Which model below shows the positions of the Sun, Moon, and Earth that have the greatest effect on ocean tides?

Answer:

electrons

Explanation:

because it electrons

Hi there!

Recall Newton's Second Law:

[tex]\large\boxed{\Sigma F = ma}}[/tex]

∑F = Net force (N)

m = mass (kg)

a = acceleration (m/s²)

We are already given the mass and acceleration, so we can plug these values into the equation:

∑F = 1600 · 4.5 = 7200 N

Explanation:

As you can see in the picture, we want the swimmer to go on a straight line, so the speed of the water must be equal to the speed of the swimmer along the x-axis. We also know the value of v, so we can calculate the of the cosine of the angle (alpha) between Vx and V. Thanks to the fundamental relation of gioniometry (cos^2(x) + sin^2(x) = 1) we can find the sine of alpha and calculate Vy. With Vy we can calculate the time that the swimmer will use for reaching the dock: s = Vy * t => t = s/(Vy).

I'll let you do all the calculations, you just have to plug in values.

a)The direction that she must aim herself through the water to arrive at the dock will be 73.7°.

b)The time it takes for the swimmer to cross the river will be 240 seconds.

Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while v for the final speed. its si unit is m/sec.

Given data;

The maximum speed of the swimmer In still water,v=1.25m/s.

Speed of river = 0.35m/s [E]

α is the direction that she must aim herself through the water to arrive at the dock.

t is the time it takes for the swimmer to cross the river

The distance from the starting point to the dock is,s = 300 m

If the swimmer were to swim straight, the water's speed along the x-axis would have to match that of the swimmer.

[tex]\rm v_w = v_x = 0.35 \ m/sec[/tex]

α is the angle between vx and v

The value of the

[tex]\rm cos \alpha = \frac{v_x}{v} \\\\ \alpha = cos ^{-1}(\frac{0.35}{1.25} )\\\\ \alpha = 73.7 ^0[/tex]

The time that the swimmer will use for reaching the dock;

s = V×t

t = s/(v)

t=300 m / 1.25 m/sec

t = 240 seconds

Hence, the direction that she must aim herself through the water to arrive at the dock. and it takes for the swimmer to cross the river will be 73.7° and 240 seconds respectively.

To learn more about the speed refer to the link;

https://brainly.com/question/7359669

#SPJ2

Answer:

I believe it might be point A since the question ask what will result in the ln a largest increase in potential energy

Explanation:

point A since the question ask what will result in the ln a largest increase in potential energy

The energy can be defined as  ability to work or produce action and / or movement and manifests itself in many different ways, such as body movement, heat, electricity, etc.

The different types of energy include Kinetic energy which is associated with the movement of bodies. Potential energy which is  stored by virtue of a body's position relative to its surface is also called gravitational potential energy.

Thermal Energy or Heat can be defined as the energy  associated with the kinetic energy of the molecules that make up an element, it can be manifested if there is a temperature difference between two bodies.

Chemical energy released or formed from chemical reactions, Solar energy from sunlight. This form of energy is used to generate electricity through photovoltaic plates, for example.

For more details regarding energy, visit

brainly.com/question/28869293

#SPJ2

Answer:

A major difference between tangential acceleration and centripetal acceleration is their direction. Centripetal means “center seeking”. ... Tangential acceleration results from the change in magnitude of the tangential velocity of an object. An object can move in a circle and not have any tangential acceleration.

The direction of acceleration is a key distinction between tangential acceleration and centripetal acceleration. Centripetal is defined as "center-seeking." The amount of an object's tangential velocity changes, which causes tangential acceleration. Without experiencing any tangential acceleration, an item can move in a circle.

Acceleration is the rate at which the speed and orientation of a moving object change over time. When a spot or object moves faster or slower along a straight line, it is said to be accelerated. Even though the speed is constant, motion on a circle accelerates so because the direction is always shifting. Both by and to acceleration for all other types of motion.

It is a vector quantity because it has both magnitude and direction.

Any object's rotation experiences tangential acceleration, which is the speed at which the tangential velocity fluctuates. When an object is moving, it behaves in a tangential direction. An object moving in a circle will also experience the very same tangential velocity action.

To know more about Acceleration:

https://brainly.com/question/12550364

#SPJ6

Answer:

F = G M m / R^2 gravitational force on planet of mass m.

None of these quantities change in the given hypothesis so

there will be no change in the orbit of mass m

Answer:the answer is b

Explanation:

This is because in an ionic bond negative and positive bonds are present

Answer:

[tex]momentum =mv \\ 50 = 5v \\ v = \frac{50}{5} \\ v= 10m. {s}^{ - 1} [/tex]

When the planet is closest to the Sun, speed v and kinetic energy are the highest, and gravitational potential energy is the lowest. When the planet moves farther away, the speed and kinetic energy decrease, and the gravitational potential energy increases.

Answer:

Usually, a solution can have several criteria and constraints. Even though all are important, some criteria are more important than others. The same holds true for constraints. But what do you do if it's impossible for a solution to cover every criterion while avoiding every constraint? In cases like this, you can use prioritization. Listing criteria and constraints based on priority shows the relative importance of each. You will need to prioritize the criteria and constraints for each sub-problem so that you can design a solution for each one individually. Prioritization can help you compare two different possible solutions. For example, the criterion that cars travel at 15 mph through the neighborhood might be a higher priority than the constraint that homeowners are only willing to spend $10,000 on this issue. If this is the case, you would want to generate solutions that also follow the priority in mind. All criteria are important, but engineers must sometimes make a trade-off, which is a compromise or change in one or more criteria or constraints so that they can be met at the same time. This is where prioritization comes in handy as it helps determine the trade-offs. A solution that is doing a better job of meeting one criterion may result in not completely meeting another criterion. Prioritization will help you choose which solution to go with.

Explanation:

I got this from quizlet :)

D)

Explanation:

Coz the position changes with time but the position change is not constant throughout time So, D) does not have constant velocity

Answer:

wat

Explanation:

Answer:

h = v 0 y 2 2 g . This equation defines the maximum height of a projectile above its launch position and it depends only on the vertical component of the initial velocity.

Explanation:

Answer:

C.the coefficient of friction

Explanation:

Hope this helps. can i have brainliest thanks!

Answer:

the volume changes overtime

sometimes because of weather, temperature ...

Explanation:

Answer: the gravitational attraction on the Moon is much less than it is here on Earth, and a person weighs less on the Moon.

Explanation:

Answer:

The final velocity of the canoe is -14.1 m/s or 14.1 m/s to the right.

Hope you could get an idea from here.

Doubt clarification - use comment section.

Answer:

1.67m

5m/s

Explanation:

Wavelength of the wave = 3m

Speed of the wave  = 5m/s

The distance between crest and the adjacent trough of water waves is known as the wavelength of a wave.

 To find the frequency ;

        V = f∧

V is the speed of the wave

f is the frequency

∧ is the wavelength

  Insert the parameters and find the frequency;

        f  = V/ ∧   = 5 / 3  = 1.67Hz

The rate at which the wave passed a given point is the speed of the wave and it is 5m/s

The speed at which the arrow would be launched is 133.42 m/s

The work-energy theorem asserts that the net work done applied by the forces on a particular object is equivalent to the change in its kinetic energy.

The equation for the work-energy theorem can be computed as:

[tex]\mathbf{W =\Delta K.E}[/tex]

[tex]\mathbf{F\Delta x =\dfrac{1}{2} mv^2}[/tex]

where;

From the above equation, let make speed(v) the subject of the formula:

∴

[tex]\mathbf{v = \sqrt{\dfrac{2(F \Delta x)}{m}} }[/tex]

[tex]\mathbf{v = \sqrt{\dfrac{2(267 \times 0.60)}{0.018}} }[/tex]

v = 133.42 m/s

Learn more about the work-energy theorem here:

https://brainly.com/question/17081653

Answer:

1) Average velocities:

Given the magnitudes of 2 velocity vectors, in different time instants, the average velocity is defined as the difference of the 2 velocity magnitudes, in absolute value, divided by the interval of time occuring between the measurement of the velocity magnitudes.

2) Average acceleration

Given the magnitudes of 2 acceleration vectors, in different time instants, the average acceleration is defined as the difference of the 2 acceleration magnitudes, in absolute value, divided by the interval of time occuring between the measurement of the acceleration magnitudes.

As you see the definitions are pretty similar.

Note: I didn't copy-paste this answers from any other site.

Answer:

It is direct proportionality. The greater the mass, the greater is the gravitational potential energy. The equation for GPE is : GPE = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height above the ground. As you can see GPE is directly proportional to mass, and height. KT.

Explanation:

Gravitational potential energy is a function of both the mass of your system and the mass of the thing generating the gravity field around your system.

The relationship is linear, which means that if you multiply or divide one of the masses by some number but leave everything else the same, you multiply or divide the potential energy by the same number. A 3kg mass has three times the gravitation potential energy of a 1kg mass, if placed in the same location.

Answer:

[tex]10 \times 20 - 5 \\ \\ = 200 - 5 \\ = 195[/tex]

Answer:

2nd option at the most

Explanation:

leave a thanks if helped

Answer: Solids have definite shapes and liquids fill their containers.

Explanation: Liquids have got further apart molecules than solids, so the liquid molecules have a higher degree of locomotion than solid molecules, hence able to fill the container though without a definite volume, which is not the case for solid molecules.

Their combined speed will be 1m/s

Given the following parameters;

If the player collides and stick together, the combined speed is expressed as;

Hence their combined speed will be 1m/s

Learn more on collision here: brainly.com/question/7538238

Gravitational force is responsible for how magma flows and rocks stack up on top of one another.

Hence, it is the gravitational force that is responsible for how magma flows and rocks stack up on top of one another.

Learn more about gravitational force: https://brainly.com/question/24783651

Answer:

The mass of the object is 11.2 Kg.

Hope you could get an idea from here.

Doubt clarification - use comment section.

The mass of an object that has a weight of 110 N is 11.2kg.

The weight of an object is defined as the force that acts on the object due to gravity. It is a vector quantity in some cases such as when the force of gravity acts on an object but it is also a scalar quantity where the force of gravity has a magnitude.

Weight is the gravitational force of attraction on an object due to the presence of another heavy object, such as the Earth or the Moon. It is expressed by multiplying the mass by the gravitational acceleration.

In above case,

Weight (W) = 110 N

Acceleration due to gravity (g) = 9.8 m/s^2

Let the mass of the object be m.

By using the formula,

W = mg,

[tex]110 N = 9.8 m/s^2 *m\\m = 110 N/ 9.8 m/s^2[/tex]

so, m = 11.2 Kg

Thus, the mass of an object that has a weight of 110 N is 11.2kg.

Learn more about Weight, here:

brainly.com/question/23312072

#SPJ2

Answers:

1. Newton's second law states that the force on an object is equal to its mass times its acceleration. Equation: F = ma, or force is equal to mass times acceleration.

2.

3. a = 0.25 m/s^2

4. a = 0.4 m/s^2

Answer:

The answer is 9.4 m/s

Explanation:

Because you add 5.0 + 4.5= 9.4