Answer:
All of the above
Explanation:
I know about the first two choices but not so much about the last one
Gamma
ray
Which has the longest wavelength?
Ultra-
violet Infrared
Radio
Which has the highest frequency?
X-rays Visible
Microwave
WWW
Answer:
Radio waves
X-rays Visible
Explanation:
The wavelength of a wave is the difference between successive crests on a wave line. Waves with a very high wavelength have low energy.
Frequency is the number of waves that pass a point per unit of time. The higher the frequency, the higher a wave's energy.
From the given spectrum, wavelength increases from left to right. This puts radio waves as the wave with the longest wavelength. It is also right to say, it has the least energy. Also, frequency decrease from left to right. Gamma rays have the highest frequency in the spectrum. This is followed by x-rays.Answer:
Radio waves
X-rays Visible
Explanation:
Convert 122 moles of Methane to liters?
why people on earth cannot see the entire shape of the milky way
Answer:
Explanation:
That is because the Milkyway is full of dust and gas, you cannot really see something if it has dust and gas
Answer:
Its too far away to see
Explanation:
You would probably have to be in space
true or false there is a risk of explosion in factories handling powders such as custard powder
Answer:
True? I think so At least
Explanation:
what is the main function of this organelle in the cell?
Answer:
[tex]to \: use \: energy \: from \\ \: sunlight \: to \: make \: sugars.[/tex]
Explanation:
[tex]the \: main \: function \: of \: this \: organelle \\ \: in \: the \: cell \: is \: to \: use \: energy \: from \\ \: sunlight \: to \: make \: sugars.[/tex]
The first column of the periodic table is called the
A student states that photosynthesis is conducted only in plant cells and that cellular respiration occurs only in animal cells. Tell whether the student is correct and why. In your response, be sure to describe both processes and the structures involved. Upload your answer below.
Answer:
This is correct
Explanation:
This is correct because for photosynthesis you need organelles such as chloroplasts, chloroplasts absorb light energy and convert it into usable energy for plants. Animal cells do not have chloroplasts/similar organelles so they can't absorb energy from the sun, Animal cells use mitochondria which takes energy from our food and breaks it down into usable energy(such as ATP) to be transported.
How did John Newlands order the elements?
Hello friend! Hopefully this helps you as much as needed!
An English scientist called John Newlands put forward his Law of Octaves in 1864. He arranged all the elements known at the time into a table in order of relative atomic mass. He then put the similar elements into vertical columns, known as groups.
Find an element that has the same
number of valence electrons as
Thallium (T1).
i need the answer nowww
Answer:sodium
Explanation: because its not hard to look on the PERIODIC TABLE
compound name of SO2
The
force acting on an object is the combination of
all of the individual forces acting on it.
Check it
2 SCRATCHPAD
~ Improve this questio
Answer:
Yes as you can improve The invisible to human eye force or physical force if any being applied to a object of any mass and with all individual forces as they are acting on this object
Explanation:
how can prey benefit from the predator having a disease?
The disease can slow the predator down and the prey can get away easily.
Which description applies to a physical property? Choose the correct answer
O depends directly on the amount of the substance present
O examines changes in the composition and structure of matter
O measured or observed without changing the identity and composition of matter
O determined by changing the identity of a substance and observing how it reacts
Answer:
the third one, measured or observed without changing the identity and composition of matter. because physical property does not under go any change but can be put back.
What is the mass obtained of Ag from the reaction of 3 moles of AgCl
Given= Zn + 2AgCl —> ZnCl2 + 2Ag
Answer:
323.7g
Explanation:
Given parameters:
Number of moles of AgCl = 3 moles
Unknown:
Mass of Ag = ?
Solution:
We solve this problem by working from the known to the unknown;
The known here is AgCl;
From the balanced equation:
Zn + 2AgCl → ZnCl₂ + 2Ag
2 moles of AgCl will produce 2 moles of Ag
3 moles of AgCl will produce 3 moles of Ag
The mass of Ag will be;
Mass of Ag = number of moles x molar mass
Molar mass of Ag = 107.9g/mol
Mass of Ag = 3 x 107.9 = 323.7g
A student compared some chemical and physical properties of three pure substances. Her
data are recorded in the chart above. What is a logical conclusion the student can draw
about hare substances?
Pure substances have the same chemical and physical properties.
Pure substances have the same chemical properties, but different physical properties.
O Pure substances have the different chemical properties, but the same physical properties.
O Pure substances have different chemical and physical properties.
Answer:
letter b not c
Explanation:
next time please take a picture lucky i already took this
A mixture is made of two or more materials that
A. can be separated by physical means.
В.
cannot be separated by physical means.
C.
cannot be separated by any means.
D
can only be separated by chemical means.
Answer:
A. can be separated by physical means.
Explanation:
A mixture is when two different materials are put in the same container and no reaction occurs.
During evaporation, what causes certain liquid molecules to become vapor molecules? A. Decreased fluidity A. Increased viscosity A. Decreased kinetic energy A. Increased kinetic energy.
Answer:
The answer is A. Decreased Fluidity
Explanation:
Taking the test on preformance matters
In evaporation, particles of liquids take energy in the form of sunlight from the surrounding and then convert into vapor phase. Increased kinetic energy causes certain liquid molecules to become vapor molecules.
What is evaporation?Evaporation is a physical process in which the water in liquid state converts to gaseous state at the temperature below its boiling point. Evaporation happens before the boiling process.
Evaporation causes cooling effect in the surrounding. During summer when water is kept in earthen pot water cools, this is because of the evaporation process.
Evaporation is affected by temperature. As the temperature increases, kinetic energy of liquid molecules also increases and hence the rate of evaporation increases.
Therefore, increased kinetic energy causes certain liquid molecules to become vapor molecules.
To know more about evaporation, here:
https://brainly.com/question/8169606
#SPJ2
Help ASAP plzzzz!!!!!!!!
Answer:
Granite Solid
Milk Liquid
Neon is gas
Wood Is solid
Paper is solid
Helium is Gas
Water is liquid
Air is Gas
Alcohol is liquid
Metal is solid
Nitrogen is gas
Juice is liquid
Oil is liquid
Water Vapor is Gas
Brick is Solid
Propane is Gas
Fabric is solid
Gasoline is Liquid
Explanation:
Hope Dis helped :D :3
where is lithium used in the body?
Answer:
u
Explanation:
Which types of matter are made of atoms
a. Mixtures
b. Elements
C. Compounds
D. All of the above
Answer:
D all above yes I think it's all above
Answer: D
Explanation: All of the above.
Plz mark brainliest:)
A student combines two clear liquid chemicals together in a beaker. When the two chemicals are combined, bubbles are formed, the solution turns blue, and you can see flakes of something forming on the bottom of the beaker. Is this a physical or chemical change? Why?
Answer:
chemical change
Explanation:
A physical change is one that makes changes to the physical properties of matter. In many cases, the difference is usually reversible. Examples include boiling, melting, freezing, the magnetization of metals, etc.
A chemical change is one in which a new kind of matter is formed. It is usually accompanied by energy changes, i.e., the evolution or absorption of energy in the form of heat or light. This process is not easily reversible. Examples include; combustion, rusting of iron, precipitation, the souring of milk, etc.
From the question given, the combination of two clear liquid in a beaker which results to formation of bubbles and changes in coloration of the solution is a chemical change.
What purpose do neutrons serve in the nucleus ? What happens if there are too many or too few neutrons?
Answer:
These nuclei with different numbers of neurons are called isotopes
Answer:
neutrons' main function is to attract each other and keep the nucleus of an atom intact. a nucleus will become unstable if there are too many or too few neutrons in it.
Explanation:
too many= it will undergo beta decay (the neutrons will changes into proton)
too few= there will be an imbalance between forces which leads to nuclear imbalance
What is the purpose of the title of a line graph
Answer:
It tells about the data for each line graph is plotted.
Explanation:
Answer:
It can describe what the line graph is measuring and how it is measuring it
i dont get what it means by of touch
Answer:
So I don't know what do you mean by that, please be a little specific.
Explanation:
^^
Brainliest please helppppppppp
Ayour anwerser
Explanation
Answer:
chlorine manoxside
co2
Explanation:
Scott and James work at a grocery store. After the grocery
store closed, they were playing a game with a shopping cart
and Scott's skateboard. They crashed the skateboard and
the shopping cart two times. The shopping cart had more non
Answer: b) Crash 2; the force on the cart was stronger in this crash, so the force on the skateboard was also stronger.
Explanation:
Which of the following is NOT an example of a chemical change? *
O Corrosion
O Grinding
O Combustion
O Rust
1. Calculate the average atomic mass of iron if its abundance in nature is 15%-iron-55 and
85% iron-56
The average atomic mass of iron : 55.85 amu
Further explanationThe elements in nature have several types of isotopes
Isotopes are atoms whose no-atom has the same number of protons while still having a different number of neutrons.
An atomic mass unit = amu is a relative atomic mass of 1/12 the mass of an atom of carbon-12.
The 'amu' unit has now been replaced with a unit of 'u' only
Atomic mass is the average atomic mass of all its isotopes
atomic mass X = mass isotope 1 . % + mass isotope 2.% ...
The average atomic mass of iron
[tex]\tt =0.15\times 55+0.85\times 56\\\\=\boxed{\bold{55.85~amu}}[/tex]
The average atomic mass of iron : 55.85 amu
Calculation for average atomic mass:Isotopes are atoms whose atoms have the same number of protons while still having a different number of neutrons.
An atomic mass unit = amu is a relative atomic mass of 1/12 the mass of an atom of carbon-12.
The 'amu' unit has now been replaced with a unit of 'u' only
Atomic mass is the average atomic mass of all its isotopes.
Atomic mass X = mass isotope 1 * Mas % + mass isotope 2* Mass %
The average atomic mass of iron:
=0.15 * 55 + 0.85 * 56
=55.85 amu
Thus, the average atomic mass of iron : 55.85 amu
Find more information about Average atomic mass here:
brainly.com/question/338808
How did Thomson's experiment change Dalton's atomic model?
A. Thomson discovered that atoms changed properties when put in
an electric field.
B. Thomson discovered that atoms did not rearrange when forming
compounds.
C. Thomson discovered that atoms of one kind of element could
have different masses.
D. Thomson discovered that the atom contained smaller particles
called electrons.
Answer:
D. thomson discovered that the atom contains smaller particles called electrons
Thomson discovered that the atom contained smaller particles called electrons. The correct option is D.
What is Dalton's atomic model?Dalton proposed that all matter is composed of tiny indivisible particles known as atoms, which he envisioned as "solid, massy, hard, impenetrable, movable particle(s)."
Thomson's experiment altered Dalton's atomic model by revealing the existence of smaller particles known as electrons within the atom.
The first part of his theory states that all matter is made up of indivisible atoms. According to the second part of the theory, all atoms of a given element have the same mass and properties.
One of Dalton's most important contributions is that it does not violate several fundamental laws of chemical combination, including the law of definite proportions, the law of multiple proportions, and the law of conservation of mass.
Thus, the correct option is D.
For more details regarding Dalton's atomic model, visit:
https://brainly.com/question/12766754
#SPJ2
What is the most common isotope of lithium?