Which power of a telescope might be expressed as "0.5 seconds of arc"?

Answers

Answer 1

The power of a telescope is typically expressed in terms of its resolving power or angular resolution, which is the smallest angle between two points that the telescope can distinguish.

The term "0.5 seconds of arc" refers to the angular resolution of a telescope and represents the smallest angle that the telescope can distinguish between two points in the sky.  This angular resolution is typically dependent on the size of the telescope's aperture or lens diameter, and the wavelength of the light being observed. A smaller angular resolution means that the telescope can distinguish finer details in the observed object. Thus, a telescope with an angular resolution of 0.5 seconds of arc would be able to distinguish between two points in the sky that are separated by a distance of 0.5 seconds of arc, which is a very small angle. This is an important factor for astronomers who want to study objects with high levels of detail.

For more information on astronomers see:

https://brainly.com/question/16471213

#SPJ4


Related Questions

what the island of puerto rico is part of the north american country of?

Answers

The Island Of Puerto Rico is part of the citizens of North American country.

What is the connection between the Island Of Puerto Rico and the North American country?

Puerto Rico is a territory of the United States, which is located in North America. However, it is not a part of any North American country as it is an unincorporated territory of the United States. This means that while the people of Puerto Rico are citizens of the United States, they do not have the same rights and privileges as citizens of the states.

Therefore, the correct answer is as given above. It could then be concluded that the island of Puerto Rico is part of the North American country of an unincorporated territory of the United States.

learn more about Puerto Rico: https://brainly.com/question/24373841

#SPJ1

What energy produces the most emissions?

Answers

Burning fossil fuels like coal, natural gas, and petroleum produces the most emissions.

Fossil fuels including coal, natural gas, and petroleum are principally responsible for the majority of human-caused greenhouse gas (GHG) emissions that are utilised for energy. The primary drivers of energy consumption are economic expansion and weather patterns that influence the need for heating and cooling.

The types of energy used can also be impacted by government policy and energy pricing. Nearly all of the rise in greenhouse gases in the atmosphere is a result of human activity. Burning fossil fuels for transportation, heat, and electricity is the main cause of human-related greenhouse gas emissions.

Know more about fossil fuels here

https://brainly.com/question/3371055

#SPJ4

Question 3 of 20
Two vast areas of air have different temperatures and pressures, but within
the regions, the temperatures and pressures are similar. The line where these
regions are colliding is called a(n):
O A. easterly wave.
OB. continental disturbance.
OC. weather front.
OD. atmospheric discontinuity.

Answers

Two vast areas of the air have different temperatures and pressures, but within the regions, the temperatures and pressures are similar. The line where these regions are colliding is called a(n): continental disturbance. Thus the correct option is B.

Why temperature rises in today's time?

The ozone layer is being destroyed by an increase in greenhouse gases, which results in the direct transmission of ultraviolet rays into the globe and an increase in temperature.

Less dense air masses quickly rise whereas the denser air masses fall quickly. The Coriolis impact causes the front to change into a channel that has the potential to produce tornadoes and tropical storms due to continental disturbance.

Therefore, the option B is appropriate.

Learn more about the Increase in temperature, here:

brainly.com/question/18502561

#SPJ1

How to read METAR weather reports

Answers

A METAR (Meteorological Terminal Aviation Routine Weather Report) is a standard format for reporting weather information that is used by airports and meteorological organizations.

How to read a METAR weather report:

METAR reports provide detailed information about current weather conditions, including temperature, wind speed and direction, precipitation, cloud cover, and visibility.

Report identifier: The report starts with a four-letter station identifier that indicates the location where the weather observation was taken.

Observation time: The report includes the date and time when the observation was taken. The time is given in UTC (Coordinated Universal Time).

Wind information: The wind information includes the wind speed and direction in knots, as well as the gust speed (if any). The wind direction is given as a three-digit number that represents the direction the wind is coming from (for example, 220° means the wind is coming from the southwest).

Visibility: The visibility is given in statute miles or meters, depending on the country.

Runway visual range (RVR): The RVR provides information about the visibility along the runway, which is useful for pilots when landing or taking off.

Weather conditions: The report includes information about current weather conditions, such as precipitation (e.g., rain, snow, drizzle), cloud cover, and cloud heights.

Temperature and dew point: The temperature and dew point are given in degrees Celsius or Fahrenheit, depending on the country. The dew point is an important indicator of the level of atmospheric moisture.

Barometric pressure: The barometric pressure is given in inches of mercury or hectopascals, depending on the country.

Learn more about weather reports at:

https://brainly.com/question/11950913

#SPJ1

Sort the following characteristics by the type of volcano they are associated with.
1) pillow basalt
2) lahars
3) strombolian eruption
4) pyroclastic flow
5) flank eruptions
6) fire fountain
7) felsic lave
cinder cone volcano :
shield volcano :
stratovolcano :

Answers

These traits are especially related to 3 sorts of volcanoes including cinder cone volcano, defend volcano and stratovolcano. Volcanic eruptions can purpose severe destruction of lifestyles and property, specially in regions of the sector which might be closely populated.

Sorting of traits- Cinder cone volcano - flank eruptions; strombolian eruption Shield volcano - pillow basalt; hearthplace fountain Stratovolcano - pyroclastic flow; lahars; felsic lava. A volcano is a crack in a planet's crust, including the only on Earth, that allows warm lava, volcanism, and gases to emerge from a molten cloth beneath the surface. Most volcanoes on Earth are placed undersea, and they may be maximum predominantly encountered wherein continental plates are diverging or convergent. An notable demonstration of Earth's would possibly is a volcanic eruption. Volcanic eruptions can purpose severe destruction of lifestyles and property, specially in regions of the sector which might be closely populated, despite the fact that that they're surprising to witness.

To learn more about volcano check the link below:

https://brainly.com/question/25121802

#SPJ4

Which of the following describes the position of critics of bioengineering and GMOs?


GM crops are not necessary because organic pesticides were manufactured to control a wide variety of insects to protect agricultural crops and do not harm people or the environment when used properly.


GM seeds reduce the need to use pesticides and thus are safe for humans and the environment, but the increased use of herbicides affects the groundwater.


The chemicals in GM seeds compromise soil quality and are associated with increased disease susceptibility in crops, ultimately leading to increased use of pesticides.


GMOs are not necessary because washing food prior to eating it removes all traces of chemicals.


Productivity of eggplant crops in Bangladesh decreased dramatically when farmers used GM seeds and did not spray the crop with chemical pesticides before harvest.

Answers

Chemicals in GM seeds degrade soil quality and are linked to increased disease susceptibility in crops, leading to greater pesticide use. It is the correct answer.

What does GMO stand for?

GMO is an abbreviation for genetically modified organisms. Any complete food whose genetic material has been changed using genetic engineering techniques is considered a genetically modified food (GMO). Typically, a gene from another food or live thing is transplanted into the DNA of the meal to improve its qualities.

Many GMO crops are used to produce substances used by Americans, such as cornstarch, corn syrup, corn oil, soybean oil, canola oil, and granulated sugar. GMO potatoes, summer squash, apples, papayas, and pink pineapples are among the fresh fruits and vegetables available.

To learn more about GMOs, click

https://brainly.com/question/30526813

#SPJ1

how to classify joints by?

Answers

Joints can be classified in two main ways by their structure and by their function.



1. Structural Classification of Joints:

This classification is based on the type of connective tissue that binds the bones together and the presence or absence of a joint cavity. There are three types of joints based on structural classification:

a. Fibrous Joints: These joints are held together by fibrous connective tissue and do not have a joint cavity. Examples include sutures in the skull and syndesmoses between the bones of the forearm and leg.

b. Cartilaginous Joints: These joints are held together by cartilage and do not have a joint cavity. Examples include the pubic symphysis and intervertebral discs.

c. Synovial Joints: These joints have a joint cavity filled with synovial fluid and are held together by a joint capsule and ligaments. Examples include the knee, elbow, and shoulder.



2. Functional Classification of Joints:


This classification is based on the degree of movement allowed by the joint. There are three types of joints based on functional classification:

a. Synarthroses: These joints are immovable. Examples include sutures in the skull and gomphoses in the teeth.

b. Amphiarthroses: These joints are slightly movable. Examples include the pubic symphysis and intervertebral discs.

c. Diarthroses: These joints are freely movable. Examples include the knee, elbow, and shoulder.



In conclusion, joints can be classified by their structure (fibrous, cartilaginous, or synovial) and by their function (synarthroses, amphiarthroses, or diarthroses).

To know more about connective tissue  click on below link:

https://brainly.com/question/17664886#

#SPJ11

What is the Far Realm 5e?

Answers

The Far Realm 5e is a plane of existence in the Dungeons and Dragons (D&D) game.

It is a place of madness and chaos, where the laws of reality do not apply. It is inhabited by creatures known as aberrations, which are twisted and bizarre beings that are unlike anything found in the other planes of existence.

The Far Realm is also the source of many of the magical powers used by spellcasters in the game. It is a mysterious and dangerous place, and those who venture there are often driven mad by the experience.

To learn more about Dungeons and Dragons refer here

https://brainly.com/question/6348123#
#SPJ11

s Surface
2
There are many natural processes that shape the Earth's surface. These processes can act as constructive forces, destructive
forces, or both.
In general, natural processes act as destructive forces
OA. only at high elevations.
OB.
only at sea level.
OC. when they build up landforms.
OD. when they wear down landforms.
Reset
Submit

Answers

There are many natural processes that shape the Earth's surface.  In general, natural processes act as destructive forces when they wear down landforms. Thus option (d) is correct.

What is an earth?

The earth is the only planet known till date that support life. The Earth or our home is the third planet from the sun. The earth has a diameter of roughly 8,000 miles  and is mostly round because gravity generally pulls matter into a ball.

Earth is the planet we live on, the third of eight planets in our solar system and the only known place in the universe to support life.

There are many natural processes that shape the Earth's surface.  In general, natural processes act as destructive forces when they wear down landforms. Therefore, option (d) is correct.

Learn more about earth here:

brainly.com/question/109430

#SPJ9

An igneous rock has a medium-gray, fine-grained groundmass with large crystals of plagioclase. Which of the following statements about it is FALSE?
A. It could logically be porphyritic andesite.
B. The lava flow that produced it got quenched in ocean water.
C. The plagioclase crystals are called phenocrysts.
D. It began to crystallize at depth from intermediate-composition magma, then rose to the surface and became a lava flow.

Answers

The statement that is false, B. The lava flow that produced it got quenched in ocean water.

Igneous rocks  shape while warm, molten rock crystallizes and solidifies. The soften originates deep inside the Earth close to energetic plate limitations or warm spots, then rises towards the surface. Igneous rocks are described as varieties of rocks which can be shaped while molten rock (rock liquefied via way of means of severe warmness and pressure) cools to a stable state. Lava is molten rock flowing out of fissures or vents at volcanic centres (while cooled, they shape rocks consisting of basalt, rhyolite, or obsidian). Igneous rocks (from the Latin phrase for fire) shape while warm, molten rock crystallizes and solidifies. The soften originates deep inside the Earth close to energetic plate limitations or warm spots, then rises towards the surface.

Thus, option B is incorrect.

To learn more about igneous rocs check the link below:

https://brainly.com/question/1373134

#SPJ4

pls pls help whoever gets it right gets a crown

Answers

Answer: Lose 1

Explanation: Potassium (K) is in group one therefore having an extra electron. Potassium loses one to become stable and most likely donates it to a halogen (group 7 element) to make that have full outer shells as well.

Which characteristic best supports its formation from sedimentary processes?

Answers

The presence of strata or stratification is the feature that best supports the creation of a rock by sedimentary processes.

Sand, silt, clay, and organic material are only a few of the sedimentary rock constituents that can build up and cement together to produce sedimentary rocks. These settling particles from the air or water form separate layers or strata when they are compressed and cemented together over time. Layering is a crucial component of sedimentary rocks and is frequently apparent with the unaided eye. According to the shifting environmental factors that influenced the sediments' deposition, the layers may differ in hue, texture, or content. For instance, the presence of alternating layers of sandstone and shale may be a sign of changes in water flow or the deposit of sediment in various habitats, such as a river delta or a shallow marine basin.

Sedimentary rocks can have layers in addition to having apparent fossils or other traces of ancient life. This is due to the possibility of organic material becoming trapped inside sediment and being preserved over time, providing a record of ancient ecosystems and conditions.

To know more about sedimentary rocks

brainly.com/question/14040419

#SPJ4

Which theme of geography studies how and why places are similar to other places?
A
place

B
region

C
human-environment interaction

D
location

Answers

Answer: B: Region studoes how and why places are similar to other places

Walking along a large city park on a hot summer day, you look for a cool resting place and sit down on a large rock under a willow tree, at the quiet edge of a stream. You have searched for and found an example of a
a. population.
b. landscape.
c. microclimate.
d. biome.

Answers

Walking along a large city park on a hot summer day, you look for a cool resting place and sit down on a large rock under a willow tree, at the quiet edge of a stream. You have searched for and found an example of a microclimate. The correct answer is C.

A microclimate is defined as the climate of a relatively small or limited area, particularly when this differs initially from the surrounding climate. Even if the area is very hot, there will be a cool microclimate here near the side of the stream, beneath the tree, or on the rock.

What would be an excellent example of a microclimate?

Microclimates are a result of locally specific factors like hills, mountains, and water features. Buildings and roads are examples of man-made structures that can affect microclimates. Examples are the pleasant weather at the ocean and snow at higher elevations on city hills.

To know more about microclimate visit:

brainly.com/question/12852319

#SPJ4

only cycle which does not pass through the atmosphere is called ?

Answers

In contrast to the sulfur and nitrogen cycles, the phosphorus cycle does not have an atmospheric phase.

The required details for phosphorus cycle in given paragraph

The biogeochemical cycle known as the phosphorus cycle explains how phosphorus moves through the lithosphere, hydrosphere, and biosphere. Because phosphorus and phosphorus-based compounds are typically solids at the typical ranges of temperature and pressure found on Earth, the atmosphere does not significantly affect the movement of phosphorus, unlike many other biogeochemical cycles. Only certain, regional circumstances are necessary for the formation of phosphine gas. Therefore, it is important to consider the phosphorus cycle as a whole before concentrating on the cycle in terrestrial and aquatic systems.

Phosphorus is necessary for the operation of living things and is found in DNA, RNA, ATP, and other important molecules.

To know about phosphorus cycle click here

https://brainly.com/question/29789477

#SPJ4

what norwegian city located on an island off mainland norway?

Answers

The city of Tromsø is located on a 21.7 square kilometer island with a population of 39,882. The island is connected to the Tromsdalen region on the mainland to the east by the Tromsø Bridge and the Tromsøysund Tunnel.

The required details for Tromsø in given paragraph

Tromsø is a municipality in Troms and Finnmark, Norway.The administrative center of the municipality is the city of Tromsø. Northern Norway is where Troms is. The municipality, one of 356 in Norway, is rated 21st with a total size of 2,521 square kilometers. The twelfth largest municipality in Norway is Troms, which has 77,544 residents. The commune has 31 people per square mile of land. There are 4 people per square kilometer (81/sq mi), and in the last ten years, the population has grown by 12.2%. North of the Arctic Circle, it is the third-biggest urban area in the world and the largest in Northern Norway (after Murmansk and Norilsk).

The city of Troms is located primarily on the island of Tromsya, although there are also portions of the surrounding mainland and the island of Kvalya included in the metropolitan area. Troms is located 217 miles (350 km) north of the Arctic Circle.

To know about Tromsø click here

https://brainly.com/question/30455674

#SPJ4

What effect does Central America's location on top of moving tectonic plates have on the region ?

Answers

Central America experiences frequent earthquakes and volcanic eruptions because it lies where several tectonic plates meet and exert pressure on one another.

Overall, this type of seismic wave is the most destructive. A) P wave. B) S wave. C) surface wave. D) tsunami.

Answers

Overall, the type of seismic wave that is the most destructive is C) surface wave.

Write a short note on seismic waves.

Seismic waves are the energy waves that are generated by earthquakes, volcanic eruptions, and other geological events that cause the ground to shake. There are two main types of seismic waves: body waves and surface waves. Body waves, such as P-waves and S-waves, travel through the interior of the Earth, while surface waves, such as Love waves and Rayleigh waves, travel along the Earth's surface. Seismic waves help scientists to study the structure of the Earth's interior and to locate the source of earthquakes.

Hence, the answer is C) surface wave.

To learn more about seismic waves, follow the link:

https://brainly.com/question/13062627

#SPJ4

Review the map of Asia.
Asia
5
Black Sea Caspian Sea
Turkey
Syria 3 Afghanistan
Iraq
Iran
Saudi
Arabia
Red
Sea 2
Persian
Gulf
N
WE
SI
Mark this and return
Arabian
Sea
Himalayas
Nepal
India 4
Mongolia
Bay
Bengal
China
Thailand
South
China
Sea
Which number on the map shows the approximate place
of origin of the Aryan people?
O 1
O2
O 3
O4

Answers

Answer:

The approximate place of origin of the Aryan people is shown by the number 4 on the map, which is India. Therefore, the answer is D.

a subsistence farmer in the amazon river basin in brazil practices slash-and-burn farming. where is he most likely to locate his crops?
a. Near a road for easy access to markets
b. Near his home for easy access to his fields
c. Near a city for easy access to equipment
d. Near the forest for easy access to newly cleared land

Answers

The farmer practicing slash-and-burn farming is most likely locate his crops near the forest for easy access to newly cleared land. The correct answer is d.

Slash-and-burn farming is a type of agriculture where forests are cleared by cutting and burning vegetation to make way for crops. This type of farming is often practiced by subsistence farmers who have limited access to resources, such as fertilizer or irrigation systems.

The farmer in the Amazon River Basin in Brazil would likely locate his crops near the forest so he can easily clear new land for each crop cycle. The soil in newly cleared areas is typically rich in nutrients, providing ideal conditions for crops to grow. Additionally, by locating their crops near the forest, subsistence farmers can also easily access the resources they need, such as firewood and wild game, to sustain their families.

To learn more about slash-and-burn visit: https://brainly.com/question/4354883

#SPJ4

joints can provide rocks with some porosity and permeability.True or False

Answers

True, joints can provide rocks with some porosity and permeability.

Joints are natural fractures or cracks in rocks that are formed due to various geological processes such as tectonic movements, erosion, and weathering. These joints create spaces or voids in the rocks that allow for the storage and movement of fluids such as water, oil, and gas.

This is known as porosity and permeability, respectively. Porosity refers to the amount of void space in a rock, while permeability refers to the ability of a rock to transmit fluids through its pores and fractures. Therefore, the presence of joints can increase the porosity and permeability of a rock, allowing for the storage and movement of fluids.

Learn more about "porosity" here:

https://brainly.com/question/29311544

#SPJ11

What are types of climate proxy data?

Answers

There are several types of climate proxy data that are used by scientists to study past climate conditions which are Tree rings ,  Ice cores , Coral reefs ,  Sediment cores ,  Fossils.

1. Tree rings: Tree rings provide information about temperature and precipitation levels in a given year. By analyzing the size and density of the rings, scientists can reconstruct climate conditions over the lifetime of the tree.

2. Ice cores: Ice cores are extracted from glaciers and ice sheets and provide information about temperature, precipitation, and atmospheric composition over time. By analyzing the gases and particles trapped in the ice, scientists can reconstruct past climate conditions.

3. Coral reefs: Coral reefs grow in layers, and the composition of each layer provides information about temperature and nutrient levels in the ocean. By analyzing the growth and composition of coral reefs, scientists can reconstruct past ocean conditions.

4. Sediment cores: Sediment cores are extracted from the ocean floor and provide information about past ocean conditions. By analyzing the composition of the sediment, scientists can reconstruct past ocean temperatures and nutrient levels.

5. Fossils: Fossils provide information about the types of plants and animals that lived in a given area at a given time. By analyzing the types of fossils found in a given area, scientists can reconstruct past climate conditions.



Overall, climate proxy data provides valuable information about past climate conditions and helps scientists to better understand the Earth's climate system.

To know more about climate proxy data click on below link:

https://brainly.com/question/23529208#

#SPJ11

How does gravity bring an object back to Earth?

Answers

Gravity pulls you towards the ground because all objects with mass, such as our Earth, actually deform and curve the garment of the universe, known as spacetime. Gravity is the curvature of the earth.

The gravitational force that pulls objects towards the center of an entire globe or other body. The gravitational force keeps all the planetary bodies in a circle around the sun.

The most precise numerical value for gravity's acceleration is 9.8 m/s/s. There are minor variations in this real number (to the second significant digit) that are primarily determined by altitude.

However, gravity is a force in the broadest sense because it defines the resulting relationship between two masses. Gravitational consequences are brings benefits by spacetime warping and object motion through warped spacetime. The end result, however, is as if a force had been applied.

Learn more about gravity here:

https://brainly.com/question/18456451

#SPJ4

Which of the following is an example of cultural assimilation?
A.
A new immigrant from Mexico learns how to speak English after enrolling in an American school.
B.
More Americans watched World Cup soccer in 2010 than in 2006.
C.
Restaurants in California adapt Chinese dishes for American tastes.
D.
The Irish band U2 has a hit record in the US.

Answers

Answer: A) A new immigrant from Mexico learns how to speak English after enrolling in an American school.

Explanation:

Cultural assimilation refers to the process of a minority group adopting the cultural practices and values of the dominant group in a society.

Out of the given options, the best example of cultural assimilation is A) A new immigrant from Mexico learns how to speak English after enrolling in an American school. In this case, the Mexican immigrant is adopting the language and culture of the dominant group (Americans) in order to fit into and participate in American society.

Option B) is an example of cultural diffusion, as it involves the spread of an aspect of one culture (interest in World Cup soccer) to another culture (American). Option C) is an example of cultural appropriation, where one culture borrows elements from another culture without fully understanding or respecting their meaning or history. Option D) is an example of cultural globalization, where the music of a particular culture (Irish) is enjoyed and embraced by people around the world.

A. A new immigrant from Mexico learns how to speak English after enrolling in an American school is an example of cultural assimilation.

Cultural assimilation refers to the process by which individuals or groups adopt the culture and traditions of a dominant society. In this case, the immigrant from Mexico is adopting the culture of the United States by learning to speak English, which is the dominant language in the country. The process of assimilation may involve adopting the values, customs, beliefs, language, and practices of the dominant culture. In this case, the new immigrant is adopting one of the key elements of American culture, which is the English language, in order to integrate into American society.

What is the climate in a temperate forest?

Answers

Answer:

The climate of temperate forests is wet.

Explanation:

These biomes are second in rainfall after rainforests. They average 30 to 60 inches of precipitation a year in the form of rain and snow. temperate deciduous forests have an average temperature of 50 F.

Answer: its wet

Explanation:

which modern english word has come down to us from the ancient egyptian language as their term for the red land?

Answers

The modern English word that has come down to us from the ancient Egyptian language as their term for the "red land" is "desert."

In ancient Egyptian, the word was "deshret," which referred to the red sand and soil of the barren deserts that surrounded the Nile Valley, the birthplace of their civilization. The word "deshret" was eventually transliterated into Greek as "desertum," and then into Latin, where it acquired its current form, "desert."

Over time, the meaning of the word expanded to encompass any arid and barren region, regardless of its color.

You can read more about the ancient Egyptian language at https://brainly.com/question/5639039

#SPJ4

PLEASE HELP RIGHT NOW

Which two countries mentioned in both articles were highly affected by famine?


Question 2 options:

Africa and US


Germany and Somalia


Yemen and Somalia


Yeman and Africa

Answers

Answer:

Yemen and Somalia

Explanation:

These countries HDI scores were rated about 30-40 circa 2007. Hope this helps!

Yemen and Somalia is the best answer choice

what is the definition of mantle in science?

Answers


The mantle is the thick layer of hot, semi-solid rock that lies between the Earth's crust and its core. In science, it is the largest and most massive layer of the Earth, making up about 84% of the Earth's volume. It is composed of silicate rocks that are rich in iron and magnesium.

It is made up of hot, dense rock that is in a semi-solid state and is constantly moving and flowing. The mantle is responsible for the movement of the Earth's tectonic plates, which can cause earthquakes and volcanic eruptions.

The upper mantle is closer to the Earth's crust and is relatively rigid, while the lower mantle is much hotter and more fluid. The boundary between the upper and lower mantle is known as the mantle transition zone.

Scientists study the mantle using a variety of methods, including seismic imaging, laboratory experiments, and computer simulations. Understanding the properties and behavior of the mantle is essential for understanding the structure and evolution of the Earth.

To learn more about mantle:

https://brainly.com/question/28827790#

#SPJ11

identify a way in which Canadians are impacting their environment and one way in which they are trying to manage that impact.

Answers

Answer: geography.

Explanation:

can you ace this US State capitals quiz?

Answers

Yes, any one can ace this US State capitals quiz with enough practice and study. Make sure to focus on memorizing the locations of each state capital.  The geography of USA is very essential for such quizzes.

The US State capitals quiz is a trivia game. It can be played online or on paper, and is a great way to test your knowledge of US geography.

The quiz typically includes all 50 states and their respective capitals, and can be timed or untimed depending on the player's preference.

To know more about quiz here:

https://brainly.com/question/28764526

#SPJ11

Other Questions
a company executive has just bought a new android mobile device. she wants you to help her make sure that it is protected from malware threats. which of the following statements are true in regards to protecting android devices? (select two.) great systems of ________ are the hallmark of great civilizations. Use the Fundamental Counting Principle to find the total number of possible outcomes. How to do high fowler's position What are some famous quotes in Into the Wild? For which reason did Persia attract foreign interest in the early 1900s?A. Oil was discovered in Persia. B. Persia offered very favorable trade agreements. C. Persia had a multitude of untapped natural resources.D. Persia offered very favorable trade agreements. What poem is To be, or not to be? pls solve[tex]\sqrt[3]{343}[/tex] What are thickened regions of muscle that function like valves to control the flow of contents at various points in the GI tract? Identify the countries on the map that made up the axis powers during world war ii. How did the state of Georgia contribute to the United States during World War II? what is article 2 of the constitution summary? The production benchmarks on p. 6 of each issue of the Footwear Industry Report a. provide valuable feedback to company managers regarding the efficiency with they are managing production labor costs, reject rates, and branded manufacturing costs per pair produced at each of their company's production facilities. b. are especially helpful to company managers in determining whether their company is overspending on fringe benefits paid to production workers. c. are especially helpful to company managers in determining whether they need to spend more/less on enhanced styling/features at each of the company's production facilities. d. provide valuable feedback to company managers regarding whether the prices being charged for the company's branded footwear are too high or too low.e. are primarily useful to managers in determining whether their company's total production costs are low enough to enable the company to be profitable if the average wholesale price charged to footwear retailers is equal to the prior-year regional average wholesale price. The basal energy rate is the daily amount of energy (measured in calories) needed by the body at rest to maintain body temperature and the basic life processes of respiration, cell metabolism, circulation, and glandular activity. As you may suspect, the basal energy rate differs for individuals, depending on their gender, age, height, and weight. The formula for the basal energy rate for men is , where b is the basal energy rate (in calories), w is the weight (in kilograms), h is the height (in centimeters), and a is the age (in years). A male patient is 70 years old, weighs 55 kilograms, and is 172 centimeters tall. A total daily caloric intake of 1000 calories is prescribed for him. Determine if his caloric intake is sufficient for his needs and explain why or why not. A. 1000 calories is too much; it is 172 calories past the needed amount. B. 1000 calories is not sufficient; it is 172 calories short. C. 1000 calories is not sufficient; it is 310 calories short. D. 1000 calories is too much; it is 310 calories past the needed amount. On June 1, a widget manufacturer entered into a written agreement with a tool maker in which the tool maker agreed to produce and sell to the manufacturer 12 sets of newly designed dies to be delivered August 1 for the price of $50,000, payable ten days after delivery. Encountering unexpected expenses in the purchase of special alloy steel required for the dies, the tool maker advised the manufacturer that production costs would exceed the contract price; and on July 1, the manufacturer and the tool maker signed a modification to the June 1 agreement increasing the contract price to $60,000. After the timely receipt of 12 sets of dies conforming to the contract specifications, the manufacturer paid the tool maker $50,000 but refused to pay more.Which of the following concepts of the Uniform Commercial Code, dealing expressly with the sale of goods, best supports an action by the tool maker to recover $10,000 for breach of the manufacturer's July 1 promise?a. Bargained-for exchange.b. Promissory estoppel.c. Modification of contracts without consideration.d. Unconscionability in the formation of contracts. A rectangle has a perimeter of 74 centimeters.The length of the rectangle is 5 centimeters less than twice the width.What is the area of the rectangle,in square centimeters? A majorittof delegates at the 1875 constitutional convention fell into which of the following categories? (Select all that apply.)Keen to limit the power of governmentWhiteDemocrats Ali purshacsed a coat that costs 38$ sales tax was 4.5% of the purchase price how much did Ali pay in sales tax In the pilgrims progress, what happens to Christian and his companion, as they attempt to make their way through Vanity Fair. What Impressionist convention did Renoir use in Le Moulin de laGalette?Renoir made sketches from photographs beforepainting the final version.Renoir created idealized figures, based on classicalconventions.Renoir depicted a dance hall, a modern-day leisureactivity.Renoir used smooth brushstrokes and a soft. mutedcolor palette