why does sudan iii dye turn orange when it detects lipids?

This mixture is not saturated. Considering that CuSO4 has a solubility of 1.38 mol/L, adding 26.4 g of CuSO4 to 250 g of water would provide a concentration of 0.33 mol/L, which is less than CuSO4's solubility.

Concentration is the ability to focus on a single task or activity and block out distractions. It requires the individual to pay attention and commit to a task, ignoring outside influences and irrelevant stimuli.

By developing the ability to concentrate, individuals can enhance their productivity and improve their performance in both academic and professional settings.

Concentration also allows individuals to better engage with material, understand its complexity, and remember the information for longer periods of time. It is a skill that can be developed and improved with practice, as well as by creating a healthy environment to focus in.

This could include limiting distractions, setting aside dedicated times for studying or working, and breaking down complex tasks into smaller, more manageable chunks.

Therefore, With the right strategies and habits, individuals can significantly improve their concentration, and in turn, increase their success.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4

Lactose is a disaccharide. It is composed of the two monosaccharides, glucose and galactose.

The chemical bond between these two sugars is called a glycosidic bond, and it can be broken down by the enzyme lactase in the small intestine, releasing the two individual sugars that can be absorbed into the bloodstream.

Lactose is found primarily in mammalian milk, which makes it a significant source of energy for newborn mammals. Some individuals, however, may have lactose intolerance, a condition where their bodies are unable to produce enough lactase to break down lactose, leading to digestive symptoms after consuming lactose-containing products.

To know more about monosaccharides here

https://brainly.com/question/780562

#SPJ4

The molarity of a solution that contains 30g of Noah in 500ml of solution is 1.5

Molarity is a measure of the concentration of a solute in a solution, expressed as the number of moles per liter of solution (mol/L). It is an important part of chemistry, as it is used to describe the concentration of a solution and its components. When a solute is dissolved in a solvent, the resulting solution has a certain concentration of that solute. Molarity is a measure of this concentration, and it is calculated by dividing the number of moles of solute in the solution by the total volume of the solution. For example, if one mole of a solute is dissolved in one liter of solvent, the resulting solution has a molarity of 1M (1 mole/liter). Molarity is an important concept in chemistry because it can be used to calculate the amount of a solute that is present in a solution, and also to compare the relative concentrations of different solutions. It is also used to describe the reaction rates of solutions, and to determine the amount of reactants and products present in a reaction.

The molarity of a solution is given as-

m = n/v × 1000

Where n is the number of moles of v is the volume of the solution.

The molecular mass of NaOH is 23+16+1=40grams.

Thus the number of moles will be-

30/40 = 3/4

now

m = (3/4)/500 × 1000

m = 1.5

Thus, the molarity of a solution that contains 30g of Noah in 500ml of solution is 1.5.

To learn more about Molarity

https://brainly.com/question/30404105

#SPJ4

Complete question:

What is the molarity of a solution that contains 30g of Noah in 500ml of solution?

The given reaction proceeds faster in the presence of manganese oxide.

catalyst:

A catalyst is a substance that speeds up a reaction without causing a permanent chemical or quantitative change. This is done by lowering the activation energy or going through another reaction pathway.

Activation energy:

The minimum energy above the normal energy that molecules must acquire when they collide to react with each other is known as the activation energy.

This reaction is carried out in the presence of acetanilide. Here, a low activation energy means a fast reaction.

Diploma:

A given reaction will proceed faster in the presence of manganese oxide because the activation energy for the reaction is lower in the presence of manganese oxide than in the presence of acetanilide. 

Learn more about reaction

brainly.com/question/30464598

#SPJ4

Same number of protons and different number of neutrons.

Oxygen is a chemical element with 8 protons. It is capable of achieving a noble gas electronic configuration by accepting two electrons. Oxygen is important for many living organisms.

Oxygen-16 and oxygen-18 differ in the number of neutrons in their nuclei. Oxygen-16 has 8 neutrons, while oxygen-18 has 10 neutrons. Oxygen-16 and oxygen-18 have the same number of protons and electrons. Both neutrons and protons have mass, so changing the number of neutrons changes the mass of oxygen. These elements with different numbers of neutrons are referred to as isotopes. Both oxygen-16 and oxygen-18 are stable isotopes of oxygen and are not radioactive.

To know more about the Oxygen, here

brainly.com/question/2272415

#SPJ4

A chemical equation is a statement using chemical formulas expresses both the identities and the relative quantities of the reactants and products involved in a chemical or physical change. The correct answer is B.

An expression of the identities and relative quantities of the reactants and products involved in a chemical or physical transformation is called a chemical equation. Chemical equations are statements made using chemical formulas.

In chemical equations, variables like the direction of a reaction and the physical states of the reacting parties are represented by symbols. In 1615, the French chemist Jean Beguin created the first chemical equation.

Chemical equations, such as the one below, can be used to depict chemical reactions on paper (for the reaction between hydrogen gas and oxygen gas to form water).

To know more about chemical equations, click the link given below:

brainly.com/question/19626681

#SPJ4

Atomic number is the number of protons in an atom with the symbol Z.

The periodic table is a tabular chart of the chemical elements according to their atomic numbers so that elements with similar properties are in the same group (column).

In a neutral atom, the number of protons is equal to the number of electrons in the atom. However, the number of neutrons can be derived by subtracting the neutron number from the atomic mass.

Hence, the number of protons, electrons and neutrons of phosphorus are as illustrated above.

Learn more about periodic table at: https://brainly.com/question/11155928

#SPJ1

At 1 atm, a sample of gas takes up 250 ml. if the pressure increases to 2 atm while the temperature stays the same, 125ml is the new volume.

The ideal gas law states that PV = nRT, where n is the number of moles of gas, P is the pressure, V is the volume, R is the gas constant, and T is the temperature in Kelvin.

P1V1 = P2V2

where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume.

Substituting the given values, we have:

1 atm x 250 ml = 2 atm x V2

Solving for V2, we get:

V2 = (1 atm x 250 ml) / (2 atm)

V2 = 125 ml

Therefore, the new volume of the gas is 125 ml when the pressure increases from 1 atm to 2 atm while the temperature remains constant.

Learn more about  a gas sample  here:

https://brainly.com/question/29388117

#SPJ4

The concentration of a solution is expressed in terms of molarity. The quantity of moles of solute (the substance dissolved) per liter of solution is known as molarity, often referred to as molar concentration. The concentration of H₂SO₄ is 0.095 M.

M, sometimes known as a molar, stands for molarity. When one gram of solute dissolves in one liter of solution, the solution has a molarity of one. Since the solvent and solute combine to form a solution in a solution, the total volume of the solution is measured.

The balanced chemical equation is:

H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O

Number of moles of NaOH used = Molarity × volume

n = 0.1147 M × 33.09 mL

n = 3.7954 mol

one mole of H₂SO₄ reacts with two moles of NaOH. Therefore,

Number of moles of H₂SO₄ = 3.7954 ÷ 2 = 1.8977 mol

Volume of H₂SO₄ = 20.00 mL

Concentration of H₂SO₄ = Number of moles ÷ volume

C = 1.8977 mol / 20.00 = 0.09488 M

0.09488 M ≈ 0.095 M

To know more about molarity, visit;

https://brainly.com/question/16587536

#SPJ12

The average rate of all 3 experimental run is [tex]2.38 \times 10^{-6} \text { M/s}[/tex] , [tex]3.98 \times 10^{-6} \text { M/s}[/tex] and [tex]6.04 \times 10^{-6} \text { M/s}[/tex].

Run 1st Exp.

The average rate

[tex]\frac{ \text { 0.00125 M} }{ \left ( \text { 8 minutes } \times \text { 60 seconds/minute } \right ) + \text { 45 seconds } } = 2.38 \times 10^{-6} \text { M/s}[/tex]

Run 2nd Exp.

The average rate

[tex]\frac{ \text { 0.00125 M} }{ \left ( \text { 5 minutes } \times \text { 14 seconds/minute } \right ) + \text { 45 seconds } } = 3.98 \times 10^{-6} \text { M/s}[/tex]

Run 3rd Exp.

The average rate

[tex]\frac{ \text { 0.00125 M} }{ \left ( \text { 3 minutes } \times \text { 27 seconds/minute } \right ) + \text { 45 seconds } } = 6.04 \times 10^{-6} \text { M/s}[/tex]

The average rate in chemistry refers to the speed at which a chemical reaction takes place. It is defined as the change in the concentration of a reactant or product over time. The average rate is calculated by dividing the change in concentration by the time elapsed during the reaction.

The average rate can also be used to compare the reaction rates of different chemical reactions. For example, if two reactions have the same change in concentration of a reactant, but one reaction takes twice as long as the other, then the reaction that takes less time will have a higher average rate. It is important to note that the average rate of a reaction can change over time, especially if the reaction involves multiple steps.

To learn more about Average rate visit here:

brainly.com/question/20356688

#SPJ4

The number of moles of helium that contains 3.29 × 1021 atoms is 5.49 × 10-3 moles.

What is helium?

Helium is a colorless, odorless, and tasteless chemical element, and is the second-lightest element in the periodic table. It is a noble gas, meaning it has a very low level of reactivity, and it is found in abundance in the universe. In the atmosphere, helium is the second most abundant element, making up about 24% of the total elemental mass.

The number of moles of helium that contains 3.29 × 1021 atoms can be calculated using Avogadro's number. Avogadro's number is the number of atoms in one mole of a substance, which is equal to 6.02 × 1023 atoms.

Therefore, the calculation is as follows:

Number of moles of helium = 3.29 × 1021 atoms ÷ 6.02 × 1023 atoms/mole = 5.49 × 10-3 moles.

Hence, the number of moles of helium that contains 3.29 × 1021 atoms is 5.49 × 10-3 moles.

To learn more about helium
https://brainly.com/question/29392730

#SPJ4

Malhomme will catch Blonde in a car chase at time 3 hours and distance 468 km.            

The distance travelled divided by the time passed represents an object's average speed. Average velocity can be calculated by dividing the displacement by the time. Velocity is a vector quantity. The average velocity has the following form for the unique case of straight line motion in the x direction:

From the definition, it can be inferred that the units for velocity are metres per second or, more generally, any distance unit over any time unit.

By taking the limit as the time interval gets smaller and smaller, you can get close to an expression for the instantaneous velocity at any point along the path.

At first Blonde has a 24-km lead, so at t = 0  he is at 24 km

and in the rest of the hours we can simply add the velocity.

At

t(hours)     D(Blonde)   D(Malhomme )  

   0                 24                      0

   1                  172                    156

   2                 320                   312

   3                 468                   468

   4                  616                    624

Thus, Malhomme will catch Blonde in a car chase at time 3 hours and distance 468.                  

To learn more about Velocity, here

https://brainly.com/question/18084516

#SPJ1

Au[tex]_2[/tex]O[tex]_3[/tex]  is empirical formula of a compound which consists of 89.14% Au and 10,80% of oxygen.

A compound's empirical equation is defined as both the formula that displays the ratio of substances contained in the compound rather than the actual number of atoms contained in the molecule. Subscripts adjacent towards the element symbols indicate the ratios.

So because subscripts are really the fewest whole integers that reflect the ratio of components, the empirical formula also was called as the simplest formula.

moles of Au = 0.8914 g/ (196.97 g/mol) = 4.5255 x 10⁻³ mols

moles of oxygen= (0.1080 g)/ (16 g/mol) = 6.75 x 10⁻³mols

Simplest whole number ratio

Au = 4.5255 x 10⁻³  /  4.5255 x 10⁻³  moles = 1

O = 6.75 x 10⁻³ mols/  4.5255 x 10⁻³  moles = 1.5

empirical formula= Au[tex]_2[/tex]O[tex]_3[/tex]

Therefore, empirical formula is Au[tex]_2[/tex]O[tex]_3[/tex].

To learn more about empirical formula, here:

https://brainly.com/question/14044066

#SPJ1

When varying the hydroxide ion concentration, it is recommended to use a concentration of 0.1 M for the CV.

This is because a low concentration of CV helps to reduce the effect of the hydroxide ions and maintain a more consistent pH throughout the experiment. Additionally, a low concentration of CV also reduces the amount of time required for the experiment. With the help of spectroscopy and graphical analysis, the rate law for the color-fading reaction between crystal violet and sodium hydroxide will be ascertained in this advanced inquiry lab exercise. The lab starts off with a tutorial on how to build a calibration curve for the absorbance vs concentration of the dye crystal violet. A stock solution of crystal violet is used to create a series of known or standard solutions, and the absorbance of each is measured at the ideal wavelength. In a rate law experiment, the concentration of any "unknown" dye solution can be calculated using a Beer's law plot of absorbance as a function of concentration.

To learn more about hydroxide click here https://brainly.com/question/20701410

#SPJ4

The enthalpy change of the reaction of decane would be -6582.3 kJ/mol of decane.

The enthalpy change of a reaction can be calculated using the following equation:

ΔH = ∑nΔH_f(products) - ∑mΔH_f(reactants)

We are given the standard molar enthalpy of formation of n-decane, C10H22, which is -249.4 kJ/mol.

Using the balanced chemical equation, we can identify the stoichiometric coefficients of the reactants and products:

C10H22(I) + 12.5O2(g) --> 10CO2(g) + 11H2O(g)

Reactants:

n(C10H22) = 1

n(O2) = 12.5

Products:

n(CO2) = 10

n(H2O) = 11

Now we can calculate the enthalpy change of the reaction:

ΔH = ∑nΔH_f(products) - ∑mΔH_f(reactants)

ΔH = [10(-393.5 kJ/mol) + 11(-241.8 kJ/mol)] - [1(-249.4 kJ/mol) + 12.5(0 kJ/mol)]

ΔH = -6582.3 kJ/mol

The enthalpy change of the reaction is -6582.3 kJ/mol of decane.

More on enthalpy change can be found here: https://brainly.com/question/29556033

#SPJ1

Fraction of positively charged histidine side chains at pH 7.4: 0.01. The pKa of histidine's side chain is 6.0,

The pKa of histidine's side chain is 6.0,  which means that at a pH of 6.0, half of the side chains will be positively charged and half will be negatively charged. At a pH of 7.4, which is closer to neutral, fewer side chains will be positively charged. To calculate the fraction of positively charged side chains, we can use the Henderson-Hasselbalch equation, which relates the pH to the pKa and the ratio of protonated to deprotonated species. The result is a very small fraction, indicating that only a small percentage of histidine side chains will be positively charged in physiological conditions.

Learn more about pH here:

https://brainly.com/question/15289741

#SPJ4

7.71×10¹¹g of Sodium Chloride are present in 8 x 10³³ particles. Sodium chloride (NaCl) is indeed an ionic compound.

Sodium chloride (NaCl) is indeed an ionic compound with the chemical name (NaCl), signifying a 1:1 ratio of sodium and chlorine ions. Sodium chloride is the salt chiefly responsible for seawater saltiness and the interstitial matrix of numerous multicellular organisms.

In its edible form, table salt, it is extensively employed as a condiment as well as food preservative. Massive volumes of NaCl are employed in a variety of industrial processes and serve as a primary source of salt and chlorine compounds used as feedstocks in subsequent chemical synthesis.

mole = number of atoms/  6.022×10²³

        =8 x 10³³/ 6.022×10²³

       =1.32×10¹⁰mole

mass =1.32×10¹⁰×58.44

         =7.71×10¹¹g

Therefore, 7.71×10¹¹g of Sodium Chloride are present in 8 x 10³³ particles.

To learn more about sodium chloride, here:

https://brainly.com/question/18069204

#SPJ1

(a) The value of the reaction quotient before any reaction occurs is 0.10 M.

(b) The value of the equilibrium constant for the reaction is 0.38.

The reaction quotient (Q) before any reaction occurs is the ratio of the concentrations of the products raised to their stoichiometric coefficients, to the concentrations of the reactants raised to their stoichiometric coefficients, prior to any reaction taking place.

The reaction between NO2 and N2O4 can be written as:

2NO2(g) ⇌ N2O4(g)

At the start of the reaction, before any reaction occurs, the concentration of NO2 is 0.10 M, and there is no N2O4.

Therefore, the value of Q at this point would be:

Q = (N2O4^2)/(NO2^2)

= 0.10^2 / 0

= 0

The equilibrium constant (Kc) is the value of the reaction quotient at equilibrium, which can be determined from the equilibrium concentrations of reactants and products.

Given that [NO2] = 0.016 M and [N2O4] = 0.042 M, we can calculate the value of Q at equilibrium as:

Q = (0.042^2)/(0.016^2)

= 0.38

So the value of the equilibrium constant, Kc, is equal to the value of the reaction quotient at equilibrium, which is Kc = 0.38.

Learn more about equilibrium constant(Kc) here:

https://brainly.com/question/3159758

#SPJ4

The initial rate of formation of product c is 0.1008 M/s.

The rate of formation of product c in a chemical reaction can be determined by using the rate law. The rate law is an equation that describes the relationship between the rate of the reaction and the concentrations of the reactants involved in the reaction. In this case, the rate law is given as rate = k[a][b], where,

Given the initial concentrations of reactants "a" and "b" are both 0.42 M, and the value of the rate constant, k, is 1.2 x 10^-3 s^-1, we can calculate the initial rate of formation of product "c" as follows:

rate = k[a][b] = (1.2 x 10^-3 s^-1)(0.42 M)(0.42 M)

= 0.1008 M/s.

So the initial rate of formation of product "c" is 0.1008 M/s.

Learn more about the rate law here:

https://brainly.com/question/30461206

The complete question is:

What is the initial rate of formation of product "c" in a reaction where the initial concentrations of reactants "a" and "b" are both 0.42 M, given the rate law: rate = k[a][b], and the value of the rate constant, k, is 1.2 x 10^-3 s^-1?

#SPJ4

In 180mL of D5W, there is a total mass of 9g dextrose part of the treatment of diabetic ketoacidosis is intravenous d5w, a solution of dextrose in water.

To calculate the mass of dextrose in mL of D5W, first determine the concentration of dextrose in the solution.

D5W is a 5% dextrose solution, meaning that each 100mL of D5W contains 5g of dextrose.

Thus, for a given volume of D5W, the mass of b can be determined by multiplying the volubme in mL by 0.05.

For example, in 180mL of D5W, there is a total mass of 9g dextrose (180mL x 0.05 = 9g).

that the pressure of a gas is equal to the number of moles of the gas multiplied by its temperature and the universal gas constant, divided by the volume of the container.  

Learn more about dextrose here:

https://brainly.com/question/17191592

#SPJ4

Refluxing a solvent using a water condenser provides a safer and more controlled environment for a chemical reaction to occur, increasing the chances of a successful outcome.

Refluxing a solvent using a water condenser is necessary because it provides a controlled environment for the reaction to occur. When a reaction mixture is heated in an open flask, the solvent can easily evaporate, causing the reaction to proceed at a different rate than desired or even stop altogether. Additionally, volatile or hazardous compounds can escape into the atmosphere, posing a safety risk.

In a reflux setup, the water condenser acts as a barrier, preventing the solvent from evaporating and also trapping any volatile compounds that may be produced during the reaction. The water flowing through the condenser helps to cool the reaction mixture, preventing it from overheating and potentially causing a dangerous runaway reaction. By controlling the temperature and limiting evaporation, refluxing helps to ensure that the reaction proceeds at a predictable and controlled rate, leading to a higher yield of product.

learn more about refluxing here:

https://brainly.com/question/29484768

#SPJ4

The model could not explain the reason because of which how alpha particles could be deflected at large angles.

Rutherford demonstrate that J.J Thompson's Plum Pudding model was not accurate and did not provide accurate results.

Rutherford made a theory that atoms have their charge concentrated in a very small nucleus.

This was famous Rutherford's Gold Foil Experiment. He actually bombarded thin foil of gold with positive alpha particles which are helium atom particles and it totally consist of two protons and two neutrons.  

Rutherford observed the deflection of alpha particles on the photographic film. It notices that most of alpha particles passed straight through foil.

Learn more Plum pudding model:

brainly.com/question/1510566

#SPJ4

Answer:

The solution density will decrease because the volume is the same but the mass is less

Explanation:

Density=mass÷voulme

pumping air into a tire at a constant temperature increases the pressure  volume of the tire increases slightly as air is pumped in, but this is not the main factor causing the increase in pressure.

Pumping air into a tire at a constant temperature increases the pressure because the number of air molecules in the tire increases, leading to an increase in pressure. The pressure inside a tire is directly proportional to the number of air molecules in the tire, and an increase in the number of air molecules leads to an increase in pressure. The atmospheric pressure does not change significantly in this scenario, and the temperature remains constant. The volume of the tire increases slightly as air is pumped in, but this is not the main factor causing the increase in pressure.

learn more about temperature here:

https://brainly.com/question/11464844

#SPJ4

Answer:

The volume increases.

Explanation:

Answer:

Hex-3-ene of Question no 5

The rate constant is 0.09691 m-1 s-1.

Half-life is defined as the time it takes for a quantity to decrease to half its original value. A second order reaction can be defined as a chemical reaction for which the sum of the exponents of the corresponding rate laws of the chemical reaction is equal to two. A rate constant or specific rate constant is the constant of proportionality in the equation that describes the relationship between the rate of a chemical reaction and the concentration of reacting substances.

secondary half-life

t=1/Kao

Substituting the given values ​​of initial concentration and half-life into equation (1), we get

k = 0.09691 m-1 s-1

The rate constant is 0.09691 m-1 s-1 

Learn more about rate constant

brainly.com/question/15053008

#SPJ4

The goodyear blimp is filled with 5.74 X 10^6 liters of Helium at STP. 256 × 10⁶ moles of helium.

The term mole is defined as the amount of a substance that includes the same number of elementary particles that are ions, molecules, or atoms as the number of atoms present in carbon.

One mole of any substance is equal to the 6.023 x 10²³ particles.

6.023 x 10²³ particles (1 mole) of any gas contains 22.4 Liters at STP. No matter what gas it is. The quantity 22.4 Liters is called the molar volume of a gas.

Therefore,

= 5.74 × 10⁶ liters of Helium 1mole / 22.4 litres

= 0.256 × 10⁶

Thus, The goodyear blimp is filled with 5.74 X 10^6 liters of Helium at STP 256 × 10⁶ moles of helium.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

Water breaking to hydrogen and oxygen is decomposition reaction. Iron and oxygen combining to give iron oxide is a combination reaction or synthesis reaction. Reaction of sodium and chlorine to produce sodium chloride is synthesis reaction.

There are different types of reactions namely, decomposition, displacement, synthesis, combustion etc.  The breaking one compound into its constituents compounds or elements is called decomposition reaction.

Water splitting into hydrogen and oxygen is decomposition reaction. When two elements or molecules combine to form a  single product, it is called combination or synthesis reaction.

Fe and oxygen reacts to form iron oxide is a synthesis reaction. Similarly formation of NaCl and sulphur dioxide from sulphur and oxygen is also a synthesis reaction.

Combination of potassium and chlorine to form potassium chloride is also a synthesis reaction. The breaking of calcium carbonate into calcium oxide and carbon dioxide is a decomposition reaction.

Find more on types of reactions:

https://brainly.com/question/29409694

#SPJ1

Your question probably include the following options:

water → hydrogen + oxygen

*iron + oxygen → iron oxide

*sodium + chlorine → sodium chloride

*sulfur + oxygen → sulfur dioxide

*potassium + chlorine → potassium chloride

*calcium carbonate →calcium oxide + carbon dioxide

According to  Arrhenius equation, the activation energy for a temperature increase from 25°C to 358°C will be 52.4 kJ/mol.

The general rule states that the rate of reaction doubles for a 10° C increase in temperature and this applies only at a certain temperature for a given activation energy .

To establish a connection between the temperature and activation energy for the rule to be valid, we have to ignore any concentration-related temperature variations.

According to the general rule of thumb in organic chemistry, a reaction's pace doubles for every 10° increase in temperature from room temperature. For a given reaction, the ratio of its rate constant at a higher temperature to its rate constant at a lower temperature is known as its temperature coefficient, it is denoted by (Q).

To know more about activation energy here

https://brainly.com/question/30510044

#SPJ4

340 grams of K₂Cr₂O₇ is used, the theoretical yield of potassium would be 78.2 grams.

Potassium can be extracted from potassium dichromate ( K₂Cr₂O₇ ) by reducing it with a metal, such as aluminum or zinc.

K₂Cr₂O₇ + 6Al + 14H⁺ → 2 Cr³⁺ + 3K⁺ + 7 H₂O + 6 Al³⁺

or

K₂Cr₂O₇ + 14H⁺ + 6Zn → 2 Cr³⁺ + 3K⁺ + 7 H₂O + 6 Zn²⁺

The number of grams of potassium that can be extracted from 340 grams of  K₂Cr₂O₇ depends on the stoichiometry of the reaction and the amount of reducing agent used. However, assuming a complete reaction, it is possible to calculate the theoretical yield of potassium.

In this case, one mole of K₂Cr₂O₇ yields 2 moles of potassium ions, so the number of grams of potassium produced can be calculated using the formula:

grams of K = 2 moles K × 39.1 g/mol = 78.2 g

Therefore, if 340 grams of K₂Cr₂O₇ is used, the theoretical yield of potassium would be 78.2 grams.

To know more about potassium dichromate here

https://brainly.com/question/25318439

#SPJ4

--The given question is incorrect, the correct question is

"How many grams of  theoretical yield of Potassium can be extracted from 340 grams of K2Cr2O7?"--