Answer: A and B
Explanation:
just took the apex test
Two statements best determine whether an engineering design is
successful
A. Specific project goals were met.
B. Time and money limitations were not exceeded
What is Project in engineering design?
A "project" consists of a coordinated series of activities or tasks performed by engineers, designers, drafters and others from one or more engineering disciplines or departments.
It is important to meet the need of project what the company wants , to meet the project goals for the correct execution of the project . Setting goals can give you a clear focus , motivates employee and set target for your project to work towards
Since , every project have a budget and a need to know if a project is worth the cost or not .
Both overestimation and underestimation of money have negative consequences and any delay in producing the end result of project can reduce the time to market and lead to reduction of profit.
correct options are
A. Specific project goals were met.
B. Time and money limitations were not exceeded.
learn more about Project in engineering design
https://brainly.com/question/14099501?referrer=searchResults
#SPJ3
Calculate the slope of the line on the graph.
Answer: 5
Explanation: rise over run. 25/5 = 5
can you help me doing an essay about actual self
Answer:
yes absolutely
Explanation:
why not
Which statement is true about vectors?
a. All quantities in physics are not vectors.
b. A vector may have either magnitude or direction.
c. The vector’s length should be proportional to its magnitude.
d. Two vectors can be added only if they have the same direction.
Answer:
B
Explanation:
In a food chain, consumers gather energy by _______. a. consuming organisms at a lower trophic level b. consuming organisms at a higher trophic level c. decomposing dead organic matter d. absorbing sunlight directly Please select the best answer from the choices provided A B C D
Answer:
a. consuming organisms at a lower trophic level.
Explanation:
A food chain shows how various organisms are related to each other as per the food they eat. Each level of a food chain refers to a distinct trophic level.
Food chain is basically related to transfer of matter and energy from organism to organism in the form of food.
In a food chain, consumers gather energy by consuming organisms at a lower trophic level
Answer:
a. consuming organisms at a lower trophic level.
Explanation: took the unit test
You're driving your car at a constant speed in a straight line which of the following can be used to cause your car to experience a centripetal acceleration
A)brake pedal
B) steering wheel
C)gas pedal
D)All of the above
An object has an acceleration of 6m/s/s. If the net force was tripled and the mass was doubled, then the new acceleration would be
Question 1 of 20
Two bicyclists are accelerating forward at the same rate. Biker 1 has less
mass than Biker 2. Which statement describes the net force on the bikers?
A. The net forely on both bikers is changing.
B. Both bikers experience the same net force.
C. The net force on Biker 1 is in the backwards direction.
D. The net force on Biker 2 is greater than on Biker 1.
Answer:
The net force on biker 2 is greater than on biker 1
Explanation:
Apex;)
Answer:
D. The net force on biker 2 is greater than on biker 1
Explanation:
the solubility of sugar is 30 degree Celsius at 220 what does it mean
Answer:
So, that if you put 100 mL of 30 degree water in a beaker, you could add up to 220 grams of sugar and it would eventually dissolve. In other words, that mass of sugar should dissolve in 100 mL of water to make a solution that is just saturated.
The solubility of sugar is 30° C at 220. This means 220g of sugar is dissolved in 100g of solvent to make the saturated solution at 30° C. Solutions.
What is the solution?Most frequently, the solubility is represented in terms of mass per volume of water. Solubilities are frequently stated as g/100 mL, g/100 g, or g/L of water.
The ratio you provided is probably 1 g of sugar to 100 mL of water. In other words, if you put 100 mL of water at 30 degrees in a beaker, you could add up to 220 grams of sugar, and it would finally dissolve.
To generate a solution that is just saturated, the mass of sugar should dissolve in 100 mL of water.
Therefore, at 220 degrees, sugar dissolves at 30 degrees. This indicates that to create the saturated solution at 30° C, 220g of sugar must be dissolved in 100g of solvent.
To learn more about the solution, refer to the link:
https://brainly.com/question/23901809
#SPJ6
What theory explains the main cause of mountain building, earthquakes, and volcanic eruptions on Earth?
Group of answer choices
the scientific theory of Earth's shift
the scientific theory of magnetism
the scientific theory of Earth's layers
the scientific theory of plate tectonics
Answer:the scientific theory of plate tectonics I believe
Explanation:
Write a brief summary of table tennis or tennis
Answer:
A point is won by a player when the opponent cannot hit the ball with a racket over the net and onto the other side of the table. Each game is won by being the first player to win 11 points, and be at least 2 points ahead of their opponent. The equipment needed to play table tennis would be a table, rackets, and balls. Some of the rules are no hand-on table (even leaning your hands on the table is not allowed!) Also, if the ball hits the net, you have to serve again.
HEY CAN ANYONE PLS ANSWER DIS!!!!!!!!!!!
Answer:
Planetary Model of the Hydrogen Atom
Anne Marie Helmenstine, Ph. D. The Bohr Model has an atom consisting of a small, positively charged nucleus orbited by negatively charged electrons. Here's a closer look at the Bohr Model, which is sometimes called the Rutherford-Bohr Model.
Explanation:
Answer:
planetary model
Explanation:
Niels Bohr proposed the Bohr Model of the Atom in 1915. ... The Bohr Model is a planetary model in which the negatively charged electrons orbit a small, positively charged nucleus similar to the planets orbiting the sun (except that the orbits are not planar).
In this diagram, which force is represted by L?
a. the force caused by the wings encoutering wind and air
b.the force caused by a draft of wind
c. the reaction force of wind and air that is pushed out of the way
d. the force that exists in reaction to gravity or weight
A racehorse coming out of the gate accelerates from rest to a velocity of 12.0
m/s due west in 2.30 s. What is its average acceleration?
27.6 m/s^2
5.22 m/s^2
-5.22 m/s^2
-27.6 m/s^2
-0.19 m/s^2
O 0.19 m/s^2
Answer:
5.22 m/s²
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 0 m/s
Final velocity (v) = 12 m/s
Time (t) = 2.3 s
Acceleration (a) =.?
Acceleration is defined as the change of velocity with time. Mathematically, it is expressed as:
Acceleration (a) = final velocity (v) – initial velocity (u) / time (t)
a = (v – u) /t
With the above formula, we can obtain the acceleration of the racehorse as follow:
Initial velocity (u) = 0 m/s
Final velocity (v) = 12 m/s
Time (t) = 2.3 s
Acceleration (a) =.?
a = (v – u) /t
a = (12 – 0) / 2.3
a = 12 /2.3
a = 5.22 m/s²
Therefore, the average acceleration of the racehorse is 5.22 m/s²
Explain how if a solid, liquid, and gas are put into individual containers how they fill the container.
Answer:
serial in which container is filled
Solid -base of container
Liquid- above solid
Gas- above liquid
Explanation:
If any mixture of matter in different state (that solid , liquid or gas )are kept in any container, then substance with higher density will be settled at lowest surface first and similarly the substance with lowest density will be at upper part of container.
In the given container we have to keep solid, liquid and gas
sold has the highest density,gas the lowest density andliquid has the density higher than gas but less than solid.based on this
solid will be at surface of container
above sold will be liquid
above liquid will be presence of Gas
serial in which container is filled
Solid -base of container
Liquid- above solid
Gas- above liquid
Help mee what molecule is this
how am I supposed to know
What groups of animals are heterotrophs?
a.) herbivores
b.) carnivores
c.) omnivores
d.) all the above
Answer:
All of the above.
Explanation:
As a review, remember that carnivores eat other animals and omnivores eat both plants and animals. There is yet another term used when talking about food chains, the word heterotroph. Anything that is not an autotroph is a heterotroph. The word means “other feeding” or feed off of others.
define fundamental units
Answer:
one of a set of unrelated units of measurement, which are arbitrarily defined and from which other units are derived. For example, in the SI system the fundamental units are the meter, kilogram, and second.
Explanation:
4. A cylindrical tube has a length of 14.4cm and a radius of 1.5cm and is filled with a colorless gas. If the density of the gas is known to be 0.00123g/cm', what is the mass of the gas in the tube in mg?
Answer:
Mass, m of gas is 0.2504 grams.
Explanation:
First, we need to solve for the volume of the cylindrical tube.
Volume of cylinder is given by the formula;
[tex] V = 2\Pi r^{2}h[/tex]
Where, V represents volume.
π represents pie
r represents radius.
h represents height or length.
Given the following data;
Radius, r = 1.5cm
Length, h = 14.4cm
Density, d = 0.00123g/cm³
Substituting into the equation;
[tex] V = 2 * 3.142 * (1.5)^{2}14.4[/tex]
[tex] V = 2 * 3.142 * 2.25 * 14.4[/tex]
[tex] V = 203. 6016[/tex]
Therefore, the volume of the cylindrical tube is 203. 6016cm³
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the formula;
[tex]Density = \frac{mass}{volume}[/tex]
[tex] Mass = density * volume [/tex]
Substituting into the equation, we have;
[tex] Mass = 0.00123 * 203. 6016 [/tex]
Mass = 0.2504g.
list 3 lessons we learned from history to handle pandemic
Answer:
1- impact
2. Inequalities
4. Controllability
Explanation:
Please help!! The graph in the figure shows the position of a particle as it travels along the x-axis. What is the magnitude of the average speed of the particle between t = 1.0 s and t = 4.0 s?
The uniform movement allows to find the average speed, for which the correct answer is:
B) 1.3 m / s
Kinematics studies the movement of bodies, establishing relationships between position, velocity and acceleration. In the special case that the acceleration is zero the motion is called uniform motion.
v = [tex]\frac{\Delta x}{\Delta t}[/tex]
Where v is the velocity, Δx is the position variation and Δt is the time variation in the analyzed interval.
In this case
v = [tex]\frac{2.0 - (-2.0)}{4.0\ -1.0}[/tex]
v = 1.33 m / s
In conclusion using the uniform motion ratios we can find that the correct answer for the average velocity is
B) 1.3 m / s
Learn more about average speed here:
https://brainly.com/question/17661499
HELP PLEASE!!! 15 POINTS
How does the speed of waves vary in different media?
Radio waves are used to transmit verbal messages through space.
IS THIS TRUE OR FALSEE???
Which statement is true about magnetic field lines?
O A. They point toward the north pole of a magnet and away from the
south pole.
OB. They point toward the south pole of a magnet and away from the
north pole
O C. They loop from the south pole to the south pole and from the
north pole back to the north pole.
OD. No consistent pattern exists in the lines.
Answer:
It’s option B
Explanation:
Magnetic field lines are defined to have the direction that a small compass points when placed at a location. If small compasses are used to map the magnetic field around a bar magnet, they will point in the directions shown: away from the north pole of the magnet, toward the south pole of the magnet.
The magnetic field lines are the points towards the south pole of magnet and are away from the north pole. Thus, option B is correct.
What are magnetic field lines?A North magnetic pole would move along magnetic field lines, which are lines drawn in a magnetic field. Magnetic lines of force are another name for the magnetic field lines.
The north pole serves as the starting point for magnetic lines of force, which end at the south pole. They won't ever cross over each other.
Small compasses will point away from the magnet's north pole and toward its south pole when used to map the magnetic field surrounding a bar magnet.
Therefore, the magnetic field lines are given to have direct attention away from the north pole of a magnet and toward its south pole.
Learn more about magnetic field lines, here:
https://brainly.com/question/17011493
#SPJ5
PLEASE PLS PLS ANSWER ASAP
Answer:
Explanation:
24 i think
Answer:
B. 24
Explanation:
There are 24 atoms in one molecule of C6 H12 06. This chemical compound is made up of 6 atoms of carbon, 12 atoms of hydrogen, and 6 atoms of oxygen. We find the number of atoms by adding these numbers up. We than get:
6 + 12 + 6 = 12 + 12 = 24
Therefore, there are 24 atoms in the following chemical formula.
What charge does Chlorine have after bonding with magnesium
Answer:
A magnesium atom will lose 2 electrons to form a stable 2+ ion. Chlorine is in group 7 of the periodic table. A chlorine atom will gain 1 electron to form a stable 1- ion.
Explanation:
witch element is the most prevalent in the human body a)nitrogen,b)hydrogen,c)carbon,d)oxygen
A projectile is launched horizontally at a speed of 30m/s from a 100m tall building. how much time it will take to reach the ground?
Answer:
3.3 seconds I believe
Explanation:
matter makes up all ? and ?
The gradual change in a species over time is called
a.
mutation.
b.
evolution.
c.
migration.
d.
variation.
PLZ HURRY WILL GIVE BRAINLIEST
Answer: B. Evolution
Explanation:
As species grow older over time they will gradually evolve through natural selection and evolution.
The gradual change in a species over time is known as evolution (b).
The process of evolution occurs through several mechanisms, including mutation, migration, and natural selection.
Mutation (a) is the spontaneous change in the genetic material of an organism. These changes can result in new traits that may be advantageous, disadvantageous, or neutral for survival. When mutations occur, they can introduce genetic variation within a population, which serves as the raw material for evolution.
Natural selection is a crucial factor driving evolution. Individuals with advantageous traits that better suit their environment are more likely to survive and reproduce, passing on these advantageous traits to their offspring. Over generations, the frequency of beneficial traits increases in the population, leading to the adaptation and evolution of the species.
Variation (d) encompasses the differences in physical traits and genetic makeup among individuals within a population. This variation is essential for evolution to occur since it provides the raw material for natural selection to act upon.
To know more about species here
https://brainly.com/question/9506161
#SPJ6
please help im dying
I will give you more points if you want!!! :)
But first please answer the following question!
Answer:
thank you very much for giving me points.
Explanation:
I really appreciate it so muchhhhh so muchhhh thanks again