Which equation is a correctly written thermochemical equation?
OC3H8 (g) +502 (g) → 3CO2 (g) + 4H₂O (1), AH= -2,220 kJ/mol
OFe (s) + O2 (g) → Fe₂O3 (s), AH= -3,926 kJ
ONH₂Cl → NH₂ + + Cl
O2C8H18 + 250216CO2 + 18H₂O, AH=-5,471 kJ/mol

There are approximately 0.005302 moles of NOs in 3.19 × 10^16 molecules.

Mole is an SI unit used to measure the amount of any substance.

To calculate the number of moles of NOs in 3.19 × 10^16 molecules, we need to use Avogadro's number, which is 6.022 × 10^23 molecules per mole.

First, we need to convert the number of molecules to moles using the formula:

moles = molecules / Avogadro's number

moles of NOs = 3.19 × 10^16 molecules / 6.022 × 10^23 molecules per mole

moles of NOs = 0.005302 moles (rounded to 4 significant figures)

Therefore, there are approximately 0.005302 moles of NOs in 3.19 × 10^16 molecules.

Learn more about moles here : brainly.com/question/29367909

#SPJ1

The number of moles present in 3.19×10¹⁶ molecules of nitrogen dioxide, NO₂ is 5.30×10⁻⁸ mole

The number of moles present in 3.19×10¹⁶ molecules of NO₂ can be obtained by using the Avogadro's hypothesis as illustrated below:

From Avogadro's hypothesis,

6.022×10²³ molecules = 1 mole of NO₂

Therefore,

3.19×10¹⁶ molecules = 3.19×10¹⁶  / 6.022×10²³

3.19×10¹⁶ molecules = 5.30×10⁻⁸ mole of NO₂

Thus, we can conclude that the number of mole is 5.30×10⁻⁸ mole

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

The activation energy of the reverse reaction is also 63 kJ/mol, as it is equal to the activation energy of the forward reaction.

The activation energy of the reverse reaction can be determined using the relationship between the activation energy and the enthalpy of reaction for the forward and reverse reactions:

ΔH_reverse = -ΔH_forward

Ea_reverse = Ea_forward

Since the enthalpy of reaction for the forward reaction is -388 kJ/mol, the enthalpy of reaction for the reverse reaction is:

ΔH_reverse = -ΔH_forward = -(-388 kJ/mol) = 388 kJ/mol

Learn more about activation energy here: https://brainly.com/question/26724488

#SPJ1

Answer:

The solution in the test tube would turn pink earlier with the more concentrated NaOH solution.

This is because the concentration of the NaOH solution is directly proportional to the number of moles of NaOH per unit volume of the solution.

So, with a more concentrated NaOH solution (1.0 M compared to 0.5 M), each mL of NaOH solution contains twice as many moles of NaOH.

Therefore, it would take half as much volume (i.e., 12.4 mL instead of 24.8 mL) of the 1.0 M NaOH solution to react with the same number of moles of the unknown acid as the 0.5 M NaOH solution.

The charge on the surface of the coagulated colloidal particles is negative.

The source of the charge is likely due to the dissociation of the sodium and potassium salts in water, which results in the formation of ions.

The counter-ion layer is composed of the cations that balance the charge on the negatively charged colloidal particles.

Charge is a fundamental property of matter that describes the amount of electrical energy present in a particle, atom, or molecule. It is a property that can be either positive or negative and is measured in units of coulombs (C).

The charge of a particle can affect how it interacts with other charged particles. For example, particles with opposite charges are attracted to each other, while particles with the same charge repel each other. The interaction between charged particles is fundamental to many chemical and physical phenomena, such as electrostatic interactions, chemical bonding, and the behavior of electrical currents.

Learn more about charge here: https://brainly.com/question/12095123

#SPJ1

The hydroxide ion concentration, [OH-], for a solution with a pH of 4.65 is approximately 3.55 x [tex]10^{-10}[/tex]M.

What is concentration?

To calculate the hydroxide ion concentration, [OH-], from the given pH, we can use the following relationship:

pH + pOH = 14

where pOH is the negative logarithm of the hydroxide ion concentration:

pOH = -log[OH-]

Rearranging the first equation, we get:

pOH = 14 - pH

Substituting the given pH value of 4.65, we get:

pOH = 14 - 4.65 = 9.35

Finally, we can calculate the hydroxide ion concentration, [OH-], by taking the antilogarithm (inverse log) of the pOH value:

[OH-] = [tex]10^{(-pOH)}[/tex] = [tex]10^{-9.35}[/tex] = 3.55 x [tex]10^{-10}[/tex] M

Therefore, the hydroxide ion concentration, [OH-], for a solution with a pH of 4.65 is approximately 3.55 x [tex]10^{-10}[/tex] M.

To know more about concentration, visit:

https://brainly.com/question/10725862

#SPJ1

Answer:

Neptunium with atomic mass 235 and atomic number 93

Explanation:

elimination of electron increases positive charge on an atom

Answer:

First, we need to convert the volume of the solution from milliliters (mL) to liters (L) since molarity is expressed in moles of solute per liter of solution.

30 mL = 0.03 L

Next, we can use the formula for molarity:

Molarity = moles of solute / liters of solution

Plugging in the given values:

Molarity = 0.26 moles / 0.03 L = 8.67 M

Therefore, the concentration of the vinegar solution is 8.67 M.

Strong bases like sodium ethoxide (NaOEt) or sodium hydroxide (NaOH) are used to treat 2-bromooctane, which then goes through an elimination process (also known as dehydrohalogenation) to produce various alkenes.

Ethene, propene, butene, and pentene are the first four alkenes.

Alkenes are a group of unsaturated hydrocarbons (i.e., molecules with solely carbon and hydrogen) that include at least one double bond from carbon to carbon. Olefins is a different name for alkenes. Due to the double bond, alkenes are more reactive than alkanes.

Both the hydrocarbons alkene and alkyne are unsaturated.

Whereas two Carbon atoms in Alkyne are joined by a triple bond, two Carbon atoms in Alkene only have a double bond.

learn more about Alkenes

https://brainly.com/question/10113466

#SPJ1

In the stepwise formation of [Cu(NH3)4]2 from [Cu(H2O)4]2, [Cu(NH3)4]2+ is formed in the second step.

A coordination compound is formed by the combination of a central metal ion or atom and one or more ligands. The central metal ion or atom is typically positively charged, and the ligands are generally negatively charged or uncharged molecules or ions that have at least one electron pair accessible for coordination.

The coordination complex is represented by a square bracket around the central metal ion, and the ligands are connected to it with a comma.Copper(II) sulfate (CuSO4) is a well-known example of a coordination compound. The Cu2+ ion is the central metal ion, and the four H2O molecules are the ligands in this case. It is represented as [Cu(H2O)4]2+.

In the stepwise formation of [Cu(NH3)4]2 from [Cu(H2O)4]2, the following steps are involved:In the first step, four H2O molecules are replaced by four NH3 molecules. The product of this step is [Cu(NH3)4(H2O)2]2+.The second step is the replacement of the remaining two H2O molecules by NH3.

This step produces the desired [Cu(NH3)4]2+ coordination compound.In short, the copper ion in [Cu(H2O)4]2+ loses two H2O molecules and gains four NH3 molecules, forming [Cu(NH3)4(H2O)2]2+. Then, two more H2O molecules are replaced by NH3, resulting in the formation of [Cu(NH3)4]2+. Therefore, [Cu(NH3)4]2+ is formed in the second step.

For more such questions on coordination compound

https://brainly.com/question/17162675

#SPJ11

CCl4 is the only answer choice that would likely dissolve in pentane. So the correct option is A.

The question asks which of the following would likely dissolve in pentane (C5H12). The answer choices are CCl4, MNO, HF, CH3OH, and NH3.
Pentane is a hydrocarbon with a boiling point of 36.1 °C and is insoluble in water. It has a low polarity and does not form strong hydrogen bonds, so molecules that are nonpolar will dissolve in it.
CCl4 is a nonpolar molecule and would therefore be soluble in pentane. MNO is an ionic compound, so it would not be soluble in pentane. HF is a polar molecule and is also insoluble in pentane. CH3OH is also a polar molecule and is insoluble in pentane. NH3 is a polar molecule, and is slightly soluble in pentane, but not as much as CCl4.
So the correct option is A.

For more such questions on pentane

https://brainly.com/question/29274559

#SPJ11

The vapor pressure for methanol at 44.6°C is 36.2 kPa.

The Clausius-Clapeyron equation has a relation to the vapor pressure of a substance to its enthalpy of vaporization and temperature and is expressed :

ln(P2/P1) = -(ΔHvap/R) x (1/T2 - 1/T1)

given values are:

P1 = 101.3 kPa

T1 = 100.0°C = 373.2 K

ΔHvap = 40.7 kJ/mol

R = 8.314 J/(mol K)

r P2 at T2 = 44.6°C = 317.8 K:

ln(P2/101.3) = -(40.7 x 10^3 J/mol / (8.314 J/(mol K) x 317.8 K)) x (1/317.8 K - 1/373.2 K)

ln(P2/101.3) = -3.04

P2/101.3 = e^(-3.04)

P2 = 36.2 kPa

Learn more about vapor pressure at: https://brainly.com/question/2693029

#SPJ1

There is no limiting reactant because both reactants produce the same amount of products indicating that neither reactant is in excess and both are fully consumed in the reaction.

The limiting reagent is described as  the reactant that is completely used up in a reaction, and thus determines when the reaction stops.

calculating the number of moles of each reactant of the equation:

C2H4 + 3 O2 -> 2 CO2 + 2 H2O.

Moles of C2H4: not given, assume 1 mole

Moles of O2: 3 moles (given in the equation)

Moles of CO2 produced by 1 mole of C2H4: 2 moles (from the balanced equation)

Moles of H2O produced by 1 mole of C2H4: 2 moles (from the balanced equation)

Moles of CO2 produced by 3 moles of O2: 2 x 3/3 = 2 moles (from the balanced equation)

Moles of H2O produced by 3 moles of O2: 2 x 3/3 = 2 moles (from the balanced equation)

In conclusion, both reactants produce the same amount of products (2 moles of CO2 and 2 moles of H2O).

Learn more about limiting reagent at: https://brainly.com/question/30991317

#SPJ1

Answer: This reaction is the combustion, in which a hydrocarbon reacts with oxygen gas to form carbon dioxide and water.

Explanation: balanced combustion reaction for C6H6 Equation: 2C6H6(l)+15O2(g)--> 12CO2+6H2O(l)_6542 KJ.

In the given reactions, the species being oxidized and reduced are: Cr+ is being oxidized and Sn4+ is being reduced.

The oxidation number of Cr+ changes from 0 to +3 and the oxidation number of Sn4+ changes from +4 to +2. Hence, Cr+ is the reducing agent and Sn4+ is the oxidizing agent.Fe2+ is being oxidized and Zn(s) is being reduced. The oxidation number of Fe2+ changes from +2 to 0 and the oxidation number of Zn(s) changes from 0 to +2. Hence, Fe2+ is the reducing agent and Zn(s) is the oxidizing agent.2As(s) is being oxidized and Cl2(g) is being reduced. The oxidation number of As changes from 0 to +3 and the oxidation number of Cl changes from 0 to -1.

Hence, As is the reducing agent and Cl2 is the oxidizing agent. The historical definition of Reduction: Reduction is a chemical reaction process that has been known since ancient times. One of the earliest definitions of reduction was that it is the process of removing oxygen from a compound or adding hydrogen to it. This is known as the "phlogiston theory," which was prevalent in the 17th and 18th centuries. Definition of Oxidation and Reduction in terms of electron transfer: Oxidation is a process in which an atom or ion loses one or more electrons, resulting in an increase in its oxidation number. Reduction, on the other hand, is a process in which an atom or ion gains one or more electrons, resulting in a decrease in its oxidation number. These processes involve the transfer of electrons from one species to another.

To learn more about Oxidized :

https://brainly.com/question/17130031

#SPJ11

The most commonly used standard voltage cell is the standard hydrogen electrode (SHE), which has an assigned potential of 0 volts at all temperatures.

What is  Standard Voltage cell?

A standard voltage cell is a reference cell used to measure the electrode potential or electromotive force (EMF) of an electrochemical cell. The standard voltage cell has a fixed potential difference between its electrodes that does not change with time, temperature, or other factors. It is used as a reference point to compare the EMF of other cells, and is the basis for the standard electrode potentials used in electrochemistry.

What is Electrolyte?

An electrolyte is a substance that conducts an electric current when dissolved in a solvent, typically water. It is a solution containing ions that can move freely, allowing the solution to conduct electricity.  In the context of biology, electrolytes play an important role in various physiological processes, such as maintaining proper fluid balance, transmitting nerve impulses, and contracting muscles.

Learn more about Standard Voltage cell from given link

https://brainly.com/question/15983077

#SPJ1

There are four (4) elements in the chemical formula given above.

Chemical formula in chemistry is a notation indicating the number of atoms of each element present in a compound.

The chemical formula of a substance shows the types and number of elements present in such substance.

According to this question, the chemical formula of a substance is given. The elements present in the compound based on their symbols are as follows:

Therefore, there are four elements in the substance.

Learn more about chemical formula at: https://brainly.com/question/29031056

#SPJ1

Answer:

4897 J

Explanation:

The heat transferred to the surroundings, q_surr, can be calculated using the equation:

q_surr = -q_rxn = -CmΔT

where C is the specific heat capacity of the mixture (assumed to be the same as water, 4.184 J/g°C), m is the mass of the mixture (which we can calculate using the density, assuming that the volumes are additive), and ΔT is the change in temperature (in Celsius).

First, let's calculate the mass of the mixture:

density of water = 1.00 g/cm^3

volume of mixture = volume of acid + volume of base = 106 mL + 157 mL = 263 mL = 0.263 L

mass of mixture = density of water x volume of mixture = 1.00 g/cm^3 x 0.263 L = 263 g

Next, let's calculate the change in temperature:

ΔT = final temperature - initial temperature = 27.29°C - 22.94°C = 4.35°C

Now we can calculate the heat transferred to the surroundings:

q_surr = -CmΔT

q_surr = -(4.184 J/g°C) x (263 g) x (4.35°C)

q_surr = -4897 J

Note that the negative sign indicates that heat is lost by the system to the surroundings. Therefore, the heat transferred to the surroundings, q_surr, is 4897 J.

Many elements, such as a molecule's size, structure, and content as well as the environment in which it is located, can affect the electrostatic potential of its surface.

Electrostatic interactions can be divided into three categories: hydrogen bonds, London dispersion forces, and dipole-dipole interactions. Van der Waals forces are the aggregate name for the first two interactions.

The electrostatic force between two mass particles has the same shape as the gravitational force, with the exception that it is governed by the magnitudes of the charges on the particles (+1 for the proton and 1 for the electron), not the masses of the particles, as is the case with the gravitational force.

To know more about molecule's visit:-

https://brainly.com/question/19556990

#SPJ1

Typically, you must identify the x- and y-axes, which represent the two variables being measured or compared, in order to label a graph.

The graph's shape must be examined in order to determine the type of relationship between the variables. The relationship is considered to be linear if the graph depicts a straight line. The relationship is non-linear if the graph shows a curve. To determine whether the relationship is positive or negative, you would also need to look at the line's slope and direction. The relationship is positive if the line slopes upwards from left to right; this indicates that as one variable rises, so does the other. The relationship is negative if the line slopes downward from left to right, indicating that one variable increases while the other decreases.

To know more about Variables, visit:

https://brainly.com/question/17344045

#SPJ1

The following statements about the ionization of the side chain of glutamine in water is true are Glutamine has a positively charged form with a pK, around 10, Glutamine is usually deprotonated but will gain a proton at low pH, Glutamine is usually protonated but will lose a proton at high pH.

Glutamine is an amino acid that is considered to be a critical nutrient for cell growth and division, as well as protein synthesis. It is an amino acid that is commonly found in proteins, which are essential components of the human body. Glutamine is an amino acid that contains an amide group and an acidic side chain, making it a polar and hydrophilic amino acid. It has a chemical formula of [tex]C_{5}H_{10}N_{2}O_{3}[/tex].

Ionization is the process of removing or adding one or more electrons from an atom or molecule, giving it a net electrical charge. When an atom loses one or more electrons, it becomes positively charged, whereas when it gains one or more electrons, it becomes negatively charged.

The pH is a measure of acidity or basicity in a solution, with a scale ranging from 0 to 14. A pH of 7 is considered neutral, while anything below 7 is acidic and anything above 7 is basic. The term "pH" refers to "power of hydrogen." It represents the concentration of hydrogen ions in a solution. The lower the pH, the higher the concentration of hydrogen ions, and the higher the acidity.

Know more about Glutamine here :

https://brainly.com/question/14953153

#SPJ11

The correct answer is "two molecules of ATP are needed to 'activate' glucose".

In the first step of glycolysis, glucose is converted into glucose-6-phosphate, which requires the input of ATP. This reaction is catalyzed by the enzyme hexokinase. Therefore, two molecules of ATP are used in the early steps of glycolysis to activate glucose and convert it into glucose-6-phosphate. In the later steps of glycolysis, four molecules of ATP are produced by substrate-level phosphorylation, but since two molecules of ATP were used in the beginning, the net production of ATP is only two molecules per glucose molecule.

It is also important to note that glycolysis is the first step of both aerobic and anaerobic respiration and can occur without oxygen being present. However, the subsequent steps of cellular respiration, such as the Krebs cycle and electron transport chain, require oxygen in aerobic respiration to produce more ATP.

What is an ATP?

ATP stands for Adenosine Triphosphate, which is a molecule that carries energy within cells. It is often referred to as the "energy currency" of the cell because it powers many cellular processes by releasing its stored energy when it is hydrolyzed to ADP (Adenosine Diphosphate) and inorganic phosphate.

To know more about ATP, visit:

https://brainly.com/question/174043

#SPJ1

Every atom shell of electrons will have its own unique set of quantum numbers. So the correct option is A.

This is due to the fact that each electron has a unique set of four quantum numbers that define its position and energy in an atom: principal quantum number (n), angular momentum quantum number (l), magnetic quantum number (mℓ), and spin quantum number (ms). These quantum numbers determine the state of the electron and its position within the atom. Each electron has a unique set of quantum numbers, making each atom shell of electrons have its own unique set of quantum numbers.

So the correct option is A.

For more such questions on quantum numbers

https://brainly.com/question/25786066

#SPJ11

Answer:

See Below.

Explanation:

Problem 1

Let x be the mass of 15% solution needed and y be the mass of 20% solution needed. Then, we have the following system of equations:

x + y = 200 (total mass of solution)

0.15x + 0.20y = 0.17(200) (total amount of solute)

Solving this system of equations gives:

x = 60 g (mass of 15% solution)

y = 140 g (mass of 20% solution)

Therefore, 60 g of 15% solution and 140 g of 20% solution are needed to prepare 200 g of 17% solution.

Problem 2

Let x be the mass of 18% solution needed and y be the mass of 5% solution needed. Then, we have the following system of equations:

x + y = 300 (total mass of solution)

0.18x + 0.05y = 0.07(300) (total amount of solute)

Solving this system of equations gives:

x = 120 g (mass of 18% solution)

y = 180 g (mass of 5% solution)

Therefore, 120 g of 18% solution and 180 g of 5% solution are needed to prepare 300 g of 7% solution.

Problem 3

The total mass of the final solution is

200 g + 350 g = 550 g

The total amount of solute in the final solution is:

0.15(200 g) + 0.20(350 g) = 95 g + 70 g = 165 g

Therefore, the mass percentage of the final solution is:

(mass of solute / total mass of solution) x 100% = (165 g / 550 g) x 100% = 30%

Therefore, the mass percentage of the final solution is 30%.

Problem 4

The total mass of the final solution is

300 g + 35 g = 335 g

The total amount of solute in the final solution is:

0.15(300 g) + 35 g = 75 g + 35 g = 110 g

Therefore, the mass percentage of the final solution is:

(mass of solute / total mass of solution) x 100% = (110 g / 335 g) x 100% = 32.8%

Therefore, the mass percentage of the final solution is 32.8%.

Problem 5

The total mass of the final solution is

400 g + 150 g = 550 g

The total amount of solute in the final solution is

0.25(400 g) = 100 g

Therefore, the mass percentage of the final solution is

(mass of solute / total mass of solution) x 100% = (100 g / 550 g) x 100% = 18.2%

Therefore, the mass percentage of the final solution is 18.2%.

Molarity of NaOH for 28.0 mL of HCl = 0.560 M and Molarity of NaOH for 17.4 mL of H3PO4 = 0.910 M.

The molarity of sodium hydroxide if 20.0 mL of the solution is neutralized by 28.0 mL of HCl and 17.4 mL of H3PO4 are 0.560 M and 0.910 M, respectively.

A neutralization reaction is a chemical reaction between an acid and a base that results in the formation of salt and water. An acid and a base combine to form a salt and water in a neutralization reaction. Neutralization reactions are essential in life, as they aid in digestion, medical treatments, and other chemical reactions in the body. The balanced chemical equation for the neutralization reaction of sodium hydroxide with hydrochloric acid is:

NaOH + HCl → NaCl + H2O

The balanced chemical equation for the neutralization reaction of sodium hydroxide with phosphoric acid is:

3 NaOH + H3PO4 → Na3PO4 + 3 H2O

Molarity (M) = moles of solute / liters of solution

1. Calculate the number of moles of the acid. Using the given volume of the acid and its molarity, calculate the number of moles of acid.

Moles of acid = Molarity × Volume of acid (in liters)

2. Determine the number of moles of NaOH used in the reaction. Using the balanced equation, determine the number of moles of NaOH that reacted with the number of moles of acid.

Number of moles of NaOH = Number of moles of acid (from step 1)

3. Calculate the molarity of the NaOH solution.

Molarity of NaOH = Number of moles of NaOH / Volume of NaOH (in liters)Molarity of NaOH for 28.0 mL of HCl

= 0.560 M

Molarity of NaOH for 17.4 mL of H3PO4 = 0.910 M

For more such questions on Molarity , Visit:

https://brainly.com/question/14469428

#SPJ11

Using CH3NH2 and CH3NH3Cl, one may simulate the blood's buffering properties. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer system.

Carbonic acid and sodium bicarbonate. Hint: Human blood has a buffer of bicarbonate anion (HCO3) and carbonic acid (H2CO3) to keep the blood's pH between 7.35 and 7.45. Blood pH values higher or lower than 7.8 or 6.8 can be fatal.

Bicarbonate anion and hydronium are in equilibrium with carbonic acid in this buffer. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer.

To know more about acid visit:-

brainly.com/question/28175742

#SPJ1

Answer:

CH3NH2 and CH3NH3Cl

Explanation:

Methylamine (CH3NH2) is an organic base. In order to produce a basic buffer solution similar to blood, we can combine this base with a soluble salt of its conjugate acid, such as CH3NH3Cl. The solution of KOH and H2O would not be a good buffer because KOH is a strong base. The solution of HF and NaF is a buffer, but the pKa of HF is about 3.2, which is far from the pH of blood, 7.4.

Answer:

The correct electron dot diagram for Al is option A:

•Al:

:AI:

Explanation:

The first two statements are false, whereas the last statement, which says that pressure and volume of a gas are inversely related, is true.

Statement 1: This claim was incorrect because, according to the ideal gas law, PV=nRT, pressure (P) and volume (V) are inversely proportional to each other at a constant temperature (T) and amount of gas (n). This means that as pressure increases, volume decreases. This relationship is known as Boyle's law. Therefore, the statement that pressure has no effect on volume of a gas is false.

Statement 2: This claim was incorrect because, pressure and volume of a gas are inversely related according to Boyle's law, which states that at a constant temperature, the pressure of a gas is inversely proportional to its volume. This means that if the pressure of a gas increases, its volume will decrease, and if the pressure decreases, the volume will increase, as long as the temperature remains constant.

Statement 3: This claim was correct because, According to Boyle's law, the pressure and volume of a gas are inversely proportional to each other, which means that when the pressure of a gas increases, its volume will decrease and vice versa, as long as the temperature and the number of particles in the gas are kept constant. This relationship is expressed mathematically as P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.

To find out more about gas laws, visit:

https://brainly.com/question/27009857

#SPJ1

Oxygen (O) has 6 valence electrons, and each fluorine (F) atom has 7 valence electrons. Therefore, the total number of valence electrons in OF2 is:

1 × 6 (oxygen) + 2 × 7 (fluorine) = 20 valence electrons

To draw the Lewis structure, we can follow these steps:

Place the atoms in the molecule and connect them with a single bond:

F

|

O -- F

Arrange the remaining electrons around the atoms to satisfy the octet rule (or duet rule for hydrogen). Since oxygen is more electronegative than fluorine, we place the remaining electrons around oxygen first:

F

|

O -- F

:

The colon represents a lone pair of electrons on oxygen.

Distribute the remaining electrons to the fluorine atoms:

F

:|

O -- F

:

Each fluorine atom now has a complete octet.

Check that all atoms have a complete octet. In this case, both oxygen and fluorine atoms have a complete octet.

Therefore, the Lewis structure of OF2 is:

r

Copy code

F

:|

O -- F

:

with 2 lone pairs on oxygen and 3 lone pairs on each fluorine atom.

An atom is the smallest unit of matter that retains the chemical properties of an element. It is composed of a nucleus containing positively charged protons and neutral neutrons, surrounded by negatively charged electrons.

To know more about atom visit :

https://brainly.com/question/30898688

#SPJ1

122.5 grams of oxalic add dihydrate (MW = 126.07 g/mole) and disodium oxalate (MW = 133.99 g/mole) were required to prepare this buffer if the total oxalate concentration is 0.115 M.

Weak acids are defined as acids that don't completely dissociate in solution. It can be explained as any acid that is not a strong acid. The strength of a weak acid depends on how much it gets dissociates and the more it dissociates, the stronger the acid. The mass of the weak acid in a solution of a certain pH can be determined by calculating the original concentration of the acid after calculating the concentration of the hydrogen ions with the help of the pH value of the solution.

The Concentration of oxalate ion is  0.115 M.

pKa1 is 1.250.

pKa2 is 4.266.

pH is 5.193.

Molarity = (mass / molar mass) / 1 / volume in liter

The molar mass is 126.07g/mole.

Mass = Molarity × molar mass × Volume in liter

Mass=0.972 M × 126.07 g/mole × 1.00 L

        = 122.5 gram

To learn more about concentration

https://brainly.com/question/17206790

#SPJ4

The complete question is,

A buffer prepared by dissolving oxalic add dihydrate (H2C2O4⋅2H2O) and disodium oxalate (Na2C2O4) in 1.00 L of water has a pH of 5.193. How many grams of oxalic add dihydrate (MW = 126.07 g/mole) and disodium oxalate (MW = 133.99 g/mole) were required to prepare this buffer if the total oxalate concentration is 0.115 M? Oxalic acid has pKa values of 1.250 (pKa1) and 4.266 (pKa2).