Which planet moves the fastest and which planet moves slowest?

Hi there!

We know that there are TWO forces acting on the man.

We can express this in an equation. Let DOWN be NEGATIVE, and UP be POSITIVE.

[tex]F_{net} = N - F_g[/tex]

Recall that a SCALE measures the NORMAL FORCE, NOT the WEIGHT. Therefore:

N = 700 N

W = 900 N

[tex]F_{net} = 700 - 900 \\\\F_{net} = -200N[/tex]

Since downward is negative, the net force is acting DOWNWARD.

The mass of water increases, the freezing point of water decreases. and the buoyancy of objects in the water increases may occur when the ocean sanity increases.

Seawater is salty due to a variety of substances. The majority of them arrive via rivers, which bring chemicals dissolved from rock and soil. The most common is sodium chloride, also known as salt.

The most popular approach to quantify salinity is to count the amount of salt in 1,000 g of water, which is referred to as ppt. The majority of the ocean has a salinity of 34 to 36 parts per thousand.

Salinity makes water colder and denser by lowering its temperature. The chilly water sinks to the ocean's depths. Slow currents carry it throughout the marine basins.

Because the items have a lower density, they flow across the water's surface. As a result, the buoyancy of items in water improves.

So the events that may occur when ocean salinity increases will be;

1)The mass of water increases.

2) Freezing point of water decreases.

3) buoyancy of objects in the water increases.

Hence the masses of water increase, the freezing point of water decreases. and the buoyancy of objects in the water increases may occur when the ocean sanity increases.

To learn more about ocean sanity refer to the link;

https://brainly.com/question/1308071

Answer:

b

Explanation:

Answer:

its b, the sun is directly over earths north end

Explanation:

Answer:

45.1 m/s

Explanation:

use the equation v = u + at  substitute the values v = 0 + 9.8×4.6  v = 45.08  round to about 3 s.f v = 45.1 m/s I do apologize if I'm incorrect.

Answer:

The final velocity s 12 m/s.

For the upwards trajectory:   (using the positive value of g in the downward direction)

Vf = Vi - g t = 0   where Vi is initial velocity and Vf the velocity at max height

Vf = 12 - g t = 0      t = 12 / g     time to reach max height

For the downwards trajectory

Vf = Vi + g t = 0 + g t    =  g * 12 / g = 12  where t was found above

We know the from  2 g h = Vf^2 - Vi^2, since the height is the same in both directions, that the ball reaches the ground with at the same speed at which it was sent.

Also, conservation of energy shows that the ball must return to the ground with the speed with which was projected.

Answer:

On Waves. Quantum mechanically, an electron can be described by a wave function oscillating in space and time that has mean values equal to the expectation values of observables corresponding to given operators. ... Electrons are fermions. They are charged particles. in short the quantum theory

i hope its helpful !

Horizontal component of ball, u = 0 m/s.

Height from which it thrown, h = 62 m.

By equation of motion :

[tex]s=ut+\dfrac{at^2}{2}[/tex]

Putting all given equation, we get :

[tex]62=0\times t+\dfrac{10t^2}{2}\\\\t=\sqrt{12.4}\ s\\\\t = 3.52\ s[/tex]

Therefore, time taken is 3.52 s.

Hence, this is the required solution.

Answer: Various wavelengths emitted by an excited substance

Explanation:

Answer:

B. 3

Explanation:

Answer: joule, unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre.

Explanation:

This is a unit used to measure energy or work. One joule is the amount of energy required to produce one watt of power for one second. It's also the work done by a force equal to one newton exerted over a distance of one meter.

Hope this helps!

Answer:

sum of the kinetic and potential energy

Explanation:

Answer:

Hello

a) the change of velocity over time

Answer:

c.the change of velocity over distance

For an accurate design of the pendulum that will match the period, the length of the pendulum clock must be 0.25 m.

The period of oscillation of simple pendulum is calculated as follows;

[tex]T = 2\pi \sqrt{\frac{l}{g} }[/tex]

where;

Make "L" the subject of the formula in the above equation.

[tex]\frac{T}{2\pi} = \sqrt{\frac{l}{g }} \\\\\frac{T^2}{4\pi^2} = \frac{l}{g} \\\\l = \frac{gT^2}{4\pi ^2} \\\\l = \frac{(9.8)(1)^2}{4\pi ^2} \\\\l = 0.25 \ m[/tex]

Thus, the length of the pendulum clock is 0.25 m.

Learn more about period of oscillation here: https://brainly.com/question/20070798

Answer:

helium and hydrogen

Explanation:

The acceleration is derived from the some other quantities like change in velocity / time take . If we see carefully that formula of acceleration you find that it is basically derived from fundamental quantities therefore acceleration is called a derived quantities.

Answer:

[tex]a=155.750\ m/s^2[/tex]

Explanation:

It is given that,

A small rock is shoot at Dennis' neighbor's flowerpots. The rock travels a distance of 12.5 cm from the point at which he pulls it back to the point at which it leaves the slingshot.

Final velocity of the rock, v = 6.24 m/s

The initial velocity of the rock, u = 0 (as it was at rest)

Let a is the acceleration of the rock. It can be calculated using the equation of kinematics as follows :

[tex]v^2-u^2=2ad\\\\\text{Put u = 0 }\\\\v^2=2ad\\\\a=\dfrac{v^2}{2d}\\\\a=\dfrac{(6.24)^2}{2\times 12.5\times 10^{-2}}\\\\a=155.750\ m/s^2[/tex]

So, the average acceleration of the rock is [tex]155.750\ m/s^2[/tex].

•Question⟿What is meant by solenoid?

•Answer⟿If a conducting wire is wound in form of a cylindrical coil whose diameter is less in comparison to its length, the coil is called a solenoid. It looks like a helical spring.

•Question⟿How does a current carrying solenoid behave?

•Answer⟿

Explanation:

current carrying solenoid behaves as an electromagnet. The uniform magnetic field inside it may magnetise a steel rod permanently. Detailed Answer: A coil of many circular turns of insulated copper wire wrapped closely in the shape of a cylinder is called a Solenoid.

hope it helps you :)

Answer:

Potential -> Kinetic -> Potential ->

Explanation:

Point A is potential becuase it's stopped (its energy isn't released). Point B is where that potential energy is released and turned into Kinetic energy. And point C is where potential energy is stored again. Same with point D.

Answer:

400 m/s

Explanation:

If it is moving at a velocity of 80 m/s from rest, then after 5 s it would be at 400 m/s.

80 x 5 = 400

Answer:

the pressure will be 297.01 kpa

Answer:

Explanation:

4.0/5

10

author link

AL2006

Ace

21.2K answers

267.7M people helped

Electrical power  =  (voltage) x (current)

Electrical energy  =  (power) x (time)

Combine those definitions:

            Energy  =  (voltage) x (current) x (time)

Divide each side by (voltage x time), and we have

            Current  =  Energy / (voltage x time)

You told us that

            Energy = 1.8 x 10⁷ joules

            Time  =  1 hour  =  3,600 seconds

so we have

            Current  =  (1.8 x 10⁷) / (voltage x 3,600).

If you live in the US, Canada, or Mexico, your voltage is 120 volts.

            Current = (1.8 x 10⁷) / (120 x 3,600)  =  41-2/3 Amperes

If you live practically anywhere else in the world, your voltage is 240 volts.

             Current = (1.8 x 10⁷) / (240 x 3,600)  =  20-5/6 Amperes.

Answer:

A

Explanation:

i just did this on usatestprep the answer A

Answer:

Gravity, Friction, Air resistance, magnetism, static electricity

Explanation:

Answer:

gravity friction air resistant are a few

Answer:

light waves can travel in vacuum but sound waves require a medium to travel

also light waves are electromagnetic waves while sound waves are mechanical, light waves are transverse waves while sound waves are longitudinal waves

While sound waves are mechanical, light waves are electromagnetic. Unlike sound waves, which are longitudinal, light waves are transverse. Light waves can go across a vacuum. Since sound waves need a physical medium to move through, they cannot move in a vacuum.

The pattern of disruption brought about by the movement of energy through a medium (such as air, water, or any other liquid or solid matter) as it spreads away from the source of the sound is known as a sound wave. Pressure waves are generated by item vibrations that cause sound waves, such as those from a ringing phone.

Unlike sound waves, which need a medium to propagate, light waves may travel in a vacuum.

Additionally, light waves are transverse waves whereas sound waves are longitudinal waves and light waves are electromagnetic waves.

To know more about sound waves:

https://brainly.com/question/29767263

#SPJ2

Answer:

f

Explanation:

A) The PBR catalyst weight that is required to achieve 80% conversion in the absence of pressure drop is : 370 mg  

B) The fluidized CSTR catalyst weight necessary to achieve 80% conversion is : 995.025 g

To calculate the PBR catalyst weight required to achieve 80% conversion in the absence of pressure drop we will apply the equation below

w = [tex]\frac{V_{o} }{KC_{ao}(1/x - 1 ) }[/tex]  ---- ( 1 )

insert values into equation ( 1 )

w = [tex]\frac{50 kmol}{0.54 * 10 (\frac{1}{0.8}) * 1 }[/tex]

PBR catalyst weight ( w ) = 370 mg

applying the equation below

W = [tex]\frac{Fbwx}{-r'Bu}[/tex]

   = [tex]\frac{50kmol/r * 0.8}{0.042mol/gcat.h}[/tex]

   = 995.025 gcat

Hence we can conclude that The PBR catalyst weight that is required to achieve 80% conversion in the absence of pressure drop is : 370 mg  The fluidized CSTR catalyst weight necessary to achieve 80% conversion is : 995.025 g.

Learn more about Dehydration of butanol : https://brainly.com/question/7140413

Image C is a convex lens.An optical lens is made up of two spherical surfaces is convex lens.Its surfaces are curved outwards.

An optical lens is made up of two spherical surfaces is convex lens The lens is called a biconvex lens or simply convex lens if those surfaces are curved outwards.

Converging lens is another name for it. It's because it brings all the light rays that are parallel to the primary axis together at the focus point (F).

The picture created by a convex lens is always real and inverted. The produced image is virtual and erect when the item is positioned between the focus and the optical center of the lens.

Hence image C is a convex lens.

To learn more about the convex lens refer to the link;

https://brainly.com/question/1604692

Answer:

C

Explanation:

Answer:b

Explanation: