Answer:
The question lacks options, the options are:
A) Energy is transferred to consumers, which convert it to nitrogen and use it to make amino acid
B) Energy from producers is converted into oxygen and transformed to consumers.
C) Energy from the sun is stored by green plants and transferred to consumers.
D) Energy is transferred to consumers, which use it to produce food.
The answer is C
Explanation:
Organisms obtain energy in an ecosystem by feeding on one another in a chain called FOOD CHAIN. Energy is transferred when one organism feeds on another. A food chain always begins with a PRODUCER, which is an autotrophic organism capable of producing its own food via light energy from the sun.
In a terrestrial ecosystem, the energy a plant captures via Its Chlorophyll is used to produce food during photosynthesis. This energy is stored in the plants and transferred when a set of organisms called PRIMARY CONSUMER feeds on the plant. The transfer continues in that order till decomposers.
Some building materials contain small capsules filled with paraffin wax to improve the insulating properties of the materials. The melting and freezing of paraffin inside the capsules in the material helps to regulate temperature. Paraffin wax begins to melt at 37°C37°C.(a) While the wax is melting, is the net flow of thermal energy from the wax to the surroundings or from the surroundings to the wax? Justify your answer.(b) Calculate the amount of thermal energy, in kJkJ, that is required to melt 15.215.2 grams of solid paraffin wax when the temperature of the surroundings is above the melting point of paraffin. (The molar mass of paraffin is 282.62g/mol282.62g/mol, and its molar heat of fusion is 48.78kJ/mol)(c) When paraffin wax melts, its density decreases. Provide a particle-level explanation of this observation.
Answer:
(a)
From surrounding to wax
(b)
Q = 2.62 KJ
(c)
Density of a substance is defined as the no. of particles of the substance, that occur in a unit volume. So, when the substance melts, the inter-molecular attractive forces and bonds between molecules or atoms are weakened. This, increases the distance between the molecules or atoms. Hence, the no. of particles in a unit volume is decreased. As, a result of this, the density of the substance also decreases.
Explanation:
(a)
During the melting process, the solid material or substance requires energy, in order to break the bonds between its molecules or atoms.
Therefore, while the wax is melting, the net flow of thermal energy is from surrounding to the wax.
(b)
The amount of energy required to melt solid paraffin wax is given by the formula:
Q = nC
where,
Q = amount of energy
C = Molar Heat of Fusion = 48.78 KJ/mol
n = No. of Moles = Mass in gram/Molar Mass = (15.2 g)/(282.62 g/mol)
n = 0.0538 mol
Therefore,
Q = (0.0538 mol)(48.78 KJ/mol)
Q = 2.62 KJ
(c)
Density of a substance is defined as the no. of particles of the substance, that occur in a unit volume. So, when the substance melts, the inter-molecular attractive forces and bonds between molecules or atoms are weakened. This, increases the distance between the molecules or atoms. Hence, the no. of particles in a unit volume is decreased. As, a result of this, the density of the substance also decreases.
(a) During the melting of wax, the flow of thermal energy has been from the surroundings to the wax.
(b) The amount of heat requires for the melting of 15.215 grams of solid paraffin has been 2.62 kJ.
(c) The density decreases due to a decrease in the number of molecules per unit volume.
(a) Melting results in the conversion of solid-state to the liquid state. This step requires energy. Thus, the flow of energy has been from the surroundings to the wax.
(b) Amount of heat requires (Q) can be given by:
Q = nC
Where, n = moles of the sample, and C = heat of fusion
Moles of paraffin = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Moles of paraffin = [tex]\rm \dfrac{15.215}{286.62}[/tex]
Moles of paraffin = 0.0538 moles
Q = 0.0538 [tex]\times[/tex] 48.78 kJ/mol
Q = 2.62 kJ.
The amount of heat requires for the melting of 15.215 grams of solid paraffin has been 2.62 kJ.
(c) The density has been the mass or number of particles present per unit volume. The melting of wax results in a weaker intermolecular force. The resulting liquid will have fewer molecules present in the unit volume.
Thus, the density decreases due to a decrease in the number of molecules per unit volume.
For more information about the heat of fusion, refer to the link:
https://brainly.com/question/14053504
In the
Preparation of ethene from ethanol and
tetraoxosulphate (vi) acid, state
the concentration of the acid.
Answer:
The acid must be a concentrated acid
Explanation:
Ethene is prepared in the laboratory by heating ethanol with excess concentrated tetraoxosulphate VI acid at 170°C . The reactionoccursc in two stages;
1) when the ethanol and sulphuric acid are mixed in a ratio of 1:2, ethyl hydrogentetraoxosulpate VI is formed
2) The compound formed in the first step is heated in the presence of excess concentrated sulphuric acid to give ethene and sulphuric acid.
The overall reaction can be perceived as the dehydration of ethanol. The gas produced (ethene) is usually passed through sodium hydroxide solution to remove any gaseous impurities present.
concentrated sulphuric acid is used in this process since it is a good dehydrating agent.
Which of the following atoms is the smallest?
Be
Ne
O
Li
B
Answer:
Li
Explanation:
The element, Neon (Ne), is the smallest among the given elements
From the question,
We are to determine which of the given elements is the smallest.
The given elements are
Be - Beryllium
Ne - Neon
O - Oxygen
Li - Lithium
B - Boron
From the periodic table, we can observe that all of the given elements belong to period 2.
Using the trend of atomic size on the periodic table,
We know that, atomic size decreases across the period.
This means, the atomic sizes of the elements will decrease in the order
Li > Be > B > O > Ne
Hence, the element, Neon (Ne), is the smallest among the given elements
Learn more here: https://brainly.com/question/16153450
HURRRYYYY
Based on the chemical equation, use the drop-down menu to choose the coefficients that will balance the chemical equation:
()CaSO4 → ()O2 + ()CAS
Answer:
1, 2, 1
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
Answer:
1,2,1
Explanation:
just did the assigment
A _____ is a fracture or break in Earth's surface.
A FAULT is a fracture or break in Earth's surface
where does the chemical reaction take during photosynthesis
Answer:
in all green plants and most algae
How could weathering by release of pressure affect the amount of weathering by freezing and thawing?
The amount of weathering by the freezing and thawing process of water is the most effective weathering.
What is weathering?Weathering is a process in which breaking or dissolving of rocks and minerals present on the earth surface.
Freezing and thawing weathering is a kind of physical weathering in which water goes down to the pores of rock and gets freeze and expands and causes breaking of rocks.Release of pressure also result in the weathering of the underlying rocks.Weathering by the freezing effect of water causes more effect on the breaking as compare to the pressure release weathering.
Hence Freezing & thawing weathering is most powerful weathering.
To know more about weathering, visit the below link:
https://brainly.com/question/6996995
The British gold sovereign coin is an alloy of gold and copper having a total mass of 7.988 g, and is 22-karat gold.
(a) Find the mass of gold in the sovereign in kilograms using the fact that the number of karats = 24× (mass of gold)/ total mass.
(b) Calculate the volumes of gold and copper, respectively, used to manufacture the coin.
(c) Calculate the density of the British sovereign coin.
Answer:
(a) [tex]m_{gold}=7.322g[/tex]
(b)
[tex]V_{gold}=0.379cm^3[/tex]
[tex]V_{copper}=0.122cm^3[/tex]
(c) [tex]\rho _{coin}=15.94g/cm^3[/tex]
Explanation:
Hello,
(a) In this case, with the given formula we easily compute the mass of gold contained in the sovereign as shown below:
[tex]m_{gold}=\frac{m_{tota}*karats}{24}=\frac{7.988g*22}{24}=7.322g[/tex]
(b) Now, by knowing the density of gold and copper, 19.32 and 8.94 g/cm³ respectively, we compute each volume, by also knowing that the rest of the coin contains copper:
[tex]V_{gold}=\frac{m_{gold}}{\rho_{gold}} =\frac{7.322g}{19.32g/cm^3}=0.379cm^3[/tex]
[tex]m_{copper}=7.988g-7.322g=1.09g\\V_{copper}=\frac{m_{copper}}{\rho_{copper}}=\frac{1.09g}{8.94g/cm^3} \\\\V_{copper}=0.122cm^3[/tex]
(c) Finally, the volume is computed by dividing the total mass over the total volume containing both gold and copper:
[tex]\rho _{coin}=\frac{m_{total}}{V_{gold}+V_{copper}}=\frac{7.988 g}{0.379cm^3+0.122cm^3}\\ \\\rho _{coin}=15.94g/cm^3[/tex]
Best regards.
Answer:
a
The mass of gold is [tex]L = 7.322 *10^{-3} \ kg[/tex]
b
The volumes of gold and copper is [tex]V_g = 3.794 *10^{-7} \ m^3[/tex] , [tex]V_c = 7.426 *10^{-8} \ m^3[/tex]
c
The density of the British sovereign coin
[tex]\rho = 17.593*10^{3} \ kg/m^3[/tex]
Explanation:
From the question we are told that
The total mass of the gold is [tex]K = 7.988 \ g = 7.988 * 10^{-3} \ kg[/tex]
The karat of the British gold sovereign is [tex]z = 22[/tex]
Let the mass of gold in the alloy be L
Now we are told that
[tex]z = 24 * \frac{L}{K}[/tex]
substituting value
[tex]22 = 24 * \frac{L}{7.988 * 10^{-3}}[/tex]
So [tex]L = \frac{22}{24} * 7.899*10^{-3}[/tex]
[tex]L = 7.322 *10^{-3} \ kg[/tex]
The volume of the gold coin is mathematically represented as
[tex]V_g = \frac{L}{\rho_g }[/tex]
Where [tex]\rho_g[/tex] is the density of the gold which a constant with value
[tex]\rho_g = 19.3 *10^{3} \ kg /m^3[/tex]
So
[tex]V_g = \frac{7.322 *10^{-3}}{19.3 *10^{3} }[/tex]
[tex]V_g = 3.794 *10^{-7} \ m^3[/tex]
The mass of copper is mathematically evaluated as
[tex]m_c = K - L[/tex]
[tex]m_c = 7.988*10^{-3} - 7.322 *10^{-3}[/tex]
[tex]m_c = 6.657 *10^{-4} \ kg[/tex]
Volume of the copper is
[tex]V_c = \frac{m_c}{\rho_c}[/tex]
Where [tex]\rho_c[/tex] is the density of the copper which a constant with value
[tex]\rho_c = 8.92 * 10^{3} \ kg/m^3[/tex]
So
[tex]V_c = \frac{6.657 *10^{-4}}{8.92 *10^{3}}[/tex]
[tex]V_c = 7.426 *10^{-8} \ m^3[/tex]
The total volume of the British gold sovereign coin is \
[tex]V = V_g + V_c[/tex]
substituting values
[tex]V = 3.7939 *10^{-7} + 7.4626 *10^{-7}[/tex]
[tex]V = 4.54 *10^{-7} \ m^3[/tex]
The density of the British gold sovereign coin is
[tex]\rho = \frac{K}{V}[/tex]
substituting values
[tex]\rho = \frac{7.988 *10^{-3}}{4.54 *10^{-7}}[/tex]
[tex]\rho = 17.593*10^{3} \ kg/m^3[/tex]
Someone pls help me, I need the answer ASAP!!
Pure A (liq) has vapour pressure at 421 K is 80.1 kPa, and pure B (liq) is 61.2 kPa. The two substance form ideal liquid and gaseous mixtures. If the equilibrium composition of a mixture is established, in which the mole fraction of A in the vapour is 0.410, Calculate:
(a) The total pressure of the vapour.
(b) The composition of the liquid mixture.
Answer:
a) Total vapor pressure = 68.948 Kpa
b) Mole fraction of A = 41%, mole fraction of B = 59%
Explanation:
Find the given attachments.
By means of a schematic diagram show how a bacteria cell applied to the region of a cowpea root can end up by becoming a nitrate ion which can be absorb by a subsequent crop.
Answer:
Nitrifying bacterium such as nitrosomonas or nitrobacter, whe applied to the soil, convert free ammonia or nitrogen to nitrates through oxidation. They are a group of aerobic bacteria playing an important role in the nitrogen cycle as producers of energy from inorganic source.
The schematic diagram attached summaries the action of such bacteria.
Balance the equation below, using the smallest whole-number coefficients. ____Fe(s) + ____ O2(g) + ____ H2O(l) → ____Fe(OH)2(s)
Answer:
2Fe(s) + O₂(g) + 2H₂O(l) → 2Fe(OH)₂(s)
Explanation:
Balanced equation willl be:
[tex]2Fe(s) + O_2(g) + 2H_2O(l) - > 2Fe(OH)_2[/tex]
What is balance equation with example?A balanced chemical equation occurs when the number of the atoms involved in the reactants side is equal to the number of atoms in the products side. In this chemical reaction, nitrogen (N2) reacts with hydrogen (H) to produce ammonia (NH3). The reactants are nitrogen and hydrogen, and the product is ammonia.
What is the rule of balance?On a separate sheet of paper, make a claim in which you mathematically state the rule of balance - that is, the rule that one must use to determine if two weights placed on opposite sides of the fulcrum will balance each other.
Learn more about Balacing a Chemical Equation here
https://brainly.com/question/26227625
#SPJ2
if 84.9 grams of solid iron reacts with oxygen gas, how many molecules of oxygen will react
Answer:
Molecules of oxygen [tex]= 6.86 * 10^{23}[/tex]
Explanation:
The balanced equation of reaction between iron and oxygen is
4 Fe + 3 O2 → 2 Fe2O3
4 moles of iron react with 3 moles of oxygen.
Mass of one mole of iron is 55.845
number of iron moles in 84.9 grams of solid iron is equal to
[tex]\frac{84.9}{55.845} \\= 1.52[/tex]
Now 1 mole of iron will react with [tex]\frac{3}{4} = 0.75[/tex] mole of oxygen
Thus 1.52 moles of iron will react with [tex]0.75 * 1.52 = 1.14[/tex] moles of oxygen
Number of atoms of oxygen in 1.14 moles
[tex]1.14* 6.02 * 10^{23}\\[/tex]
[tex]= 6.86 * 10^{23}[/tex]
Complete the table:
Mass Solute Mass Solvent Mass Solution Mass Percent
2.65 g 26.0 g _____ _____
_____ 46.8 g _____ 4.0 %
1.68 g _____ 26.2 g _____
26.7 g _____ _____ 5.9 %
Answer:
1.
Mass solution = 28.65 g
Mass percent = 9.14 %
2.
Mass solute = 1.95 g
Mass solution = 48.75 g
3.
Mass solvent = 24.52 g
Mass percent = 6.41 %
4.
Mass solution = 476.8 g
Mass solvent =450.1 g
Explanation:
Hello,
In this case, we define the mass percent as:
[tex]\%m/m=\frac{m_{solute}}{m_{solute}+m_{solution}} *100\%[/tex]
Wherein we use the mass of the solute and the mass of the solvent in order to compute it, thus, for each case we have:
1.
Mass solution: 2.65 g + 26.0 g = 28.65 g
Mass percent: 2.62 g / (2.65 g + 26.0 g) x 100% = 9.14 %
2.
Mass solute: 4.0 % x 46.8 g / (1 - 4.0 %) = 1.95 g
Mass solution: 1.95 g + 46.8 g = 48.75 g
3.
Mass solvent: 26.2 g - 1.68 g = 24.52 g
Mass percent: 1.68 g / (1.68 g + 24.52 g) x 100% = 6.41 %
4.
Mass solution: 26.7 g / 5.6 % = 476.8 g
Mass solvent: 476.8 g - 26.7 g =450.1 g
Best regards.
Answer:
20.9
Explanation:
A gas occupies 10.00L at 100k and exerts a pressure of 1.71atm. What volume, in liters, will the gas occupy if the temp is increased to 290.29K and the pressure is increased to 9.70atm?
Answer:
5.12 L
Explanation:
P1V1/T1 = P2V2/T2
1.71 atm *10.0L /100 K = 9.70 atm *x/290.29 K
x = 1.71 atm *10.0L*290.29K /(100 K * 9.70 atm)= 5.12 L
What is the difference between a strong electrolyte and a weak electrolyte
Answer:
One will give you more energy and the other will make you tired!
Explanation:
CHEM EXPERT NEEDED***
A volume of 150.0 mL of H2O is initially at 24.00 °C. A chilled steel rod at 2.50 °C is placed in the water and the final temperature of the system is 21.20 °C.
Specific heat of water = 4.184 J/(g⋅∘C) and the specific heat of steel = 0.452 J/(g⋅∘C)
Write the equation and calculate the mass of the rod.
Answer:
1. m₁C₁ΔT₁ + m₂C₂ΔT₂ = 0
2. 207 g
Explanation:
This is a problem in calorimetry — the measurement of the quantities of heat that flow from one object to another.
It is based on the Law of Conservation of Energy — Energy can be transformed from one type to another, but it cannot be destroyed or created.
If heat flows out of one object, the same amount of heat must flow into another object.
Since there is no change in total energy,
Heat₁ + heat₂ + heat₃+ … = 0
The symbol for the quantity of heat transferred is q, so we can rewrite the word equation as
q₁ + q₂ + q₃ + … = 0
The formula for the heat absorbed or released by an object is
q = mCΔT, where
m = the mass of the sample
C = the specific heat capacity of the sample, and
ΔT = T_f - T_i = the change in temperature
1. Equation
There are two heat flows in this problem,
Heat from steel rod + heat absorbed by water = 0
q₁ + q₂ = 0
m₁C₁ΔT₁ + m₂C₂ΔT₂ = 0
2. Data:
m₁ = ?; C₁ = 0.452 J°C⁻¹g⁻¹;T_f = 21.20 °C; T_i = 2.50 °C
V₂ = 150.0 mL; C₂ = 4.184 J°C⁻¹g⁻¹; T_f = 21.20 °C; T_i = 24.00 °C
3. Calculations
(a) m₂
The density of water is 0.9982 g/mL, so
m₂ = 150.0 mL × 0.9982 g/mL = 149.7 g
(b) Temperature changes
[tex]\Delta T_{1} = T_{\text{f}} - T_{\text{i}} = 21.20 \, ^{\circ}\text{C} - 2.50 \, ^{\circ}\text{C} = 18.70 \, ^{\circ}\text{C}\\\Delta T_{2} = T_{\text{f}} - T_{\text{i}} = 21.20 \, ^{\circ}\text{C} - 24.00 \, ^{\circ}\text{C} = -2.80 \, ^{\circ}\text{C}[/tex]
(c) q₁
q₁ = m₁C₁ΔT₁ = m₁ × 0.452 J°C⁻¹g⁻¹ × 18.70 °C = 8.452m₁ J·g⁻¹
(d) q₂
q₂ = m₂C₂ΔT₂ = 149.7 g × 4.184 J°C⁻¹g⁻¹ × (-2.80 °C) = -1754 J
(e) m₁
[tex]\begin{array}{rcl}q_{1} + q_{2} & = & 0\\8.452m_{1} \, \text{J}\cdot\text{g}^{-1} + (-\text{1754 J}) & = & 0\\8.452m_{1}\,\text{g}^{-1} - 1764 &=& 0\\m_{1} & = & \dfrac{1764}{8.452 \,\text{g}^{-1}}\\\\ & = & \textbf{207 g}\\\end{array}\\\text{ The mass of the steel rod is $\large \boxed{\textbf{207 g}}$}[/tex]
Among nonmetals,which nonmetal is most likely to form a covalent bond?
Answer:
most common non metal is chlorine
What is the molarity of a solution containing 0.05 moles of solute in 0.25L of solution?
Answer:
0.2 M
Explanation:
The molarity is the number of moles per liter:
(0.05 moles)/(0.25 liter) = 0.2 moles/liter = 0.2 M
For many purposes we can treat propane as an ideal gas at temperatures above its boiling point of . Suppose the temperature of a sample of propane gas is lowered from to , and at the same time the pressure is decreased by . Does the volume of the sample increase, decrease, or stay the same? increase decrease stays the same If you said the volume increases or decreases, calculate the percentage change in the volume. Round your answer to the nearest percent.
Answer:
See explaination
Explanation:
please kindly see attachment for the step by step solution of the given problem
Base your answers on the graph below, which represents uniform cooling of a sample of a pure substance, starting as a gas. The boiling point of the substance is
Answer:
120
Explanation:
Because it starts as gas at from A to B, B to C is gas and liquid equilibrium, so in order to go to boiling point (point where it goes from liquid to gas) it happens at 120 because after that you see that steep slope which represents the gas being formed.
The transition from liquid to gas, or the boiling point, occurs at 120 because after that you see that steep slope, which symbolizes the gas being formed. This is because the transition from liquid to gas, or the boiling point, occurs at 120 because it starts as a gas at A to B, B to C is gas and liquid equilibrium.
What is boiling point ?The temperature at which a liquid's vapor pressure equals the pressure around it and the liquid transforms into a vapor is known as the boiling point of a material. A liquid's boiling point changes according on the atmospheric pressure in the area.
A cooling curve is a line graph that depicts the transition of matter from one phase to another, usually from a liquid or gas to a solid. Time is an independent variable (X-axis), while temperature is a dependent variable (Y-axis).
Thus, the boiling point of the substance is 120° c.
To learn more about boiling point follow the link below;
https://brainly.com/question/2153588
#SPJ2
In the Bohr model of the hydrogen atom, the electron occupies distinct energy states. One transition between energy states of the hydrogen atom is represented by the picture on the left.
1. In this transition an electron moves from the n = level to the n = level.
2. Energy is_______ in this process.
A. Absorbed
B. Emitted
3. The electron moves ___________ the nucleus.
A. Closer to
B. Further from
Answer:
1. ELECTRON MOVES FROM THE n = 4 to n = 1 LEVEL
2. ENERGY IS EMITTED
3. THE ELECTRON MOVES CLOSER TO THE NUCLEUS
Explanation:
the question is incomplete as the picture is not shown but here is the picture and the solution.
Bohr model of the hydrogen atom shows that electrons would not emit energy but emit or absorb protons as it moves to a lower or higher energy levels respectively. In this question as shown in the picture below, the hydrogen atom moves from energy level 4 to energy level 1 and in such transition, energy is emitted and returns to its ground state after been excited to a higher level o n equals to 4. The energy emitted follows the law of conservation of energy. That is the amount of energy needed to excite the atom to a higher level is emitted upon transition back to the ground state.
The size of the hydrogen atom will also reduce and the electron will move closer to the nucleus. This is because as energy increases, the electron is found at a greater distance away from the nucleus and vice versa. And as the electron moves farther away the electrostatic force between it and the nucleus reduces and it is loosely held by the nucleus and vice versa, As the case of the question, the electron moves closer to the nucleus and it is strongly attached to the nucleus due to increase electrostatic attraction between it and the nucleus.
Answer:
In this transition, energy is emitted
The electron moves closer to the nucleus
Explanation:
In the Bohr's model of the atom, electrons occupy specific energy levels shown by the principal quantum number. An electron that is stationary in its orbit does not radiate energy.
However, an electron may absorb energy and be excited to higher energy levels or emit energy when descending from a higher to a lower energy level. This energy is usually observed as a photon of light of appropriate wavelength and frequency.
In the image, the electron descends from energy level n=4 to energy level n=1. Since it has moved from a higher to a lower energy level, energy is emitted. Recall that energy levels increase outwards from the nucleus. Since n=1 is closest to the nucleus, the electron has moved closer to the nucleus. Hence the answers above.
A barrel of water weighs 60 pounds. What must you put in it for it to weigh 40 pounds?
Answer:
A hole
Explanation:
put a hole in the barrel and let some water out
The thing you would add to the barrel would be holes which would cause water to fall out of the barrel.
What is a pound?Pound is defined as the basic unit for weight in the Foot Pound Second (F.P.S) system and is equal to 16 ounces.
An example of a pound is a man weighing 186 pounds.
The thing you would add to the barrel would be holes which would cause water to fall out of the barrel.
The amount of holes you would add and where you would add them would depend all on how much the barrel weighs without the water.
Learn more about the pounds here:
https://brainly.com/question/17408937
#SPJ2
Mr. Auric Goldfinger, criminal mastermind, intends to smuggle several tons of gold across international borders by disguising it as lumps of iron ore. He commands his engineer minions to form the gold into little spheres with a diameter of exactly and paint them black. However, his chief engineer points out that customs officials will surely notice the unusual weight of the "iron ore" if the balls are made of solid gold (density ). He suggests forming the gold into hollow balls instead, so that the fake "iron ore" has the same density as real iron ore. Calculate the required thickness of the walls of each hollow lump of "iron ore."
The given question is not complete, the complete question is:
Solving applied density problems Mr. Auric Goldfinger, criminal mastermind, intends to smuggle several tons of gold across International borders by disguising it as lumps of iron ore. He commands his engineer minions to form the gold into little spheres with a diameter of exactly 6 cm and paint them black However, his chief engineer points out that customs officials will surely notice the unusual weight of the "iron ore" if the balls are made of solid gold (density 19.3 g/cm'). He suggests forming the gold into hollow balls Instead (see sketch at right), so that the fake "Iron ore" has the same density as real iron ore (5.15 g/cm'). One of the balls of fake iron ore," sliced in half Calculate the required thickness of the walls of each hollow lump of iron ore. Be sure your answer has a unit symbol, if necessary, and round it to 2 significant digits.
Answer:
The correct answer is 0.29 cm.
Explanation:
To produce fake iron balls that is, formed of gold there is a need to make sure that the mass of the iron ball should be equivalent to the mass of the fake ball.
To calculate the volume of iron ball with the help of the given diameter, the formula to be used is 4/3πr³. The diameter of the spheres mentioned in the given question is 6 cm, so the radius will be 6/2= 3 cm.
Now, the volume of the iron ball would be = 4/3 × 3.14 × 3³ = 113.04 cm³
To determine the mass of the iron ball, the formula to be used is volume * density. Now putting the values we get,
113.04 × 5.15 g/cm³ = 582.156 grams (The density of the iron ore is 5.15 g/cm³)
Now, the mass of the gold ball should also be equal to 582.156 g. The density of the solid gold is 19.3 g/cm³, therefore, the volume of the gold ball by using the above formula would be,
mass of gold ball = Volume × density
Volume = mass of gold ball / density
Volume = 582.156 g / 19.3 g/cm³
= 30.1635 cm³
Thus, the volume of the hollow sphere would be 30.1635 cm³ with the outer radius as 3 cm, now there is a need to find the inner radius.
Volume of hollow ball = 4/3π [R³ -r³]
30.1635 cm^3 = 4/3 pie [3³ = r³]
30.1635 × 3/4 × 3.14 = 27-r³
7.2046 = 27-r³
r³ = 19.7954
r = 2.7051 cm
Hence, the thickness would be outer radius - inner radius = 3-2.7051 = 0.2949 cm or 0.29 cm.
Would you expect carboxylic acids with general formula CH3(CH2)nCOOH to become more or less water soluble as n increases? Explain.
Answer:
less soluble
Explanation:
As n increases, the non polar hydrocarbon tail increases in length, while there is only one polar carboxylic group at the end. Since only the carboxylic group can form hydrogen bond with water, and the non polar hydrocarbon tail cannot, the long tail will hinder the formation of hydrogen bond between acid and water molecules, hence solubility decreases.
The carboxylic acids with general formula CH3(CH2)nCOOH to become less water soluble as n increases.
What is carboxylic acid ?An organic acid that has a carboxyl group joined to an R-group is said to be carboxylic. A carboxylic acid's general formula is RCOOH or RCO2H, where R stands for an alkyl, alkenyl, aryl, or other group. Carboxylic acids are frequently present.
The carboxylic acids do not produce dimers when introduced to water. Instead, individual acid and water molecules create hydrogen bonds with one another. These interactions allow carboxylic acids to disintegrate in water to create acidic solutions.
Similar to how alcohols, aldehydes, and ketones are soluble in water, carboxylic acids are as well. Acids with fewer than five carbons dissolve in water; those with a higher molecular weight are insoluble because they include a greater proportion of hydrocarbons.
Thus, The carboxylic acids with general formula CH3(CH2)nCOOH to become less water soluble as n increases.
To learn more about carboxylic acid, follow the link;
https://brainly.com/question/15522377
#SPJ2
Question 1 When of alanine are dissolved in of a certain mystery liquid , the freezing point of the solution is lower than the freezing point of pure . On the other hand, when of iron(III) chloride are dissolved in the same mass of , the freezing point of the solution is lower than the freezing point of pure . Calculate the van't Hoff factor for iron(III) chloride in . Be sure your answer has a unit symbol, if necessary, and round your answer to significant digits.
Answer:
See explaination
Explanation:
please kindly see attachment for the step by step solution of the given problem
Use the drop-down menus to seled the correct responses to each question about ocean zones
In which zone do you find marshes and mangrove forests?
In vich zone are plan con plentiful, providing plenty of food for the fish that live there?
in which zone would you find very little plant or animal de compared to other zones?
Answer:
Intertidal zone
Neritic zone
Open-ocean zone
Note: the correct questions are found below;
In which zone do you find marshes and mangrove forests?
In which zone are plankton plentiful, providing plenty of food for the fish that live there?
In which zone would you find very little plant or animal life compared to other zones?
Explanation:
The intertidal zone, sometimes called the littoral zone, is the area of the marine shoreline that is exposed to air at low tide, and covered with seawater when the tide is high. Intertidal zonation refers to the tendency of plants and animals to form distinct communities between the high and low tide lines. Some microclimates in the littoral zone are moderated by local features and larger plants such as mangroves.
The neritic zone is the region of shallow water (200 meters depth) above the continental shelf where light penetrates to the sea floor.
Due to the abundant supply of sunlight and nutrients such as plankton in this zone, it is the most productive ocean zone supporting the vast majority of marine life.
The open oceans or pelagic ecosystems are the areas away from the coastal boundaries and above the seabed. It encompasses the entire water column and lies beyond the edge of the continental shelf. It extends from the tropics to the polar regions and from the sea surface to the abyssal depths.
Answer:
Intertidal zone
Neritic zone
Open-ocean zone
Explanation:
what structural units make up iconic solids
Answer:
the structural units are anions and cations bonded together by strong, non-directional ionic bonds
Use the periodic table to correctly describe the arrangement of electrons in an oxygen atom. Check all of the
boxes that apply.
Answer:
second option and last option
Explanation:
Know how to do an electron configuration. This is correct because it adds up to 8 and is in the correct order.
All valence electrons are in the last shell. In this case, 2p is the last shell.
Answer:
It's the second and the second to last
Explanation:
What diffuses faster: a gas sample into a vacuum container, or a gas sample into an air filled container?
Answer:
A gas sample into a vacuum diffuses faster than a gas sample into an air-filled container.
Explanation:
Diffusion
When a gas is introduced into a closed space, the molecules of the gas move freely and spread throughout the closed space.
The gas molecules tend to move from higher concentration to lower concentration area so that the concentration of gas throughout the closed space comes in equilibrium. This happens because higher concentration spaces have a greater number of gas molecules and vice-versa. In other words, gas molecules move towards the spaces having less concentration, i.e., they have a smaller number of gas molecules, and hence, can accommodate additional gas molecules.
This process of dispersion of gas molecules, as a result of difference in concentration, is called diffusion. The speed of diffusion is affected by the collisions suffered by the gas molecules.
When the molecules of gas disperse in any space, they have a tendency to travel in a straight line. In this process, they hit the molecules of other gases in the same space which causes a decrease in the speed of the molecules of gas hence, slowing the process of dispersion or diffusion.
Diffusion in air-filled container
When a gas is introduced into a closed container which is already filled with air, the molecules of the newly-introduced gas, as per their tendency, tend to move throughout the closed container irrespective of the concentration gradient.
Diffusion in a vacuum container
Whereas, in vacuum, the molecules of the introduced gas do not face any collisions with any molecules of other gas. The molecules of gas move freely until they collide with the sides of the container. The only collision occurring in a vacuum container is when the molecules hit the containers. Hence, gas diffusion takes place faster in a closed container having vacuum than a closed container which is already filled with air.
The number of atoms in exactly 12 grams of carbon-12 is called
The number of atoms which are present exactly in 12 grams of carbon-12 is called Avogadro's number.
What is Avogadro's number?Avogadro's number is the number of atoms which are present in 1 mole of any substance and it is equal to 6.022×10²³.
And moles will be calculated as:
n = W/M, whereW = given massM = molar massMoles of Carbon-12 = 12g / 12g/mol = 1mole
In 1 mole of Carbon-12 = 6.022×10²³ atoms are present.
Hence, the number of atoms in exactly 12 grams of carbon-12 is called Avogadro's number.
To know more about Avogadro's number, visit the below link:
https://brainly.com/question/10614569
#SPJ2