Which type of electricity is a one-time event, caused by unbalanced charges trying to become neutral again?

Answers

Answer 1

Answer: yes

Explanation:


Related Questions

A student at a polymer lab conducted a stress-relaxation experiment on a polymer, whose material response can be modeled by the Maxwell model. In the experiment, a 10-cm-long bar was stretched instantly until the stress reached 200 MPa. After 2 min, the measured stress in the bar was 160 MPa. a) Calculate the relaxation time constant of the polymer. b) If the initial stress was reached by stretching the bar by 16 mm, what is the viscosity of the dashpot in the Maxwell model

Answers

Answer: add 10 cm plus 200 mpa divided by 2 min then caculate that into 160 bars.

Explanation:

a) The relaxation time constant of the polymer is approximately 8.9 min.

b) The viscosity of the dashpot in the Maxwell model is approximately 4.55 GPa s.

What is the stress-relaxation model?

The stress-relaxation response of the Maxwell model can be modeled by the following equation:

σ(t) = σ₀ exp(-t/τ)

where σ₀ is the initial stress, τ is the relaxation time constant, and t is the time.

a) The relaxation time constant of the polymer:

σ(2 min) = 160 MPa

σ₀ = 200 MPa

160 MPa = 200 MPa exp(-2 min/τ)

Taking the natural logarithm of both sides, we get:

ln(160/200) = -2 min/τ

Solving for τ, we get:

τ = -2 min / ln(160/200) ≈ 8.9 min

Therefore, the relaxation time constant of the polymer is approximately 8.9 min.

b) The displacement of the spring in the Maxwell model can be modeled by the following equation:

x(t) = (σ₀ / G) (1 - exp(-t/τ))

where G is the shear modulus of the polymer. We can use this equation and the given displacement of 16 mm to find the viscosity of the dashpot:

x(t) = 16 mm = 0.016 m

σ₀ = 200 MPa

τ = 6.09 min = 365.4 s

Assume that the shear modulus of the polymer is constant and use the given stress to find it:

G = σ₀ / γ

where γ is the strain induced by the stretching.

Since the bar was stretched by 16 mm and its original length was 10 cm (i.e., 100 mm), the strain is:

γ = 16 mm / 100 mm = 0.16

Therefore,

G = 200 MPa / 0.16 = 1250 MPa

Now we can solve for the viscosity of the dashpot:

η = σ₀τ / x(t)

= (200 MPa) (365.4 s) / (0.016 m)

≈ 4.55 GPa s

Therefore, the viscosity of the dashpot in the Maxwell model is approximately 4.55 GPa s.

Learn more about the stress-relaxation model here:

https://brainly.com/question/30558828

#SPJ2

a race car goes around a circular track of radius 150 m at speed of 10.0 m/s. How long does it take to complete one lap?

Answers

Answer:

94.25 seconds

Explanation:

Solve for period (T) using: v=(2*pi*r)/T

rearrange: vT=2*pi*r

rearrange: T=(2*pi*r)/v

Plug in values.

T=(2*pi*150)/10

T=94.25 seconds

If a race car goes around a circular track of a radius of 150 m at speed of 10.0 m/s ,then the time taken to complete the one lap would be 94.25 seconds.

What is speed?

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object. The unit of speed is a meter/second. The generally considered unit for speed is a meter per second.

As given in the problem a race car goes around a circular track of radius 150 m at speed of 10.0 m/s.

vT = 2 × π × r

T = (2 × π × r)/ v

T = (2 × π× 150)/10

T = 94.25 seconds

Thus, the time taken to complete the one lap would be 94.25 seconds.

To learn more about speed here, refer to the link given below ;

https://brainly.com/question/7359669

#SPJ2

is electricity matter

Answers

Answer:

Yes it is

Explanation:

Electricity is the positive and negative matter that's found in protons and electrons.

Answer:

yes

Explanation:

because electricity is a positive and negative proton

An amusement park ride called the Rotor debuted in 1955 in Germany. Passengers stand in the cylindrical drum of the Rotor as it rotates around its axis. Once the Rotor reaches its operating speed, the floor drops but the riders remain pinned against the wall of the cylinder. Suppose the cylinder makes 26.0 rev/min and has a radius of 3.70 m. 1) What is the coefficient of static friction between the wall of the cylinder and the backs of the riders

Answers

Answer:

μs = 0.36

Explanation:

While the drum is rotating, the riders, in order to keep in a circular movement, are accelerated towards the center of the drum.This acceleration is produced by the centripetal force.Now, this force is not a different type of force, is the net force acting on the riders in this direction.Since the riders have their backs against the wall, and the normal force between the riders and the wall is perpendicular to the wall and aiming out of it, it is easily seen that this normal force is the same centripetal force.In the vertical direction, we have two forces acting on the riders: the force of gravity (which we call weight) downward, and the friction force, that will oppose to the relative movement between the riders and the wall, going upward.When this force be equal to the weight, it will have the maximum possible value, which can be written as follows:

       [tex]F_{frmax} = \mu_{s}* F_{n} = m * g (1)[/tex]

where μs= coefficient of static friction (our unknown)As  we have already said Fn = Fc.The value of the centripetal force, is related with the angular velocity ω and the radius of the drum r, as follows:

      [tex]F_{n} = m* \omega^{2} * r (2)[/tex]

Replacing (2) in (1), simplifying and rearranging terms, we can solve for μs, as follows:

       [tex]\mu_{s} = \frac{g}{\omega^{2} r} (3)[/tex]

Prior to replace ω for its value, is convenient to convert it from rev/min to rad/sec, as follows:

       [tex]\omega = 26.0 \frac{rev}{min} * \frac{1min}{60 sec} *\frac{2*\pi rad }{1 rev} = 2.72 rad/sec (4)[/tex]

Replacing g, ω and r in (3):[tex]\mu_{s} = \frac{g}{\omega^{2} r} = \frac{9.8m/s2}{(2.72rad/sec)^{2} *3.7 m} = 0.36 (5)[/tex]

Explain why the same side of the moon is always facing Earth.

Answers

Answer:

The moon keeps the same face pointing towards the Earth because its rate of spin is tidally locked so that it is synchronized with its rate of revolution (the time needed to complete one orbit). In other words, the moon rotates exactly once every time it circles the Earth.

the motion of a body with respect to another body is? ​

Answers

Answer:

Motion that changes the orientation of a body is called rotation. ... In both cases all points in the body have the same velocity (directed speed) and the same acceleration (time rate of change of velocity).

Answer:

its called relative speed

in a class where the number of girls is 36% of the total number,there are 48 boys.how many students are there in the class?​

Answers

Answer:

There are 75 people in the class. The number of boys is 48 and the number of girls is 27. The percentage of girls is 36% of 75.

Explanation:

How did Einstein’s and Newton’s theories differ in terms of explaining the cause of gravity?
thank you

Answers

Answer:

Newton's theory identified mass as the factor that causes gravity. On the other hand, Einstein's theory identified the curvature of space-time as the factor that causes gravity.

Answer:

Hey mate...

Explanation:

This is ur answer....

In the 17th century Newton concluded that objects fall because they are pulled by Earth's gravity. Einstein's interpretation was that these objects do not fall. According to Einstein, these objects and Earth just freely move in a curved spacetime and this curvature is induced by mass and energy of these objects.

Hope it helps you,

mark me as the brainliest.....

Pls answer my 2 recent questions by going on my account...

Follow me!

NEED HELP ASAP TEST IS DUE TMR

What is the angular displacement of a wheel with a 3mm radius and an angular speed of 6 rad/s over a time period of 2.5 seconds?

Answers

Answer:

The answer should be uranus

Explanation:

During a blood transfusion, gravity is used to provide the pressure to overcome the blood pressure and force the flow through a small needle into a vein. Consider a case where the needle is 3.0 cm long and has an internal diameter of 0.75 mm. If the required rate of flow is 0.03 cm3/s and the blood pressure in the vein is 11.00 kPa higher than atmospheric pressure (Pa), how high should the bottle be placed above the needle

Answers

Density of blood = 1.06x10³

Viscosity = 4 mpas

Answer:

It should be 1.10 higher

Explanation:

L = 0.93

D = 0.75

R = 0.75/2 = 0.375

Q = 0.03x10^-3

Blood pressure = 11x10³

Pn = 4x10^-3

n = 4 x 10^-3

Density of blood = 1.06x10³

Pn - Pv = 8*Q*n*L/pi*r⁴

Pn - pv = 463.57pa

Pn - pv = 463.57pa

Make pn subject

Pn = Pv + 463.57pa ----1

Vn = Q/An

= 0.0679m/s

To get height above needle

Pn + 1/2pv²n = Pa + pgh ----2

We equate 1 and 2 together

We get

Pgh = 11466

To get h we divide through by pg

h = 11466/pg

h = 11466/(1.06x10³)x9.81

h = 1.1026

Approximately

Height = 1.1 meters

So it should be 1.10 meters higher

the full calculations are in the attachment.

thank you!

You are an astronaut and NASA has asked you to determine how mass and weight change throughout the solar system they have provided you with a rover with a mass of 227 kg on earth what is the rovers mass on the moon if the moon's gravity is 1.60 ms²

Answers

Answer:

The mass will be 227kg.

Explanation:

Mass is a measure of how much "stuff" is in an object. It's a measure of the number and type of atoms in something, and is fixed. If you and I went to the moon right now, our bodies wouldn't change what they were made of. I would still be made up of all the same "stuff," as would you! So my mass would be the same and so would yours.

Weight would change on the moon, because weight is a measure of the local pull of gravity on an object's mass. Earth's gravitational force is about 10m/s2 and the moon's is about 1.6m/s2. So on the moon, I would have a weight of about 1/6 my weight on Earth... but I'd still wear the same size jeans!

Is TV light is converging rays, divergent rays or parallel rays?

Answers

I believe parallel rays

You wish to make a simple amusement park ride in which a steel-wheeled roller-coaster car travels down one long slope, where rolling friction is negligible, and later slows to a stop through kinetic friction between the roller coaster's locked wheels sliding along a horizontal plastic (polystyrene) track. Assume the roller-coaster car (filled with passengers) has a mass of 743.0 kg and starts 83.4 m above the ground. (a) Calculate how fast the car is going when it reaches the bottom of the hill. m/s (b) How much does the thermal energy of the system change during the stopping motion of the car

Answers

Answer:

(a) The car is going approximately 40.43 m/s at the bottom of the hill

(b) The thermal energy will increase by 607,268.76 J

Explanation:

In the question, we have;

The height of the roller coaster above ground = 83.4 m

The mass of the roller coaster, m = 743.0 kg

(a) By the conservation of energy principle, we have;

The potential energy at the top of the hill, P.E., is equal to the kinetic energy at the bottom of the hill, K.E.

∴ P.E. = K.E.

P.E. = m·g·h

Where;

m = The mass of the roller coaster = 743.0 kg

g = The acceleration due to gravity = 9.8 m/s²

h = The height of the roller coaster = 83.4 m

Therefore, we have;

P.E. = 743.0 kg × 9.8 m/s² × 83.4 m = 607,268.76 J

P.E. = 607,268.76 J

K.E. = 1/2·m·v²

∴ K.E. = 1/2 × 743.0 kg × v²

P.E. = K.E.

∴ P.E. = K.E. = 607,268.76 J

1/2 × 743.0 kg × v² = 607,268.76 J

v² = 607,268.76 J/(1/2 × 743.0 kg) = 1,634.64 m²/s²

v = √(1,634.64 m²/s²) ≈ 40.43 m/s

(b) Given that the material wheel moves along polystyrene track, the sound released will be minimal and almost all the kinetic energy will be converted to heat energy when the train stops, therefore, the thermal energy will increase by K.E. = 607,268.76 J

The thermal energy change of the system is 624,492 J.

We know that in the roller coaster, there is an energy transformation from gravitational potential energy to kinetic energy. As such we can write;

mgh = 1/2mv^2

Where we cancel out the mass from both sides, we are left with;

gh=0.5v^2

v= √gh/0.5

v = √10 × 83.4 m/0.5

v = 41 ms-1

Now the kinetic energy is converted also into heat energy hence;

Thermal energy change of the system = 1/2 mv^2 = 0.5 × 743.0 kg × ( 41 ms-1)^2 = 624,492 J

Learn more about energy: https://brainly.com/question/1195122

Name the principle which states that energy
cannot be created or destroyed, merely
transferred from one form to another:​

Answers

Law of Conservation of Energy

Answer:

the Laws of Thermodynamics

Explanation:

these laws states that no form of energy can be created by anyone or anything, without a previous and equal input of energy being put in, that energy can only be transferred from object to object and through different forms

Example: the way a heater runs to warm up an area, that is the process of electrical energy, or energy stored in propane being converted into heat energy

this law is universally implied and has been proven on multiple accounts to be true, in no way can you create energy out of thin air, all you can do is transform and transfer it

hope this is what you was going for, very good point in science

this is one of two correct answers, the other answer to this question is also correct

A 0.242 g sample of potassium is heated in oxygen. The result is 0.292 g of a crystalline compound. What is the formula of this compound?

A.
KO3

B.
KO2

C.
KO

D.
K2O

Answers

Answer:

Hello there Dude answer is B :D hope it helped mark me brainliest.

The formula of the compound formed has been  [tex]\rm \bold {K_2O}[/tex]. Thus, option D is correct.

The sample of potassium has mass of 0.242 g. Since, the substance has been heated in the presence of oxygen, the gain in the weight has been corresponds with the mass of oxygen.

The given sample has:

Mass of potassium, [tex]m_K=0.242\;\text g[/tex]

Mass of heated sample, [tex]m_S=0.292\;\text g[/tex]

The mass of oxygen ([tex]m_O[/tex])  in the sample has been given as:

[tex]m_O=m_S-m_K[/tex]

Substituting the values:

[tex]m_O=0.292\;-\;0.242\;\text g\\m_O=0.05\;\text g[/tex]

The mass of oxygen in the sample has been 0.05 g.

The moles (M) of compounds in the sample has been given as:

[tex]M=\dfrac{m}{mwt}[/tex]

Where, m has been the mass of the compound, and

mwt has been the molecular weight of the compound.

The moles of potassium ([tex]M_K[/tex]) has been given as:

[tex]M_K=\dfrac{0.242}{39.098}\\M_K=0.006\;\text mol[/tex]

The moles of oxygen ([tex]M_O[/tex]) has been given as:

[tex]M_O=\dfrac{0.05}{16}\\M_O=0.003\;\text mol[/tex]

The molecular compound has been formed with Potassium and oxygen in the ratio of their moles as:

[tex]\rm \dfrac{K}{O}=\dfrac{0.006}{0.003}\\ \dfrac{K}{O}= \dfrac{2}1}[/tex]

Thus, the molecular formula of the compound has been [tex]\rm \bold {K_2O}[/tex]. Thus, option D is correct.

For more information about molecular formula, refer to the link:

https://brainly.com/question/1247523

Which of the following is an example of an object with kinetic energy?
a. a plane lifting off of the runway
b. a bobsled perched at the top of a run
c. a snowball tumbling down a hill
d. both a and c

Answers

Answer:

A and C

Explanation:

Both have mass and are in motion

D is ur answer it should be right

Which of these statements is true about the effect of a force exerted upon an object?
A. A large force always produces a large change in the object’s momentum.
B. A small force always produces a large change in the object’s momentum.
C. A small force applied over a long time interval can produce a large change in the object’s momentum.
D. A large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.

Answers

Answer:

D. A large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.

Explanation:

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

[tex] Momentum = mass * velocity [/tex]

Also, the impulse of an object is given by the formula;

[tex] Impulse = force * time [/tex]

In accordance with the impulse-momentum theorem, the statement which is true about the effect of a force exerted upon an object is that a large force produces a large change in the object’s momentum only if the force is applied over a very short time interval.

g Design an experiment you can use to determine the mass of the metal cylinder. When you explain your experiment, be sure to mention: What is the underlying model (equation) that you can use to determine the mass from your measurements

Answers

Answer:

m = [tex]\frac{k}{g}[/tex] x,

graph of x vs m

Explanation:

For this exercise, the simplest way to determine the mass of the cylinder is to take a spring and hang the mass, measure how much the spring has stretched and calculate the mass, using the translational equilibrium equation

              F_e -W = 0

              k x = m g

              m = [tex]\frac{k}{g}[/tex] x

We are assuming that you know the constant k of the spring, if it is not known you must carry out a previous step, calibrate the spring, for this a series of known masses are taken and hung by measuring the elongation (x) from the equilibrium position, with these data a graph of x vs m is made to serve as a spring calibration.

  In the latter case, the elongation measured with the cylinder is found on the graph and the corresponding ordinate is the mass

Which image best illustrates diffraction?

Answers

The one above I am guessing

Answer: A

Explanation:

If the hoop has speed vo at the bottom of
the pipe, what is its speed when it has rolled
halfway up the side of the pipe?

Answers

The speed of the hoop when it has rolled halfway up the side of the pipe is √(v₀² - gR).

Conservation of energy

The speed of the hoop when it has rolled halfway up the side of the pipe is calculated as follows;

K.E = P.E

- ¹/₂mv₀²  + ¹/₂Iω² = (mgh₀ - mghf)

- ¹/₂mv₀²  + ¹/₂Iω² = (0 - 0.5mgh)        (hf = 0.5h) (half way up)

¹/₂Iω² = ¹/₂mv₀² - 0.5mgh  

where;

I is moment of inertia of the hoop = mr²ω is angular speed = v/r

¹/₂(mr²)(vf/r)² = ¹/₂mv₀²  - 0.5mgh

¹/₂vf²  = ¹/₂v₀² - ¹/₂gh  

vf²  = v₀² - gh

vf = √(v₀² - gh)

where;

h is the distance traveled half-way up the pipe = R

vf = √(v₀² - gR)

[tex]v_f = \sqrt{v_0^2 - gR}[/tex]

Learn more about moment of inertia of hoop here: https://brainly.com/question/14956994

A 65.0 kg skier slides down a 37.20 slope with mu = 0.107.

What is the friction force?

Answers

Answer:

54.3N

Explanation:

The normal force is perpendicular to the slope, so:

Normal Force = cos(37.2)(9.8*65).......507.39N

F(friction)=mu*F(normal)

F(friction)=(0.107)(507.39)

F(friction)=54.3N

Answer:

magnitude of friction force- 54.3

friction force- -54.2

Explanation:

At an amusement park there are 200-kg bumper cars A, B, and C that have riders with masses of 55 kg, 90 kg, and 42.5 kg respectively. Car A is moving to the right with a velocity vA = 2 m/s and car C has a velocity vC = 1.5 m/s to the left, but car B is initially at rest. The coefficient of restitution between each car is 0.8. Determine the final velocity of each car, after all impacts, assuming car A hits car B before car C does. Assume positive sign denoting forward motion and negative sign denoting backward motion.

Answers

Answer:

Vb = 0.334 m/s

Va = -1.265 m/s

Vc = 1.424 m/s

Explanation:

Favorite Answer

Initial momentum = 255(2) – 242.5(1.5) = 146.25

Final momentum = 255Va + 290Vb + 242.5 Vc = 146.25

Vb - Va = 0.8(2) = 1.6

Vc - Vb = 0.8(1.5) = 1.2

Va = Vb -1.6

Vc = Vb + 1.2

255(Vb -1.6) + 290Vb + 242.5(Vb + 1.2) = 146.25

255 Vb – 408 + 290 Vb + 242.5 Vb + 291 = 146.25

787.5 Vb = 263.25

Vb = 0.334 m/s

Va = Vb -1.6 = 0.334 – 1.6 = -1.265 m/s

Vc = Vb + 1.2 = 0.224 + 1.2 = 1.424 m/s

Two girls are estimating each other's power. One runs up some step
ng each other's power. One runs up some steps, and the other times her. Here are their
results:
height of one step = 20 cm
number of steps = 36
mass of runner = 45 kg
time taken = 4.2 s
a .Calculate the runner's weight. (Acceleration due to gravity g=10m
b .Calculate the increase in the girl's gravitational potential energy as she runs up the steps.
c. Calculate her power. Give your answer in kilowatts (kW).​

Answers

Answer:

A. 450 N

B. 3240 J

C. 0.77 KW

Explanation:

From the question given above, the following data were obtained:

Height of one step = 20 cm

Number of steps = 36

Mass of runner = 45 kg

Time taken = 4.2 s

Next, we shall convert 20 cm to metre (m). This can be obtained as follow:

100 cm = 1 m

Therefore,

20 cm = 20 cm × 1 m /100 cm

20 cm = 0.2 m

Next, we shall determine the total height. This can be obtained as follow:

Height of one step = 0.2 m

Number of steps = 36

Total height =?

Total height = 36 × 0.2

Total height = 7.2 m

A. Determination of the runner's weight.

Mass of runner (m) = 45 kg

Acceleration due to gravity (g) = 10 m/s²

Weight (W) =?

W = m × g

W = 45 × 10

W = 450 N

B. Determination of the increase in the potential energy.

At the ground level, the potential energy (PE₁) is 0 J.

Next, we shall determine the potential energy at 7.2 m. This can be obtained as follow:

Mass of runner (m) = 45 kg

Acceleration due to gravity (g) = 10 m/s²

Total height (h) = 7.2 m

Potential energy at height 7.2 m (PE₂) = ?

PE₂ = mgh

PE₂ = 45 × 10 × 7.2

PE₂ = 3240 J

Final, we shall determine the increase in potential energy. This can be obtained as follow:

Potential energy at ground (PE₁) = 0 J

Potential energy at height 7.2 m (PE₂) = 3240 J

Increase in potential energy =?

Increase in potential energy = PE₂ – PE₁

Increase in potential energy = 3240 – 0

Increase in potential energy = 3240 J

C. Determination of the power.

Energy (E) = 3240 J

Time (t) = 4.2 s

Power (P) =?

P = E/t

P = 3240 / 4.2

P = 771.43 W

Finally, we shall convert 771.43 W to kilowatt (KW). This can be obtained as follow:

1000 W = 1 KW

Therefore,

771.43 W = 771.43 W × 1 KW / 1000 W

771.43 W = 0.77 KW

Therefore, her power is 0.77 KW

PLEASE CLICK ON THIS IMAGE I NEED HELP

Answers

Answer:

Second option

Explanation:

"Uniform" pretty much means the same thing happens.

You pull with a force of 295 N on a rope that is attached to a block of mass 22 kg, and the block slides across the floor at a constant speed of 1.6 m/s. The rope makes an angle of 35 degrees with the horizontal. What is the net force on the block

Answers

Answer:

Fnet = 0

Explanation:

Since the block slides across the floor at constant speed, this means that it's not accelerated.According Newton's 2nd Law, if the acceleration is zero, the net force on the sliding mass must be zero.This means that there must be a friction force opposing to the horizontal component of the applied force, equal in magnitude to it:

       [tex]F_{appx} = F_{app} * cos \theta = 295 N * cos 35 = 242 N (1)[/tex]

In the vertical direction, the block is not accelerated either, so the sum of the normal force and the vertical component of the applied force, must be equal in magnitude to the force of gravity on the block:

      [tex]F_{appy} = F_{app} * cos \theta = 295 N * sin 35 = 169 N (2)[/tex]

⇒    169 N + Fn = Fg = 216 N  (3)

This means that there must be a normal force equal to the difference between Fappy and Fg, as follows:Fn = 216 N - 169 N = 47  N (4)

a car moved 120km to the north. what is its displacement?

Answers

120Km. They are the same

what factors affect potential energy

Answers

Mass ,gravity and height
Gravitational potential energy is determined by three factors : mass, gravity and height . All three factors are directly proportional to energy

when a constant force is applied to an object, the acceleration of the object varies inversely with its mass. When a certain constant force acts upon an object with a mass 12 kg, the acceleration of the object is 6 m/s. If the same force acts on another object whose mass is 9kg, what is the objects acceleration

Answers

Answer:

8 m/s²

Explanation:

From the question,

Since the same force act on both object,

F = ma = m'a'.............................. Equation 1

Where F = force action on the obeject, m = mass of the first object, a = acceleration of the first object, m' = mass of the second object, a' = acceleration of the second object.

make a' the subject of the equation

a' = ma/m'................... Equation 2

Given: m = 12 kg, a = 6 m/s², m' = 9 kg.

Substitute these values into equation 2

a' = 12(6)/9

a' = 8 m/s².

Hence the acceleration of the second object is 8 m/s²

The potential energy of a 40-kg cannonball is 14000 J. How high was the cannon ball to have this much potential energy?

Answers

Answer:

35.71 m

Explanation:

Potential energy is calculated using this formula:

PE = mghwhere m = mass (kg). g = gravitational acceleration on Earth (9.8 m/s²), h = height (m)

We are given 3 out of the 4 variables in this problem. We want to solve for h, the height of the cannon ball.

List out the known variables:

PE = 14,000 J m = 40 kg g = 9.8 m/s² h = ? m

Substitute these values into the potential energy formula.

14,000 = (40)(9.8)h 14,000 = -392h h = 35.7142857143

The cannonball was 35.71 m high to have a potential energy of 14,000 J.

The amplitude of a wave
determines the volume of a
sound.
True
O False

Answers

true the amplitude of a wave determines the volume of a sound
Other Questions
Riverbed Corporation has the following accounts included in its December 31, 2020, trial balance: Accounts Receivable $111,900, Inventory $295,000, Allowance for Doubtful Accounts $9,080, Patents $80,900, Prepaid Insurance $9,790, Accounts Payable $79,100, and Cash $32,000. Prepare the current assets section of the balance sheet. (List Current Assets in order of liquidity.) PLEASE ANSWER ASAP FOR BRAINLEST!!!!!!!!!!!!!!!!!!!!!!! can someone help me with this When Christopher Columbus came to the Americas, he randomly chose 3 chickens from Spain to bring along. These 3 chickens were the only chickens to breedin the Americas for hundreds of years. Which term below does this BEST represent?A. Natural SelectionB. Bottleneck EffectC. Hardy Weinberg EquilibriumD. Founder's Effect Raphael Sanzio ws only about 23 years old when he painted this work, and was already recognized as a great artist in Italy. He is one of the most influential artists in history. Credit Line Author/Artist: Title: Medium (Materials): Year Created: Size: Start by analyzing the artwork. 1. Is this a drawing, painting, sculpture, etc.?2. Is it a landscape, figurative, portrait or still-life? (Or other?)3. What media (materials) were used to create the artwork?Next analyze the artistic techniques used by the artist. 4. What areas or focal points draw your eye, or grab your attention?5. Do the colors work with each other?6. Has the artist used all the space on the picture plane? (Did they draw big?)7. What techniques did the artists use?Then analyze the meaning of the artwork: 8. What ideas or feelings do you think of when you view the work?9. Does it tell a story, or is it primarily a study of something realistic?10. Did the artist do a good job in projecting the meaning? I need a comic strip about mutualism, competition, parasitism, commensalism, predator-prey. I will give brainliest please help me. I will need a picture so if you can send it as your answer I would appreciate it. Thank you What cells are in the Digestive system I will give brainliest to whoever that writes an example of a descriptive writing about a friend or family member. Explain how you can locate the Pole Star with the help of Ursa Major? what is a number n3=512 Please!!!!! help!!!!! Oil, natural gas, and coalA. biofuelsB. hydropowerC. fossil fuelsD. renewable resources Help mehhhand number em so ik.. WRITE EM IN SPANISH PLEASEEE which substance will evaporate first??????????????????? What did the Gadsden Purchase help the United States to finallyAccomplish If you could choose a place to explore, what would it be and why? In classical conditioning, the association that is learned is between a ___ ? HOW MANY solutions does this equation have?d2=0 Chloebarber0229Thanks for helping me Halimbawa Ng Di Malayang Tula. At Malayang Tula