 27 g Fe × (1 mol Fe/55.85 g Fe) = 0.483 mol Fe
Therefore, 27 g of iron is equivalent to 0.483 moles of iron.
0.483 mol Fe × 4 electrons/mol Fe = 1.932 electrons
To convert this value to the number of electrons per 27 g of iron. To do this, we can use Avogadro's number, which tells us the number of particles (including electrons) in one mole of a substance:
1.932 electrons/mol × 6.022 × 10^23 electrons/mol = 1.162 × 10^24 electrons ≈ 8
Therefore, the number of electrons transferred when 27 g of iron reacts is approximately 8.
To know more about iron click here:
https://brainly.com/question/30570319
#SPJ11
based on this information, which of the following is correct? a. succinate dehydrogenase is the enzyme, and fumarate is the substrate fumarate is the product, and malonic acid is a noncompetitive inhibitor. b. malonic acid is the product, and fumarate is a competitive inhibitor. c. succinate is the substrate, and fumarate is the product. d. succinate dehydrogenase is the enzyme, and malonic acid is the substrate.
The correct option based on the information given is:a. succinate dehydrogenase is the enzyme, and fumarate is the substrate.
Explanation:Succinate dehydrogenase is the enzyme involved in the conversion of succinate to fumarate.
This enzyme complex is also known as Complex II of the electron transport chain. The reaction catalyzed by succinate dehydrogenase is an oxidation-reduction reaction.
In this reaction, succinate is oxidized to fumarate, and FAD is reduced to FADH2.
This reaction is an important step in the process of cellular respiration, as it generates a molecule of FADH2 that can be used to produce ATP through oxidative phosphorylation.
These inhibitors bind to the active site of the enzyme and block the binding of succinate
.This inhibition is reversible, as the inhibitor can be displaced by high concentrations of substrate
For more information about succinate dehydrogenase refer here :
https://brainly.com/question/13943912?
#SPJ11
Does the constancy in colour intensity indicate the dynamic nature of equilibrium? Explain your answer with appropriate reasons.
Therefore, the constancy in color intensity can be an indicator of a dynamic equilibrium, where the rates of the forward and reverse reactions are equal and the concentrations of reactants and products remain constant over time.
What is equilibrium?Chemical equilibrium occurs when a reversible reaction takes place, where the reactants can form products and the products can also react to form reactants. At the beginning of the reaction, the reactants are transformed into products, and as the reaction progresses, the concentration of the reactants decreases while the concentration of the products increases. Eventually, a point is reached where the rate of the forward reaction is equal to the rate of the reverse reaction, and the concentrations of the reactants and products remain constant. This state is called chemical equilibrium.
Here,
The constancy in color intensity can indicate the dynamic nature of equilibrium in certain cases. In a chemical equilibrium, the forward and reverse reactions are occurring simultaneously, but at equal rates, resulting in a constant concentration of reactants and products. Many chemical reactions involve colored species, and changes in the intensity of the color can indicate a change in the concentration of the species involved. For example, consider the reaction between iodine and starch:
I2 + starch ⇌ I2-starch complex
In this reaction, the iodine-starch complex is a blue-purple color, while the reactants (iodine and starch) are colorless. As the reaction proceeds, the concentration of the complex increases, leading to an increase in color intensity. However, if the reaction reaches equilibrium, the forward and reverse reactions will be occurring at equal rates, and the concentration of the complex will remain constant. This will result in a constant color intensity, indicating the dynamic nature of the equilibrium.
To know more about equilibrium,
https://brainly.com/question/29627805
#SPJ1
which one of the following molecules has the highest boiling point? you will explain why in the next question. responses 3-methoxy-1-propanol 3-methoxy-1-propanol 1,2-dimethoxyethane 1,2-dimethoxyethane 1,4-butanediol 1,4-butanediol 1,1-dimethoxyethane 1,1-dimethoxyethane 2-methoxy-1-propanol
The molecule with the highest boiling point is 1,4-butanediol. This is because of the presence of intermolecular hydrogen bonding. Thus, the correct option is C.
What is intermolecular hydrogen bonding?A hydrogen bond is an intermolecular force that exists between a hydrogen atom bonded to a highly electronegative atom (like N, O, or F) and another highly electronegative atom in another molecule. Hydrogen bonding is a type of dipole-dipole interaction that occurs between molecules that have a permanent dipole.
The four molecules, 3-methoxy-1-propanol, 1,2-dimethoxyethane, 1,4-butanediol, and 2-methoxy-1-propanol, all have oxygen atoms that are capable of forming hydrogen bonds. In order to form a hydrogen bond, a hydrogen atom in one molecule must be bonded to an electronegative atom like oxygen or nitrogen, and another electronegative atom in a neighboring molecule must be present.
In this case, 1,4-butanediol has two -OH groups on the ends of the carbon chain that are capable of forming hydrogen bonds with neighboring molecules, resulting in a higher boiling point. Because of the presence of intermolecular hydrogen bonding, the molecules have stronger intermolecular forces that require more energy to break, resulting in a higher boiling point.
Therefore, the correct option is C.
Learn more about Boiling point here:
https://brainly.com/question/2153588
#SPJ11
if a sample of the element chemistrium (ch) contain: 100 atoms of ch-12 and 10 atoms of ch-13 (for a total of 110 atoms in the sample), what is the average mass of chemistrium in amu? a 12.1 b 12.3 c 12.5 d 13.1 e 13.3 f 13.5
The average mass of chemistrium (Ch) in amu is: 12.5 amu.
What is chemistrium (Ch)?Chemistrium is an element with the atomic number 106. It is a transactinide synthetic element with an atomic weight of 268 u. Until 2009, this element was known as unnilhexium (Unh). It was named chemistrium in honor of the chemistry in recognition of the Moscow-based Joint Institute for Nuclear Research's contributions to the synthesis of new elements.
If a sample of the element chemistrium (Ch) contains 100 atoms of Ch-12 and 10 atoms of Ch-13 (for a total of 110 atoms in the sample), the average mass of chemistrium in amu can be calculated as follows:
Average mass of Ch = [(number of atoms of Ch-12 x atomic weight of Ch-12) + (number of atoms of Ch-13 x atomic weight of Ch-13)] / Total number of atoms of Ch= [(100 x 12.000000) + (10 x 13.003355)] / 110= [1200.0000 + 130.03355] / 110= 1330.03355 / 110= 12.18212318 amu, which is rounded off to 12.5 amu.
Learn more about element: https://brainly.com/question/25608430
#SPJ11
For each of the following precipitation reactions, calculate how many grams of the first reactant are necessary to completely react with 17.3 g of the second reactant.Part A2KI(aq)+Pb(NO3)2(aq)→PbI2(s)+2KNO3(aq)m = 17.3 gSubmitMy AnswersGive Up
17.264 g of 2KI (potassium iodide) is necessary to completely react with 17.3 g of Pb(NO3)2 in a precipitation reaction.
To calculate the mass of the first reactant required, we will use the mole concept.
Let's first write the balanced chemical equation.
A 2KI(aq) + Pb(NO₃)₂ (aq) → PbI₂(s) + 2KNO₃(aq)
We need to find the number of moles of Pb(NO₃)₂.
To do that, we will use the given mass of Pb(NO₃)₂ and its molar mass.
Molar mass of Pb(NO₃)₂ = 207.2 + 3(14.01) + 6(16) = 331.2 g/mol
Number of moles of Pb(NO₃)₂ = mass / molar mass = 17.3 / 331.2 = 0.052 moles
From the balanced chemical equation, we see that 1 mole of Pb(NO₃)₂ reacts with 2 moles of KI.
Therefore, the number of moles of KI required would be twice the number of moles of Pb(NO₃)₂.
The number of moles of KI required = 2 x 0.052 = 0.104 moles
To calculate the mass of KI required, we will use its molar mass.
The molar mass of KI = 39.10 + 126.90 = 166.0 g/mol
Mass of KI required = a number of moles x molar mass = 0.104 x 166.0 = 17.264 g
Therefore, 17.264 g of KI is required to completely react with 17.3 g of Pb(NO₃)₂.
Learn more about the calculation of grams here:
https://brainly.com/question/28902645
#SPJ11
Consult your laboratory notebook and notes about the color changes you observed during the titration to select the choice that most correctly describes the pH range and color change observed with the phenolphthalein indicator. a. When the indicator was added to the solution, it started out colorless, turned to pink at about pH 9 and was deep purple at the first equivalence point. b. When the indicator was added to the solution, it started out a deep purple, turned to pink at about pH 9 which faded to become colorless at the first equivalence point. c. When the indicator was added to the solution, started out blue, became green during the titration at about pH 5 and turned to yellow at the second equivalence point and beyond. d. When the indicator was added to the solution, it started out yellow, passed through green at about pH 5 and became blue at the second equivalence point and beyond.
Consulting the laboratory notebook and notes about the color changes observed during titration, it is seen that the most accurate option for phenolphthalein is option (a).
When phenolphthalein was added to the solution, it started out colorless, turned to pink at about pH 9, and was deep purple at the first equivalence point.
Phenolphthalein is a pH-sensitive indicator that changes color in the pH range of 8.3 to 10.0. The colorless form of phenolphthalein is present in acidic solutions, whereas the pink form of phenolphthalein is present in basic solutions. The deep purple coloration is representative of the first equivalence point.
The pH of a solution can be determined using an acid-base indicator. Indicators are chemicals that change color in response to changes in acidity. Indicators are typically used to determine the endpoint of an acid-base titration when the pH changes rapidly over a small range of volumes. The color of the indicator corresponds to a specific pH value.
A colorless solution with a low pH will gradually become pink as it approaches the endpoint. As a result, the pH range observed with the phenolphthalein indicator is from about pH 8.3 to 10.0, with a color change from colorless to pink occurring around pH 9.0.
Therefore, "When the indicator was added to the solution, it started out colorless, turned to pink at about pH 9, and was deep purple at the first equivalence point" is the correct answer.
To know more about phenolphthalein, refer here:
https://brainly.com/question/15211751#
#SPJ11
Journal articles can be helpful resources when writing a laboratory report, but it is important to ensure that these references are cited properly. Which components are typically included when citing a journal artide? Select one or more:a. volume or issue number b. author(s)c.name of journal d. commentse. page number(s) f. abstract g. year of publicationh. conclusions
Components that are typically included when citing a journal article are, volume or issue number, author(s), name of journal, page number(s), year of publication are typically included when citing a journal article. The correct choices are a, b, c, d, e.
The abstract, comments, and conclusions may or may not be included depending on the citation style and the specific requirements of the report. When citing a journal article in a laboratory report, it is important to include certain components to provide enough information for the reader to locate the article.
The name of the journal in which the article was published should be included, as well as the volume and issue number (if applicable) and the page numbers of the article within the journal. This information helps to identify the specific article within the publication. The author or authors of the article should also be included, typically in the format of last name followed by initials. The year of publication is also important information to include.
To know more about journal articles, here
brainly.com/question/21114475
#SPJ4
According to the following reaction, how many moles of hydrogen iodide will be formed upon the complete reaction of 0.283 moles of hydrogen gas with excess iodine?hydrogen (g) + iodine (s) → hydrogen iodide (g)
0.566 moles of hydrogen iodide will be formed upon the complete reaction of 0.283 moles of hydrogen gas with excess iodine.
To determine how many moles of hydrogen iodide will be formed, we need to use stoichiometry.
The balanced chemical equation for the given reaction is:-
H₂ (g) + I₂ (s) → 2HI (g)
From the balanced chemical equation, we know that 1 mole of hydrogen reacts with 1 mole of iodine to produce 2 moles of hydrogen iodide.
Since the number of moles of hydrogen is given as 0.283 moles, therefore, the number of moles of iodine required is also 0.283 moles.
Therefore, the number of moles of hydrogen iodide formed = 2 x 0.283 mol= 0.566 mol.
Learn more about moles:
https://brainly.com/question/15356425
#SPJ11
Which of the following are thought to be key requirements for a world to have life?- a source of energy to fuel metabolism- a source of molecules from which to build living cells- a liquid medium
The following are thought to be key requirements for a world to have life: A source of energy to fuel metabolism, A source of molecules from which to build living cells, A liquid medium, These are the primary requirements for a world to have life. These requirements are key to the development and sustainability of life on Earth.
Every living organism requires energy to survive, and this energy comes from a variety of sources, including sunlight, food, or chemical reactions. It's necessary to have a source of energy to fuel metabolism, as it helps with the growth, development, and reproduction of an organism. A source of molecules from which to build living cells
These molecules can include things like amino acids, sugars, and lipids. A liquid medium is essential for life because it provides an environment in which chemical reactions can occur. Most chemical reactions require water to proceed, and water is also the medium in which cells operate. This is why water is considered to be the universal solvent and is an essential component for life on Earth.
Know more about reproduction here:
https://brainly.com/question/11856893
#SPJ11
Which one of the following sets of units is appropriate for a third-order rate constant? s–1 mol L–1s–1 L mol–1s–1 L2 mol–2s–1 L3 mol–3s–1
The appropriate unit for a third-order rate constant is The L² mol-² s-¹. A third-order reaction is a type of chemical reaction where the concentration of each molecular responding determines how quickly the reaction proceeds.
What is rate constant ?A reaction rate constant, or reaction rate coefficient, k, quantifies the rate and direction of a chemical reaction in chemical kinetics. The rate constant, also known as the specific rate constant, is the proportionality constant in the equation expressing the relationship between the rate of a chemical reaction and the concentrations of the reactants.
What is third order reaction?A third-order reaction is a type of chemical reaction where the concentration of each molecular responding determines how quickly the reaction proceeds. Typically, the variation of three concentration factors in this reaction determines the rate.
There may be various cases involved when dealing with a third-order reaction. It might be;
(i) The concentrations of the three reactants are equal.
(ii) Two reactants are present in an equal amount, but one is present in a different amount.
(iii) The concentrations of the three reactants vary or are uneven.
Use formula,
(mol/L)¹⁻ⁿ s⁻¹
To know more about rate constant ,visit ;
brainly.com/question/20305871
#SPJ1
It the figure shown, shaft A, made of AISI 1020 hot-rolled steel, is welded to a fixed support and is subjected to loading by equal and opposite forces F via shaft B. A theoretical stress-concentration factor Kts of 1.6 is induced by the 1/8" fillet. The length of shaft A from the fixed support to the connection at shaft B is 2 ft. The load F cycles from 150 t0 500 lbf.
For shaft A, find the factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach.
The given figure is shown below:
Given figure from which shaft A is made of AISI 1020 hot-rolled steel, is welded to a fixed support and is subjected to loading by equal and opposite forces F via shaft B.
A theoretical stress-concentration factor Kts of 1.6 is induced by the 1/8" fillet. The length of shaft A from the fixed support to the connection at shaft B is 2 ft. The load F cycles from 150 t0 500 lbf. To find:
Factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach for shaft A.
Solution: The factor of safety for infinite life can be given by the following formula:
Factor of safety for infinite life= σ′ut1.5σ′a + σm
Here, σm = (σ1+σ2)/2= (800+400)/2= 600 psi
σa = (σ1-σ2)/2= (800-400)/2= 200 psi
σ′ut = σut/Kf= 64000/1.5 = 42666.67 psi
The alternating stress (σa) can be obtained as follows:
The force F can be given as,F= 150 + 350sin(πn/60) …(i)Where n is the rotational speed in rpm. For the given data, n= 1800 rpm.
Substituting the values, we get,
F= 150 + 350sin(π×1800/60)= 500 lb
Substituting the values of force and cross-sectional area of shaft A, we get,
σa= 4F/πd²= 4×500/π×0.25²= 4080 psi
Thus, substituting the above values in the formula of factor of safety, we get,
Factor of safety for infinite life= σ′ut1.5
σ′a + σm= 42666.67/1.5×4080 + 600= 4.23
Hence, the factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach for shaft A is 4.23.
To learn more about "von mises", visit: https://brainly.com/question/13440986
#SPJ11
what are the equations that relate the partial derivatives of pressure, volume, temperature, and entropy of a simple compressible system called? multiple choice question. gibbs relations helmholtz function maxwell relations clapeyron equation
The equations that relate the partial derivatives of pressure, volume, temperature, and entropy of a simple compressible system are called Maxwell relations.
What are the Maxwell relations?Maxwell's relations or thermodynamic equations of state are the set of equations in thermodynamics that relate partial derivatives of properties of a thermodynamic system to each other. The Maxwell relations arise from the fundamental relations between thermodynamic potentials.The Maxwell relations relate the partial derivatives of thermodynamic properties such as pressure, volume, temperature, and entropy. They are a consequence of the symmetry of the second derivative of the thermodynamic potential.
The four thermodynamic potentials are internal energy, enthalpy, Helmholtz free energy, and Gibbs free energy. The relations are named after James Clerk Maxwell, who presented them as part of his 1871 textbook "Theory of Heat."The Maxwell relations are named after James Clerk Maxwell, a Scottish physicist who first published them in 1871 in his book Theory of Heat. They are applied in thermodynamics to help connect and calculate various thermodynamic properties of a system.
Learn more about Maxwell's relations here: https://brainly.com/question/13944221.
#SPJ11
Determine the pH of each of the following solutions., 3.6×10−2 M HI,9.23×10−2 M HClO4, a solution that is 4.0×10−2 M in HClO4 and 4.8×10−2 M in HCl, a solution that is 1.01% HCl by mass (Assume a density of 1.01 g/mL for the solution.)
A 3.6102 M HI solution has a pH of 1.44. A 9.23102 M HClO4 solution has a pH of 0.036. The mass-based solution with 1.01% HCl has a pH of 2.09 in water.
The concentration of hydrogen ions (H+) in a solution determines the pH, which is a measurement of the solution's acidity or basicity. The pH values of various solutions are measured in the examples provided. Strong acids, HI and HClO4, are present in the first two solutions. Due to its lower pH, HI is a stronger acid than HClO4. The third solution, which comprises a combination of HClO4 and HCl and is weaker than the previous two because of its higher pH level, contains HCl. The pH of the final solution, which contains 1.01% HCl by mass, is 2.09, showing that it is a weak acid.
learn more about solution here:
https://brainly.com/question/30665317
#SPJ4
Which equation represents energy being absorbed as a
bond is broken?
A) H+H + H2 + energy
B) H+H+ energy H2
C) H2 + H+H+ energy
D) H2 + energy + H+H
The reaction demonstrates that energy is needed to dissociate the hydrogen atoms from one another, and as a result energy is consumed.
When a chemical bond is broken, energy is required to break the bond, and thus energy is absorbed. The equation that represents energy being absorbed as a bond is broken is option D, which is:
H2 + energy → 2H
In this equation, the energy is shown as a reactant on the left-hand side of the arrow, indicating that it is required for the reaction to proceed. The H2 molecule on the left-hand side represents a molecule with a covalent bond between two hydrogen atoms. When energy is added to the molecule, the bond between the two hydrogen atoms is broken, and the atoms become separated. This results in the formation of two hydrogen atoms on the right-hand side of the arrow, each with one unpaired electron.
Overall, the reaction shows that energy is required to break the bond between the hydrogen atoms, and thus energy is absorbed during the process.
To learn more about energy refer to:
brainly.com/question/626780
#SPJ4
PLEASE HURRY!!!!!!! Which statements correctly describe the movement of water into and out of the ground?
Choose two correct answers.
Gravity helps move water into the ground.
Mountains help move water out of the ground.
Rocks on Earth’s surface help move water into the ground.
The Sun helps move water into the ground.
The roots of trees help move water out of the ground.
Answer:
Gravity helps move water into the ground.
solution of a monoprotic acid was titrated with NaOH. What does the term monoprotic mean? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a an acid that produces one hydrogen atom b an acid that produces two hydrogen atoms с an acid that produces one proton d an acid that produces two protons
a) an acid that produces one hydrogen atom. Monoprotic acid refers to an acid that donates only one hydrogen ion (H+) in an aqueous solution.
An acid that can only donate one hydrogen ion (H+) in an aqueous solution is referred described as being "monoprotic." This indicates that just one hydrogen ion may be emitted for each acid molecule. In contrast, polyprotic acids are able to contribute a number of hydrogen ions in solution.
Titration of a monoprotic acid solution with NaOH causes the NaOH to react with the acid's H+ ions to produce water and salt. The concentration of the acid may be calculated from the quantity of NaOH needed to fully neutralize the H+ ions in the acid solution.
Acetic acid and hydrochloric acid (HCl) are examples of monoprotic acids (CH3COOH).
learn about Monoprotic here:
https://brainly.com/question/18724098
#SPJ4