We call the acceleration of an object moving in uniform circular motion— resulting from a net external force—the centripetal ...
A 92-kg man climbs into a car with worn out shock absorbers, and this causes the car to drop down 4.5 cm. As he drives along he hits a bump, which starts the car oscillating at an angular frequency of 4.52 rad/s. What is the mass of the car ?A) 890 kg
B) 1900 kg
C) 920 kg
D) 990 kg
E) 760 kg
Answer:
the mass of the car is 890 kg
Explanation:
Given;
mass of the man, m = 92 kg
displacement of the car's spring, x = 4.5 cm = 0.045 m
acceleration due to gravity, g = 9.8 m/s²
The spring constant of the car,
f = kx
where;
f is the weight of the man on the car = mg
mg = kx
k = mg/x
k = (92 x 9.8) / 0.045
k = 20,035.56 N/m
The angular speed of car, ω, when the is inside is given as 4.52 rad/s
The total mass of the car and the man is calculated as;
[tex]\omega = \sqrt{\frac{k}{m} } \\\\\omega^2 = \frac{k}{m} \\\\m = \frac{k}{\omega^2} = \frac{20,035.56}{(4.52)^2} = 980.7 \ kg[/tex]
The mass of the car alone = 980.7 kg - 92 kg
= 888.7 kg
≅ 890 kg
Therefore, the mass of the car is 890 kg
There are only two charged particles in a particular region. Particle 1 carries a charge of 3q and is located on the negative x-axis a distance d from the origin. Particle 2 carries a charge of -2q and is located on the positive x-axis a distance d from the origin.
Required:
Where is it possible to have the net field caused by these two charges equal to zero?
Answer:
The net field will be the sum of the fields created by each charge.
where the charge Q in a position r' is given by:
E(r) = k*Q/(r - r')^2
Where k is a constant, and r is the point where we are calculating the electric field.
Then for the charge 3q, in the position r₁ = (-d, 0, 0) the electric field will be:
E₁(r) = k*3q/(r - r₁)^2
While for the other charge of -2q in the position r₂ = (d, 0, 0)
The electric field is:
E₂(r) = -k*2*q/(r - r₂)^2
Then the net field at the point r is:
E(r) = E₁(r) + E₂(r) = k*3q/(r - r₁)^2 + -k*2*q/(r - r₂)^2
E(r) = k*q*( 3/(r - r₁)^2 - 2/(r - r₂)^2)
Then if the we want to find the points r = (x, y, z) such that:
E(r) = 0 = k*q*( 3/(r - r₁)^2 - -k*2*q/(r - r₂)^2)
Then we must have:
0 = ( 3/(r - r₁)^2 - 2/(r - r₂)^2)
Also remember that the distance between two points:
(x, y, z) and (x', y', z') is given by:
D = √( (x - x')^2 + (y - y)^2 + (z -z')^2)
Then we can rewrite:
r - r₁ = √( (x - (-d))^2 + (y - 0 )^2 + (z -0)^2)
= √( (x + d))^2 + y^2 + z^2)
and
r - r₂ = √( (x - d)^2 + (y - 0 )^2 + (z -0)^2)
= √( (x - d))^2 + y^2 + z^2)
Replacing that in our equation we get:
0 = ( 3/(√( (x + d))^2 + y^2 + z^2))^2 - -k*2*q/(√( (x - d))^2 + y^2 + z^2))^2)
0 = (3/((x + d))^2 + y^2 + z^2) - 2/ (x - d))^2 + y^2 + z^2)
We want to find the values of x, y, z such that the above equation is true.
2/ (x - d))^2 + y^2 + z^2) = (3/((x + d))^2 + y^2 + z^2)
2*[((x + d))^2 + y^2 + z^2] = 3*[(x - d))^2 + y^2 + z^2]
2*(x + d)^2 + 2*y^2 + 2*z^2 = 3*(x - d)^2 + 3*y^2 + 3*z^2
2*(x + d)^2 - 3*(x - d)^2 = 3*y^2 + 3*z^2 - 2*y^2 - 2*z^2
2*(x + d)^2 - 3*(x - d)^2 = y^2 + z^2
2*x^2 + 2*2*x*d + 2*d^2 - 3*x^2 + 3*2*x*d - 3*d^2 = y^2 + z^2
-x^2 + 10*x*d - d^2 = y^2 + z^2
we can rewrite this as:
- ( x^2 - 10*x*d + d^2) = y^2 + z^2
now we can add and subtract 24*d^2 inside the parenthesis to get
- ( x^2 - 10*x*d + d^2 + 24*d^2 - 24*d^2) = y^2 + z^2
-( x^2 - 2*x*(5d) + 25d^2 - 24d^2) = y^2 + z^2
-(x^2 - 2*x*(5d) + (5*d)^2) + 24d^2 = y^2 + z^2
The thing inside the parenthesis is a perfect square:
-(x - 5d)^2 + 24d^2 = y^2 + z^2
we can rewrite this as:
24d^2 = y^2 + z^2 + (x - 5d)^2
This equation gives us the points (x, y, z) such that the electric field is zero.
Where we need to replace two of these values to find the other, for example, if y = z = 0
24d^2 = (x - 5d)^2
√(24d^2) = x - 5d
√24*d = x - 5d
√24*d + 5d = x
so in the point (√24*d + 5d, 0, 0) the net field is zero.
The fact that we can define electric potential energy means that:
A) the electric force is nonconservative
B) the electric force is conservative
C) the work done on a charged particle depends on the path it takes
D) there is a point where the electric potential energy is exactly zero
E) it takes work for the electric force to move from some point a to some other point b and back again
Answer: I'd go with Option B if you're allowed to pick One Option Only.
Option A is wrong. Electric Forces arent Non - Conservative. They're Conservative forces.
Option B: We Can Only Define Potential Energies for conservative Forces/fields✅
Option C is wrong. Since the Electric Force is Conservative... It doesn't depend on the path taken.
Option D... There's a Point where the electric Potential Energy is Zero but the separation Distance Would be large.
E is wrong because the Workdone around a closed path is Zero.
The electric potential energy results from the conservative Coulomb forces.
What is electric potential energy?The electric potential energy is the potential energy that results due to the conservative Coulomb forces and is always associated with the set of two charged particles.
Any object can have electric potential energy by two key elements first is its own charge and the second is its position with respect to the other charged particle.
The electric potential energy-containing only one point charge will be zero. Because there are no other sources of electrostatic force against which an external agent must do work in moving the point charge from infinity to its final position.
Thus the electric potential energy results from the conservative Coulomb forces.
To know more about Electric potential energy follow
https://brainly.com/question/24648428
A certain electric stove has a 16 Ω heating element. The current going through the element is 15 A. Calculate the voltage across the element.
The voltage across the element is = 240 V
I hope you understand....
Mark me as brainliest....
Thanks...
A student solving a physics problem to find the unknown has applied physics principles and obtained the expression: μkmgcosθ=mgsinθ−ma, where g=9.80meter/second2, a=3.60meter/second2, θ=27.0∘, and m is not given. Which of the following represents a simplified expression for μk?A student solving a physics problem to find the unknown has applied physics principles and obtained the expression: , where , , , and is not given. Which of the following represents a simplified expression for ?tanθ− agTo avoid making mistakes, the expression should not be simplified until the numerical values are substituted.gsinθ−agcosθThe single equation has two unknowns and cannot be solved with the information given.
Solution :
Given expression :
[tex]$\mu_k$[/tex]mgcosθ = mgsinθ − ma
Here, g = 9.8 [tex]m/s^2[/tex] , a = 3.60 [tex]m/s^2[/tex] , θ = 27°
Therefore,
[tex]$\mu_k mg \cos \theta = mg \sin \theta - ma$[/tex]
[tex]$\mu_k mg \cos \theta = m(g \sin \theta - a)$[/tex]
[tex]$\mu_k g \cos \theta = (g \sin \theta - a)$[/tex]
[tex]$\mu_k =\frac{(g \sin \theta-a)}{g \cos \theta}$[/tex]
Mow calculating the coefficient of kinetic friction as follows :
[tex]$\mu_k=\frac{g \sin \theta-a}{g \cos \theta}$[/tex]
[tex]$\mu_k=\frac{9.8 \times \sin 27^\circ-3.60}{9.8 \times \cos 27^\circ}$[/tex]
[tex]$\mu_k=0.097$[/tex]
An electron is moving through an (almost) empty universe at a speed of 628 km,/s toward the only other object in the universe — an insulating sphere with a diameter of 4 m and charge density 3nC/m2 on its outside surface. The sphere "captures" the electron, which falls into a circular orbit.
Required:
Find the radius and period of the orbit.
Answer:
r = 2,026 10⁹ m and T = 2.027 10⁴ s
Explanation:
For this exercise let's use Newton's second law
F = m a
where the force is electric
F = [tex]k \frac{q_1q_2}{r^2}[/tex]
Acceleration is centripetal
a = v² / r
we substitute
[tex]k \frac{q_1q_2}{r^2} = m \frac{v^2}{r}[/tex]
r = [tex]k \frac{q_1q_2}{m \ v^2}[/tex] (1)
let's look for the charge in the insulating sphere
ρ = q₂ / V
q₂ = ρ V
the volume of the sphere is
v = 4/3 π r³
we substitute
q₂ = ρ [tex]\frac{4}{3}[/tex] π r³
q₂ = 3 10⁻⁹ [tex]\frac{4}{3}[/tex] π 4³
q₂ = 8.04 10⁻⁷ C
let's calculate the radius with equation 1
r = 9 10⁹ 1.6 10⁻¹⁹ 8.04 10⁻⁷ /(9.1 10⁻³¹ 628 10³)
r = 2,026 10⁹ m
this is the radius of the electron orbit around the charged sphere.
Since the orbit is circulating, the speed (speed modulus) is constant, we can use the uniform motion ratio
v = x / t
the distance traveled in a circle is
x = 2π r
In this case, time is the period
v = 2π r /T
T = 2π r /v
let's calculate
T = 2π 2,026 10⁹/628 103
T = 2.027 10⁴ s
What is the electric field 3.9 m from the center of the terminal of a Van de Graaff with a 6.60 mC charge, noting that the field is equivalent to that of a point charge at the center of the terminal
Answer:
the electric field is 3.91 x 10⁶ N/C
Explanation:
Given the data in the question;
Electric field at a point due to point charge is;
E = kq/r²
where k is the constant, r is the distance from centre of terminal to point where electric field is, q is the excess charge placed on the centre of terminal of Van de Graff,a generator
Now, given that r = 3.9 m, k = 9.0 x 10⁹ Nm²/C², q = 6.60 mC = 6.60 x 10⁻³ C
so we substitute into the formula
E = [(9.0 x 10⁹ Nm²/C²)( 6.60 x 10⁻³ C)] / ( 3.9 )²
E = 59400000 / 15.21
E = 3.91 x 10⁶ N/C
Therefore, the electric field is 3.91 x 10⁶ N/C
human activities that interfere with distribution of natural resources are contributing to the increase of earthquake risk.
Answer:
Changes in climate conditions, especially the warming of global temperatures increases the likelihood of weather-related natural disasters. ... This is most visible when seen through changes in the intensity and frequency of droughts, storms, floods, extreme temperatures and wildfires.
What is the y component of a vector that is 673 m at -38o?
Answer:
D_y = 414.38m
Explanation:
D_y = D*sin(x)
D_y = 673m*sin(38°)
D_y = 414.38m
The ejection seat has an acceleration of 8gees (8xgravity or ~80m/s/s). He has a mass of 70kg. The total force on him from the chair/rocket would be.
A) (80m/s/s)(70kg)=5600N
B) (80m/s/s)(70kg)=5600N + Fg = 5600N+(70kg)(9.8N/kg)~5600N+700N=6300N
C) (80m/s/s)(70kg)=5600N - Fg = 5600N+(70kg)(9.8N/kg)~5600N-700N=4900N
D) I need the time
Answer:
B) (80m/s/s)(70kg)=5600N + Fg = 5600N+(70kg)(9.8N/kg)~5600N+700N=6300N
Explanation:
The total force by the chair is given by the following formula:
[tex]F = m(g+a)[/tex]
where,
F = Force = ?
m = mass of person = 70 kg
g = value of acceleration dueto gravity = 9.81 m/s²
a = acceleration of ejection seat = 8g = 80 m/s²
Therefore,
[tex]F = mg+ma \\F = (70\ kg)(9.8\ m/s^2)+(70\ kg)(80\ m/s^2)\\F = 6300 N[/tex]
Therefore, the correct option is:
B) (80m/s/s)(70kg)=5600N + Fg = 5600N+(70kg (9.8N/kg)~5600N+700N=6300N
A ceramic tile measuring 50 cm x50cm has been designed to bear a pressure of 40 N/in . Will it with stand a force of 5 N?
Answer:
The ceramic tile will stand the force of 5 N.
Explanation:
Step 1: Calculate the area (A) of the ceramic tile
We will use the formula for the area of a square.
A = 50 cm × 50 cm = 2500 cm²
Step 2: Convert "A" to in²
We will use the conversion factor 1 in² = 6.45 cm².
2500 cm² × 1 in²/6.45 cm² = 3.9 × 10² in²
Step 3: Calculate the pressure (P) exerted by a force (F) of 5 N
We will use the following expression.
P = F/A
P = 5 N / 3.9 × 10² in² = 0.013 N/in²
Since the pressure exerted would be less than the maximum pressure resisted (40 N/in²), the ceramic tile will stand the force of 5 N.
Prepare a stock available at home following the procedure you learned in this lesson. Have a picture of the finished product and a narration on how you do it
Answer:
NO, 1. is stocks
2. is also stocks
bouquit GARNI IS NUMBER 3
NUMBER 4 IS ACID PRODUCTS
number 5 is brown stock
Explanation:
stocks are bones
On a day when the speed of sound is 345 m/s, a 440 Hz tuning fork causes a tube closed at one end to vibrate in the second harmonic. How long is the tube?
Answer:
Length = 3.136 meters
Explanation:
Given the following data;
Speed = 345 m/s
Frequency = 440 Hz
To find how long is the tube;
First of all, we would determine the wavelength;
Wavelength = speed/frequency
Wavelength = 345/440
Wavelength = 0.784 m
Next, we would determine how long is the tube using the formula;
[tex] Length = \frac {2n - 1}{4} * wavelength [/tex]
Substituting into the formula, we have;
[tex] Length = \frac {2*1 - 1}{4} * 0.784 [/tex]
[tex] Length = \frac {2 - 1}{4} * 0.784 [/tex]
[tex] Length = \frac {1}{4} * 0.784 [/tex]
Length = 3.136 meters
Describe how the constant electric potential from the battery drives the charges in the conducting wire in your own words.
Explanation:
It is known that charges tend to move from a higher potential towards lower potential. As a result, charges tend to move from a positive terminal to negative terminal of the battery.
For example, at a certain height water is stored in a water tank. This height is correspondent to the constant potential and water contained is the charge present in the battery.
When a pipe is connected from the tank to the ground then water will start moving towards the ground and similarly if a conducting wire is connected across the battery then charge will also begin to flow in the same direction which is called current.
a 50kg skater on level ice, has built up her speed to 30km/h. how far will she coast before sliding friction dissipates her energy?
Answer:
belpw
Explanation:
The distance prior to the sliding friction dispersing her energy would be:
- The distance will remain unaffected by the sliding friction i.e. 354m
As we know, When Sliding friction dissolves her energy, leading her Kinetic Energy to turn 0 on coming to the state of rest. So,
[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex] (∵ Work in -ve denotes it is done opposite to friction)
Given that,
m(mass) [tex]= 50 kg[/tex]
v(velocity) [tex]= 30 km/hr[/tex] or [tex]8.33 m/s[/tex]
The coefficient of Kinetic Friction [tex]= 0.01[/tex]
g(gravitational force) [tex]= 9.8 m/s^2[/tex]
Initial Velocity(u) [tex]= 30[/tex] × [tex]1000/3600 m/s[/tex]
[tex]= 8.33 m/s[/tex]
Now by employing the provided values,
[tex]F =[/tex] μ[tex]mg[/tex]
[tex]= (0.01) (50) (9.8)[/tex]
[tex]= 4.9[/tex]
∵ [tex]F = 4.9 N[/tex]
By using the above expression, we will find the distance;
[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]
⇒ [tex]1/2 (50) (0)^2 - 1/2 (50) (8.33)^2 = -4.9(S)[/tex]
⇒ [tex]1734.7225 = 4.9S[/tex]
⇒ [tex]S = 1734.7225/4.9[/tex]
∵ [tex]S = 354 m[/tex]
Because [tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex] [tex]= -[/tex] μmgS
⇒ [tex]S = (u^2 - v^2)[/tex]/2μ[tex]g[/tex]
Thus, the distance will remain unaffected by the sliding friction i.e. 354m
Learn more about "Friction" here:
brainly.com/question/2122951
A permanent magnet is pushed into a wire, left there for a while, and then pulled out. During which time does a current run though the wire? A from the time that the magnet is pushed into the coil to the time it is pulled out B while the magnet remains within the coil C while the magnet is moving D only while the magnet is being pulled out of the coil
Answer:
C. while the magnet is moving
Explanation:
Electromagnetic induction implies the production of electric current by mere movement of a magnet with respect to a coil or wire.
In the given question, current would be induced in the wire only when the magnet moves. That is either when the magnet is pushed into a wire, or when pulled out. But no current would flow through the wire when the magnet is left there for a while.
The current is induced because of the motion involved. Thus, the appropriate option is C.
We say that evaporation is a cooling process. (a) What cools and what warms? We say that condensation is a warming process. (b) What warms and what cools?
Answer:
a liquid warms gas cools
b solid piece warms and liquid cools
the oscillation of pendulum is ...... motion
Answer:
A simple pendulum consists of a ball (point-mass) m hanging from a (massless) string of length L and fixed at a pivot point P. When displaced to an initial angle and released, the pendulum will swing back and forth with periodic motion.
An elevator lifts a mass=200kg a distance of 20m in 15s. What power does the elevator motor produce? *
A) 20000J
B) 20000W
C) 2666W
D) 600000W
show your work please
Answer:
C. 2666W
Explanation:
m =200kg
h =20m
t =15s
g =10ms^-2
p = mgt/t
=200×20×10/15
=40,000/15
=2666.6
≈2666W
A 5.0-kg solid cylinder of radius 0.25 mis free to rotate about an axle that runs along the cylinders length and passes through its center. A thread wrapped around the cylinder is weighed down by a mass of 2.0 kg so as to unwrap and make the cylinder rotate as this mass falls. Ignore any friction in the axle. If there is no slippage between the thread and the cylinder, and the cylinder starts from rest (a) Calculate the velocity of the block after it has fallen a distance of 2.0m. Give your answer in m.s (b) Calculate the total work done by the rope on the cylinder after the block has fallen a distance of 2.0 m. Give your answer in Joule.
Answer:
157n is the correct answer
What is the direction of a vector with an x component of -12 m and a y component of -15 m?
Answer:
[tex]51.34^{\circ}[/tex]
Explanation:
Given that,
x component of a vector = -12 m
The y component of a vector = -15 m
We need to find the direction of a vector. The direction of a vector is given by :
[tex]\tan\theta=\dfrac{y}{x}[/tex]
Put all the values,
[tex]\tan\theta=\dfrac{-15}{-12}\\\\\theta=\tan^{-1}(\dfrac{-15}{-12})\\\\\theta=51.34^{\circ}[/tex]
So, the direction of vector is [tex]51.34^{\circ}[/tex] to x component.
Mary applies a force of 73 N to push a box with an acceleration of 0.48 m/s^2. When she increases the pushing force to 84 N, the box's acceleration changes to 0.64 m/s^2. There is a constant friction force present between the floor and the box.
Required:
a. What is the mass of the box?
b. What is the coefficient of kinetic friction between the floor and the box?
Answer: [tex]68.75\ kg, 0.06[/tex]
Explanation:
Mary applies a force of 73 N to create an acceleration of [tex]0.48\ m/s^2[/tex]
When She increases force to 84 N, it creates an acceleration of [tex]0.64\ m/s^2[/tex]
Friction opposes the motion of box
[tex]\Rightarrow 73-f=m\times 0.48\quad \ldots(i)\\\Rightarrow 84-f=m\times 0.64\quad \ldots(ii)[/tex]
Subtract (i) from (ii)
[tex]\Rightarrow 11=m(0.64-0.48)\\\Rightarrow m=68.75\ kg[/tex]
Therefore friction is
[tex]\Rightarrow f=73-68.75\times 0.48\\\Rightarrow f=73-33\\\Rightarrow f=40\ N[/tex]
Here, friction is kinetic friction which is given by
[tex]\Rightarrow f=\mu_kmg\\\Rightarrow 40=\mu_k 68.75\times 9.8\\\Rightarrow \mu_k=0.061[/tex]
A 0.277 kg bat is flying 4.25 m/s.
It then doubles its velocity.
How much KE did it gain?
Answer:
7.51
Explanation:
The mass of the bat is given to us as:
m = 0.277 kg
,
and its initial velocity is:
v
i = 4.25 m/s
When the velocity is doubled, the new value becomes:
v f = 4.25 m/s × 2 = 8.5 m/s
.
The formula for kinetic energy is:
K
=
1
2
m
v
2
.
The change in kinetic energy is:
Δ K = 1 /2( m ) ( v2 f − v 2 i ) = 1 2 ( 0.277)
10-2.5=7.5J
7.51 J
.
The bat gained 7.51 joules.
Una persona en la tierra tiene una masa de 70[kg]. Calcule: a) Su fuerza peso en la tierra. b) Su fuerza peso en la luna (considere que la aceleración gravitatoria en la luna es de 1.62 [m/s²]) *
Answer:
a. El peso = 686 Newton
b. El peso = 113.4 Newton
Explanation:
Dados los siguientes datos;
Masa = 70 kg
Aceleración debida a la gravedad en la luna = 1,62 m/s² una.
a. Para encontrar la fuerza-peso en la Tierra;
Sabemos que la aceleración debida a la gravedad es igual a 9,8 m/s² en el planeta Tierra.
El peso se puede definir como la fuerza que actúa sobre un cuerpo o un objeto como resultado de la gravedad.
Matemáticamente, el peso de un objeto viene dado por la fórmula;
[tex] Peso = mg [/tex]
Dónde;
m es la masa del objeto.
g es la aceleración debida a la gravedad.
Substituting into the formula, we have;
El peso = 70 * 9.8
El peso = 686 Newton
b. To find weight on moon;
Weight = mass * acceleration due to gravity on moon
Weight = 70 * 1.62
Weight = 113.4 Newton
.Use Newton's third law to describe the forces that are exerted by the falling egg and the ground. Explain how the use of the straws in the design affects the forces
Answer:
Newton's third law states that for every action, there is an equal and opposite reaction. That means when you exert a force on an object, the object exerts a force back on you. ... Using shock-absorbing materials can help reduce the amount of force exchanged between the ground and the egg.
Explanation:
I hope it helps you
When one of the tall straws hits the ground, the energy is transferred to the center of the pyramid and then to the egg, but as the middle straw is connected to the outer surface of the egg, energy enters trying to make the egg rotate. This is governed by Newton's third law.
What is Newton's third law?If an object exerts a force on another object, then another object must exert a force of equal magnitude and opposite direction back on first object.
What are examples of Newton's third law?Examples of Newton's third law are:
A swimmer moves forward by pushing off the side of pool. This way, the wall pushes in opposite direction and giving acceleration.
Another example is rockets move forward by expelling gas backward at high velocity. This means the rocket exerts a large backward force on the gas in the rocket combustion chamber, and the gas therefore exerts a large reaction force forward on the rocket. This reaction force is called thrust.
Helicopters similarly create lift by pushing air down, thereby experiencing an upward reaction force. Birds and airplanes also fly by exerting force on air in a direction opposite to that of whatever force they need. For example, the wings of a bird force air downward and backward in order to get lift and forward motion.
To learn more about Newton's third law here
https://brainly.com/question/974124
#SPJ2
A pitcher throws a curveball that reaches the catcher in 0.61 s. The ball curves because it is spinning at an average angular velocity of 350 rev/min (assumed constant) on its way to the catcher's mitt. What is the angular displacement of the baseball (in radians) as it travels from the pitcher to the catcher
Answer:
22.36 rad
Explanation:
Applying,
ω = θ/t.............. Equation 1
Where ω = angular velocity, θ = angular displacement of the baseball, t = time
make θ the subject of the equation
θ = ωt............... Equation 2
From the question,
Given: ω = 350 rev/min = 350(0.10472) = 36.652 rad/s, t = 0.61 s
Substitute these values into equation 1
θ = 0.61(36.652)
θ = 22.36 rad
Hence the angular displacement of the baseball is 22.36 rad
HELP PLSS I CANT FAIL!!!
Elements from Period 3 of the periodic table are highlighted. Which element
is a metalloid?
A. Sodium
B. Argon
C. Sulfur
D. Silicon
HELP ME PLSSSS!!!!!!!
Which statement describes why the viscosity of olive oil is higher than that of
rubbing alcohol?
A. The molecules that make up olive oil are longer than those that
make up alcohol, so they have more resistance to sliding past one
another.
B. The molecules that make up olive oil repel one another, while the
molecules that make up alcohol are attracted to one another.
C. The molecules that make up olive oil are shorter than those that
make up alcohol, so they have more resistance to sliding past one
another.
D. The molecules that make up olive oil are attracted to one another,
while the molecules that make up alcohol repel one another.
Answer:B
Explanation: The answer explains it
The molecules that make up olive oil are longer than those that make up alcohol, so they have more resistance to sliding past one another. The correct answer is option A.
This higher resistance to flow leads to a higher viscosity in olive oil compared to rubbing alcohol. Viscosity is a measure of a fluid's resistance to flow, and longer molecules in olive oil result in stronger intermolecular forces and entanglements. In contrast, rubbing alcohol has shorter and less complex molecules, which allow them to move more freely and exhibit lower viscosity. The molecular structure and intermolecular forces play a crucial role in determining the viscosity of liquids, making olive oil more viscous than rubbing alcohol. Option A is correct.
To know more about rubbing alcohol, here
brainly.com/question/10846317
#SPJ2
A man pulls his dog (m=20kg) on a sled with a force of 100N at a 60° angle from the horizontal. What is the horizontal component of the force?
A) 100N
B) 196N
C) 50N
D) 86N
show your work please
Answer:
the horizontal component of the force is 50 N
Explanation:
Given;
force applied by the man, F = 100 N
angle of inclination of the force, θ = 60⁰
mass of the dog, m = 20 kg
The horizontal component of the force is calculated as;
[tex]F_x = F\times cos(\theta)\\\\F_x = 100 \ N \times cos(60^0)\\\\F_x = 100\ N \times 0.5\\\\F_x = 50 \ N[/tex]
Therefore, the horizontal component of the force is 50 N
QUESTION 24
2 point
A man travels 40 km eastwards, then 40 km to the south before finally travelling
10 km west. At the end of his journey the magnitude of his displacement is