The most favorable nucleophile for 1,4-addition with methyl vinyl ketone is sodium cyanide (NaCN).
Sodium cyanide (NaCN) is a highly reactive and strong nucleophile, capable of reacting with methyl vinyl ketone through a 1,4-addition reaction. This reaction is favored by the highly electrophilic carbonyl group in methyl vinyl ketone, which attracts nucleophiles to add to the carbonyl carbon.The reaction of NaCN with methyl vinyl ketone proceeds through nucleophilic attack by the cyanide ion on the carbonyl carbon, leading to formation of a tetrahedral intermediate. .Compared to other nucleophiles listed such as ZnBr2, LiAlH4, and (C6H5)3P=CH2, NaCN is a stronger nucleophile and is therefore more favorable for 1,4-addition with methyl vinyl ketone. Additionally, the reaction with NaCN is typically faster and more efficient compared to other nucleophiles. the 1,4-addition of NaCN to methyl vinyl ketone results in the formation of a product with the negative charge located on the carbon alpha to the carbonyl group, as opposed to the carbonyl carbon itself.
learn more about nucleophile here:
https://brainly.com/question/14052597
#SPJ4
Determine the enthalpy for this reaction:
Ca(OH)2(s)+CO2(g)→CaCO3(s)+H2O(l)
Substance ΔHf∘ (kJ/mol)
CO2(g) −393. 5
Ca(OH)2(s) −986. 1
H2O(l) −285. 8
CaCO3(s) −1207. 0
H2O(g) −241. 8
The standard enthalpy change (ΔHf∘) for the reaction of calcium hydroxide with carbon dioxide to form calcium carbonate and water is −171.3 kJ/mol.
The enthalpy change (ΔH) for a reaction can be calculated using the standard enthalpy of formation (ΔHf∘) of the reactants and products.
The equation for the reaction is:
Ca(OH)2(s) + CO2(g) → CaCO3(s) + H2O(l)
The standard enthalpy change (ΔHf∘) for this reaction can be calculated as follows:
ΔHf∘ = ΔHf∘ (CaCO3) + ΔHf∘ (H2O) − ΔHf∘ (Ca(OH)2) − ΔHf∘ (CO2)
Plugging in the values from the table,
ΔHf∘ = −1207.0 kJ/mol + −285.8 kJ/mol − (−986.1 kJ/mol) − (−393.5 kJ/mol)
= −171.3 kJ/mol
Therefore, the standard enthalpy change (ΔHf∘) for the reaction of calcium hydroxide with carbon dioxide to form calcium carbonate and water is −171.3 kJ/mol.
To learn more about enthalpy change:
https://brainly.com/question/16387742
#SPJ4
Place the steps required to determine whether or not a precipitate forms when two solutionsare mixed in the correct order. Start with the first step at the top of the list.1. Note the ions present in the reactants.2. Use the solubility rules to determine whether or not either of the combinations givesan insoluble salt3. Consider possible cation-anion combinations.
1. To identify the proper order, take note of the ions present in the reactants. 2. Think about various cation-anion combinations. 3. Use the solubility criterion to determine whether one of the combinations produces an insoluble salt.
Cations are ions that are positively charged. Anions are the name for negatively charged ions. Ions are charged atoms or molecules. If one or more of an atom's electrons are lost, it will transform from a balanced atom into a positively charged cation. If an atom adds one or more electrons, it will transform from a balanced atom into a negatively charged anion. Ions come in the form of anions and cations. Because of the contrast between their electrical charges, they are drawn to one another. A cation repels other cations, whereas an anion repels another anion. An anion is an ion that has gained one or more electrons and a net negative charge.
Learn more about Ions here:
https://brainly.com/question/1488567
#SPJ4
Which one of the following corresponds to one mole of a gas at S.T.P.?A. P = 1 atm, T = 273 C, V = 22.4 litreB. P = 1 atm, T = 273 K, V = 22.4 litre C. P = 1 atm, T = 273 K, V = 1 litreD. P = 0.5 atm, T = 273 K, V = 2 litre
The mole is the unit of measurement for the amount of a substance. At standard temperature and pressure (STP), one mole of a gas has a defined volume, pressure, and temperature.
A. P = 1 atm, T = 273 C, V = 22.4 litre: This option is incorrect because the temperature is given in degrees Celsius (273 C) rather than Kelvin (273 K). The temperature should be given in Kelvin for the conditions to be considered STP.
B. P = 1 atm, T = 273 K, V = 22.4 litre: This option is correct. At STP, one mole of a gas has a pressure of 1 atmosphere (atm), a temperature of 273 Kelvin (K), and a volume of 22.4 liters. This volume is known as the molar volume of a gas at STP.
C. P = 1 atm, T = 273 K, V = 1 litre: This option is incorrect because the volume is much smaller than the molar volume of a gas at STP, which is 22.4 liters.
D. P = 0.5 atm, T = 273 K, V = 2 litre: This option is incorrect because both the pressure and volume are not equal to their respective STP values. The pressure at STP is 1 atm and the molar volume is 22.4 liters.
Here you can learn more about standard temperature and pressure (STP)
https://brainly.com/question/7581651#
#SPJ11
select the single best answer. which one of the following is not a permissible contributing structure?
The answer is C. Since C lacks any atoms that can serve as electron transfer nuclei, it cannot be a permitted contributing structure.
CH2 is positioned using oxygen's CH in the first structure. The use of current and electron mobility to read this structure is not permitted. We have given them an additional two CH since they will demand them. The negative kid will be transferred electronically here. This structure is better suited to the entire portion of three H and double bonds. The H three N double bond is the proper structure. And they'll continue. So, in the all figures we can say that C is not a permissible contributing structure.
To learn more about oxygen click here https://brainly.com/question/2272415
#SPJ4
if the molecular formula of a compound is c4h8, what is the empirical formula for the compound?
CnH2n
In the case of C4H8, because there are 4 carbon atoms and there are 8 hydrogen atoms the general formula must be CnH2n where n can be any number.
match the chemical agent with its corresponding common application 2 hypochlorites 2 chlorine gas 3 lodophors Manch each of the options above to the the terms below large-scale disinfection of drinking water disinfection in dairies, food processing plants, restaurants, hospitals, homes sion and tissue antisepsis
Hypochlorites: Widespread water disinfection, as well as disinfection in restaurants, hospitals, food processing facilities, and households. Large-scale water disinfection using chlorine gas.
The removal of hazardous bacteria from surfaces or objects is accomplished through the process of disinfection. By bringing the number of hazardous germs to a level that is safe for human health, disinfection aims to stop the spread of infectious diseases. Hypochlorites, chlorine gas, and lodophors are just a few of the chemical and physical agents that can be employed to disinfect surfaces. The large-scale disinfection of drinking water, the disinfection of houses, hospitals, food processing facilities, dairies, restaurants, and other public places, as well as the antisepsis of wounds and tissues, are only a few applications for these agents. Use of the proper methods, enough time spent in contact with the disinfectant, and proper disinfectant handling and storage are all necessary for effective disinfection.
Learn more about Disinfectants here:
https://brainly.com/question/2934575
#SPJ4
how many carbon atoms are in 5 moles of ethane, c2h6?
There are 6.02 x [tex]10^{24}[/tex] atoms of carbon in 5 moles of ethane.
We can see from the formula of ethane that each molecule has 2 carbon atoms so
1 mole of ethane = 2 moles of carbon atom
5 moles of ethane = 5 x 2 = 10 moles of carbon atom
Avogadro number = 6.02 x [tex]10^{23}[/tex]
Avogadro predicted that identical volumes of any two gases with comparable temperatures and weights must hold an equivalent number of particles in order for this to be true. Only if there were a distinction between atoms and molecules and certain elements, like nitrogen, genuinely existed as molecules, could this law be proven to be true. Given that Avogadro lacked terminology like "molecule" to describe his hypothesis and that his ideas encountered resistance from people like John Dalton, among others, Another chemist, Stanislao Cannizzaro, was required to give Avogadro's theories the attention they deserved. Avogadro had already passed away by the time their concepts acquired popularity.
No. of carbon atoms in 10 moles of carbon = 10 x Avogadro number
= 10 x 6.02 x [tex]10^{23}[/tex]
= 6.02 x [tex]10^{24}[/tex] atoms of carbon
To Know more about Avogadro Number
brainly.com/question/29732984
#SPJ4
how many moles of oh ions are present in 371.1 ml of 0.143 m calcium hydroxide? enter to 4 decimal places.\
Simply put, 1 mole of solute will be dissolved in 1 litre of solution in a 1-M solution. You now are aware that your solution has a volume of 19.0 mL and a molarity of 0.150 M.
What are the parameters for calculating moles of oh ions?If the solution's pOH is known, it is possible to compute the hydroxide ion concentration, [OH -], in mol L-1.
The hydroxide ion concentration in mol L-1 is expressed as the negative logarithm (to base 10) of pOH. pOH = –log 10 [OH -] [OH -] is the amount of hydroxide ions in one mole of water (mol/L or M).
You can anticipate having fewer moles of calcium hydroxide in this sample than you would have in a complete litre of solution because the volume is significantly less than 1 L.
Therefore, 0.0079 moles of oh ions are present in 371.1 ml of 0.143 m calcium hydroxide.
Learn more about moles here:
https://brainly.com/question/29425602
#SPJ4
What happens to the temperature of boiling water when heat is added to the boiling water?
As the heat is added into boiling water, its temperature remains constant.The heat source is employed to convert liquid water to vapor, which is the cause.Latent vaporization heat is the name given to this heat.
Will the amount of heat given affect the boiling point of water?Boiling water's temperature does not rise when it is heated.Water boils at a temperature of about 100°C (lower at higher altitudes), and any additional heat (technically referred to as latent heat) would only cause water particles in the liquid phase to transition into the gas phase.
When heat is applied to water, what happens to the temperature?A pure water body at 100 degrees Celsius does not alter in temperature when added heat to it.The water instead starts to boil as a result.This kind of situation is referred to as a phase transition or change of condition.
To know more about vaporization visit:
https://brainly.com/question/14480429
#SPJ4
A 170.00 g sample of an unidentified compound contains 29.84 g sodium, 67.49 g chromium, and 72.67 g oxygen. What is the empirical formula?
Show work
Answer:
The empirical formula : Na₂Cr₂O₇
Further explanation
Given
170 g sample contains :
29.84 g sodium, 67.49 g chromium, and 72.67 g oxygen
Required
The compound's empirical formula
Solution
mol ratio of elements :
Na : 29.84 : 23 g/mol = 1.297
Cr : 67.49 : 51,9961 g/mol = 1.297
O : 72.67 : 16 g/mol = 4.54
Divide by 1.297
Na : Cr : O = 1 : 1 : 3.5 = 2 : 2 : 7
Explanation:
What is the average atomic mass of chlorine if it has isotopes of masses 36.96590 and 34.96885, which are 24.47% and 75.53% abundant, respectively?
The average atomic mass of chlorine is 35.0351 amu if it has isotopes of masses 36.96 and 34.96 respectively .
Why does chlorine have an atomic mass of 35.5?Chlorine has a relative atomic mass of 35. 5. The fact that chlorine can be found in two isotopes with atomic masses of 35 and 37 in a ratio of 3:1 makes its relative atomic mass possible. Because of its 35 relative atomic mass, this is the case.
Chlorine's average atomic mass is calculated as follows:average atomic mass = (M1 × 0.2447) + (M2 × 0.7553)
The following equations can be used to replace the masses of the two isotopes:
average atomic mass = (36.96590 × 0.2447) + (34.96885 × 0.7553)
= 8.96857 + 26.06653
= 35.03510 atomic mass units,
Chlorine element :The chemical element chlorine has the atomic number 17 and the symbol Cl. It is the second-lightest halogen and appears in the periodic table between bromine and fluorine. Most of its properties lie in between them. At room temperature, chlorine is a gas that is yellow-green.
Learn more about Average atomic mass :
brainly.com/question/3187640
#SPJ4
skeletal structure of (ch3)3cch(ch3)ch2ch2ch3
The skeletal structure of (CH3)3CCH(CH3)CH2CH2CH3 in drawn below.
The skeletal structure of (CH3)3CCH(CH3)CH2CH2CH3 refers to the arrangement of the carbon and hydrogen atoms in the molecule, excluding any non-essential atoms such as hydrogens bonded to nitrogens. The molecule has a total of 17 carbon atoms and 33 hydrogen atoms. The carbon skeleton consists of a linear chain of 9 carbon atoms, with 3 methyl groups (CH3) attached to the first, third, and seventh carbon atoms, and a branched chain of 8 carbon atoms attached to the ninth carbon atom. The branched chain consists of a propyl group (CH2CH2CH3) and a vinyl group (CH=CH2). This is the skeletal structure of (CH3)3CCH(CH3)CH2CH2CH3.
Learn more about skeletal structure:
brainly.com/question/29165067
#SPJ4
9. if you wanted to make glucose and fructose from sucrose, could you just put sucrose in a glass of water to cause hydrolysis of the sucrose? why or why not?
Yes, you could put sucrose in a glass of water to cause hydrolysis of the sucrose and make glucose and fructose. This process is called hydrolysis, where a sugar molecule is broken down into smaller sugar molecules using water.
In the case of sucrose, it is a disaccharide made up of glucose and fructose molecules joined together. When sucrose is added to water, the water molecules break the bond between glucose and fructose, causing them to separate. This results in the formation of glucose and fructose molecules in the water.
However, the hydrolysis of sucrose in water is not an immediate process. It requires the presence of an enzyme called sucrase, which is responsible for breaking down the sucrose into glucose and fructose. In the absence of sucrase, the hydrolysis of sucrose in water would be slow and incomplete.
To learn more about Glucose here:
https://brainly.com/question/397060#
#SPJ11
a solution is prepared by dissolving 15.8 g of mgcl2 in 255 g of water. what is the mole fraction of cl- in this solution? a,0.988 b,0.0232 c,0.0116 d,0,977
Option B is the correct answer
What is mole fraction ?
The mole fraction of a component in a mixture is a measure of the relative amount of that component in the mixture, expressed as a fraction of the total number of moles of all components in the mixture. The mole fraction is a unitless quantity that is used to describe the composition of a mixture in terms of the number of moles of each component present.
The mole fraction of a component i in a mixture can be calculated as follows:
X_i = n_i / (n_1 + n_2 + ... + n_n)
where X_i is the mole fraction of component i, n_i is the number of moles of component i, and n_1, n_2, ..., n_n are the number of moles of each of the other components in the mixture.
Change all to moles
mol of MgCl2 = mass MgCl2 / MW of MgCl2
MW of MgCl2 = 95.211 g/mol
mol of MgCl2 = 15.8 /95.211 = 0.1659 mol of MgCl2
mol of Mg+2 = mol of MgCl2 = 0.1659
mol of Cl- = 2 * mol of MgCl2 = 2*0.1659 = 0.3318
mol of water = mass water /MW water = 255/18 = 14.166 mol of water
total mol = mol of water + mol of Mg+2 + mol of Cl = 0.1659 +14.166 +0.3318= 14.6637
Then
mol fraction of Cl = mol of Cl- / total mol = 0.3318/14.6637 = 0.0226 = 0.023
To know more about mole fraction , click the given link below ;
https://brainly.com/question/14783710
#SPJ1
Which of the following amino acid side chains can form hydrogen bonds with each other, ultimately contributing to tertiary structure? Assume physiological pH. Asn and Val Ala and Pro Phe and Tyr Tyr and Gln Leu and Arg Asp and Ile
The pairs of amino acid side chains that can form hydrogen bonds with each other are: Asn and Gln, Tyr and Phe, and Asp and Glu.
Amino acid side chains can form hydrogen bonds with each other, which ultimately contributes to tertiary structure. Some common examples include:
Asn and Gln: Asn and Gln both contain amide groups (-CONH-) in their side chains, which can participate in hydrogen bonding.
Tyr and Phe: Tyrosine and Phenylalanine both contain aromatic rings in their side chains, which can participate in pi-stacking interactions and hydrogen bonding with other residues.
Asp and Glu: Aspartic acid and Glutamic acid both contain carboxyl groups (-COO-) in their side chains, which can participate in hydrogen bonding.
So, the pairs of amino acid side chains that can form hydrogen bonds with each other are: Asn and Gln, Tyr and Phe, and Asp and Glu.
Learn more about amino acids here:
https://brainly.com/question/28409615
#SPJ4
magnesium has three naturally occuring isotopes. the masses and bundances of the isotopes are given in the table below. what is the average atomic mass of mg?
According to the question,Average atomic mass of Mg = 24.3050.
What is the mass ?Mass is the measure of the amount of matter in an object. It is related to the concept of weight, which is the measure of the gravitational force that acts on an object. Mass can be measured in a variety of ways, including weighing, using a beam balance, or by using an instrument such as a spring scale. Mass is usually measured in units of kilograms or grams. Mass is an important concept in physics and is one of the properties used to describe an object's motion.
24Mg (78.99%)
25Mg (10.00%)
26Mg (11.01%)
Average atomic mass of Mg = 24.3050
24Mg*(78.99%) + 25Mg*(10.00%) + 26Mg*(11.01%) = 24.3050
To learn more about mass
https://brainly.com/question/837939
#SPJ4
for naoch3 identify each bond as polar covalent nonpolar covalent or ionic
The bond between Na and O in NaOCH3 is ionic. The bond between O and C in the molecule is polar covalent, and the bonds between C and H in the molecule are nonpolar covalent.
The NaOCH3 molecule is composed of three different types of bonds: Na-O, O-C, and C-H. The bond between sodium and oxygen is an ionic bond. Sodium is a metal and oxygen is a non-metal, and their electron configuration difference results in a transfer of electrons from sodium to oxygen. This results in the formation of sodium and oxygen ions, Na+ and O-, respectively. The O-C bond is a polar covalent bond, where the electron pair is shared between the two atoms but not equally. Oxygen is more electronegative than carbon, resulting in an uneven distribution of electrons, causing the bond to be polar. The C-H bond is a nonpolar covalent bond, as carbon and hydrogen have similar electronegativity values and thus the electron pair is shared equally between them.
Learn more about NaOCH3 here: brainly.com/question/30433999
#SPJ4
Complete question:
For NaOCH3, identify each bond as polar covalent, nonpolar covalent or ionic; NaO, OC, and CH.
Why is knowledge about the persistence of a chemical important when considering its
toxicity?
A. Persistence is a direct measure of the toxicity of a chemical and so would determine whether it is toxic or nontoxic.
B. Persistence is an indirect measure of the toxicity of a chemical; that is, high persistence means low toxicity.
C. Persistence measures how long a chemical remains in its present state in an area and, therefore, how long it might be a health concern.
D. Persistence is a measure of the number of carbons in an organic molecule, which is a direct measure of toxicity.
E. Persistence is a measure of the amount of a chemical present in a particular food chain.
The correct answer is C. Persistence measures how long a chemical remains in its present state in an area and, therefore, how long it might be a health concern.
Knowledge about the persistence of a chemical is important when considering its toxicity because it determines the length of time that the chemical will remain in the environment and potentially have a negative impact on human health and the environment. Persistence refers to how long a chemical remains in its present state, whether it be in soil, water, or air.
If a chemical has high persistence, it means that it is resistant to degradation and will remain in the environment for an extended period of time. This increases the potential for the chemical to accumulate in living organisms and cause harm.
On the other hand, if a chemical has low persistence, it means that it is rapidly degraded and poses a lower risk to human health and the environment.
In conclusion, understanding the persistence of a chemical is important when considering its toxicity because it provides information about how long the chemical will remain in the environment and potentially pose a threat to human health and the environment.
to know more about organic compund refer here
https://brainly.com/question/10504103#
#SPJ11
Balance the following chemical equation. C2H3CI+ 02 CO2+ H20+ HCI Assume the coefficient of HCl is 2. What is the balanced equation?
The balanced equation is: [tex]2C2H3Cl + 5O2 → 4CO2 + 2H2O + 2HCl[/tex]assuming the coefficient of HCl is 2.
Given the equation is: [tex]C2H3CI+ 02 = CO2+ H20+ HCI[/tex]
The number of atoms in each element on the left side of the equation must equal the number of atoms in each element on the right side of the equation for the equation to be considered balanced.
Dioxygen and Vinyl Chloride produce Carbon Dioxide, Water, and Hydrogen Chloride. Five moles of Dioxygen [O2] and two moles of Vinyl Chloride [C2H3Cl] react to produce two moles of Hydrogen Chloride [HCl], two moles of Water [H2O], and four moles of Carbon Dioxide [CO2]. It is a combustion as well as redox reaction which indicates an oxidation and reduction reaction at the same time.
To learn more about HCl click here https://brainly.com/question/24177034
#SPJ4
Calculate the molar mass of :
a) NH⁴
b) LiBr
The molar mass of NH₄ is 18 g/mole while that of compound of lithium bromide is 86.84 g/mole.
What is molar mass?Molar mass of a compound or a molecule is defined as the mass of the elements which are present in it.The molar mass is considered to be a bulk quantity not a molecular quantity. It is often an average of the of the masses at many instances.
The molecular mass and formula mass are used as synonym for the molar mass.It does not depend on the amount of substance which is present in the sample.It has units of gram/mole.
Molar mass of NH₄= 14+ 4= 18 g/mole while that of lithium bromide =6.941+ 79.904=86.84 g/mole.
Learn more about molar mass,here:
https://brainly.com/question/12127540
#SPJ1
__________ is always involved in hydrolysis reactions.
Water (H2O) is always involved in hydrolysis reactions.
Hydrolysis is a chemical reaction in which water is used to break a bond between two atoms or molecules. In a hydrolysis reaction, water molecules are added to the reactants, with one molecule of water breaking apart into a hydrogen ion (H+) and a hydroxide ion (OH-). These ions then participate in the reaction, effectively breaking the bond between the two reactants and forming two new products.
Thus, water is always involved in hydrolysis reactions, serving as both the source of the reactive hydrogen and hydroxide ions and the solvent in which the reaction takes place.
You can learn more about hydrolysis reactions at
https://brainly.com/question/4352413
#SPJ4
how are temperature and the boiling point related? in your own words, explain how water can boil at room temperature.
Temperature and boiling point are directly related. In solutions, ΔTb = i×Kb×m where elevation in boiling point is directly related to molality as well.
A substance's boiling point is the temperature at which it changes states from a liquid to a gas. This phase change occurs when the liquid's vapour pressure is equal to the atmospheric pressure and the temperature at which this occurs is known as the boiling point. At standard atmospheric pressure(1.01 bar), the normal boiling point of water is 100°C (100+273 = 373K). Temperature and boiling point are directly related. When the temperature of a substance rises, so does its vapour pressure. When the liquid's vapour pressure reaches atmospheric pressure, it begins to boil and turn into a gas. However, changes in atmospheric pressure can affect a substance's boiling point. Atmospheric pressure is lower than that at sea level at higher altitudes. Hence, water at high altitudes boils at lower than 100°C temperature, and in some cases, at room temperature.
To know more about boiling point, click here : https://brainly.com/question/1530966
#SPJ4
The molecular weight of ethanol (CH3CH2OH) is
46 and its density is 0.789 g/cm3.
A. What is the molarity of ethanol in beer that is 5%
ethanol by volume? [Alcohol content of beer varies from
about 4% (lite beer) to 8% (stout beer).]
B. The legal limit for a driver’s blood alcohol content
varies, but 80 mg of ethanol per 100 mL of blood (usually
referred to as a blood alcohol level of 0.08) is typical. What
is the molarity of ethanol in a person at this legal limit?
C. How many 12-oz (355-mL) bottles of 5% beer could
a 70-kg person drink and remain under the legal limit? A
70-kg person contains about 40 liters of water. Ignore the
metabolism of ethanol, and assume that the water content
of the person remains constant.
The molecular weight of ethanol (CH3CH2OH) is 46 and its density is 0.789 g/cm3
A. To calculate the molarity of ethanol in beer that is 5% ethanol by volume, we can use the following conversion:
5% ethanol by volume = 5 g ethanol / 100 mL beer
Since the density of ethanol is 0.789 g/cm3, this is equivalent to:
5 g ethanol / 100 mL beer = 5 g ethanol / (0.789 g/mL * 100 mL) = 0.0632 M ethanol
B. To calculate the molarity of ethanol in a person at a blood alcohol level of 0.08, we can use the following conversion:
80 mg ethanol / 100 mL blood = 80 mg ethanol / (0.100 L blood)
Since the molecular weight of ethanol is 46 g/mol, this is equivalent to:
80 mg ethanol / (0.100 L blood) = 80 mg ethanol / (0.100 L) * (1 g / 1000 mg) / (46 g/mol) = 0.0043 M ethanol
C. To calculate how many 12-oz (355-mL) bottles of 5% beer a 70-kg person can drink and remain under the legal limit, we can first calculate the volume of ethanol consumed and then compare it to the volume of blood in the person:
Volume of ethanol in one bottle of beer = 5 g ethanol / 0.0632 M ethanol = 79.2 mL ethanol
Volume of blood in a 70-kg person = 70 kg * 0.06 L/kg = 4.2 L
Total volume of ethanol that a 70-kg person can drink = 4.2 L * 0.0043 M ethanol / 0.0632 M ethanol = 0.48 L = 657.2 mL = 18.5 bottles
Therefore, a 70-kg person can drink 18.5 12-oz (355-mL) bottles of 5% beer and remain under the legal limit.
Learn more about ethanol here:
https://brainly.com/question/25002448
#SPJ4
a solution where no additional solute will dissolve; the solution is at equilibrium between dissolved and undissolved solute.
A solution where no additional solute will dissolve is known as a saturated solution. In this type of solution, an equilibrium exists between the dissolved solute and undissolved solute, meaning that the maximum amount of a given solute has been dissolved into the solvent.
Adding more solute will not change the concentration of the solution; the same amount of solute will remain in solution.
A saturated solution is a type of solution where the maximum amount of a given solute has been dissolved into the solvent. In this type of solution, an equilibrium exists between the dissolved solute and undissolved solute, meaning that no additional solute can be dissolved into the solvent. The amount of solute in the solution remains constant and does not increase, even if more solute is added. This is because the maximum amount of solute that can dissolve in the solvent has already been reached.
Learn more about solutions in equiluibrium:
https://brainly.com/question/30399396
#SPJ4
What is the formula mass (molar mass) of sucrose (C12H24O8), a fat?
Responses
44 g/mol
280 g/mol
296 g/mol
386 g/mol
The formula mass (molar mass) of sucrose (C12H24O8), a fat is 296 g/mol. Therefore, option C is correct.
What is molar mass ?Molecular weight M is a chemical compound's mass divided by its amount of substance measured in moles. MB = m/nB, where m is the total mass of a pure substance sample and nB is the amount of substance B given in moles.
An element's characteristic molar mass is simply its atomic mass in g/mol. To calculate the molar mass of a compound with multiple atoms, add all the constituent atoms' atomic masses.
The molar mass of sucrose (C12H24O8)
= 12 × 12 + 1 × 24 + 16 × 8
= 144 + 24 + 128
= 296 g/mol
Thus, option C is correct.
To learn more about the molar mass, follow the link;
https://brainly.com/question/12127540
#SPJ1
_____ is the smallest chemical unit of a type of pure substance.
(a) A cell
(b) A molecule
(c) An amino acid
(d) An atom
(e) A proton
Borneol can also be oxidized to camphor using other oxidizing agents, such as sodium dichromate in acid. How do you do a balanced equation for this oxidation (Cr2O7 2- is reduced to Cr3+) and calculate the weight of Na2Cr2O7*2H2O should be needed (theoretically) to oxidize 0.50 g of borneol?
The balanced chemical equation for the oxidation of borneol to camphor using sodium dichromate in acid is:
[tex]2C_1_0H_1_8O+16H^+10Cr_2O_7^2^- - > 2C_1_0H_1_6O+10Cr^+^3+8H_2O+16H^+[/tex]
To calculate the amount of sodium dichromate (Na2Cr2O7 * 2H2O) needed to oxidize 0.50 g of borneol, you can use the mole ratio of reactants. The balanced equation tells us that for every 1 mole of borneol, 10 moles of sodium dichromate are needed.
The molar mass of borneol is 154 g/mol, so 0.50 g is equal to 0.50/154 moles. To find the amount of sodium dichromate needed, multiply this mole amount by 10, then convert it to grams by multiplying by the molar mass of Na2Cr2O7 * 2H2O (298 g/mol).
To know more about chemical equation click on the link below:
https://brainly.com/question/30087623#
#SPJ11
Rhodium has an fcc crystal structure, an atomic radius of 0. 1345 nm and an atomic weight of 102. 9 g/mol. Calculate the density of rhodium in grams per cubic centimeters.
4.37 g/cm³ is the density of rhodium in grams per cubic centimeters.
What is the atomic weight of rhodium?
The atomic weight of rhodium is 102.9 g/mol. This means that one mole of rhodium atoms has a mass of 102.9 grams. Rhodium is a rare, silvery-white metal that is highly reflective and has a high melting and boiling point. It is often used in catalytic converters, electroplating, and jewelry. The atomic weight of rhodium is an important factor in determining its physical and chemical properties.
To calculate the density of rhodium, we need to divide its atomic weight by its volume. The volume of an fcc crystal can be found by using the formula:
V = a^3/2
where a is the atomic radius. Substituting the values, we get:
V = (0.1345 nm)^3/2 = 2.36 x 10⁻²³ cm³ .
Therefore, the density of rhodium is 102.9 g/mol / 2.36 x 10⁻²³ cm³ = 4.37 g/cm³.
To know more about Rhodium visit:
brainly.com/question/19756190
#SPJ4
which kinds of chemicals were found to be produced in the flasks at the conclusion of the miller-urey experiment?
glycine (simple amino acids, simple carbohydrates, and simple proteins (nucleic acids)) was produced in the flasks at the conclusion of the miller-urey experiment.
The Miller-Urey experiment, was conducted to test the idea that organic molecules could be synthesized in a reducing environment. They assembled an atmosphere similar to what is thought to have existed on primitive Earth. They added a mixture of ammonia, methane, and hydrogen sulfide to the water. There was no oxygen. This was kept at a temperature just below 100°C and a spark passed through the gas mixture to simulate lightning. By the end of the week, 15% of the carbon (from methane) had been converted to simple organocarbon compounds.
To learn more about miller-urey experiment, refer:
https://brainly.com/question/12887279
#SPJ4
You can use one-snip test to identify monophyletic groups − meaning that if you cut any branch on a tree, everything that falls off is a monophyletic group. why is this valid?
The one-snip test is a way to identify monophyletic groups in a phylogenetic tree, which is a diagram that shows the evolutionary relationships between species.
A monophyletic group is defined as a group of organisms that share a common ancestor and all of its descendants. When using the one-snip test, a branch is selected and cut, and everything that falls off is considered a monophyletic group. This test is valid because it ensures that all descendants of the cut branch share a common ancestor and are therefore considered a monophyletic group. If the test produces a monophyletic group, it means that the branching pattern in the tree correctly represents the evolutionary relationships between species, and that the group can be considered a clade, or a group of organisms with a shared ancestry.
Learn more about one-snip test:
brainly.com/question/12704015
#SPJ4