Which Of The Following Would Be Expected To Behave As A Nucleophile? SH NH, NH4 Но

The following statements correctly describe a net ionic equation:

a. The positive and negative ions dissociate from each other.

c. The attraction between the H2O molecules and the ions is stronger than the attraction of the ions for each other.

define ionic equation ?

An ionic equation is a chemical equation that shows the species in a chemical reaction as ions, rather than as neutral molecules. It is a balanced equation that only includes species that undergo a chemical change during the reaction, and it ignores the species that are present in the reaction but remain unchanged. Ionic equations are used to describe reactions that occur in aqueous solution, where ions are dissolved in water. The ionic equation shows the formation of positive and negative ions from neutral species, the transfer of electrons between ions, and the precipitation or dissolution of ions. It provides a more detailed representation of the reaction than a molecular equation, which only shows the reactants and products as neutral molecules.

To learn more about ionic equation follow the given link: https://brainly.com/question/27892358

#SPJ4

Decrease in electron affinity going from lithium to sodium is due to despite the stronger nuclear charge, there are additional shielding electrons and an increase in the number of shells.

Electron affinity is termed as the change in energy (in kJ/mole) of the neutral atom (in the gaseous phase) when an electron will be added to the atom to form a negative ion.

Electron affinity will decreases from down the groups and from right to left across the periods on the modern periodic table because the electrons were placed in a higher energy level which is far from the nucleus, thus a decrease from its pull.

To know more about electron affinity here

https://brainly.com/question/11302894

#SPJ4

The subshell to which an electron would have to be added to make a -1 anion.Hg 4f 5d H 1s 1s X 5s 4p Ne 3s 2p K 4s 3p.

The charge of an electron, which is commonly thought to be negative, is equal to and the opposite of the charge of a proton, which is typically thought to be positive. Because there are more electrons than protons in an ion's total charge, the net charge is not zero. An anion is a negatively charged ion that has more electrons than protons compared to a positively charged ion called a cation. Because they have opposing electric charges, cations and anions are drawn to one another by electrostatic force, which makes it easy to create ionic compounds. Atomic ions are distinct from molecular ions, which are composed of two or more atoms and are also known as multi-atom ions.

To know more about anion please refer:

https://brainly.com/question/15578817

#SPJ4

The molar concentration of the aqueous KNO3 solution is 0.304 M.

To find the molar concentration of the aqueous KNO3 solution, we have to find the no. of moles of KNO3 in the given solution.

The number of moles of KNO3 can be calculated by using the formula:

moles = mass / molar mass

where the molar mass of KNO3 = 101.1 g/mol. So,

moles = 60.1 g / 101.1 g/mol = 0.595 mol

Now, we can use the no. of moles of KNO3 and the volume of the solution to calculate the molar concentration of the solution.

The molar concentration, or molarity, is defined as the number of moles of solute per liter of solution. We can use the formula:

molarity = moles/liters

So,

molarity = 0.595 mol / 1.96 L = 0.304 M

The molar concentration of the aqueous KNO3 solution is 0.304 M.

To learn more about molar concentration:

https://brainly.com/question/26255204

#SPJ4

Answer:beek

Explanation:

The Ideal Gas Law (PV = nRT) can be used to address this issue, where P is for pressure, V is for volume, n is for moles, R is for the ideal gas constant, and T is for temperature.

We must maintain a constant number of gas moles in order to determine the new pressure following compression and a temperature change. The equation (P1V1)/T1 = (P2V2)/T2 can be used to show the relationship between the initial and final pressure and volume. Calculate P2, the new pressure, by plugging in the provided numbers. Keep in mind to change the temperature and volume units to Kelvin.

P2 × V2 = n × R × T2

P2 = (n × R × T2) / V2 = (n × R × 352) / 28.4

Learn more about Ideal Gas Law:

brainly.com/question/28257995

#SPJ4

Answer:Transcript A liquid’s vapor pressure is directly related to the intermolecular forces present between its molecules. The stronger these forces, the lower the rate of evaporation and the lower the vapor pressure.

Explanation:

As vapors are produced more from a liquid there will be more cooling effect as vapors are inversely proportional to the boiling point that means lesser the boiling point better will be the evaporation.

Intermolecular forces are the forces present between the molecules and liquid’s vapor pressure is directly related to the intermolecular forces as well . The stronger these forces, the lower the rate of evaporation and the lower the vapor pressure.

Therefore, the relationship between the vapor pressure of a liquid and how well it cools by evaporation is having direct proportionality.

Learn more about evaporation, here:

https://brainly.com/question/5019199?referrer=searchResults

#SPJ2

[tex]6.3*10^{11}[/tex] electrons would have to be removed from a coin to leave it with charge of [tex]+1*10^{-7}[/tex] C

The molecules are typically ionized by either removing an electron or by adding a proton once they are in the gas phase and enter the mass spectrometer. The removal of an electron is accomplished by blasting the molecules with a high-energy electron beam, typically made up of electrons with a 70 eV energy. Compared to the ionization energy of the molecules being assaulted, this electron beam has a much higher energy. The method is referred to as electron ionization (EI). Since the resultant ion has one unpaired electron, it is a radical ion.

According to the question,

∣q∣ = [tex]1*10^{-7}[/tex] C, we know charge of an electron is [tex]1.6*10^{-19}[/tex] C

∴ number of electrons (n) = [tex]\frac{q}{e}[/tex] = [tex]\frac{1*10^{-7}}{1.6*10^{-19}}[/tex] = [tex]6.3*10^{11}[/tex] (Ans)

To know more about electrons

brainly.com/question/6283462

#SPJ4

The complete question is:

How many electrons would have to be removed from a coin to leave it with a charge of [tex]+1*10^{-7}[/tex] C ?

The mass percent composition of 2.45 g of calcium in 3.43 g of calcium oxide is 28.54%.

To determine the mass percent composition of calcium in calcium oxide, we can calculate the mass of calcium in the calcium oxide sample and express it as a percentage of the total mass of the sample.

First, let's find the mass of calcium that reacted:

mass of calcium = 3.43 g - mass of oxygen = 3.43 g - (2.45 g - mass of calcium) = 0.98 g

Next, let's find the percent of calcium in the calcium oxide:

mass percent of calcium = (mass of calcium / mass of calcium oxide) x 100%

mass percent of calcium = (0.98 g / 3.43 g) x 100%

mass percent of calcium = 28.54%

So the mass percent composition of calcium in calcium oxide is 28.54%.

Learn more about mass percent composition here: https://brainly.com/question/20393858

#SPJ4

Answer: 40 mL

Explanation:

(25/1000) * 120 (2) = 0.0060 Mol of OH- so it needs .0060 mol of H+

.0060 mol/(.150 mol/liter) = .040 Liters

.040 * 100 = 40 mL

The volume of 0.150 molar HCl is required to neutralize 25.0ml of 0.120 Ba(OB)₂ is 0.04 M.

The balanced chemical equation is as :

2 HCl + Ba(OH)₂ → BaCl₂ + 2 H₂O

The molarity of the Ba(OH)₂  = 0.120 M

The volume of Ba(OH)₂ = 25 mL

The moles of the Ba(OH)₂  = 0.120 × 0.025

                                             = 0.003 mol

The 1 mole of the Ba(OH)₂ reacts with the 2 mole of the HCl

The moles of the HCl = 2 × 0.003

                                   = 0.006 mol

The volume of the HCl = moles / molarity

The volume of the HCl = 0.006 / 0.150

                                      = 0.04 M

To learn more about volume here

https://brainly.com/question/14299903

#SPJ4

Hexane (C6H14) or calcium chloride (CaCl2) are more soluble in carbon tetrachloride, CCl4. Therefore, option A is correct.

The maximum amount of a substance that will dissolve in a given amount of solvent at a given temperature is defined as solubility. Solubility is a property of a specific solute-solvent combination, and the solubilities of different substances vary greatly.

Because hexane and carbon tetrachloride have similar attractive intermolecular forces, their molecules can mix readily, calcium chloride and hexane dissolves in carbon tetrachloride.

Thus, Hexane (C6H14) or calcium chloride (CaCl2) are more soluble in carbon tetrachloride, CCl4 because it can form London forces, option A is correct.

To learn more about the solubility, follow the link;

https://brainly.com/question/28170449

#SPJ1

To determine the percentage of ligands in a coordination compound, you calculate the ratio of the number of ligands to the total number of atoms in the complex and convert that to a percentage.

Ligands are atoms or molecules that bond to a central metal ion in a coordination compound to form a coordination complex.

To determine the percentage of ligands in a coordination compound, you need to first calculate the ratio of the number of ligands to the total number of atoms in the complex.

To do this, you simply count the number of ligands in the compound and divide that number by the total number of atoms in the complex. The resulting ratio is then multiplied by 100 to convert it to a percentage.

For example, if a coordination compound has 4 ligands and 6 total atoms, the percentage of ligands would be calculated as:

(4 ligands / 6 total atoms) x 100 = 67% ligands

So in this case, 67% of the atoms in the compound are ligands.

To know more about ligands here:

https://brainly.com/question/2980623#

#SPJ11

A polypeptide with the net positive charge at the physiologic pH of 7.4 most likely contains the amino acids with R groups of the type id Basic R type.

The Basic amino acids possess the net positive charge at the physiological pH of 7.4. The Basic amino acids have the extra amino group in the side of the chain that can release the H⁺ ions into the solution results in the formation of ion of NH₃⁺

The acidic amino acids have the extra amino group in the side of the chain that can release the H⁺ ions into the solution resulting in the formation of COO⁻ ion.

To learn more about amino acids here

https://brainly.com/question/30351953

#SPJ4

The intensive and extensive properties are classified are mentioned below.

What is intensive property?

Pressure, density, temperature, viscosity, surface tension, refractive index, electromagnetic field, chemical potential, and specific surface tension are examples of intense qualities that are independent of the quantity of substance (or substances) present in the system.

What is extensive property?

A physical quantity's value is inversely correlated with the size of the system it describes or the amount of matter present. For instance, a sample's mass, which depends on the substance's amount, is a significant quantity.

Large-scale properties include volume and energy. Intensive qualities are unrelated to substance concentration. Intensive features include temperature, electrical conductivity, and boiling point.

Therefore, intensive and extensive properties are classified are mentioned above.

Learn more about intensive property from the given link.

https://brainly.com/question/17651922

#SPJ4

Suppose you are performing a titration, at the beginning of the titration, you read the titrant volume as 2.20 ml. after running the titration and reaching the endpoint, you read the titrant volume as 22.13 ml. The volume, in ml, of titrant was required for the titration is,

Final burette reading - initial burette reading

22.13 - 2.20

19.93ml

therefore the total volume of titrant required for the titration is 19.93ml.

To read the burette, you must be positioned so that your eyes are level with the meniscus's (a curved liquid surface). A parallax error will occur if you read from either above or below the meniscus. Keep a dark piece of paper behind the buret so you can better read the meniscus there.

To know more about titration click here:

brainly.com/question/29590776

#SPJ4

Assuming ideal gas behavior, the molar mass of the gas can be calculated using the equation: molar mass = density * volume * molar mass of air.

For this calculation, the density is 1.21 g/L, the volume is 1 L, and the molar mass of air is 28.9 g/mol. This gives a molar mass of 30467922 g/mol for the gas.

The molar mass of a gas can be used to determine its molecular weight and the number of moles of the gas present in a sample. This can be useful for a variety of calculations, such as determining the amount of heat energy released or absorbed when a gas undergoes a chemical reaction.

Learn more about molar mass

https://brainly.com/question/21334167

#SPJ4

The frequency of the red wave with a wavelength of 6.5 × 10-⁷m is 4.62 × 10¹⁴ Hz.

Wavelength refers the length of a single cycle of a wave, as measured by the distance between one peak or trough of a wave and the next.

The wavelength is often designated in physics as λ, and corresponds to the velocity of the wave divided by its frequency.

According to this question, the speed of light is about 3.0 x 10⁸ m/s. Red light has a wavelength of about 6.5 × 10-⁷ m.

6.5 × 10-⁷ = 3 × 10⁸ ÷ f

f = 3 × 10⁸ ÷ 6.5 × 10-⁷

f = 4.62 × 10¹⁴ Hz

Learn more about frequency at: https://brainly.com/question/18651058

#SPJ1

The three characteristics of a scientific theory are : testable, the falsifiable predictions, theories are supported by the observation.

The scientific Theory is the model that can explains the facts about the nature on the basis of the observations, the experimentation and reasoning. The scientific theories have the characteristics as follows :

1) It is testable

2) The falsifiable predictions,

3) The theories are based on facts

4)  The theories are based on observation.

5) The theories are modify according to the new observation.

The scientific theory is the theory based on the evolution that holds all the present life descended.

To learn more about  scientific theory here

https://brainly.com/question/2375277

#SPJ4

Three single bonds and one lonely pair of electrons connect the central nitrogen atom in C4H11N to the three carbon atoms. As a result, the nitrogen atom is in the sp3 hybridization state.

The nitrogen atom has a trigonal pyramidal shape as a result. The positioning of the molecule's bond dipoles affects the molecular dipole moment. One lone pair of electrons and three single bonds between the core nitrogen atom and the three carbon atoms make up C4H11N. The nitrogen atom ends up in the sp3 hybridization state as a result. The molecule has a non-zero dipole moment with the positive end facing the bond pairs and the negative end facing the lone pair when it has a lone pair and three bond pairs in a trigonal pyramidal shape. The lone pair repels the bond pairs more than the bond pairs repel one another.

learn more about nitrogen atom here:

https://brainly.com/question/13825729

#SPJ4

The steps in the right order to determine whether or not a precipitate form when two solutions are mixed are given below:

There are three outcomes that can happen depending on a solute's solubility:

1) A solution is said to be diluted if the amount of solute in it is less than its solubility, or

2. maximum amount at which it can dissolve, and saturated if the solute content exactly equals its solubility.

Hence, the proper steps are given above,

Read more about precipitates here:

https://brainly.com/question/1783904

#SPJ1

place the steps required to determine whether or not a precipitate forms when two solutions are mixed in the correct order.

-consider possible cation-anion combinations

-note the ions present in the reactions

-use the solubility rules to determine whether or not either of the combinations gives an insoluble salt

According to the question denote an arbitary constant is xy - xy + 2x - 3y = 6 ,xy - 2x + 3y = 6 .

Arbitrary is a term used to describe something that is based on personal opinion, preference or whim, rather than any reason or system. It is usually used to describe decisions, rules or criteria that are subjective, rather than objective, and cannot be justified. For example, an arbitrary decision might be to select a winner for a competition based on their clothing rather than their skills. It can also refer to a number that is randomly selected, with no link to any existing system or pattern.

Subtract xy from both sides: -2x + 3y = 6 - xy

Divide both sides by -2: y = -(x/2) + (6 - xy)/2

Therefore, y = -(x/2) + (6 - xy)/2, where is an arbitrary constant.

To learn more about arbitary

https://brainly.com/question/14265635

#SPJ4

let's imagine you have 100 g of sucralose

C: 36.25 g  No of moles = 36.25/12 = 3.02

H : 4.82 g No of moles = 4.82/1 = 4.82

Cl: 26.75 g No of moles = 26.75/35.5 = 0.75

O: 32.19 g No of moles = 32.19/16 = 2.01

divide all the four mole numbers by the smallest one (0.75)

Empirical formula = C4H6ClO3

Let the molecular formula be (C4H6ClO3)n.

(4x12+6x1+35.5+3x16) x n = 397.63

                                          n = 3

Molecular formula = C12H18Cl3O9

the molecular formula I've searched online is C12H19Cl3O8 so I am also not very sure

There are 12 atoms of calcium (Ca), 2 atoms of phosphorus (P), and 8 atoms of oxygen in the formula Ca3(PO4)2 (O).

The elements calcium (Ca), phosphorous (P), and oxygen are combined to form the chemical calcium phosphate (O). Dicalcium phosphate, tricalcium phosphate, and octacalcium phosphate are only a few of its many types. Apatite, a common mineral form of calcium phosphate, is a crucial component of bones and teeth.

The number of atoms in Calcium Phosphate can be determined by multiplying the coefficient of each element with the number of atoms in the empirical formula, which gives the chemical formula Ca3(PO4)2. Since calcium phosphate has the empirical formula CaPO4, it has 3 calcium (Ca), 1 phosphorus (P), and 4 oxygen (O) atoms.

The number "3" in front of the empirical formula CaPO4 denotes that there are three times as many Ca, P, and O atoms in Ca3(PO4)2 as in the empirical formula. As a result, the following formula can be used to determine how many Ca, P, and O atoms are present in Ca3(PO4)2:

3 calcium (Ca) atoms plus 1 phosphorus (P) atom plus 4 times 2 oxygen (O) atoms equals 12 calcium (Ca) atoms plus 2 phosphorus (P) atoms plus 8 oxygen atoms (O)

As a result, there are 12 atoms of calcium (Ca), 2 atoms of phosphorus (P), and 8 atoms of oxygen in the formula Ca3(PO4)2 (O).

To know more about calcium phosphate, visit:

https://brainly.com/question/29231164

#SPJ4

The student's plan to determine the concentration of Ag in a solution of AgNO3 by combining 10 ml of AgNO3 with excess Na2SO4 is an example of a precipitation reaction.

In a precipitation reaction, two solutions are mixed together and an insoluble solid (precipitate) is formed, which can then be filtered and weighed to determine the amount of the precipitated species.

The reaction between AgNO3 and Na2SO4 can be written as follows:

AgNO3 + Na2SO4 → Ag2SO4 (precipitate) + 2 NaNO3 (dissolved)

The student would then filter the mixture to remove the precipitate, and weigh the precipitate to determine the amount of Ag2SO4 that was formed. The concentration of Ag in the solution can then be calculated using the stoichiometry of the reaction.

It is important to note that this method assumes that the precipitation reaction goes to completion, and that the Ag2SO4 precipitate does not dissolve in the solution. In practice, this may not always be the case, and it may be necessary to perform additional steps, such as adjusting the pH of the solution or adding a soluble salt, to ensure that the precipitation reaction goes to completion.

learn more about concentration of ag in a solution of agno3 at:

brainly.com/question/30139440

#SPJ4

The standard enthalpy of combustion of the glucose likely to be the higher  at blood temperature than at 25 °C. The value of the enthalpy at normal temperature is  - 2803 kJ.

The combustion of the glucose is as follows :

C₆H₁₂O₆ +  6O₂  ---->  6CO₂  +   6H₂O

The standard enthalpy = ∑ product - ∑ reactant

The standard enthalpy =( 6(-393.5) + 6(-285.8) - (-1273))

The standard enthalpy  = - 2803 kJ

The change in the enthalpy of the system is when one mole of the substance is completely burnt in the presence of the oxygen or the air at  given temperature is known as the enthalpy of combustion.

The standard enthalpy of combustion at blood temperature is higher than the normal temperature.

To learn more about enthalpy here

https://brainly.com/question/29473197

#SPJ4

The pH at which the ratio of unprotonated to protonated forms of ascorbic acid is equal is at a pH of approximately 4.2. At this pH, half of the ascorbic acid molecules are in their unprotonated form (ascorbate,[tex]C_6H_8O_6[/tex]), while the other half are in their protonated form (ascorbic acid, [tex]C_6H_7O_6H[/tex]).

What is pH

pH stands for "potential of hydrogen." It is a measure of the acidity or basicity of a solution and is defined as the negative logarithm of the concentration of hydrogen ions (H+) in a solution. The pH scale ranges from 0 to 14, with 7 being neutral, less than 7 being acidic, and greater than 7 being basic or alkaline.

Here you can learn more about ascorbic acid

brainly.com/question/11095182

#SPJ4

Relative atomic mass (Ar) or atomic weight is defined as the ratio of the average mass of atoms of a chemical element in a particular sample to the atomic mass constant.

One-twelfth of the mass of an atom of carbon-12 is the atomic mass constant, denoted by the symbol mu. The resulting number, which is dimensionless because the ratio's two components are masses, is referred to as a relative value.

Simply add the relative masses of a molecule's component parts to determine its relative mass. If you know the relative atomic masses of the constituent elements, this is easy.

Therefore, The weighted average of a molecule's mass in relation to one-twelfth of the mass of a carbon-12 atom is known as the relative molecular mass (Mr or RMM).

Learn more about atomic mass here:

https://brainly.com/question/17067547

#SPJ4

Answer:

flashlight I think I'm sorry if I'm wrong