Answer:
The human retina can only detect incident light that falls in waves 400 to 720 nanometers long, so we can't see microwave or ultraviolet wavelengths. This also applies to infrared lights which has wavelengths longer than visible and shorter than microwaves, thus being invisible to the human eye.
1.
Newton's laws refer to a particle and relate the forces acting on the particle with its acceleration are
(True/False)
Answer:
true
Explanation:
Newton is the measure of the force with turns to be gravity multiplying the mass. Thus, the forces acts on the particles in the direction of the movement of the particles
Below are steps of a work out from warm up steps through the cool down. Place steps in order from 1 being the first thing to do when starting a session to 5 being the last part. Question 1 options: 2 Static stretches held for 10 seconds each stretch to loosen up. 1 Light jog to get heart rate up for about 5 minutes. 4 Activity specific drills such as high knees, butt kicks, skipping, grapevines. 5 15-45 minute exercise or sport activity. 3 Walk to bring heart rate down, followed by stretches held for as long as 30 seconds.
Answer:
1: Light jog to get heart rate up for about 5 minutes
2: Static stretches held for 10 seconds each stretch to loosen up.
3: Activity specific drills such as high knees, butt kicks, skipping, grapevines.
4: 15-45 minute exercise or sport activity.
5: Walk to bring heart rate down, followed by stretches held for as long as 30 seconds.
Warming up and cooling down are essential steps to a good exercise routine. However, it is important to know the correct moment where each of these activities should be performed.
Based on this, we can consider that the correct steps are:
Light jog to get heart rate up for about 5 minutes Static stretches held for 10 seconds each stretch to loosen up. Activity specific drills such as high knees, butt kicks, skipping, grapevines. 15-45 minute exercise or sport activity. Walk to bring heart rate down, followed by stretches held for as long as 30 seconds.With that in mind, we can conceptualize Warming Up and Cooling Down as follows:
Warming Up: Prepares the body for the exercise that will start, allowing the intensity of the exercise to be gradually increased. This allows for good physical stamina and a gradual increase in heart rate.Cooling down: Allows a gradual relaxation, while physical activity loses intensity and the body prepares to stop exercising. In addition, relaxation allows the body to eliminate lactic acid from the musculature, which has accumulated during exercise. This prevents the existence of cramps.Thus, we can conclude that warming up and cooling down is essential for a good physical exercise routine, as it allows for the optimization of exercise and prevents injuries to the body.
You can find more information about this at the link below:
https://brainly.com/question/9700984?referrer=searchResults
https://brainly.com/question/21210671?referrer=searchResults
Ceiling-suspended paddle fans must not be located within a zone measured ____ horizontally and ____ vertically from the top of the bathtub rim or top of a shower stall threshold.
A box with a mass of 15 kg is pushed with a net force of 180 N. What magnitude of
acceleration will the box experience?
Answer:
a = 12 m / s²
Explanation:
Let's apply Newton's second law
F = m a
where F is the force, m the mass of the body and the acceleration
we clear
a = F / m
let's calculate
a = 180/15
a = 12 m / s²
this acceleration has the same direction of the force
A student rolls these four items on the same surface and at the same speed. Which item will have the greatest kinetic energy?
As per the four items given in the question, the speed of each object is the same, then the basketball will have the greatest kinetic energy.
What is kinetic energy?The force which a moving object has is referred to as kinetic energy in physics. It is defined as the number of effort required to propel a person of a specific mass from still to a specific velocity. Aside from slight fluctuations in speed, your body holds onto the kinetic energy it obtains during acceleration.
When the body slows down from its present level to a condition of rest, the exact same quantity of energy is used.
Formally, kinetic energy is any quantity that has a gradient with respect to time in the Lagrangian of a system.
As per the given information in the question,
As per the given items in the question, the basket ball will have the greatest kinetic energy because the kinetic energy is the product of mass and velocity and the mass of the basketball is greater than compared to the other objects.
To know more about Kinetic energy:
https://brainly.com/question/26472013
#SPJ2
Your question is seems incomplete, probably the complete question is:
If a student rolls a marble, basketball, beach ball, and a table tennis ball on the same surface at the same speed, which will have the greatest kinetic energy?
An atom of an element X has one more shell of electrons than an atom of berylium but it has one less valence electron thatn berylium which element is X
Answer:
Sodium
Explanation:
Sodium in period 3 has three electron shells. Recall that the period to which an element belongs shows the number of electron shells present in each atom of the element.
Beryllium is in period two, hence it possesses only two electron shells. However, beryllium is a member of group two hence it has two valence electrons in its outermost shell.
Sodium on the other hand has only one electron in its outermost shell since it is a member of group one. Hence the element must be sodium.
A hair is placed at one edge between two flat glass plates 7.32 cm long. When this arrangement is illuminated with 632 nm light, 130 bands are counted, starting at the point of contact of the two plates. How thick is the hair
Answer:
The thickness of the hair is 4.0764x10^-5 m
Explanation:
2t=mL (L is wavelength)
2t = 129x632 (124 is used because m starts at 0)
2t = 81528
t = 40764
t = 4.0764x10^-5 m
If a phase shift occur, then we use;
2t = (m + 1/2)L and
2t = (129 + 1/2)632
2t = 81844
t = 40922
t = 4.0922x10^-5 m
The answers are almost the same.
1. What are examples of muscle endurance activities/exercises? 2. Which sports require the most muscle endurance? 3. How many sit ups did you do for the Fitnessgram test last year? 4. Pick either arm strength, stomach strength, or leg strength. Explain why this group is important to keep strong.
Answer:
hello i need points i need to pass 8th grade
Explanation:
Answer:1.examples are Plank,Body weight squats,Walking lunges,Pushups 2. Weight-Lifting require the most muscle endurance.3. u shud do it urself .4.u shud pick.
Explanation: for the question Explain why this group is important to keep strong.
Benefits of Muscular Strength and Endurance
Muscular strength and endurance are important for many reasons: Increase your ability to do activities like opening doors, lifting boxes or chopping wood without getting tired. Reduce the risk of injury. Help you keep a healthy body weight.
When the north pole of a magnet is moved towards the center of a loop of wire containing a galvanometer, the needle of the galvanometer flicks to the right. What would also cause the needle on the galvanometer to move to the right?
Answer:
Moving the magnet away from the center of the loop with its south pole facing the center of the loop.
Explanation:
Electromagnetic induction is due to a rapidly changing magnetic field, or loop area. The poles of the magnet induce current in the loop but in the opposite direction, depending on the direction of their relative motion. An approaching north pole will induce an anticlockwise current in the loop, while an approaching south pole will do the reverse. To get the galvanometer to flicker in the same direction as of that when the north pole was approaching, we move the magnet away from the center of the loop with its south pole facing the center of the loop.
A light source radiates 60.0 W of single-wavelength sinusoidal light uniformly in all directions. Find the amplitude of the electric field of this light at a distance of 0.400 m from the bulb
Answer:
E = 149.92 N/C
Explanation:
Given that,
The power emitted by a sinusoidal light is 60 W
Intensity is equal to the power per unit area. It can be given by :
[tex]I=\dfrac{P}{4\pi r^2}\\\\I=\dfrac{60}{4\pi \times (0.4)^2}\\\\I=29.84\ W/m^2[/tex]
The relation between the amplitude of the electric field and the intensity is given by :
[tex]I=\dfrac{E_o^2c \epsilon_o}{2}[/tex]
Here, [tex]E_o[/tex] is the amplitude of the electric field
[tex]E_o=\sqrt{\dfrac{2I}{c\epsilon_o}} \\\\E_o=\sqrt{\dfrac{2\times 29.84}{3\times 10^8\times 8.85\times 10^{-12}}}\\E_o=149.92\ N/C[/tex]
So, the amplitude of the electric field is 149.92 N/C.
The bottle's mass is 0.2 kg. The diameter of its base is 10cm. How much pressure does the bottle exert on the table? A) 64 Pa B) 25 Pa C) 6.4 Pa D) 255 Pa
Answer:
D) 255pa
Explanation:
pressure= force/area
force = weight
weight= mass* gravitational acceleration
weight= 0.2kg*10m/s²
weight= 2N
area= πr² where r=1/2diameter
r=1/2diameter
r=1/2(10cm)
r=5cm or 0.05m
area= πr². where π 's approximate value is 3.14
area=3.14(0.05m)²
area=3.14 * 0.0025m²
area=0.00785m²
pressure= force/area
pressure=2N/0.00785m²
pressure=255pa approximately
Answer:
d 255 Pa
Explanation:
which solid state component allows a mobile phone to store data even if the battery is removed
Answer:
The capacitor helps to store data even after the battery is removed
Explanation:
The cell phone is fitted with different types of capacitors, which come in all shapes and sizes. However they come, their main function is to store charges within them, and dissipate these charges when necessary.
This serves a great purpose in the printed circuit boards of phones as they provide the power needed for data to be stored even when the battery of the phone is removed.
A capacitor is a solid-state device because it has no moving part. It just stores charges within its parallel plates for the phone until the power is needed.
Monochromatic light falls on a screen 1.60 m from two slits separated by 2.11 mm. The first- and second-order bright fringes are separated by 0.550 mm. What is the wavelength of the light?
Answer:
725 x10^-9m
Explanation:
We know that the optical path difference is (ax)/D
Where
a=2.11mm
D=1.60m
x= position on the screen
the optical path differences varies of lambda = wavelength
That is BTW two bright fringes
So therefore
x2-x1=lambda x D/a
lambda = ( x2 - x1) x a/D = 0.55 x 10^-3 x 2.11E-3 / 1.60 = 725nm
A plastic bottle partially filled with water floats on water, even though the density of the plastic (1.2 g/cc) is more than that of water. Why is that?
Answer:
True the plastic will float because of the principle of flotation or buoyancy
Explanation:
Buoyancy explains it all!!
Buoyancy is the upward force/upthrust experienced by a body immersed totally or partially in a liquid.
According to the principle of flotation:
"when a body is totally or partially immersed in liquid it experiences an upthrust which is equal to the volume of fluid displaced"
The plastic will float due to the fact the average density of the total volume of the plastic and the air inside it is less than the same volume of water it is floating in
It takes Serina 0.55 hours to drive to school. Her route is 22 km long. What is Serina’s average speed on her drive to school?
Answer:
= 40 km/hr
Explanation:
speed = distance / time
= 22km / 0.55 hr.
= 40 km/hr
(i) Define free fall.
0
Answer:
uh,Free fall is the motion of a body where its weight is the only force acting on an object.
A car has an acceleration of -5 m/s^2. Describe the car’s motion
Explanation:
because the acceleration is negative, this indicates a deceleration (or slowing down) . Hence we can say that:
The car is decelerating (slowing down), i.e its velocity is decreasing, at a constant rate of 5m/s².
I forgot how to do this ;;;
Explanation:
Acceleration is change in velocity over change in time.
a = Δv / Δt
a = (10 m/s − 5 m/s) / 4 s
a = 1.25 m/s²
Work = force × distance
First, find the distance traveled.
v² = v₀² + 2aΔx
(10 m/s)² = (5 m/s)² + 2 (1.25 m/s²) Δx
Δx = 30 m
Now find the work:
W = (600 kg × 1.25 m/s²) (30 m)
W = 22,500 J
Alternative, work = change in energy.
W = ΔKE
W = ½ mv² − ½ mv₀²
W = ½ m (v² − v₀²)
W = ½ (600 kg) ((10 m/s)² − (5 m/s)²)
W = 22,500 J
A diver is 15m below the surface of a liquid density 1050kg/m3.Calculate the total pressure on the diver given that atmospheric pressure in the region is 70cmHg.(take density of mercury to be 13600kg/m3 and g=10N/kg)
Answer:
Explanation:
pressure due to fluid column = hdg where h is height of column , d is density of fluid , g is acceleration due to gravity .
Total pressure on the diver = atmospheric pressure + pressure due to water
= .70 x 13600 x 10 + 15 x 1050 x 10
= 95200 + 157500
= 252700 Pa
= 2.527 x 10⁵ Pa .
PLEASE HEP FAST PLEASE!!!!! IM SO SCARED!!!! An elevator has the mass of 3 tons of power needed to raise the elevator 50m in 15 s?
Answer:
Mass=3,height=50 and time=15,g=10,P=?
P=mgh/t....which is 3×10×50=1500/15=100Watts
Answer:
[tex]\huge \boxed{\mathrm{100 \ Watts}}[/tex]
Explanation:
[tex]\sf \displaystyle P=\frac{mgh }{t} \\\\\\ P=power \ (W) \\\\ m=mass \ (kg) \\\\ g=gravity \ acceleration \ (m/s^2) \\\\ h=height \ (m) \\\\ t=time \ taken \ (s)[/tex]
[tex]\sf \displaystyle P=\frac{3 \times 10 \times 50 }{15}[/tex]
[tex]\sf \displaystyle P=\frac{1500 }{15}[/tex]
[tex]\sf \displaystyle P=100[/tex]
how far above the surface of the earth do you need for g to be reduced to a third of its value on the surface of the earth?
Answer:
the surface this works out to 9.8 m/s squared.
Please help anyone ASAP You can listen to your friend round a corner, but you cannot watch him/her .Why? Related to sound
Answer:
The sound waves have larger wavelength than light waves. These are diffracted by the corner of wall and light waves cannot do so, due to their very small wavelength (as compared with size of wall corner). So, without seeing the friends his/her voice can be heard.
The sound wave has a longer wavelength as compared to light waves and due to diffraction the sound wave reaches your friend around a corner, but the light wave can't.
What is sound?Sound is a mechanical disturbance that travels through an elastic medium and disrupts an equilibrium condition. It is also feasible to define sound solely subjectively, as that which is perceived by the ear.
Although this definition lacks clarity and is overly pedantic because it is necessary to discuss noises that cannot be heard by the human ear, such as those made by dog whistles or sonar devices.
Compared to light waves, sound waves have a longer wavelength. Since light waves have a very short wavelength, they cannot be diffracted by a corner of a wall (as compared with the size of wall corner). He or she can therefore be heard even when the friends are not seen.
To know more about sound:
https://brainly.com/question/29707602
#SPJ2
Define ratio to show its scientific meaning. Then use it in a
sentence as a noun.
Answer:
Ratio is used as a means of comparison of two or more subjects. It contain two or more digits which gives more information on the number of times an amount of number or times can be derived from the other/others.
An example of a ratio is 5:4 , 2:3 etc.
A ratio is also known as a noun and it can be used in sentences as follows:
The ratio of males to females in the school is five to eight. This can be translated as 5:8 in terms of mathematical expression.
which of the following calculations is equal to 1?
Answer:
we need to see the answers but probably 1 or -1
An automobile travels on a straight road for 55 km at 20 km/h. It then continues in the same direction for another 60 km at 55 km/h. What is the average velocity (km/h) of the car during the full 115 km trip
Given :
Speed of automobile for first 55 km , [tex]v_1=20\ km/h[/tex] .
Speed of automobile for first 60 km , [tex]v_2=55\ km/h[/tex] .
To Find :
Average velocity of the full trip .
Solution :
We know , average velocity is given by :
[tex]v_{avg}=\dfrac{\text{Total distance covered}}{\text{Total time taken }}[/tex]
Now , time is given by :
[tex]T=\dfrac{D}{v}[/tex]
So ,
[tex]v_{avg}=\dfrac{55+60}{\dfrac{55}{20}+\dfrac{60}{55}}\\\\v_{avg}=29.94\ km/h[/tex]
Therefore , the average velocity (km/h) of the car during the full 115 km trip is 29.94 km/h .
Hence , this is the required solution .
A hockey puck moves 26 meters northward, then 12 meters southward, and finally 6 meters northward what is the distance and the displacement? PLEASE HELP MEEE
Answer:
The displacement is 20 m northward.
The distance is 44 m
Explanation:
Let northward motion be in positive direction
Let southward motion be in negative direction
Dispalcement is the shortest path covered by the hockey puck at a specified direction.
The dispalcement of the hockey puck will be calculated as;
Displacement = 26 m northward - 12m southward + 6 m northward
Displacement = 20 m in northward direction
Distance is the total path covered by the hockey puck.
Distance = 26 m + 12m + 6 m
Distance = 44 m
Answer:
The displacement is 20 m northward.
The distance is 44 m
Explanation:
What is the kinetic energy of a ball with a mass of .5 kg and a velocity of 10 m/s
Answer:
kinetic energy is 1/2mv^2.
which is 1/2×5×10^2.
1/2×5×100=
250J.
Answer:
The correct answer would be 250 J.
what is the difference between mass and weight and how they are measured
Answer:
so the differences between both are that the mass is the amount of heaviness in an object or even of you but the weight normally is the mass multiplicated with the gravity of the earth and normally their are measured with this simple formula
M = V . D (mass = volumeby density)
Example
Volume = 3.000 cm³
Density = 3.52 g/cm³
M = 3.000 . 3,52 = 10.560 g
Then you have the weight
To have the result you have to multiplicate the mass and the gravity acceleration
Answer:
Mass is the amount of matter in an object. Mass is often measured in kilograms or grams. The masses of two objects are compared using a balance. Weight is the downward pull on an object due to gravity. Weight is often measured in newtons or pounds, using a spring scale.
Explanation:
Just got it right edg. 2020
The reed switch is placed between the poles of the strong permanent magnet.
State and explain what happens.
Answer:
he switch is open when the magnetic field is activated, a magnetic force is applied to the reed, which causes it to move, closing the circuit and allowing the lock to open.
Explanation:
The reed switches, this is metallic, generally iron, in general the switch is open when the magnetic field is activated, a magnetic force is applied to the reed, which causes it to move, closing the circuit and allowing the lock to open.
The force is given by
F = i l x B
In the systems when the switch is depressed the magnetic field is created in a solenoid and this field attracts the metal of the reed.
1.) Will an objects
motion change if the net
force on the object is
2N? Why or Why not?
Explanation:
Yes, because the object will move to the right
Answer:
Explanation:
Sometimes.
Sometimes not.
If the surface is frictionless, and the mass is 5 kg and the object is on a table, then likely 2 N will be enough to get it going.
If the object is on a table that needs a sandpaper/stain finish, then likely the 5 kg object will not overcome the rough surface of the table and there will likely not be any motion.
If the force is 2N and the object is on a frictionless surface and the object is a 1000kg mass, there might be motion but inertia would certainly be hard to overcome and I doubt there would be motion on planet earth.
2N is just not a very big force.