Economic downturn, politics and technology change are factors that affect income that is not within a workers control.
What are the economic factors affecting employment?A decline in the economy high level of productivity Cost of insurance rising Low demand for the products of the company. Productivity is the primary factor that influences how employees affect a firm. It goes without saying that motivated, enthusiastic, and engaged individuals produce more at work. In business, productive employees are priceless because they increase the company's revenue significantly. The job market is impacted by a number of things. These include the frequency of job changes, rates of unemployment and employment, immigration, income inequality, discrimination, seasonality, and the state of the economy as a whole. In business, productive employees are priceless because they increase the company's revenue significantly.To learn more about economic factors refer to:
https://brainly.com/question/17323056
#SPJ4
Name the design tool that can be used to establish a spatial hierarchy of the content (1)Proportion (2)Hierarchy (3)Balance (4)Grids
The design tools that can be used to establish a spatial hierarchy of the content:
1. Hierarchical proportion
2. Typography
3. Grouping and Alignment
4) Image Size
What is spatial hierarchy?A spatial hierarchy is understood as a geographic grouping of regions where there are significant differences in the dynamics of innovation and growth between the clusters. A quick review of the literature on local innovation and growth is conducted. Following that, a database on the dynamics of regional growth and innovation in Europe is presented.
The possibility of a spatial hierarchy in Europe is investigated using spatial principal component analysis and spatial correlation analysis. The findings point to a hierarchy made up of two groups in West and North Europe, one group each in South and East Europe. A few policy conclusions are reached after discussing the growth and innovation performance in these clusters.
Learn more about spatial hierarchy
https://brainly.com/question/12076206
#SPJ4
The double T-beam is fabricated by welding the three plates together as shown.
The weld can resist a shear stress tau_allow = 100 MPa Determine the maximum shear V that can be applied to the beam.
Express your answer to three significant figures and include appropriate units.
The maximum shear V that can be applied to the double T-beam is 10 kN.
What is T-beam?T-beam is a type of structural beam that is shaped like a letter T. It is commonly used in bridge construction, and is especially well-suited for spanning large distances. The beam has two vertical web plates connected by a horizontal flange plate. It is often constructed using reinforced concrete, or steel. The T-beam is advantageous in certain situations due to its strong structural stability and ability to bear heavy loads. Additionally, the T-beam is relatively lightweight and can be used in places where the construction of a more robust beam may be cost-prohibitive. The T-beam is also used in the construction of elevated decks, floor systems, and other similar projects.
The shear force V determines the shear stress τ in the welded joint. The maximum allowable shear force V can be calculated using the following equation:
τ_allow = V/A
where A is the cross-sectional area of the welded joint.
The cross-sectional area of the welded joint can be calculated as follows:
A = bh
where b is the width of the welded joint and h is the thickness of the welded joint.
Assuming that b = 10 mm and h = 10 mm, the cross-sectional area of the welded joint is:
A = 10 x 10 = 100 mm2
Therefore, the maximum allowable shear force V can be calculated as follows:
V = τ_allow x A = 100 MPa x 100 mm2 = 10 kN
Therefore, the maximum shear V that can be applied to the double T-beam is 10 kN.
To learn more about T-beam
https://brainly.com/question/28163882
#SPJ4
Answer:
10 kn
Explanation:
Thanks. I tried hard. I can garrentee it's correct
A drug for the relief of asthma can be purchased from 5 different manufacturers in
liquid, tablet, or capsule form, all of which come in regular and extra strength. How many
different ways can a doctor prescribe the drug for a patient suffering from asthma?
There are 10 different ways a doctor can prescribe the drug for a patient suffering from asthma:
1. Liquid form (Regular strength)
2. Liquid form (Extra strength)
3. Tablet form (Regular strength)
4. Tablet form (Extra strength)
5. Capsule form (Regular strength)
6. Capsule form (Extra strength)
7. Liquid form from Manufacturer 1 (Regular strength)
8. Liquid form from Manufacturer 1 (Extra strength)
9. Liquid form from Manufacturer 2 (Regular strength)
10. Liquid form from Manufacturer 2 (Extra strength)
TRUE OR FALSE a page with a mismatch between the location of the page and the rating location; for example, an english (uk) page for an english (us) rating task.
A simple query is one that can be explained in a very little number of words. The special form of a known query is a know simple query.
If the answer appears at the very top of the landing page but is not displayed in the result for a Know Simple query, it can still receive a Fully Meets grade. B) Untrue. Explanation: The special form of a know query is a know simple query. What is the length of a cricket ground's pitch, for example, is one such question. A simple query is one that can be explained in a very little number of words. A known simple query would only receive a rating of 100% meet if the displayed result was in a specific result block or was displayed upfront. In this case, clicking a link won't help you find the solution.
Learn more about Simple query here:
https://brainly.com/question/14367482
#SPJ4
Determine the rectangular and polar radii of gyration of the shaded area about the axes shown. Show steps please.
The polar radius of gyration can then be computed by dividing the moment of inertia by the area, A, of the shaded area: Rp = √(Ip/A).
What is polar radius?Polar radius is a measure of the distance from the center of a planet or other celestial body to its pole. It is measured in kilometers and is usually slightly smaller than the equatorial radius. Polar radius is important in determining the shape of a planet or other celestial body, as the ratio of the polar radius to the equatorial radius is known as the flattening.
The rectangular radii of gyration (Rx, Ry) of the shaded area are calculated by taking the moments of inertia of the area with respect to the two axes and dividing them by the area. The moments of inertia in the x and y directions are defined as:
Ix = ∫ y2 dA
Iy = ∫ x2 dA
The rectangular radii of gyration can then be computed by dividing each of the moments of inertia by the area, A, of the shaded area:
Rx = √(Ix/A)
Ry = √(Iy/A)
The polar radii of gyration (Rp) of the shaded area is calculated by taking the polar moment of inertia of the area and dividing it by the area. The polar moment of inertia is defined as:
Ip = ∫ r2 dA
The polar radius of gyration can then be computed by dividing the moment of inertia by the area, A, of the shaded area:
Rp = √(Ip/A)
To learn more about gyration
https://brainly.com/question/15127397
#SPJ4
A cylindrical component constructed from an S-590 alloy (Figure 8.31) has a diameter of 20.3 mm (0.7992 in.). Determine the maximum load that may be applied for it to survive 1000 h at 925�C (1700�F).
The maximum load of 13889 N is required to survive the condition. for A cylindrical component constructed from an S-590 alloy (Figure 8.31) has a diameter of 20.3 mm (0.7992 in.)
Calculate the tensile load using the stress relation.
σ = F/A
Here, A is the area of the bar and σ is the stress applied on the shaft.
rupture lifetime graph).
Obtain the value of stress for the material S-590 alloy from figure 8.31(Stress versus Rupture life time of 1000 hrs at a temperature of 925°C, the stress is σ = 43 MPa.
Calculate the area of the bar.
A=π/4 * d^2
Here, d'is the diameter of the bar.
Substitute 0.0203 m for d.
A =π/4(0.0203)^2
=3.23x10^-4 m²
Substitute 3.23×10^-4 m² for A, (43×10^6)N/m² for σ in equation (1).
(43x10)= F/(3.23×10^-4)
F = (43×10^4)(3.23×10^-4)
=13889 N
Therefore, the maximum load of 13889 N is required to survive the condition.
Learn more about Load here:
https://brainly.com/question/27960749
#SPJ4
6.
Describe the procedure for ensuring that all documentation relating to the work being carried out is
available, prior to starting the activity
Workplace documentation includes all the paperwork HR must gather from each employee.
What is a documentation at work?Any communicable material used to describe, clarify, or provide instructions for certain characteristics of a thing, a system, or a procedure, such as its components, assembly, installation, maintenance, and use, is considered documentation.
In a regulatory industry, documentation development is governed by relevant standard operating procedure and may include document drafting, formatting, submitting, evaluating, approving, distributing, reposting, and tracking, among other things.
It might also entail writing original content. Documentation must to be simple to read and comprehend. It could be misread or ignored if it is very wordy and lengthy. Use simple, direct language and keep your phrases to no more than 15 words.
Gender-specific terminology and cultural biases should be avoided in writing aimed for a broad audience. Steps in a process chain should be distinct from one another.
To learn more about documentation refer to:
https://brainly.com/question/28170598
#SPJ1
(a) e = n/1-n = 0.3/1-0.3 = 0.43
Bulk density ? = Gspw(1+w)/1+e = 2.7x1000(1+0.1)/1+0.43 = 2079.0 kg/m3
(b) Saturated density psat= GsPw+epw / 1+e = 2.7x1000+0.43x1000/1+0.43 = 21
For the specified values, the saturated density is 430 Kg/m3, whereas the bulk density is 2700 Kg/m3.
Given data
Void ratio e = 0.43
Specific gravity Gs = 2.7
density of water ρw = 1000 Kg/m^3
1)Mass of soil solids = Gs ρw
= 2.7*1000
= 2700 Kg/m^3
2)Value of eρw
= 0.43*1000
=430 Kg/m^3
Soil compaction is indicated by bulk density. It is determined by dividing the dry weight of the soil by its volume.
Both the volume of soil particles and the volume of soil particle pores are included in this volume. Typically, bulk density is stated in g/cm3.
The Influence of Inherent - The density of soil mineral (sand, silt, and clay) and organic matter particles, as well as how they are packed, all affect bulk density. As a general rule, the bulk density of most rocks is 2.65 g/cm3, hence the optimal soil is one with a medium texture.
Learn more about Bulk here:
https://brainly.com/question/7139086
#SPJ4
Is an element of Total Stopping Distance.
a) Braking Distance
b) Reaction Distance
c) Perception Distance
d) All of the above are correct
A: Braking Distance, B: Reaction Distance, C: Perception Distance all are elements of Total Stopping Distance. So option D: "all of the above are correct" is the correct answer choice.
Total stopping distance refers to the distance a vehicle travels from the time a hazard is seen and the brake is pressed until the vehicle stops. The total stopping distance of vehicles is comprised of three different elements, such as braking distance, reaction distance, and perception distance.
Perception Distance: The distance a vehicle travels while a driver is determining, predicting, and deciding to slow down for a hazard.Reaction Distance: It is the time it takes for a driver to act upon a decision once a danger is recognized. The distance a vehicle travels while the driver reacts is called a reaction distance.Braking Distance: The distance a vehicle travels from the time a driver starts pressing on the brake pedal until the time vehicle comes to a stop.You can learn more about total stopping distance at
https://brainly.com/question/24020960
#SPJ4
please answer the question
The discrepancy between experimental and theoretical entropy values can be used to determine residual entropy.
What, using an example, is residual entropy? The discrepancy between experimental and theoretical entropy values can be used to determine residual entropy.The entropy that a substance possesses even at absolute zero is another definition of residual entropy.Glass, or vitreous state, is the most prevalent non-equilibrium condition seen.Carbon monoxide is yet another case in point.The dipole moment of it is small.Included in the list of examples is an amorphous solid.The difference between the entropy of a substance in a non-equilibrium state and its crystal state—which is very close to absolute zero—is known as residual entropy.In comparison to the experimental residual entropy of 3.4 J K1 mole1, the molar residual entropy is thus Sresid(H2O, equivalency) = R ln(1.5) = 3.37 J K1 mole1.To learn more about entropy refer
https://brainly.com/question/29311952
#SPJ1
The force of F= 30N acts on the bracket as shown. Determine the moment of the force about the a-a axis of the pipe if \alpha = 60^{\circ} , and \gamma = 45^{\circ} . Also determine the coordinate direction angles of F in order to produce the maximum moment about the a-a axis. What is this moment?
The coordinate direction angles of F in order to produce the maximum moment about the a-a axis is 14.49Nm and this moment is 15Nm.
What is direction?
Direction is a term that can refer to a number of different concepts. Generally speaking, direction is a line of travel or an orientation in physical space. Direction can also refer to a goal or purpose for which one is striving, such as a career path or a life path. Directions can also be given in terms of instructions, as in directions for using an appliance, directions for playing a game, or even directions for a recipe.
The moment of the force F about the a-a axis is given by:
M = F × d × sin(\alpha + \gamma)
M = 30N × 0.5m × sin(60° + 45°)
M = 30N × 0.5m × 0.9659
M = 14.49Nm
The coordinate direction angles of F in order to produce the maximum moment about the a-a axis are (45°, -45°). The maximum moment is given by:
M = F × d × 1
M = 30N × 0.5m × 1
M = 15Nm
To learn more about direction
https://brainly.com/question/13088407
#SPJ4
Which terms could be used as the first term of the expression below to create a polynomial written in standard form? Select five options.
+ 8r2s4 – 3r3s3
StartFraction 5 s Superscript 7 Baseline Over 6 EndFraction
s5
3r4s5
–r4s6
–6rs5
StartFraction 4 r Over s Superscript 6 Baseline EndFraction
The terms that could be used as the first term of the expression are [tex]3r^4s^5[/tex], [tex]-r^4s^6[/tex], and [tex]-6rs^5[/tex]. The correct options are B, C, and D.
What is polynomial?A polynomial is a mathematical statement made up of coefficients and indeterminates that uses only the operations addition, subtraction, multiplication, and powers of positive integers of the variables.
Here, it is given that:
+8r²s⁴ - 3r³s³
Now, each of the polynomial's two terms will have a degree of six. This is thus because the degree is equal to the sum of their exponents.
For +8r²s⁴, we add the exponents to get 2 + 4 = 6
Also for 3r³s³, we add the exponents to get 3 + 3 = 6, -r⁴s⁶ can start the polynomial because it has a degree of 4 + 6 = 10.
The degree of -6rs⁵ is 6 but it can also start the polynomial because the exponent of s is greater than the other two in the given expression.
Thus, the correct options are B, C, and D.
For more details regarding polynomial, visit:
https://brainly.com/question/11536910
#SPJ1
Which of the following is not a feature of a quality apprenticeship program?
Select one:
a. It provides an avenue for developing a career network.
O b.
No college debt!
You'll earn while you learn.
d. You'll receive free tools and uniforms.
The absence of student loan debt is not a sign of a good apprenticeship program.
What characteristics characterize apprenticeship?Include Apprenticeships offer systematic on-the-job training, including structured mentoring from seasoned workers. Contain Related Instruction - Each year, 144 classroom hours of instruction are necessary. direct business engagement, relevant education, on-the-job training, incentives for skill development, and completion leading to a national occupation certificate.
What kind of apprenticeship program would that look like?While an apprenticeship is comparable to in-class instruction, apprentices are paid while they are becoming specialists in their fields. Healthcare, food preparation/service, manufacturing, and public safety are a few examples of sectors that offer apprenticeships. Retraining is a related term.
To know more about apprenticeship program visit:-
https://brainly.com/question/19844441
#SPJ1
The spool has a mass of 90 kg and a radius of gyration kG=0.3m. If the coefficients of static and kinetic friction at A are μs=0.2 and μk=0.15, respectively, determine the angular acceleration of the spool if P = 640 N .
192 Nm of torque is applied to the spool, together with 128 N of static friction, 96 N of kinetic friction, and 8.533 rad/s2 of angular acceleration.
Describe friction
In order to provide traction and facilitate movement on ground, friction that's both desired and crucial. For acceleration, deceleration, and direction changes, most land vehicles rely on friction. Accidents and loss of control can occur from abrupt traction decreases. Friction is not basic force in and of itself. Inter-surface adhesion, waviness, surface deformation, and surface pollution all contribute to dry friction. Because of the intricacy of these interactions, it is difficult to calculate friction from first principles, hence empirical approaches must be employed for analysis and theory building.
To know more about Friction
https://brainly.com/question/13000653
#SPJ4
A machine component is subjected to the forces and couples shown. The component is to be held in place by a single rivet that can resist a force but not a couple. The location of the rivet hole on line FG and line GH is..... 120 N 240 mm 70° 200 N 150 НЕ D H 50 mm 42 Nm 180N 520 mm C с 60 N 180 mm 40 Nm F С A B 50 mm - 50 mm 640 mm
The location of the rivet hole on line FG and line GH is at the point C. This is the point that is equidistant from the points F and G, which are both 180 mm away from C.
What is rivet?
Rivet is an open source library for building interactive stories. It allows developers to quickly create educational and entertainment stories with text, images, sound, and animations. It includes tools for creating branching stories, customizing visuals, and adding voice narration. Rivet is designed to help developers build digital stories for any platform, including mobile, web, and desktop. It is also designed to be lightweight and extensible, allowing developers to integrate their own custom features. It is suitable for both professionals and hobbyists, providing a simple, straightforward approach to creating educational and entertaining stories.
To learn more about rivet
https://brainly.com/question/27880700
#SPJ4
Using a Ring collar the 75-N force can act in the vertical plane at various angles theta. Determine the magnitude of the moment it produces about point A, plot the result of M(ordinate) and theta (abscissa) for 0<=theta<=180 and specify the angles that give the maximum and minimum moment.
Moment describes a force's propensity to generate rotation in the body it works upon. The product of the force's strength and the distance from it perpendicularly may be used to calculate the magnitude of the moment.
Moment is often seen as negative in a clockwise direction and positive in a anticlockwise direction.
Determine the force's vector form first. The moment around point A may therefore be calculated by taking the cross product of the position vector of AB and the vector form of force. The instant of force's magnitude may then be calculated. Calculate the angles by differentiating the magnitude of moment equation. Plot the graph by aligning the y-axis with the magnitude of the moment and the x-axis with the angle. In the end, compare the magnitude of the moment values to determine the angle with the smallest and largest moment.
Learn more about Moment here:
https://brainly.com/question/6278006
#SPJ4
Determine the force in member EI of the truss which serves to support the deck of a bridge.
Determine the force in member JI of the truss which serves to support the deck of a bridge.
The force in member EI are F_EIy - F_AB - F_BC - F_CD - F_DE = 0 and force in member JI are F_JIy - F_AB - F_BC - F_CD - F_DE - F_EF - F_FG = 0.
What is force?
Force is a physical quantity that is described as an influence on an object to cause a change in its motion or position. Force can cause an object to accelerate, decelerate, stop, or change direction. It is measured using the SI unit of newtons (N).
The forces in members EI and JI of the truss can be determined by solving the equations of equilibrium. The sum of the forces in the x-direction and the y-direction must be equal to zero.
For member EI:
F_EIx = 0
F_EIy - F_AB - F_BC - F_CD - F_DE = 0
For member JI:
F_JIx - F_GH - F_HI = 0
F_JIy - F_AB - F_BC - F_CD - F_DE - F_EF - F_FG = 0
Once the equations are solved for the forces in each member, the force in member EI and the force in member JI can be determined.
To learn more about force
https://brainly.com/question/14834487
#SPJ4
The SMART technique for problem solving
was introduced. In this approach, S stands for
specific
measurable
achievable
realistic
, M stands for
"
A stands for
"
R stands for
"
and T stands for
Note that the SMART technique for problem-solving and goal-setting was introduced. In this approach:
S stands for specificM for measurableA for achievableR for realisticand T stands for Time Bound.What is problem-solving?The act of describing a problem, discovering the origin of the problem, finding, prioritizing, and selecting alternatives for a solution, and executing a solution is known as problem-solving.
Employers value problem-solving abilities because they demonstrate a variety of other qualities such as logic, creativity, resilience, imagination, lateral thinking, and drive. It is a necessary ability for both your professional and personal life.
Learn more about Problem-Solving:
https://brainly.com/question/29438624
#SPJ1
An axial centric force of magnitude P=450kN is applied to the composite block shown by means of a rigid end plate.
Knowing that h=10mm, determine the normal stress in
(a) the brass core,
(b) the aluminum plates.
Answer:
Explanation:
To determine the normal stress in the brass core and aluminum plates, we can use the equation of equilibrium:
F = P = A_core * sigma_core + 2 * A_aluminum * sigma_aluminum
where F is the applied force, P is the magnitude of the force, A_core is the cross-sectional area of the brass core, sigma_core is the normal stress in the brass core, A_aluminum is the cross-sectional area of the aluminum plates, and sigma_aluminum is the normal stress in the aluminum plates.
We know that h = 10 mm, and since the cross-sectional area of the brass core is the same as that of the aluminum plates, we can find the cross-sectional area by multiplying h by the width of the block.
A_core = A_aluminum = h * width
We can now use the equation of equilibrium to find the normal stress in the brass core and aluminum plates:
450kN = A_core * sigma_core + 2 * A_aluminum * sigma_aluminum
sigma_core = P / A_core
sigma_aluminum = (P - A_core * sigma_core) / (2 * A_aluminum)
Note that you would need to know the width of the block in order to complete the calculation.
Backing strips that are to be removed after welding are normally ?
A. of the same material as the base metal
B. are made of a different material than the base metal
C. are rarely made of copper
D. ground off after welding
Typically, backing strips that will be removed after welding are constructed of a substance other than the base metal.
Do support bars need to be taken off?These backer bars cannot be removed, thus they must be left in place. For structures that are statically loaded, this is usually fine. In most cases, backing must be continuous.
What are the purposes of backing bars?At the base of a welded junction, a weld backer bar is used to support the molten weld metal, making it easier to obtain a fully penetrated joint. Before the groove weld is finished, a steel backing bar may be placed using a discontinuous/continuous fillet or tack weld.
To know more about welding visit:-
https://brainly.com/question/29654991
#SPJ1
1-3-12: Ladders/Stepbolts
The duty rating for these ladders is 200 pounds. Light-duty use is approved for Type III ladders. • Never exceed a ladder's duty rating when loading it. This could harm the ladder and result in injury.
Make sure there is no oil, grease, or other slipping risks on the surfaces for climbing and gripping. Make sure that everything that could cause you to slip is removed from your shoes. Make sure to use the ladder securely and at the proper angle. Use your ladder only on stable, level surfaces. The length of an extension ladder can range from 16 feet to well over 40 feet. A minimum of 3 feet should be left on each side of any non-self-supporting ladder.
Learn more about level here-
https://brainly.com/question/29692084
#SPJ4
The internal loading components over the cross section are as shown. What do the components A and B represent, respectively? Shear force; torque Normal force, torque Shear force; bending moment Normal force; bending moment Bending moment; bending moment Bending moment; torque Submit Previous Answers Request Answer
The internal loading components over the cross section are as shown. Bending moment; torque are the components A and B represent, respectively.
What is cross section?
Cross section is a two-dimensional representation of a three-dimensional object. It is used to represent the shape and structure of an object and can be found in many different fields. In engineering, cross sections are used to understand the internal structure of a component or system. In physics, cross section is used to study the interaction between particles, such as when studying the scattering of a particle beam. In geology, cross section is used to study the layers of rock and sedimentary deposits. In medical imaging, cross section is used to look at the internal structure of organs and tissues. Cross section can also be used to understand the structure of a material, such as the grain size of metal used in manufacturing. Cross section can also be used in art, architecture, and design to represent the shape of a structure.
To learn more about cross section
https://brainly.com/question/29742811
#SPJ4
Apply a solid line border, using the default line color, to the Pie chart legend.
The solid line border, using the default line color, to the Pie chart legend wil be: pieChart.legend.borderDash = [0, 0];
What is Pie chart?
A pie chart is a circular graph which is used to represent data. It is divided into sections or “slices” which are proportional to the quantity it represents. Pie charts are typically used to show the proportions of a whole, with the arc length of each slice or “wedge” proportional to the quantity it represents. Pie charts are useful for comparing the parts of a whole and can be used to show percentages or parts of a whole. Pie charts are simple to use and understand, but they are limited in the number of data points they can effectively represent. They are also limited in their ability to represent multiple variables. Pie charts are a great visual aid for representing data in a way that is easy to understand and can help people to make informed decisions.
To learn more about Pie chart
https://brainly.com/question/29611383
#SPJ4
determine the reactions at the supports a and b. ei is constant. neglect the effect of axial load.
The reactions at the supports a and b. ei is constant. neglect the effect of axial load will be 0 0.
What is axial load?
Axial load, also called thrust load, is a type of force that is applied along the axis of a component or structure. It is a compressive or tensile force which acts in the direction of the axis of an object. It is usually caused by an external force, such as an applied load, or by an internal force, such as the thrust generated by a motor. Axial loads can be static, meaning that the force is constant, or dynamic, meaning that the force changes over time. Axial load can cause deformation, or bending of the component. It can also cause stress, which can lead to fatigue and failure.
At support A:
Reaction in the x-direction: ei*(0-5) = -5ei
Reaction in the y-direction: 0
At support B:
Reaction in the x-direction: ei*(15-10) = 5ei
Reaction in the y-direction: 0
To learn more about axile load
https://brainly.com/question/15713784
#SPJ4
When jumping a dead battery, which car do you start first?
When jump starting a dead battery, the car with the working battery (the "donor car") should be started first and left running for a few minutes.
Then, the cables should be connected in the following order:
1) positive cable to the positive terminal of the dead battery,
2) other end of the positive cable to the positive terminal of the working battery,
3) negative cable to the negative terminal of the working battery, and
4) other end of the negative cable to a metal surface on the car with the dead battery (not to the negative terminal of the dead battery). Once the cables are connected, the car with the dead battery should be started. If the dead battery is too far gone, jump starting may not be enough to get it running again.
To learn more about dead battery, visit: https://brainly.com/question/30013310
#SPJ4
A rapid mixer disperse chemicals in a flow of 20,000 m3/day. The detention time is 30 s, and G is 700/s. What is the power required for this mixer?
The power required for this mixer is 14700000 Watts.
How can we determine the value of power required by the mixer?The power required for the mixer can be calculated using the following formula:
Power = (G^2 * Detention Time) / (Flow Rate * 8.34)
where G is the mixer's specific energy input in m^3/s^3, Detention Time is the time the liquid spends in the mixer in seconds, Flow Rate is the flow of the liquid through the mixer in m^3/s, and 8.34 is a constant.
Plugging in the given values:
Power = (700^2 * 30) / (20000/86400 * 8.34)
Power = (490000 * 30) / (0.002314814814814815)
Power = 14700000
So the power required for this mixer is 14700000 Watts.
Therefore, the correct answer is as given above. It can be concluded that the power required for this mixer is 14700000Watts.
learn more about Power: https://brainly.com/question/2248465
#SPJ1
QUESTION:
Which statement is true about portable fire extinguishers?
POSSIBLE ANSWERS:
OAir-pressurized water extinguishers put out electrical fires.
Dry chemical, sodium bicarbonate extinguishers put out most fires.
Dry chemical, mono ammonium phosphate extinguishers put out flammable liquid fires.
OCarbon dioxide extinguishers put out wood fires.
Submit Answer
Skip Question
Review/Edit Your Answer
Until emergency assistance arrives, portable fire extinguishers can put out or manage a fire.
When should Portable fire extinguishers be used?The use of portable fire extinguishers can put out or contain a fire until emergency assistance is received.
Utilize portable units exclusively for small flames or fires that are still in the early stages because their discharge times are often only a few seconds. Make a plan for a getaway. Avoid breathing in the extinguishing agent and smoke by keeping low to the ground.
Only use a portable fire extinguisher when a fire is small, restricted to a single area, and not made up of extremely flammable materials. If the fire becomes out of control, leave the premises right away and get assistance.
To learn more about fire extinguishers refer to:
https://brainly.com/question/17687941
#SPJ1
The four diagonals of a cube are drawn to create 6 square pyramids with the same base and height. The volume of the cube is (b)(b)(b). The height of each pyramid is h. Therefore, the volume of one pyramid must equal one-sixth the volume of the cube, or (b)(b)(2h) or bh. (b)(b)(6h) or bh. (b)(b)(6h) or bh. (b)(b)(2h) or bh.
The volume of one pyramid must equal one-sixth the volume of the cube, or 1/6(b)(b)(2h) or 1/3Bh. Thus, the correct option is A.
What is pyramid?A pyramid has three dimensions. A pyramid has a polygonal base and flat triangular faces that come together at a point known as the apex. By connecting the bases to the apex, a pyramid is formed.
The lateral face is formed by connecting each edge of the base to the apex. A pyramid with n sides has n+1 faces, n+1 vertices, and 2n edges.
Given that
The cube is divided into 6 same pyramids
Volume of pyramid = 1/3(S)(h)
Here,
S = B
So, Volume = 1/3(B)(h)
Also for cube
Volume of cube = b³ = b² ×2h
Volume of pyramid = 1/6th of Volume of cube
= 1/6 × b² ×2h
Thus, the volume of one pyramid must equal one-sixth the volume of the cube, or 1/6(b)(b)(2h) or 1/3Bh.
Learn more about pyramid
https://brainly.com/question/17615619
#SPJ4
For the frame and loading shown, determine the components of all forces acting on member ABD.
The component of forces acting on member ABD Aₓ and A[tex]_y[/tex] are 1390lb← and 740lb↑ respectively.
What is component of forces?A component is a piece that makes up something. Similar to how parts of a force are expressed by pointing in their directions, so does a force. These are typically categorised as vertical and horizontal components.
If I push you horizontally with some force, the horizontal force component is equal to the total force, and the vertical force component is equal to zero.
The horizontal component of force is F·cos30° and the vertical component is F·cos30 if a bullet is fired at, say, a 30° angle to the horizontal, and you draw a right-angled triangle with the bullet's path as the hypotenuse (though it's parabolic for long distances).
Calculate the reaction force acting at E
Take the moments about point A
[tex]\begin{gathered}\\\sum M_A=0 \\\left(E_x\right)(12)-(430)(15)-(310)(33)=0 \\E_x=1390 lb \\A_x=1390 lb\\\\\end{gathered}[/tex]
Now,
[tex]A_y - 430 -310 = 0\\A_y = 740 \ lb[/tex]
Take the moments about point B
[tex]\Sigma M_b =0\\(D-y)(18)- 740\times 6 = 0\\D-y=246.55\lb[/tex]
Substitute 2780 lb for Dx
[tex]B_x+D_x-1390=0[/tex]
[tex]\\B_x+2780-1390=0 \\B_x=-1390\ \text{lb}[/tex]
Consider the equilibrium equation along y axis in the member ABD, Substitute 246.66 lb for Dy
[tex]\\B_y+D_y+740=0\\B_y+246.66+740=0 \\B_y=-986.66 \mathrm{lb}\end{gathered}[/tex]
Using the free body diagram of member ABD and the equilibrium equations the component forces Bx and By have been calculated. Since we got negative values for Bx and By that means the direction of forces Bx and By are opposite to the assumed direction.
Thus, The component forces Aₓ and A[tex]_y[/tex] are 1390lb← and 740lb↑ respectively.
Learn more about component of forces
https://brainly.com/question/15443509
#SPJ4
As an assignment, students at HackerLand High School are to find a subsequence using two strings by performing the below-mentioned operation.
The subsequence using two strings by performing the below-mentioned operation: follow the step given below.
What is strings?Strings are a data type in computer science that represent text or sequence of characters. Strings are used to store words, sentences, and other textual information. Strings are created by enclosing characters in either single quotes (') or double quotes ("). In programming languages, strings are typically manipulated by a set of built-in functions that allow developers to compare, join, search, and modify strings. Strings are immutable, meaning that the characters in the string cannot be changed after the string is created. Strings are often used in applications where text-based data needs to be processed and manipulated.
step 1. Take two strings and compare them
step 2. Find the longest common subsequence between the two strings
step 3. Return the subsequence as a string.
To learn more about strings visit :
brainly.com/question/25324400
#SPJ4