Answers
Answer:
Aluminium Sulphate
Explanation:
Aluminium sulphate is the most widely used aluminium coagulant. It is soluble in water and used as a coagulating agent in purification of drinking water and in waste water treatment plants.
Answer:
where are you from .. ...
Related Questions
A 508-g sample of sodium bicarbonate (NaHCO3) contains how many moles of sodium bicarbonate (NaHCO3)?
Answers
molar mass = (22.99) + (1.01) + (12.01) + 3(16.00)
molar mass = 84.01 g/mol
//
(508g)(1 mol/84.01 g) = 6.0
There are 6.0 moles of sodium bicarbonate
A 508-g sample of sodium bicarbonate (NaHCO3) contains 0.6 moles of sodium bicarbonate (NaHCO3)
What is mass?Mass is defined as a dimensionless quantity representing the amount of matter in a particle or object. The SI unit of mass is kg.
Mole is defined as a standard scientific unit for measuring large quantities of very small entities
Molar mass = 22.99 + 1.01 + 12.01 + 3x16.00
= 84.01 g/mole
Moles of NaHCO3
= 508 g x 1 mole / 84.01
= 6.0 moles
Thus, 508-g sample of sodium bicarbonate (NaHCO3) contains 0.6 moles of sodium bicarbonate (NaHCO3)
To learn more about mass, refer to the link below:
https://brainly.com/question/19694949
#SPJ2
What causes red blood cells to become sickle-shaped in a person with sickle
cell anemia?
A. Inheriting a specific gene
B. Eating a diet lacking a specific vitamin
C. Breathing in a specific pathogen
D. Touching a specific plant toxin
Answers
Answer:
A. Inheriting a specific gene
Explanation:
I hope this helps! ^^
☁️☁️☁️☁️☁️☁️☁️
Answer:
A. inheriting a specific gene
Explanation:
because sickle cell anemia is caused by a mutation in the gene responsible for making hemoglobin that makes blood red and enable the rbcs to carry o2 from lungs to the whole body.
but both mother and father must pass the defective gene to the child to be sick with sickle cell anemia otherwise the child will carry the gene but shows no sign of the anemia.
What does it mean for heat to be transferred by thermal conduction?
Answers
Answer:
thermal energy
Explanation:
Thermal conduction is the diffusion of thermal energy (heat) within one material or between materials in contact. The higher temperature object has molecules with more kinetic energy; collisions between molecules distributions this kinetic energy until an object has the same thermal energy throughout.
Answer:
energy is transferred when one molecule collides with another.
Explanation:
aP33x
Which ecosystem is most resilient to change due to its high diversity?
mountain meadow
stormwater pond
coral reef
arctic tundra
Answers
stormwater pond .............
Coral reefs are believed to be the most diverse of any ecosystem. Hence it is most resilient to change due to its high diversity. Thus, option c is correct.
What are coral reefs ?Coral reefs are sometimes referred to as the "rainforests of the sea" due to the richness of life that can be found there. The health of coral reefs is essential for around 25% of the ocean's fish. In the many crevices created by corals, fish and other species find shelter, food, breed, and raise their young.
More than 7,000 different kinds of fish, invertebrates, plants, sea turtles, birds, and marine mammals may be found here. Coral reefs offer chances for recreation, serve as a barrier against erosion and storm damage, and support local economies. They are also a source of fresh medications and food.
More than 500 million people rely on reefs for safety, income, and food. On and around reefs, fishing, diving, and snorkeling generate hundreds of millions of dollars for nearby businesses. Hence, option c is correct.
Find more on coral reefs:
https://brainly.com/question/15794949
#SPJ6
A fat is composed, in part, of long chains of carbon and hydrogen. This fat as a molecular
mass of 847 grams/mole and an empirical formula of C9H170. Determine the molecular
formula.
Answers
Answer:
[tex]C_{54}H_{102}O_6[/tex]
Explanation:
Hello!
In this case, since the molar mass of the empirical formula is:
[tex]MM_{empircal}=9*12.01+17*1.01+16.00=141.26g/mol[/tex]
Thus, the ratio of the molecular to the empirical formula is:
[tex]\frac{847g/mol}{141.26g/mol} =6.0[/tex]
Thus, the molecular formula is six times the empirical formula:
[tex]C_{54}H_{102}O_6[/tex]
Best regards!
Describe the process for the separation of water and water soluble matter.
Sive an important difference of each of the following pair.
Solid and liquid
b. Liquid and gas
Solid and gas
d. Melting and freezing
Vapourization and condensation. f. Melting and sublimation.
Filtration and evaporation, 1. Sedimentation and decantation,
Homogeneous and heterogenous mixture
Water insoluble and water soluble matter
Write T for true and F for false statements.
All matters are visible.
Air is a matter.
The tiny particles of matter are called molecule.
தங்கம்
Answers
Answer:
Describe the process for the separation of water and water soluble matter.
Sive an important difference of each of the following pair.
Solid and liquid
b. Liquid and gas
Solid and gas
d. Melting and freezing
Vapourization and condensation. f. Melting and sublimation.
Filtration and evaporation, 1. Sedimentation and decantation,
Homogeneous and heterogenous mixture
Water insoluble and water soluble matter
Write T for true and F for false statements.
All matters are visible.
Air is a matter.
The tiny particles of matter are called molecule.
தங்கம்
Which of the following is true?
A)If we know that a reaction is an elementary reaction, then we know its rate law.
B)The rate-determining step of a reaction is the rate of the fastest elementary step of its mechanism.
C)Since intermediate compounds can be formed, the chemical equations for the elementary reactions in a multistep mechanism do not always have to add to give the chemical equation of the overall process.
D)In a reaction mechanism, an intermediate is identical to an activated complex.
E)all of these statements are true.
Answers
Answer:
If we know that a reaction is an elementary reaction, then we know its rate law.
Explanation:
An elementary reaction is a reaction that takes place in one reactive encounter. This means that the two species interact in a single step to give the products.
If two reactants interact in a single step to yield the products then we can easily deduce the rate law from the reaction equation.
For instance, For the reaction;
2A + B → C
The rate law is
rate = k[A]²[B].
If the reaction is an elementary reaction and the equation of the reaction is balanced, then we can deduce the rate law from the balanced reaction equation.
What are simple sugars
Answers
Answer:
Simple sugars are a type of carbohydrate.
Explanation:
Carbohydrates are one of the three basic macronutrients — the other two being protein and fat. Simple sugars are found naturally in fruits and milk, or they can be produced commercially and added to foods to sweeten, prevent spoilage, or improve structure and texture.
When two substances combine to form a mixture, the properties of the substances change. True False
Answers
Answer:
Tell students that sometimes when two (or more) substances are mixed together, a change occurs and another substance (or substances) is created. This is called a chemical reaction. Gas may form, heat may be produced, and color may change. These types of changes indicate that a chemical reaction has occurred.
A taco from a fast food restaurant contains 7.0 g of fat, 25. g of carbohydrate, and 11 g of protein. How many kJ of energy does the cheeseburger contain? (The caloric values for foods are 38 kJ/g for fat, for carbohydrate, and 17 kJ/g for protein.)
Answers
Answer: 878 kJ of energy is there in cheeseburger
Explanation:
Given : calorific value of fat = 38kJ/g
calorific value of carbohydrate = 17 kJ/g
calorific value of protein = 17kJ/g
1 g of fat contains energy = 38 kJ
7.0 g of fat contains energy = [tex]\frac{38}{1}\times 7.0=266 kJ[/tex]
1 g of carbohydrate contains energy = 17 kJ
25 g of fat contains energy = [tex]\frac{17}{1}\times 25=425kJ[/tex]
1 g of protein contains energy = 17 kJ
11 g of protein contains energy = [tex]\frac{17}{1}\times 11=187kJ[/tex]
Total energy = (266+425+187) kJ = 878 kJ
WRITE A 3-4 SENTENCE SUMMARY ABOUT ATOMS.
Answers
Answer:
An atom is the smallest unit of matter that retains all of the chemical properties of an element. Atoms combine to form molecules, which then interact to form solids, gases, or liquids. For example, water is composed of hydrogen and oxygen atoms that have combined to form water molecules.
Explanation:
Answer:
Atom is the smallest particle in the universe. An atom is made up of sub-atomic particles. They are the protons (positively charged particle), electrons (negatively charged particles) and neutrons neutrally charged particles). The lightest atom ever known is Hydrogen atom. An atom is electrically neutral. When a atom looses or gains and electrons it is called an ions.
Which of the following statements best goes with the Law of Conservation of Energy?
all energy conversions are 100% efficient
O all energy from the sun is transferred to organisms directly by the 10% rule
O all of the sun's energy is either transformed into kinetic energy, and eventually heat energy
O all matter cannot be created or destroyed
Answers
Answer:
all letter cannot be created or destroyed just transformed
g When water and perchloric acid (HClO4) are mixed, heat is released. The resulting solution is not an ideal solution, in terms of Raoult’s Law. How should the boiling point and the vapor pressure of a solution of HClO4 in H2O differ from what is expected for an ideal solution? A) boiling point higher than expected, vapor pressure lower than expected B) boiling point higher than expected, vapor pressure higher than expected C) boiling point lower than expected, vapor pressure lower than expected D) boiling point lower than expected, vapor pressure higher than expected E) boiling point and vapor pressure are both the same as expected for an ideal solution
Answers
Answer:
A) boiling point higher than expected vapor pressure lower than expected.
Explanation:
When water is introduced with heat it vaporize at a temperature of 100 degree centigrade. When hydrochloric acid is added to the water its boiling point of water increases slightly. The difference in the boiling point is due to the presence of heavier molecules in acid.
A 1 mL sample weighs 4 g, the density of the sample is
Answers
D=m/v
mass in this case is 4 g
volume is either mL or cm^3 and in this case its 1 mL so
D=4 g/1 mL
D=4 g/mL
what is the purpose of sand bath in preparation of ethane
Answers
Answer:
The sand bath spreads the heat out so that the flask is heated evenly. This reduces the chance of the flask breaking and ensures that there are no hot spots in the reaction mixture which could lead to excessive charring,
Explanation:
What is geberal formula for alkane?
Answers
Answer:
CnH2n+2
Explanation:
Alkane have double and two atoms of hydrogen than carbon atoms
Like C4H10
n = 4
CnH2n+2
C4H2×4+2
C4H10
Which of the following is a redox reaction?
A. CuO + H2SO4 → CuSO4 + H2O
B. 3MnO2 + 4A1 3Mn + 2A120,
C. MgCO, → MgO + CO2
D. Mg(OH)2 + 2HCl → MgCl2 +H20
Answers
Answer:
a
Explanation:
the answer to the question is a
Among the following chemical equations, redox reaction is [tex]3 MnO_2+4 Al\rightarrow 3 Mn +2 Al_2O[/tex].
The redox reaction can be defined as a reaction that involves the transfer of electrons between two species. Redox reactions comprise of two parts a reduced part and an oxidized part, which occur simultaneously . The part which is reduced gain electrons and hence there is a increase in oxidation state of the species.
While, the part which is oxidized looses electrons and hence there is a decrease in oxidation state of the species.During redox reactions, there is no net change in the number of electrons . Electrons which are given off in oxidation are used up in reduction.
Therefore, the correct option is B.
Learn more about redox reactions,here:
https://brainly.com/question/28300253
#SPJ4
The mass of a dust particle would be measured in?
Answers
how would you explain to an elementary school student what the periodic table is?
Answers
Answer: The periodic table is a chart where different types of elements organized by what they have in common.
Explanation:
analyze how animals benefit from the process of photosynthesis in plants
Answers
Answer:
Animals benefit from photosynthesis, because they consume the plants and therefore the sugars stored in the plants from the process of photosynthesis for energy
Explanation:
In an experiment, 20cm^3 of 0.2dm^3 NaOH reacted with 32.0cm^3 of H2SO4 solution. Calculate the concentration of the H2SO4 in a) mol dm^-3 and b) g dm^-3
Answers
Answer:
A. 0.0625 moldm¯³
B. 6.125 gdm¯³
Explanation:
We'll begin by writing the balanced equation balance equation for the reaction. This is illustrated below:
2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O
From the balanced equation above,
The mole ratio of the acid, H₂SO₄ (nₐ) = 1
The mole ratio of the base, NaOH (n₆) = 2
A. Determination of the concentration of the acid in moldm¯³.
Volume of base, NaOH (V₆) = 20 cm³
Concentration of base, NaOH (C₆) = 0.2 moldm¯³
Volume of acid, H₂SO₄ (Vₐ) = 32 cm³
The mole ratio of the acid, H₂SO₄ (nₐ) = 1
The mole ratio of the base, NaOH (n₆) = 2
Concentration of acid, H₂SO₄ (Cₐ) =?
CₐVₐ / C₆V₆ = nₐ / n₆
Cₐ × 32 / 0.2 × 20 = 1 / 2
Cₐ × 32 / 4 = 1 / 2
Cross multiply
Cₐ × 32 × 2 = 4 × 1
Cₐ × 64 = 4
Divide both side by 64
Cₐ = 4 / 64
Cₐ = 0.0625 moldm¯³
Therefore, concentration of the acid in moldm¯³ is 0.0625 moldm¯³
B. Determination of the concentration of the acid in gdm¯³.
Concentration (moldm¯³) = 0.0625 moldm¯³
Concentration (gdm¯³) =?
Next, we shall determine the molar mass of the acid, H₂SO₄. This can be obtained as follow:
Molar mass of H₂SO₄ = (2×1) + 32 + (4×16)
= 2 + 32 + 98
= 98 g/mol
Finally, we shall determine the concentration of the acid in gdm¯³. This can be obtained as follow:
Concentration (moldm¯³) = 0.0625 moldm¯³
Molar mass of H₂SO₄ = 98 g/mol
Concentration (gdm¯³) =?
Conc. (moldm¯³) = conc. (gdm¯³) / Molar mass
0.0625 = Conc. (gdm¯³) / 98
Cross multiply
Conc. (gdm¯³) = 0.0625 × 98
Conc. (gdm¯³) = 6.125 gdm¯³
Thus, the concentration of the acid in gdm¯³ is 6.125 gdm¯³
what does the picture depict about ecology?
Answers
9-fluorenone was isolated and purified from a crude mixture containing chloroanilic acid and benzocaine dissolved in diethyl ether. Arrange the various steps carried out experiment:
a. Drain off the remaining organic from the tip of the separatory funnel
b. Weight out the product and determine Its MP
c. Mix/vent then drain off the organic layer
d. Add sodium sulfate to the aqueous layer to remove aw residua' water
e. Add the crude reaction mixture to the separatory funnel
f. Extract chloroaniIic acid by adding 5%. HCl solution to the crude reaction mixture
g. Extract benzociane by adding 5% HCI solution to the crude reaction mixture
h. Decant the into a round bottom flask and use the rotavap to evaporate solvent
i. Extract benzociane by adding 5% NaOH solution to the organic layer
j. Extract chloroanilic acid by 5% NaOH to to organic War
k. Add sodium sulfate to the organic layer to remove any residual water
l. Mix/vent then drain off the aqueous layer
Answers
Answer:
Explanation:
[tex]\text{The steps shown below indicate the rearrangement of the experiment.}[/tex]
[tex]\text{e. Add the crude reaction mixture to the separatory funnel}[/tex]
[tex]\text{f. Extract chloroaniIic acid by adding 5\%. HCl solution to the crude reaction mixture }[/tex]
[tex]\text{l. Mix/vent then drain off the aqueous layer}[/tex]
[tex]\text{i. Extract benzociane by adding 5\% NaOH solution to the organic layer}[/tex]
[tex]\text{c. Mix/vent then drain off the organic layer}[/tex]
[tex]\text{d. Add sodium sulfate to the aqueous layer to remove aw residual water}[/tex]
[tex]\text{a. Drain off the remaining organic from the tip of the separatory funnel}[/tex]
[tex]\text{h. Decant the into a round bottom flask and use the rotavap to evaporate solvent}[/tex]
[tex]\text{b. Weight out the product and determine Its MP}[/tex]
describe how the root systems of the mesquite tree and saguaro cactus root systems different. PLZ help me
Answers
Answer:
the mesquite trees roots go down into the grown, while the saguaro cactus is going to the sides.
Who made the first periodic table
Answers
The correct answer is Dmitri Mendeleev
What would be the structural formula for sodium fluoride? (NaF)
Answers
Answer:
Formula and structure: The chemical formula of sodium fluoride is NaF and its molar mass is 41.99 g/mol. It is a simple ionic compound, made of the sodium (Na +) cation and fluoride (F -) anion. The solid salt exists as cubic crystals similar to the crystal structure of sodium chloride (NaCl).
Explanation:
What is the formula for Pentasulfur heptaoxide
Answers
Answer:
S5O7
Explanation:
The image shown here is a good illustration of which law?
Answers
Answer:
The answer is A.Newton's First law
Why do the oil and vinegar separate into layers when they are stirred together, but completely mix when lecithin is stirred in?
Answers
Answer:
See explanation
Explanation:
Vinegar and oil have different densities, as such we expect the two substances to separate when mixed. However, oil constitutes the organic phase(water insoluble) while vinegar constituents the aqueous phase since it is water soluble. Therefore, the two substances separate into layers when left to stand for a while.
The structure of lecithin makes it a good emulsifier. Hence, it can be able to cause oil and vinegar to mix, constituting a single phase when lecithin is stirred in.
Vinegar molecules and oil molecules are not attracted to one another. Lecithin is attracted to both vinegar molecules and oil molecules. Due to this attraction, lecithin can cause vinegar and oil to mix evenly.
Due to their immiscibility, oil and vinegar separate into layers when they are mixed together. Oil is non-polar, but vinegar (which is acetic acid that has been diluted) is polar. Because of their different polarity, these compounds are said to be "immiscible," which means they do not mix well or create a stable solution when combined. When you stir oil and vinegar together, the agitation causes them to mix to some extent at first, but the various interactions between their molecules cause them to quickly separate into distinct layers.
To know more about miscibility, here:
https://brainly.com/question/30530422
#SPJ6
Which is an acceptable Lewis structure for a diatomic nitrogen molecule?
OA NEN
OB.
N
N
O C.
:N
N:
OD.
NEN
OENEN
Answers
Answer:
:N:::N:
Explanation: 10 valence electrons betwwen the 2
need an octet
and N needs 5 for a neutral formal charge
An acceptable Lewis structure for a diatomic nitrogen molecule is
:N:::N: .Option C is correct. This is further explained below.
What is Lewis structure for a diatomic nitrogen molecule?Lewis structure for a diatomic nitrogen molecule simply refers to the triple bond exists between two nitrogen atoms in the N2 Lewis structure.
In conclusion, The nitrogen molecule is diatomic, which means it is made up of two atoms of the same element.
Read more about Molarity
https://brainly.com/question/9149034
#SPJ5