The statement is true because regarding U.S. GAAP and IFRS when it comes to guarding against overestimating variable consideration is that "Under IFRS, sellers only include an estimate of variable consideration to extent it is "probable".
IFRS requires that estimates of variable consideration be included only when the likelihood of significant reversal of revenue is “probable”, and this is a stricter standard than the “reasonably possible” standard under U.S. GAAP.
Under U.S. GAAP, estimates of variable consideration are only included when the amount of the estimate is both “reasonably possible” and “probable”. Therefore, U.S. GAAP and IFRS do not convey the same likelihood when it comes to the uncertainty associated with the variable consideration.
Under IFRS, the seller must be more certain that there will not be a significant reversal of revenue before including the estimate, while under U.S. GAAP, the seller only needs to be reasonably certain that there is a possibility of a significant reversal.
For more such questions on revenue
https://brainly.com/question/13440727
#SPJ11
Which of the following statements about the use of an organization's code of ethics is not true? a. The code of ethics must continually be applied to a company's decision-making processes and emphasized as an important part of its culture. b. Breaches in the code of ethics must be identified and dealt with appropriately O c. An effective code of ethics helps ensure that employees abide by the law, follow necessary regulations, and behave in an ethical manner d. An organization's code of ethics applies to its executives, managers, and hourly employees, but not its board of directors, who are often senior executives in other companies.
An effective code of ethics helps ensure that employees abide by the law, follow necessary regulations, and behave in an ethical manner. The code of ethics applies to all individuals in the organization, including board of directors.
An organization's code of ethics applies to its executives, managers, and hourly employees, but not its board of directors, who are often senior executives in other companies.
A code of ethics outlines the values, principles, and conduct standards that govern an organization's behavior. The purpose of a code of ethics is to establish a foundation of ethical behavior for all members of the organization to follow.
Therefore, it must apply to all members of the organization including the board of directors. It is not true that an organization's code of ethics applies to its executives, managers, and hourly employees, but not its board of directors, who are often senior executives in other companies.
For such more question on ethics:
https://brainly.com/question/20264892
#SPJ11
Given integer variables seedVal, smallestVal, and greatestVal, output a winning lottery ticket consisting of three random numbers in the range of smallestVal to greatestVal inclusive. End each output with a newline.
Ex: If smallestVal is 30 and greatestVal is 80, then one possible output is:
65
61
41
how do i code this in c++?
Answer:
Explanation:
Here's an example code in C++ that generates a winning lottery ticket consisting of three random numbers in the range of smallestVal to greatestVal:
#include <iostream>
#include <cstdlib>
#include <ctime>
using namespace std;
int main() {
int seedVal, smallestVal, greatestVal;
cout << "Enter seed value: ";
cin >> seedVal;
cout << "Enter smallest value: ";
cin >> smallestVal;
cout << "Enter greatest value: ";
cin >> greatestVal;
// Seed the random number generator with the user-input seed value
srand(seedVal);
// Generate three random numbers in the range of smallestVal to greatestVal
int lottery1 = rand() % (greatestVal - smallestVal + 1) + smallestVal;
int lottery2 = rand() % (greatestVal - smallestVal + 1) + smallestVal;
int lottery3 = rand() % (greatestVal - smallestVal + 1) + smallestVal;
// Output the winning lottery ticket
cout << lottery1 << endl;
cout << lottery2 << endl;
cout << lottery3 << endl;
return 0;
}
This code prompts the user to enter a seed value, the smallest and greatest values for the range of the lottery numbers. It then seeds the random number generator with the user-input seed value, generates three random numbers using rand() % (greatestVal - smallestVal + 1) + smallestVal to ensure the numbers fall within the range of smallestVal to greatestVal, and outputs the results on separate lines with a newline character.
difference between multimedia and ordinary text
Answer:
Multimedia uses a combination of different forms of media such as text, images, audio, video, and animations to communicate information and engage an audience, while ordinary text only uses written or typed words. Multimedia is often more engaging and immersive, while ordinary text is more straightforward and accessible. The choice between multimedia and ordinary text depends on the context, audience, and purpose of the content.
Explanation:
Multimedia refers to any content that uses a combination of different forms of media such as text, images, audio, video, and animations to convey information or engage an audience. In contrast, ordinary text refers to content that consists of words and sentences that are written or typed.
The key differences between multimedia and ordinary text are:
Types of media used: Multimedia combines different types of media, including text, images, audio, video, and animations. In contrast, ordinary text only uses written or typed words.
Communication of information: Multimedia is often used to communicate complex ideas or information in a more engaging and interactive way. Ordinary text is typically used to convey information in a more straightforward and concise manner.
Engagement: Multimedia content is often more engaging than ordinary text because it appeals to different senses and offers a more immersive experience. It can capture the attention of the audience and hold their interest for longer periods. Ordinary text, on the other hand, may be less engaging and may require more effort on the part of the reader to maintain interest.
Accessibility: Ordinary text is typically easier to access and consume than multimedia content, as it only requires basic reading skills. Multimedia content, on the other hand, may require more advanced technology and skills to access and use.
In summary, multimedia offers a more dynamic and engaging way to communicate information, while ordinary text is a more straightforward and accessible method for conveying information. The choice between multimedia and ordinary text will depend on the context, audience, and purpose of the content.
The remove function in the following program _____.
>>> aList = [9, 2, 3.5, 2]
>>> aList.remove(2)
removes all occurences of a 2 from a list.
removes the first occurence of 2 from the list
removes the item with an index of 2 from the list
removes all data values from the list
Differentiate between ICT and ICTs
ICT refers to the field of information and communication technologies as a whole, while ICTs refer to the individual technologies within that field such as computers, smartphones, and the internet.
What is internet?
The internet is a global network of interconnected computers and servers that communicate with each other using standard communication protocols, allowing people to access and share information and communicate with each other across geographical distances.
ICT stands for Information and Communication Technology, which is a term used to describe the combination of technologies used to manage and communicate information.
ICTs, on the other hand, stands for Information and Communication Technologies, which refers to the specific devices, tools, and technologies used for communication and information management, such as computers, smartphones, the internet, and various software and applications.
In summary, ICT is a broader term that encompasses various technologies used for managing and communicating information, while ICTs are specific technologies that fall under the ICT umbrella.
To know more about software visit:
brainly.com/question/1022352
#SPJ1
14.
(05.03 MC)
Which example of the always secure design principle states that the resiliency of software and devices against attacker attempts depends heavily on the protection of its at risk components? (5 points)
Psychological acceptability
Complete mediation
Separation of privilege
Weakest link
15.
(05.03 LC)
Which principle states that the confidentiality of a system should remain even when availability is interrupted? (5 points)
Failsafe defaults
Complete mediation
Open design
Weakest link
16.
(05.03 LC)
Which principle states that if the design is highly complex, chances are good that security vulnerabilities increase? (5 points)
Open design
Weakest link
Economy of mechanism
Failsafe defaults
17.
(05.03 LC)
Which key soft skill involves evaluating evidence with an open mind? (5 points)
Critical thinking
Communication
Teamwork
Enthusiasm
18.
(05.03 LC)
Darren was assigned a big project planning a new network for his company. The network will connect several computers throughout a building. Which type of hard skill will he need in this situation? (5 points)
Virtual private network
Local area network
Wide area network
Private area network
19.
(05.03 LC)
What is one method attackers might use to smuggle hidden messages within an unsuspecting file? (5 points)
Copyright
Encoding
Network steganography
Digital encryption
20.
(06.01 MC)
Jackson just started working for a large technology company and received a list of rules that must be followed. He must sign an agreement that he will follow these rules before he can start his job. Which term best describes this agreement? (5 points)
Methods
Procedures
Regulations
Recommendations
21.
(06.01 LC)
________ is the government agency responsible for creating and monitoring safe workspaces in the United States. (5 points)
FDA
DOE
OSHA
USDA
22.
(06.02 LC)
Sarah has ambition and drive to create innovative products and set her own working hours. What type of career opportunity should Iris consider? (5 points)
Mentorship
Leadership
Practicum
Entrepreneurship
23.
(06.03 LC)
Peter has some job experience, but he took some time off to travel and visit friends. Which résumé format should he avoid using due to gaps in his employment history? (5 points)
Video
Combination
Chronological
Functional
24.
(06.03 LC)
Which résumé format would be a good fit for individuals with little to no work experience? (5 points)
Chronological
Video
Functional
Combination
25.
(06.03 LC)
Amy abbreviated the date as 10.27.21 in her business letter. After proofreading her letter, she realized the date format was incorrect. What is the correct format for the date? (5 points)
Write a program that prompts an SPC grad to enter her hourly pay rate and weekday (M-F) hours worked, and weekend hours worked last week. All three values might not be integers.
Understanding that "time and a half applies to weekday hours in excess of forty, and that
"double time" applies to any weekend hours, calculate and print the grad's regular pay, overtime pay, weekend pay, and total pay for the week. Outputs should display currency format with S signs, two decimals, and commas for thousands. Write a program using python
Below is a Python program that does what you've described:
python
# Prompt the user to enter pay rate and hours worked
pay_rate = float(input("Enter your hourly pay rate: "))
weekday_hours = float(input("Enter the number of weekday hours worked: "))
weekend_hours = float(input("Enter the number of weekend hours worked: "))
# Calculate regular pay
if weekday_hours <= 40:
regular_pay = pay_rate * weekday_hours
else:
regular_pay = pay_rate * 40
# Calculate overtime pay
if weekday_hours > 40:
overtime_hours = weekday_hours - 40
overtime_pay = pay_rate * 1.5 * overtime_hours
else:
overtime_pay = 0
# Calculate weekend pay
weekend_pay = pay_rate * 2 * weekend_hours
# Calculate total pay
total_pay = regular_pay + overtime_pay + weekend_pay
# Display results
print(f"Regular pay: S{regular_pay:,.2f}")
print(f"Overtime pay: S{overtime_pay:,.2f}")
print(f"Weekend pay: S{weekend_pay:,.2f}")
print(f"Total pay: S{total_pay:,.2f}")
What is the program about?The way that the code above works is that:
The program prompts the user to enter their pay rate and the number of weekday and weekend hours worked.The program calculates the regular pay, which is the pay rate times the number of weekday hours worked, unless the number of weekday hours worked is greater than 40, in which case only the first 40 hours are paid at the regular rate.Therefore, program calculates the overtime pay, which is time and a half (1.5 times the pay rate) for each weekday hour worked in excess of 40.
Learn more about python from
https://brainly.com/question/26497128
#SPJ1
Given the following singly-linked list, what will be the value of the curNode's data after the second while loop iteration? students head dalom data Sam a null b. Tom c. Sam d. Tim 45) Which of the following is a linked list with a dummy node? I a head data: mul next data:ips data: Pasta net b. menu head null null list head data: 0 next data: 23 data: 12 met d. menu thead tail data Pina data Chips data Pasta
To answer this question, let's first look at what a singly-linked list is. It is a data structure where each element of the list contains a pointer to the next element in the list.
Here is an example of a singly-linked list:head -> A -> B -> C -> null Each element of the list is represented by a node. The first node in the list is called the head, and the last node in the list points to null. Each node contains a piece of data and a pointer to the next node in the list.Now let's look at the given linked list:head -> a -> null -> b -> Sam -> c -> Sam -> d -> Tim -> null We can see that the list contains four nodes: a, b, c, and d. The value of the cur Node's data after the first while loop iteration is "a", and after the second while loop iteration, it will be "b". This is because we are iterating through the list and checking each node's data against a given value. When we find a node with the given value, we delete it from the list. In the first iteration, we delete the node with the value "Sam", which is the second node in the list. After this deletion, the list looks like this:head -> a -> null -> b -> c -> Sam -> d -> Tim -> nullIn the second iteration, we delete the node with the value "Sam" again, which is the fifth node in the list. After this deletion, the list looks like this:Head -> a -> null -> b -> c -> d -> Tim -> null Therefore, the value of the cur Node's data after the second while loop iteration is "c". Now let's look at the second part of the question. A linked list with a dummy node is a linked list that contains a special node called a dummy node or a sentinel node. This node is not used to store any data, but it is used as a placeholder to simplify the code for certain operations. Here is an example of a linked list with a dummy node:head -> dummy -> A -> B -> C -> null The dummy node is the first node in the list, and it contains no data. Its purpose is to simplify the code for certain operations, such as deleting the first element in the list or inserting an element at the beginning of the list.for more such question on iteration
https://brainly.com/question/28134937
#SPJ11
how can website be used to increase ingagement in a business
Answer:
A website can be a powerful tool for increasing engagement in a business in several ways.
- Providing useful and relevant content.
- Making each visitor's experience personalized.
- Encourage visitors to share your content on social media.
- Offering rewards to customers who engage with your business.
- Creating fun and interactive elements on the website.
Identify the correct syntax to create a linked list of Integer values.
Group of answer choices
LinkedList<> linkedList = new Integer LinkedList;
LinkedList linkedList = new LinkedList (Integer);
LinkedList linkedList = new LinkedList();
Integer LinkedList linkedList = new LinkedList();
This statement creates a new LinkedList object that stores Integer values. LinkedList linkedList = new LinkedList().
How should a linked list be created using the correct code?Structure and pointers can be used to implement a linked list in C. struct LinkedList *next, struct LinkedList int data, and; Each node in the list is made using the aforementioned definition. The element is stored in the data field, and the following is a pointer to the address of the following node.
How is a linked list with values declared?Initially, a LinkedList of type String is declared. Next, to add values to the LinkedList, we utilise different iterations of the add method, such as add, andFirst, addLast, addAll, etc. Thus, we may add the component right.
To know more about LinkedList visit:-
https://brainly.com/question/22786070
#SPJ1
Which of the following is one way that a company could enhance their security and privacy to protect their intellectual property?
What is the difference between phishing and spoofing?
Answer:
Phishing and spoofing are two common types of online scams that are used to deceive people into giving away sensitive information. Although both terms are often used interchangeably, they refer to distinct types of attacks.
Phishing is a type of scam that involves the use of fraudulent emails, text messages, or websites that are designed to look like legitimate communications from reputable companies or individuals. The purpose of phishing is to trick people into providing personal information such as passwords, credit card numbers, or social security numbers. Phishing scams can be quite sophisticated, often using social engineering tactics to gain the trust of their victims.
Spoofing, on the other hand, is a broader term that refers to any act of impersonation or deception. In the context of online security, spoofing can refer to several types of attacks, including email spoofing, IP spoofing, and website spoofing. Email spoofing involves sending emails that appear to come from a trusted source, while IP spoofing involves changing the source IP address of a network packet to hide the true origin of the communication. Website spoofing involves creating fake websites that mimic legitimate sites in order to deceive users into giving away personal information.
Phishing is a specific type of spoofing that involves using fraudulent communications to trick people into giving away sensitive information. Spoofing, on the other hand, is a broader term that can refer to any act of impersonation or deception, including phishing.
Phishing is a type of cyber attack that involves sending fraudulent emails or messages to trick individuals into revealing sensitive information, such as passwords or credit card numbers.
What is cyber attacks?Any offensive maneuver that targets computer information systems, computer networks, infrastructures, personal computer devices, or smartphones is referred to as a cyberattack.
Both phishing and spoofing are types of cyber attacks used to steal sensitive information or money from unsuspecting victims. While they are similar in nature, they have some significant differences.
Phishing attacks frequently appear to be from legitimate sources, such as banks or social media platforms, and will frequently include a sense of urgency to compel people to act quickly.
Spoofing, on the other hand, is a type of cyber attack in which a malicious entity or individual impersonates a legitimate entity or individual in order to gain access to sensitive information or carry out malicious activities.
Thus, the main difference between the two is that phishing involves tricking individuals into revealing sensitive information, while spoofing involves impersonating a legitimate entity or individual in order to gain access to sensitive information or to carry out malicious activities.
For more details regarding cyberattacks, visit:
https://brainly.com/question/30093347
#SPJ5
Write a program that inputs the value 437 using each of the scanf integer conversion specifiers. Print each input value using all the integer conversion specifiers.
Which of the following is a measurement of the maximum amount of data that can be transferred over a particular network segment?
Answer:
When you purchase bandwidth, a specification for the volume of data transferred over time, such as Mbps, gigabits, etc., is typically included. That is the speed in theory. Measure the actual speed.
Explanation:
Network bandwidth refers to the maximum rate at which data may be transmitted via a wired or wireless communications link in a specific amount of time. The amount of bits, kilobits, megabits, or gigabits that can be transmitted in a second is typically used to describe bandwidth.
if you happy for my answer please like and give me a crown :)
find the smallest positive integer not relatively prime to 2015 that has the same number of positive divisors as 2015.
The smallest positive integer not relatively prime to 2015 that has the same number of positive divisors as 2015 is $\boxed{4225}$.
We know that $2015 = 5 \cdot 13 \cdot 31$, and $2015$ has $2^2 \cdot 4 = 16$ positive divisors.
To find the smallest positive integer not relatively prime to 2015 that has the same number of positive divisors as 2015, we can factor the number into its prime factorization, and multiply some powers of those primes together.
For example, we could take $5^2 \cdot 13 = 325$, which has $(2+1)(1+1) = 6$ positive divisors, just like $2015$. However, 325 and 2015 are relatively prime.
To fix this, we need to multiply by a factor that shares a prime factor with 2015. The only primes we have to work with are 5, 13, and 31. We can't multiply by 5 or 31, because then our number would be greater than 2015.
However, we could multiply by 13. Taking $325 \cdot 13 = 4225$, we have a number with the same number of positive divisors as 2015.
Note that $(2+1)(1+1)(1+1) = 12$, which is different from 16, but we're looking for the smallest such number, and this is the best we can do.
Therefore, the smallest positive integer not relatively prime to 2015 that has the same number of positive divisors as 2015 is $\boxed{4225}$.
For such more question on integer:
https://brainly.com/question/29692224
#SPJ11
given the array declaration, int a[20]; the last element is written as: group of answer choices a[1] a[0] a[19] a[20]
The array declaration int a[20] creates an integer array a with a length of 20. In most programming languages, including C and C++, arrays are zero-indexed, which means that the first element of the array has an index of 0, and the last element has an index of length-1.
Therefore, the last element of the array a can be accessed using the expression a[length-1].
In this case, the array a has a length of 20, so the last element is at index 20-1 = 19. Thus, the correct way to access the last element of the array a is to use the expression a[19]. Attempting to access the element a[20] would result in accessing a memory location outside the bounds of the array, which can cause undefined behavior or program crashes.
To know more about array click here:
brainly.com/question/30757831
#SPJ4
1.
(04.01 MC)
The main purpose of an intrusion detection system is to (5 points)
analyze network traffic
block malicious malware
prevent adware
filter and block web browsing activity
2.
(04.01 LC)
Intrusion detection system sensors are responsible for (5 points)
collecting data on network traffic
determining if intrusion detection has occurred
providing guidance on network breaches
determining if a security breach has occurred
3.
(04.01 LC)
Which logical component of an intrusion detection system is responsible for determining if an intrusion has occurred? (5 points)
Analyzers
Network interface
Sensors
User interface
4.
(04.02 LC)
Which of the following captures information from a single host, such as a firewall? (5 points)
Time stamp
NIDS
HIDS
Detector
5.
(04.02 MC)
Jax is a system administrator and has noticed an increase in false positive alerts from the network IDS. Why are false positives considered dangerous? (5 points)
They can blind Jax from noticing an actual attack.
They lack incident timestamps.
They are usually malware attacks.
They use up system resources.
6.
(04.03 LC)
Which of the following classifies critical data and identifies violations of policies defined by organizations? (5 points)
ATP
DLP
FTP
UTM
7.
(04.03 LC)
A _________ cyberattack occurs when a flaw or vulnerability is exploited before a patch can be created. (5 points)
virus
spyware
malware
zero-day
8.
(04.03 MC)
Hailey is an intern for a large technology company and was asked to find a list of IP addresses currently using the network. What type of scanning will Hailey use to do this? (5 points)
Port scanning
Vulnerability scanning
Network scanning
Web scanning
9.
(04.04 LC)
Which scanning tool can show the MAC address of the interface associated with each IP address the local host has recently communicated with? (5 points)
ipconfig
NMAP
ping
control
10.
(05.01 MC)
Which of the following is considered a limitation of virtualization? (5 points)
Fewer servers means greater impact from hardware failures.
It is challenging to test different security situations.
It is harder to alleviate hardware vulnerabilities.
Costs are higher because more devices are required.
11.
(05.01 LC)
What does a hacker use to run code on a virtual machine to allow an operating system to break out and interact directly with the hypervisor? (5 points)
IP targeting
VM escaping
Spoofing
Tailgating
12.
(05.01 MC)
Sampson received an instant message from someone claiming to work for her company's HR department. It said the company was updating their software and her account would be suspended unless she provided her personal login username and password. Which type of social engineering scam is this? (5 points)
Pretexting
Quid pro quo
Baiting
Phishing
13.
(05.01 MC)
_________ is the term for when someone harasses another person on the internet in an attempt to steal their personal information. (5 points)
Snooping
Eavesdropping
Cyberstalking
Phishing
write the pseudocode to represent the logic of a simple input and output program
Which of the following describes a text file containing multiple commands that would usually be entered manually at the command prompt?
It can be used to automate repetitive tasks, elimination the need to manually type in the same commands repeatedly. The commands are stored in the text file, and then the batch file is executed.
This allows the user to perform a task quickly and easily by simply double-clicking on the file. The commands stored in the batch file can include any valid command line instructions, including running programs, copying files, deleting files, and so on. To create a batch file, the user first creates a text file using any text editor. The commands that the user wants to be included in the batch file are then entered into the text file, one line at a time. The file must then be saved in a specific format, usually with a “.bat” file extension. This format tells the computer that the file contains executable commands, as opposed to just a text file. The file is then double-clicked to execute the commands stored in the batch file. Batch files can be used to quickly perform tasks such as creating backups, installing programs, running programs, and so on. They can be used to automate complex or repetitive tasks, saving time and effort. Batch files are also useful for creating shortcuts for frequently used commands.for more such question on elimination
https://brainly.com/question/24078509
#SPJ11
When removing curNode from a doubly-linked list with at least 2 elements, the list's tail may be assigned with _____
The prior node of the curNode, which would become the new tail node if cur Node, may be allocated to the list's tail when cur Node is removed from a doubly-linked list with at least two members.
What is necessary to remove a node from a doubly linked list?When removing a node from a doubly linked list: The prior node that has to be erased must be located. It is necessary to modify the previous node's next. It is necessary to release the memory of the node that has to be destroyed.
What is the time complexity of removing a node from the link list's end?Space complexity is O(1) and temporal complexity is O(N), where N is the total number of variables.
To know more about curNode visit:-
https://brainly.com/question/30883960
#SPJ1
complete the sentences describing a cycle. during the step, the cpu gets the instruction from memory.
The CPU begins by retrieving certain information and commands (programmes) from main memory and storing them in its own internal temporary memory sections. "Registers" are the name for these memory locations.
What phases comprises a CPU processing cycle?The most fundamental CPU function can be carried out at millions of machine cycles per second by today's CPUs. Three typical steps make up the cycle: fetch, decode, and execute. In some circumstances, the cycle also includes a store.
What are the 4 steps in a CPU process, and what do they do?A processor's four main tasks are fetch, decode, execute, and write back. Fetching is the process of retrieving instructions from system RAM into programme memory.
To know more about CPU visit:-
https://brainly.com/question/30751834
#SPJ1
What is information
problem 35 write a query to display the number of products in each category that have a water base, sorted by category (figure p7.35
To display the number of products in each category that have a water base, sorted by category, you can use the following SQL query:
SELECT Category, COUNT(*) AS NumOfWaterBasedProductsFROM ProductsWHERE Base = 'Water'GROUP BY CategoryORDER BY Category;This query uses the SELECT statement to retrieve the Category column and the count of the number of products with a water base for each category. The COUNT(*) function is used to count the number of rows returned by the WHERE clause, which specifies that only products with a water base should be included.The GROUP BY clause is used to group the results by Category, so that the count is calculated for each category separately. Finally, the ORDER BY clause sorts the results by Category in ascending order.This query will return a table showing the number of products with a water base in each category, sorted by category.
To learn more about SQL click the link below:
brainly.com/question/30456711
#SPJ4
Which of the following redirection operators appends a program's standard output to an existing file, without overwriting that file's original contents?
|
2>
&>
>
>>
The ">>" operator is the correct answer when it comes to the following redirection operators that append a program's standard output to an existing file without overwriting that file's original contents. Therefore the correct option is option E,
Output redirection is the process of directing the output of a command or script to a file instead of the screen. This could be useful for preserving output data for future reference or for processing by other programs, among other reasons.
The '>' operator: This redirection operator overwrites a file's current content with the command's output. The operator does not append to the end of a file but instead replaces it with the current command's output. In general, this redirection operator creates a new file if the specified file does not exist.
In other words, it can be used to capture all errors generated by a command so that they can be saved for later analysis.>> operator: This redirection operator is used to append output from a command to the end of a file rather than overwriting the entire contents of the file, as the '>' operator does.
This redirection operator appends to the file specified in the argument rather than replacing it.
For such more question on operator:
https://brainly.com/question/28968269
#SPJ11
The average of three numbers, value1, value2, and value3, is given by (value1 + value2 + value3)/ 3.0. Write a program that reads double variables value1, value2, and value3 from the input, respectively, and computes averageOfThree using the formula. Then, outputs "Average is " followed by the value of averageOfThree to four digits after the decimal point. End with a newline.
Ex: If the input is 2.25 2.0 1.75, then the output is:
Average is 2.0000
Please help!
Answer:
#include <stdio.h>
int main(void) {
double value1, value2, value3;
double averageOfThree;
/* Read 3 double values */
scanf("%lf %lf %lf", &value1, &value2, &value3);
/* Compute the average */
averageOfThree = (value1 + value2 + value3) / 3.0;
/* Output the average */
printf("Average is %.4lf\n", averageOfThree);
return 0;
}
which of the following is an example of a relative reference in excel? question 4 options: b$7 b7 $b7 $b$7
In Microsoft Excel, a relative reference is a cell reference that changes when you copy the formula to another location. Among the given options, the example of a relative reference in Excel is "b7".
When you copy a formula with a relative reference, the reference will change relative to the new location of the formula. For instance, if you copy the formula "=B72" from cell A1 to cell A2, the formula in A2 will change to "=B82" because the reference in the formula is relative to the new location of the formula. In contrast, an absolute reference remains constant regardless of where the formula is copied. To make a reference absolute, you can add a dollar sign ($) before the column and row reference
Find out more about Microsoft Excel
brainly.com/question/24202382
#SPJ4
true/false. Before OS X, the Hierarchical File System (HFS) was used, in which files are stored in directories (folders) that can be nested in other directories.
The given statement "Before OS X, the Hierarchical File System (HFS) was used, in which files are stored in directories (folders) that can be nested in other directories." is True because, before OS X, the Hierarchical File System (HFS) was used for organizing and storing data.
The Hierarchical File System (HFS) is a great way to store data, as it provides an organized, hierarchical structure to store and access files. This system allows users to create folders and subfolders within folders, and to place items within each folder. This makes it easier for users to locate files, as they can be found within a certain directory. The Hierarchical File System also allows for better data management, as users can create multiple folders to store different types of data.
Overall, the Hierarchical File System (HFS) is an efficient way to store and organize data. It is a great way to organize data in an organized, hierarchical structure, which makes it easy to locate files and access data quickly. It also provides better data management, as users can create multiple folders to store different types of data, and better security, as users can set access rights for each folder and its contents.
Know more about Hierarchical structure here :
https://brainly.com/question/30586274
#SPJ11
** MUST BE PSEUDOCODE FOR CORAL**
I AM STUCK I GOT A 5/10 IM NOT SURE WHAT I AM MISSING IN MY CODE. PLEASE HELP
The provided code is suppose to be for a guessing game between two players. In this game, player 1 picks the number of guess attempts and a whole number value to be guessed. No indication is given if player 2 has gotten the value guessed correctly, as player 2 is expected to make all of the guesses and find out if they got it right at the end.
However the code provided does not function as expected. The expectation is that the function check_guess() will allow enable to get the value from player 1 and player 2 and return 1 if the value matches and 0 if it does match.
Player 1 will give a specific number of attempts to guess the number and the number being guessed can be any value as represented by the first two numbers entered into the input. The remaining inputs represent the guess of the values by player 2.
Answer:
There seems to be an error in the provided code. Specifically, the condition in the while loop is incorrect: while count >= guesses should be while count < guesses. This is causing the loop to never execute, so only the initial values of player1 and found are being checked, which is why the output is always "Player 2 Did Not Guess the Number".
Here's the corrected code in pseudo code:
Function check_guess(integer player1, integer player2) returns integer answer
if player1 == player2
answer = 1
else
answer = 0
Function Main() returns nothing
integer player1
integer player2
integer guesses
integer found
integer count
guesses = Get next input
player1 = Get next input
found = 0
count = 0
while count < guesses
player2 = Get next input
if found != 1
found = check_guess(player1, player2)
count = count + 1
if found == 1
Put "Player 2 Found the Number: " to output
Put player1 to output
else
Put "Player 2 Did Not Guess the Number: " to output
Put player1 to output
With this corrected code, the output for the provided inputs will be as follows:
Input: 10 5 1 2 3 4 5 6 7 8 9 10
Expected Output: Player 2 Found the Number: 5
Input: 7 -7 -1 -2 -3 -4 -5 -6 -7
Expected Output: Player 2 Found the Number: -7
Input: 8 0 -4 -3 -2 -1 0 1 2 3
Expected Output: Player 2 Found the Number: 0
Input: 9 1.5 2.5 3.5 4.5 1.5 5.5 6.5 7.5 8.5 9.5
Expected Output: Player 2 Found the Number: 1
which of the following is an example of the type of data that advertising networks automatically collect and share with businesses?
Answer:
The answer would "the cost of each ad you publish".
Explanation:
Please like my answer if you happy and give me a crown
Examine the following code: CREATE OR REPLACE PROCEDURE update sal(v emp id NUMBER, v increment NUMBER) BEGIN UPDATE emp SET salary- salary +v increment WHERE employee id-v_emp_iod; END update_sal; CREATE OR REPLACE PROCEDURE do update (b emp id NUMBER, b increment NUMBER) BEGIN update_sal (b emp id, b increment); END do_update; After compiling the two procedures, you invoke the do update procedure using the following code: EXECUTE do update (12, 5000); Which statements are correct with reference to this code? (Choose all that apply.) A. The b _emp id and b_increment parameters are actual parameters for the do update procedure. B. The b emp id and b increment parameters are actual parameters for the update sal procedure. C. The b emp id and b increment parameters are formal parameters for the update sal procedure. D. The v emp id and v increment parameters are actual parameters for the update sal procedure. E. The v emp_ id and v_increment parameters are formal parameters for the update sal procedure.
A, C, and E are correct with reference to the given code. This code has two actual parameters: 12 (b_emp_id) and 5000 (b_increment).
These parameters are passed to the do update procedure and then forwarded to the update sal procedure. The update sal procedure has two formal parameters: v_emp_id and v_increment. These parameters receive the values 12 and 5000 respectively and update the emp table in the database.
In conclusion, A, C, and E are correct with reference to the code. A is correct because the b_emp_id and b_increment parameters are actual parameters for the do update procedure. C is correct because the b_emp_id and b_increment parameters are formal parameters for the update sal procedure.
Lastly, E is correct because the v_emp_id and v_increment parameters are formal parameters for the update sal procedure. So, A, C, and E are correct with reference to the given code.
for more such questions on parameters.
https://brainly.com/question/30384148
#SPJ11