Which of the following correctly defines essential amino acids?

All the amino acids are considered essential because we need them to survive.

Amino acids that we cannot find in food sources, so the human body must make them instead.

Amino acids that the human body is unable to produce.

Amino acids that can be stored by the body for a later time of need.

Which is correct^ help!

A thinner peptidoglycan layer might cause the gram positive organism to be pink/red as opposed to the purple like they normally should be.

Gram positive bacteria are basically surrounded by a single thick peptidoglycan cell wall whereas the gram negative bacteria possess a much thinner peptidoglycan cell wall but also these bacteria have an outer membrane which contain lipopolysaccharides that surround the cell.

A Gram stain is basically colored purple. When the stain happens to combine with the bacteria in a particular sample, the bacteria will either stay purple or they will turn to pink or red. If the bacteria happen to stay purple, then they are Gram-positive and if the bacteria turn pink or red, then they are Gram-negative. If the gram positive bacteria turn pink or red in color instead of purple, it means they have a thinner peptidoglycan layer maybe because of mutation or contamination.

To know more about gram stain here

https://brainly.com/question/28727157

#SPJ4

Answer:

Tube feet in echinoderms have a few functions. The obvious one is locomotion. The feet are powered by the water vascular system. They are also important for absorbing oxygen (remember that the body of sea stars and their relatives are covered in bony plates called ossicles), for eliminating nitrogenous waste products of metabolism, and grasping prey. Sea stars are capable of pulling a bivalve apart by exerting pull on the two shells and essentially tiring the prey out as the muscles the prey eventually tire. Once there is an opening, the sea star everts its stomach into the prey.

If you've ever picked up a sea star and turned it over, you probably noticed the hundreds of tube "feet" lining its arms. It is these suction-bottomed tubes that the sea star uses to move about. It draws in water and channels it to canals that run throughout its body, usually ending in the tube feet.

Tube feet function in locomotion, feeding, and respiration. The tube feet in a starfish are arranged in grooves along the arms. They operate through hydraulic pressure. They are used to pass food to the oral mouth at the center, and can attach to surfaces.

Have a wonderful day! :-)

Answer:

it's true

Because the walls of the veins are thinner and less rigid than arteries, veins can hold more blood. Almost 70 per cent of the total blood volume is in the veins at any given time.

Any given area of the retina relays its information to a corresponding location in the visual cortex at the back of your brain.

The retina is a very thin layer at the back of the eyeball that can capture light which is then processed so that humans can see objects clearly. In the retina there are rod cells which receive colorless rod light and cone cells which are capable of receiving strong and colored light rays.

The visual cortex, located in the occipital lobe, is the first to process image impulses received from the retina. There are two visual cortices, namely the primary visual cortex and the extraestriated cortex. The information we receive from the eyes to the visual cortex is passed on until it finally reaches the cerebral cortex to be processed so that we can recognize colors, shapes, and movements.

Learn more occipital lobe at:

https://brainly.com/question/30418197

#SPJ4

Ribosomes are the ribonucleoprotein units in charge of protein synthesis and read messenger RNA to convert it into a polypeptide chain. They contain three binding sites for tRNA molecules: A, P, and E. When translation is finished, the newly created protein is released.

Ribosomes are protein- and ribosomal RNA-containing tiny cellular organelles (rRNA). They are in charge of generating proteins from messenger RNA (mRNA) molecules. Ribosomes are found in both bacterial and eukaryotic cells and are required for cell activity.

The ribosomes—ribonucleoprotein units that are responsible for protein synthesis—are where translation takes place. The messenger RNA (mRNA) is read by the ribosomes during translation and translated into a series of amino acids that form a polypeptide chain. The three tRNA binding sites on the ribosomes are designated as follows: the A site, which receives incoming aminoacyl-tRNA; the P site, which receives the developing polypeptide chain; and the E site, which receives the deacylated tRNA after it has been used. When the ribosomes advance along the mRNA molecule, they read the codons and add the proper amino acids to the polypeptide chain. At successful completion of translation, the newly created protein is also released by the ribosomes.

To know more about ribosomes, visit

brainly.com/question/241631

#SPJ1

A mutant bacterial cell has a defective aminoacyl-tRNA synthetase that attaches a lysine to tRNA with the anticodon aaa instead of the normal phenylalanine. The potential consequence for a cell is that proteins in the cell will include lysine instead of phenylalanine at amino acid positions specified by the codon UUU.

Bacterial mutants typically have either lost a growth trait (such as the inability to utilize a specific carbon or nitrogen source or the inability to develop without a specific nutrient) or acquired a new growth property (e.g., the ability to grow in the presence of some toxic substance).

The phenotypes of the mutants that correspond to each gene can be used to classify the genes into one of two categories: nonessential genes produce products that are only necessary under certain growth conditions, whereas essential genes produce products that are necessary under all growth conditions.

Want to know more about mutant bacteria visit the link which is given below;

https://brainly.com/question/9456653

#SPJ4

Answer:

A straightforward word condition that can be utilized to depict the procedure of photosynthesis is

Carbon dioxide + water — > Glucose + Oxygen + water.

A fair synthetic condition for the procedure can be composed as

6CO

2

​

 + 6H

2

​

O — > C

6

​

H

12

​

O

6

​

 + 6O

2

​

. Generally, photosynthesis utilizes light to convert Carbon dioxide into Glucose.

Explanation:

Answer: The type of chemical which can be used to cure the unhealthy plant-"Nitrate".

Explanation: It serves plants as a nutrient and is an important growth factor. It is absorbed by the roots from the soil. It helps to build organic compounds including proteins and nucleic acids.

To learn more about "Nitrate"

https://www.ages.at

For Met-ser-leu-gly-trp-stop, mRNA sequence is -AUG-Methionine-Gutamine-Dropmo-GPA.

mRNA sequence or messenger RNA is a single stranded RNA molecule. It is corresponding to the DNA and conveys hereditary data present in the DNA. Framing proteins is deciphered. The hereditary codes (trio) present on mRNA get meant amino acids, leading to the practical result of a quality (proteins).

In eukaryotes, mRNA is combined in the core and in the wake of handling, it gets shipped to the cytoplasm, where interpretation or protein union happens. mRNA sequence gives various benefits over quality articulation exhibits in examining the transcriptome.

To know more about mRNA sequence, visit here:

https://brainly.com/question/26856800

#SPJ4

(Complete question) is:

Write down the mRNA sequence for:

Met-ser-leu-gly-trp-stop

A triplet codon is a DNA or RNA molecule that codes for a specific amino acid through a series of three subsequent nucleotides. Some codons act as start or stop signals for translation.

The triplet code, made up of three nucleotides, identifies a single amino acid.

Here we can see ‘UUG’ codes for LEU

‘GGU’ codes for ‘GLY’

‘UAU’ codes for TYR

What is triplet codon?

It is a particular sequence of three nucleotides that is used as a component of the genetic code to specify an amino acid for a particular protein or to start or stop protein synthesis.

A codon is a group of three nucleotides on a messenger ribonucleic acid (mRNA) that designates one of the 22 amino acids that are capable of forming proteins. The order in which these amino acids appear on the messenger RNA dictates the primary structure of the protein that will be produced.

To learn more about triplet codon from the given link

https://brainly.com/question/12192675

#SPJ1

The internal structures of a tree work together to take in carbon dioxide (CO2) from the air and convert it into glucose through the process of photosynthesis.

During photosynthesis, the chloroplasts in the mesophyll cells of the leaves use energy from sunlight to convert CO2 and water into glucose, releasing oxygen as a byproduct.

The glucose produced during photosynthesis is used by the tree as a source of energy and as a building block for the formation of cellulose, hemicellulose, and lignin, the main components of the cell walls in the tree's trunk, branches, and leaves.

The glucose is transported from the mesophyll cells of the leaves to the other parts of the tree through the phloem, a tissue that functions as a network of tubes for the transport of sugars and other nutrients from the leaves to the rest of the tree.

The cellulose, hemicellulose, and lignin produced by the tree help to reinforce the cell walls, giving the tree its structural integrity. As the tree continues to grow, more glucose is produced and used to build the cell walls, and the tree is able to lock up more and more carbon atoms within its wood.

To learn more about photosynthesis

https://brainly.com/question/29775046

#SPJ4

Answer:

Explanation:

The change in the percentage of light colored moths and dark colored moths between 1850 and 1900 is a result of industrial melanism, a phenomenon in which the frequency of dark-colored individuals increases in a population over time in response to increased levels of pollution and soot. During this period, the population of light colored moths, which were once abundant, began to decline as the dark colored moths, which were previously rare, began to increase in number. This change was due to the increased visibility of the dark colored moths, which were better able to blend in with the dark soot-covered trees and avoid being preyed upon by birds.

Between 1950 and 2000, the trend of industrial melanism continued, but at a slower rate. The dark colored moths remained more numerous than the light colored moths, but the difference between the two populations became less pronounced as environmental regulations reduced the levels of pollution and soot in the environment. The decrease in industrial melanism is a testament to the effectiveness of environmental regulations in protecting biodiversity and restoring the balance of ecosystems.

In conclusion, the change in the percentage of light colored moths and dark colored moths between 1850 and 1900 was a result of industrial melanism, while the change between 1950 and 2000 was a result of both industrial melanism and the success of environmental regulations.

Answer:

Please read below:

Explanation:

Hypothesis: The best time of day for kite surfing off a coastal beach would be in the late afternoon, around 3 pm to 5 pm, when the wind speed and direction are typically at their most favorable.

Data Gathering:

To gather data and test our hypothesis, we would need to collect information on wind speed and direction at different times of day over a period of time, as well as observe the ocean conditions during these times. Here is a potential plan for collecting the data:

Conduct research on the typical wind patterns and conditions for the specific coastal beach we will be investigating. This could involve reviewing weather records and speaking with local experts or experienced kite surfers.

Set up a data collection system to measure wind speed and direction. This could involve using an anemometer or wind meter, and placing it at a consistent location on the beach to measure the wind speed and direction at regular intervals throughout the day.

Conduct observations of ocean conditions at the same time as the wind measurements. This could involve looking for any visible signs of waves, swell, or other conditions that may impact kite surfing.

Collect data at various times of the day, including early morning, midday, and late afternoon. We may also want to collect data on a range of different weather conditions, such as sunny vs cloudy days, to get a more comprehensive understanding of the best time of day for kite surfing.

Analyze the data collected and look for patterns in wind speed, direction, and ocean conditions during each time of day. We may also want to compare the data collected to our initial research and see if it supports our hypothesis.

Use the data and analysis to make a conclusion about the best time of day for kite surfing off the coastal beach, and share our findings with the kite surfing community.

Overall, by collecting and analyzing data on wind speed and direction, as well as observing ocean conditions, we can determine the best time of day for kite surfing off a coastal beach and share this information with the kite surfing community.

Respiratory tract refers to a ciliated variety of pseudostratified columnar epithelium.

It is frequently referred to as pseudostratified columnar epithelium because it infrequently manifests as squamous or cuboidal epithelia. Pseudostratified ciliated columnar epithelium is seen in the illustration. The trachea and some other areas of the upper respiratory tract are lined by pseudostratified columnar epithelia. The respiratory epithelium is another name for the ciliated kind.

The term "ciliated pseudostratified columnar epithelium" refers to pseudostratified columnar epithelial tissue that has cilia on the surface. On the apical surface of these epithelial cells, cilia of various lengths are visible.

To know more about Respiratory tract visit:-

https://brainly.com/question/13402640

#SPJ4

Synthetic biologists can take several steps to account for environmental stressors when designing a chassis organism.

For stressors this can be done as:

Characterizing the natural habitat: Synthetic biologists can investigate the environment of the chassis organism in its natural habitat.

Stress testing: To learn how the chassis organism responds and find any potential flaws or restrictions, synthetic biologists can submit the organism to environmental stressors in a controlled laboratory setting.

Utilizing robust organisms: Synthetic biologists can use chassis species that have a built-in resistance to environmental stressors like high pH or harsh temperatures.

Designing stress-resilient modules: Synthetic biologists are able to create biological components that can withstand a variety of stresses from their environment and incorporate these components into the chassis organism.

Environmental conditions can be continuously monitored and modified by synthetic biologists using sensors and other monitoring tools in order to ensure optimal development and function.

To know more about stressors click here,

brainly.com/question/9229483

#SPJ4

Meselson and Stahl's experiment proved that DNA replicated semi-conservatively, which means that each of its strands acts as a template for the synthesis of a new, complementary strand.

Matthew Stanley Meselson and Franklin William Stahl in the US demonstrated semi-conservative DNA replication in the 1950s, showing that each daughter DNA molecule contains one new daughter subunit and one subunit conserved from the mother DNA molecule.

This work was later named after them. From October 1957 to January 1958, the experiment was carried out at the California Institute of Technology (Caltech) in Pasadena, California. The study supported James Watson and Francis Crick's semi-conservative double helix model of DNA structure, which showed that DNA is made up of two helical strands that are coiled together.

Later, the Watson-Crick Model for DNA came to be regarded as the only valid DNA model. The Meselson-Stahl experiment allowed scientists to explain how DNA repeats, giving genetic phenomena like inheritance and illness a physical basis.

Learn more about Meselson and Stahl's experiment with the help of the given link:

brainly.com/question/29891911

#SPJ4

The position of the nostril—the direction in which it opens—indicates that humans are closer to ancient monkeys and apes than to new-world primates.

The main difference between old-world monkeys, apes, and new-world primates is that old-world monkeys have noses and nostrils that face downward (catarrhine), whereas new-world primates have noses that face sideways and are flat.

Because humans have a nose that faces down, we can tell from looking in the mirror that they are more like old-world monkeys and apes.

Know more about primates here: https://brainly.com/question/30144622

#SPJ4

Advantage of choosing Juan Carlos over his brother or sister was that same gene transfer occurs from one generation to another which is not possible on choosing his brother or sister.

Researchers are utilizing different procedures to modify the genome of certain life forms. They are doing as such to make financially significant plant assortments and microorganisms, to treat sickness, to screen the visualization and treatment therapy of assortments, and so on.  The Techniques for gene transfer include various strategies like formation, transduction, and so on.

Gene transfer starting with one organic entity then onto the next is a characteristic cycle that outcomes in natural quality variety. It is a normal research center strategy for bacterial strains like E. coli. Quality exchange in microorganisms should be possible by three strategies, to be specific, formation, change and transduction.

Addition of irrelevant hereditary data into cells as DNA is known as quality exchange. Quality exchange should be possible for different reasons. The treatment of sicknesses through quality exchange to give patients helpful qualities is maybe the most convincing of these reasons. There are likewise different strategies for moving genes.

To know more about gene transfer,visit here:

https://brainly.com/question/3274781

#SPJ4

The actual size of the organelle is 15-20 nanometers

organelles are subcellular structures that have one or more specific jobs to perform within the cell, just like organs.

The function of cell organelles is to maintain balance or homeostasis within the cell. Examples of cell organelles are the nucleus, ribosomes, mitochondria, and endoplasmic reticulum.

Some parts of the human cell structure are called cell organelles and have roles like organs in the body. The size of the organelles is very small, around 15-20 nanometers.

Characteristics of cell organelles:

Your question is not complete, maybe what your question means is :

The cell organelle shown below is magnified ten thousand times. What is the actual size of the organelle?

Learn more about the organelle responsible for producing energy here :

https://brainly.com/question/2135497

#SPJ1

This result suggests that the phage mutant and the wild-type (WT) phage are in competition for the same bacterial host cells.

When both phages are present, they compete for the same host cells, leading to the formation of smaller plaques, which indicate a lower number of bacterial lysis events compared to when only the WT phage is present. This is because the presence of the mutant phage reduces the efficiency of the WT phage in infecting and lysing bacteria, and vice versa.

Small plaque formation in this scenario is a result of reduced efficiency of either the mutant phage or the WT phage in infecting and lysing bacteria, leading to a reduction in the number of phage particles produced and hence the size of the plaque.

The result is an example of the phenomenon of phage interference, where the presence of two or more phages can affect each other's ability to infect and lyse bacteria, leading to reduced efficiency of one or both phages. This phenomenon can have important implications for the use of phages as a tool for biocontrol and for the evolution of phages and their interactions with bacterial hosts

To know more about mutants click here:

brainly.com/question/28296830

#SPJ4

The occurrence of the same amino acid sequence in digestive proteins in two morphologically unrelated species provides evidence that these two species have common ancestor.

In general , Proteins are said to be composed of long chains amino acids, and the sequence will determines the structure and function of the protein. Hence , In the case of digestive proteins, to break down specific types of food  is crucial adaptation for survival. If species have similar digestive proteins having the same amino acid sequences, it indicated that they have  evolved independently and these adaptations are also similar with respect to environmental pressures.

Hence,  phylogenetic analysis would be the approach to confirm if these two species have common ancestor or have evolved as the individual traits .

To learn more about common ancestor , here

brainly.com/question/30394210

#SPJ4

The neural plate is a coherent structure made up of cells connected by junctional complexes. The neural plate's neuroepithelial cells undergo structural modifications that lead to the creation of the neural groove and eventually the neural tube.

Motor neurons transport information from the brain to the rest of the body, enabling muscles to move. These connections form the basis of how we think, learn, move, and feel. They regulate our body' functions, such as respiration, digestion, and heartbeat.

The neural folds at the ends of the neural plate push the ends of the plate up and together.

learn more about neural plate

https://brainly.com/question/24277121

#SPJ4

Hemorrhagic stroke seems to have affected the greatest amount of brain tissue.

What is hemorrhagic stroke?

A hemorrhagic stroke, which can be fatal, is caused when a blood artery in the brain bursts and starts to haemorrhage. Your brain's regular blood flow may be hampered, depriving some regions of oxygen. Blood buildup also exerts pressure on nearby brain regions, causing harm or even death.

When you have a hemorrhagic stroke, your brain or the area around it bleeds heavily. There is only so much room for the bleeding to go because this is taking place inside of your skull. That damages the surrounding brain tissue by applying too much pressure to it. The pressure will destroy those brain cells if it is too high or remains high for an extended period of time, harming the brain permanently.

Hence the correct answer is hemorrhagic stroke

To learn more about hemorrhagic stroke from the given link

https://brainly.com/question/27936989

#SPJ1

Answer:

a bending

Explanation:

because bending us the answer

The three correct answers to the question are extrusion, forging, and rolling. These processes are widely used in the manufacturing industry to produce a wide range of products, and they play a critical role in the production of metal products such as tubes, rods, sheets, and structural components. The selection of a specific bulk deformation process depends on various factors, such as the properties of the material, the desired shape and size, and the required accuracy and surface finish.

Bulk deformation processes refer to a set of manufacturing methods that involve the deformation of large quantities of material to shape, form, or modify the properties of the material. These processes are widely used in the manufacturing industry to produce a wide range of products, such as pipes, wires, rods, sheets, and structural components. Among the various bulk deformation processes, some of the most commonly used ones include bending, deep drawing, extrusion, forging, rolling, and shearing. In this answer, we will discuss the three correct answers to the question.

Extrusion:

Extrusion is a bulk deformation process that involves the forcing of a material through a die to produce a continuous profile. The process is commonly used to produce complex cross-sectional shapes such as tubes, rods, and rails. During the process, the material is heated to a suitable temperature and then forced through the die by applying pressure. Extrusion is commonly used in the production of aluminum and other metal products.

Forging:

Forging is a bulk deformation process that involves the shaping of metal by applying pressure to it. The process can be performed using a hammer or a press, and it can be carried out at room temperature or at high temperatures. Forging is commonly used in the production of automotive and aerospace components, such as engine parts, landing gear, and turbine blades.

Rolling:

Rolling is a bulk deformation process that involves the reduction of the thickness of a material by passing it through a set of rollers. The process is commonly used in the production of metal sheets, plates, and foils. During the process, the material is fed through the rollers and the distance between the rollers is gradually reduced, causing the material to become thinner. Rolling is commonly used in the production of steel, aluminum, and other metals.

Here you can learn more about bulk deformation

https://brainly.com/question/29839374#

#SPJ11

Answer:

Explanation:

I'm sorry, but I am not sure which context you are referring to or which traits you are referring to for boxes 6 and 7. Could you please provide more information or context so I can better understand your question and provide a helpful answer?

Answer:

photosynthesis works best at the top of the graph

Explanatiwrite this

the optimum rate for photosynthesis is shown in the graph at the very top

A positive result for the endospore stain indicates that the organism has the ability to form endospores. Endospores are highly resistant, dormant structures that some bacterial species can form under certain environmental conditions, such as nutrient limitation or exposure to extreme temperatures, chemicals or radiation. Endospores have a distinct structure and are highly resistant to many environmental stresses, including heat, desiccation, and disinfectants. Endospore formation is an adaptive survival strategy that allows certain bacterial species to withstand unfavorable conditions until the environment becomes more favorable for growth and reproduction again. Therefore, a positive endospore stain suggests that the organism has the potential to survive harsh conditions by forming endospores.

Understanding the molecular structure of DNA,it is an example of application of c)reductionism concept to the study of biology..So,correct option is c.

Reductionism is any of a few related philosophical thoughts with respect to the relationship between peculiarities which can be depicted as far as other less difficult or more central phenomena.[1] It is likewise portrayed as a scholarly and philosophical place that deciphers a mind boggling framework as the amount of its parts.

Reductionism can be applied to any peculiarity, including objects, issues, clarifications, speculations, and meanings.For technical disciplines, use of strategic reductionism endeavors clarification of whole frameworks with regards to their individual, constituent parts and their collaborations. For instance, the temperature of a gas is diminished to nothing past the normal motor energy of its particles moving. Thomas Nagel and others talk about 'psychophysical reductionism' (the endeavored decrease of mental peculiarities to physical science and science), and 'physico-compound reductionism' (the endeavored decrease of science to physical science and science).

Hence,correct option is c.

To know more about reductionism,visit here:

https://brainly.com/question/28901579

#SPJ4

(Complete question) is:

to understand the chemical basis of inheritance, we must understand the molecular structure of dna. this is an example of the application of which concept to the study of biology? group of answer choices a)feedback b)regulation c)reductionism d)evolution e)emergent properties

Autotrophs are organisms that produce their own food through photosynthesis, absorbing sunlight and converting it into energy. They are the primary source of food for nearly all other living organisms on Earth.

Autotrophs are creatures that can generate their own sustenance through the use of light, water, carbon dioxide, and other inorganic molecules. They are the major producers in most ecosystems, transforming solar energy into chemical energy that may be stored in the form of food.

Autotrophs, often known as producers, are the primary food makers for other living species. Autotrophs are creatures that can manufacture their own food via a process known as photosynthesis. Autotrophs receive sunlight and transform it into energy, which they utilise to produce their own food from inorganic substances like carbon dioxide and water. As a result, autotrophs provide practically all other living things on Earth with their principal source of nourishment.

To learn more about autotroph, visit

brainly.com/question/16989903

#SPJ4