Answer:
The main cables of the Golden Gate Bridge are made of numerous smaller cables because by combining several thousand in number of smaller cables, each having a diameter which is approximately the diameter of a pencil, into the required cable diameter dimensions, the flexibility, strength, resistance to cracking, rotation resistance, crushing resistance and fatigue resistance of the main cables are increased, and failure of a few strands in a multi-stranded cable is more likely to be detected before catastrophic failure takes place than in a single cable
The properties of strength and flexibility that the cable provides are required so that the bridge can better cushion the seismic turbulence of the water and strong wind energy at the bay of San Francisco, the location of the bridge
Explanation:
Can someone teach me how to find all valid minterms of any given truth table?
Explanation:
A minterm is a product of variables, in which each variable appears exactly once, either complemented or not. When a truth table is represented in a sum of products form, there is one minterm for each line in the table for which the output is True (1).
Suppose I have a truth table as follows, with inputs A, B and output Z.
AB Z
00 1
01 0
10 1
11 0
When I write the minterms, I use a complemented variable where the input is 0, and an uncomplemented variable where the input is 1. The minterm is expressed as a product of those variables.
Here, there are 2 lines in the table with outputs Z=1. The input conditions AB for those outputs are 00 and 10, so the corresponding minterms are A'B' and AB', where the apostrophe indicates the variable is complemented.
This table is then represented by the sum of products ...
Z = A'B' + AB'
You have all of the valid minterms when you have one for each line of the table where the output is 1.
__
Comment on truth table representation
Truth tables can be represented a number of ways. A nice representation for the purpose of identifying minterms is a list of the output for every possible combination of inputs. We have used that form above.
Sometimes, you may see minterms listed as decimal numbers in the range of 0 to 2^n -1 when there are n input variables. Then, the minterms are developed from the binary equivalents of those decimal numbers.
Example:
Logic with 4 input variables has minterms 7, 8, and 15. The binary equivalents of these numbers are 0111, 1000, 1111. The corresponding minterms (for inputs a, b, c, d) are a'bcd + ab'c'd' + abcd = z. Three numbers are listed, so we know we have all of the valid minterms when we have three corresponding minterms.
__
Additional comment
In some cases, outputs will be listed as "don't care." Another set of minterms can be generated for the don't cares. These can be used in the logic minimization process.
Question # 7
Long Text (essay)
In paragraph of 125 words, explain at least three ways that engineers explore possible solutions in their projects
Answer:
To do this, engineers often use a technique called "brainstorming." Brainstorming is a team creativity activity that helps you generate a large number of potential solutions to a problem or challenge.
Engineers use the engineering design process when brainstorming solutions to real-life problems; they develop these solutions by testing and redesigning prototypes that work within given constraints.
Engineers will often use reverse-engineering to solve problems. For example, by taking things apart to determine an issue, finding a solution and then putting the object back together again. Engineers know how things work, and so they constantly analyse things and discover how they work.
Safeguarding personal data and personal wealth from cyberattacks. ...
Addressing climate change through engineering innovation. ...
Feeding the growing world population through cutting-edge bio-engineering and agricultural innovations. ...
Improving health and well-being through life sciences, nanotechnology, and bio engineering.
MARK ME AS BRAINLISTAnswer:
1) Prototyping is the process of experimental testing of samples of design, or model of a product with the possibility of the inclusion of control of parameters in order to determine the workability of a solution.
2) Simulation is the process of creating an imitation of a situation, operation or process which can be used to determine if a particular solution will be able to work as required in the simulated environment of a problem.
3) Calculations are used to find preliminary results of particular situations, their cause and effects based on scientific laws, theories and hypothesis such that the factor of the problem is equated with the available ideas to find the best possible solution.
Explanation:
____________engineers build and test tools and machines, and they rely heavily on computer, math, and problem-solving skills.
Answer:Mechanical Engineers
Explanation: Mechanical engineering is an engineering branch that combines engineering physics and mathematics principles with materials science to design, analyze, manufacture, and maintain mechanical systems. It is one of the oldest and broadest of the engineering branches.
Answer:
what they said. they were correct
Explanation:
PLEASE HELP!! Its easy!!!
Answer:
C is tire
F is cassette
D is hub
Answer: give me brainliest, fellow hamster friend
Explanation:
What is the difference between Material Safety Data Sheets and Safety Data Sheets?
Safety Data Sheets do not include protective measures
Safety Data Sheets do not include health effects
Safety Data Sheets must have 16 user-friendly sections
There are no differences
Answer:
MSDS is Material Safety Data Sheets, whereas SDS just Safety Data Sheets
Explanation:
A: i do not know what answer is
which of the following best describes the mechanical energy of an object?
In other words, an object possesses mechanical energy when it has the ability to do work due to its position or motion. Mechanical energy can take the form of either kinetic energy, which is energy due to an object's motion, or potential energy, which is stored energy due to an object's position.
Some examples of mechanical energy are:
Hydro power plantCyclingWrecking balls, etcWhat is Mechanical Energy?This refers to the type of energy that an object or mass possesses based on its motion and can either be potential or kinetic energy.
Therefore, mechanical energy can be represented mathematically as: [tex]E_{mechanical}[/tex] = U + K
Where U= potential energy
K= kinetic energy
Read more about mechanical energy here:
https://brainly.com/question/24443465
#SPJ2
What is a smooth flow of air over a surface is called?
Answer:
laminar flow
Explanation:
In fluid dynamics, laminar flow is characterized by fluid particles following smooth paths in layers, with each layer moving smoothly past the adjacent layers with little or no mixing.
How much salt will one teaspoon of water dissolve? Complete this experiment to find out!
Materials:
salt
a small glass jar with a lid
water
measuring spoons
Follow these steps:
Carefully measure out 3 Tablespoons of cold water into the jar.
Now measure out 1/8 teaspoon of salt and put it into the jar with the water. Put the lid on the container and shake it. Keep shaking until the salt is completely dissolved. To determine whether it has completely dissolved, hold the container up to the light and look carefully at the bottom, or open the lid and look into it. If you see little grains of salt there, it is not completely dissolved, so keep shaking until it looks the same each time you look.
If the salt does not dissolve completely after five minutes of vigorous shaking, write this in your notebook and go on to step 4. If the salt dissolves completely, add another 1/8 teaspoon of salt and repeat the process. Repeat over and over, keeping track of how many 1/8 teaspoons you add. Stop when you can’t get the salt to dissolve no matter how hard or long you shake the container.
Record how much salt you were able to dissolve in the 3 Tablespoons of water in the solubility data table.
Repeat steps 1-4, but this time using very warm or hot water. Before you do it, run the jar under hot water to warm it up so the water doesn’t cool off right away. Be sure to use the exact same amounts of water and salt as you did the first time. The only variable should be the temperature of the water.
Record your results, and then compare with your previous results.
Answer the following questions:
Were there any differences in the amount of salt that dissolved in the warm water versus the cold water?
Write a conclusion based on your results, using the terms “temperature” and “solubility.”
Based on your results, answer this question: If the oceans of the earth got warmer from global warming, would the water of the oceans become more or less salty? What do you think the effect of this change in the ocean salinity (saltiness) would be on the plants and animals that live in the ocean?
Once you have completed the activity and answered all the questions, turn your assignment in here. To see how this assignment will be graded, click tHow much salt will one teaspoon of water dissolve?
Answer:it took 4 1/8th teaspoons
Explanation:
Answer:
The answer is on the document (not a link and won't break your device, promise).
Explanation:
HELP PLS
Is a book a solid, frame, shell or combination and WHY
4. Tony Hawk weighs about 60 kg. Calculate the difference in the pressure placed on the snow if he was standing in the snow on one snowshoe compared to standing in the snow in one boot. The area of the snowshoe is 0.20 m² and the area of the boot is 0.05 m².
The difference in pressure placed on the snow when Tony Hawk stands on one snowshoe compared to standing in one boot is 800 Pa.
1. Convert the weight of Tony Hawk from kg to N (Newton):
Weight = Mass x Gravity
Given that Tony Hawk weighs about 60 kg and the acceleration due to gravity is approximately 9.8 m/s²,
Weight = 60 kg x 9.8 m/s² = 588 N
2. Calculate the pressure exerted by Tony Hawk on the snow when standing on one snowshoe:
Pressure = Force / Area
Given that the area of the snowshoe is 0.20 m²,
Pressure on snowshoe = 588 N / 0.20 m² = 2940 Pa
3. Calculate the pressure exerted by Tony Hawk on the snow when standing in one boot:
Given that the area of the boot is 0.05 m²,
Pressure on boot = 588 N / 0.05 m² = 11760 Pa
4. Calculate the difference in pressure placed on the snow:
Difference in pressure = Pressure on snowshoe - Pressure on boot
Difference in pressure = 2940 Pa - 11760 Pa = -8820 Pa
Note: The negative sign indicates that the pressure on the snowshoe is lower compared to the pressure on the boot. However, in this context, the absolute value of the difference (8820 Pa) represents the magnitude of the pressure difference.
For more such questions on pressure, click on:
https://brainly.com/question/15176810
#SPJ11
How did Ronald McNair change the face of science?
Answer: Through Physics
Explanation:
He changed the world of science through laser physics, he had a phD in science.
What he really did was amazing where he focused on such tasks as the development of lasers for isotope separation and conducted research on electro-optic modulation for satellite space communications.
He was also a astronaut for the 1986 space module Challenger. Sadly, Challenger exploded due a malfunctioning in the tank, it overheated and killed the entire crew along with Mr.Ronald.
Hope this helps and make sure to thank me!
According to one government agency, bad housekeeping is estimated to cause what percentage
of all slip, trip and fall injuries?
O 35%
O 40%
O 50%
O 65%
O 80%
PLEASE HELP ME!!!!!! 100 POINTS FOR HELPFUL ANSWERS + BRAINLIEST!!!!!
So I do the dishes daily for my chores, and no one in my household rinses their dishes or even scrapes the food into the trash, so it is inevitable that some food will end up down the drain.
In my case since no one else does anything to prevent food from clogging the sink, I am the one blamed for when it gets clogged up. Well my parents got fed up with fixing it so as punishment my parents sent me outside and are making me write an essay on:
How sink drains can get clogged up and meathods to fix them
(this has to be completed before I come back inside).
NOTE: PLEASE DO NOT COPY AND PASTE MY PARENTS WILL CHECK FOR PLAGARISM!!! (ALSO ITS GETTING COLD OUT HERE SO PLEASE HELP!!)
ALSO: PLEASE if you do not have an answer do not answer the question, it takes away the ability for others to help me! if you want to say something put it in the comments below please. ∨
Answer:
well you could get some green goblin it disolves all the c rap in sink
Explanation:
Answer:
I'm sorry this is happening to you I had this happen to me before but, in another scenario. So I will try my best to help you.
Explanation:
You can start by apologizing even tho its not your fault. Then you can go into detail step by step on how u will make sure this wont happen again. If needed you can search up different ways on how to clean a drain. You can use drain clean and if u have one of tho disposable things this might help. You can then ask or tell them very respectfully "It would help me even more I you guys can throw your food in the sink before putting it into the sink. Also, you could do it yourself If necessary, and throw away the food yourself from the sink. Both me and my sister have to do this or we will get yelled out so I completely understand.
Add (6x^2-2x) + (5x-7)
Answer:
6x²+3x-7
Explanation:
Simpify the equation, then u get the ans.
Avionics mechanics, or service technicians, are responsible for which of the following related to aircraft maintenance? (Select all that apply.)
engine
inspecting exterior of plane
landing gear
valves
Answer:
all of them
Explanation:
Because I had this question. :)
Good luck with you assinment.
Which activity is unethical when using a public Internet access terminal? NULL 2
a.
Participate in public online surveys
b.
Offer movie links to friends in other countries
C.
Upload huge video file onto video sharing website
d.
Share personal photos on social networking site
Answer: C
Explanation:
Uploading a huge file on the internet will slow it down alot
During the production of a mobile phone, the manufacturing company stops the assembly line because it has run out of a particular raw material. What kind of waste is this?
A.
transportation
B.
overproduction
C.
over-processing
D.
motion
E.
waiting
Answer:
B. or C.
Explanation:
You have to guess one of them. sry
ASAP correct answer plss When you are driving, if you see this traffic sign it means
A: There is a low place in the road. You should drive slowly and be ready to stop if the low place is
filled with water.
B: The road slopes gently downward and upward ahead. You should continue at the same speed if
the way is clear.
C: There is a downhill section of road ahead. If you are driving a large vehicle you should change
to a lower gear to control your speed.
Answer:
C
Explanation:
The final position of a car can be predicted with the following equation: Position = -2.5 (time) + 25 Where is the car’s position at 3.0 seconds? When would the car reach position 0.0 meters?
Answer:
The car's position at 3.0 seconds is 17.5 meters. The car will reach 0.0 meters at 10 seconds.
Explanation:
You can rewrite the equation as P= -2.5t+25. t=time and P is equal to position; so you will plug in 3.0 seconds into t. The equation will now look like: P = -2.5(3.0)+25
P = -2.5(3.0) + 25
P = -7.5 + 25
P = 17.5 meters
Now, to find when the car reaches 0.0 meters, we will plug that into P since P = position and will solve for t.
P = -2.5t + 25
0.0 = -2.5t + 25
-25 -25
-25 = -2.5t
-25/-2.5 = -2.5t/-2.5
10 = t
So the car will reach 0.0 meters at 10 seconds.
Which of the following sentences are written correctly verbs
Explain the function of a cell wall and name the type of cell that has one ? Worth 50 points plz help need it in less than 30 minutes help plz
Answer:
The cell wall surrounds the plasma membrane of plant cells and provides tensile strength and protection against mechanical and osmotic stress. It also allows cells to develop turgor pressure, which is the pressure of the cell contents against the cell wall.Hope that helps
Explanation:
In the early 1900s, what was developed and used that opened the door for naval use of aircraft?
Answer:
I think its aircraft carrier
Explanation:
In the early 1900s, aircraft carrier was developed and used that opened the door for naval use of aircraft.
What is aircraft carrier?A vessel that acts as a seagoing airbase and has a full-length flight deck as well as spaces for storing, preparing for deployment, and bringing back aircraft is known as an aircraft carrier.
Since then, the number of routes has continuously decreased. Throughout the 1990s, it remained at 12 carriers, and after 9/11, it dropped to 11 in 2007.
Congress authorised a minimum force of 11 carriers in 2011 because of concern that the number of aircraft will decline much further. Ten aircraft carriers from the Nimitz class are active in the US Navy.
A battleship that only serves as a seagoing airbase, equipped with a full-length flight deck with areas for deploying and retrieving aircraft, is called an aircraft carrier.
Thus, the answer is aircraft carrier.
For more details regarding aircraft carrier, visit:
https://brainly.com/question/28119674
#SPJ6
I need help... What is Torque?
Answer:
a twisting force that tends to cause rotation
Explanation:
Answer: a force that causes something to rotate
Explanation:
What is the potential consequence of online impulsive buying?
a.
Better managed monthly budget
b.
Tendency to buy unnecessary goods
C.
Wiser decision making when purchasing
d.
Earned discount vouchers from the store
⚠️I MARK BRAINLIST I AM BRING TIMED PIC INCLUDED⚠️Match the stage of the product development life cycle to the product that best represents it.
building complex systems
car engines employed for more than one model
reusing technology
sophisticated jet airliners
pushing a technology to market
the latest iPhone version
⚠️I MARK BRIANLIST BEING TIMES ⚠️Match the scenario to the stage of the product development life cycle it represents.
An engineer designs a car engine to use for several different
models
testing the concepts
The description of an electric car battery specifies the amount of
time it takes to recharge
reusing technology
A storyboard details a sequence of scenes or experiences
writing engineering requirements
Hope this helps you and others
How many parts (screws and bolts included) does the average car have?
Answer:
Explanation:
30,000 parts
A single car has about 30,000 parts, counting every part down to the smallest screws.
The total number of parts (screws and bolts included) of the average car is around 30,000.
What are the basic parts of the car?The radiator can be described as a heat exchanger used to eliminate heat from the coolant in the cooling system to prevent the vehicle’s engine from overheating. The hot coolant is routed via the radiator, where the coolant exchange heat with the passing air.
The AC Compressor pumps coolant throughout the system and starts the process of the cooling car. The battery saves energy in chemical form so it is released as electricity to run the vehicle’s electrical components.
The front and rear axles are supporting a vehicle where the wheel hubs are attached. Axles are part of the suspension system and are responsible for delivering power to the wheels from the engine via the transmission and differential.
A car’s brakes can be used to stop or slow a vehicle or prevent it from moving when parked or stopped.
Learn more about parts of automobiles, here:
https://brainly.com/question/800372
#SPJ2
can you help me with the engineering
Answer:
maybe depends on what it is about lol
⚠️I MARK BRAINLIST HELP I AM BEING TIMED-included a pic ⚠️The "Big Dig" in Boston, Massachusetts, redesigned the entire highway system in the city, moving roads underground in many areas. The "Big
Dig" could be considered a low-risk project because of the complex engineering and construction challenges.
True
O False
Next
Sub
Save and Exit
Mark this and return

Answer:
False
Explanation:
Just took the test (edge 2021)
The ________________ attraction between the Earth and the moon is ______________ on the side of the Earth that happens to be ____________ the moon, simply because it is ________. This attraction causes the water on this “_________” of Earth to be pulled ___________ the moon.
Answer:
Gravitational; strongest; facing; closer; near side; toward.
Explanation:
The gravitational attraction between the Earth and the moon is strongest on the side of the Earth that happens to be facing the moon, simply because it is closer. This attraction causes the water on this “near side” of Earth to be pulled toward the moon. These forces of attraction and inertia tends to keep the water in place and consequently, leads to a bulge of water on the near side with respect to the moon.
Also, you should note that what is responsible for the moon being in orbit around the Earth is the gravitational force of attraction between the two planetary bodies (Earth and Moon).