which property cohesion or adhesion causes surface tension in water

The products of the Citric Acid cycle are:
- 2 molecules of ATP (adenosine triphosphate)
- 6 molecules of NADH (nicotinamide adenine dinucleotide)
- 2 molecules of FADH₂ (flavin adenine dinucleotide)
- 4 molecules of CO₂ (carbon dioxide)

The Citric Acid cycle, also known as the Krebs cycle or the tricarboxylic acid (TCA) cycle, is a series of chemical reactions that take place in the mitochondrial matrix of eukaryotic cells.

These products are given off in different steps of the Citric Acid cycle. The 2 molecules of ATP are produced in the substrate-level phosphorylation step, the 6 molecules of NADH are produced in the oxidation steps, the 2 molecules of FADH₂ are produced in the succinate dehydrogenase step, and the 4 molecules of CO₂ are produced in the decarboxylation steps.

The products of the Citric Acid cycle are used in other metabolic processes, such as the electron transport chain, to produce more ATP for the cell. The NADH and FADH₂ molecules are used as electron carriers in the electron transport chain, which produces a large amount of ATP. The CO₂ molecules are given off as waste products and are exhaled from the body during respiration.

To know more about Citric Acid cycle here:

https://brainly.com/question/29857075#

#SPJ11

An atom can become a positive or negative ion depending on the number of electrons it possesses.

An atom can become a positive ion when it loses electrons, and a negative ion when it gains electrons. This is because all atoms have an equal number of protons, which carry a positive charge, and electrons, which carry a negative charge.

When the number of electrons compared to protons is changed, the atom can either become positively charged or negatively charged. For example, if an atom with six protons loses one electron, it will have five electrons and six protons, resulting in a net positive charge.

Alternatively, if the atom gains an electron, it will have seven electrons and still six protons, resulting in a net negative charge.

For more questions like Atom click the link below:

https://brainly.com/question/491497

#SPJ4

As a result, the stoichiometric ratio between the reactant, mg ribbon, and the product, hydrogen gas, in the reaction used to calculate the molar volume of gas is 1:1.

One mole of a substance occupies a certain amount of space (designated by the symbol Vm) at a specific temperature and pressure. It is determined by dividing the substance's molecular mass (M) by its density () at the specified temperature and pressure. The SI unit for it is the cubic meter per mole (m3/mol). Cubic meters per mole (m3/mol) is the SI unit for molar volume. The moles per liter of a solution—the measurement of concentration molarity—are referred to as "molars" in this context. The phrase is most frequently used in chemistry to refer to a solute's molar concentration in a solution. Molar concentration is measured in mol/L or M.

Thinking about things from the a molecular perspective is a beneficial quality. All perfect gases will have the same molar volume since they all have the same number density. This will be 22.4 L at STP. This is helpful if you want to visualize the separation of molecules in various samples.

A form's volume is essentially equal to the product of its area and height. Volume = Height x Base Area.

To know more about Molar Volume visit:

https://brainly.com/question/29884686

#SPJ4

False. The densest water is produced at high latitudes where the water is cold and has a high concentration of dissolved salts, causing it to be more dense. This dense water sinks to the ocean floor and spreads to lower latitudes, where it has a significant impact on global ocean circulation.

The densest water is known as North Atlantic Deep Water, which is the densest and coldest water in the ocean. It is formed in the North Atlantic Ocean near the Labrador Sea and Greenland, where the water is cooled by the atmosphere and becomes denser due to the high concentration of dissolved salts.

Dense water then sinks to the ocean floor and spreads to other parts of the world ocean playing a crucial role in the global ocean circulation system.

North Atlantic Deep Water is one of the most important and well-studied water masses in the ocean, as it has a significant impact on the Earth's climate and weather patterns.

Learn more about  densest water here : brainly.com/question/15696598

#SPJ1

The mass of KHP dissolved in 50.00 mL of the standardizing KHP titrant is 0.2505 g. The answer is 0.28 g, rounded to two significant figures . The correct answer is (C).

The balanced chemical equation for the reaction of potassium hydrogen phthalate (KHP) with sodium hydroxide (NaOH) is:

KHP + NaOH → NaKP + H2O

From the given information, we know that 22.20 mL of KHP is neutralized by 25.00 mL of NaOH of concentration 0.049 M. Therefore, we can calculate the amount (in moles) of NaOH used:

moles NaOH = volume × concentration = 25.00 mL × 0.049 mol/L = 0.001225 mol

Since the reaction between KHP and NaOH is 1:1, the amount of KHP used is also 0.001225 mol. We can use the molar mass of KHP to calculate the mass of KHP dissolved in 50.00 mL of the standardizing KHP titrant:

mass KHP = moles KHP × molar mass KHP = 0.001225 mol × 204.23 g/mol = 0.2505 g

Therefore, the mass of KHP after standardization is 0.2505 g. Rounded to two significant figures, the answer is 0.28 g. So, correct option is (C).

To know more about Standardization:

https://brainly.com/question/30695832

#SPJ4

An atom of copper has an atomic mass of 63.546 amu. So, the molar mass of copper metal is equals to the 63.546 g/mol.

Molar mass is defined as the mass of a mole of that substance. For an atom, the molar mass of the element is also known as atomic mass (mass of 1 mole of an atom). For molecules, the molar mass is also known as molecular mass (Mass of 1 mole of the molecule). The units of molar mass is grams per mole. The unit of atomic mass is atomic mass unit, a.m.u. Cu (Copper) is a transition element whose atomic number is 29. The number of protons in copper atom = 29.

The number of neutrons in copper atom = 35. The atomic mass or mass number of copper is 63.546 amu. The molar mass of any element is equal to its

atomic mass and has the units g/mol. So, the molar mass of copper is 63.546 g/mol.

To learn more about atomic mass , visit :

https://brainly.com/question/6166945

#SPJ4

Gas molecules are assumed to be in constant random motion and to collide perfectly elastically with one another in this theory. They bounce off one another. These particles are assumed to be spherical. There are also no interactions between the molecules.

According to kinetic molecular theory, gas particles are in constant motion and have perfectly elastic collisions. Both Charles' and Boyle's laws can be explained using kinetic molecular theory. The average kinetic energy of a gas particle collection is only proportional to absolute temperature.

Collisions are perfectly elastic; when two molecules collide, their kinetic energies and directions change, but the total kinetic energy remains constant. Collisions do not have a "sticky" effect. The absolute temperature is directly proportional to the average kinetic energy of the gas molecules.

Thus,The two molecules will stay together because they are attracted to each other.

To learn more about the kinetic molecular theory, follow the link;

https://brainly.com/question/17121882

#SPJ9

When diluting a strong acid with water, it is recommended to add the acid to the water and not the other way around. The statement is true.

This is because adding water to the acid can cause a rapid and exothermic reaction, leading to splattering and potential injury.

When the acid is added to the water, the heat generated is absorbed by the water, reducing the potential for splattering. Additionally, adding the acid to water allows for better mixing and reduces the risk of creating concentrated acid pockets that can be dangerous.

Overall, it is important to follow safe laboratory practices when working with acids and to consult with a trained professional if you are unsure about the proper procedures.

To know more about the dilution, here

brainly.com/question/28392867

#SPJ4

The final Lewis structure for HBr is:

    :Br:
  ..  ..
H -     :
  ..  ..

The Lewis structure for HBr is as follows:

H - Br

In this structure, the hydrogen atom (H) and the bromine atom (Br) are bonded together by a single covalent bond. This is represented by the dash (-) between the two atoms. The Lewis structure shows the arrangement of the valence electrons around the atoms in a molecule.

To draw the Lewis structure for HBr, we first need to determine the number of valence electrons for each atom. Hydrogen has 1 valence electron and bromine has 7 valence electrons.

Next, we need to arrange the atoms and connect them with a single bond. The hydrogen atom is placed on one side of the bromine atom and a single bond is drawn between them.

Finally, we need to complete the octets for the atoms by adding lone pairs of electrons around the bromine atom. Bromine needs 7 more electrons to complete its octet, so we add 3 lone pairs of electrons around it.

To learn more about Lewis structure refer here:

https://brainly.com/question/20300458#

#SPJ11

The molar mass of KClO3 is 122.55 g/mol.

To find the molar mass of a compound, you need to add up the atomic masses of each element in the compound. You can find the atomic masses on the periodic table.

For KClO3, the formula tells us that there is one atom of potassium (K), one atom of chlorine (Cl), and three atoms of oxygen (O).
The atomic mass of potassium is 39.10 g/mol, the atomic mass of chlorine is 35.45 g/mol, and the atomic mass of oxygen is 16.00 g/mol.
So, the molar mass of KClO3 is:

(1 x 39.10 g/mol) + (1 x 35.45 g/mol) + (3 x 16.00 g/mol) = 122.55 g/mol

Therefore, the molar mass of KClO3 is 122.55 g/mol.

To know more about molar mass here:

https://brainly.com/question/12127540#

#SPJ11

C-H bonds are considered nonpolar because the electronegativity difference between carbon and hydrogen is very small.

Electronegativity is a measure of how strongly an atom attracts electrons in a bond. When the difference in electronegativity between two atoms is large, the bond is considered polar, meaning that one atom has a stronger pull on the shared electrons than the other.

However, when the difference is small, the bond is considered nonpolar, meaning that the shared electrons are equally distributed between the two atoms.

Since the electronegativity difference between carbon and hydrogen is only 0.35, the C-H bond is considered nonpolar. This means that the shared electrons are equally distributed between the carbon and hydrogen atoms, resulting in a balanced distribution of charge.

To know more about C-H bond here:

https://brainly.com/question/15697221#

#SPJ11

Yes, the Chlorine Cl have the high electronegativity. The electronegativity of the chlorine is 3.16.

The chlorine that is the Cl has the very high electronegativity this is because it has the seven electrons in its valence shell or the outermost shell and it only needs one electron to become more stable like the noble gas. The chlorine has the tendency to attract the electrons towards itself.

The Electronegativity is the chemical property that will describes the tendency of an atom or the functional group to attract the electrons toward itself. The value of the electronegativity of the chlorine is 3.16 and this is the high electronegativity value.

To learn more about electronegativity here

https://brainly.com/question/17762711

#SPJ4

The Parkland formula is used to calculate the amount of fluid needed to resuscitate a burn victim. The formula is as follows:
Parkland formula = 4 mL x % of total body surface area burned x body weight (in kg)

To calculate the Parkland formula, follow these steps:

1. Determine the percentage of the total body surface area that has been burned. This can be done using the "rule of nines," which divides the body into sections, each representing 9% of the total body surface area.
2. Multiply the percentage of the total body surface area burned by 4 mL. This will give you the amount of fluid needed per kilogram of body weight.
3. Multiply the amount of fluid needed per kilogram of body weight by the patient's body weight in kilograms. This will give you the total amount of fluid needed for resuscitation.
4. The total amount of fluid should be given over the first 24 hours after the burn, with half of the fluid given in the first 8 hours, and the remaining half given over the next 16 hours.

For example, if a patient has 30% of their total body surface area burned and weighs 70 kg, the Parkland formula would be calculated as follows:

Parkland formula = 4 mL x 30% x 70 kg = 8400 mL
Half of the fluid (4200 mL) would be given in the first 8 hours, and the remaining half (4200 mL) would be given over the next 16 hours.

To know more about Parkland formula here:

https://brainly.com/question/30390609#

#SPJ11

Answer: Condensation

Explanation:

When particles go from a gas to a liquid, it is called condensation.

On a hot summer day, you see this happening when a cold glass of ice tea forms water on the outside of the glass. Humidity in the air comes in contact with the cold glass of tea and water droplets form on the glass.

The percent composition by mass of sulfur in the compound mgso4 would be 27%.

The ability to calculate the amount of each ingredient in a compound makes understanding its % composition crucial.

The ratio of each element's amount to the sum of all the individual elements present in the compound, multiplied by 100, is the definition of an element's percentage composition. Here, the amount is expressed in grams of the constituent parts.

A simple concept is percent composition. The mass percentage of each element in a compound is indicated by its percent composition. The fusion of two or more elements results in a chemical product.

The percent composition by mass of sulfur be:

% S = mass of sulfur / mass of compound x 100%

substitute the values in the above equation, we get

= 32 amu / 120 amu x 100% %S

= 0.266666 x 100% %S = 26.66%

Rounded off to two significant numbers it would be 27%.

Therefore the correct answer is 27%.

To learn more about percent composition refer to:

https://brainly.com/question/28357357

#SPJ4

The H NMR, integration of the peak that gives the area of the peak and the area will gives us the measure of the number of the H atoms .

The H NMR, is the integration of the peak that will gives the area of the peak and the area gives us the measure of the number of the H atoms it will represents the number of the H atoms of that type. The Integration is the mathematical term that defines the area under the curve.

In NMR, the curve represents the spectra, and the integration will measure the area of the peaks in to the spectra. The area of the peak is directly  proportional to the number of the atoms that it will represents.

To learn more about NMR here

https://brainly.com/question/29885193

#SPJ4

The names of the some first generation antipsychotic drugs are the Chlorpromazine, the Droperidol, the Fluphenazine, Haloperidol, the Loxapine.

The Antipsychotics drugs are the type of the psychiatric medication that are available on the prescription to treat the psychosis. They are the licensed to treat the certain types of the mental health problem and whose symptoms are  include psychotic experiences. The some of the  First Generation Antipsychotic Drugs are :

The Antipsychotics drugs also known as the neuroleptics, they are the class of the psychotropic medication that are primarily used to manage the psychosis.

To learn more about drugs here

https://brainly.com/question/28586277

#SPJ4

Some examples of heterogeneous mixtures are oil and water, sand and water, kerosene, and water, oil and vinegar, smog (gas + solid), soda (water + CO2), etc.

A heterogeneous mixture is a kind of mixture in which all the components are entirely mixed and all the particles can be noticed under a microscope. We can readily recognize the components and more than one phase can be glimpsed by the bare eyes. Heterogeneous mixtures are not consistent. If you endure two selections from various parts of the mixture, they will not have an identical composition. You can utilize a mechanical technique to isolate components of a heterogeneous mixture.

To learn more about heterogeneous mixtures visit here:

https://brainly.com/question/30023123

#SPJ4

Magnesium bromide is obtained by: Hydrobromic acid (HBr) is treated with magnesium oxide (MgO) and the product crystallizes. It is also synthesized by the reaction of magnesium carbonate (MgCO₃) and hydrobromic acid (HBr).

Magnesium bromide is a compound composed of bromine and magnesium. The molecular formula or chemical formula of magnesium bromide is MgBr₂. It can be manufactured in the following way.

It is then evaporated and a solid residue is collected. It is soluble in water and partially soluble in alcohol. In nature, it can be found in small amounts in some minerals.

To learn more about magnesium bromide, visit :

https://brainly.com/question/11050230

#SPJ4

The equation for the reaction of iron (iii) phosphate with sodium sulfate to make iron (iii) sulfate and sodium phosphate is 2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO4)₃ + 2 Na₃PO₄.

Each atom on both sides of a balanced chemical equation has the same number and type. A balanced equation's coefficients must have the simplest whole number ratio. In chemical reactions, mass is always conserved.

2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO4)₃ + 2 Na₃PO₄ this is a balanced chemical equation for iron (iii) phosphate with sodium sulfate to make iron (iii) sulfate and sodium phosphate.

Thus, the reaction is 2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO4)₃ + 2 Na₃PO₄.

To learn more about the balanced chemical equation, follow the link;

https://brainly.com/question/28294176

#SPJ9

The aqueous solutions has the highest boiling point is 0.1M BaCl₂ because it dissociates into three ions in solution, which is the highest number of ions. Option C is correct.

The boiling point of a solution is directly related to the concentration of solute particles in the solution. A solution having a higher concentration of solute particles will have a higher boiling point.

Out of the given options, BaCl₂ dissociates into three ions (Ba²⁺, 2Cl⁻) in solution, K₂SO₄ dissociates into three ions (2K⁺, SO₄²⁻) in solution, Na₃PO₄ dissociates into four ions (3Na⁺, PO₄³⁻) in solution, and KNO3 dissociates into two ions (K⁺ NO₃⁻) in solution.

Therefore, the aqueous solution with the highest boiling point will be the one that dissociates into the most number of ions i.e 0.1M BaCl₂.

To know more about boiling point here

https://brainly.com/question/2153588

#SPJ4

Zero-order kinetics is defined as the kinetics that undergoes constant elimination regardless of the plasma concentration, following a linear elimination phase as the system that becomes saturated.

Zero-order reaction is generally defined as a chemical reaction wherein the rate does not vary with the increase or decrease in the concentration of the reactants.

A few substances are often eliminated by means of zero-order elimination kinetics, because their elimination process is saturated. Examples of zero order kinetics are Ethanol, Phenytoin, Salicylates, Cisplatin, Fluoxetin, Omeprazol.

The integrated rate law for the zero-order kinetics is given as A →  [A]t = -kt + [A](0). This is because this equation has the form y = mx + b, a plot of the concentration of A as a function of time yields a straight line.

Learn more about zero order kinetics from the link given below.

https://brainly.com/question/3454900

#SPJ4

Magnesium hydroxide can be separated from a mixture of magnesium hydroxide and zinc hydroxide by adding more hydroxide (NaOH) then filter off the liquid containing the zinc, all you will have left is solid magnesium hydroxide.

This is referred to as a process of separating a solid from a fluid through a porous material that holds the solid and fluid passes through.

Adding more hydroxide (NaOH) then filter off the liquid containing the zinc, all you will have left is solid magnesium hydroxide.The zinc will form the (Zn(OH)) and go into solution leaving the magnesium hydroxide untouched. If you filter off (or simply decant) the liquid containing the zinc, all you will have left is solid magnesium hydroxide.

Read more about Filtration here https://brainly.com/question/23945157

#SPJ1

BeCl₂ is a nonpolar molecule.



A molecule can be polar or nonpolar depending on the arrangement of atoms and the electronegativity difference between them. If the electronegativity difference between two atoms is greater than 0.4, the bond between them is considered polar.

In the case of BeCl₂, the molecule has a linear shape with the two chlorine atoms bonded to the central beryllium atom.

The electronegativity difference between beryllium and chlorine is 1.5, which indicates that the bonds are polar. However, because the molecule is linear, the dipole moments of the two polar bonds cancel out, resulting in a nonpolar molecule.

BeCl₂ is a nonpolar molecule because the dipole moments of the polar bonds cancel out due to the molecule's linear shape.

To know more about polarity here:

https://brainly.com/question/3184550#

#SPJ11

All of them have the same kinetic energy, with 298 K having the highest average kinetic energy per mole.

Kinetic energy is the energy of motion. Any object that is moving possesses kinetic energy, and the amount of energy it has is proportional to its mass and velocity. The formula for calculating kinetic energy is KE=1/2mv^2, where m is the mass of the object and v is its velocity. The kinetic energy of an object can be transformed into other forms of energy, such as potential energy, heat, or work. In physics, kinetic energy is an important concept that is used to describe the behavior of moving objects and their interactions with other objects or systems. Examples of kinetic energy in everyday life include a moving car, a swinging pendulum, a bouncing ball, or a running athlete. Understanding kinetic energy is essential for many fields of science, such as mechanics, thermodynamics, and electromagnetism.

Learn more about Kinetic energy here:

https://brainly.com/question/12450160

#SPJ4

Calcium ion created by the calcium atom losing two electrons has 18 electrons.

A neutral calcium atom has 20 electrons. When it loses two electrons, it becomes a calcium ion with a +2 charge. Since electrons have a negative charge, a calcium ion with a +2 charge will have 2 fewer electrons than a neutral calcium atom.

The calcium ion is a positively charged ion that has lost two electrons from the neutral calcium atom. It has a 2+ charge and is represented as Ca2+. The electronic configuration of the calcium ion is 1s² 2s² 2p⁶ 3s² 3p⁶, which means it has a total of 18 electrons. Thus, a calcium ion with a +2 charge will have 18 electrons.

To know more about the calcium ion, here

brainly.com/question/12985536

#SPJ4

Hydrogen gas bubbles are produced when hydrochloric acid is used to treat lead.  [tex]$\mathrm{Pb}+2 \mathrm{HCl} \rightarrow \mathrm{PbCl}_2+\mathrm{H}_2[/tex]

(a) Because silver is low on the metal reactivity scale, it does not react with diluted HCl.

(b) Because the reaction is exothermic, the temperature of the reaction mixture increases when aluminum is added.

(c) Because sodium is very reactive and produces an exothermic reaction that raises temperature, it is discovered that the reaction of sodium metal is highly explosive.

(d) Hydrogen gas bubbles are produced when hydrochloric acid is used to treat lead.

[tex]$\mathrm{Pb}+2 \mathrm{HCl} \rightarrow \mathrm{PbCl}_2+\mathrm{H}_2[/tex]

The complete question is:

During the reaction of some metals with dilute hydrochloric acid, following observations were made.

(a) Silver metal does not show any change

(b) The temperature of the reaction mixture rises when aluminium (Al) is added.

(c) The reaction of sodium metal is found to be highly explosive

(d) Some bubbles of gas are seen when lead (Pb) is reacted with the acid.

Explain these observations giving suitable reasons.

To learn more about hydrochloric acid, refer to:

https://brainly.com/question/30640682

#SPJ1

In a polar covalent bond, electrons are shared unequally. The correct alternative is option b.



A polar covalent bond is a type of bond in which electrons are shared unequally between two atoms. This unequal sharing of electrons results in a partial negative charge on one side of the bond and a partial positive charge on the other side.

This charge separation creates a dipole, which is a molecule with two poles.

The unequal sharing of electrons is due to the difference in electronegativity between the two atoms. The atom with the higher electronegativity will have a greater attraction for the electrons and will therefore have a partial negative charge, while the atom with the lower electronegativity will have a partial positive charge.

To know more about polar covalent bond here:

https://brainly.com/question/28955235#

#SPJ11

Energy stored in chemical bonds is known as "Potential Energy." The other type of energy is Kinetic Energy.

Potential energy is energy stored in chemical bonds. Potential energy is the energy associated with an object due to its position or structure. For example, the energy in a molecule's chemical bonds is related to the structure of the molecule and the positions of its atoms relative to one another. Potential energy can be seen in everyday situations such as the energy held behind a dam or a person about to skydive out of an airplane.

On the other hand, kinetic energy is the energy associated with an object’s motion. Kinetic energy can be found in anything that moves around us. Walking, soaring, falling, flying, and throwing are all examples of kinetic energy.

Here to learn more about Potential Energy:

https://brainly.com/question/14427111

#SPJ4

The three pKa values of aspartic acid exists 1.89, 3.65 and 9.60.

Due to the presence of two carboxyl groups in the molecule, aspartic acid has an isoelectric point of 2.77. Carboxyl groups attached to alpha carbon have a pKa value of 1.88, -COOH groups attached to side chains have a pKa value of 3.65, and amino groups have a pKa value of 9.60. The sum of pKa1 and pKa3 is divided in half to determine the isoelectric point.

Depending on their side chains, the proteinogenic amino acids are amphoteric and have two or three pK values. The -carboxyl group is represented by pKa1, the -ammonium ion is represented by pKa2, the side chain group, if any, is represented by pKa3, and the isoelectric point, at which the amino acid has no net charge, is represented by pI.

To learn more about amino acid aspartic acid refer to:

https://brainly.com/question/30612285

#SPJ4