Which feature of cloud computing allows an organization to scale resources up and down as needed?

The statement "if a routing table has two or more valid routes for a particular ip always chooses the route with the highest metric" is False.

If a routing table has two or more valid routes for a particular IP, the route selection is not always based on the highest metric. The metric is just one factor considered in the route selection process, but it is not the sole determining factor.

The route selection process depends on the specific routing protocol being used. Different routing protocols have different criteria and metrics for route selection.

While some routing protocols prioritize routes with lower metrics (where a higher metric indicates a less desirable route), others may consider other factors such as administrative distance, bandwidth, or path cost.

Therefore the statement is False.

To learn more about routing table: https://brainly.com/question/29915721

#SPJ11

The runtime analysis of the given code is dependent on the size of the input array.

The add_powers_of_three function takes an input array of band calculates the sum of all the powers of three in the array. The code loops through the array and checks if each element is a power of three. If it is, then the value of that element is added to the running sum. Finally, the function returns the total sum.

Let's analyze the runtime complexity of the code. The for loop iterates through each element of the array, so the time complexity of this function is O(n), where n is the length of the input array.

However, the time complexity of determining if an integer is a power of three is not constant. This requires checking if the integer is divisible by three multiple times until the quotient is no longer divisible by three. This check takes O(log3 n) time complexity in the worst-case scenario, where n is the input integer.

Since the add_powers_of_three function performs this check for each element in the array, the overall time complexity of this function becomes O(n log3 n).

To know more about input array visit:-

https://brainly.com/question/31686595

#SPJ11

This is a true statement. Unanimous opinions of the court are rare and significant because they indicate a high degree of agreement among the judges.

This strong consensus sets a powerful precedent that is difficult to overturn. It also sends a clear message to lower courts and other judges that this is the correct interpretation of the law. When a unanimous opinion is reached, it shows that the issue at hand is not a controversial or divisive one, and that the decision is based on solid legal reasoning and analysis. As a result, it is highly unlikely that future cases will be able to successfully challenge or overturn the decision made in a unanimous opinion.

To know more about courts visit:

https://brainly.com/question/13375489

#SPJ11

The startup current for large induction motors is very high because the starting impedance is purely inductive. The correct option is b.

An inductive load, such as an induction motor, requires a large amount of current to overcome its inductance and start running.

Know more about the induction motors

https://brainly.com/question/28852537

#SPJ11

SQL triggers are created using the "SQL CREATE TRIGGER" statement.Triggers in SQL are special types of stored procedures that are automatically executed or fired in response to specific events or actions occurring in a database table.

These events can include INSERT, UPDATE, or DELETE operations on the table. Triggers are often used to enforce business rules, maintain data integrity, or perform additional actions based on the occurrence of these events.To create a trigger in SQL, the "CREATE TRIGGER" statement is used. This statement allows you to define the trigger's name, the event that triggers it, the table it is associated with, and the actions to be performed when the trigger is fired. The trigger can be written in SQL or in a specific programming language supported by the database system.Therefore, the correct answer is: c. The SQL CREATE TRIGGER statement.

To know more about database click the link below:

brainly.com/question/31200286

#SPJ11

Taking a Social Issues and Ethics course is beneficial for several reasons. Firstly, it equips you with the necessary skills to analyze and navigate ethical issues that may arise in your personal and professional life. As professionals, we are often faced with ethical dilemmas that require critical thinking and ethical decision-making.

For such more question on Ethics

https://brainly.com/question/2222369

#SPJ11

Taking a Social Issues and Ethics course is essential for professionals for several reasons. First, it helps individuals develop critical thinking skills and gain a better understanding of ethical issues in both their personal and professional lives.

This enables them to make more informed decisions and better navigate complex ethical dilemmas.

Second, professionals have the potential to cause harm to society and/or their company, either intentionally or unintentionally. A Social Issues and Ethics course provides them with a framework for assessing ethical concerns and making decisions that are socially responsible and aligned with the values of their organization.

Third, by taking this course, professionals can help minimize major incidents due to unethical practices. They can identify ethical risks and work proactively to mitigate them, which can ultimately protect their organization from legal, financial, and reputational harm.

Finally, taking a Social Issues and Ethics course can also help protect one's job by demonstrating a commitment to ethical behavior and professional development. This can lead to career advancement opportunities and greater job security.

Learn more about Social here:

https://brainly.com/question/30911389

#SPJ11

ECDSA (Elliptic Curve Digital Signature Algorithm) based on the given elliptic curve with order 11 and a point (4,2)

To answer the questions about ECDSA (Elliptic Curve Digital Signature Algorithm) based on the given elliptic curve with order 11 and a point (4,2), let's address each question separately:

(a) Assuming the signer chooses a private key d = 4, compute the signer's public key P:

To compute the public key P, we multiply the private key d with the base point (4,2) using elliptic curve scalar multiplication. Given d = 4, we perform the scalar multiplication:

P = d * (4,2) = 4 * (4,2) = (8,7)

So, the signer's public key P is (8,7).

(b) Assuming the signer chooses k = 9, compute the point (x, y) generated by the signer:

To compute the point generated by the signer using the value k, we perform elliptic curve scalar multiplication:

(x, y) = k * (4,2) = 9 * (4,2) = (2,2)

So, the point generated by the signer is (2,2).

(c) Given a message that hashes to a value of h = 8, compute the signature values r and s:

To compute the signature values r and s, we follow the ECDSA signature algorithm steps. Since the details of the algorithm are not provided, I am unable to compute the exact values of r and s without knowing the specifics of the algorithm.

(d) Compute the point Q used to verify the signature:

To compute the point Q used to verify the signature, we need additional information about the verification process and the relationship between the public key P, signature values, and the message. Without these details, I am unable to determine the specific point Q for verification.

ECDSA algorithm and the verification process to compute the signature values and point Q accurately

To know more about Digital .

https://brainly.com/question/31367531

#SPJ11

Devices that have been replaced by iPods, iPads, and other mobile devices for personal use include portable music players.

Walkmans and Discmans, as iPods introduced the convenience of storing and playing music digitally. Additionally, dedicated e-readers, like Kindle and Nook, have been partially replaced by tablets like iPads, which offer e-reading functionality along with other features. Mobile devices have also taken over certain functions of digital cameras, as smartphones now have high-quality built-in cameras that have made standalone digital cameras less necessary for casual photography. Furthermore, traditional alarm clocks, calculators, and portable gaming devices have seen a decline in usage due to the multi-functionality and convenience of mobile devices.

Learn more about personal technology here:

https://brainly.com/question/1050951

#SPJ11

PKI (Public Key Infrastructure) typically consists of the following components:

Certificate Authority (CA): The CA is a trusted entity responsible for issuing and managing digital certificates. It verifies the identity of individuals or entities and signs their public key certificates.

Registration Authority (RA): The RA assists the CA by verifying the identity of certificate applicants and forwarding their requests for certificate issuance. It performs administrative tasks related to certificate management.

Certificate Repository: It is a centralized location or database where issued certificates and their associated information are stored. It allows users to access and retrieve public key certificates when needed.

Public Key Certificate: A digital certificate binds an entity's public key to its identity. It includes information such as the entity's name, public key, the issuing CA's digital signature, and other relevant details.

Private Key: Each user or entity in PKI possesses a private key that is kept securely and used for signing digital documents, decrypting encrypted data, or establishing secure communication.

Public Key: Corresponding to the private key, each user or entity has a public key that is widely distributed. It is used for verifying digital signatures, encrypting data sent to the user, or establishing secure communication.

Certificate Revocation List (CRL): A CRL is a list published by the CA that contains information about revoked certificates. It helps in identifying certificates that are no longer valid due to key compromise, expiration, or other reasons.

Certificate Policies: Certificate policies define the rules and guidelines for issuing, managing, and using certificates within the PKI. They outline the intended usage and limitations of the certificates.

These are the fundamental components of a PKI infrastructure. They work together to enable secure communication, authentication, and data integrity in various applications and systems.

Know more about Public Key Infrastructure here:

https://brainly.com/question/29662188

#SPJ11

In the ice cream sundae example, a deadlock occurs when the following four necessary conditions are present:

1. Mutual Exclusion: The mutual exclusion condition is represented by the fact that there is only one available ice cream sundae. This means that only one person can have access to the ice cream sundae at a time, and others have to wait for their turn.

2. Hold and Wait: The hold and wait condition is depicted by the next person in line grabbing the only available spoon while holding the ice cream sundae. This person is holding the spoon and waiting for the ice cream sundae, while the person with the ice cream sundae is waiting for a spoon. Both processes are holding their respective resources and waiting for the other resource to become available.

3. No Preemption: The no preemption condition is evident in the example as neither the person with the ice cream sundae nor the person with the spoon is willing to give up their resources. They are unwilling to release their resources and wait for the required resource to become available.

4. Circular Wait: The circular wait condition is present when there is a circular chain of processes, each waiting for a resource held by another process in the chain. In the ice cream sundae example, the person with the ice cream sundae is waiting for a spoon, while the person with the spoon is waiting for an ice cream sundae. This forms a circular chain of waiting, where each person is waiting for the other person's resource.

These four conditions together result in a deadlock because none of the processes can proceed further without obtaining the resource held by the other process. In this situation, deadlock occurs when no additional ice cream sundaes or spoons become available, and neither person is willing to give up their resource.

Learn more about Deadlock Condition :

https://brainly.com/question/31367332

#SPJ11

In Scheme, the command (cdr l) returns the portion of the list l excluding its first element.

In computing, a command is a directive to a computer program to perform a specific task. It may be issued via a command-line interface, such as a shell, or as input to a network service as part of a network protocol, or as an event in a graphical user interface triggered by the user selecting an option in a menu.

Given the list (3 7 2 8), if we execute (cdr l), it will return the list (7 2 8). This is because (cdr l) discards the first element 3 and returns the remaining elements of the list.

Know more about command here:

https://brainly.com/question/32329589

#SPJ11

The statement that a high packet loss rate indicates users experiencing a significantly poor quality is indeed true.

A high packet loss rate generally indicates a poor quality of network connectivity. Packet loss occurs when data packets being transmitted across a network fail to reach their destination. When packets are lost, it can result in degraded or disrupted communication, leading to a negative impact on the quality of the user experience.

In real-time applications such as video conferencing, online gaming, or voice calls, high packet loss can lead to noticeable issues such as audio or video distortion, delayed or choppy communication, or dropped connections. Similarly, in data transfer scenarios, packet loss can result in slower transfer speeds, incomplete or corrupted file transfers, and the need for retransmission of lost packets, leading to reduced overall efficiency.

Hence, a high packet loss rate is generally indicative of a poor network connection and can significantly impact the quality and performance of user interactions over the network.

Learn more about network at: https://brainly.com/question/8118353

#SPJ11

The Russian church lacks stone/masonry material. The symbolic domes are likely made of lighter materials, such as wood or metal, while the altar dome is typically made of stone or brick for structural stability.

Stone or brick materials are commonly used in traditional Russian church architecture to support the weight of the larger central dome and ensure durability and longevity. By using lighter materials for the symbolic domes, the church can still maintain the symbolic representation without compromising the structural integrity of the main altar dome.

Learn more about Russian church lacks here:

https://brainly.com/question/30062844

#SPJ11

As an AI language model, I do not have personal preferences. However, it is important to note that the decision-making process for systems analysts can vary depending on the project and the analyst's preferred approach.

Starting with a decision table allows for a visual representation of the decision-making process, making it easier to identify rules and outcomes. This can be helpful when dealing with complex scenarios or large amounts of data. Once the rules have been established, they can be used to construct a decision tree.
On the other hand, starting with a decision tree allows for a more structured approach to decision-making. The analyst can break down the problem into smaller, more manageable parts and determine the best course of action for each scenario. This can be helpful when dealing with a smaller set of data or a more straightforward problem.
To know more about decision-making visit:

https://brainly.com/question/31422716

#SPJ11

When enabling telemetry on a router, the essential feature to get application data is the use of application-specific telemetry sensors.

These sensors are designed to collect data related to specific applications running on the network, such as web browsing, video streaming, or VoIP calls. By enabling telemetry on the router, the sensors are able to collect this data and send it to a telemetry collector for analysis. This allows network administrators to gain insight into how applications are being used on the network and identify any performance issues or security threats. Without the use of application-specific telemetry sensors, it would be difficult to obtain this level of granular application data.
Hi! When enabling telemetry on a router, the essential router feature to get the application data is the Simple Network Management Protocol (SNMP). SNMP allows for the collection and organization of network information, enabling efficient monitoring and management of the application's data traffic. This feature helps to ensure smooth communication between the router and the telemetry application.

For more information on telemetry visit:

brainly.com/question/31830846

#SPJ11

The two criteria according to the Biological Species concept are reproductive compatibility and fertility of the offspring.

The Biological Species concept defines a species based on two major criteria: reproductive compatibility and fertility of the offspring. The first criterion states that organisms must be able to reproduce, meaning that individuals of the same species can mate and produce viable offspring. The second criterion states that the offspring produced through mating must also be fertile, capable of reproducing themselves. These criteria emphasize the importance of reproductive isolation and genetic compatibility in defining a species. Organisms that cannot fulfill these criteria, such as those that produce infertile offspring or cannot reproduce at all, would not be considered part of the same biological species.

Learn more about Biological Species here:

https://brainly.com/question/29820076

#SPJ11

The given statement "in a recursive algorithm the computer receives the base case first and then works on the recursive cases" is FALSE because the base case acts as the terminating condition to prevent infinite recursion

However, the computer does not receive the base case first. Instead, the algorithm starts with an initial problem and repeatedly breaks it down into smaller sub-problems using recursion. Once a sub-problem reaches the base case, the algorithm stops further recursion and begins to solve the problem by combining the solutions of the sub-problems.

The base case provides a simple, solvable instance of the problem that the recursive algorithm can build upon to derive the final solution.

Learn more about algorithm at https://brainly.com/question/12115774

#SPJ11

According to the Noel Hypothesis, the outcome of a contact situation is determined by three factors: the differences between the groups, the contact situation itself, and the competitive nature of the groups involved.

This hypothesis suggests that when groups with differing characteristics come into contact, their differences can lead to a hierarchy, often resulting in one group dominating the other. The contact situation shapes the interactions and power dynamics, while competition for resources or social positions can further exacerbate conflicts and inequalities. Overall, the Noel Hypothesis helps us understand how intergroup relations are influenced by group differences, contact situations, and competitive aspects.

learn more about Noel Hypothesis, here:

https://brainly.com/question/12993960

#SPJ11

To determine the complete rate law for a reaction with two reactants, you need to gather sufficient initial rate data by conducting a minimum number of trials. The minimum number of trials required is four.

In each trial, you need to vary the concentrations of the two reactants independently, while keeping the other constant, to investigate how the initial rate of the reaction changes. Two trials should focus on the first reactant (Reactant A), while the other two trials should focus on the second reactant (Reactant B). In the first two trials, you will change the concentration of Reactant A, while keeping the concentration of Reactant B constant. This allows you to establish the relationship between the initial rate of the reaction and the concentration of Reactant A. From these trials, you can determine the order of the reaction with respect to Reactant A. Similarly, in the last two trials, you will change the concentration of Reactant B while keeping the concentration of Reactant A constant. This will help you determine the relationship between the initial rate of the reaction and the concentration of Reactant B. From these trials, you can find the order of the reaction with respect to Reactant B. Once you have the order for both reactants, you can combine them to write the complete rate law for the reaction. Thus, a minimum of four trials is required to gather sufficient initial rates data for a reaction involving two reactants.

Learn more about reactants here:

https://brainly.com/question/13005466

#SPJ11

The provided Java program reads two integers `x` and `y` and displays the divisors of 3 between `x` and `y` using a `for` loop and a `while` loop.

Here's a Java program that reads two integers `x` and `y` and displays the divisors of 3 between `x` and `y` using a `for` loop and a `while` loop:

import java.util.Scanner;

public class DivisorsOfThree {

   public static void main(String[] args) {

       Scanner input = new Scanner(System.in);

       System.out.print("Enter the value of x: ");

       int x = input.nextInt();

       System.out.print("Enter the value of y: ");

       int y = input.nextInt();

       input.close();

       System.out.println("Using for loop:");

       displayDivisorsUsingForLoop(x, y);

       System.out.println("\nUsing while loop:");

       displayDivisorsUsingWhileLoop(x, y);

   }

   public static void displayDivisorsUsingForLoop(int x, int y) {

       for (int i = x; i <= y; i++) {

           if (i % 3 == 0) {

               System.out.println(i);

           }

       }

   }

   public static void displayDivisorsUsingWhileLoop(int x, int y) {

       int i = x;

       while (i <= y) {

           if (i % 3 == 0) {

               System.out.println(i);

           }

           i++;

       }

   }

}

```

Learn more about Java program

brainly.com/question/30354647

#SPJ11

True. Registers are small, high-speed storage locations within the CPU that hold data temporarily during processing. They are located directly on the CPU chip and are used for performing arithmetic and logical operations, as well as for storing data temporarily while it is being processed. Each register can store a small amount of data, typically ranging from 8 to 64 bits, and they are organized into different types based on their function, such as general-purpose registers, control registers, status registers, and floating-point registers. The number and type of registers vary between different CPU architectures, but they are essential components of any computer processor as they help to optimize performance and speed up processing times by reducing the need for data to be fetched from the main memory or external storage devices. Overall, registers are critical components that play a vital role in the operation of modern CPUs and are a fundamental concept in computer architecture and digital electronics.

To know more about Registers visit:

https://brainly.com/question/16740765

#SPJ11

If the random bit stream is truly random, it will have an equal probability of containing 0s and 1s. Similarly, the nonrandom bit stream may have its own pattern or distribution of 0s and 1s.

To show that XORing a random bit stream with a nonrandom bit stream produces a pseudorandom bit stream, we need to demonstrate that the resulting bit stream exhibits certain properties of randomness.

Let's consider the properties of a pseudorandom bit stream:

Randomness: A pseudorandom bit stream should appear random, meaning that there should be no obvious pattern or regularity in the sequence of bits.

Unpredictability: A pseudorandom bit stream should be unpredictable, meaning that it should be difficult to guess or determine the next bit based on the previous bits.

Now, let's analyze the XOR operation between a random bit stream and a nonrandom bit stream:

When we XOR these two bit streams, the resulting bit stream will exhibit properties that resemble those of a pseudorandom bit stream:

Randomness: Since the random bit stream is evenly distributed with 0s and 1s, XORing it with the nonrandom bit stream will introduce variations and fluctuations in the resulting bit stream. This will make it appear more random and less predictable than the nonrandom bit stream alone.

Unpredictability: XORing the random bit stream with the nonrandom bit stream will introduce dependencies between the two streams. This means that it will be difficult to predict the next bit in the resulting bit stream based solely on the previous bits of either the random or nonrandom bit stream.

By leveraging the properties of randomness and unpredictability introduced by the XOR operation, the resulting bit stream can be considered pseudorandom.

It's important to note that the quality of the pseudorandom bit stream depends on the randomness of the initial random bit stream and the nonrandom bit stream used. If the random bit stream is not truly random or if the nonrandom bit stream exhibits strong patterns, the resulting bit stream may not be sufficiently pseudorandom.

Know more about random bit stream here:

https://brainly.com/question/31847673

#SPJ11

Computer room humidity is an important factor to consider in order to maintain the proper functioning of computer systems.

Ideally, computer room humidity should be kept above a certain percentage to ensure that the electronic equipment is not damaged or affected by static electricity.

The recommended humidity range for a computer room is generally between 40-60%. If the humidity level is too low, there is a risk of static electricity buildup, which can cause damage to sensitive electronic components. On the other hand, if the humidity level is too high, it can lead to condensation and moisture buildup, which can also damage electronic equipment.

To know more about Computer visit:-

https://brainly.com/question/16400403

#SPJ11

A clustered index is a type of database index that determines the physical order of data within a table based on the values of one or more columns. In a clustered index, the data is stored in the same order as the index, which provides efficient retrieval of data when accessing rows sequentially or performing range-based queries.

A clustered index organizes the data in a table by physically sorting and storing the rows based on the values of the indexed column(s). This means that the data is physically ordered on disk according to the values in the clustered index. As a result, retrieving data using the clustered index can be faster compared to non-clustered indexes or when scanning the entire table. Since the data is stored in the same order as the index, there can only be one clustered index per table. It is important to choose the columns for the clustered index carefully, considering the typical access patterns and queries performed on the table to optimize performance.

Learn more about data here-

https://brainly.com/question/30051017

#SPJ11

Aerial images and other data collected with remote sensing is usually stored in a raster data model. In this model, data is represented by a grid of cells, with each cell containing a value that represents a physical or environmental attribute.

Raster data is widely used in geographic information systems (GIS) and remote sensing applications because it can represent continuous phenomena such as elevation, temperature, and vegetation cover. The raster data model is also advantageous for processing large datasets, as it allows for efficient storage and analysis of data. However, it may not be suitable for representing complex vector data such as road networks and building footprints, which require the use of a vector data model.

learn more about  raster data model. here:

https://brainly.com/question/29036443

#SPJ11

When you drag a tab off the ruler, the following occurs:Option (C) The tab is cleared.

The Tabs dialog box is available through the Format menu and the Paragraph dialog box. The Tabs dialog box can be used to create and delete tabs, as well as adjust the tab’s position and leader style. If you don't want to see the tabs, you can clear them by clicking on the Clear All button in the Tabs dialog box, and if you don't want to use a specific tab, you can drag it off the ruler and delete it.

The ruler bar at the top of your screen is where you can find the tab settings. The tab setting is made up of two parts: the location of the tab and the type of tab. When you drag a tab from the ruler bar, the tab is cleared, and the location is removed from the ruler bar. Therefore, Option (C) The tab is cleared occurs when you drag a tab off the ruler.

Learn more about Tabs dialog box: https://brainly.com/question/28813622

#SPJ11

False. To count the number of rows in a table, we use the SQL construct COUNT(*) or COUNT(column_name).

The COUNT function returns the number of rows in a table that meet the specified condition. The * symbol represents all columns in the table. So, if we use COUNT(*) it will count all the rows in the table. If we want to count only the rows that meet a specific condition, we can use a WHERE clause in the SQL statement.
For example, if we have a table named "students" and we want to count the number of students who have scored more than 80 in their exams, we can use the following SQL query:
SELECT COUNT(*) FROM students WHERE score > 80;
This query will return the count of rows in the table where the score is greater than 80. Therefore, the statement "to count the number of rows in a table, use the SQL construct count(rows)" is not correct. Instead, we should use COUNT(*) or COUNT(column_name) along with a WHERE clause to count the number of rows in a table.

Learn more about SQL :

https://brainly.com/question/31663284

#SPJ11

The given statement " a server is a device with a particular set of programs or protocols that provide various services, which other machines or clients request, to perform certain tasks" is TRUE because it is a device equipped with specific programs and protocols that offer a variety of services.

These services are requested by other machines, also known as clients, in order to carry out specific tasks.

In a typical client-server model, the server receives requests from clients, processes the requests, and returns the appropriate responses. This setup allows for efficient resource management and task distribution within a network.

Some common types of servers include web servers, database servers, and file servers, each serving a unique purpose to support the functioning of the clients connected to them.

Learn more about server at

https://brainly.com/question/30168195

#SPJ11

The technology used to detect ethanol secreted through the skin by an offender on probation is called a "SCRAM bracelet" or "Secure Continuous Remote Alcohol Monitoring bracelet." This device helps monitor the offender's alcohol consumption to ensure compliance with probation conditions.

SCRAM bracelet, an ankle bracelet for Secure Continuous Remote Alcohol Monitoring. Salted Challenge Response Authentication Mechanism (or SCRAM), a computer security mechanism used with the Simple Authentication and Security Layer. The device looks like a bracelet, worn against the skin around the ankle, which takes intermittent samples of a person's sweat, often every thirty minutes. SCRAM works by by measuring gas alcohol concentration found over the skin.

To learn more about "Security Layer" visit: https://brainly.com/question/29796704

#SPJ11

To support seven virtual machines with the minimum number of usable IP addresses, we would use a /29 subnet.

To answer this question, we need to understand the concept of subnetting and how it affects the number of usable IP addresses. Subnetting is the process of dividing a larger network into smaller subnetworks, each with its own unique network address and range of IP addresses.

Out of the given options, the subnet that provides the minimum number of usable IP addresses to support seven virtual machines is /29. This is because /29 provides 6 usable IP addresses, which is the closest number to 7 without going over.

In general, the formula for calculating the number of usable IP addresses in a subnet is 2^(32 - n) - 2, where n is the number of bits used for the network portion of the IP address. In the case of /29, there are 3 bits used for the network portion, leaving 5 bits for the host portion. Therefore, the number of usable IP addresses is 2^(32 - 29) - 2 = 6.

In comparison, /30 provides only 2 usable IP addresses, /28 provides 14 usable IP addresses, and /27 provides 30 usable IP addresses. These subnets would be more suitable for larger networks with more devices or virtual machines.

Learn more on IP addresses here:

https://brainly.com/question/31026862

#SPJ11