which of the following elements is the most difficult to ionize? select the correct answer below: fr h he xe

The pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI is approximately 5.676.

What is pH?

To find the pH of the solution, we need to first determine if (CH3)3NHCI acts as an acid or base. Since (CH3)3NHCI is a salt composed of a weak base, trimethylamine, and a strong acid, hydrochloric acid (HCI), it will undergo hydrolysis in water.

The hydrolysis reaction is given by:

(CH3)3NH+ (aq) + H2O (l) ⇌ (CH3)3N (aq) + H3O+ (aq)

The Kb expression for the equilibrium reaction is:

Kb = [ (CH3)3N ] [ H3O+ ] / [ (CH3)3NH+ ]

Since (CH3)3NH+ and HCl dissociate completely in water, the initial concentration of (CH3)3NH+ is equal to the concentration of (CH3)3NHCI, which is 0.335 M.

Using the Kb value given, we can solve for the concentration of H3O+:

Kb = 6.3 x [tex]10^{-5}[/tex] = [ (CH3)3N ] [ H3O+ ] / 0.335

[ H3O+ ] = Kb x (CH3)3NH+ / (CH3)3N

[ H3O+ ] = 6.3 x [tex]10^{-5}[/tex] x 0.335 / 1

[ H3O+ ] = 2.1095 x [tex]10^{-6}[/tex] M

Finally, we can calculate the pH using the expression:

pH = -log [H3O+]

pH = -log (2.1095 x [tex]10^{-6}[/tex])

pH = 5.676

Therefore, the pH of the solution is approximately 5.676.

To know more about pH, visit:

https://brainly.com/question/15289741

#SPJ1

Complete question is: The pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI is approximately 5.676.

Answer:

B. 6

Explanation:

chatgpt

coursehero

carbon atom has six protons, six neutrons, and six electrons.

The correct answer is c. Single-Replacement.

Synthesis and Decomposition reactions can be reversible, meaning they can proceed in both the forward and reverse directions, whereas Single-Replacement reactions are typically irreversible, meaning they only proceed in one direction.

What is Decomposition?

This process is usually initiated by the addition of energy in the form of heat, light, or electricity, or by the action of a catalyst.

During a decomposition reaction, the original compound is broken down into its constituent parts, which can include elements, smaller molecules, or ions. For example, the decomposition of water (H2O) can produce hydrogen gas (H2) and oxygen gas (O2):

2H2O → 2H2 + O2

In a Single-Replacement reaction, one element replaces another element in a compound, forming a new compound and releasing a free element. This type of reaction is typically irreversible because once the replacement has occurred, it is difficult or impossible to reverse the process and put the original elements back together.

Learn more about Decomposition from given link

https://brainly.com/question/14608831

#SPJ1

To convert the volume of Substance A to the volume of Substance B at STP, you can use the principle of molar volume, which states that one mole of any gas at standard temperature and pressure (STP) occupies a volume of 22.4 liters. Here are the steps:

Determine the number of moles of Substance A using its volume and molar volume at STP:

Number of moles of Substance A = Volume of Substance A / Molar volume at STP (22.4 L)

STP stands for "Standard Temperature and Pressure," which is a set of standard conditions used for measuring and comparing physical and chemical properties of gases.

The standard temperature is typically defined as 0 degrees Celsius (273.15 Kelvin), while the standard pressure is typically defined as 1 atmosphere (atm) or 101.325 kilopascals (kPa). At STP, one mole of any gas occupies a volume of 22.4 liters.

STP is commonly used in chemistry and physics to compare gas volumes, to determine molar masses, and to calculate other properties of gases. It is also useful for converting between different units of gas volume, pressure, and temperature.

To know more about STP visit :

https://brainly.com/question/29356493

#SPJ1

However, it is commonly approximated as 3.14159.

An irrational number is a number that cannot be expressed as a simple fraction or ratio of two integers. It is a non-repeating, non-terminating decimal. Examples of irrational numbers include pi (π), the square root of 2 (√2), and the golden ratio (∅).

In mathematics, a terminating decimal is a decimal number that has a finite number of digits after the decimal point, i.e., the decimal representation ends in a finite number of zeroes. For example, 0.75, 2.0, and 0.0625 are terminating decimals.

To know more about irrational visit :

https://brainly.com/question/15837135

#SPJ1

The statement that is TRUE is: "Vinegar is moderate to highly acidic."

Vinegar has a pH of about 2-3, which indicates that it is an acidic substance. pH scale ranges from 0 to 14, where pH 0 is the most acidic.

Vinegar is a liquid consisting mainly of acetic acid and water. It is typically made through a fermentation process where sugar is first converted to alcohol by yeast and then further oxidized to acetic acid by bacteria.

Vinegar has been used for thousands of years as a condiment, preservative, and for medicinal purposes. It is commonly used in cooking, food preservation, and as a cleaning agent. Different types of vinegar can be made from various sources such as grapes, apples, rice, malted barley, and many others, and each type has a unique flavor and acidity level. Some popular types of vinegar include white vinegar, red wine vinegar, apple cider vinegar, and balsamic vinegar.

To know more about Vinegar visit :

https://brainly.com/question/15934865

#SPJ1

A)The number of moles of copper in the penny is 0.048 moles.

B)the mass of the undissolved penny is also 3.067 g.

C)the molarity of the Cu2+ ion in the solution is 0.192 M.

A. In order to calculate the number of moles of copper in the penny, we can use the following formula: moles of copper = mass (g) / molar mass (g/mol). The mass of the penny is 3.067 g and the molar mass of copper is 63.55 g/mol, so the number of moles of copper in the penny is 0.048 moles.

B. The undissolved penny is removed when the reaction stops. Since the mass of the penny is 3.067 g, the mass of the undissolved penny is also 3.067 g.

C. The molarity of the Cu2+ ion in the solution can be calculated using the following formula: molarity = moles of Cu2+ / volume of solution (L). The number of moles of Cu2+ is 0.048 moles, and the volume of the solution is 0.250 L, so the molarity of the Cu2+ ion in the solution is 0.192 M.

For more such questions on molarity

https://brainly.com/question/14469428

#SPJ11

The chemical equation C6H12O6 → 6C + 6H2 + 3O2 states that 6 moles of Carbon (C) are produced when 1 mole of C6H12O6 is reacted. So the correct answer is A)6 moles

This can be determined by using the mole ratios from the equation. The mole ratios show the amount of each substance that is used in the reaction and the amount that is produced. The equation states that for every 1 mole of C6H12O6, 6 moles of Carbon (C) are produced.
To determine the amount of Carbon produced, the mole ratio of Carbon can be used. In this case, the mole ratio is 6:1, meaning that 6 moles of Carbon are produced for every 1 mole of C6H12O6. This means that the answer to the question is 6 moles of Carbon.
In conclusion, the answer to the question "How many moles of carbon are produced?" is 6 moles of Carbon. This answer can be determined by using the mole ratios from the chemical equation C6H12O6 → 6C + 6H2 + 3O2, which states that for every 1 mole of C6H12O6, 6 moles of Carbon are produced. So the correct answer is A)6 moles

for more such questions on Carbon

https://brainly.com/question/27860158

#SPJ11

The given chemical equation represents a reversible reaction in which two molecules of sulfur trioxide (SO₃) react to form two molecules of sulfur dioxide (SO₂) and one molecule of oxygen gas (O₂).

The problem states that a 1-liter flask contains 0.50 moles of SO₃, 0.20 moles of SO₂, and 0.30 moles of O₂. These three substances react with each other to reach equilibrium, which can be determined using the equilibrium constant (Kc).

At equilibrium, the concentration of oxygen gas (O₂) is given as 0.52 M. This information can be used to calculate the concentrations of sulfur trioxide (SO₃) and sulfur dioxide (SO₂) at equilibrium using the equilibrium constant (Kc) and the initial concentrations of the reactants.

Using the given equation for the equilibrium constant and the initial concentrations of the reactants, we can write:

Kc = [SO₂]²[O₂] / [SO₃]²

Substituting the given values, we get:

59 = [0.20 mol/L]² (0.52 mol/L) / [0.50 mol/L]²

Solving for SO₃], we get:

[SO₃] = [tex]\sqrt{[(0.20 mol/L)² (0.52 mol/L) / 59] }[/tex]= 0.10 mol/L

Similarly, solving for [SO₂], we get:

[SO₂] = 2 [SO₃] = 0.20 mol/L

Therefore, at equilibrium, the concentrations of SO₃, SO₂, and O₂are 0.10 M, 0.20 M, and 0.52 M, respectively. This means that the reaction has favored the production of SO₂and O₂ over the reactant SO₃ at equilibrium.

To know more about equlibrium concentration, visit:

https://brainly.com/question/14050616

#SPJ1

The empirical formula, CH2O9(menthol) is multiplied by 5 to get the molecular formula, C10H20O.The empirical and molecular formula for menthol are CH2O and C10H20O, respectively.

The molecular formula for menthol is C5H10O.

This can be determined by dividing the molar mass of the empirical formula (156.26 g/mol) by the molar mass of CO2 (44.01 g/mol). This gives a ratio of 3.55, which is equal to the ratio of C atoms in the empirical formula, C10H20O.

Therefore, the molecular formula is C5H10O.
Given:

Menthol is composed of C, H, and O0.1005g sample of menthol is combusted and produces0.2829g of CO2 0.1159g H2O

1. Find: Empirical and molecular formula for menthol.

Let's first calculate the number of moles of CO2 produced. The balanced equation for combustion of menthol is:

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the above equation, we can see that for 10 moles of CO2 produced 1 mole of menthol is required.

2. By taking the number of moles of CO2 produced, we can calculate the number of moles of menthol burned.

Moles of CO2 = 0.2829g / 44.01g/mol= 0.00643 mol

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the balanced equation,1 mole of C10H20O requires 10 moles of CO2

Moles of C10H20O burned = 10 * 0.00643= 0.0643 mol

Next, we can calculate the number of moles of H2O produced.

Moles of H2O = 0.1159g / 18.015g/mol= 0.00643 mol

C10H20O(s) + 12O2(g) → 10CO2(g) + 10H2O(l)

From the balanced equation,1 mole of C10H20O requires 10 moles of H2O

Moles of C10H20O burned = 10 * 0.00643= 0.0643 mol

3. Now we can calculate the empirical formula of menthol. The empirical formula can be calculated as follows:

Empirical formula = CH2O (Divide all moles by smallest moles) The molecular weight of CH2O = 30 g/mol

The empirical formula mass of the compound is:

mass = (12.011 + 2*1.008 + 15.999) = 30.026

Empirical formula mass of CH2O is 30.026g/mol, and the given sample weighs 0.1005 g.
The number of empirical formula units in the sample is 0.1005 g / 30.026 g/mol = 0.003348Units.

Empirical formula = CH2OThe empirical formula weight of menthol is CH2O, which is equal to 30.026g/mol.

4. To find the molecular formula, we need to know the molecular weight of the menthol. We can calculate it as follows:

Molecular formula mass = Empirical formula mass x n

Where n = integer Molecular formula mass of menthol is 156 g/mol, and the empirical formula mass is 30.026 g/mol.

So, n = 156 g/mol ÷ 30.026 g/mol = 5.192

Thus the empirical formula, CH2O is multiplied by 5 to get the molecular formula, C10H20O.The empirical and molecular formula for menthol are CH2O and C10H20O, respectively.

For more such questions on empirical formula , Visit:

https://brainly.com/question/1603500

#SPJ11

The element in question here is E, and its chemical formula with oxygen is EO2.  the electronic configuration of the ion formed from E in EO2 is 1s²2s²2p⁶.

Electronic configuration refers to the distribution of electrons among different energy levels and subshells of an atom. When E forms a compound with oxygen, it loses two electrons to form a cation with a 2+ charge. This cation is written as E2+ and has an electronic configuration of 1s²2s²2p⁶. The electronic configuration of E before it forms a compound with oxygen can be found by considering its position in the periodic table. E is in the third row and fourth column of the periodic table, which means that it has three energy levels and four valence electrons.

Therefore, its electronic configuration is 1s²2s²2p⁶3s²3p². When E forms a compound with oxygen, it loses two valence electrons from its outermost energy level, which is the third energy level in this case. This results in the formation of E2+ ions with an electronic configuration of 1s²2s²2p⁶. Thus, the electronic configuration of the ion formed from E in EO2 is 1s²2s²2p⁶.

Know more about electronic configuration here:

https://brainly.com/question/29564763

#SPJ11

The mass (in kilograms) of Cryolite, Na₃AlF₆ produced, given that 10.3 Kg of Al₂O₃, 55.4 Kg of NaOH, and 55.4 Kg of HF react completely is 42.4 Kg

The mass of Na₃AlF₆ produced from the reaction can be obtained as follow:

Al₂O₃(s) + 6NaOH(l) + 12HF(g) ⟶ 2Na₃AlF₆ + 9H₂O(g

From the balanced equation above,

0.102 Kg of Al₂O₃ reacted to produce 0.420 Kg of Na₃AlF₆

Therefore,

10.3 Kg of Al₂O₃ will react to produce = (10.3 × 0.420) / 0.102 = 42.4 Kg of Na₃AlF₆

Thus, from the above calculation, it is evident that the mass of Na₃AlF₆ produced is 42.4 Kg

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as  either an atom or a lone pair of electrons. The correct option is (E).

In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as a combination of atoms and/or lone pairs of electrons. An atom is a single atom, and a lone pair of electrons is two electrons that form a pair. A valence electron is a single electron in an atom's outermost shell, and therefore it cannot form a group on its own.
In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as either an atom or a lone pair of electrons.

The valence shell electron pair repulsion (VSEPR) theory is a model in chemistry that is used to forecast the geometry of different molecules. It is based on the idea that the atoms and lone pairs in the outer shell of a molecule are repelled by one another, and so move as far away from each other as possible. This rule is used to determine the 3D geometry of a molecule.

In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as either an atom or a lone pair of electrons. The VSEPR theory considers that the most stable molecular structure is one that has the least amount of electron pair repulsion among its valence electrons. VSEPR theory gives us a clue about the geometry of the molecule. The molecular geometry of the molecule is determined by the electron groups, whether they are bonding electrons or lone pair electrons.

For instance, if there are three electron groups on a central atom, it would adopt a trigonal planar geometry. So, The correct option is (E).

For more such questions on (VSEPR) theory , Visit:

https://brainly.com/question/10271048

#SPJ11

Answer:

Democritus of Abdera

Explanation:

Leucippus of Miletus (5th century bce) is thought to have originated the atomic philosophy. His famous disciple, Democritus of Abdera, named the building blocks of matter atomos, meaning literally “indivisible,” about 430 bce.

At 769 K, the rate constant equals 2.22 1/min.

The final expression is either k=A or k=A. This implies that the response rate will be equal to the value of the collision frequency rather than the temperature when the activation energy is zero.

The Arrhenius equation, which connects the rate constant (k) to the activation energy (Ea) and temperature (T), can be used to solve this issue:

[tex]A = * exp (-Ea / (R * T))[/tex]

With the rate constant (k) at 475 K, we can utilize this knowledge to calculate the pre-exponential factor (A) as follows:

0.0450 1/min = A * exp(-13.6 kJ/mol / (8.314 J/mol•K * 475 K))

[tex]A = 5.74 x 10^9 min^-1[/tex]

The rate constant (k) at 769 K can now be calculated using the Arrhenius equation once more as follows:

[tex]k = 5.74 x 10^9 min^-1[/tex] * exp(-13.6 kJ/mol / (8.314 J/mol•K * 769 K))

k = 2.22 1/min (rounded to two significant figures)

To know more about rate constant visit:-

https://brainly.com/question/20305871

#SWPJ1

Taking into account definition of reaction stoichiometry, 3.67 grams of N₂ are produced from the reaction of 8.92 g of H₂O₂ and 5.53 g of N₂H₄.

The balanced reaction is:

2 H₂O₂ + N₂H₄ → 4 H₂O + N₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The limiting reactant is the reactant that in a chemical reaction determines, discloses or limits the amount of product formed, and causes a specific or limiting concentration; that is, it is the reactant that produces the least amount of product.

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 32 grams of N₂H₄ reacts with 68 grams of H₂O₂, 5.53 grams of N₂H₄ reacts with how much mass of H₂O₂?

mass of H₂O₂= (5.53 grams of N₂H₄×68 grams of K)÷32 grams of N₂H₄

mass of H₂O₂= 11.75 grams

But 11.75 grams of H₂O₂ are not available, 8.92 grams are available. Since you have less mass than you need to react with 5.53 grams of N₂H₄, H₂O₂ will be the limiting reagent.

Considering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 68 grams of H₂O₂ form 28 grams of N₂, 8.92 grams of H₂O₂ form how much mass of N₂?

mass of N₂= (8.92 grams of H₂O₂× 28 grams of N₂)÷68 grams of H₂O₂

mass of N₂= 3.67 grams

Finally, 3.67 grams of N₂ can be produced.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

Answer:

Ca is a reducing agent and O is the oxidizing agent.

Explanation:

calcium is the reducing agent as it reduces oxygen while it oxidize itself and oxygen is an oxidising agent because it oxidized others and reduces itself. in this equation oxygen is reducing and Calcium is oxidising. and as it is stated in the definition that oxidizing agent is the agent which oxidises others and reduces itself and it is also stated that reducing agent reduces others and oxidize itself. so based on this statement calcium is reducing agent and O is a oxidizing agent.

Answer:

Claim: Some species of crabs possess visual abilities that enable them to detect the movement of plankton in the water column, while others may rely more heavily on chemical cues and behavior to locate their prey.

Evidence: Studies have shown that certain species of crabs have eyes with adaptations that enhance their sensitivity to low light levels and allow them to detect small particles, such as plankton, in the water column. Other research has suggested that crabs also use chemical cues and behavior to locate their prey, such as creating small currents to direct plankton toward their mouthparts.

Reasoning: The ability of crabs to see the plankton they eat near the ocean floor is likely influenced by multiple factors, including visual acuity, chemical cues, and behavior. While some species of crabs may have visual capabilities that aid in the detection of plankton, it is unlikely that their vision is the sole determining factor in their feeding behavior. Rather, it is reasonable to conclude that crabs use a combination of senses and behaviors to locate and capture their prey.

In summary, the available evidence suggests that while crabs can see the plankton they eat near the ocean floor, the extent to which they rely on vision to locate their prey varies depending on the species and habitat in which they reside. Other factors, such as chemical cues and behavior, likely play an important role in the feeding behavior of crabs.

The number of moles of A will decrease. This causes a decrease in pressure which will lead to a shift in equilibrium towards reactants.

Addition of A: The addition of A will cause the equilibrium to shift forward. This is because A is added to the reactants side, so the number of moles of A will increase. This causes an increase in pressure which will lead to a shift in equilibrium toward products. Addition of B: The addition of B will cause the equilibrium to reverse. This is because B is added to the product side, so the number of moles of B will increase. This causes an increase in pressure which will lead to a shift in equilibrium towards reactants. Removal of C: The removal of C will cause no shift in equilibrium. This is because C is removed from the reactants side, but the number of moles of C will remain unchanged. Removal of D: The removal of D will cause no shift in equilibrium. This is because D is removed from the product side, but the number of moles of D will remain unchanged.

Addition of E: The addition of E will cause the equilibrium to shift forward. This is because E is added to the product side, so the number of moles of E will increase. This causes an increase in pressure which will lead to a shift in equilibrium toward products. Removal of A: The removal of A will cause the equilibrium to reverse. This is because A is removed from the reactant's side.

To learn more about Equilibrium ;

https://brainly.com/question/19340344

#SPJ11

When dissolved in water to make a 0.10 M solution, the potassium salt of a strong acid would produce the highest pH of the available alternatives.

A potassium base and an acid react to generate the chemical known as the potassium salt. It is a form of salt, an ionic compound made up of negatively and positively charged ions known as anions and cations, respectively. Potassium salts are useful in a variety of industries, such as fertilisers, pharmaceuticals, and food processing. They are frequently utilised as sources of alkali metal in different chemical reactions or as supplements to give plants and animals more potassium. Depending on the exact acid and base that were used to create the salt, the properties of potassium salts can change, and the resulting salt can have distinct physical and chemical properties.

Learn more about the potassium salt here:

https://brainly.com/question/14385113

#SPJ4

The percent dissociation of acetic acid (CH,CO,H) in a 0.60 mM aqueous solution is 98.38%.

When 0.60 mM of acetic acid (CH3COOH) is dissolved in water, it dissociates according to the following equation:

CH3COOH(aq) ↔ H+(aq) + CH3COO-(aq)

The percent dissociation of acetic acid (CH3COOH) in the aqueous solution is calculated using the following equation:

% dissociation = [H+]/[CH3COOH] × 100

where [H+] is the concentration of the hydrogen ion and [CH3COOH] is the concentration of the acetic acid.

1. To calculate the concentration of the hydrogen ion in the solution, we need to use the equilibrium constant expression for the dissociation of acetic acid, which is:

Ka = [H+][CH3COO-]/[CH3COOH]

where Ka is the acid dissociation constant for acetic acid.

2. To calculate the concentration of the hydrogen ion in the solution, we need to use the quadratic formula, since the dissociation of acetic acid is incomplete:

% dissociation = (1 - α) × 100

where α is the degree of dissociation of acetic acid.

Since α is small, we can assume that the change in the concentration of acetic acid is negligible.

Thus,[H+] = α[CH3COOH]

3. Substituting the values, we get:

Ka = [H+][CH3COO-]/[CH3COOH][H+] = Ka × [CH3COOH]/[CH3COO-]α = [H+]/[CH3COOH] = Ka × [CH3COOH]/([CH3COOH] + [CH3COO-])α

= (1.74 × 10-5) × (0.60 × 10-3)/(0.60 × 10-3 + 0.64 × 10-3)α

= 0.0162% dissociation

= (1 - α) × 100% dissociation

= (1 - 0.0162) × 100% dissociation

= 98.38%

The percent dissociation of acetic acid (CH3COOH) in the aqueous solution is 98.38%.

For more such questions on dissociation , Visit:

https://brainly.com/question/9396848

#SPJ11

a. -813.4 kJ.  enthalpy of the reaction is -813.4 kJ

One of the characteristics of a thermodynamic system is enthalpy, which is calculated by multiplying the internal energy of the system by the sum of its pressure and volume. The total enthalpy of a system cannot be directly calculated because the internal energy's components are either unknown, hard to access, or unimportant to thermodynamics.The overall reaction can be represented as: [tex]Ca(s) +\frac{ 1}{2}O_2(g) + CO2(g) \rightarrow CaCO_3(s).[/tex]

The reaction enthalpy [tex](\Delta H_{rxn})[/tex]is the result of adding the reaction's separate enthalpies.The enthalpy of each of the individual reactions is given as:

[tex]Ca(s) + \frac{1}{2}0_2(g) \rightarrow Cao(s) \Delta H_{rxn} = -635.1 kJ CaCO_3(s) \rightarrow Cao(s) + CO2(g) \Delta H_{rxn} = 178.3 kJ[/tex]

Therefore, the overall enthalpy change for the reaction is given as:

[tex]\Delta H_{rxn} = \Delta H_{rxn}(Ca(s) +\frac{ 1}{2}0_2(g) \rightarrow Cao(s)) +\Delta H_{rxn} (CaCO_3(s) \rightarrow Cao(s) + CO2(g))[/tex]

[tex]\Delta H_{rxn} = -635.1 kJ + 178.3 kJ \Delta H_{rxn} = -813.4 kJ[/tex]

Therefore,The reaction's enthalpy is -813.4 kJ.

learn more about enthalpy Refer:brainly.com/question/13996238

#SPJ1

complete question:Calculate delta Hrxn for Ca(s) + 1/202(g) + CO2(g) => CaCO3(s) given the following set of reactions:  Ca(s) + 1/202(g) => Cao(s) delta Hrxn = -635.1 kJ CaCO3(s) => Cao(s) + CO2(g) delta Hrxn = 178.3 kJ  a. -813.4 kJ  

b. -456.8 kJ

c. 813.4 kJ

d 456.8 kJ

e. None of these is within 5% of the correct answer.

The maximum number of electrons that can occupy the 1s sub-shell is 2, the 3p sub-shell is 6, the 3d sub-shell is 10, and the 6g sub-shell is 32.

For the 1s sub-shell, due to the Pauli Exclusion Principle, two electrons of opposite spin can exist in the same orbital. This means that there is a maximum of two electrons that can occupy the 1s sub-shell. For the 3p sub-shell, three orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of six electrons that can occupy the 3p sub-shell. For the 3d sub-shell, five orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of 10 electrons that can occupy the 3d sub-shell. Finally, for the 6g sub-shell, seven orbitals exist with a maximum of two electrons each. Since two electrons of opposite spin can occupy each orbital, there is a maximum of 32 electrons that can occupy the 6g sub-shell.

To learn more about Electrons ;

https://brainly.com/question/11316046

#SPJ11

The volume of the container is approximately 6.03 L if the oxygen gas is at room temperature and pressure.

What is pressure ?

Pressure is a physical quantity that measures the force exerted per unit area. It is a measure of how much force is distributed over a certain area. Pressure is important in many areas of science and engineering, including fluid mechanics, thermodynamics, and materials science.

At standard temperature and pressure (STP), which is commonly defined as a temperature of 0°C (273.15 K) and a pressure of 1 atm (101.3 kPa), the molar volume of any ideal gas is 22.4 L/mol. However, in this problem, we are given the amount of gas in moles and not at STP, so we need to use the ideal gas law to solve for the volume.

The ideal gas law is given by the equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin.

We are given that the container holds 0.25 moles of oxygen gas. The temperature is not specified, but we are told that the gas is at room temperature, which is typically around 20°C (293.15 K). The pressure is also not specified, but we can assume that it is approximately equal to the standard atmospheric pressure of 1 atm.

Plugging in these values into the ideal gas law equation, we get:

V = (nRT)/P

V = (0.25 mol)(0.08206 L·atm/(mol·K))(293.15 K)/1 atm

V = 6.03 L

Therefore, the volume of the container is approximately 6.03 L if the oxygen gas is at room temperature and pressure.

To know more about Temperature visit :-

https://brainly.com/question/25677592

#SPJ1

Option (d) is correct. Toluene undergo undergo nitration in HNO3/H2SO4 to yield a product mixture with the highest ortho : para ratio. Because toluene has less steric hindrance.

Toluene is defined as a substituted aromatic hydrocarbon. Toluene is a colorless, water-insoluble liquid with the smell associated with paint thinners. Toluene is a mono-substituted benzene derivative consisting of a methyl group attached to a phenyl group. The IUPAC name of toluene is methylbenzene. Steric hindrance is defined as the slowing of chemical reactions due to steric bulk. Steric hindrance manifested in intermolecular reactions whereas discussion of steric effects often focus on intramolecular interactions. It is often exploited to control selectivity such as slowing unwanted side-reactions.

To learn more about Toluene

https://brainly.com/question/8696404

#SPJ4

The complete question is,

Which of the following mono alkyl benzenes undergo nitration in HNO3/H2SO4 to yield a product mixture with the highest ortho : para ratio ?

A. ethylbenzene

B. propyl benzene

C. tert-butylbenzene

D. toluene

The given statement is a correct explanation of why the fulminate ion is less stable and more reactive than the cyanate ion.

The formal charge can be defined as the difference between the number of valence electrons present in the free atom and the number of valence electrons present in the Lewis structure. A stable molecule has the lowest possible formal charge on each atom in its structure. Use formal charge to explain why the fulminate ion is less stable and therefore more reactive than the cyanate ion. The given statement can be explained as follows: When we analyze the formal charge of the fulminate ion, it becomes clear that the formal charge of the fulminate ion is +1 on nitrogen and -1 on two oxygens.

But when the electronegativity values are compared, nitrogen is found to be more electronegative than carbon, thus structures with a negative formal charge on C are stable and structures with a positive formal charge on N are stable. This means that the given octet rule is not obeyed, which leads to the instability of the fulminate ion. Since formal charge distribution is unfavored, this molecule is less stable and therefore more reactive. The resonance structure of the fulminate ion requires more resonance contributors to stabilize the molecule, and it does not obey the octet rule. Thus, it can be concluded that the fulminate ion is unstable mainly because it needs more resonance contributors and the formal charge distribution is unfavored.

To learn more about Fulminate :

https://brainly.com/question/21851188

#SPJ11

Answer:

require less

Explanation:

If the concentration of the NaOH solution is increased from 0.1 M to 0.5 M, then the number of moles of NaOH present in a given volume of solution will increase by a factor of 5. This means that the same volume of 0.5 M NaOH solution will contain 5 times more moles of NaOH than the same volume of 0.1 M NaOH solution.

In a titration, the amount of NaOH solution required to reach the endpoint is determined by the amount of HCl present in the solution being titrated. If the concentration of NaOH is increased, then fewer moles of NaOH will be required to neutralize the same number of moles of HCl.

Therefore, if the concentration of the NaOH solution was increased from 0.1 M to 0.5 M, then the titration would require less NaOH solution for a complete reaction.

The glycolytic intermediate that can be used directly for the synthesis of glycerol-3-phosphate is dihydroxyacetone phosphate (DHAP).

Glycolysis is a metabolic pathway that converts glucose into pyruvate, which can then be used for energy production through cellular respiration. It is a universal pathway that occurs in nearly all living organisms, including both aerobic and anaerobic organisms.

During glycolysis, glucose is converted into two molecules of pyruvate through a series of enzymatic reactions, with the production of ATP and NADH. The process begins with the phosphorylation of glucose by hexokinase to form glucose-6-phosphate, which is then converted into fructose-6-phosphate by the enzyme phosphohexose isomerase. This is followed by a series of reactions that involve the conversion of fructose-6-phosphate into glyceraldehyde-3-phosphate and then into pyruvate.

To know more about glycolysis visit :

https://brainly.com/question/30828407

#SPJ1