Which process describes the warm ocean that transfers heat to the air above it?
O conduction
O convection
O reflection
O radiation

Try this solution, all the details are in the attachment. note, the answer is marked with orange colour. If it is possible, check the provided solution in other sources.

Answer: ≈0.81c.

When you rub a dry cloth across glass, it creates charged static electricity, which attracts little non-charged dust particles.

Explanation:

conduction- putting a metal spoon in fire

convection- boiling water. In ventilation

Radiation- suns heat reaches us by radiation. heat from fire place reaches us by radiation.

Answer:

The resistance of a 60 watt light bulb designed to operate at 120 volts is 240 Ω.

Explanation:

Answer:

If the lifting force varies jointly with wing surface area and the square of the plane's velocity, then:

F = kAv²

If the lift is 27,800 pounds when the area is 190 sq. ft and the velocity is 230 mph, then the constant of proportionality is:

27,800 = k(190)(230)²

k = (27,800) / (190)(230)² = 139/50255

The lifting force the plane slows down to 200 mph is:

F = (139/50255)(190)(200)²

F = 21,020.79

Rounded to the nearest pound, the lifting force is 21,021 pounds.

(a) The initial energy of the mass is 76.485 J.

(b) The compression of the spring in the absence of friction is 21.2 cm.

(c)  The compression of the spring in the presence of friction is 19.4 cm.

The initial energy of the mass is determined as follows;

E = K.E + P.E

E = ¹/₂mv² + mgh

where;

E = ¹/₂mv²  + mg x Lsinθ

P.E = ¹/₂(9.4)(2.5)² +  (9.4)(9.8)(0.87)(sin36)

P.E = 76.485 J

The compression of the spring in the absence of friction is calculated as follows;

Ux = E

¹/₂kx² = 76.485

kx² = 2(76.485)

x² = (2 x 76.485)/k

x = √(2 x 76.485)/k

x = √(2 x 76.485 / 3413.7)

x = 0.212 m

x = 21.2 cm

The compression of the spring in the presence of friction is determined by applying the principle of conservation of energy.

E - Fd = Ux

E - μmgd = ¹/₂kx²

76.11 - (0.27 x 9.4 x 9.8 x 0.48) = ¹/₂(3413)x²

64.17 = 1706.5x²

x² = 0.0376

x = √0.0376

x = 0.194

x = 19.4 cm

Learn more about conservation of energy here: https://brainly.com/question/166559

The power delivered by the motor lift in elevating the 10 passengers at the speed of 16.8 m/s is 205800 Watts

Power is simply defined as the rate at which energy is consumed. It can be expressed mathematically as

Power (P) = Force (F) × velocity (v)

P = Fv

F = ma

F = 1250 × 9.8

F = 12250 N

P = Fv

P = 12250 × 16.8

P = 205800 Watts

Learn more about power:

https://brainly.com/question/5684937

Answer:

D. remain at rest

Explanation:

Answer:

d. energy in an isolated system remains constant.

Explanation:

energy can neither be replaced or destroyed

Answer:

thats is so hard

Explanation:

i cant answer that

Answer:

C

Explanation:

Reflection.

Badminton shoes are specifically designed for badminton footwork and movement. Rubber that is anti-slip and wear-resistant is ideal for the soles of badminton shoes, while the midfoot area requires excellent shock-absorption and resilience

Answer:

It's the perfect shoe to wear on the fields they play on like so they don't slip

Answer:

The static frictional force is the force between the magnetic forces statically and contains only two objects during this physical reaction. It results in electricity and a slight shock.

Answer:

Draw a table showing the different forms of the first law for the four processes described.

The gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is 167.58 Pa.

The gauge pressure in the balloon is the pressure inside the balloon due to the water columns relative to the atmospheric pressure.

The gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is calculated as follows;

P = ρgΔh

P = (1,000)(9.8)(0.0171)

P = 167.58 Pa

Thus, the gauge pressure in the balloon as indicated by a difference of 0.0171 m in the heights of the water columns is 167.58 Pa.

Learn more about gauge pressures here: https://brainly.com/question/6984092

Answer:

It is B

Explanation:

Option B talks about how the frequency of the wave increases the shorter it's wavelengths

Answer:

It's b

Explanation:

1st image - B) Object position

2nd image - A) Focal length

3rd image - C) Image position

Answer:

0.98 [sec].

Explanation:

1) the time when the player is moving up equals the time the player falls, it can be 't'. Then

2) the equation of moving down can be written as

[tex]\frac{g*t^2}{2} =h, \ where[/tex]

g=10 [m/s²], t - time, h - the given height.

3) according to the formula above the time spent to moving down is:

[tex]t=\sqrt{\frac{2h}{g}};[/tex]

[tex]t=\sqrt{\frac{2.4}{10}}=\sqrt{0.24} =0.49[s].[/tex]

4) finally, the total time is t*2=0.98[sec].

[tex]\text{Given that,}\\\\\text{Mass, m =10 kg}\\\\\text{Time, t = 8 sec}\\\\\text{Velocity, v = 4~m/s}\\\\\text{When a body is moving upwards,}\\\\\text{Tension,}~ T=mg +ma\\\\~~~~~~~~~~~~~~~=mg+m\left(\dfrac{v-u}t \right)\\\\~~~~~~~~~~~~~~~=10(10)+10\left(\dfrac{4-0}8\right)\\\\~~~~~~~~~~~~~~~=100+10\left(\dfrac 12\right)\\\\~~~~~~~~~~~~~~~=100+5\\\\~~~~~~~~~~~~~~~=105~N[/tex]

It is amount of force or motion that cause the movement or moving of body.

Thus it is well explained.

To learn more about the collisions refer to link ;

https://brainly.com/question/7694106

1.No they do not violate the conservation of law. Because the initial momentum can be zero.

2. The momentum is conserved in both elastic and inelastic collision.

The momentum of the body before the contact is always equal to the momentum of the body after the impact, according to the rule of conservation of momentum.

According to the law of conservation of momentum;

Momentum before collision =Momentum after collision

[tex]\rm m_1u_1 + m_2u_2 = v(m_1 + m_2)[/tex]

1.No they do not violate the conservation of law. Because the initial momentum can be zero.

2. The momentum is conserved in both elastic and inelastic collision. Hence the conservation law works with elastic and inelastic collisions.

3. An elastic collision is one in which kinetic energy is conserved, meaning that the total kinetic energy before and after the impact is the same.

The object bounces once after the body gets struck. When the body's final velocity is zero it follows the stationary object after the collision.

4.. Airbags are meant to inflate automatically in the case of an abrupt deceleration or impact force indicative of a collision.

When the bag is fully inflated, it protects the driver and/or passenger by Increasing cushioning around the driver's neck, head, and spine.

5. Stretchable seatbelts are meant to allow a passenger's considerable velocity to be slowly reduced, preventing the passenger from being flung forward abruptly.

As a result, if the automobile collides, serious casualties can be avoided.

Hence no they do not violate the conservation of law. Because the initial momentum can be zero.

To learn more about the law of conservation of momentum refer;

https://brainly.com/question/1113396

Answer:

I think D sorry if I'm wrong

Electric potential difference is the difference in electric potential between two positions and it is measured in volts.

This is the potential energy of an electric charge has due to its location in a field.

The electric potential of a charged particle is the electric potential energy of the charged particle divided by its charge magnitude.

Electric potential difference is the difference in electric potential between two positions.

Volt is the SI unit of electric potential difference.

Learn more about electric potential here: https://brainly.com/question/14306881

Answer:

7 minutes

Explanation:

Explanation:

Power = work / time

Power = force × distance / time

500 W = 210 N × 1000 m / t

t = 420 s

t = 7 min

Biomolecules are fundamental for life. They required both energy supply and building structures.

Biomolecules are organic molecules that fundamental for life and must be ingested from the regular diet.

Biomolecules include proteins (e.g., meal proteins), lipids (fats) and also carbohydrates (e.g., glucose).

Biomolecules required both energy supply (e.g., glucose) and building structures (e.g., amino acids in proteins).

Learn more about biomolecules here:

https://brainly.com/question/10904629

Answer:

1716.75 J

Explanation:

Step 1: First check what we are provided with. As per given question we have:

mass (m) = 70 kg, height (h) = 2.5 m and acceleration due to gravity (g) = 9.81 m/s².

Step 2: Check what we are asked to find out.

Work done = Change in Potential energy

The stuff required to solve this question is potential energy. Using the formula: P = mgh. Where P is Potential energy, m is mass, g is acceleration due to gravity and h is height.

Step 3: Substitute the known values in the above formula.

→ P = 70 × 2.5 × 9.81

→ P = 1716.75 J

Hence, the work done against the force of gravity is 1716.75 J.

The magnitude of the kinetic friction force between the crate and the floor is 33.15 N.

The magnitude of kinetic frictional force is determined by applying Newton's second law of motion as shown below;

F - Ff = ma

where;

Subsitute the given parameters and solve for kinectic frictional force

197 - Ff = 49.1(3.337)

197 - Ff = 163.85

Ff = 33.15 N

Thus, the magnitude of the kinetic friction force between the crate and the floor is 33.15 N.

Learn more about kinetic frictional force here: https://brainly.com/question/20241845

Hello!

We know that at the BOTTOM of the pendulum's trajectory, the bob has a maximum speed. This means that its KINETIC ENERGY is at a maximum, while its Gravitational POTENTIAL ENERGY is at a minimum.

On the other hand, when the bob is at its highest points, the bob has a velocity of 0 m/s, so its KE is at a minimum and its PE is at a maximum.

We can use the work-energy theorem to solve. Let the Initial Energy equal the bob's energy at one of the sides, while the final Energy equals the bob's energy at the bottom.

[tex]E_i = E_f\\\\PE = KE[/tex]

Recall that:
PE = mgh

m = mass (kg)

g = acceleration due to gravity (m/s²)

h = height (m)

KE = 1/2mv²

m = mass (kg)

v = velocity (m/s)

Set the two equal and solve for 'h'.

[tex]mgh = \frac{1}{2}mv^2[/tex]

Cancel mass.

[tex]gh = \frac{1}{2}v^2[/tex]

Solve for 'h'.

[tex]h = \frac{v^2}{2g}\\\\h = \frac{3^2}{2(9.8)} = \boxed{0.459 m}[/tex]

Answer:

m = 4.5 kg

Explanation:

w = - 1800 j

Fd = - 1800 j

mgd = - 1800 j

m = - 1800 ÷(gd)

m = - 1800 ÷( 10×-40)

m = 4.5 kg

Hi there!

We can begin by summing the forces acting on the car.

Along the axis of the incline, the forces of friction and gravity are working. The force of friction points towards the top of the ramp, while the force of gravity works towards the bottom.

We can use trigonometry to determine the force due to gravity along the ramp.

[tex]F_g = Mg sin\theta[/tex]

The force due to friction is equal to:
[tex]F_f = \mu N[/tex]

The normal force is the vertical component of the force due to gravity, so:
[tex]F_f = \mu Mgcos\theta[/tex]

Now, the combination of these two forces produces a component of the centripetal force. Drawing a diagram, we see that the true centripetal force is the HYPOTENUSE, while these forces sum up to its horizontal component along the ramp.

Therefore:
[tex]F_c sin\theta = Mgsin\theta - \mu Mgcos\theta[/tex]

The centripetal force is equivalent to:
[tex]F_c = \frac{Mv^2}{r}[/tex]

m = mass (kg)

v = velocity (m/s)
r = radius (m)

Rewrite:
[tex]\frac{Mv^2}{r}sin\theta = Mgsin\theta - \mu Mgcos\theta[/tex]

Cancel out 'M'.

[tex]\frac{v^2}{r}sin\theta = gsin\theta - \mu gcos\theta[/tex]

Rearrange to solve for 'r'.

[tex]r = \frac{v^2sin\theta}{gsin\theta - \mu gcos\theta}[/tex]

Plug in values and solve.
[tex]r = \frac{(27.1^2)sin(29.1)}{(9.8)sin(29.1) - 0.4(9.8)cos(29.1)} = \boxed{266.365 m}[/tex]