Answer:
1. Why does a magnet exert force on another magnet when the two magnets are not in contact? The magnetic field from north to south increases when they're closer together, and when they repel the repelling force increases as well. This is all due to the magnetic field.
Correct me if I'm wrong, Hope this helps
Favor(Brainliest)
#Carryonlearning
Gwen runs back and forth along a straight track. During the time interval 0≤t≤45 seconds, gwen’s velocity, in feet per second, is modeled by the function v given by v(t)=250sin(t2120)t 6
Gwen's position is a function of his velocity and time
Gwen's position at 45 seconds is 63.9 feet
How to determine Gwen's position at 45 seconds?The function is given as:
v(t) = 250sin(t^2/120)/(t + 6)
When t = 45, we have:
v(45) = 250sin(45^2/120)/(45 + 6)
Evaluate the sum, the exponent and the quotient
v(45) = 250sin(16.875)/(51)
Evaluate the sine ratio
v(45) = 250 * 0.2903/51
Evaluate the product and quotient
v(45) = 1.42
The position is then calculated as:
S(45) = v(45) * 45
This gives
S(45) = 1.42 * 45
Evaluate the product
S(45) = 63.9
Hence, Gwen's position at 45 seconds is 63.9 feet
Read more about velocity function at:
https://brainly.com/question/10962624
The displacement is the shortest between any two given points. The displacement of Gwen at the time period of 45 seconds is 63.9 feet.
What is displacement?The displacement is the shortest between any two given points. It is the product of velocity and time.
Given that the function of the velocity is [tex]v(t)=\dfrac{250\sin\left(\frac{t^{2}}{120}\right)}{\left(t+6\right)}[/tex]. Therefore, substitute the value of t as 45, to know the velocity of Gwen at 45 seconds,
[tex]v(t)=\dfrac{250\sin\left(\frac{t^{2}}{120}\right)}{\left(t+6\right)}[/tex]
[tex]v(45)=\dfrac{250\sin\left(\frac{45^{2}}{120}\right)}{\left(45+6\right)}\\\\v(45) = 1.42[/tex]
Since displacement is the product of velocity and time, therefore, the displacement is equal to,
[tex]s = v \times t\\\\s = 1.42 \times 45\\\\s = 63.9\rm \ feet[/tex]
Hence, the displacement of Gwen at the time period of 45 seconds is 63.9 feet.
Learn more about Displacement:
https://brainly.com/question/11934397
#SPJ4
A 2.0-kilogram ball rolls down a ramp. if the ball accelerates at a rate of 12 m/s2, the net force causing the acceleration is:
a:6 newtons
b:10 newtons
c:12 newtons
d:24 newtons
Answer:
D
Explanation:
f = ma
2 x 12 = 24
answer could differ since it's rolling down a ramp. if an angle is given our approach differs.
what is electric charge?
Answer:
Electric Charge is the property associated with matter due to which it produces and experiences electric and magnetic effect
What happens to the water vapor in the air when the air temperature cools?
Answer:
it becomes a liquid. it becomes water
Use the claim to answer the question.
Claim: Electromagnetic radiation can be described by a wave model or a particle model, depending on the situation.
Is this a scientific claim?
(1 point)
Yes, it can be backed up by experiments and evidence.
No, radiation is invisible, so there is no evidence to back up the claim.
Yes, any statement made by a scientist is a claim.
No, models can't be part of a scientific claim.
Scientific evidence such as reflection and photoelectric effect has proven the wave-particle model of electromagnetic radiation to be true.
What is electromagnet radiation?Electromagnetic radiation is radiation produced as a result of the interactions of the electric and magnetic fields.
Some forms of electromagnetic radiation include:
radio wavesmicrowavesultraviolet radiationvisible lightElectromagnetic radiation can be described using a wave model or a particle model.
The wave property of electromagnetic radiation include:
diffraction reflectionrefractionThe particle property of electromagnetic radiation include:
photoelectric effectCompton effect.Therefore, the wave-particle model of electromagnetic radiation is correct because it can be backed up by experiments and evidence.
Learn more about wave-particle model at: https://brainly.com/question/20452331
Answer:
I just took the identifying Claims Quick check
Explanation:
1. Claim: Electromagnetic radiation can be described by a wave model or a particle model, depending on the situation.
Is this a scientific claim?
Yes, it can be backed up by experiments and evidence.
2. A student states, "The wave model is better than the particle model for electromagnetic radiation because it is easier to understand." Is the student's statement a scientific claim?
No, it isn't because the statement is an opinion.
3. A student wants to make a scientific explanation regarding the wave model of electromagnetic radiation. Which of the following would be part of the scientific explanation?
Claims
4. A student makes this statement before conducting an experiment on electromagnetic radiation: "We expect the laser to diffract when passed through a slit." Which of the following explains why the student's statement is not a claim?
It is a prediction or hypothesis.
5. Which claim do scientists use to describe electromagnetic radiation?
Electromagnetic radiation exhibits properties of both particles and waves.
6. A physician is going to use high-frequency electromagnetic radiation to treat cancer in a patient. Which is a claim about this event?
A wave model is most useful for describing the frequency of the radiation.
Rock layer that must be rich in organic matter that was subjected to heat and pressure over time during the formation of oil and natural gas.
The lowest rock layer is a layer that must be rich in organic matter that was subjected to heat and pressure over time during the formation of oil and gas.
What is the lowest rock layer?The lowest rock layer refers to the lowermost part of the Earth's mantle, which is a thin rock layer (approximately 250 km).
In the Earth, the layers of rocks are progressively deposited, thereby pressing them to the bottom to generate sedimentary rocks.
The lowest rock layers on the bottom must be rich in organic matter to form fossil fuels.
Learn more about rock layers here:
https://brainly.com/question/25846908
What is the velocity of ab 8 kg lead shoot-out if it has 484 j
Answer:
attached image
Explanation:
Hello people ~
what's the value of acceleration due to gravity on earth?
Answer:
9.8 m/s2
Its value is 9.8 m/s2 on Earth. That is to say, the acceleration of gravity on the surface of the earth at sea level is 9.8 m/s2. When discussing the acceleration of gravity, it was mentioned that the value of g is dependent upon location.
what direction can Earth's plates move
The movement of the plates creates three types of tectonic boundaries: convergent, where plates move into one another; divergent, where plates move apart; and transform, where plates move sideways in relation to each other. They move at a rate of one to two inches (three to five centimeters) per year.
After a massive-star supernova, what is left behind?.
Answer: A Nebula is left behind. A spectacular explosion in which a star ejects most of its mass in a violently expanding cloud of debris.
Hope this helps!
What led to Henry Ford’s success as an entrepreneur?
His personal wealth.
His innovative production methods.
His commitment to improving labor laws.
What happens when volcanoes release greenhouse gases into the atmosphere?
The climate gets warmer.
The climate gets cooler.
Winter becomes longer.
Summer becomes longer.
His desire to pay high wages.
What led to Henry Ford’s success as an entrepreneur?
His innovative production methodsWhat happens when volcanoes release greenhouse gases into the atmosphere?
The climate gets warmerThe Earth's biosphere is consists of
A(only the water on Earth that is in its solid form.
B(all of the Earth's water, including surface water, groundwater, snowcover, ice, and water in the atmosphere.
C(the part of the earth and its atmosphere in which living organisms exist or that is capable of supporting life.
D(the solid part of the earth consisting of the crust and outer mantle.
Answer:
The part of the earth and its atmosphere in which living organisms exist or that is capable of supporting life.
Explanation:
It’s in the definition of biosphere. “Bio” means “life,” so “biosphere” is that portion of the Earth capable of supporting life.
Who discovered the basic laws of planetary orbits?.
Answer:
Johannes Kepler
What is the effect of increase in heat on:
1. Plastic
2. Iron
Explanation:
1.Plastic
Thermal Degradation – Plastic materials subjected to prolonged exposure to high temperatures will lose strength and toughness, becoming more prone to cracking, chipping, and breaking, at a rate in proportion to the temperature and time of exposure.
2.Iron
At room temperature, the iron atoms are in an unusual loosely packed open arrangement; as iron is heated past 912 degrees Celsius, the atoms become more closely packed before loosening again at 1,394 degrees Celsius and ultimately melting at 1,538 degrees Celsius
How does a white dwarf compare to our sun as it exists now?.
Answer:
answer down below
Explanation:
it has similar mass but the white dwarf is much denser
How much force would you need to cause a 20-kilogram object to accelerate in a straight line to 20 m/s2?
Answer:
400N
Explanation:
Newton's second law of motion
F = ma
20 x 20 = F
F = 400
Circuit A has a voltage of 10 V, and circuit B has a voltage of 15 V Which statement about the circuits is correct? (1 point)
If the resistance in circuit A equals the resistance in circuit B, then the current in circuit A is greater than the
current in circuit B.
If the resistance in circuit A is greater than the resistance in circuit B, then the current in circuit A is greater
than the current in circuit B.
If the current in circuit A equals the current in circuit B, then the resistance in circuit A equals the resistance
in circuit B
If the current in circuit A is greater than the current in circuit B, then the resistance in circuit A is less than
the resistance in circuit B.
If the current in circuit A is greater than the current in circuit B, then the resistance in circuit A is less than the resistance in circuit B.
Ohms LawOhms law states that the volatge in a circuit is directly proportional to the current flowing in the circuit.
V = IR
Where;
V is voltageI is currentR is resistanceThe given voltage in the circuits
Circuit A = 10 VCircuit B = 15 VAt equal resistance, the current flowing in circuit B will be greater than circuit A since circuit B has more voltage.
However, If the current in circuit A is greater than the current in circuit B, then the resistance in circuit A is less than the resistance in circuit B.
Learn more about ohms law here: https://brainly.com/question/231741
C
- CONNECTIONS
---
much love! <33
List the elements mentioned from hydrogen to iron in the order of their fusing temperature.
Explanation:
H
Hydrogen
-259.14 -252.87 0.00008988 (gas, 273K)
2
He
Helium
-272.20 (under pressure) -268.934 0.0001785 (gas, 273K)
3
Li
Lithium
180.54 1347 0.534
4
Be
Beryllium
1278 2970 1.8477
5
B
Boron
2300 3658 2.34
6
C
Carbon
3527 4827
(sublimes) 2.260 (graphite)
3.513 (diamond)
7
N
Nitrogen
-209.86 -195.8 0.0012506 (gas, 273K)
8
O
Oxygen
-218.4 -182.96 0.001429 (gas, 273K)
9
F
Fluorine
-219.62 -188.14 0.001696 (gas, 273K)
10
Ne
Neon
-248.67 -246.05 0.00089994 (gas, 273K)
11
Na
Sodium
97.81 882.9 0.971
12
Mg
Magnesium
648.8 1090 1.738
13
Al
Aluminum
660.37 2467 2.698
14
Si
Silicon
1410 2355 2.329
15
P
Phosphorus
44.1 (white)
410 (red, under pressure) 280 (white) 1.82 (white)
16
S
Sulfur
113 (α)
119 (b)
106.8 (g) 444.67 2.070 (α)
1.957 (b)
17
Cl
Chlorine
-100.98 -33.97 0.003214 (gas, 273K)
18
Ar
Argon
-189.37 -185.86 0.001784 (gas, 273K)
19
K
Potassium
63.65 774 0.862
20
Ca
Calcium
839 1484 1.55
21
Sc
Scandium
1541 2831 2.989
22
Ti
Titanium
1660 3287 4.54
23
V
Vanadium
1887 3377 6.11 (292 K)
24
Cr
Chromium
1857 2672 7.19
25
Mn
Manganese
1244 1962 7.44
26
Fe
Iron
1535 2750 7.874
27
Co
Cobalt
1495 2870 8.90
28
Ni
Nickel
1453 2732 8.902 (298 K)
29
Cu
Copper
1083.4 2567 8.96
30
Zn
Zinc
419.58 907 7.133
31
Ga
Gallium
The velocity of a car increases by 40 m/s in 80 seconds. What is the
acceleration of the car?
A. 40 m/s2
B. 0.5 m/s2
C. 120 m/s2
D. 0.25 m/s2
Answer:
B
Explanation:
a=v/t
a=(40m/s)÷(80s)
a=0.5m/s
name one type of energy the washing machine wastes when spinning the clothes
Answer:
Electrical Energy
The Electricity Rotates the spinning part of Washing machine and It spinns clothes.
When energy is added to a wave, how can the wave change?.
Answer:
When waves overlap in-phase (crest meets crest or trough meets trough) the waves energy is additive and the amplitude increases.
Explanation:
When waves overlap out-of-phase (crest meets trough) the waves cancel and the amplitude (energy) decreases. When two interfering waves cancel each other out.
A thermoacoustic generator transforms thermal energy into electrical energy. Thermal energy is transferred to a gas by a heat exchanger. The thermal energy causes the gas particles to vibrate rapidly and generate a sound wave. These vibrating gas particles are then used by an alternator to generate electrical energy. The gas used in this kind of generator must be nonreactive to avoid the danger of fire. Using heavier gases increases the amount of electrical energy generated.Which two elements on the table are most likely to be good choices for use as the gas in a thermoacoustic generator?
Answer:
Co2
Explanation:
If two forces act on an object, what is the relationship between the two forces? (pls explain)
A. The larger force causes the same acceleration as the smaller.
B. The larger force causes more acceleration than the smaller.
C. The larger force causes less acceleration than the smaller.
D. The smaller force and the larger force are balanced and therefore causes no acceleration.
Answer:
B. The larger force causes more acceleration than the smaller.
Explanation:
For example, let me use a child and a grown up. The child represents the smaller force while the grown up represents the larger force. If they are pushing the same object of different sides, obviously the side with the grown up will push and move to the side of the child because it is stronger.
Extension Question
If the scale used to measure the mass of the unknown material maxes out at a
lower value than the actual mass of the material, then...
o the measured specific heat will be greater than the actual specific heat.
o the measured specific heat will be less than the actual specific heat.
The measured specific heat will be less than the actual specific heat if a lower value is gotten than the actual mass.
What is Specific heat capacity?This is defined as the quantity of heat needed to raise a substance's temperature by 1 degree Celsius.
If a substance has a low specific heat capacity , it loses water easily which makes the mass when measured to be smaller than the actual value.
Read more about Specific heat capacity here https://brainly.com/question/1401668
What is the period of a wave traveling with a speed of 20 m/s and the wavelength is 4.0 m?
Answer:
0.2s
Explanation:
wave formula
v=(lambda)f
20=(4)f
20÷4
=5Hz
1÷5
T=0.2s
The period of a wave travelling with a speed of 20 m/s and the wavelength is 4.0 m is 0.2 sec.
What is time period?
The length of time it takes a wave to complete one cycle is known as the wave's period. The frequency of the wave must be known in order to compute the wave period. The number of cycles a wave may complete in a period of time—typically one second—is its frequency.
wave formula
v = (lambda)f
20 = (4)f
20÷4
f = 5 Hz
T = 1/f
T = 1÷5
T = 0.2 sec
The period of a wave travelling with a speed of 20 m/s and the wavelength is 4.0 m is 0.2 sec.
To learn more about time refer to the link:
brainly.com/question/13764813
#SPJ2
You are part of a police unit that has found a powder in a suspect's home. You think it might be a new drug called XYZ. XYZ is an ionic compound that dissolves in water. However, what you think might be a drug may just be salt. Unfortunately there seems to be iron fillings and sand mixed in with the white powder. Your job is to isolate the white powder before sending it to the police lab to be tested to determine if it is salt or XYZ. Give step by step directions on exactly how you will separate your mixture of white powder, iron fillings, and sand.
The steps in the separation include;
Use of magnetaddition of water and filtrationEvaporationSeparation techniquesSeparation techniques has to do with how to obtain a substance in the presence of other substances. In this case, we have the substance XYZ mixed with iron filling and sand.
The separation process begins by using a magnet to remove all the iron fillings. Secondly, water is added and the substance XYZ dissolve in water since it is ionic. The sand can be separated form the solution by filtration.
Lastly, the solution is evaporated and the pure XYZ is obtained and sent to the police lab for analysis.
Learn more about separation techniques: https://brainly.com/question/625109
easy one here pls help thanks so much
which thermometer one containing mercury or one containing alcohol, could be used in a polar region where the temperature reaches below -40 degrees?
Calculate the mass (in g) of 346 cm³ of polythene. The density of polythene is 0.95 g/cm³. Give your answer to 2 decimal places.
Answer:
M = 328.70g
Explanation:
From the given values:
V = 346 cm³
M of 1 cm³ of Polythene = 0.95g or 95/100g
Solve:
M = (95×346)
10
= 32870
100
M = 328.70g
meters/second?
A car accelerates from 4 meters/second to 16 meters/second in 4 seconds. The car's acceleration is what meters/second squared
Answer:
the acceleration of the car is 3 m/s².
Explanation: