Carbon is transferred between the surface and deep ocean through a variety of processes, including vertical mixing and diffusion, upwelling, and biological processes such as photosynthesis, respiration, and excretion.
Vertical mixing and diffusion occur when currents and waves mix the surface and deep water layers, allowing carbon to be transferred from one layer to the other. Upwelling is the process of deep ocean water rising to the surface, bringing with it dissolved carbon from the deep ocean. Finally, biological processes such as photosynthesis, respiration, and excretion also move carbon from the surface to the deep ocean.
Learn more about carbon transferred;
https://brainly.com/question/23031731
#SPJ4
Which of the following are ways carbon is transferred between the surface and deep ocean? select all that apply.
diffusionupwellingadvectionphotosynthesisrespiration.Which of the following is NOT considered an essential nutrient for photosynthesis or phytoplankton growth?Nitrogen (N)Phosphorus (P)Iron (Fe)Silicon (Si)Aluminum (Al)
Aluminum (Al) is not considered an essential nutrient for photosynthesis or phytoplankton growth.
While aluminum is abundant in the Earth's crust, its availability is dependent on soil pH, and it is not required for photosynthesis or phytoplankton growth. The essential nutrients for photosynthesis and phytoplankton growth are:
nitrogen (N)phosphorus (P)iron (Fe)silicon (Si).Photosynthesis and phytoplankton growth are essential processes in the global carbon cycle. Photosynthesis uses light energy to convert carbon dioxide and water into energy-rich organic compounds, while phytoplankton growth utilizes organic compounds to produce organic matter. Both processes are essential for maintaining the balance of carbon dioxide in the atmosphere and oceans.
Learn more about photosynthesis or phytoplankton:
https://brainly.com/question/844604
#SPJ4
PLEASE HELP ME I NEED IT ASAP
A cell notation of the overall cell equation would be.
What is a galvanic cell?An electrochemical cell called a galvanic cell, also called a voltaic cell, generates an electrical current as a result of a chemical reaction. Two electrodes, a cathode and an anode, separated by an electrolyte, make up the fundamental parts of a galvanic cell.
(a) By merging the half-cell processes, one can obtain the overall cell equation:
Zn(s) is converted into Zn2+ (aq) + 2e- while Sn2+ (aq) + 2e- is converted into Sn (s), we obtain Zn(s) + Sn2+ (aq) Zn2+ (aq) + Sn
by combining the half-cell reactions (s)
(b) Zn(s) acts as the oxidising agent, losing electrons to produce Zn2+.
(c) Using the half-cell reactions' standard electrode potentials as a starting point, one can compute the reaction's standard cell potential:
E cell is made of Eo oxidation and Eo reduction.
E cell equals -0.14 V - (-0.76 V) = 0.62 V.
To know more about galvanic cell, visit:
https://brainly.com/question/30268944
#SPJ1
which of the following compounds are expected to be soluble in carbon tetrachloride (ccl4) based on structure? select all that apply.
C8H18 compound is expected to be soluble in carbon tetrachloride (ccl4) based on structure.
Carbon tetrachloride (CCl4) is a nonpolar solvent, meaning it dissolves nonpolar compounds but not polar compounds. The solubility of a compound in CCl4 is dependent on the strength of the intermolecular forces between the solvent and solute.
Compounds with similar polarities to CCl4, such as nonpolar or slightly polar compounds, are expected to be soluble in CCl4. For example, alkanes, such as hexane (C6H14), and chlorinated solvents, such as chloroform (CHCl3), are soluble in CCl4.
On the other hand, polar compounds, such as water (H2O) or ethanol (C2H5OH), are not expected to be soluble in CCl4 due to the difference in polarities between the solvent and solute.
In summary, nonpolar or slightly polar compounds are expected to be soluble in CCl4, while polar compounds are not.
Learn more about carbon tetrachloride:
brainly.com/question/23871944
#SPJ4
which of the following compounds are expected to be soluble in carbon tetrachloride (ccl4) based on structure? select all that apply.
A. C8H18
B. C6H12
C. C4H6
D. None of the above
contrast the thomsom model and the rutherford model of the atom
The Thomson model of the atom proposed that the atom was a sphere of positive charge with negative electrons embedded in it. This model was later disproved by the Rutherford model, which proposed that the atom was composed of a small, dense, positively charged nucleus surrounded by a cloud of negatively charged electrons. The Rutherford model also suggested that the electrons were in orbit around the nucleus, rather than being embedded in it.
What is the evidence that the device uses electricity?
Answer:
Bills
it usage of data and bills
A company uses a substance that is a solid under normal conditions. This substance will be used in extreme conditions, which could make the substance’s molecules move faster and cause a phase change. How would this phase change occur, and how would the molecules of the substance be affected under these extreme conditions? Energy would be transferred . . .
The ways in which this phase change occur, and how would the molecules of the substance be affected under these extreme conditions would be when shift happens in which heat is applied or removed at a specific temperature.
What is Temperature?This is referred to as the degree of hotness or coldness of a substance and it is influenced by thermal energy.
Increase or decrease in the temperature of a substance is responsible for the phase changing from one form to another under extreme conditions being used as a n example.
Read more about Temperature here https://brainly.com/question/24746268
#SPJ1
Calculate the volume of 1.0M copper(II) sulfate solution required to completely react with 1.0g of Fe(s) according to this equation: 2Fe(s)+3Cu2+(aq)→2Fe3+(aq)+3Cu(s).
0.0269 Litre is the volume of 1.0M copper(II) sulfate solution required to completely react with 1.0g of Fe(s) according to this equation: 2Fe(s)+3Cu2+(aq)→2Fe3+(aq)+3Cu(s).
What do you mean by molarity ?The term molarity is defined as the number of moles of solute present in per litre of solution.
Given:
Moles of Fe = mass of Fe / molar mass of Fe
Mole Fe = 1.0 g / 55.845 g/mol
= 0.0179 mol
According to the balanced chemical equation,
3 mol Cu2+ are required to react with 2 mol Fe.
So, the number of moles of Cu2+ required to react with 0.0179 moles of Fe is mol Cu2+ = (3/2) x mol Fe
= (3/2) x 0.0179 mol
= 0.0269 mol
By using the molarity,
mole = concentration x volume
volume = moles / concentration
Volume = 0.0269 mol / 1.0 mol/L
Volume = 0.0269L
Thus, the volume of 1.0 M Cu⁺² solution required to fully react with 1.0 g of Fe is 0.0269 L.
To learn more about the molarity, follow the link;
https://brainly.com/question/8732513
#SPJ1
g 2.27 what type(s) of bonding would be expected for each of the following materials: (a) brass (a copper-zinc alloy) (b) epoxy (c) barium sulfide (bas) (d) solid xenon (e) aluminum phosphide (alp)
The bonding expected for each material is covalent, ionic, and metallic bonds.
The force of attraction that leads to the holding of atoms or ions together in a molecule or crystal is said to be bonding. The bond formation can happen by either attraction or transfer of electrons. There are single, double, and triple bonds. There are many sorts of bonding namely:
a. Brass: It is an alloy of metal that's copper and zinc. Hence, metallic bonding is present within the brass.
b. Epoxy: It is a polymer whose monomer unit isoprene, which may be a covalent compound. The isoprene units are attached in repeated units to make rubber by covalent bonding.
c. Barium sulfide: Due to the large electronegativity difference between barium and sulfur, barium sulfide is an ionic compound. Thus, ionic bonding is present in barium sulfide.
d. Solid xenon: Only xenon atoms are present in solid xenon which are interacted by weak Van der Waal's interactions. Iconic bond is present.
e. Aluminum phosphide: Aluminum phosphide may be a covalent compound and thus involves covalent bonding.
To learn more about chemical bonds:
brainly.com/question/819068
#SPJ4
Perform this operation solving for x. Give answer to the proper number of significant figures.
x=0.01953 cm + (7.32 x 10^-3 m)
Answer: x = 0.752cm or 0.00752m
Explanation:
There are two ways to do this. The first is converting the number in meters (m) to centimeters (cm) and then adding. The second is converting the number in centimeters (cm) to meters (m) and then adding.
Way 1:
0.00732m * (100cm / 1m) = 0.732cm
0.01953cm + 0.732cm = 0.75153
With addition, the amount of significant figures for the answer is the same number of significant figures as the limiting one (or, in other words, the one with the least number of significant figures). In this case, 0.732cm has 3 significant figures and 0.01953cm has 4. This means that the answer has 3 significant figures.
So with significant figures, 0.75153cm = 0.752cm
Way 2:
0.01953cm * (1m / 100cm) = 0.0001953m
0.0001953m + 0.00732m = 0.0075153m
With significant figures, 0.0075153m = 0.00752m
how may moles are in 5.1 X 10^25 atoms of He?
Answer:
Explanation:
0.87
What is The Change in Energy When an electron relaxes from n=3 to the n=2 state? is energy absorbed or emited? what is the wavelength of light associated with this transition .
your unknown will contain only two of the three possible compounds. you must identify which two compounds were present in your unknown mixed sample
Identifying the two compounds present in an unknown mixed sample can be a challenging task, but a combination of these techniques can help to narrow down the possibilities and eventually identify the compounds.
Here are some possible approaches:
Analyze the physical and chemical properties of the unknown sample, such as melting point, boiling point, solubility, reactivity with certain chemicals, and spectroscopic data (e.g., IR, NMR, UV-Vis). Compare these properties to those of known compounds and see which ones match.
Use various separation techniques to isolate each individual component of the mixture, such as extraction, distillation, chromatography, and crystallization. Then, analyze each isolated component using various analytical techniques to determine its identity.
Use chemical tests and reactions to identify the functional groups or chemical characteristics of the unknown sample. For example, if the sample contains a carbonyl group, it can be tested with 2,4-dinitrophenylhydrazine to form a characteristic orange precipitate.
Overall, identifying the two compounds present in an unknown mixed sample can be a challenging task, but a combination of these techniques can help to narrow down the possibilities and eventually identify the compounds.
Learn more about dinitrophenylhydrazine here:
https://brainly.com/question/14985873
#SPJ4
Which of the following is NOT a type of molecular interaction that determines the tertiary structure of a protein?A. covalent bonds between purines and pyrimidine basesB. ionic bondsC. Van der Waals forcesD. covalent bonds between two cysteine amino acidsE. hydrogen bonds
Covalent bonds between purines and pyrimidine bases is NOT a type of molecular interaction that determines the tertiary structure of a protein. The correct answer is A.
A polypeptide's overall three-dimensional structure is referred to as its tertiary structure. The interactions between the R groups of the amino acids that make up the protein are principally responsible for the tertiary structure.
The entire spectrum of non-covalent bonds, including hydrogen bonds, ionic bonds, dipole-dipole interactions, and London dispersion forces, all contribute to tertiary structure.
For instance, R groups with opposite charges can form an ionic bond, while those with like charges repel one another. Similar to other dipole-dipole interactions, polar R groups can create hydrogen bonds
Hydrophobic interactions are crucial to tertiary structure because they allow hydrophilic amino acids to connect with nearby water molecules on the outside of the protein while forming clusters of nonpolar, hydrophobic R groups on the inside of the protein.
The disulfide link is a unique sort of covalent bond that can contribute to tertiary structure. Disulfide bonds, covalent connections between the side chains of cysteines that contain sulfur, are substantially more powerful than the other kinds of bonds that make up tertiary structure.
They serve as molecular "safety pins," firmly connecting various polypeptide components to one another.
Learn more about molecular interaction at https://brainly.com/question/21220768
#SPJ4
Indicate the subatomic particle described by each of the statements. A statement may describe more than one particle. possesses a negative charge has no charge has a mass slightly less than that of a neutron has a charge equal to but opposite in sign to that of an electron is not found in the nucleus Answer Bank has a positive charge proton neutron can be called a nucleon electron is the heaviest of the three subatomic particles has a relative mass of 1836 if the mass of an electron is 1 has a relative mass of 1839 if the mass of an electron is 1
a)possesses a negative charge - electron
b)has no charge - neutron
c)has a mass slightly less than that of a neutron - proton
d)has a charge equal to, but opposite in sign from, that of an electron - proton.
What has a negative charge?
Electrons have a negative charge. The charge on the proton and electron are exactly the same size but opposite. Neutrons have no charge. Since opposite charges attract, protons and electrons attract each other.
What are the four properties of neutrons?
Neutrons are neutral particles – with no net electric charge.
Neutrons have a non-zero magnetic moment.
Free neutrons (outside a nucleus) are unstable and decay via beta decay.
Is a neutron's mass slightly less than a proton's?
The mass of a neutron is slightly greater than the mass of a proton, which is 1 atomic mass unit (AMU).
Is the charge of an electron opposite to the charge of a proton?
Electrons and protons have equal and opposite charges. The magnitude of this charge is 1.6×10−19 Coulomb.
To know more about protons, neutrons, and electrons:
https://brainly.com/question/29248303
#SPJ4
When a salt is dissolved in water, it is represented by the following notation in a chemical reaction?a) (l)b) (s)c) (aq)
When a salt is dissolved in water, it is represented by c) aq.
A reaction occurs when there is a change in the state of the reactant leading to the formation of the new product.
When a compound gets dissolved, the solution becomes an aqueous solution of that compound.
In the case of a salt, when it gets dissolved into water, the ionic bonds existing between the atoms break to form ions. The solid salt then changes into aqueous solution of the salt.
What is aq symbol in chemistry?
In a chemical equation, the subscript (aq) after a molecule means that it is aqueous. An aqueous solution is a solution in which the solvent is water.
What is an aqueous solution?
An aqueous solution is one in which the solvent is liquid water. That is, solute (dissolved) ions and molecules are surrounded by water molecules and incorporated into the network of bonds within the water. The dissolved species then spread throughout the water.
To know more about an aqueous solution:
https://brainly.com/question/19587902
#SPJ4
A temperature of 15 oc a quantity of oxygen has a volume of 250ml if it’s perature is raised 45 oc what will be it’s volume
In a temperature of 15°C a quantity of oxygen has a volume of 250ml if its temperature is raised 45°C. 276ml its volume.
What is ideal gas law ?The Ideal Gas Law explains the relation between pressure and volume in an ideal gas. where P is the pressure measured in atmospheres, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in kelvin.
According to Ideal gas law:
PV = nRT
Rearranging this equation
V / T = nR / P
At constant pressure:
V₁ / T₁ = V₂ / T₂
By substituting values in this equation and we get:
250 / (15 + 273) = V / (45 + 273)
V = 276
When using the ideal gas law, remember to always use absolute units for temperature, like Kelvin.
Thus, In a temperature of 15°C a quantity of oxygen has a volume of 250ml if its temperature is raised 45°C. 276ml its volume.
To learn more about an ideal gas law, follow the link;
https://brainly.com/question/13821925
#SPJ1
Calculate the volume of 1.0M copper(II) sulfate solution required to completely react with 1.0g of Fe(s) according to this equation: 2Fe(s)+3Cu2+(aq)→2Fe3+(aq)+3Cu(s).
0.0269 litre is the volume of 1.0M copper(II) sulfate solution required to completely react with 1.0g of Fe(s) according to this equation: 2Fe(s)+3Cu₂+(aq)→2Fe₃+(aq)+3Cu(s).
What is molarity ?The term molarity is defined as the concentration of number of moles of solute present in per litre of solution.
Given:
Moles of Fe = mass of Fe / molar mass of Fe
Mole Fe = 1.0 g / 55.845 g/mol
= 0.0179 mol
By the balanced chemical equation,
3 mol Cu⁺² are required to react with 2 mol Fe.
Then, the number of moles of Cu⁺² required to react with 0.0179 moles of Fe is mol Cu⁺² = (3/2) x mol Fe
= (3/2) x 0.0179 mol
= 0.0269 mol
According to the molarity,
mole = concentration x volume
volume = moles / concentration
Volume = 0.0269 mol / 1.0 mol/L
Volume = 0.0269L
Thus, the volume of 1.0 M Cu⁺² solution required to fully react with 1.0 g of Fe is 0.0269 L.
To learn more about the molarity, follow the link;
brainly.com/question/8732513
#SPJ1
O Hydrogen More than 500 years ago, Para of the reaction of an acid and repeated Paracelsus's experi flammable.
The statement that Hydrogen was discovered more than 500 years ago due to the reaction of an acid and metals ... repeated Paracelsus 's experiment, the gas was flammable, is true.
How was hydrogen discovered ?When Paracelsus combined acids with metals, hydrogen gas was produced as a byproduct, which he observed unintentionally. A Swiss-born physician named Theodore de Mayerene who subscribed to Paracelsian thought replicated Paracelsus' research on the interaction of metals and acids.
De Mayerne found that the byproduct gas was combustible, which was an important finding in the future knowledge of chemical reactions even if he was unaware that the gas created was hydrogen or even a new element.
Find out more on Paracelsus at https://brainly.com/question/10644901
#SPJ1
The correct question is:
Hydrogen was discovered more than 500 years ago due to the reaction of an acid and metals and when Theodore de Mayerene repeated Paracelsus 's experiment, the gas was flammable.
True
False
In a first-order reaction at 300 K, the half-life is 2.50 x 10^4 seconds and the activation energy is 103.3 kJ/mol.
What is the rate constant at 350 K?
Answer:
In a first-order reaction at 300 K, the half-life is 2.50 x 10^4 seconds and the activation energy is 103.3 kJ/mol.
What is the rate constant at 350 K?
Explanation:
which statement explains the relationship between the amount of energy it takes to break a bond and the amount of energy released when the same bond is formed?
The amount of energy it takes to break a bond is always less than the amount of energy released when the bond is formed.
This is because when a bond is broken, the energy that was used to form the bond is released, leading to an overall decrease in energy. This energy released is referred to as bond energy.
Bond energy is a measure of the energy stored in the bond between two atoms. It is the energy required to break the bond and form two separate atoms. Bond energy is released when a bond is formed, resulting in an overall decrease in energy.
Learn more about energy to break a bond :
https://brainly.com/question/26544505
#SPJ4
The amount of energy it takes to break a chemical bond is equal to the amount of energy released when the same bond is formed.
Bond dissociation energy and bond formation enthalpy are two important concepts in chemical bonding. Bond dissociation energy is the amount of energy required to break a bond between two atoms in a gaseous state, while bond formation enthalpy is the energy released when the same bond is formed.
These two energies are equal and opposite in nature, meaning that the amount of energy required to break a bond is equal to the amount of energy released when the bond is formed. This relationship is important for understanding the stability of chemical bonds and the energy changes that occur during chemical reactions.
You can learn more about chemical bonds at
https://brainly.com/question/819068
#SPJ4
refer to the free energy diagrams below to answer the following questions. you may assume that the y-axis is the same and directly comparable for all five reactions.
The free energy diagrams can be used to compare and analyze the thermodynamic properties of different chemical reactions.
The y-axis of the diagrams represent the free energy of the reaction, and the x-axis represents the progress of the reaction from the reactants to the products. By comparing the free energy diagrams of different reactions, it is possible to determine which reactions are more thermodynamically favorable, and thus more likely to occur spontaneously.
Additionally, the diagrams can also provide insight into the activation energy of a reaction, which is the amount of energy needed to initiate the reaction.
Learn more about free energy diagrams:
https://brainly.com/question/6589816
#SPJ4
1. What is the usual state of oxygen and hydrogen?
Under normal circumstances, oxygen is an inert, colorless, odorless gas that condenses into a pale blue liquid. Colorless, tasteless, odorless, and non-metallic hydrogen has the chemical formula H2.
Is hydrogen a liquid or a gas?The lightest element is hydrogen. Gas is a vapor at normal pressure and temperature, but at a temperature of -423 degrees F, it crystallizes into a liquid.
Is hydrogen fuel less expensive than regular fuel?Midsize gasoline hybrids achieve 42 mpg on average, compared to 30 mpg for gasoline vehicles. The graphic illustrates how much more fuel an FCV costs per mile than like a fuel hybrid and how much more it costs than a traditional gasoline car.
To know more about Hydrogen visit:
https://brainly.com/question/11837837
#SPJ1
A scientist goes to lab to synthesize Na3AlF6 via the balanced chemical reaction
below. If they need 780. grams of Na3AlF6, and the overall percent yield is 45.4 %, how
much Al2O3 (in grams) is needed? You may assume NaOH and HF is in excess here.
6 NaOH + Al2O3 + 12 HF → 2 Na3AlF6 + 9 H2O
A scientist goes to lab to synthesize Na₃AlF₆ via the balanced chemical reaction. If they need 780. grams of Na₃AlF₆, and the overall percent yield is 45.4 %,311.79 g of Al₂O₃ is required to form 780 grams of Na₃AlF₆.
What do you mean by the balanced chemical reaction ?The balanced chemical reaction is defined as the mass of total number of product is exactly equal to the total number of mass of reactant.
Given:
45.4% yield = 780 g
Then 100% yield would be =780 × (100/45.4)
= 1718 g
Molar mass of Na₃AlF₆ = 209.94 g/mol
Molar mass of Al₂O₃ = 101.96 g/mol
1mole of Al₂O₃ gives 2 moles of Na₃AlF₆ .
⇾ 101.96 g of Al2O3 gives 2 × 209.94 g of Na3AlF6
Therefore, x g of Al2O3 gives 1284 g of Na3AlF6
x = (1718 × 101.96)/ 2 × 209.94
= 311.79 g
Thus, 311.79 g of Al₂O₃ is required to form 780 grams of Na₃AlF₆.
To learn more about the balanced chemical reaction, follow the link;
https://brainly.com/question/29997907
#SPJ1
Neon and HF have approximately the same molecular masses. Explain why the boiling points of Neon and HF differ?
Neon is a noble gas, which means that its molecules do not have any permanent dipole moments and are therefore not attracted to each other.
What is a noble gas?The noble gases are a group of chemical elements that share many characteristics; under normal circumstances, they are all odourless, colourless, monatomic gases with very low chemical reactivity. Historically, the noble gases were also known as the inert gases. The six naturally occurring noble gases are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radioactive radon (Rn).
Oganesson (Og) is a highly radioactive element created synthetically. Although IUPAC has referred to "group 18" as a "noble gas" and thus included oganesson, it may not be significantly chemically noble and is predicted to break the trend and be reactive due to relativistic effects. Its chemistry has not yet been studied due to the extremely brief 0.7 ms half-life of its sole known isotope.
To learn more about molecules
https://brainly.com/question/475709
#SPJ4
For an addition reaction, why does the free energy term, G, become more positive with increasing temperature?
A) The positive entropy term dominates at high temperature.
B) The negative entropy term dominates at high temperature.
C) The positive enthalpy term dominates at high temperature.
D) The negative enthalpy term dominates at high temperature.
E) The enthalpy and entropy terms cancel at high temperature.
For an addition reaction, why does the free energy term, G, become more positive with increasing temperature because the positive entropy term dominates at high temperature. So, option A is correct.
In an addition reaction, the free energy, G, is influenced by both the enthalpy, H, and entropy, S, terms. As temperature increases, the entropy term becomes more positive, while the enthalpy term remains relatively constant. At high temperatures, the positive entropy term dominates, causing the free energy, G, to become more positive. This means that the reaction becomes less favorable and less likely to occur.
The entropy term reflects the number of available molecular arrangements in a system and the degree of disorder. At high temperatures, the molecules have more kinetic energy and are more likely to be in disordered states. This results in a larger entropy term and a more positive G.
In contrast, the enthalpy term reflects the heat energy involved in a reaction and the bond-forming or bond-breaking nature of the reaction. At high temperatures, the enthalpy term remains relatively constant, as the reaction is not affected by changes in temperature.
In summary, the positive entropy term dominates at high temperature, causing the free energy, G, to become more positive and the reaction to become less favorable.
You can learn more about free energy at
https://brainly.com/question/27686274
#SPJ4
3 cu 8hno3 --> 3cu(no3)2 2 no 4 h2o in the above equation how many moles of water can be made when 136.8 grams of hno3 are consumed?
2.89 moles of water can be made when 136.8 grams of HNO3 are consumed.
What is mole?Mole is a unit of measure used in chemistry to measure the amount of a substance. It is the amount of a substance that contains an Avogadro's number of molecules, 6.02214076 × 1023.
To calculate the number of moles of water produced when 136.8 grams of HNO3 are consumed in the reaction, we must first calculate the number of moles of HNO3 present in 136.8 grams. To do this, we must divide the mass of HNO3 (136.8 grams) by the molar mass of HNO3 (63.01 g/mol).
Therefore, the number of moles of HNO3 in 136.8 grams is 136.8/63.01 = 2.17 moles.
The equation states that for every 3 moles of HNO3 consumed, 4 moles of water are produced, so we can calculate the number of moles of water produced when 2.17 moles of HNO3 are consumed.
2.17 moles of HNO3 x (4 moles of water/3 moles of HNO3) = 2.89 moles of water.
Therefore, 2.89 moles of water can be made when 136.8 grams of HNO3 are consumed.
To learn more about mole
https://brainly.com/question/24191825
#SPJ4
The reaction A+B 3C always goes to completion. If you have 10 A, how much B do you need to make the
most C?
Select one:
a. 5
b. This cannot be determined from the information given.
c. 10
d. 20
e. 30
C
C
C
The reaction A+B⇒3C always goes to completion. If you have 10 A, the number of B which would be needed to make the most C is 10 and is therefore denoted as option C.
What is a Chemical reaction?This is referred to as a process in which one or more substances, the reactants, are converted to one or more different substances, the products.
If you have 10 A, the number of B which would be needed to make the most C is 10 because of the equal amount number of mole of the substances or elements involved in the reaction.
Read more about Chemical reaction here https://brainly.com/question/11231920
#SPJ1
50. Question The atom of an element X contains 17 protons, 17 electrons and 18 neutrons whereas the atom of an element Y contains 11 protons, 11 electrons and 12 neutrons. (a) What type of ion will be formed by an atom of element X? Write the symbol of ion formed. (b) What will be the number of (i) protons (ii) electrons, and (iii) neutrons, in the ion formed from X? (c) What type of ion will be formed by an atom of element Y? Write the symbol of ion formed. (d) What will be the number of (i) protons (ii) electrons, and (iii) neutrons, in the ion formed from Y?
Answer:
Explanation:
a) If an atom of element X loses one electron, it will form a positively charged ion or cation with the symbol X^+.
b) (i) 17 protons, (ii) 16 electrons, (iii) 18 neutrons.
c) If an atom of element Y gains one electron, it will form a negatively charged ion or anion with the symbol Y^-.
d) (i) 11 protons, (ii) 12 electrons, (iii) 12 neutrons.
Carbon sublimates at high temperature into gas products. Three of these are C, C2, and C3. At 5000 K and for pressures of 1 atm and 0.01 atm, find the gas composition of sublimated carbon assuming that only those three species exist. Use the approach that we used in class for the CO/CO2/O2/O system (same computational approach, but different reactions), What other species could be considered in a more detailed analysis?
Other species that could be considered include CO, CO2, O2, O, and other carbon-containing species such as C4, C5, and so on.
The consideration of these additional species would require a more comprehensive calculation of the reaction kinetics and reaction energies, and would likely lead to a more accurate prediction of the gas composition of sublimated carbon.
The gas composition of sublimated carbon at 5000 K and 1 atm or 0.01 atm pressure can be calculated using the concept of chemical equilibrium. This approach involves finding the concentration of each species of carbon (C, C2, and C3) at equilibrium, taking into account the reaction kinetics and the reaction energies.
At 5000 K, the dissociation and recombination reactions of C, C2, and C3 would be taking place at a rapid rate, leading to the formation of various products. In order to calculate the gas composition, the reaction equations for the dissociation and recombination reactions should be written and the equilibrium constants for each reaction should be calculated. The reaction equations can be written based on the conservation of mass and energy principles, taking into account the heat of formation and reaction enthalpies for each species.
The resulting equilibrium constants can then be used to find the concentration of each species of carbon at 5000 K and 1 atm or 0.01 atm pressure. The final gas composition would be a combination of C, C2, and C3, and the relative proportions of each species would depend on the temperature, pressure, and reaction kinetics.
Learn more about chemical equilibrium here: https://brainly.com/question/8983535
#SPJ4
rutherford's experiment was important because it showed that: A) Atomic NucleusB) ElectronC) ProtonD) Neutron
Rutherford discovered the nucleus . Option B
What did Rutherford discover ?
Ernest Rutherford is famous for his discovery of the structure of the atom and his pioneering work in nuclear physics. He made several key discoveries that transformed our understanding of atomic structure and the behavior of atomic nuclei.
Rutherford performed his famous gold foil experiment in which he used alpha particles to probe the structure of the atom. He found that most alpha particles passed straight through the gold foil, but a small number were deflected. This showed that the atom had a small, dense nucleus at its center.
Learn more about neutrons:https://brainly.com/question/28992636
#SPJ1
Rutherford's experiment was important because it showed that atomic nucleus and is therefore dented as option A.
What is an Experiment?
This is referred to as a procedure carried out to support or refute a hypothesis, or determine the efficacy or likelihood of something previously untried.
Rutherford was a scientist who was famous for his gold-foil experiment, in which he demonstrated that the atom has a tiny, massive nucleus by bombarding aluminum foil with beam of light known as alpha particles which is therefore the reason why option A was chosen as the correct choice.
Read more about Rutherford here https://brainly.com/question/14996029
#SPJ1