Which of these events is most likely to occur as a result of the prominence?


1. The corona would become visible


2. The auroras would become visible


3. The sun's photosphere would be blocked


4. The sun's magnetic effect would decrease

Answers

Answer 1

The most likely event to occur as a result of a prominence on the Sun is option 2: The auroras would become visible.

A prominence is a large, bright, and relatively cool plasma structure that extends outward from the Sun's surface into the corona. It is associated with magnetic fields and is often observed as a loop or curtain-like structure. When a prominence erupts or releases material, it can lead to the formation of a coronal mass ejection (CME). Coronal mass ejections are large bursts of plasma and magnetic fields from the Sun that can travel through space. When a CME interacts with Earth's magnetosphere, it can cause geomagnetic storms. These storms can trigger the phenomenon known as the auroras, which are displays of colorful lights in the Earth's polar regions. As the CME and its associated magnetic fields interact with Earth's magnetosphere, they can cause the charged particles in the atmosphere to emit light, leading to the formation of auroras. The auroras are typically seen in high-latitude regions such as the Arctic (Northern Lights) and Antarctic (Southern Lights). Therefore, when a prominence leads to a CME and subsequent interaction with Earth's magnetosphere, it is most likely that the auroras would become visible as a result of this solar event.

Learn more about magnetic field here:

https://brainly.com/question/30331791

#SPJ11


Related Questions

Which is one of the Lewis structures for ozone?
000
:0:00
C:6

Answers

Answer:

D

Explanation:

Option D is the correct Lewis structure of ozone.

Ozone is known to be an allotrope of oxygen which has three atoms of oxygen.

In the Lewis structure of ozone, one pair of oxygen is actually double-bonded while the other is single-bonded. In this structure, two oxygen atoms carry charges. In the drawing the Lewis structure of ozone, we discover that one oxygen atom of the ozone has a -1 charge and while another oxygen atom of the ozone has a +1 charge.

Plssss helppp quick it’s for science and I don’t get it

Answers

im pretty sure its october 16?

define satt and give an example?​

Answers

Answer:

Heyy..Here is your answer..

Satt is the German word for full and it most likely comes from the same Latin word that saturated.

Hope it helps..!!

A cation with a +4 charge has 26 neutrons and 18 electrons. What is the identity of the element?

Answers

mag aral wag puro brainly

Which is the correct number of moles of NO that is produced from 13.2 moles of oxygen
gas, O2?
4NH3 + 502 —> 4N0 + 6H2O

Answers

Answer:

10.6 mol NO

General Formulas and Concepts:

Math

Pre-Algebra

Order of Operations: BPEMDAS

Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right

Chemistry

Stoichiometry

Using Dimensional AnalysisExplanation:

Step 1: Define

[RxN - Balanced] 4NH₃ + 5O₂ → 4NO + 6H₂O

[Given] 13.2 mol O₂

Step 2: Identify Conversions

[RxN] 5 mol O₂ → 4 mol NO

Step 3: Stoich

[DA] Set up:                                                                                                     [tex]\displaystyle 13.2 \ mol \ O_2(\frac{4 \ mol \ NO}{5 \ mol \ O_2})[/tex][DA] Multiply/Divide [Cancel out units]:                                                         [tex]\displaystyle 10.56 \ mol \ NO[/tex]

Step 4: Check

Follow sig fig rules and round. We are given 3 sig figs.

10.56 mol NO ≈ 10.6 mol NO

If one of the cars began with 5.6 liters of gasoline and oxygen, how much water and carbon dioxide do you think would be produced from that gasoline and oxygen?

Answers

Answer

5.6 L

Explanation:

whatever you start with, you end with the same amount.

(LAW OF CONSERVATION)

The amount of oxygen and gasoline that can be produced is 5.6 liters

The question above is answered with the law of conversation of mass. This law of conversation of mass states that  no form of energy can be destroyed, instead it is changed from one form to another type of form.

In this law, it is expected that you end with the same amount you started with. According to the question above, since the amount that you started  with is 5.6 liters then you will end with 5.6 liters also.

Please see the link below for more information

https://brainly.com/question/13383562?referrer=searchResults

Match each term to its description. Match Term Definition Excess reactant A) Amount of product predicted to be produced by the given reactants Limiting reactant B) Reactant that can produce more of the product Theoretical yield C) Reactant that can produce a lesser amount of the product

Answers

Answer:

Excess reactant - Reactant that can produce more of the product

Limiting reactant - Reactant that can produce a lesser amount of the product

Theoretical yield - Amount of product predicted to be produced by the given reactants

Explanation:

In every chemical reaction, there is a limiting reactant and there is an excess reactant.

The limiting reactant determines the amount of product obtained. It is the reactant that produces a lesser amount of the product.

The excess reactant is known to be the reactant that produces a greater amount of the product.

The theoretical yield is calculated using the limiting reactant and is the amount of product predicted to be produced by the given reactants.

Someone help me please!!!

Answers

A. 6 moles

B. 9 moles

C. 3 moles

D.  20 moles

I think please check me, in case I am wrong


The solubility of substance (Z) is 40g/100ml of water at 25°C. A)Can you
make a saturated solution if you add 120 g. of (Z) to 450ml of water at
25°C?

-
can anyone help me?!!!??!?!​

Answers

Answer:

No, It would be a unsaturated solution

Explanation:

The solubility of a compound gives us information about how a compound may dissolve or not in a determinate solvent.

In this case we have Z, which in 25 °C the solubility of this compound is 40g/100 mL water. This means that if we have 60 g of Z and try to dissolve it in 100 mL of water, only 40 g of Z will solve and the remaining 20 g will be in the water as precipitate or remaining solid.

Now if you just put 40 g of Z in 100 mL water, it will dissolve completely in water, and in this case, we have a saturated solution. A saturated solution is when you dissolve a determinated quantity of a solute in a determinated quantity of solvent, without remaining of solid or excess of solvent.

According to this explanation, we now have 120 g of Z. To make a saturated solution of Z with this quantity, well, let's do math. If 40 g dissolves in 100 mL, then 80 g would be 200 mL and 120 g would have to be 300 mL of water. But in this case, we have 450 mL of water, we have more than 300 mL, an excess of water, so, the 120 g will dissolve but it's dissolved in more than the needed quantity to be a saturated solution, therefore, we have an unsaturated solution of Z (more solvent than the needed).

Hope this helps.

How many eggs are in 1 mole of eggs?

Answers

Answer:

I believe it is Avogadro's number: 6.022 × 10²³

Explanation:

One mole of a substance is equal to 6.022 × 10²³ units of that substance

Which energy transformation describes what occurs in a circuit? (select
the BEST answer)
chemical --> electrical --> light
thermal --> chemical --> light
electrical --> thermal --> light
Olight --> thermal --> chemical

Answers

Answer:

electrical --> thermal --> light

Explanation:

Answer:

electrical--> thermal--> light

20 mL of NaOH solution was added to the conical flask. Indicator was added & titrated with 0.1 M HCl solution. The HCl used in the titration was read as 18.3 mL. What is the molar concentration of NaOH?

Answers

Answer:

[NaOH] = 0.1 Molar ... Note => the brackets around formula;i.e., "[ ]" is generally accepted in the chemistry community as concentration in Molar terms.

Explanation:

The metathesis rxn, or double replacement rxn, equation is:

(Molarity x Volume) of acid = (Molarity x Volume) of base, or

(M·V)acid = (M·V)base => M(base) = M·V(acid)/V(base)

= 0.1M × 18.3ml / 20ml = 0.0915M(base) = 0.1M (1 sig-fig) = [NaOH]

If an element is very reactive, is it more likely to be found in elemental state or in a compound?

Answers

Answer:

Compound state

Explanation:

Because reactive elements mostly react immediately with other elements

How many moles of Na2SO4 can be made with 7.28 mol of H2SO4?

Answers

Answer:

7.28 mol Na2SO4

Explanation:

Since it is already in moles, all we have to do is use a molar ratio

A molar ratio is the proportions of reactants and products using the balanced equation. When writing a mole ratio, the given information must cross out with the right thing.

7.28 mol H2SO4 * 1 mol Na2SO4/1 H2SO4 = 7.28 mol Na2SO4

*notice how the H2SO4 crosses out

This image shows a...​

Answers

Answer:

I think is the last one!!!! punnet square ⬜

Using the formula :Force × Distance = Work Perfomed , Match the Force × Distance problems with their correct Work Performed answer?

Answers

what are the problems tho? send pic

HELP ASAP GIVING BRAINLIEST FIVE STARS AND HEART!
Answer with at least 5 sentences in your own words:
What are two properties of electromagnetic radiation?

Answers

Answer: In empty space, electromagnetic radiation will fly. Some kind of material must pass across most other forms of waves. In order to be heard, for instance, sound waves require either a gas, solid, or liquid to travel through.

Which of the following is true about daughter cells?
A
They are genetically identical.

B
They each have their own nucleus.

C
They will most likely undergo mitosis.

D
all of the above

Answers

d. all of the above

AnswerD:

Explanation:

please help me!! (brainliest)

Answers

Answer:

ok

Explanation:

How is a gamete different from other types of cells in a person's body?

Answers

The human gametes differ from all the other cells in the body because the somatic cells have a complete set of chromosomes

When silver nitrate (AgNO3) dissolves in water, the temperature of the solution decreases.
Explain your answer

Answers

Answer:

The enthalpy of solution for AgNO3 is positive because the temperature of the solution decreases (the dissolution is endothermic). Hsol = Hsolute + Hsolvent + HmixHsolute and Hsolvent are endothermic because energy is required to overcome intermolecular forces and separate solute and solvent particles.

Answer:

the enthalpy of solution for agno3 is positive because the temperature of the solution decreases. (the dissolution is endothermic.)

Delta H sol=delta HSolute +delta H solvent +delta H mix

HSolute and H solvent are endothermic because energy is required to overcome intermolecular forces and separate solute and solvent particles.

H mix is exothermic because energy is released when intermolecular forces form between solute and solvent particles.

if the overall enthalpy of solution is positive, then HSolute + H solvent must be larger in magnitude than H mix.

Explanation:

correct on edge2021

Which type of organism is responsible for performing the majority of nitrogen fixation?

Answers

Answer:

B. bacteria

Explanation:

they are responsible for the fixation of nitrogen

Answer:

the answer is B bacteria



What is the approximate volume of 280 g of chlorine gas (Cl2) at STP

Answers

Answer:

78 L Cl₂

General Formulas and Concepts:

Math

Pre-Algebra

Order of Operations: BPEMDAS

BracketsParenthesisExponentsMultiplicationDivisionAdditionSubtractionLeft to Right

Chemistry

Atomic Structure

Reading a Periodic TableSTP (Standard Conditions for Temperature and Pressure) = 22.4 L per mole at 1 atm, 273 K

Stoichiometry

Using Dimensional AnalysisExplanation:

Step 1: Define

280 g Cl₂

Step 2: Identify Conversions

[PT] Molar Mass of Cl - 35.45 g/mol

Molar Mass of Cl₂ - 2(35.45) = 70.90 g/mol

[STP] 1 mol = 22.4 L

Step 3: Convert

[DA] Set up:                                                                                                   [tex]\displaystyle 280 \ g \ Cl_2(\frac{1 \ mol \ Cl_2}{79.90 \ g \ Cl_2})(\frac{22.4 \ L \ Cl_2}{1 \ mol \ Cl_2})[/tex][DA] Multiply/Divide [Cancel out units]:                                                       [tex]\displaystyle 78.4981 \ L \ Cl_2[/tex]

Step 4: Check

Follow sig fig rules and round. We are given 2 sig figs.

78.4981 L Cl₂ ≈ 78 L Cl₂

The number of......... in an atom is the difference between the mass number and the atomic number

A-Electrons

B-Neutrons

C-Protons​

Answers

Answer: While the mass number is the sum of the protons and neutrons in an atom, the atomic number is only the number of protons. The atomic number is the value found associated with an element on the periodic table because it is the key to the element's identity.

MARK ME BRAINLIST

Neutrons is the answer

The bouncing of a wave off an object is called a what


Answers

Answer:

Reflection-energy waves bouncing off the surface of an object

Explanation:

Which of the following is not an organ in the nervous system?

Answers

Where are the options
I’m just gonna guess the options, but if one of them is Vagus, than that’s the answer.

BRAINLIST!!

Which of the following describes a process of weathering?

A.
Rocks along the coast are broken up by waves crashing into the shore.
B.
Glaciers carry boulders from mountaintops to low-lying plains.
C.
Mud, silt, sand, and pebbles are carried across the region by running water.
D.
The wind lays down sediment to form small hills called dunes.

Answers

Answer:

D or C.

Explanation:

Sorry if its wrong

Answer:

A. Rocks along the coast are broken up by waves crashing into the shore.

Explanation:

What is (1.20 x 104 m) x (3.070 x 102m)

Answers

The answer should be 39079.872 m2 (squared)

Why is 1/t used as a measure of rate of reaction?​

Answers

1/t denotes that the reaction order is of the first order. That is, the rate of reaction is directly proportional to the concentration of the reactant. Because scientists use standard units, 1/t equals one divided by one second.

What do you mean by first order reaction ?

The term first order reaction is defined as a chemical reaction in which the reaction rate is linearly dependent on the concentration of only one reactant.

In other words, a first-order reaction is a chemical reaction in which the rate varies as the concentration of only one of the reactants changes.

Because a reaction that takes longer to complete is obviously a slower reaction. A fast reaction is one that takes less time to complete. 1/t simply provides a quantitative value for comparing reaction rates.

Thus, 1/t denotes that the reaction order is of the first order.

To learn more about the first order reaction, follow the link;

https://brainly.com/question/12209424

#SPJ2

BRAINLIEST Give examples of at least three critical questions of society that science can help answer.

Answers

Answer:

1. How did life begin?

2. Are we alone in the universe?

3. What makes us human?

Other Questions
sketch vc(t) for - 0.2 t 0.5 s . plot the points for the values of t that are separated by the step t = 0.1 s . InstructionsThis is the second part of your semester long assignment. This is all about trying to build functions that will perform console printing.When finished, take your my_os folder and ZIP it up (or .RAR or .TAR or .7Z, whatever you want! I just want you to submit ONE archive file).You are going to generate a folder called include in the root of your my_os folder. Generate a file called console.h in that folder.You are then going to create a folder called shell. Inside shell you are going to generate a file called console.c.Since console.c is going to need to be compiled, make sure you adjust your Makefile so you compile the correct files.console.h should be used to declare the function headers you will use in console.c and also declare any constant or static variables you will need (for example you will more than likely want to put the VGA_HEIGHT and VGA_WIDTH variables in there).console.c will then contain three functions whose function header are defined asvoid print_character(char)void print_string(char*)void print_line(char*)The first function will take a single character as a parameter and print it to the screen at the current position of your terminal cursor.The second function will take a string parameter given to it and print it to the screen starting at current position of your terminal cursor.The third function will do the same as the second function, but will add a new line at the end to move the terminal print position to the beginning of the next line.The first use of the function will print to the screen in the upper left corner starting at the first address in the video buffer.To test this is working, alter your main function in kernel.c to make multiple calls to these functions such thatchar* str1 = "HELLO";char* str2 = "WORLD";char* str3 = "TODAY";print_string(str1);print_line(str2);print_string(str3);Would make the output at your terminal readHELLOWORLDTODAYNotice that you will have to keep a variable that holds where the current terminal position is! Your header file is a good file for this information.A complete assignment is one that meets the following qualifications:1) shell folder2) console.c with function implementation in shell folder3) console.h inside an include folder with function header and static / constant variables you will need4) An adjusted kernel.c that includes the appropriate functions and is altered to show that your functions work5) An adjusted Makefile to compile the correct codePlease upload your ZIP here. In which country it makes most sense to drive battery electric vehicle (BEV) compared to internal combustion engine vehicles in the aspect of Well-to-Tank CO2? a) BEV is zero-emission vehicle so it does not matter. b) South Korea. c) Norway. d) United States. The failure to obtain a license required by a statute for revenue-raising purposes: Select one: O a affects the legality of the unlicensed person's agreements and it will be considered vold. b. results in generally unenforceable contracts. O C does not affect the legality of unlicensed persons' agreements O d. automatically declares the contract void for the protection of the public in hash table, we usually use a simple mod function to calculate the location of the item in the table. what is the name of this function? What the evidence that support the relationship of eukaryotic cell organelles to bacteria Choose the false statement about the coverage under the Business owners Policy.1. Products and completed operations coverage under the Commercial General Liability Coverage Forms will cover damage to the insured's products2. Products and completed operations do not cover damage to the insured's product. It covers liability arising from its use. PLEASE HELP ME WITH THIS ONE QUESTION You have 1 kg of water and you want to use that to melt 0. 1 kg of ice. What is the minimum temperature necessary in the water, to just barely melt all of the ice? (Lf = 3. 33 x 105 J/kg, cwater 4186 J/kgC) ingratiation is positively related to performance ratings. true false true or false: in a two-sided test for mean, we do not reject if the parameter is included in the confidence interval. given a 4096b sector, 3,000rpm, 4 ms average seek time, 700mb/s transfer rate, and 0.2ms controller overhead, find the average read time in ms for one sector. round result to 1 decimal place. (2,1) and (3,1. 5) (2,1) and (5,2) (6,2) and (8,2) (6,2) and (10. 1. 75) a series rlc circuit consists of a 60 resistor, a 3.1 mh inductor, and a 510 nf capacitor. it is connected to an oscillator with a peak voltage of 5.5 v .Part ADetermine the impedance at frequency 3000 Hz.Part BDetermine the peak current at frequency 3000 Hz.Part CDetermine phase angle at frequency 3000 Hz. a triangular display pedestal is to be made of corrugated paper. using illustration 7, what size sheet needs to be designated on the drawing? for the first thirty years of its existence, which snack did not have a creamy filling? solving for rates what annual rate of return is earned on a $2,100 investment when it grows to $4,700 in nineteen years? Gaseous butane (CH(CH)CH) will react with gaseous oxygen (O) to produce gaseous carbon dioxide (CO) and gaseous water (HO). Suppose 48. g of butane is mixed with 54.6 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Be sure your answer has the correct number of significant digits. A student sets an object attached to a spring into oscillatory motion and uses a position sensor to record the displacement of the object from equilibrium as a function of time. A portion of the recorded data is shown in the figure above.The speed of the object at time t=0.65 s is most nearly equal to which of the following? The standard molar heat of formation of water is -285.8 kJ/mol. Calculate the change in energy required in making 50.0 mL of water from its elements under standard conditions. Population dynamics of local populations in a metapopulation must not to be synchronizedTrueFalse