Answers
Answer:
A and C
Explanation:
Hope this helps :)
Answer:
I think B and C hope this helps!
Explanation:
Related Questions
write 4 important of measurement?
Answers
Answer:
Measurement helps in buying and selling goods
Measurement helps in doing various science
experiment
Measurement is used in our daily life
Measurement is essential for making roads, bridge etc
A subrule of the Cahn-Ingold-Prelog system specifies that higher mass number takes precedence over lower when distinguishing between isotopes. Determine the absolute configurations of the reactant and product in the biological oxidation of isotopically labeled ethane.
Answers
Answer:
The correct answer is - S- configuration.
Explanation:
Placing the numbers in order of the priorities of each reactant in the reaction is essential to determining the configuration of the reactant and product in the biological oxidation of isotopically labeled ethane.
CH3 - T- D is the correct order of the increasing of the priorties. so this is moving from CH3 to D which is Anti-clockwise which means the configuartion is S as we know clockwise movement is R configuarion and anti-clockwise in S configuartion.
A hockey player is wearing ice skates and pushes against the wall propelling her backward on the ice. According to Newton's third law of motion, which of the following best compares the forces acting between the wall and the hockey player?
A.
The forces are equal and applied against gravity.
B.
The forces are equal and applied in the opposite direction.
C.
The forces are different sizes and applied in the opposite direction.
D.
The forces are equal and applied in the same direction.
Answers
Answer:
The forces are equal and applied in the opposite direction
Explanation:
Study island 100
A desert area has many species of cactus and brush as well as birds, snakes, lizards, and rodents. This desert is an example of a
Answers
Answer: Climax Commuity.
Explanation: (hope it’s right! Good luck!)
27. The compound having only primary hydrogen atoms is ( ).
(A) isobutene
(B) 2,3-dimethylbutene
(C) cyclohexane
(D) propyne
Answers
Answer:
The correct answer is - (a) isobutene.
Explanation:
A 1° or primary hydrogen atom is one that is bonded to a 1° carbon atom; a 2° hydrogen atom is one that is connected to a 2° carbon atom; In isobutene only among all the all option having only primary hydrogen atoms. rest have secondary or teritary hydrogen atoms in them
C1∘H3≡CH: (only 1∘ hydrogen atoms)
What is the standard reduction potential,E, for the half-reaction Zn2+(aq)+2e- -> Zn(s)?
Answers
Answer:
E = -0.76 V
Explanation:
The potential between the anode and the cathode is called standard reduction potential. It gives the tendency of the species to get reduced.
The given half reaction is :
[tex]Zn^{2+}(aq)+2e^{-}\rightarrow Zn(s)[/tex]
Zn²⁺ is the reduced form of Zn.
It is a stronger reducng agent.
Its standard reduction potential (E) has a sandard value.
E = -0.76 V
Hence, the correct option is (c).
How are Parkinson's disease and ALS similar?
Both diseases are preventable.
Dementia is a symptom of both diseases.
Both diseases affect control of voluntary muscles.
Scientists understand the causes for both diseases.
HELP PLZ
Answers
Answer:
Both diseases affect the control of voluntary muscles.
Explanation:
Parkinson's disease is a progressive brain disease that affects movement. It affects the nerve cells that produce dopamine in the part of the brain called substantia nigra. The symptoms include shaking, stiffness, and difficulty with walking, balance, and coordination. Symptoms get worse with time, often leaving people with difficulty walking and talking.
ALS (amyotrophic lateral sclerosis) is a progressive nervous system disease that affects nerve cells in the brain and spinal cord. The first symptoms usually involve muscle weakness, and as the disease progresses, it results in the loss of muscle control.
Scientists don't know the exact cause of these diseases. As the cause is not known, there is no exact way to prevent them. There is no cure for them, either. The treatment is focused on the management of symptoms.
This is why the third option is the correct one.
A pure substance composed of two or more different elements is aln)
a. ion
b. heterogeneous mixture
c. chemical compound
d. solid
e. solution
chemical compound
Answers
Answer:
c
Explanation:
that is my dads answer
A pure substance composed of two or more different elements is a chemical compound.
When two or more atoms are chemically combined, we refer to such a combination as a chemical compound.
Since a chemical compound contains only a given set of elements which are chemically combined together, a chemical compound is also a pure substance.
Hence, a pure substance composed of two or more different elements is a chemical compound.
Learn more; https://brainly.com/question/6284546
The temperature of a 700. g bar of iron decreases by 30oC when the iron is plunged into 500. g of water. What is the temperature increase of the water, assuming that no heat is lost in the transfer?
Answers
Answer:
4.5 °C
Explanation:
According to the law of conservation of energy, the sum of the heat lost by the iron and the heat gained by the water is zero.
Qi + Qw = 0
Qi = -Qw [1]
We can calculate each heat using the following expression.
Q = c × m × ΔT [2]
where,
c: specific heat capacitym: massΔT: change in the temperatureReplacing [2] in [1], we get
ci × mi × ΔTi = -cw × mw × ΔTw
ΔTw = -ci × mi × ΔTi / cw × mw
ΔTw = -0.108 cal/g.°C × 700 g × (-30 °C) / 1 cal/g.°C × 500 g
ΔTw = 4.5 °C
True or False: Radon is a solid at – 100 °C.
Answers
One role of enzymes in the human body
Answers
digestion
does that answer it?
Please show work!
Question below::
Answers
Under what conditions does a Lunar eclipse occur?
Answers
Answer:
when the Moon moves into the Earth's shadow
when the Sun, Earth, and Moon are exactly or very closely aligned with the Earth between the other two, and only on the night of a full moon
Explanation:
help me plzz in chemistry
Answers
a) f2 loses electrons and is oxidised. li gains electrons and is reduced
c)sn2+ loses electrons and is oxidised.Al gains electrons and is reduced
b)br2 loses electrons and is oxidised. I- in KI gains electrons and is reduced
Which best illustrates the way in which radiation transfers thermal energy?
A red ball at left labeled warm does not touch a blue ball labeled cool at right. Curved arrows point from the blue ball to the red ball.
A red ball at left labeled warm does not touch a blue ball labeled cool at right. Curved arrows point from the red ball to the blue ball.
A red ball at left labeled warm touches a blue ball labeled cool at right. Straight arrows point from the blue ball to the red ball.
A red ball at left labeled warm touches a blue ball labeled cool at right. Straight arrows point from the red ball to the blue ball.
Answers
Answer:
B or the second answer.
Explanation:
It's heat transfer and the objects aren't directly touching. B is the only answer that fits.
Hope this helps!
Answer:
b
Explanation:
What is the free energy change if the ratio of the concentrations of the products to the concentrations of the reactants is 22.3, and the temperature is 37.0 °C? ?G°\' for the reaction is –16.7 kJ/mol.
Answers
The free energy change(Gibbs free energy-ΔG)=-8.698 kJ/mol
Further explanationGiven
Ratio of the concentrations of the products to the concentrations of the reactants is 22.3
Temperature = 37 C = 310 K
ΔG°=-16.7 kJ/mol
Required
the free energy change
Solution
Ratio of the concentration : equilbrium constant = K = 22.3
We can use Gibbs free energy :
ΔG = ΔG°+ RT ln K
R=8.314 .10⁻³ kJ/mol K
[tex]\tt \Delta G=-16.7~kJ/mol+8.314.10^{-3}\times 310\times ln~22.3\\\\\Delta G=-8.698~kJ/mol[/tex]
One method used commercially to peel potatoes is to soak them in a solution of NaOH for a short time and then remove them from the NaOH. The peel will have separated from the potato and so it can then easily be sprayed off to yield beautifully peeled potatoes! The NaOH solution however, must be analyzed periodically to make sure its concentration is adequate for the reaction In one such analysis, 45.7 mL of 0.500 M H2SO4 is required to react completely with a 20.0 mL sample of the NaOH solution. The products of the reaction are Na2SO4 and water. What is the concentration of the starting NaOH solution?a. 1.14 M b. 2.28 M c. 0.438 M d. 0.500 M e. 0.571M
Answers
Answer:
b. 2.28 M
Explanation:
The reaction of neutralization of NaOH with H2SO4 is:
2NaOH + H2SO4 → Na2SO4 + 2H2O
Where 2 moles of NaOH react per mole of H2SO4
To solve the concentration of NaOH we need to find the moles of H2SO4. Using the chemical equation we can find the moles of NaOH that react and with the volume the molar concentration as follows:
Moles H2SO4:
45.7mL = 0.0457L * (0.500mol/L) = 0.02285 moles H2SO4
Moles NaOH:
0.02285 moles H2SO4 * (2moles NaOH / 1 mol H2SO4) = 0.0457moles NaOH
Molarity NaOH:
0.0457moles NaOH / 0.020L =
2.28M
Right option:
b. 2.28 MThe concentration of the starting NaOH solution is:
b. 2.28 M
Neutralization reaction:
The reaction of neutralization of NaOH with H₂SO₄ is:
2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂O
Calculation for concentration of NaOH:We need to find the moles of H₂SO₄. Using the chemical equation we can find the moles of NaOH.
Moles of H₂SO₄:
45.7mL = 0.0457L * (0.500mol/L) = 0.02285 moles of H₂SO₄
Moles of NaOH:
0.02285 moles H₂SO₄ * (2moles NaOH / 1 mol H₂SO₄) = 0.0457moles NaOH
Molarity of NaOH:
0.0457moles NaOH / 0.020L =2.28M
Thus, the concentration of the starting NaOH solution is: 2.28 M.
Find more information about Molarity here:
brainly.com/question/17138838
What is the molarity of a HCl solution that
contains 6.27 g of HCl in 163 mL of solution?
Answer in units of M.
Answers
Answer:
M = 1.04 M
Explanation:
Given data
Molarity of solution = ?
Mass of HCl = 6.27 g
Volume of solution = 163 mL (163 mL× 1L /1000 mL = 0.163 L)
Solution:
Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.
Formula:
Molarity = number of moles of solute / L of solution
Number of moles of HCl:
Number of moles = mass/molar mass
Number of moles = 6.27 g / 36.5 g/mol
Number of moles = 0.17 mol
Molarity:
M = 0.17 mol/ 0.163 L
M = 1.04 M
Answer:
4.6
Explanation:
What is the mass of 1 mol of Ca atoms to three significant Figures of CaSO4
Answers
Answer:
40g
Explanation:
Given parameters:
Number of moles = 1mol
unknown:
mass of Ca = ?
Solution:
The number of moles of a substance is related to mass using the expression below;
Mass = number of moles x molar mass
Molar mass of Ca = 40g/mol
So;
Mass of Ca = 1 mol x 40g/mol = 40g
A red laser pointer emits light at a wavelength of 488 nm. If the laser emits 7.5 10–4 J of energy per second in the form of visible radiation, how many photons per second are emitted from the laser?
a)
4.1 10–19 photons/sec
b)
5.4 10–16 photons/sec
c)
8.9 1014 photons/sec
d)
1.8 1015 photons/sec
e)
2.5 1018 photons/sec
Answers
The answer to the question, how many photons per second are emitted from the laser is d. 1.84 × 10¹⁵ photons/sec
Since the red laser pointer emits light of wavelength 488 nm, we need to find the energy of each photon from
E = hc/λ where h = Planck's constant = 6.63 × 10⁻³⁴ Js, c = speed of light = 3 × 10⁸ m/s and λ = wavelength of light = 488 nm = 488 × 10⁻⁹ m
Substituting the values of the variables into the equation, we have
E = hc/λ
E = 6.63 × 10⁻³⁴ Js × 3 × 10⁸ m/s ÷ 488 × 10⁻⁹ m
E = 19.89 × 10⁻²⁶ Jm ÷ 488 × 10⁻⁹ m
E = 0.04076 × 10⁻¹⁷ J per photon
E = 4.076 × 10⁻¹⁹ J per photon
Since the laser emits 7.5 × 10⁻⁴ J per second, the number of photons emitted from the laser per second = energy per second/energy per photon
= 7.5 × 10⁻⁴ J per second ÷ 4.076 × 10⁻¹⁹ J per photon
= 1.84 × 10¹⁵ photons/sec
The answer to the question, how many photons per second are emitted from the laser is d. 1.84 × 10¹⁵ photons/sec
Learn more about number of photons per second emitted here:
https://brainly.com/question/13092011
Humans absorb oxygen from the air they breathe in and exhale carbon dioxide gas, CO2.Carbon dioxide gas is
A
an element made of carbon and oxygen atoms.
B
a solution made of carbon and oxygen atoms.
C
a compound of carbon and oxygen atoms.
D
a mixture of carbon and oxygen atoms.
Answers
Answer:
A
an element made of carbon and oxygen atoms.
So I think the answer is going to be A An element made of carbon and oxygen atoms.
a mixture of of sand,salt and sawdust was stirred into water and the mixture was allowed to stand.
a)how might you collect "pure" sawdust?
b)what is the sediment which forms?
c)the clear liquid was poured off and divided into 2 parts.one part was evaporated,and the other was distilled.
i)what substance would be collected by distillation?
ii)what would be collected by evaporation?
iii)what difference in properties allows the separation in both evaporation and distillation?
Answers
Answer:
A) To get the pure sawdust u can filter it..
B) The muddy sagment that will form .
C) The clear liquid can divide into 3 layers on the top there will be pure water in middle there will be muddy or dark layer of water and in lower layer there will be the stones or heavy particles of water .
How many moles of oxygen would
be consumed to produce 68.1 g
water?
Answers
Answer:
4.75 moles of oxygen would be consumed by water
Explanation:
Given data:
Mass of water produced = 68.1 g
Number of moles of oxygen consumed = ?
Solution:
Chemical equation:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
Number of moles of water:
Number of moles = mass/molar mass
Number of moles = 68.1 g/ 18 g/mol
Number of moles = 3.8 mol
Now we will compare the moles of water with oxygen.
H₂O : O₂
4 : 5
3.8 : 5/4×3.8 = 4.75 mol
Answer: 4.75 moles of oxygen
Explanation:
molecular formula of alkyne containing 10 carbon atom
Answers
Answer:
Decyne: C10H18
Hope it helps! please mark me brainliest..
Merry Christmas good day
The general formula for alkynes is CnH2n-2
the number of carbon atoms is 10 so the number of hydrogen atoms will be 10*2-2=20-2=18hydrogen atoms
the molecular formula for this alkyne is :
C₁₀H₁₈ which is called decyne
If I have 80 grams of H2 how many molecules of H2 do I have?
Answers
Answer:
2 molecules
Explanation:
I don't know how to explain it
The chemical formula of water is H₂O. Then 1 mole of water weighs 18 gram. Hence, 80 gram of water is equal to 4.4 mole.
What is chemical formula ?
Chemical element symbols, numbers, and occasionally other symbols like parentheses, dashes, brackets, commas, and plus and minus signs are used in a chemical formula to represent information about the chemical proportions of the atoms that make up a certain chemical compound or molecule.
It displays the constituent elements and how many atoms of each element are found in a single complex molecule. It also represents the compound's molecular weight.
Water has the chemical formula H₂O. Water weights 18 grams per mole. 80 grams of water are therefore equivalent to 4.4 moles.
Thus, The chemical formula of water is H₂O. 80 grams of H₂ contain 4.4 molecules of water.
To learn more about chemical formula, follow the link;
https://brainly.com/question/11995171
#SPJ2
NEED HELP ON 31,32,33..ONLY IF YOU KNOW PLEASE
Answers
Answer:
31. C
32. D
33. B
Explanation:
31. A plant cell is an eukaryotic cell i.e. it contains a membrane-bound nucleus, located CENTRALLY. The nucleus is the largest organelle in the plant cell. The cell/plasma membrane bounds the cell while the chloroplast organelle (site of photosynthesis) is also located in the plant cell. Based on this description, the image in OPTION C is correct.
32. Pottasium (K) is a highly reactive group 1 element. As stated in this question, pottasium reacts vigorously with water (H2O). This reactive property of K element is due to its valence electrons. However, elements in the same group as pottasium i.e same column on the periodic table will have the same number of valence electrons, hence, will behave chemically similar. Therefore, elements in the same column as pottasium will react the same way with water.
33. A reactant is a an element/compound in a chemical reaction that gets used up to form new products. They are usually the starting materials located on the left side of any equation. In this equation shown as:
2CuO + C → 2Cu + CO2
CuO and C are the REACTANTS while Cu and CO2 are the products.
Write a word or phrase beginning with each letter of the word GOLD that describes the properties of these gold coins
Answers
O - ?
L- Luster (shine)
D- Dense / Ductile
Periodic table is divided into three metals, non metals and metalloids. The metals are kept on the left side of the periodic table. Gold is a metal which exist in d block.
What is metal ?
Metals are those elements which is hard, conduct electricity, ductile, lustrous and malleable.
The properties of gold are:
1.Gold have free electrons that's why they can conduct electricity
2. Since atoms in Gold are very closely packed in a definite crystal so gold is solid. It is not brittle that is it can not be broken down easily
3. Gold does not react with water easily.
4.Gold is denser than water hence it sink in water.
Gold is a transition element. Gold is found in d block of periodic table. Its symbol is Au.
Therefore, Gold is a metal which exist in d block.
Learn more about the metals, here:
https://brainly.com/question/27859211
#SPJ2
What is the molarity of 2.0 moles of glucose
in 4.0 L of glucose solution?
Answers
Answer:
0.5 M
General Formulas and Concepts:
Chemistry - Aqueous Solutions
Molarity = moles of solute / liters of solutionExplanation:
Step 1: Define
2.0 mol glucose
4.0 L glucose solution
Step 2: Find Molarity
Substitute: M = 2.0 mol / 4.0 LDivide: M = 1/2Evaluate: M = 0.5Which of the following determines the identity of an element?
Answers
Calculate the molarity of a solution of potassium hydroxide if 19.55 mL of KOH is required for the titration of a 20.20 mL sample of a 0.3467 M sulfuric acid solution.
Answers
Answer:
The correct answer is 0.3582 M.
Explanation:
Based on the given information, the volume of KOH given is 19.55 ml, the volume of sulfuric acid given is 20.20 ml, and the molarity of sulfuric acid is 0.3467 M. There is a need to find the molarity of KOH.
The formula to use in the given case is,
M1V1 = M2V2
Here M1 is the molarity of KOH, V1 is the volume of KOH, M2 is the molarity of sulfuric acid, and V2 is the volume of H2SO4.
Here V1 is 19.55 ml, M2 is 0.3467 M, and V2 is 2020 ml.
Now putting the values in the equation we get,
M1 * 19.55 = 0.3467 * 20.20
M1 * 19.55 = 7.00334
M1 = 7.00334/19.55
M1 = 0.3582 M
Hence, the molarity of the given KOH is 0.3582.
The molarity of a solution of potassium hydroxide is 0.3582M
To get the molarity of the solution of potassium hydroxide KOH, we will apply the formula;
[tex]C_1V_1=C_2V_2[/tex]
C₁ and C₂ are the concentration of the solutionV₁ and V₂ are volumes of the solutionGiven the following parameters;
C₂ = 0.3467M
V₂ = 20.20mL
V₁ = 19.55mL
C₁ = ?
Substitute the given parameters into the formula:
C₁ × 19.55 = 0.3467× 20.20
C₁ × 19.55 = 7.00334
C₁ = 7.00334/19.55
C₁ = 0.3582M
Hence the molarity of a solution of potassium hydroxide is 0.3582M
Learn more on molarity here: https://brainly.com/question/19555927