which metal has the highest temperature?

The velocity with which the sandbag strikes the ground is  -28.44m/s (downward).

Given the initial velocity of balloon (u) = 5m/s

The height of balloon (h) = 40m

The acceleration is due to the gravity = g = 9.8m/s^2 acting downwards.

A sandbag is released from height h of the balloon.

The velocity of sandbag as it reaches the ground = v

We know that from Newtons laws of motion v = u + at

We know that the bag strikes the ground at y =0m,

then y = h + ut - 1/2gt^2

0 = 40 + 5t - 1/2 x 9.8 x t^2

t = 3.41s

As we know that v = u - gt

v = 5 - 9.8 x 3.41 = -28.44m/s

To learn more about velocity click here https://brainly.com/question/28738284

#SPJ4

complete question: A hot-air balloonist, rising vertically with a constant velocity of magnitude 5.00m/s releases a sandbag at an instant when the balloon is 40.0m above the ground. With what magnitude of velocity does it strike the ground?

Instantaneous velocity and instantaneous speed are related but distinct concepts in physics. Understanding the difference between these two measures is important for understanding the motion of objects, including cars.

Instantaneous velocity refers to the velocity of an object at a specific point in time. It is a vector quantity that includes both the magnitude (speed) and direction of the object's motion. This means that if an object is moving, its instantaneous velocity will be different at different points in time as its speed or direction may change.

On the other hand, instantaneous speed refers to the magnitude of an object's velocity at a specific point in time, without takinin time, without taking into account the direction of motion. This meang into account the direction of motion. This mean that the instantaneous speed will always be a positive scalar value, regardless of the direction of motion.

So, to answer the question, the car's instantaneous velocity component can be different from its instantaneous speed when the car changes direction. If the car is turning, its direction of motion is changing, so its instantaneous velocity will change as well, even if its speed remains constant. However, the instantaneous speed will not change in this case, as it only takes into account the magnitude of velocity, not its direction.

To summarize, the difference between instantaneous velocity and instantaneous speed has to do with the direction of motion. Instantaneous velocity includes information about the direction of motion, while instantaneous speed only includes information about the magnitude of velocity.

Here you can learn more about Instantaneous velocity and instantaneous speed

https://brainly.com/question/28837697#

#SPJ11

The extra mass of the magnesium oxide comes from then magnesium nitride that is also formed.

If we look at the law of the conservation of mass, we know from that very law that the masses of the substances at the beginning of the reaction must be the same as the masses of the substances at the end of the reaction and this is because the mass of the reaction is conserved.

Given the fact that magnesium does combine with nitrogen to give magnesium nitride in the reaction then the mass of the product would be higher.

Learn more about mass:https://brainly.com/question/13383562

#SPJ1

When water is boiling, its temperature remains constant because the heat being added to the system is being used to convert the liquid water into gaseous water vapor.

The temperature remains constant because the heat being added is being used to change the phase of the water, not to increase its temperature. The boiling point of water is determined by the pressure of the system and the temperature of the surrounding environment. When the heat input is sufficient to overcome the vapor pressure of the liquid water, it will begin to boil and form bubbles of water vapor. The temperature of the boiling water will remain constant until the heat input is increased or the pressure is decreased, causing the boiling point to change.

Find out more about Temperature

brainly.com/question/28030895

#SPJ4

The direction of force in Coulomb's law is determined by the direction of the electric field created by the charges.

Coulomb's law states that the force between two charged particles is proportional to the product of their charges and inversely proportional to the square of the distance between them. The direction of this force is determined by the direction of the electric field created by the charges.

The electric field is defined as the force per unit charge and can be visualized as the field lines that emanate from a charged particle. The direction of the electric field is always away from a positive charge and towards a negative charge, and the force between two charges will be in the same direction as the electric field at the point where they are located.

To know more about force, click here.

https://brainly.com/question/13191643

#SPJ4

(a) To find the distance PQ, we can use the kinematic equation:

d = vi×t + 0.5×a×t².

where d is the distance, vi is the initial velocity (in this case 12 m/s horizontally), t is the time (0.32 s), and a is the acceleration due to gravity (9.8 m/s^2 downward).

Since the initial velocity is horizontal, the only acceleration acting on the dart is gravity, and we only need to consider the vertical displacement of the dart.

d = vi×t + 0.5×a×t²  d = 0 + 0.59.8×0.32²   d = 0.32 m

So the distance PQ is 0.32 m.

(b) To find the distance from the dart board where the dart was released, we need to find the horizontal displacement of the dart. We can use the same kinematic equation, but this time consider only the horizontal component of the initial velocity.

d = vi×t d = 12 m/s × 0.32 s   d = 3.84 m

So the dart was released 3.84 m away from the dart board.

To know more about displacement  click here:

brainly.com/question/30087445

#SPJ4

vector → has a magnitude of 25 units and makes 20° with the x-axis. vector → has a magnitude of 20 units and makes 60° with the x-axis.The magnitude of the vector is 25 Units.

The magnitude of a vector is the absolute value of its length and is independent of its direction. In this case, the magnitude of the vector is 25 units, regardless of the angle it makes with the x-axis. Mathematically, this can be expressed as:

[tex]|vector| = √\sqrt(25^2) = 25[/tex]

Therefore ,The magnitude of the vector is 25 Units.

A vector is a quantity with both magnitude and direction. It is often represented by an arrow whose length is proportional to the magnitude of the quantity and whose direction is the same as that of the quantity. A vector does not have location, while having magnitude and direction. In other words, a vector's shape remains unaltered if it is shifted parallel to itself as long as its length is unaltered.

learn more about vector Refer:brainly.com/question/30512630

#SPJ4

The reverse of a spontaneous reaction is typically non-spontaneous, meaning it requires input of energy in the form of heat, light, or work to occur.

A spontaneous reaction is a chemical reaction that occurs on its own, without the input of external energy, and proceeds in a direction that increases the system's overall disorder, or entropy. This means that the reaction is thermodynamically favored and proceeds in the direction that leads to an increase in the randomness of the system. Spontaneous reactions can release energy in the form of heat or light, which can be harnessed in various applications.

To know more about randomness, visit:

https://brainly.com/question/28207356

#SPJ4

The equation for motion with constant acceleration is mentioned below.

What is motion ?

The way a body's orientation or position changes throughout time. Translation is the action of moving along a line or curve.  When an object's position alters over time, we say it is in motion. By mentioning a reference point, we can indicate where an object is located. There is relative motion. An object's distance is stated to be the sum of the paths it has traveled.

What is acceleration?

Acceleration was the representation rate In a change of velocity because the acceleration always depends on the object's speed. Acceleration determines the rate of the particles. Acceleration is the vector quantity. It is a vector quantity, but it has both extent and movement. Newton's law also has the acceleration of the magnitude described. The m.s-2 is the standard unit for acceleration.

A = v v 0 t is a real equation. From this we can infer that at a certain time, if the difference between the starting and end velocity is minimal, the acceleration is modest and approaches zero in the limit when the initial and final velocities are equal.

Therefore, equation for motion with constant acceleration is mentioned above.

Learn more about motion from the given link.

https://brainly.com/question/26083484

#SPJ4

The scuffing of your feet on a dry day is an example of a triboelectric effect.

The triboelectric effect, also known as triboelectric charging, is a type of contact electrification in which certain materials become electrically charged after coming into contact with a different material. This occurs when electrons are transferred between the materials when they come into contact and separate. Common examples of the triboelectric effect include static electricity when a person scuffs their feet on carpet and then touches a metal doorknob, or when a balloon is rubbed against a person’s hair and then sticks to a wall. The triboelectric effect is a key component of many everyday items such as batteries, capacitors, and paint.

The scuffing of your feet on a dry day is an example of a triboelectric effect. This is when two different materials come into contact and electrons move from one material to another. This can cause a buildup of electric charge on one of the materials. In this case, the electrons move from the carpet to your feet, giving your feet a charge of -55 µC.

To learn more about triboelectric effect

https://brainly.com/question/30309159

#spj4

Answer:

Social-culture

Explanation:

The rope is pulled on the block with a force of about 13.04 N on with a force of f = 15 n and alpha be 30 degrees.

The force pulling on the block can be calculated using the component of the force in the direction of the block. To find this component, you can use the cosine function, as follows:

f block = f * cos(alpha) = 15 * cos(30) = 15 * sqrt(3) / 2 = about 13.04 N

So, the rope pulls on the block with a force of about 13.04 N.

The force of the rope pulling on the block is dependent on the angle between the force applied to the rope and the direction in which the block is being pulled. The force applied to the block can be found by resolving the force of the rope into its components along the x and y axes.

The horizontal component of the force (parallel to the x axis) will be equal to the force applied to the rope times the cosine of the angle between the force and the x axis.

The vertical component of the force (parallel to the y axis) will be equal to the force applied to the rope times the sine of the angle between the force and the y axis.

The magnitude of the force applied to the block will be equal to the square root of the sum of the squares of the horizontal and vertical components.

So, in this case, the force of the rope pulling on the block can be calculated using the horizontal and vertical components and the magnitude of the force can be found using the Pythagorean theorem.

To know more about force please refer:

https://brainly.com/question/13191643

#SPJ4

Coulomb's law determines how much of an electric force is exerted on a charge.

According to Coulomb's law, the electric force between two charges is inversely proportional to their distance from one another and directly proportional to the product of their respective magnitudes. It can be stated mathematically as:
F = k * q1 * q2 / r^2
where F is the strength of the electric force, k is the Coulomb's constant (8.99 x 109 N* m2/C2), q1 and q2 are the sizes of the charges, and r is the space between them. The direction of the force is along the line joining the two charges, and depending on the signs of the charges, it may be either attracting or repulsive.

Learn more about electric force here:

https://brainly.com/question/2526815

#SPJ4

The velocity of the particle when t = 6 s is 0 m/s, and its position when t = 11 s is 165 m.

To find the velocity of the particle when t = 6 s, we need to integrate the acceleration function with respect to time. The velocity function v(t) is the indefinite integral of the acceleration function a(t) with respect to time.

v(t) = ∫a(t) dt = ∫(2t - 6) dt = t² - 6t + C

where C is the constant of integration. To find the value of C, we need to use an initial condition, such as the velocity of the particle when t = 0. If the particle starts from rest, then v(0) = 0, so we can find the value of C:

0 = 0² - 6 × 0 + C

C = 0

Therefore, the velocity function is:

v(t) = t² - 6t

So the velocity of the particle when t = 6 s is:

v(6) = 6² - 6 × 6 = 0

To find the position of the particle when t = 11 s, we need to integrate the velocity function with respect to time. The position function x(t) is the indefinite integral of the velocity function v(t) with respect to time.

x(t) = ∫v(t) dt = ∫(t² - 6t) dt = (1/3)t³ - 6(1/2)t² + C

where C is the constant of integration. To find the value of C, we need to use an initial condition, such as the position of the particle when t = 0. If the particle starts from rest, then x(0) = 0, so we can find the value of C:

0 = (1/3) × 0³ - 6(1/2) × 0² + C

C = 0

Therefore, the position function is:

x(t) = (1/3)t³ - 6(1/2)t²

So the position of the particle when t = 11 s is:

x(11) = (1/3) × 11³ - 6(1/2) × 11² = 165 m.

Therefore, the velocity of the particle when t = 6 s is 0 m/s, and its position when t = 11 s is 165 m.

To know more about constant of integration, visit:

https://brainly.com/question/29073472

#SPJ4

The complete question is as follows:

The velocity of the particle when t = 6 s is 0 m/s, and its position when t = 11 s is 165 m.

What is the velocity function?

To find the velocity of the particle when t = 6 s, we need to integrate the acceleration function with respect to time. The velocity function v(t) is the indefinite integral of the acceleration function a(t) with respect to time.
v(t) = ∫a(t) dt = ∫(2t - 6) dt = t² - 6t + C
where C is the constant of integration. To find the value of C, we need to use an initial condition, such as the velocity of the particle when t = 0. If the particle starts from rest, then v(0) = 0, so we can find the value of C:
0 = 0² - 6 × 0 + C
C = 0
Therefore, the velocity function is:
v(t) = t² - 6t
So the velocity of the particle when t = 6 s is:
v(6) = 6² - 6 × 6 = 0
To find the position of the particle when t = 11 s, we need to integrate the velocity function with respect to time. The position function x(t) is the indefinite integral of the velocity function v(t) with respect to time.
x(t) = ∫v(t) dt = ∫(t² - 6t) dt = (1/3)t³ - 6(1/2)t² + C
where C is the constant of integration. To find the value of C, we need to use an initial condition, such as the position of the particle when t = 0. If the particle starts from rest, then x(0) = 0, so we can find the value of C:
0 = (1/3) × 0³ - 6(1/2) × 0² + C
C = 0
Therefore, the position function is:
x(t) = (1/3)t³ - 6(1/2)t²
So the position of the particle when t = 11 s is:
x(11) = (1/3) × 11³ - 6(1/2) × 11² = 165 m.
Therefore, the velocity of the particle when t = 6 s is 0 m/s, and its position when t = 11 s is 165 m.

To know more about constant of integration, visit:
https://brainly.in/question/22664348
#SPJ4

The complete question is as follows:

Answer: good depending on what the robot is doing

Explanation:

Robots replacing people in some spheres of life would ensure that many dangerous jobs are taken over so that human casualties would significantly decrease such as mining.However, in a death to death situation leaving it up to a robot can be very one sided to some people and can cause two sides of an argument to arise. Some saying that the robot should have 'killed' one choice and some would say the other choice or the original choice the robot chose.

For example a self driving car, comes in path to either choose to drive into a innocent person on the side walk killing them, a brick wall killing the passengers in the car, the car in front killing the people in the front car or a harmless stray dog.

Humans have that choice as a quick decision to make at the spur of the moment as they deem fit. However if the robot decides to crash into the dog some may say that they would have crashed into the car in front. ect.

Overall, yes there are some places where robots can replace people and it will be a positive result, while there are other places where a robot taking over a persons 'job' could be a negative result.

"The expression for the total time of flight when the object is released from ground level is t = (2u sinθ)/(g)."

Applying the second kinematic equation yields the expression for the total duration of flight, as given below.

As the object is released from a height of h,

h = vt + ¹/₂ gt²

where;

h is said to be the height of fall of the object

v is the initial vertical velocity of the object

g is acceleration due to gravity

t is the time of flight

As the ball is elevated above the ground,

t = (2u sinθ)/(g)

where,

u is the initial velocity

θ is the direction of the velocity

g is acceleration due to gravity

The total amount of time an object spends in the air is hence it's time of flight.

To know more about time:  

https://brainly.com/question/30438077

#SPJ4

The result of the calculation should be measured with three significant figures:

83.05 (rounded to three significant figures)

In this case, both 8500 kg and 102.1 kg have three significant figures.

The calculation is:

(8500 kg) / (102.1 kg) = 83.053

Measurement is the process of determining the size, amount, or degree of a physical quantity. It is an essential aspect of science and engineering, as well as everyday life. Measurement is used to quantify the properties of objects and substances, such as length, weight, temperature, and time.

The measurement process involves choosing a unit of measurement, such as meters, grams, or seconds, and then comparing the physical quantity being measured to that unit. The result of a measurement is a numerical value, which can be used to make comparisons and draw conclusions about the physical quantity being measured.

Measurements are often used to create models and simulations, and to make predictions about future events. The accuracy and precision of measurements are important considerations, as small variations in the measurement process can result in significant differences in the final result. Measurement is a fundamental aspect of science and engineering, and it plays a critical role in many areas of human activity, from manufacturing and construction to medicine and communication.

To learn more about Measurement visit here:

brainly.com/question/17940519

#SPJ4

The argument that best supports the student's claim is that a charged particle creates an electric field around it, which can exert a force on other charged particles within its space.

An electric field is a field of force that surrounds a charged particle and extends through the space around it. The strength of the electric field at a given point is proportional to the amount of charge at the source and decreases as the distance from the source increases. When a charged particle is placed within the electric field created by another charged particle, it experiences a force due to the interaction between its charge and the electric field. This force is proportional to the strength of the electric field and the charge on the particle.

Therefore, if an object is placed between two charged metal plates, one positively charged and one negatively charged, the electric field created by each plate will exert a force on the object. The magnitude and direction of the force will depend on the strength and direction of the electric fields created by the two plates and the charge on the object. This supports the student's claim that the space around a charged particle will exert a force on any other charged particle that is placed within this space.

You can learn more about charged particle at

https://brainly.com/question/18763828

#SPJ4

The concepts and methods of operations management (OM) can be used to improve efficiency and productivity in various industries and organizations. Some ways that OM can be applied include:

Process improvement: OM techniques such as process mapping, Lean Six Sigma, and value stream analysis can be used to identify areas for improvement in business processes and streamline operations.

Inventory management: OM concepts such as Just-In-Time (JIT) inventory management and demand forecasting can be used to optimize inventory levels and reduce waste.

Supply chain management: OM methods such as supplier selection, transportation planning, and production scheduling can be used to manage the flow of goods and materials from suppliers to customers.

Quality management: OM tools such as Total Quality Management (TQM) and statistical process control can be used to improve the quality of products and services.

Capacity planning: OM techniques such as forecasting and capacity utilization analysis can be used to determine future production needs and allocate resources accordingly.

Overall, OM can be used to make operations more efficient, reduce costs, increase profitability, and improve customer satisfaction.

Find out more about OM

brainly.com/question/30394742

#SPJ4

Two vertical walls are separated by a distance of 1.5 m, the length of the longest board that can be propped between the walls is approximately 1.4 meters.

To determine the length of the longest board that can be propped between the walls, we need to consider the conditions for equilibrium and the maximum static friction force.

Let's denote the coefficient of static friction between the board and wall 2 as μ.

For the board to be in equilibrium, the net force and net torque acting on it must be zero.

1. Net force in the vertical direction:

The weight of the board (mg) is balanced by the normal force (N) exerted by the walls.

mg = N

2. Net torque:

The torque exerted by the weight of the board about the point where it contacts wall 1 must be balanced by the torque exerted by the static friction force.

The torque due to weight (mg) about the contact point is zero since it acts along the line of contact.

The torque due to static friction (fs) about the contact point is fs * L/2, where L is the length of the board.

Since the board is in equilibrium, the torque due to static friction must balance the torque due to weight:

fs * L/2 = 0

Therefore, the length of the longest board that can be propped between the walls is determined by the condition when the static friction force reaches its maximum value and is on the verge of sliding:

fs max * L/2 = mg

The maximum static friction force (fs max) is given by:

fs max = μ * N

Substituting this into the equation above:

μ * N * L/2 = mg

μ * mg * L/2 = mg

Canceling out the mass and rearranging the equation, we find:

L/2 = 1/μ

L = 1.32/μ

Substituting the given coefficient of static friction (μ = 0.98) into the equation:

L = 1.32/0.98

L ≈ 1.4 meters

Therefore, the length of the longest board that can be propped between the walls is approximately 1.4 meters.

For more details regarding static friction, visit:

https://brainly.com/question/17140804

#SPJ12

From the given information about Tarzan,

a)No,the vine doesnot break.

b)The greatest force on it during the swing is 933N.

(a) To see if the vine breaks, it is adequate to inspect it right now Tarzan swings through the absolute bottom, which is the point at which the plant — in the event that it didn't break — would have the best strain. Picking a vertical positive, Newton's subsequent regulation prompts

                                T-mg=mv²/r

where r=18.0m and m=W/g=688/9.8=70.2kg. We see as the v²

from energy protection (where the reference position for the potential energy is at the absolute bottom).

mgh=(1/2)mv²

=>v²=2gh

where h=3.20m. Joining these outcomes, we have

T=mg+(m×2gh)/r=mg(1 + (2h/r))

=>T=70.2×9.8×[1+(2×3.2)/18]

=>T=687.96 × (1+ 6.4/18)

=>T=687.96 ×(1+0.355)

=>T=687.96×1.355

=>T=932.738N

Since,maximum force given is 950N ,therefore the vine doesn't break.

(b) Adjusting to a fitting number of huge figures, we see the greatest force is generally 9.3×10²N

To know more about force, visit here:

https://brainly.com/question/7362815

#SPJ4

The acceptable density of aluminum is 2.70 g/cm3. A measurement's theoretical values is its value as it is observed during experiment.

We use the word "density" to express how much space (or "volume") an item or substance takes in proportion to the quantity of stuff contained inside (its mass). Density is defined as the number of mass per volume, or to put it another way.

The volume of energy in an item or substance is quantified by its mass. Density is the ratio of the dimension (the amount of space an item or substance occupies) to the density (the amount of stuff) contained therein (its mass).

To know more about density visit:

https://brainly.com/question/13602514

#SPJ4

According to the graph, Car A and car B are colliding at 1 hour when  the cars start from the same position and are traveling in the same direction.

When two cars collide, their velocity and acceleration will both change drastically. The velocity of both cars will become zero, and the acceleration of both cars will become negative, as the cars will decelerate rapidly due to the force of the collision. When two cars collide, the direction of each car will change depending on the speed and angle of impact. The faster car will generally have more of an effect on the direction of the other car. Generally, the cars will move away from each other in different directions after the collision.

To learn more about collision click here https://brainly.com/question/28986861

#SPJ4

The steel bolt must stretch approximately 0.00011 m in order to provide a force of 2000 N

To find the distance the bolt must stretch in order to provide a force of 2000 N, we can use the relationship between force, spring constant, and displacement:

F = kx

where

F = force

k = spring constant (1.8 x 10^8 N/m)

x = displacement (distance the bolt must stretch)

Solving for x, we get:

x = F/k

x = 2000 N / (1.8 x 10^8 N/m)

x = approximately 0.00011 m

So, the steel bolt must stretch approximately 0.00011 m in order to provide a force of 2000 N.

A bolt works as a strong spring, stretching slightly when tightened. The relationship between force, spring constant, and displacement is described by the equation F = kx, where F is the force, k is the spring constant (1.8 x 10^8 N/m in this case), and x is the displacement or the amount the spring must stretch. To find the distance the bolt must stretch to provide a force of 2000 N, we divide the force by the spring constant. The result is approximately 0.00011 m, meaning the bolt must stretch by 0.00011 m to provide a force of 2000 N. This stretching occurs as the bolt is tightened, creating a strong clamping force between two surfaces.

Learn more about force here: brainly.com/question/13191643

#SPJ4

Energy (E) is given by the product of power (P) and time (t), so

E = P * t.If the car headlamp converts energy at a rate of 50 W.

E = 50 W * (5 minutes / 60 minutes/hour) = 50 W * (5/60) hours = 50 * (5/60) Wh

5 minutes = 5 minutes / 60 minutes/hour = 5/60 hours

Next, we'll use the formula for energy:

Energy (E) = Power (P) * Time (t)

Plugging in the values we have:

E = 50 W * (5/60) hours = 50 * (5/60) Wh

So the car headlamp converts 50 * (5/60) watt-hours of energy when it's switched on for 5 minutes.

In other words, 50 watts of power multiplied by 5/60 hours of time results in 50 * (5/60) watt-hours of energy.

To learn more about Energy please click on below link

https://brainly.com/question/2409175

#SPJ4

The acceleration of the 1.0 kg box would be 4.9 m/s²

The rate at which velocity changes with reference to both speed and direction over a period of time is referred to as acceleration. If a point or an object that is moving in a straight line speeds up or slows down, then the point or object is accelerating.

To find the acceleration, we can use this following formula:

a = ((m₂ – m₁) × g)) ÷ m1

Where:

a = acceleration

m₁ = the mass of the object 1

m₂ = the mass of the object 2

g = acceleration due to gravitation  (9.8 m/s²)

Thus, the acceleration of a 1.0 kg box would be:

A = ((1.5 kg – 1 kg) × 9.8 m/s²) ÷ 1 kg

A = 4.9 m/s²

To learn more about acceleration, click here:

https://brainly.com/question/30331729

#SPJ4

Compared to red light, blue light has a higher frequency and energy.

Visible light is made up of electromagnetic wavelengths that are visible to human vision. Infrared waves and ultraviolet light fall outside of this spectrum.

The colours we perceive are determined by the wavelengths and frequencies that an item reflects.

Light exists as a particle as well as a wave. It possesses wave qualities, such as amplitude, period, wavelength, and frequency, among others.

A wave's frequency is the number of times it completes a cycle every second. It is measured in cycles per second, or hertz (Hz).

The frequencies for visible light vary from 4*10^14 to 8*10^14 Hz.

The greater the frequency, the more energy there is in the light. Its wavelength becomes shorter as a result.

For more questions on Visible light

https://brainly.com/question/26970988

#SPJ4

The area of a cross-section of a wire is 1.472 × 10⁻⁷ m².

The complete question is in the attachment. The formula to calculate the resistance of an object

R = ρ × L ÷ A

R = ρ × L ÷ A

R × A = ρ × L

A = ρ × L ÷ R

A = 1.84 × 10⁻⁶ × 2 ÷ 25

A = 3.68 × 10⁻⁶ ÷ 25

A = 0.1472 × 10⁻⁶

A = 1.472 × 10⁻⁷ m²

Learn more about resistance here: https://brainly.com/question/12917948

#SPJ4

A)  the average speed of the car during the first leg is 34.4 miles/hr

B)the average speed of the car over the entire trip is 61miles/hr

We know, the average speed =Total distance/Total time then at a we convert mites/nour to m/s. [ 1 mile = 1600. 344 meter]

During,

1st lag, Distance (BI) = 40.6 miles time (+1) = 1.18 hours.

Average speed the car during the first v avg =40.6/1.18=34.4 miles/hr

During, 2nd leg,

Distance (D₂) = 140.7 miles Time (+ 2 )=2.27 hours

Average speed of the car during second. 140 miles/hour

v avg * 2 = 140.7/2.27 =61 miles/hr.

How is average speed determined?

It is calculated by dividing the overall distance traveled by the overall journey time. Consider the older automobile as an illustration. The car's average speed would be 70 / 2 = 35 miles per hour if it covered 70 miles in two hours.

Learn more about average speed:

brainly.com/question/4931057

#SPJ4

A) the tension is 392 N in the rope when the child is at rest.

B)T=208 N

A)length of the rope of the swing l=2.40m

mass of the child M = 40 kg

A child is at rest

T = mg = 40×9.8 T = 392 N

B)V=6m/s

Tension=T =Fc-mg

T=mv^2/l-mg

 =40(6)^2/2.40-40*9.8

T=208 N

Any physical object that is in contact with another one can apply forces to that object. Depending on the types of objects in touch, we label these contact forces differently. We refer to the force as tension if a rope, string, chain, or cable is one of the things applying the force.

Learn more about Tension:

brainly.com/question/24994188

#SPJ4

Complete ques is here:

A 40 kg child is sitting on a swing. The swing is attached to a tree branch by a single 2.40m long rope. A. Find the tension, in [N], in the rope when the child is at rest. B. Imagine that the swing can go around in a vertical circle, with a velocity of 6 m/s at the top of its motion. Find the tension in the rope at this point.