Ammonia (NH3) is expected to be more chemically active than water (H2O) because of differences in the electronegativity of the central atoms.
When comparing atoms in the same periodic row, the more electronegative an atom is, the less it will want to donate an electron pair. The electronegativity of nitrogen (N) is higher than that of oxygen (O), making nitrogen less likely to donate an electron pair, and therefore making NH3 more basic than H2O. This is why ammonia is considered to be more chemically active than water.
Electronegativity is a measure of an atom's ability to attract electrons toward itself within a chemical bond. The electronegativity of an atom is determined by its atomic number and electron configuration. The more electronegative an atom is, the greater its ability to attract electrons toward itself.
Find out more about electronegativity
brainly.com/question/29849885
#SPJ4
Which is the limiting reactant when 5. 00 g of h2 and 10. 0 g of o2 react and form water?.
When 5.00 g of H₂ and 10.0 g of O₂ react and form water, the limiting reactant is H₂.
Reagents that are fully consumed during the course of a chemical reaction are known as limiting reagents. They might also be referred to as limiting reactants or agents. The stoichiometry of chemical processes states that a specific number of reactants must be present for the reaction to be completed.
The reaction showing the combination of hydrogen and oxygen to form water is as shown:
2H₂ + O₂ → 2H₂O
The limiting reactant would be hydrogen because it runs out twice as quickly as oxygen.
Because it restricts the reaction rather than allowing it to proceed hypothetically, the limiting reagent or reactant is crucial because it can inform a chemist that only x moles of compounds can occur when the ideal quantity is employed with how much of this substance is used.
To know more about limiting reactant from the link
brainly.com/question/19033878
#SPJ4
Which one of the following corresponds to one mole of a gas at S.T.P.?A. P = 1 atm, T = 273 C, V = 22.4 litreB. P = 1 atm, T = 273 K, V = 22.4 litre C. P = 1 atm, T = 273 K, V = 1 litreD. P = 0.5 atm, T = 273 K, V = 2 litre
The mole is the unit of measurement for the amount of a substance. At standard temperature and pressure (STP), one mole of a gas has a defined volume, pressure, and temperature.
A. P = 1 atm, T = 273 C, V = 22.4 litre: This option is incorrect because the temperature is given in degrees Celsius (273 C) rather than Kelvin (273 K). The temperature should be given in Kelvin for the conditions to be considered STP.
B. P = 1 atm, T = 273 K, V = 22.4 litre: This option is correct. At STP, one mole of a gas has a pressure of 1 atmosphere (atm), a temperature of 273 Kelvin (K), and a volume of 22.4 liters. This volume is known as the molar volume of a gas at STP.
C. P = 1 atm, T = 273 K, V = 1 litre: This option is incorrect because the volume is much smaller than the molar volume of a gas at STP, which is 22.4 liters.
D. P = 0.5 atm, T = 273 K, V = 2 litre: This option is incorrect because both the pressure and volume are not equal to their respective STP values. The pressure at STP is 1 atm and the molar volume is 22.4 liters.
Here you can learn more about standard temperature and pressure (STP)
https://brainly.com/question/7581651#
#SPJ11
Which statement is true for two pieces of iron at the same temperature? Responses Heat flows from the larger object to the smaller object. Heat flows from the larger object to the smaller object. The total kinetic energy of their particles is equal. The total kinetic energy of their particles is equal. Heat flows from the object with higher potential energy to the object with lower potential energy. Heat flows from the object with higher potential energy to the object with lower potential energy. The average kinetic energy of their particles is the same.
The statement is true for two pieces of iron at the same temperature is the average kinetic energy of their particles is the same. Therefore, option D is correct.
What is kinetic energy ?Kinetic energy is the energy of motion, which can be seen as an object or subatomic particle moving. Kinetic energy exists in every moving object and particle.
Kinetic energy is demonstrated by a person walking, a soaring baseball, a crumb falling from a table, and a charged particle in an electric field.
The statement is true for two pieces of iron at the same temperature if their particles have the same average kinetic energy.
Thus, option D is correct.
To learn more about the kinetic energy, follow the link;
https://brainly.com/question/15764612
#SPJ1
Polyester has properties similar to nylon except it is easily broken down by light and concentrated acid.
Select all intermolecular forces that contribute to creating a solution of KBr in H20. lon-dipole London Dispersion H-bonding Dipole-Dipole
The intermolecular forces that contribute to creating a solution of KBr in H20 are London Dispersion, H-bonding, and Dipole-Dipole. London-dipole forces are a type of London Dispersion force.
Intermolecular forces are the attractive and repulsive forces that exist between molecules. These forces are electrostatic in nature and include van der Waals forces, London dispersion forces, hydrogen bonding, and dipole-dipole interactions.
Van der Waals forces are weak and short-range, while London dispersion forces are weak but long-range. Hydrogen bonding is strong and short-range, while dipole-dipole interactions are strong but long-range. These forces are responsible for many of the physical properties of substances, such as boiling point, melting point, and vapor pressure.
Learn more about intermolecular forces
https://brainly.com/question/25902447
#SPJ4
For a fixed amount of gas at a constant temperature, the volume of the gas increases as the pressure decreases.
Yes, this relationship is described by Boyle's Law.
Key points on Boyle's Law:
Boyle's Law states that the volume of a gas is inversely proportional to its pressure, provided that the temperature remains constant.This means that as the pressure of a gas increases, its volume decreases, and vice versa.The law was named after the Irish chemist and physicist Robert Boyle, who first published it in 1662.Boyle's Law is based on experiments in which the volume of a gas was measured at different pressures. It was found that the product of the pressure and volume of the gas remained constant for a given amount of gas at a constant temperature.Mathematically, Boyle's Law can be represented as PV = k, where P is the pressure of the gasV is its volumek is a constant.Boyle's Law has important implications for many real-world applications, including the design of gas storage tanks, the operation of air conditioning and refrigeration systems, and the understanding of atmospheric pressure.
Learn more about Boyle's Law.
https://brainly.com/question/1696010
SPJ4
_____ is the smallest chemical unit of a type of pure substance.
(a) A cell
(b) A molecule
(c) An amino acid
(d) An atom
(e) A proton
magnesium has three naturally occuring isotopes. the masses and bundances of the isotopes are given in the table below. what is the average atomic mass of mg?
According to the question,Average atomic mass of Mg = 24.3050.
What is the mass ?Mass is the measure of the amount of matter in an object. It is related to the concept of weight, which is the measure of the gravitational force that acts on an object. Mass can be measured in a variety of ways, including weighing, using a beam balance, or by using an instrument such as a spring scale. Mass is usually measured in units of kilograms or grams. Mass is an important concept in physics and is one of the properties used to describe an object's motion.
24Mg (78.99%)
25Mg (10.00%)
26Mg (11.01%)
Average atomic mass of Mg = 24.3050
24Mg*(78.99%) + 25Mg*(10.00%) + 26Mg*(11.01%) = 24.3050
To learn more about mass
https://brainly.com/question/837939
#SPJ4
Please answer with a correct answer!!! thank you so much
How many mLs of 4.0 M Sucrose solution and water do you need to make 10 mLs of
a) a 0.9 M and
b) 0.4 M Sucrose solution?
a)We need 2.25 mL of 4.0 M Sucrose solution and 7.75 mL of water to make 10 mL of a 0.9 M Sucrose solution.
b)We need 1 mL of 4.0 M Sucrose solution and 9 mL of water to make 10 mL of a 0.4 M Sucrose solution.
a)To make 10 mL of a 0.9 M Sucrose solution, we need to calculate the amount of 4.0 M Sucrose solution and water required:
Let's call the volume of 4.0 M Sucrose solution used in the solution "x".
Since the concentration of the final solution is 0.9 M, the number of moles of sucrose in the final solution is:
[tex]0.9 M * 10 = 9 * 10^-3[/tex] moles
Since the initial concentration of the sucrose solution is 4.0 M, the number of moles of sucrose in the initial solution is:
[tex]4.0 M * 1 = 4x * 10^-^3[/tex] moles.
Since the number of moles of sucrose must remain constant, we can equate the two:
[tex]9 * 10^-^3 = 4x * 10^-^3[/tex]
x = 2.25 mL
b)Let's call the volume of 4.0 M Sucrose solution used in the solution "y".
Since the concentration of the final solution is 0.4 M, the number of moles of sucrose in the final solution is:
[tex]0.4 M * 10 = 4 x 10^-^3[/tex]
Since the initial concentration of the sucrose solution is 4.0 M, the number of moles of sucrose in the initial solution is:
[tex]4.0 M * y = 4y * 10^-^3[/tex]
Since the number of moles of sucrose must remain constant, we can equate the two:
[tex]4 * 10^-^3 = 4y * 10^-^3[/tex]
y = 1 mL
What is the C1V1 C2V2 formula?
Proportional sets. C1V1=C2V2 is used to calculate an unknown quantity where two solutions/mixtures are proportional
C1V1 = Concentration/amount (start) and Volume (start) C2V2 = Concentration/amount (final) and Volume (final)
What is the dilution formula called?
This process is known as dilution. We can relate the concentrations and volumes before and after a dilution using the following equation: M₁V₁ = M₂V₂ where M₁ and V₁ represent the molarity and volume of the initial concentrated solution and M₂ and V₂ represent the molarity and volume of the final diluted solution.
To know more about the dilution formula:
https://brainly.com/question/7208939
#SPJ1
Which of the following amino acid side chains can form hydrogen bonds with each other, ultimately contributing to tertiary structure? Assume physiological pH. Asn and Val Ala and Pro Phe and Tyr Tyr and Gln Leu and Arg Asp and Ile
The pairs of amino acid side chains that can form hydrogen bonds with each other are: Asn and Gln, Tyr and Phe, and Asp and Glu.
Amino acid side chains can form hydrogen bonds with each other, which ultimately contributes to tertiary structure. Some common examples include:
Asn and Gln: Asn and Gln both contain amide groups (-CONH-) in their side chains, which can participate in hydrogen bonding.
Tyr and Phe: Tyrosine and Phenylalanine both contain aromatic rings in their side chains, which can participate in pi-stacking interactions and hydrogen bonding with other residues.
Asp and Glu: Aspartic acid and Glutamic acid both contain carboxyl groups (-COO-) in their side chains, which can participate in hydrogen bonding.
So, the pairs of amino acid side chains that can form hydrogen bonds with each other are: Asn and Gln, Tyr and Phe, and Asp and Glu.
Learn more about amino acids here:
https://brainly.com/question/28409615
#SPJ4
What is the actual mass of proton and neutron?
the actual mass of proton and neutron The simplest atoms are those of the element hydrogen, which only has atoms with one type of atom.
What exactly does a proton weigh?
The proton is a stable subatomic particle with a rest mass of 1.67262 1027 kg, or 1,836 times its mass of an electron, with a positive charge that is equal to one electron's charge in magnitude.
What exactly does a neutron weigh?
According to the atomic masses unit (u) scale, neutrons get a mass of 1.6749 1027 kg, or 940.6 MeV/c2 in MeV/c2.
To know more atoms about:
https://brainly.com/question/13981855
SPJ4
The actual mass of proton and neutron The simplest atoms are those of the element hydrogen, which only has atoms with one type of atom.
What exactly does a proton weigh?
The proton is a stable subatomic particle with a rest mass of 1.67262 1027 kg, or 1,836 times its mass of an electron, with a positive charge that is equal to one electron's charge in magnitude.
What exactly does a neutron weigh?
According to the atomic masses unit (u) scale, neutrons get a mass of 1.6749 1027 kg, or 940.6 MeV/c2 in MeV/c2.
To know more atoms about:
brainly.com/question/13981855
#SPJ4
What are the uses of magnesium hydroxide?
Magnesium hydroxide is used to treat occasional constipation in children and adults on a short-term basis .
What are compounds ?
A compound is a substance consisting of two or more elements chemically combined in a fixed ratio. They differ from mixtures consisting of two or more substances physically mixed without chemical bonding. Compounds have their own physical and chemical properties that differ from those of individual elements. For example, the compound water (H2O) has different properties (boiling point, density, solubility, etc.) than its components hydrogen (H2) and oxygen (O2 ).
Compounds are formed by chemical reactions in which atoms of different elements combine to form new substances. The formation of a compound can be represented by a chemical formula that indicates the type and number of atoms in the compound.
To know more about compounds , click the link below ;
https://brainly.com/question/26487468
#SPJ4
what mass of cu(no 3 )2 would you need to make 450.0 ml of a 0.750 m solution
The mass of the Cu(NO₃)₂ would we need to make the 450.0 mL of a 0.750 M solution is 61.8 g.
The molarity of the Cu(NO₃)₂ =0.750 M
The volume of the Cu(NO₃)₂ = 450.0 mL = 0.450 L
The molarity expression is as :
Molarity = moles / volume
Moles = molarity × volume
Moles = 0.750 × 0.450
Moles = 0.33 mol
The moles = mass / molar mass
The mass of the Cu(NO₃)₂ = moles × molar mass
The mass of the Cu(NO₃)₂ = 0.33 × 187.5
The mass of the Cu(NO₃)₂ = 61 .8 g
thus, the mass of Cu(NO₃)₂ is 61.8 g.
To learn more about mass here
https://brainly.com/question/22969592
#SPJ4
The molecular weight of ethanol (CH3CH2OH) is
46 and its density is 0.789 g/cm3.
A. What is the molarity of ethanol in beer that is 5%
ethanol by volume? [Alcohol content of beer varies from
about 4% (lite beer) to 8% (stout beer).]
B. The legal limit for a driver’s blood alcohol content
varies, but 80 mg of ethanol per 100 mL of blood (usually
referred to as a blood alcohol level of 0.08) is typical. What
is the molarity of ethanol in a person at this legal limit?
C. How many 12-oz (355-mL) bottles of 5% beer could
a 70-kg person drink and remain under the legal limit? A
70-kg person contains about 40 liters of water. Ignore the
metabolism of ethanol, and assume that the water content
of the person remains constant.
The molecular weight of ethanol (CH3CH2OH) is 46 and its density is 0.789 g/cm3
A. To calculate the molarity of ethanol in beer that is 5% ethanol by volume, we can use the following conversion:
5% ethanol by volume = 5 g ethanol / 100 mL beer
Since the density of ethanol is 0.789 g/cm3, this is equivalent to:
5 g ethanol / 100 mL beer = 5 g ethanol / (0.789 g/mL * 100 mL) = 0.0632 M ethanol
B. To calculate the molarity of ethanol in a person at a blood alcohol level of 0.08, we can use the following conversion:
80 mg ethanol / 100 mL blood = 80 mg ethanol / (0.100 L blood)
Since the molecular weight of ethanol is 46 g/mol, this is equivalent to:
80 mg ethanol / (0.100 L blood) = 80 mg ethanol / (0.100 L) * (1 g / 1000 mg) / (46 g/mol) = 0.0043 M ethanol
C. To calculate how many 12-oz (355-mL) bottles of 5% beer a 70-kg person can drink and remain under the legal limit, we can first calculate the volume of ethanol consumed and then compare it to the volume of blood in the person:
Volume of ethanol in one bottle of beer = 5 g ethanol / 0.0632 M ethanol = 79.2 mL ethanol
Volume of blood in a 70-kg person = 70 kg * 0.06 L/kg = 4.2 L
Total volume of ethanol that a 70-kg person can drink = 4.2 L * 0.0043 M ethanol / 0.0632 M ethanol = 0.48 L = 657.2 mL = 18.5 bottles
Therefore, a 70-kg person can drink 18.5 12-oz (355-mL) bottles of 5% beer and remain under the legal limit.
Learn more about ethanol here:
https://brainly.com/question/25002448
#SPJ4
You can use one-snip test to identify monophyletic groups − meaning that if you cut any branch on a tree, everything that falls off is a monophyletic group. why is this valid?
The one-snip test is a way to identify monophyletic groups in a phylogenetic tree, which is a diagram that shows the evolutionary relationships between species.
A monophyletic group is defined as a group of organisms that share a common ancestor and all of its descendants. When using the one-snip test, a branch is selected and cut, and everything that falls off is considered a monophyletic group. This test is valid because it ensures that all descendants of the cut branch share a common ancestor and are therefore considered a monophyletic group. If the test produces a monophyletic group, it means that the branching pattern in the tree correctly represents the evolutionary relationships between species, and that the group can be considered a clade, or a group of organisms with a shared ancestry.
Learn more about one-snip test:
brainly.com/question/12704015
#SPJ4
which toxic substance is often used to extract gold and results in harmful environmental effects?
Gold is frequently extracted using cyanide, which has harmful impacts on the environment.
One of the most harmful businesses in the world is the gold mining one. Communities may be uprooted, drinking water may become contaminated, and beautiful ecosystems may be destroyed. It endangers human health and ecosystems via cyanide and mercury pollution of water and land.
Because cyanide is so poisonous, its discharge into the environment poses serious threats to both human health and the ecosystem. Cyanide leaks have damaged agricultural fields, caused significant fish deaths, and poisoned drinking water sources.
Additionally, tailings, which are the primary wastes generated during the extraction of gold, are highly contaminated with heavy metals (HM). When these metals come into contact with water or are spread by the wind, they leak out uncontrollably into the environment.
Learn more about cyanide here https://brainly.com/question/6988898
#SPJ4
a solution where no additional solute will dissolve; the solution is at equilibrium between dissolved and undissolved solute.
A solution where no additional solute will dissolve is known as a saturated solution. In this type of solution, an equilibrium exists between the dissolved solute and undissolved solute, meaning that the maximum amount of a given solute has been dissolved into the solvent.
Adding more solute will not change the concentration of the solution; the same amount of solute will remain in solution.
A saturated solution is a type of solution where the maximum amount of a given solute has been dissolved into the solvent. In this type of solution, an equilibrium exists between the dissolved solute and undissolved solute, meaning that no additional solute can be dissolved into the solvent. The amount of solute in the solution remains constant and does not increase, even if more solute is added. This is because the maximum amount of solute that can dissolve in the solvent has already been reached.
Learn more about solutions in equiluibrium:
https://brainly.com/question/30399396
#SPJ4
Rhodium has an fcc crystal structure, an atomic radius of 0. 1345 nm and an atomic weight of 102. 9 g/mol. Calculate the density of rhodium in grams per cubic centimeters.
4.37 g/cm³ is the density of rhodium in grams per cubic centimeters.
What is the atomic weight of rhodium?
The atomic weight of rhodium is 102.9 g/mol. This means that one mole of rhodium atoms has a mass of 102.9 grams. Rhodium is a rare, silvery-white metal that is highly reflective and has a high melting and boiling point. It is often used in catalytic converters, electroplating, and jewelry. The atomic weight of rhodium is an important factor in determining its physical and chemical properties.
To calculate the density of rhodium, we need to divide its atomic weight by its volume. The volume of an fcc crystal can be found by using the formula:
V = a^3/2
where a is the atomic radius. Substituting the values, we get:
V = (0.1345 nm)^3/2 = 2.36 x 10⁻²³ cm³ .
Therefore, the density of rhodium is 102.9 g/mol / 2.36 x 10⁻²³ cm³ = 4.37 g/cm³.
To know more about Rhodium visit:
brainly.com/question/19756190
#SPJ4
What is the average atomic mass of chlorine if it has isotopes of masses 36.96590 and 34.96885, which are 24.47% and 75.53% abundant, respectively?
The average atomic mass of chlorine is 35.0351 amu if it has isotopes of masses 36.96 and 34.96 respectively .
Why does chlorine have an atomic mass of 35.5?Chlorine has a relative atomic mass of 35. 5. The fact that chlorine can be found in two isotopes with atomic masses of 35 and 37 in a ratio of 3:1 makes its relative atomic mass possible. Because of its 35 relative atomic mass, this is the case.
Chlorine's average atomic mass is calculated as follows:average atomic mass = (M1 × 0.2447) + (M2 × 0.7553)
The following equations can be used to replace the masses of the two isotopes:
average atomic mass = (36.96590 × 0.2447) + (34.96885 × 0.7553)
= 8.96857 + 26.06653
= 35.03510 atomic mass units,
Chlorine element :The chemical element chlorine has the atomic number 17 and the symbol Cl. It is the second-lightest halogen and appears in the periodic table between bromine and fluorine. Most of its properties lie in between them. At room temperature, chlorine is a gas that is yellow-green.
Learn more about Average atomic mass :
brainly.com/question/3187640
#SPJ4
A gram of cola contains about 39 grams of sucrose, C₁₂H₂₂O₁₁. How many moles of sucrose does this represent?
Choose matching term
1. 0.11 mol
2. 0.16 mol
3. 0.111 mol
4. 0.12 mol
The moles of 39 grams sucrose (C₁₂H₂₂O₁₁) does represent in a gram of cola is 0.11 moles. The correct answer is 3.
How to determine the mole?Avogadro's number (6.022 x 10²³) of atoms and molecules is used to estimate material concentrations as moles (mol).
Chemical reactions depend on the mole unit and the capacity to transform masses in grams to moles. By dividing the mass in g by the molar mass, which results in the amount in moles, one can determine the number of moles of a substance present in a sample.
Hence,
Sugar molecule mass:
= (12 x 12) + (22 x 1) + (11 x 16)
= 342 gr/mol
Moles of sucrose = mass / molar mass
= 39 / 342
= 0.11 moles
Learn more about moles here: brainly.com/question/30337481
#SPJ4
if the molecular formula of a compound is c4h8, what is the empirical formula for the compound?
CnH2n
In the case of C4H8, because there are 4 carbon atoms and there are 8 hydrogen atoms the general formula must be CnH2n where n can be any number.
Which one of the following is NOT basic?
a) OH-
b) NO3-
c) NH3
d) SO4^-2
e) HPO4 ^-2
And explain why
The one from the following is not the basic is the correct option is b) NO₃⁻.
a) The hydroxide ion (OH⁻) is the strong base and is formed by the loss of the proton by H₂O.
b) The nitrate ion is the conjugate base of the nitric acid (HNO₃). It is formed when the nitric acid loses a proton. The nitric acid is a very strong acid, and its conjugate base is weak base.
c) NH₃ that is Ammonia is the moderately basic with the pH value of the 11.6.
d) SO₄²⁻ this basic in nature.
e) HPO₄⁻ the is basic in nature.
To learn more about base here
https://brainly.com/question/29715742
#SPJ4
defend the assertion that all of life as we know it depends critically on the fact that the angle between the two hydrogen atoms in the water molecule is 104.5 and not 180
The assertion is based on the idea that the molecular geometry of water is important for its unique properties that are essential for life.
Water is a polar molecule, meaning that it has a positive and negative end due to the uneven distribution of electrons. The angle between the two hydrogen atoms in the water molecule contributes to the molecular geometry, which in turn determines the polar nature of the molecule. This polarity is responsible for many of water's unique properties, such as its high heat capacity, its ability to dissolve ionic and polar substances, and its high surface tension.
These properties are essential for life as we know it because they allow cells to regulate their internal environment, transport nutrients and waste, and maintain their shape and integrity. In addition, water's ability to dissolve ionic and polar substances makes it an ideal medium for chemical reactions, which are the basis of cellular metabolism and other biological processes.
In conclusion, the molecular geometry of water, including the angle between the two hydrogen atoms, is critical for the unique properties of water that are essential for life as we know it. If the angle between the hydrogen atoms was 180 degrees, water would have a different molecular geometry, which would result in different properties and potentially make life as we know it impossible.
Learn more about polar molecule here:
https://brainly.com/question/11405437
#SPJ4
trap?Group of answer choicesAnticline.Syncline.Fault.Anticline and fault.Syncline and fault.
A trap is a geological feature that can catch and store oil and gas. In the area of petroleum geology, the phrase "trap" is frequently employed. Because a trap.
is often generated by a mix of anticline and fault structures, the correct response is "Anticline and fault." An anticline is a sort of fold in rock strata that generates a ridge-like structure as it arches higher. A syncline is the inverse, a downward-dipping fold that generates a trough-like shape. A fault is a crack in the earth's crust caused by the movement of two pieces of rock relative to each other. When an anticline meets a fault, it forms a trap by establishing a barrier that can capture and collect material. A trap is a geological feature that can catch and store oil and gas. In the area of petroleum geology, the phrase "trap" is frequently employed. Because a trap.
learn more about syncline here:
https://brainly.com/question/2737818
#SPJ4
What is the formula mass (molar mass) of sucrose (C12H24O8), a fat?
Responses
44 g/mol
280 g/mol
296 g/mol
386 g/mol
The formula mass (molar mass) of sucrose (C12H24O8), a fat is 296 g/mol. Therefore, option C is correct.
What is molar mass ?Molecular weight M is a chemical compound's mass divided by its amount of substance measured in moles. MB = m/nB, where m is the total mass of a pure substance sample and nB is the amount of substance B given in moles.
An element's characteristic molar mass is simply its atomic mass in g/mol. To calculate the molar mass of a compound with multiple atoms, add all the constituent atoms' atomic masses.
The molar mass of sucrose (C12H24O8)
= 12 × 12 + 1 × 24 + 16 × 8
= 144 + 24 + 128
= 296 g/mol
Thus, option C is correct.
To learn more about the molar mass, follow the link;
https://brainly.com/question/12127540
#SPJ1
When 13. 95 ml of hcl of unknown concentration (but less than that of the base) are reacted with 13. 00 ml of 2. 08 m naoh, 1. 51 kj of heat are released. What is the molarity of the hcl solution?.
The solution volume of HCl is 13.91 mL and the volume and concentration of NaOH are 15.00 mL and 3.161 M, respectively. Then the required acid concentration is 3.409 M
HCl and NaOH react, then the reaction can be written as follows:
HCl + NaOH → NaCl + H₂O
Acids and bases are in a 1:1 mole ratio, which means we can use the following formula:
MaVa = MbVb
with:
Ma = molarity of the acid
Va = volume of acid
Mb = base molarity
Vb = base volume
So, to calculate the molarity of HCl is:
Ma = MbVb/Va
Ma = (3.161)(15.00)/ 13.91
Ma = 3.409 M
Learn more about the formula of acid concentration at https://brainly.com/question/16911101
#SPJ4
the prescribing clinician orders aluminum hydroxide 20 ml po qid. the pharmacy sends aluminum hydroxide, 320 mg per 5 ml. how many mg will the patient receive per dose? mg. round to the nearest whole number if rounding needed. do not include unit of measurement in the answer.
Given that 2.4g is ordered and the accessible medication has 400 mg/5ml, the nurse should give 30ml of the medication.
Magnesium hydroxide sometimes referred to as Milk of Magnesia, is a magnesium salt that is frequently utilized in medical settings. Magnesium hydroxide is frequently used as an antacid to neutralize stomach acids and prevent indigestion and heartburn because it is mildly basic and non-toxic. Additionally, it has medical applications as a laxative, antiperspirant, sore therapy agent, and wastewater treatment. dosage recommended = 2.4 grams. You can get milligrams out of this by multiplying by 1000: The recommended dosage is (2.4 1000) mg. Dosage prescribed: 2400 mg The dosage of the drug is 400 mg/5 ml. Magnesium hydroxide is 400 mg available. Divide the available amount by 2400mg of magnesium hydroxide to get how many doses are required. The dosage is 2400 mg, 400 mg, and 5 ml. Size: 30 ml.
Learn more about Antacid here:
https://brainly.com/question/28590854
#SPJ4
The order in which amino acids are linked in peptides is given
a. from the C-terminal to the N-terminal end
b. from the N-terminal to the C-terminal end
c. in alphabetical order
d. in order of increasing molecular weights of the amino acid residues
Option b. from the N-terminal to the C-terminal end. A peptide is a molecule composed of two or more amino acids linked by peptide bonds.
The order in which these amino acids are linked together determines the sequence of the peptide. The amino acid at one end of the peptide is referred to as the N-terminal (amino) end, and the amino acid at the other end is referred to as the C-terminal (carboxyl) end. When a peptide is synthesized, the amino acids are added to the molecule one by one, starting from the N-terminal end and proceeding toward the C-terminal end. This means that the sequence of amino acids in a peptide is from the N-terminal end to the C-terminal end. This information is critical for understanding the structure and function of peptides, proteins, and enzymes.
Learn more about amino acids here:
https://brainly.com/question/21260687
#SPJ4
Determine the enthalpy for this reaction:
Ca(OH)2(s)+CO2(g)→CaCO3(s)+H2O(l)
Substance ΔHf∘ (kJ/mol)
CO2(g) −393. 5
Ca(OH)2(s) −986. 1
H2O(l) −285. 8
CaCO3(s) −1207. 0
H2O(g) −241. 8
The standard enthalpy change (ΔHf∘) for the reaction of calcium hydroxide with carbon dioxide to form calcium carbonate and water is −171.3 kJ/mol.
The enthalpy change (ΔH) for a reaction can be calculated using the standard enthalpy of formation (ΔHf∘) of the reactants and products.
The equation for the reaction is:
Ca(OH)2(s) + CO2(g) → CaCO3(s) + H2O(l)
The standard enthalpy change (ΔHf∘) for this reaction can be calculated as follows:
ΔHf∘ = ΔHf∘ (CaCO3) + ΔHf∘ (H2O) − ΔHf∘ (Ca(OH)2) − ΔHf∘ (CO2)
Plugging in the values from the table,
ΔHf∘ = −1207.0 kJ/mol + −285.8 kJ/mol − (−986.1 kJ/mol) − (−393.5 kJ/mol)
= −171.3 kJ/mol
Therefore, the standard enthalpy change (ΔHf∘) for the reaction of calcium hydroxide with carbon dioxide to form calcium carbonate and water is −171.3 kJ/mol.
To learn more about enthalpy change:
https://brainly.com/question/16387742
#SPJ4