Answer:
digital signal
Answer:
Its made of numbers
Explanation:
did the assignment, hope this helps :]
based on the electron configuration of the two atoms predict the ratio of metal cationic (+) atom to nonmetal anionic (-) atom in the compound. hydrogen and fluorine
The metal cationic (+) atom to nonmetal anionic (-) atom ratio in the compound formed between hydrogen and fluorine is 1:1.
What is a compound?A compound is madeup of two or more atoms that are chemically combined together. In this case, we have the atoms; hydrogen and fluorine.
The electronic configuration of the atoms are not shown here but the metal cationic (+) atom to nonmetal anionic (-) atom ratio in the compound formed between hydrogen and fluorine is 1:1.
Learn more about chemical compound: https://brainly.com/question/12166462
What is the chemical name
for ca2 and clo3-
Answer:
Calcium chlorate | Ca(ClO3)2 - PubChem.
Explanation:
what is safe storage of produced materials exlain long
Answer:
Stacking storage sacks/ bags by interlocking, and placing heavier object on lower shelves.
Explanation:
Not sure what you meant exactly, but this is my best guess.
Why is the electron configuration for copper 1 s 2 2 s 2 2 p 6 3 s 2 3 p 6 3 d 10 4 s 1 instead
of 1 s 2 2 s 2 2 p 6 3 s 2 3 p 6 3 d 9 4 s 2 ?
A The 4 s orbital has higher energy than the 3 d orbital.
B Electrons occupy orbitals of the highest energy levels first.
C A filled sublevel is more stable than a half-filled sublevel.
You open the refrigerator and take out a slice of leftover pizza. You put it in the microwave oven, turn it on, and watch for the cheese to start bubbling. You take a bite of the pizza and realize it is too hot, so you let it sit on the counter for a minute. When the pizza is finally cool enough to eat, you enjoy your lunch. Identify three examples of energy transfer in the scenario.
Pick up to 3 answers.
A. Electromagnetic (microwave) energy is transferred from the refrigerator to the pizza in the refrigerator.
B. Electromagnetic (microwave) energy is transferred from the microwave to the pizza in the microwave oven.
C. Heat energy is transferred from the pizza to the room as the pizza cools on the counter.
D. Heat energy from the warm pizza is transferred from the pizza into the mouth chewing it.
E. Heat energy from the room is transferred into the pizza as it comes out of the microwave oven.
Answer:
C,B,(D or A)
Explanation:
A solution consists of 35.00 g of CuSO4 dissolved in 250.0 mL of water. The molar mass of Cu is 63.55 g/mol the molar mass of S is 32.07 g/mol, and the molar mass of O is 16.00 g/mol. What is the molarity of the solution?
Answer:
0.87708moldm-3
Explanation:
[tex]molar \: mass \: of \: cuso4 = 63.55 + 32.07 + 4(16.00) \\ =159.62gmol {}^{ - 1} \\ mole(n) = \frac{mass}{molar \: mass } \\ n = \frac{35}{159.62} \\ n = 0.21927mol \\ molarity = \frac{n}{v} \\ molarity = \frac{0.21927}{0.25} \\ molarity = 0.87708moldm {}^{ - 3} [/tex]
If 22.00 mL of 2.00 M potassium iodide is needed to reach the equivalence point with 18.00 mL of lead (II) nitrate, determine the molarity of the lead (II) nitrate solution. Note: First write the balance equation between potassium iodide and lead (II) nitrate.
The molarity of the lead(II) nitrate solution if 22.00 mL of 2.00 M potassium iodide is needed to reach the equivalence point with 18.00 mL of lead (II) nitrate is 1.2M.
How to calculate molarity?The molarity of a solution can be calculated using the following formula:
CaVa/CbVb = na/nb
Where;
Ca = concentration of acidCb = concentration of baseVa = volume of acidVb = volume of basena = number of moles of acidnb = number of moles of baseThe balanced equation of the reaction is as follows:
Pb(NO3)2 (aq) + 2KI (aq) → 2KNO3 (aq) + PbI2 (s)
22 × 2/18 × Cb = 2/1
44/18Cb = 2
Cb = 44 ÷ 36
Cb = 1.2M
Therefore, the molarity of the lead(II) nitrate solution if 22.00 mL of 2.00 M potassium iodide is needed to reach the equivalence point with 18.00 mL of lead (II) nitrate is 1.2M.
Learn more about molarity at: https://brainly.com/question/356585
(113) Fe, Co, and Ni are in a category of metals best known as
(A) Transition metals
(B) Alkali metals
(C) Rare metals
(D)Main group metals
(
Answer:
A
Explanation:
iron, cobalt and nickel are all transition metals
What is the percent of oxygen by mass in C2H402
Answer:
53.3 %.
Explanation: C2H4O2. = 2 * 12.011 + 4 * 1.008 + 2 * 15.999. = 60.052.
please help and show work will be picking brainliest
Answer:
34x4v
Explanation:
ik it is write
When a sodium atom becomes an ion, the size of the atom
A
decreases by losing an electron,
B
decreases by gaining an electron,
с
increases by losing an electron,
D
increases by gaining an electron,
write an equation to show the effect of heat on the nitrate of silver
Answer:
2AgNO³(l) → 2Ag(s) + O²(g) + 2NO²(g)
Explanation:
I used powers ³,²,²
So change them to be down
Ozone has a molecular formula of O3. If 7.92*1024 atoms of oxygen react to form ozone, how many
moles of ozone would be produced?
337.92 moles of Ozone will be produced
1 Oxygen atom is 8 g
1 mole of ozone, O3 = 8 * 3 = 24 g
7.92 * 1024 = 8110.08 g
1 mole = 24 g
? moles = 8110.08 g
? = 337.92 moles
Read more on moles here:
https://brainly.com/question/15356425
Hope it helps
Ozone has a molecular formula of O3. If 7.92*1024 atoms of oxygen react to form ozone, then 337.92 moles of ozone will produce.
What is molecular formula?Molecular formula is defined as an expression that defines a number of atoms of each element in one molecule of a compound.
It can also be defined as a chemical formula that gives the total number of atoms of each elements in each molecules of a substance.
Ozone is defined as a highly reactive gas composed of three oxygen atoms and form a layer above the earth surface called as ozone layer.
1 oxygen atom = 8 g
1 mole of ozone = 8 x 3 = 24 g
7.92 x 10²⁴ = 8110.08 g
24 g = 1 mole
So, 8110.08 g = 337.92 moles
Thus, Ozone has a molecular formula of O3. If 7.92*1024 atoms of oxygen react to form ozone, then 337.92 moles of ozone will produce.
To learn more about molecular formula, refer to the link below:
https://brainly.com/question/28647690
#SPJ2
Which of the following mainly drives surface runoff?
A. magnetism
B. gravity
C. electricity
D. thermal energy
Which statement is true about precipitation in biomes around the world.
Question 6 options:
The taiga has more precipitation than the deciduous forest biome.
Deciduous forest biome is second in precipitation to the tropical rainforests.
Coniferous forest biome has more precipitation to the Deciduous forest biome.
The desert biome has more precipitation to the Deciduous forest biome.
Answer:
i want to say it's
Explanation:
(B) but i don't know but did you ever figure out the anwser?
Answer:
Coniferous forest biome has more precipitation to the Deciduous forest biome.
Explanation:
balancing equation plsss help
Answer:
The formula is : C3H8 + 5O2 → 3CO2 + 4H2O.
Explanation:
good luck
As you move from left to right in the third period of the periodic table…
A. Each group loses an outer electron
B. Each group gains an outer electron
C. Each group gains a neutron
D. The number of outer electrons remains constant across the period
Answer:
B
Explanation:
2.8.1 Na
2.8.2 Mg
and so on and so forth
A 23.6 g sample of NagPO4 (molar mass 163.94 g/mol) is dissolved in enough water to produce
g
750. mL of solution.
Calculate the concentration of Nations in solution.
Taking into account the definition of molarity, the concentration of Na₃PO₄ in solution is 0.192[tex]\frac{moles}{lliter}[/tex].
Definition of molarityMolar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:
[tex]Molarity=\frac{number of moles}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{lliter}[/tex].
Concentration of Na₃PO₄ in solutionBeing the molar mass of Na₃PO₄ 163.94 g/mole, that is, the amount of mass that a substance contains in one mole, the amount of moles that contains 23.6 g sample of Na₃PO₄ is calculated as:
[tex]23.6 gramsx\frac{1 mole}{163.94 grams} = 0.144 moles[/tex]
Then you know:
number of moles= 0.144 molesvolume= 750 mL= 0.750 L (being 1000 mL= 1 L)Replacing in the definition of molarity:
[tex]Molarity=\frac{0.144 moles}{0.750 L}[/tex]
Solving:
Molarity= 0.192[tex]\frac{moles}{lliter}[/tex]
Finally, the concentration of Na₃PO₄ in solution is 0.192[tex]\frac{moles}{lliter}[/tex].
Learn more about
molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
molar mass:
brainly.com/question/5216907
brainly.com/question/11209783
brainly.com/question/7132033
brainly.com/question/17249726
Which of the compounds below will dissociate in water? Check all that apply.
Ba(NO3)2
CaSO4
CO2
H2CO3
Mg3(PO4)2
those numbers are subscripts
An ionic compound does dissociate to a large extent in water. The compound that will completely dissociate in water here is Ba(NO3)2.
What is a soluble compound?A soluble compound is a compound that can dissociate to a large extent in water. Not all compounds are soluble in water. Only ionic compounds are soluble in water.
The compound that would dissolve in water among the list of compounds here is Ba(NO3)2.
Learn more about ionic compounds: https://brainly.com/question/9167977?
Answer:
A) Ba(NO3)2
B) CaSO4
C) CO2
D) H2CO3
E) Mg3(PO4)2
Explanation:
Wish I could give a good explanation, but I am still learning myself. Try searching up a video explaining this concept!
Identifying My Interests
List five activities that you enjoy
Answer:
BIKE riding, Watching yt, Hanging with friends, Food,Dogs
Which bond links amino acids together?
glycosidic bond
hydrogen bond
phosphodiester bond
peptide bond
Answer:
Peptide Bonds
Explanation:
Peptide bonds are formed by a biochemical reaction that extracts a water molecule as it joins the amino group of one amino acid to the carboxyl group of a neighboring amino acid.
Question 13 options:
A) What is the volume (L) of 2.5 moles of oxygen at STP?
B) What is the volume (L) of 2.5 moles of nitrogen at STP?
At STP
one mol of oxygen weighs=22.4LNo of moles=2.5mol
Total volume:-
2.5(22.4)56Lwhy are hydrocarbons insoluble in water
Answer:
Hydrocarbons are insoluble in water because they are non-polar compounds while water is a polar solvent. By principle, like dissolves like. Nonpolar solvents dissolve nonpolar solutes and polar solvents dissolve polar solutes.
Explanation:
please brainliest me
hope it helps
Hydrocarbons are insoluble in water because :-
1)Hydrocarbons are nonpolar whereas water is polar. (like dissolves like).
2) Hydrocarbons and water do not exhibit appropriate solvent-solute interactions. Hydrocarbons only form very weak dispersion forces whereas water produces strong polar hydrogen bonding interactions.
Explanation:
Hope it helps you!!
If a metal reacts violently with water, in which group is it likely to be found?
Answer:
Alkali metals (Li, Na, K, Rb, Cs, and Fr)
Explanation:
Answer:
Group 1
Explanation:
Alkali metals such as (Lithium, Sodium, Rubidium, Francium, Cesium, etc.) react violently with waterThey are termed "alkali" due to their nature of forming hydroxides on reacting with waterCalculate the pOH for a solution that has a hydroxide ion, (OH-) concentration of 5.02 X 10-4 M.
Calculate the pH.
Note: the answers should have three significant figures
Answer:
Explanation:
Calculate the pOH for a solution that has a hydroxide ion, (OH-) concentration of 5.02 X 10-4 M.
Calculate the pH.
Note: the answers should have three significant figures
What are the characteristics of nonvascular plants? (select all that apply) A . They don’t rely on roots to receive water.
B .They have xylem vessels and phloem vessels
C . They are able to push water and nutrients to each part of the plant.
D . They are found in moist environments.
Answer:
D . They are found in moist environments.
Explanation:
Nonvascular plants do not have a xylem or phloem, roots, stems, or leaves. Because these plants lack water-conducting tissues, they fail to achieve the structural complexity and size of most vascular plants and have evolved in habitats which allow their survival and reproduction.
The plant body that is most obvious in non-vascular plants are the the gametophyte generation. The gametophte gemeration is haploid.
The non-vascular plants grow in moist environments. It is due to lack of vascular tissue that requires to maintain close contact with water to prevent desiccation. Nonvascular plants are plants that do not have any special internal pipelines or channels to carry water and nutrients. Instead, nonvascular plants absorb water and minerals directly through their leaflike scales. Nonvascular plants are usually found growing close to the ground in damp, moist places. Non-vascular plants thrive in damp conditions since they don't need to rely on roots to acquire enough water.
Ignoring the contributions of wind, a baseball would be expected to travel farther in warm, humid air because: Select one: a. water vapor helps to lift the baseball even higher. b. water vapor sticks to baseballs. c. water vapor is less dense than dry air. d. none of these
Answer:
water vapor is less dense than dry air
What type of energy transformation takes place during cellular respiration?
Use complete sentences to explain how energy is conserved during cellular respiration. (10 points)
Answer:
chemical energy transgormation takes place during cellular respiration
How many grams of Na2S will be produced if you react 35.0g sodium
2. The gas from an erupting volcano had the following composition: 494 torr CO₂, 0.054 atm HCI, 0.028 atm HF, 0.017 atm 50₂. 0.76 mmHg H₂5, and H₂. If the total pressure is 1.00 atm, what is the partial pressure of H₂?
3. When a 10L balloon is heated from 22.0°C to 97.0°C, to what volume does it inflate?
4. Calculate the pressure of a gas in a 205 mL container at 0.0°C when the container was initially at a volume of 300.0 mL and a pressure of 1.05 atm
Answer: The gas from an erupting volcano had the following composition: 494 torr CO₂, 0.054 atm HCI, 0.028 atm HF, 0.017 atm 50₂. 0.76 mmHg H₂5, and H₂. If the total pressure is 1.00 atm, what is the partial pressure of H₂?
Explanation: