The question is incomplete, the complete question is:
Which statements are consistent with Dalton's atomic theory as it was originally stated? Why?
a. Sulfur and oxygen atoms have the same mass.
b. All cobalt atoms are identical.
c. Potassium and chlorine atoms combine in a 1:1 ratio to form potassium chloride.
d. Lead atoms can be converted into gold.
Answer: The correct options are b) and c).
Explanation:
Some of the postulates of Dalton's atomic theory are:
All matter is made of very tiny particles called atoms that participate in chemical reactionsAtoms are indivisible particles that cannot be created or destroyed in a chemical reactionAtoms of a given element are identical in mass and chemical propertiesAtoms of different elements have different masses and chemical properties.Atoms combine in the ratio of small whole numbers to form compounds.The relative number and kinds of atoms are constant in a given compound.For the given options:
For a:
The statement is inconsistent with the theory as no two elements can have the same mass. Only atoms of the same element can have the same mass.
For b:This is consistent with the theory as atoms of the same element are identical.
For c:This is consistent with the theory as atoms combine in a simple whole number ratio.
For d:The statement is inconsistent with the theory as atoms of one element cannot be changed to atoms of other element.
Hence, the correct options are b) and c).
A gas has a pressure of 450 mmHg at 100 degrees Celsius. What will its new pressure be when the temperature rises 200 degrees Celsius
Answer:
P2 = 900 mmHg.
Explanation:
Given the following data;
Initial pressure = 450 mmHg
Initial temperature = 100°C
Final temperature = 200°C
To find the final pressure, we would use Gay Lussac's law;
Gay Lussac states that when the volume of an ideal gas is kept constant, the pressure of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Gay Lussac's law is given by;
[tex] PT = K[/tex]
[tex] \frac{P1}{T1} = \frac{P2}{T2}[/tex]
Making P2 as the subject formula, we have;
[tex] P_{2}= \frac{P1}{T1} * T_{2}[/tex]
[tex] P_{2}= \frac{450}{100} * 200 [/tex]
[tex] P_{2}= 4.5 * 200 [/tex]
Final pressure, P2 = 900 mmHg.
which of the following is saturated hydrocarbon?
1 alkyne
2 alkane
3 ethylene
4 alkene
Answer:
2 alkane
Explanation:
Because it has a single bond therefore it is saturated
What is the most common isotope for element X
Answer:
isotope 2
Explanation:
it has the highest percentage abundance
what is a saturted solution
Answer:
Please find the definition and further explanation below
Explanation:
Based on the ability for the solvent (liquid substance) to dissolve a solute (solid substance), a solution can either be unsaturated, saturated or supersaturated. A SATURATED SOLUTION is that which contains the maximum amount of solute a solvent can possibly dissolve.
In other words, a saturated solution can no longer dissolve anymore solute, and hence, any further solute added forms crystals or makes the solution supersaturated.
during summer water kept in an earthen pot become cool because of the phenomenon of
During summer water kept in an earthen pot become cool because of the phenomenon of evaporation.
What purpose does ammonium lauryl sulfate serve when used as a surfactant? Where is it
commonly used?
Answer:
SLS functions in cleaning product as a surfactant, wetting surfaces, emulsifying or solubilizing oils, and suspending soil so that they can be rinsed away. This ingredient contributes foaming properties to cleaning products. SLS is safe for use in cleaning products.
Sodium lauryl sulfate and ammonium lauryl sulfate are surfactants that help with the mixing of oil and water. As such, they can clean the skin and hair by helping water to mix with oil and dirt so that they can be rinsed away or suspend poorly soluble ingredients in water.
Safety Information:The U.S. Food and Drug Administration (FDA) includes sodium lauryl sulfate on its list of multipurpose additives allowed to be directly added to food. Sodium lauryl sulfate and ammonium lauryl sulfate are also approved indirect food additives. For example, both ingredients are permitted to be used as components of coatings.
The safety of sodium lauryl sulfate and ammonium lauryl sulfate has been assessed by the Cosmetic Ingredient Review (CIR) Expert Panel on two separate occasions (1983 and 2002), concluding each time that the data showed these ingredients were safe in formulations designed for brief, discontinuous use, followed by thorough rinsing from the surface of the skin. In products intended for prolonged contact with skin, concentrations should not exceed 1%.
Sodium lauryl sulfate and ammonium lauryl sulfate may be used in cosmetics and personal care products marketed in Europe according to the general provisions of the Cosmetics Regulation of the European Union.
Learn more about Sodium lauryl sulfate and ammonium lauryl sulfate
https://brainly.com/question/12149356
#SPJ2
Which describes the difference between a claim and a scientific claim?
Claims are based more on truth than scientific claims are.
Anyone can make a claim, but a scientific claim is backed by experimental evidence.
Claims are based on evidence and scientific claims are made by scientists.
Controlled experiments are used in claims, while scientific claims use multiple trials.
Answer:
B. Anyone can make a claim, but a scientific claim is backed by experimental evidence.
<3 Have a nice day!!
Answer:
the awnser is B i got it right
Explanation:
What mss of sulfamic acid is required to make 250cm3 of a 0.150mol/dm3 solution? please help
Answer:
sorry i dint understand can u ask it in a simpler way
Explanation:
what is the difference between physical chemistry and environmental chemistry.
please Answer and give the correct answer...
Answer:
Physical chemistry is the study of macroscopic, and particulate phenomena in chemical systems in terms of the principles, practices, and concepts of physics such as motion, energy, force, time, thermodynamics, quantum chemistry, statistical mechanics, analytical dynamics and chemical equilibrium while environmental chemistry is the study of chemical processes that occur in water, air, terrestrial and living environments, and the effects of human activity on them.
Physical chemistry is the area of chemistry that deals with how materials interact and change. The scientific study of chemical and biological phenomena that take place in the environment is known as environmental chemistry.
Physical chemistry attempts to quantify, correlate, and explain the quantitative features of reactions by focusing, in contrast to other branches, on the physics principles that underlie all chemical interactions (such as the gas laws).
While environmental chemistry is the study of chemical species' sources, reactions, movement, impacts, and fates in the air, soil, and water environments, as well as the impact of human activity and biological activity on these, can be summed up as the field of chemical ecology.
To learn more about environmental chemistry visit;
https://brainly.com/question/25046469
https://brainly.com/question/22517940
Explain how carbon’s bonding ability makes it unique.
[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]
The carbon atom is unique among elements in its tendency to form extensive networks of covalent bonds not only with other elements but also with itself. ... Moreover, of all the elements in the second row, carbon has the maximum number of outer shell electrons (four) capable of forming covalent bonds.
Hope it helps uh ✌️✌️✌️
Gud mrng
If you were given a mixture that contains rice and sand, can you separate them using filtration method? Why?
Answer:
Yes
Explanation:
A rice and sand combination can be separated using the filtering process.
First, we'll employ filtration, which involves filtering rice grains with sand.
RICE Particles that are heavy and large will stay in place, while light and tiny sand particles will fill in the gaps.
What is the weight on Earth of an apple with mass 150g?
1. A) Calculate DO of water at 25 0 C, P 0 = 1.01x10 5 Pa; given: water vapor pressure (25 0 C) is 3.2x10 3 Pa and Henry constant of oxygen in water is 1.3x10 -8 mol/l.Pa b) How's DO content changed as increase or decrease water temperature? Explain.
Answer:
cfvgbhnjmk,
Explanation:
a) the use of heat energy to react carbon dioxide with water to produce oxygen. b) a chemical reaction between carbohydrates and oxygen to produce carbon dioxide, water, and heat energy. c) a photochemical reaction involving carbon dioxide and water to produce carbohydrates and oxygen. d) a photochemical reaction involving carbon dioxide and oxygen to produce water and oxygen.
Answer: b) a chemical reaction between carbohydrates and oxygen to produce carbon dioxide, water, and heat energy
Explanation:
Based on the options, I assume that this is talking about the process of respiration. Respiration allows living things to produce energy by reacting carbohydrates with oxygen.
This results in the release of energy in the form of heat in a cell and also the formation of carbon dioxide and water. This type of respiration is known as Aerobic respiration.
Which natural law do biogeochemical cycles address?
The ground state of an electron is the least stable energy state of an atom
Answer:
electron configuration
Explanation:
The arrangement of electrons in the atomic orbitals of an atom is called the electron configuration. Electron configurations can be determined using a periodic table.
During an experiment, solid iodine was placed in a sealed container. The container was gradually heated and purple-colored vapors of iodine formed were observed. Describe this system when it reaches phase equilibrium. (10 points)
Answer:
See explanation
Explanation:
For a chemical system in a state of dynamic equilibrium, the rate of forward reaction is equal to the rate of reverse reaction.
For this system under consideration;
I2(s)⇄I2(g)
When we heat the container, solid iodine is converted into purple coloured iodine vapour.
When equilibrium is achieved in the system, there will be no net change in the amount of solid iodine and iodine vapour present in the system since the rate of forward and reverse reactions are equal for a system in a state of equilibrium.
El simbolo del ion que contiene 24 protones, 28 neutrones y 21 electrones es : A)Sc+3 B)Sc-3 C)Sc D)Cr E)Cr-3
Answer:
Cr ^ 3 +
Explanation:
Recordemos que el número atómico es el número de protones en el núcleo del átomo. También corresponde al número de electrones en el átomo neutro.
Dado que el número de protones es 24, entonces el elemento debe ser cromo.
Si hay 21 electrones presentes, entonces se deben haber perdido 3 electrones para dar Cr ^ 3 +.
Consider this equilibrium:
HCO3- + H2PO4-HPO42- + H2CO3.
What are the Brønsted-Lowry acids in this equilibrium?
A. HCO3- and H2CO3
B. HCO3 and HPO42-
C. H2PO4! and H2CO3
D. H2PO4' and HPO4-
E. HCO3 and H2PO4!-
Answer:
the answer is option E they are bronsted lowry acid
What mass of N2O5 will result from the reaction of 6.0 mol of NO2 if there is a 61.1% yield in the reaction
Answer:
2.0 × 10² g
Explanation:
Step 1: Write the balanced equation
2 NO₂ + 0.5 O₂ ⇒ N₂O₅
Step 2: Calculate the theoretical yield, in moles, of N₂O₅
The molar ratio of NO₂ to N₂O₅ is 2:1.
6.0 mol NO₂ × 1 mol N₂O₅/2 mol NO₂ = 3.0 mol N₂O₅
Step 3: Calculate the theoretical yield, in grams, of N₂O₅
The molar mass of N₂O₅ is 108.01 g/mol.
3.0 mol × 108.01 g/mol = 3.2 × 10² g
Step 4: Calculate the real yield, in grams, of N₂O₅
real yield = theoretical yield × percent yield
real yield = 3.2 × 10² g × 61.1% = 2.0 × 10² g
The combustion of gasoline produces carbon dioxide and water. Assume gasoline to be pure octane (C8H18) and calculate the mass (in kg) of carbon dioxide that is added to the atmosphere per 1.0 kg of octane burned
Answer:
3.1 kg
Explanation:
Step 1: Write the balanced combustion equation
C₈H₁₈ + 12.5 O₂ ⇒ 8 CO₂ + 9 H₂O
Step 2: Calculate the moles corresponding to 1.0 kg of C₈H₁₈.
The molar mass of C₈H₁₈ is 114.23 g/mol.
1.0 × 10³ g × 1 mol/114.23 g = 8.8 mol
Step 3: Calculate the moles of CO₂ produced from 8.8 moles of C₈H₁₈
The molar ratio of C₈H₁₈ to CO₂ is 1:8. The moles of CO₂ produced are 8/1 × 8.8 mol = 70 mol.
Step 4: Calculate the mass corresponding to 70 moles of CO₂
The molar mass of CO₂ is 44.01 g/mol.
70 mol × 44.01 g/mol = 3.1 × 10³ g = 3.1 kg
PLS HELP!!
Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.
Answer:
See explanation
Explanation:
An electrolytic cell functions by a non spontaneous chemical process. Energy is supplied in the form of electricity through a battery to drive the electrochemical process.
A voltaic cell functions by a spontaneous chemical process. Energy or work can be derived from a voltaic cell.
When iron is rusting, a natural voltaic cell is set and the iron is converted to hydrated iron III hydroxide. The set up used for the extraction of sodium metal from brine functions on the basis of electrolysis.
What mass of barium sulfate (233 g/mol) is produced when 125 mL of a 0.150 M solution of barium chloride is mixed with 125 mL of a 0.150 M solution of iron(III) sulfate
Answer:
4.37 g of barium sulphate
Explanation:
The reaction equation is;
3BaCl2(aq) + Fe2(SO4)3(aq) ---->3 BaSO4(s) + 2FeCl3(aq)
From the question, the number of moles of both barium chloride and FeSO4 = 125/1000 L × 0.150 M = 0.01875 moles
To find the limiting reactant;
3 moles of barium chloride yields 3 moles of barium sulphate
0.01875 moles of barium chloride yields 3 × 0.01875 moles/3 = 0.01875 moles of barium sulphate
1 mole of iron III sulphate yields 3 moles of barium sulphate
0.01875 molesof iron III sulphate yields 0.01875 moles ×3/1 = 0.05625 moles of barium sulphate
Hence,barium chloride is the limiting reactant
Amount of barium sulphate produced = 0.01875 moles × 233 g/mol = 4.37 g of barium sulphate
Below are descriptions of different center voids of a solid fuel. Which design
shape will generate the most thrust?
A. A heart
OB. A circle
C. A triangle
O D. A tree with branches
B. A circle.
The center void shape that generates the most thrust in a solid fuel rocket is a circle.
What is Fuel?
Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.
This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.
Learn more about Fuel from the given link
https://brainly.com/question/10172005
#SPJ1
Answer:
Explanation:
D.
tree with branches
What is the HCPCS Level II code for the compounded concentrated form of 0.5 mg Levalbuterol HCL when inhaled
Answer:
aefhfcjd
Explanation:
How is each nucleotide different from the others?
A. It has different bases.
B. It has different side chains.
C. It has different carboxyl groups.
D. It has different amine groups.
Answer:
a. po tamang sagot
Explanation:
pa pafoolow po pleasr
The DNA and RNA are polynucleotides which contain a chain of nucleotides monomers with different nitrogenous bases. Each nucleotide different from the others, as It has different bases. The correct option is A.
What is a nucleotide?A nucleotide is defined as a compound containing three component units, namely a pentose sugar (either ribose or 2-deoxyribose), a heterocyclic nitrogenous base (a substituted purine or a substituted pyrimidine) and a phosphate group.
The nucleotides are the phosphate esters of nucleosides. A nucleotide containing ribose as the sugar unit is termed as the ribonucleotide. While one containing 2-deoxyribose as the sugar unit is termed as the deoxyribonucleotide.
The nitrogenous bases in RNA are adenine, guanine, cytosine and uracil whereas in DNA the bases are adenine, guanine, cytosine and thymine. The purines are adenine and guanine whereas cytosine, thymine and uracil are pyrimidines.
Thus the correct option is A.
To know more about nucleotide, visit;
https://brainly.com/question/28178584
#SPJ7
What is octyne?
O A. An alkane
B. An alkyne
C. A polymer
D. An alkene
SUBMIT
Answer:
B. An alkyne
Explanation:
Octynes are alkynes with one triple bond
In electrolysis of sodium chloride, hydrogen and chlorine are liberated from the aqueous sodium chloride solution. Both the gases are transferred into a container which is maintained at 4 atm and 30 ℃. Calculate the volume of the container if 100 mol of H2 and 100 mol of Cl2 are transferred
Answer:
1.2 × 10³ L
Explanation:
Step 1: Calculate the total number of gaseous moles
n = nH₂ + nCl₂ = 100 mol + 100 mol = 200 mol
Step 2: Convert 30 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 30 + 273.15 = 303 K
Step 3: Calculate the volume of the container
We will use the ideal gas equation.
P × V = n × R × T
V = n × R × T / P
V = 200 mol × (0.0821 atm.L/mol.K) × 303 K / 4 atm = 1.2 × 10³ L
What is the basic difference between exergonic and endergonic reactions? Group of answer choices Exergonic reactions release energy; endergonic reactions absorb it. Exergonic reactions involve ionic bonds; endergonic reactions involve covalent bonds. Exergonic reactions involve the breaking of bonds; endergonic reactions involve the formation of bonds. In exergonic reactions, the reactants have less chemical energy than the products; in endergonic reactions, the opposite is true.
Answer: the basic difference is Exergonic reactions release energy and an endergonic reactions absorb energy .
HOPE THIS HELPS!!!
aseous methane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 5.5 g of methane is mixed with 13.9 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
There is 9.6 grams of CO2 produced
Explanation:
Step 1: Data given
Mass of methane = 5.50 grams
Molar mass of methane = 16.04 g/mol
Mass of oxygen = 13.9 grams
Molar mass of oxygen = 32.0 g/mol
Step 2: The reaction
CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
Step 3: Calculate number of moles
Moles = mass / molar mass
Moles methane = 5.50 grams / 16.04 g/mol
Moles methane = 0.343 moles
Moles oxygen = 13.9 grams / 32.0 g/mol
Moles oxygen = 0.434 moles
For 1 mol CH4 we need 2 moles O2 to produce 1 mol CO2 and 2 moles H2O
O2 is the limiting reactant. It will completely react (0.434 moles).
There will react 0.434/2 = 0.217 moles CH4
There will remain 0.343-0.217 = 0.126 moles CH4
There will be produced 0.434 moles of H2O and
0.434/2 =0.217 moles of CO2
Step 4: Calculate mass of products
Mass = moles * molar mass
Mass CO2 = 0.217 moles ¨44.01 g/mol
Mass CO2 = 9.6 grams
Mass H2O = 0.434 moles * 18.02
Mass H2O = 7.8 grams