Answer:
E = hv
Explanation:
Energy = planck constant × frequency
For the molecular compound dioxygen difluoride , what would you multiply "grams of O2F2 " by to get the units "molecules of O2F2 "
Answer:
Molecules of O₂F₂ = mass of O₂F₂ × (1 mole O₂F₂ / 70 g O₂F₂) × (6.02 × 10²³ molecules / one mole of O₂F₂)
Explanation:
The Avogadros constant gives the the number of specified entities in one mole of a substance. One mole of any substance contains 6.02 × 10²³ particles. Therefore, one mole of O₂F₂ contains 6.02 × 10²³ molecules.
Also, the molar mass of a substance is the mass in grams of one mole of that substance. It is obtained by summing the relative atomic masses of all the atoms of the elements in the substance. For O₂F₂, the molar mass = (2 × 16 + 2 × 19) g/mol = 70 g/mol
Converting to molecules of O₂F₂;
To convert from grams of a substance to molecules of that substance, multiply by the ratio of one mole and mass of one mole, and then by the number of molecules per mole.
Molecules of A = mass of A × (1 mole / mass of one mole) × (6.02 × 10²³ molecules / 1 mole)
Therefore,Molecules of O₂F₂ = mass of O₂F₂ × (1 mole O₂F₂ / 70 g O₂F₂) × (6.02 × 10²³ molecules /one mole of O₂F₂)
A. Directions:Describe ways on how to protect humans and plants and animals Choose your answer in the box and fill in the concept map below
Answer:
i) Humans - drinks lot of water
- use umbrella
- use hats and sunglasses
- apply sunblock when swimming
- wear rush guard
ii) Plants - water the plants
-put a shade on the plants
iii) Animals - provide pets with plenty of water
- place the animals under the tree during noon time
A chemist measures the amount of iodine solid produced during an experiment. He finds that of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to significant digits.
The question is incomplete, the complete question is:
A chemist measures the amount of iodine solid produced during an experiment. He finds that 8.31 g of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to the correct number of significant digits.
Answer: The number of moles of solid iodine produced is 0.0327 moles
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of solid iodine = 8.31 g
Molar mass of solid iodine = 253.8089 g/mol
Plugging values in equation 1:
[tex]\text{Moles of solid iodine}=\frac{8.31g}{253.8089g/mol}=0.0327mol[/tex]
Hence, the number of moles of solid iodine produced is 0.0327 moles
Calculate the moles of H3PO4 that reacted (8). Consult the coefficients in the balance chemical reaction to obtain the mole ratio. Show your calculation here.
Answer:
The number of moles of H₃PO₄ that reacted is 0.000343 moles
Note: Some data is missing. Data from the attachment is used for the calculationsinnthe explanation below.
Explanation:
The reaction is a neutralization reaction between NaOH and H₃PO₄. The equation of the reaction is given as follows:
3 NaOH + H₃PO₄ ---> Na₃PO₄ + 3 H₂O
The molarity of the NaOH solution is 0.238 mol/L.
Average volume of NaOH used during the titration to arrive to endpoint = (4.6 + 3.9 + 4.5) mL / 3 = 4.33 mL
Molarity is defined ratio of the number of moles of solute to the volume of solution. Mathematically, molarity = number of moles/volume in Litres
Number of moles of NaOH reacted = 0.238 mol/L × (4.33mL × 1 L/1000 mL)
Number of moles of NaOH = 0.00103 moles
From the equation of the reaction, 3 moles of NaOH reacts with 1 mole of H₃PO₄
0.00103 moles of NaOH will react with 0.00103 x 1/3 moles of H₃PO₄ = 0.000343 moles of H₃PO₄.
Therefore, number of moles of H₃PO₄ that reacted is 0.000343 moles
pls help ive been stuck on this question for a while im not good with chemistry lol.
Answer:
The answer would be B, putting thermal energy into something means you're adding heat into it.
Give the following reaction: ammonium nitrate—> dinitrogen monoxide + water.
a.) Write a complete balanced chemical equation.
b.) Calculate the number of molecules of water produced by 11.2g of ammonium nitrate
Answer:
a) NH₄NO₃ ⇒ N₂O + 2 H₂O
b) 1.69 × 10²³ molecules
Explanation:
Step 1: Write the balanced equation
NH₄NO₃ ⇒ N₂O + 2 H₂O
Step 2: Convert 11.2 g of NH₄NO₃ to moles
The molar mass of NH₄NO₃ is 80.04 g/mol.
11.2 g × 1 mol/80.04 g = 0.140 mol
Step 3: Calculate the moles of H₂O produced
0.140 mol NH₄NO₃ × 2 mol H₂O/1 mol NH₄NO₃ = 0.280 mol H₂O
Step 4: Calculate the number of molecules in 0.280 moles of water
We will use Avogadro's number.
0.280 mol × 6.02 × 10²³ molecules/1 mol = 1.69 × 10²³ molecules
Question 1
1 pts
How many mols of bromine are present in 35.7g of
Tin(IV) bromate?
Answer:
n = 0.0814 mol
Explanation:
Given mass, m = 35.7g
The molar mass of Tin(IV) bromate, M = 438.33 g/mol
We need to find the number of moles of bromine. We know that,
No. of moles = given mass/molar mass
So,
[tex]n=\dfrac{35.7}{438.33}\\\\n=0.0814\ mol[/tex]
So, there are 0.0814 moles of bromine in 35.7g of Tin(IV) bromate.
Ethylene glycol flows at 0.01 kg/s through a 3-mm diameter, thin-walled tube. The tube is coiled and submerged in well-stirred water bath maintained at 25°C. If the fluid enters the tube at 85°C, what heat rate and tube length are required for the fluid to leave at 35°C?
Answer:
heat rate= 1281W
length = 15.8m
Explanation:
we have this data to answer this question with
Tmi = 85 degrees
Tmo = 35 degrees
Ts = 25 dgrees
flow rate = 25 degrees
using engine oil property from table a-5
Tm = Tmo - TMi/2 = 333k
u =0.522x10⁻²
k = 0.26
pr = 51.3
cp = 2562 J/kg.k
mcp(Tmo-Tmi) =
0.01 x 2562(35-85)
= 1281 W
we find the change in Tim
= [(35-25)-(85-25)]/ln[(35-25)/(85-25)]
= -50/ln0.167
= -50/-1.78976
= 27.9°c
we finf the required reynold number
4x0.01/πx0.003x0.522x10⁻²
= 0.04/0.00004921
= 812.8
= 813
we find approximate correlation
NuD = hd/k
NuD = 3.66
3.66 = 0.003D/0.26
cross multiply
0.003D = 3.66x0.26
D = 3.66x0.26/0.003
= 317.2
As = 1281/317x27.9
= 0.145
As = πDL
L = As/πD
= 0.145/π0.003
= 0.145/0.009429
L = 15.378
The tools shown in the diagram are used for gardening Each tool is made up
of two levers that are attached to each other. The handles are the input arms,
and the cutting blades are the output armo
Hand shears
Lopper
Which tool has a greater mechanical advantage, and why?
A. The lopper, because the input work is the same as the output work
B. The hand shears, because their shorter handles transfer force
more quickly to the cutting blade
C. The hand shears, because you can apply less total force to the
handles with one hand
D. The lopper, because its longer handles can produce more output
force with less input force
Answer:
D
Explanation:
The longer handles distribute the force across a longer distance.
Sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are ________partially miscible . This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are__________
Answer: Sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are both partially miscible. This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are miscible.
Explanation:
When a substance (solute) dissolves partially in a solvent then it is known as partially miscible in the solvent. In such cases, a small amount of solute remains at the bottom of solution.
If a solute dissolves completely in solvent like water such that only one layer is seen in the solution then it means that the solute is miscible in solvent.
Thus, we can conclude that sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are both partially miscible. This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are miscible.
Explain the sample prep for IR
Answer:
) Making a sandwich To prepare a liquid sample to IR analysis, firstly place a drop of the liquid on the face of a highly polished salt plate (such as NaCl, AgCl or KBr), then place a second plate on top of the first plate so as to spread the liquid in a thin layer between the plates, and clamps the plates together.
A cylinder contains 26.5 L of oxygen gas at a pressure of 1.7 atm and a temperature of 280 K. How much gas (in moles) is in the cylinder?
Answer:
The appropriate answer is "1.96 mol".
Explanation:
The given values are:
Volume,
V = 26.5 L
Pressure,
P = 1.7 atm
Temperature,
T = 280 K
Now,
The number of moles (n) will be:
= [tex]\frac{PV}{RT}[/tex]
By substituting the values, we get
= [tex]\frac{1.7\times 26.5}{0.0821\times 280}[/tex]
= [tex]\frac{45.05}{22.988}[/tex]
= [tex]1.96 \ mol[/tex]
The data shows the number of years that 30 employees worked for an insurance company before retirement. is the population mean for the number of years worked, and % of the employees worked for the company for at least 10 years. (Round off your answers to the nearest integer.)
Answer:
14
73%
Explanation:
The mean Number of years worked :
. (sum of service years) / employees in the
(8+13+15+3+13+28+4+12+4+26+29+3+10+3+17+13+15+15+23+13+12+1+14+14+17+16+7+27+18+24) /
(417 / 30)
= 13.9 years
= 14 years
The percentage of employees who have worked for atleast 10 years :
Number of employees with service years ≥ 10 years = 22 employees
Total number of employees
Percentage (%) = (22 / 30= * 100% = 0.7333 * 100% = 73.33% = 73%
In an exothermic reaction, reactants are __ products.
a more stable than
b equal to
c equally stable as
d less stable than
Answer:
Less stable
Explanation:
When an exothermic reaction occurs, the reactants have a greater energy level than the outputs. The products, in other respects, are more stable than that of the reactants.
The outcomes of an exothermic reaction have a lower energy to react. The enthalpy of a process is the difference between some of the activation energy and the power of the products.
A soluble unknown has contaminated your sample. It absorbs the same wavelength as your analyte, Allura Red dye. How will this affect your results, and what type of error is introduced
Answer:
The explanation as per the given query is presented in the following paragraph.
Explanation:
The Allura Reds Pigment or coloring increases the absorption by absorbing at around a very similar wavelength as that of the analysis.Therefore, the approximated analysis concentration or its intensity seemed substantially higher than that of the authentic one. Some positive mistake is going to exist.Thus the above is the correct explanation.
The measured absorbance will be higher, thereby creating systematic error.
Absorbance can be defined as the value or quantity of light absorbed by a given sample.The presence of impurity with a similar absorption wavelength will increase the absorbance. Moreover, systematic error is a type of error that is repeated along with different processes of measurement.In conclusion, the measured absorbance will be higher, thereby creating systematic error.
Learn more in:
https://brainly.com/question/14919298
determine the mass in grams of 3.75 x 10^21 atoms of zinc. (the mass of one mole of zinc is 65.39 g)
Answer: The mass in [tex]3.75 \times 10^{21}[/tex] atoms of zinc is 0.405 g.
Explanation:
Given: Atoms of zinc = [tex]3.75 \times 10^{21}[/tex]
It is known that 1 mole of every substance contains [tex]6.022 \times 10^{23}[/tex] atoms. So, the number of moles in given number of atoms is as follows.
[tex]Moles = \frac{3.75 \times 10^{21}}{6.022 \times 10^{23}}\\= 0.622 \times 10^{-2}\\= 0.0062 mol[/tex]
As moles is the mass of a substance divided by its molar mass. So, mass of zinc (molar mass = 65.39 g/mol) is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\0.0062 mol = \frac{mass}{65.39 g}\\mass = 0.405 g[/tex]
Thus, we can conclude that the mass in [tex]3.75 \times 10^{21}[/tex] atoms of zinc is 0.405 g.
0.300 moles of sodium nitrite are needed for a reaction. The solution is 0.450 M. How many mL are needed
Answer:
The solution is 0.450 M. How many mL are needed?
- 0.667 mL
Explanation:
Which of the following statements correctly explains why bromination reactions are more selective than chlorination reactions.
a. bromine radical is less stable than chlorine radical, so it is more reactive and less choosy
b. bromine radical is more stable than chlorine radical, so it is more reactive and less choosy
c. bromine radical is more stable than chlorine radical, so it is less reactive and more choosy
d. bromine radical is less stable than chlorine radical, so it is less reactive and more choosy
e. relative radical stability is 3' radicals > 2" radicals> 1 radicals when bromine radicals snatch hydrogens from alkanes, but when chlorine radicals snatch hydrogens the resulting alkyl radical stability is 3 radicals < 2 radicals< 1' radicals
Answer: A bromine radical is more stable than chlorine radical, so it is less reactive and more choosy.
Explanation:
A chlorine atom being more electronegative in nature is able to attract a hydrogen atom more readily towards itself as compared to a bromine atom.
Since bromine is less electronegative in nature so bromine will be more selective as a hydrogen abstracting agent. As a result, bromine radical is more stable in nature than chlorine radical.
Thus, we can conclude that bromine radical is more stable than chlorine radical, so it is less reactive and more choosy.
Draw bond-line formulas of all dichloro derivatives that might be formed when 1-chloro-2,2,3,3,-tetramethylpentane is allowed to react with Cl 2 under UV irradiation. For each structure, indicate, with an asterisk, any stereocenters that might be present. Predcit the percentage of each product using the relative reactivities 3 0 = 5.3, 2 0 = 3.6, 1 0 = 1
Answer:
Explanation:
This is a halogenation reaction i.e substitution or replacement of a single or more than a single hydrogen atom in the organic alkane compound with the halogen(here it is chlorine).
The chlorination of 1-chloro-2,2,3,3-tetramethylpentane under UV light resulted in the formation of five (5) dichloro derivatives which are shown in the image attached below.
Also, the compounds containing a stereocenter (i.e a location within the compound composing of various substituents in which the interchangeability of these substituents has the tendency of resulting into a stereoisomer) are indicated with an asterisk in the image below.
From the image below:
compound 1 ⇒ 1,1-dichloro-2,2,3,3-tetramethylpentane = 2° C
∴
The given relative reactivity rate for 2° = 3.6x
For compound 2 ⇒ 1,4-dichloro-2,2,3,3-tetramethylpentane = 2° = 3.6x
For compound 3 ⇒ 1,5-dichloro-2,2,3,3-tetramethylpentane = 1° = 1x
For compound 4 ⇒ 1-chloro-2-chloromethyl-2,3,3-trimethylpentane
= 1° = 1x
For compound 5 ⇒ 1-chloro-3-chloromethyl-2,2,3-trimethylpentane
= 1° = 1x
As such, we have:
2(3.6x) + 3(1x) = 100
7.2x + 3x = 100
10.2x = 100
x = 100/10.2
x = 9.803°
∴
For compound (1) = 3.6(9.803) = 35.3%
For compound (2) = 3.6(9.803) = 35.3%
For compound (3) = 1(9.803) = 9.803°%
For compound (4) = 1(9.803) = 9.803°%
For compound (5) = 1(9.803) = 9.803°%
How many grams of solute are present in 635mL of 0.450 M KBr?
Answer:
34.03 g
Explanation:
We'll begin by converting 635 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
635 mL = 635 mL × 1 L / 1000 mL
635 mL = 0.635 L
Thus, 635 mL is equivalent to 0.635 L
Next, we shall determine the number of mole of the solute (KBr) in the solution. This can be obtained as follow:
Volume = 0.635 L
Molarity = 0.450 M
Mole of KBr =?
Mole = Molarity × Volume
Mole of KBr = 0.450 × 0.635
Mole of KBr = 0.286 mole
Finally, we shall determine the mass of 0.286 mole of KBr. This can be obtained as follow:
Mole of KBr = 0.286 mole
Molar mass of KBr = 39 + 80
= 119 g/mol
Mass of KBr =?
Mass = mole × molar mass
Mass of KBr = 0.286 × 119
Mass of KBr = 34.03 g
Thus, the mass of the solute (KBr) in the solution is 34.03 g
Gaseous methane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 9.6 g of methane is mixed with 64.9 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
21.6 g
Explanation:
The reaction that takes place is:
CH₄ + 2O₂ → CO₂ + 2H₂OFirst we convert the given masses of both reactants into moles, using their respective molar masses:
9.6 g CH₄ ÷ 16 g/mol = 0.6 mol CH₄64.9 g O₂ ÷ 32 g/mol = 2.03 mol O₂0.6 moles of CH₄ would react completely with (2 * 0.6) 1.2 moles of O₂. As there are more O₂ moles than required, O₂ is the reactant in excess and CH₄ is the limiting reactant.
Now we calculate how many moles of water are produced, using the number of moles of the limiting reactant:
0.6 mol CH₄ * [tex]\frac{2molH_2O}{1molCH_4}[/tex] = 1.2 mol H₂OFinally we convert 1.2 moles of water into grams, using its molar mass:
1.2 mol * 18 g/mol = 21.6 gwhat does LPG stand for? mention one important source of LPG give sort answer
Answer:
liquefied petroleum gas
LPG is prepared by refining natural gas. it is made by refining crude oil or from extracted natural gas streams as they emerge from the ground.
the pressure of a sample of gas at constant volume is 942 kPa at 338K. what will the pressure be 293k?
Explanation:
4 tctcgcgcgctctchvvyctctc
I need help with the practice question at the bottom. Thank you.
As the gas expands on the surrounding, work is done by the system.
Therefore, W= -279J
Absorbtion of heat,q= +216J
∆U=q+W = (216-279)J= -63J
Which safety feature works to slow down nuclear-fission chain reactions?
A. Proliferation
B. Control rods
C. Cooling rods
D. Fuel rods
Answer:
The answer is
-control rods
Answer:
B. Control Rods.... via A P E X
Which atomic model states that it is impossible to know the exact location of electrons around the nucleus?
Answer:
Bohr Model is the correct answer
Answer:
Electron -Cloud Model
Explanation:
Just took the quiz got 100%
I have 50.00 mL of 0.100 M ethyl amine (C2H5NH2). I gradually add a solution of 0.025 M nitric acid (HNO3) to the ethyl amine solution.
Required:
What is the pH after the addition of a total of 201 mL of the nitric acid?
Answer:
4.00 is the pH of the mixture
Explanation:
The ethyl amine reacts with HNO3 as follows:
C2H5NH2 + HNO3 → C2H5NH3⁺ + NO3⁻
To solve this question we need to find the moles of ethyl amine and the moles of HNO3:
Moles C2H5NH2:
0.0500L * (0.100mol/L) = 0.00500 moles ethyl amine
Moles HNO3:
0.201L * (0.025mol/L) = 0.005025 moles HNO3
That means HNO3 is in excess. The moles in excess are:
0.005025 moles HNO3 - 0.00500 moles ethyl amine =
2.5x10⁻⁵ moles HNO₃
In 50 + 201mL = 251mL = 0.251L:
2.5x10⁻⁵ moles HNO₃ / 0.251L = 9.96x10⁻⁵M = [H+]
As pH = -log [H+]
pH = -log 9.96x10⁻⁵M
pH = 4.00 is the pH of the mixture
In order for a substitution reaction to take place, at a minimum, __________ and ___________ are needed. carbocation rearrangement proton transfer loss of a leaving group nucleophilic attack
Answer: In order for a substitution reaction to take place, at a minimum, loss of a leaving group and nucleophilic attack are needed.
Explanation:
When one group in a molecule is replaced by another one then it is called a substitution reaction.
For a substitution reaction reaction to occur at a minimum, it is necessary to have a leaving group that helps in creating a carbocation and hence a nucleophile can easily attack.
For example, [tex]CH_{4} + Cl_{2} + h\nu \rightarrow CH_{3}Cl + HCl[/tex]
Thus, we can conclude that in order for a substitution reaction to take place, at a minimum, loss of a leaving group and nucleophilic attack are needed.
Which of the following statements is correct concerning the reaction 2 A + B → 2 C + 2 D?
1. The reaction is second-order overall
2. The reaction is third order overall
3. The rate is equal to k[A]²[B]
4. The rate is equal to k[A][B]
5. It cannot be determined given this information
Answer:
2.The reaction is third order overall
Explanation:
THIS ANSWER IS CORRECT
MARK ME AS BRAINLIEST
classify each of the following as a pure substance or a mixture.
a) baking soda
b) ice
c)blueberry muffin
d) zink
Answer:
c
Explanation:
its c because it has multiple mixture blueberries flower water and others thats why i says c