Which of these changes is an example of a physical change?

A. zinc reacts with oxygen to form zinc oxide

B. vinegar turns milk into cheese

C. a banana rots

D. a piece of fruit is bitten in half​

O The NaCl will fail to dissociate. is NOT true. When solid NaCl is stirred into water, it will dissociate, meaning it will separate into individual sodium and chloride ions, which will make the solution conduct electricity and taste salty.

When a solid ionic compound dissolves, there is a process known as dissociation that separates the ions. The ability to formulate dissociation equations is crucial. Simply reverse the crisscross technique you learnt to use when writing ionic compound chemical formulas.

Dissociation is the process by which chemical molecules (or ionic compounds like salts, or complexes) disintegrate into simpler components like atoms, ions, or radicals. This process is typically reversible, as it is for CO2 and H2O at high temperatures.

Association and recombination are opposed by dissociation. Dissociation, for instance, causes metal pipes used in water treatment to corrode more quickly and cause more pitting in the anode area of concentration cells. In the presence of hydrogen sulfide and water, the dissociation of the hydrogen-sulfide molecule is also necessary for the corrosion of iron.

To know more about dissociation visit:

https://brainly.com/question/29571608

#SPJ4

Succinic acid occurs in fungi and lichens. Its empirical formula is C2H3O2 and molar mass is 118.1 g/mol. Its molecular formula is C4H6O4/ (CH2)2(CO2H)2.

Succinic acid is a dicarboxylic acid with the chemical formula as (CH2)2(CO2H)2. Succinic acid is naturally occurring four-carbon dicarboxylic acid with the molecular formula of C4H6O4 which is produced by liquefied petroleum gas.

The benefit of using succinic acid over traditional salicylic acid or benzoyl peroxide is that succinic acid is found to be gentle and non-drying, making it a good option for sensitive / irritated skin. Succinic acid helps to control and balance excess sebum production to reduce shine and excess oil which is great for those with oily / acne-prone skin.

To know more about succinic acid, refer

https://brainly.com/question/11629463

#SPJ1

0.233 liters of  4.25 M sucrose contain 109 g of solute  which is used In biochemistry laboratories, in high speed centrifuges to separate the parts of a biological cell.

Moles of sucorse = [tex]\frac{mass}{molar mass}[/tex]

= [tex]\frac{245}{342.3}[/tex]

= 0.71575 mol

volume of solution = [tex]\frac{moles}{concentration}[/tex]

= [tex]\frac{0.71575}{3.07}[/tex]

= 0.233 L

In chemistry, a mole, usually spelled mol, is a common scientific unit for calculating huge concentrations of minute particles like atoms. The International System of Units uses the mole (symbol: mol) as the unit of material quantity (SI). The amount of substance is a metric for determining how many elementary entities of a specific substance there are in a given object or sample. The mole concept permeates all of chemistry. Understanding the mole is crucial for the study of chemistry because the mole is the subject of the majority of quantitative chemical calculations. an understanding of the mole's relationship to mass and entity count.

A substance's molarity (M) is the volume of solution in which it is present. The moles of a solute are referred to as molarity.

For such more questions on  Sucrose:

brainly.com/question/29186350

#SPJ4

0.233 liters of 4.25 M sucrose contain 109 g of solute which is calculated in the below.

The number of moles can be calculated by taking the ratio of mass and molar mass.

Moles of sucrose = 109 g /342.3 g/mol

= 0.71575 mol

Molarity of a substance can be expressed as the ratio of its number of moles to the volume of solution in L.

Molarity = number of moles /Volume of solution

4.25 M= 0.71575 moles/ Volume of solution

Volume of solution= 0.233 L

The mole is crucial for the study of chemistry because the mole is the subject of the majority of quantitative chemical calculations. An understanding of the mole's relationship to mass and entity count.

To learn more about molarity check the link below:

https://brainly.com/question/14469428

#SPJ4

a) Ni₂⁺ is a metal ion and is a co-factor

b) Inorganic ions are co-factors

c,d,e)Ascorbic acid, NADP, and CoA are all organic molecules. So, they are co-enzymes.

f) A protease is a holoenzyme or the main enzyme. It is neither

co-factor nor co-enzyme.

Cofactors are small, soluble organic or inorganic molecules that interact with enzymes to improve or enable their activity. Metals are typical inorganic cofactors, including but not restricted to copper, magnesium, manganese, zinc, molybdenum, and cobalt.

Coenzymes are organic molecules that function along with enzymes. Coenzymes bind with the enzymes.

Ni₂⁺ is a metal ion and is a cofactor

Inorganic ions are cofactors

Ascorbic acid, NADP, and CoA are all organic molecules. So, they are coenzymes.

A protease is a holoenzyme or the main enzyme. It is neither cofactor nor coenzyme.

To know more about cofactors visit:

https://brainly.com/question/29940952

#SPJ4

Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, 148.5J is the amount of heat that was  required to heat the water.

Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances. Internal energy is the sum of all kinds of energy that the particles of a matter can possess, for example translational energy. Rotational energy.

Mathematically,

Enthalpy=mass of unknown water× specific heat capacity of water× Change in temperature

mass of water= 0.5 kg

specific heat capacity of water=4.184J/Kg°C

Change in temperature=final temperature - initial temperature

=75°C -4°C

= 71°C

enthalpy=?

Substituting all the given values in the above equation, we get

enthalpy= 0.5× 4.184× 71

              =148.5J

Therefore, 148.5J is the amount of heat that was  required to heat the water.

To know more about enthalpy, here:

https://brainly.com/question/24170335

#SPJ1

Answer:

predation

Explanation:

The types of interaction in which one organism will be consumed are predation and competition.

PREDATION: When one animal hunts down another animal for food, it is called predation. The animal that is hunting is called the predator and the one being hunted is called the prey. Certain patterns of predation give us a particular food chain. For example, an insect is eaten by a frog, a frog is eaten by a snake, and a snake is then eaten by a vulture.

COMPETITION: In this type of interaction, a group of animals or individual animals compete for food or other resources. Depending on the resource being competed for, it is of various types.

Learn more about animals at:

https://brainly.com/question/1462278

the process of creating nitrile from amide. In this reaction, thionyl chloride and amide combine, producing nitrile as well as SO2 and HCl gas. The elimination of byproducts (such as SO2 and HCl) is crucial to the success of this reaction.

the mechanism or technique by which a result is generated or a goal is achieved. machinery or mechanical devices in general. the arrangement or organization of components of a machine, comparable equipment, or something similar. any mechanical device or component: a clock's mechanism

a method or technique that is employed to bring about a certain outcome. NIST SP 800-160v1r1 is one of the sources. the essential procedures entailed in or accountable for an activity,

To know more about mechanism visit:

https://brainly.com/question/28111553

#SPJ4

Calcium Carbonate (formula weight 100.1) dissolves in 1800 ml at a rate of 0.0095 g, and its ksp is 2.8 x [tex]10^{-9}[/tex]

The equilibrium constant for a saturated solution of an ionic chemical at a certain temperature is known as the solubility product constant (Ksp). We need to know the compound's molar solubility in order to determine the Ksp. From the stated solubility, which is 0.0095 g in 1800 ml, it is possible to determine the molar solubility of caco3. We must convert the solubility of calcium carbonate into moles in order to compute molar solubility. 0.00094 moles are equivalent to 0.0095 g of caco3. We may now use the Ksp equation, which is Ksp = [Ca2+][CO32-]. When we replace Ksp with the molar solubility ofcalcium carbonate, we get 2.8 x  [tex]10^{-9}[/tex]as Ksp = 0.00094 x 0.00094.

To  know more about  Ksp refer to the link

brainly.com/question/27132799

#SPJ4

Enthalpy, which is equal to the sum of a system's internal energy plus the product of volume and pressure, measures the overall amount of heat contained in a system.

A thermodynamic system's energy is measured in terms of enthalpy. Enthalpy, which is equal to the sum of a system's internal energy plus the product of volume and pressure, measures how much heat is present in a system overall.

The change in enthalpy of a chemical reaction that takes place under constant pressure is known as the Heat of Reaction, also known as the Enthalpy of Reaction. It is a thermodynamic unit of measurement that may be used to figure out how much energy per mole is created or released during a reaction.

"H" stands for "Hproducts" and "Hreactants."

A little under 4 kJ of energy are thus released during the production of salt.

To learn more about enthalpy refer to:

https://brainly.com/question/14047927

#SPJ4

After reviewing the periodic chart, we find Dubnium, Tantalum, Niobium, and Magnesium in accordance with the supplied statement.

Atomic composition. A tiny nucleus and electrons in orbit make up an atom. Protons are found in the nucleus with a positive charge that is equivalent to the atom negative charge. Neutrons, which have essentially same mass and yet no charge, may also be present in the nucleus.

But when it refers to the name atom, we must travel back to 400 B.C. ancient Greece. This Greek word atomos, it meaning "uncuttable," was proposed by Democritus, a renowned philosopher. Consequently, he claimed, all matter may be broken down into unique, small particles known as atomos.

To know more about Atom visit :

https://brainly.com/question/13973654

#SPJ4

The Complete Question :

Consult the periodic table and rank these atoms, from most to least, by their mass.

Tantalum

Niobium

Dubnium

Magnesium

The differentiation of cells is responsible for the development of specialized tissue in living organisms.

The process by which dividing cells are able to change their functional or phenotypical type is called cell differentiation. All cells have presumably been derived from the stem cells and have obtained their functions as they mature.

Cellular composition is often described as a hierarchical scheme where the stem cells are at the top of the hierarchy. According to mathematical models of cell differentiation, the proliferation, death, and differentiation of an appropriately distinguished cell population are considered.

For example, the cells that are present in a stem cell population are able to differentiate into multiple types of cells. They are able to maintain their number by self-renewal.

A progenitor cell population is derived from the stem cells and it differentiates into a restricted cell lineage. Here, a mature cell population is derived from the progenitor cells and they perform some functions and then die a natural death.

Learn more about cell differentiation here: brainly.com/question/16355203

#SPJ1

C) The compounds underneath is competent of hydrogen holding between its particles CH₃NHCH₂CH₃.

Organic compounds are a substance that contains covalently- fortified carbon and hydrogen and regularly with other components. Natural compounds illustrations are benzoic Corrosive, fragrant compounds, benzoic aldehyde, propanoic corrosive, butanoic corrosive, malonic corrosive, amines, heterocyclic compounds, VOC, benzoic corrosive, and diethyl malonate.

Organic compounds are those gotten specifically or by implication from plants and creatures. The compounds gotten from minerals are known as inorganic compounds.

To learn more about Organic compounds here:

https://brainly.com/question/5994723

#SPJ4

A. acetid acid is the most soluble in water among the pentanol, butanoic acid, pentanal

Acetic acid is the most water-soluble among the given options. Acetic acid is a carboxylic acid and is highly polar, meaning that it has a high affinity for water. The presence of the carboxyl group (-COOH) gives acetic acid the ability to form hydrogen bonds with water molecules. Pentanol, butanoic acid and pentanal are less polar than acetic acid, they have lower solubility in water. Among them, pentanol has the highest solubility, but still it is less polar than acetic acid, followed by butanoic acid, and pentanal is the least water-soluble among the options.

Learn more about Acetic acid here:

https://brainly.com/question/12924347

#SPJ4

Answer:A mole is a way of counting things, in the case of chemistry those things are molecules.

But the number of things is a chemical reaction are not necessarily preserved: some reactions create more molecules (electrolysis of water (H2O), for example, starts with two molecules of water but delivers one molecule of oxygen gas (O2) and two molecules of hydrogen gas (H2)).

So moles are not conserved if the structure of the molecules changes because of the reaction. The point of writing equations is to match conservation of matter (atoms don't disappear) to the structures of the molecules involved in the reaction. Sometimes reactions just rearrange the atoms and give the same number of moles of product, sometimes they create more molecules, and sometimes they create fewer molecules.

In an ideal gas, there is a neat relationship between the number of moles and the volume or pressure (at constant pressure the volume is proportional to the number of moles of gas; at constant volume, the pressure is proportional to the number of moles of gas). So your question asks you to compare the number of moles resulting from the reaction to the number going into the reaction. since they are the same, the pressure won't change.

Explanation:   I know it's a lot to read I'm sorry but I want you to get an A on it so there you go. Hope this helps

The radius of atom X is greater than the radius of atom Y, then it is also likely that X has a greater metallic character than Y does option - c is correct answer.

As we move from left to right, the amount of metallic character decreases while the amount of nonmetallic character increases. This is brought on by an increase in the enthalpies of ionisation and electron gain brought on by an increase in the effective nuclear charge.

Because radius decreases over the course of a period, if X has a larger radius than Y, X is on the left side of Y in the periodic table.

The assertion A is untrue because electron affinities increase from left to right.

Statement B is false because the effective nuclear charge increases from left to right.

The statement C is true because the metallic character gets thinner from left to right.

D is untrue because ionization energy increases from left to right.

Since X is more metallic than Y, the assertion E is untrue.

The correct response is therefore statement C.

To know more about metallic character visit:

https://brainly.com/question/16940676

#SPJ4

Answer:

Hydrogen bonding

Explanation:

Hydrogen bonding is the strongest intermolecular force in water, giving water many of its characteristics and acting to pull water molecules closer to each other.

I hope this helps!

After solving the equation the correct answer is a) -822 kJ/mol.

An equation is a mathematical statement that expresses two expressions as being equal. It contains an equal sign, and typically involves variables, numbers, and/or operations such as addition, subtraction, multiplication, and division. Equations can be used to solve for unknown values and to describe relationships between things. They are a powerful tool in mathematics, science, engineering, economics, and other fields.

The given equation is Fe2O3 + 3H2 → 2Fe + 3H2O. Since the enthalpy of formation of water, ΔHf^0 (H2O) is known, the enthalpy of formation of iron (III) oxide can be calculated as follows:
ΔHf^0 (Fe2O3) = -6.09 kJ - 3(-241.84 kJ/mol)
ΔHf^0 (Fe2O3) = -822 kJ/mol
Therefore, the correct answer is a) -822 kJ/mol.

To learn more about equation
https://brainly.com/question/28818351
#SPJ1

The heat that is produced when sodium and chlorine ions establish an ionic bond is known as the heat of formation.

Ionic bonding, a sort of chemical bonding that involves the electrostatic attraction between two atoms or ions with sharply differing charges, is the main interaction that takes place in ionic compounds.

The electrical attraction between two ions with opposing charges in a chemical molecule creates an ionic bond, also known as an electrovalent bond.

One atom's valence (outermost) electrons are permanently transferred to another atom to create this type of bond. Ionic bonds, which occur when two negatively charged ions join forces with positively charged ones, are formed when one atom transfers electrons to the other. Ionic bonds can be seen in the chemical compound sodium chloride.

To learn more about ionic bond, refer to:

brainly.com/question/13526463

#SPJ4

Electron in biological systems, carrier molecules help temporarily transport the stored energy of electrons and ease the relay of electrons from one carrier molecule to another.

Redox reactions refer to the entire process of moving electrons from one molecule to another. Because one carrier molecule acquires electrons and becomes reduced (red-), earning the name "redox," the other carrier molecule loses electrons and becomes oxidized (-ox). Occasionally, the phrase "oxidation-reduction reaction" is used in its place. When a molecule is oxidized, it either needs electrons or has already given them up. The addition or removal of oxygen (O) or hydrogen (H) is a sign that a molecule has undergone oxidation. Reduced signifies that the molecule has acquired electrons and is prepared to surrender them. An indication is the loss or gain of oxygens (O) or hydrogens (H).Small organic molecules known as electron carriers, also referred to as electron shuttles, are utilized to transport electrons during metabolic reactions. They easily cycle between reduced and oxidized states.

To know more about respiration on

https://brainly.com/question/12081196

The complete follows as

What electron carrier is used in the redox reactions in cellular respiration?

The tautomerization of 3-pentanone gives two possible enols, one of which is shown.  the second enol formed in this reaction is shown in the first image.

Tautomerization is a process in which a molecule can exist in two or more different forms that are constitutional isomers (also called tautomers) of each other. These forms differ by the position of a proton (H+ ion) and have different chemical properties. Tautomerization is a type of isomerization, which is a chemical reaction in which a molecule is converted into one of its isomers.An enol is a type of organic compound that contains a carbon-carbon double bond and a hydroxyl group (-OH) on the same carbon atom, known as the alpha carbon. Enols are structural isomers of the corresponding ketones and aldehydes and can exist in equilibrium with them through the process of tautomerization.

Learn more about aldehydes here:

https://brainly.com/question/29756072

#SPJ4

The answer is B. It's the only one in which the original mass changes to a different mass.

1. Percent yield = (Actual yield/Theoretical yield) x 100

Actual yield = 1.50 g Cu

Theoretical yield = (0.5 f Al) x (1 mol Al/27.0 g Al) x (1 mol Cu/1 mol Al) x (63.5 g Cu/1 mol Cu) = 1.35 g Cu

Percent yield = (1.50 g Cu/1.35 g Cu) x 100 = 111.1%

2. Balanced chemical equation: 2 Al + 3 CuCl2 → 2 AlCl3 + 3 Cu

Answer: 2Al + 3CuCl2 → 2AlCl3 + 3Cu, Percent yield is 84.9%

Explanation: Find moles of aluminum using molar mass then x by coefficient ratio of cu/al. Then divide 1.5 by that value and x 100.

A container of hydrogen sulphide gas has a pressure of 35,650Pa. This pressure in torr is 267.4 torr.

Given the  pressure of hydrogen sulfide gas is (P) = 35,650Pa

We know that 1 atm = 101,325 Pa = 760torr

Then let 35,650Pa is equal to y torr.

y x 101,325 = 760 x  35,650

y = 267.4torr

Pressure is defined as the force perpendicular to an object's surface applied per unit area over which that force is dispersed. The force of one newton applied perpendicularly to a surface area of one square metre constitutes the fundamental unit of pressure, the pascal.

To learn more about hydrogen sulfide click here https://brainly.com/question/11837837

#SPJ4

Landslides are an example of erosion and it is denoted as option B.

This is referred to as the geological process in which earthen materials are worn away and transported by natural forces such as wind, water etc.

Landslides on the other hand is also associated with mass wasting and it is referred to as the movement of a mass of rock, debris, or earth down a slope and it is as a result of factors or forces such as water etc which is therefore the reason why erosion was chosen as the most appropriate choice.

Read more about Landslides here https://brainly.com/question/22692497

#SPJ1

Cu(s) + 2 AgNO3(aq) —> Cu(NO3)2(aq) + 2 Ag(s) According to the balanced chemical equation, 7.09 x 10²³g of silver will be produced from combining 100 g of copper with 200 g of silver nitrate.

The balance chemical equation is defined as the total mass of reactant is exactly equal to the total mass of product.

Molar mass of Cu  is 63.57 g/mol.

Mole of Cu in 100 g

= (100 g/63.57 g/mol)

= 1.573 mol

Molar mass of AgNO3 is 169.91 g/mol.

Mole of AgNO3 in 200 g

= (200 g/169.91 g/mol)

= 1.177 mol.

From the balanced, the mole ratio of Cu to AgNO3 is 1:2.

So, for 1.573 mol of Cu, mole of AgNO3 required for reaction

= (2/1) x 1.573

= 3.146 mol.

Therefore, Cu is the excess reactant.

From the balanced equation again, the mole ratio of AgNO3 to Ag is 2:2 or simply 1:1.

Then, for 1.177 mol of AgNO3, mole of Ag produced is (1/1) x 1.177 = 1.177 mol.

By Avogadro’s Number, 1 mole of any substance contains 6.022 x 10²³ atoms.

Hence, for 1.177 mole of Ag, the number of Ag atoms produced

= (1.177 mole x 6.022 x 10²³ atoms/mole)

= 7.09 x 10²³.

Thus, According to the balanced chemical equation, 7.09 x 10²³g of silver will be produced from combining 100 g of copper with 200 g of silver nitrate.

To learn more about the balance chemical equation, follow the link;

https://brainly.com/question/28294176

#SPJ1

The structures of the following three isomeric acid chlorides with chemical formula C₆H₉ClO are attached below.

Isomers are substances that contain precisely the same number of atoms, i.e., they have the exact same empirical formula, but they differ from one another by the arrangement of the atoms. Chain isomers, positional isomers, and functional group isomers are the three types of structural isomers.

Isomer types can be divided into two categories. Constitutional isomers are molecules with different connectivity, which are comparable to simple bracelets with a different arrangement of the red and green beads. Stereoisomers make up the second kind. The connectivity in stereoisomers is the same, but the components are arranged differently in space.

To know more about isomers visit:

https://brainly.com/question/28304980

#SPJ4

In the Dieckmann reaction, the diester undergoes a cyclization reaction to form a beta-keto ester. Two beta-keto esters are formed, one from the carboxyl group at the end of the chain, and one from the carboxyl group at the middle of the chain.

Cyclization is started by the production of a putative cation, typically from a sp3-hybridized carbon, either by electrophilic addition to a double bond or by ionization.

The most frequent cyclization processes take place when an electrophile and a nucleophile interact. Consequently, the following are the most common reaction types: the nucleophilic change in a carbon atom that is saturated. addition by nucleophiles to an unsaturated carbon. Atomic addition-removal nucleophilic.

To know more about Cyclization visit: https://brainly.com/question/29422955

#SPJ4

Ethers are formed via the SN2 method. Since I- is a superior leaving froup than Cl-, the reaction rate will rise when switching from CH3Cl to CH3I. The rate is going to drop. Secondary halides include (CH3)2CHCl.

The broad definition is that the term "rate of a reaction" refers to the pace at which a reaction occurs. For instance, because iron rusts quickly, wood combustion has a rapid response rate.

The following five broad characteristics can have an impact on a reaction's pace. the mixture of the reactants. The rate increases as concentration increases. Temperature, Reactants' current physical state. The existence (and intensity/physical

To know more about rate of reaction visit:

https://brainly.com/question/13693578

#SPJ4

The three main causes of erosion, or the removal of soil, rock, and other materials, are wind, water, and ice.

Compared to plate tectonics, landforms are changed much more quickly by earthquakes, weathering, and people, and these changes are frequently visible.

Sand dunes, Loess Deposits, Yardangs, Ventifact, Deflation Hollow or Blowout, and Desert Pavement are among the geological features.

Glaciers carved a collection of strange valleys with flat bottoms and steep walls. Hanging valleys, fjords, and U-shaped valleys are a few examples of the different sorts of valleys that glaciers can destroy.

Alpine glaciers have their origins in the mountains, in a number of our National Parks. When they form in tiny basins with sloping sides, they are referred to as cirque glaciers (cirques).

U-shaped valleys have been found to be produced by glacial erosion. A massive glacier's journey through the landscape leaves imposing traces. Walls of rock blocks are  torn apart by its abrasive force.

To learn more about landforms refer to:

https://brainly.com/question/20932760

#SPJ1

Answer: 4240.08

Explanation: 29 grams of NaOH is equivalent to .725 moles of NaOH since the molar mass of NaOH is 39.997. We do the calculation 29/39.997 to find the number of moles.

The unit M or molarity represents moles per liter. .171 M NaOH means there are .171 moles of NaOH in one liter of the solution. To find the volume needed, we can divided the number of moles we have which is .725 by .171 to find liters. This gives us 4.240 L or 4240.08 ml.

If you are confused by the calculation, you can look at how the units change: M=Mol/L .725 is in moles. We do mol/(mol/L) which is the same as mol*(L/mol) so the mol cancels and we are left with a unit in liters which we can easily convert to milliliters.