The choice names two ways nonmetallic minerals can be used industrial processes and gems
option A
Non-metallic minerals can be utilized as jewels and in industrial operations. Some non-metallic minerals are highly valuable, well-cut, and fetch a premium on the market. Ruby and tourmaline are two examples. Most non-metallic minerals are employed as raw materials in industrial processes. Due to their weak conductivity, these materials cannot be utilized as ones. Because they lack metallic links inside their lattices, they cannot be utilized for wiring.
Since they are of excellent gem grade, they are best employed in industrial operations and for items of value. Numerous industrial uses exist for calcium carbonate in its different forms. In addition to being utilized as a construction material, limestone also serves as a flux in metallurgy and is used to produce calcium cyanamide and lime.
To know more about nonmetallic minerals on
https://brainly.com/question/19976113
#SPJ4
Base your answers to following questions, 1-6 on the information below.
Tiger Woods is standing at the tee after his knee surgery and can't wait to take out the driver and hit the golf ball down the fairway with a little slice (because of the dog leg right). If he hits the golf ball at
an angle of 30 degrees with the horizontal and a velocity of 196 m/s, find the following
1. The initial vertical component of the velocity is:
2. The initial horizontal component of the velocity is:
3. When the golf ball reaches a maximum height, the vertical component of the velocity is:
4. The time of the flight of the golf ball is:
5. The maximum height of the golf ball is:
6. The horizontal range of the golf ball is:
Answer: hghj
Explanation:
fygvbufvtdcrsxeasxtrydtcufyvigubohljnk
what scientific applications can spectrophotometry be used for?
Spectrophotometry applications can be used to: measure the absorbance, reflectance and transmission of light by gases, liquids, and solids.
What is spectrophotometry?Branch of electromagnetic spectroscopy concerned with the quantitative measurement of the reflection or transmission properties of a material as a function of wavelength is called spectrophotometry.
Spectrophotometry is the quantitative measurement of the interaction of ultraviolet, visible, and infrared radiation with the material and has a impact on a wide field of science and technology.
Spectrophotometry is a method to measure how much chemical substance absorbs light by measuring the intensity of light as beam of light passes through sample solution.
To know more about spectrophotometry, refer
https://brainly.com/question/24864511
#SPJ4
How to convert eV in kJ/mole
To convert energy in electron volts (eV) to kilojoules per mole (kJ/mol), you can use the following conversion factor: 1 eV = 96.485 kJ/mol
In physics, an electron volt is the measure of an amount of kinetic energy gained by a single electron accelerating from rest through an electric potential difference of one volt in vacuum
To convert a given energy in eV to kJ/mol, you simply need to multiply the energy in eV by the conversion factor.
For example, let's say we want to convert an energy of 5 eV to kJ/mol. We can use the conversion factor to get:
5 eV x (96.485 kJ/mol / 1 eV) = 482.425 kJ/mol
Therefore, 5 eV is equivalent to 482.425 kJ/mol.
For such more questions Electron Volt
https://brainly.com/question/14667454
#SPJ4
If the partition coefficient K for an organic compound being extracted is 9 in favor of the organic phase over the aqueous, what fraction of solute remains in the aqueous phase after 1 extraction if the same volume of solvent is used for each phase? A.0.9B.0.01c.0.9D.0.001E.0.1F,0.09
If the partition coefficient K for an organic compound being extracted is 9 in favor of the organic phase over the aqueous the correct answer is E.0.1
The fraction of solute remaining in the aqueous phase after one extraction can be calculated using the following equation:
Fraction of solute in aqueous phase = 1 / (1 + K)
where K is the partition coefficient.
Substituting the given value of K = 9, we get:
Fraction of solute in aqueous phase = 1 / (1 + 9)
= 1 / 10
= 0.1
Therefore, the fraction of solute remaining in the aqueous phase after one extraction is 0.1, which is option E.
To learn more about coefficient K here:
https://brainly.com/question/28894063
#SPJ4
Why doesn’t the gravitational pull between the Sun and the planets cause the planets to fall into the Sun?
Multiple choice:
The inertia of the planets is in a direction away from the sun.
The Sun’s rotation pushes the planets out.
The Sun’s magnetic fields are pushing out.
The background stars pull back on the planets.
The correct option is: a. The inertia of the planets is in a direction away from the Sun.
The explanation the planets in our planetary group don't fall into the Sun is because of a harmony between the gravitational draw of the Sun and the latency of the planets. As the planets move in their circles around the Sun, they are continually falling towards it, yet their forward movement holds them back from being pulled in. This is like the way in which a ball tossed in the air will keep on pushing ahead even as it is pulled descending by gravity.
Different choices recorded, like the Sun's revolution, attractive fields, or the draw of foundation stars, don't assume a critical part in keeping the planets in their circles. While the Sun's pivot and attractive fields really do significantly affect the movement of articles in the nearby planet group, they are not sufficiently able to neutralize the gravitational draw of the Sun. Likewise, while the draw of foundation stars can affect the movement of items in the planetary group, they are excessively far away and excessively frail to fundamentally affect the planets' circles around the Sun.
To learn more about gravitational pull, refer:
https://brainly.com/question/15638446
#SPJ4
What is the acceleration of a bike which increases its speed from 0 to 40 ft/s in 4 seconds?
The acceleration of a bike which increases its speed from 0 to 40 ft/s in 4 seconds will be 3 m/s².
How do you determine the acceleration of the bike?Given, initial speed (u) = 0
Final speed (v) = 40 ft/s = 12 m/s
Time taken = 4 seconds
From the equation v = u + at, we have
12 = 0 + a x 4
12 = 4a
a = 3 m/s²
The acceleration formula is what?The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s²). Since acceleration is a vector quantity, both its magnitude and its direction are included.
To learn more about acceleration visit:
brainly.com/question/13154163
#SPJ1
what is the second messenger in the g protein-coupled protein kinase pathway stimulated by epinephrine in liver cells?
The second messenger in the G protein-coupled protein kinase pathway stimulated by epinephrine in liver cells is cyclic AMP (cAMP).
The G protein-coupled protein kinase pathway is a signaling pathway that is stimulated by epinephrine in liver cells.
When epinephrine binds to its receptor on the cell membrane, it activates a G-protein, which in turn activates adenylyl cyclase.
This enzyme then produces cyclic AMP (cAMP), which is the second messenger in this pathway. cAMP binds to and activates protein kinase A, which then phosphorylates proteins in the cell to initiate a response.
This response can be the activation of certain enzymes, the inhibition of other enzymes, or the modification of gene expression.
cAMP is a key signaling molecule that is involved in many biological processes and is essential for the proper functioning of liver cells.
Without cAMP, cells would be unable to respond to epinephrine, and the G protein-coupled protein kinase pathway would not be activated.
To know more about epinephrine,
https://brainly.com/question/29307133
#SPJ4
Fill The Blank! when a cloud forms, latent heat is ____ the atmosphere and the surrounding air temperature ____.
When a cloud forms, latent heat is released into the atmosphere and the surrounding air temperature decreases.
What is latent heat?Latent heat is the energy that a substance absorbs or releases during a change in its physical state (phase) but does not change its temperature. The latent heat involved in melting solids or freezing liquids is referred to as the "heat of fusion," while the latent heat involved in vaporizing solids or liquids or condensing vapor is referred to as the "heat of vaporization." The quantity of heat (in joules or calories) per mole or unit mass of the substance undergoing a change in state is the typical way to represent latent heat. The effort necessary to overcome the forces holding together atoms or molecules in a substance gives rise to latent heat.
To know more about latent heat, check out:
https://brainly.com/question/5401454
#SPJ4
A bus is moving at an average speed of 70 mph on the motorway. The journey takes 3 hours 30 minutes. How far did the bus travel?.
The bus travelled a total of 245 miles.
We can use the formula:
distance = time x speed
where:
Speed is measured in miles per hour (mph) or metres per second (m/s), and distance is measured in miles or meters.
Time is measured in terms of hours or seconds.
To calculate an object's speed, you must first know how far it has travelled and how long it took to travel that distance.
To calculate the distance that the bus travelled.
first we have to convert the time into hours.
3 hours and 30 minutes = 3.5 hours (since 30 minutes is half an hour).
Now we can use the formula:
distance = time x speed
245 miles = distance
= 70 mph x 3.5 hours
As a result, the bus travelled a total of 245 miles.
To learn more about speed.
https://brainly.com/question/28224010
#SPJ4
what is the temperature in the mesa?
Mesa temperature is 65°F with a partly overcast sky and a SE wind speed of 5 to 10 mph according to the weather forecast.
The weather in Mesa, Arizona, in February. Daily high temperatures seldom drop below 59°F or rise over 82°F, rising by 5°F from 68°F to 73°F. Daily lows rise by 4°F, from 45 to 49, seldom dropping below 37 or rising beyond 56.
In Phoenix, most days in February reach temperatures of exceeding 60 °F (16 °C). This month, the city has seen temperatures in the 80s °F (above 27 °C) on an average of 4 days. Nonetheless, the temperature seldom rises beyond 90 °F (32 °C). On average, there are two evenings each week when the temperature drops to or below 40 °F (4 °C).
Learn more about the temperature at
https://brainly.com/question/29846434
#SPJ4
A hydrochloric (hcl) solution has a molar concentration of 0. 0045 m, calculate the and ph of the solution. Remember that kw= 1. 0x10-14m2.
To calculate the pH of a hydrochloric acid solution with a molar concentration of 0.0045 M, we can use the following formula:
How to calculate pH?pH = -log[H+]
where [H+] is the concentration of hydrogen ions in the solution, which can be calculated from the dissociation of HCl:
HCl → H+ + Cl-
The molar concentration of H+ is equal to the molar concentration of HCl, which is 0.0045 M.
[H+] = 0.0045 M
Substituting this value into the pH formula, we get:
pH = -log(0.0045) ≈ 2.35
To calculate the pOH of the solution, we can use the relationship:
pH + pOH = 14
pOH = 14 - pH ≈ 11.65
Finally, we can use the relationship between pH, pOH, and the ion product constant of water (Kw) to calculate the concentration of hydroxide ions ([OH-]) in the solution:
Kw = [H+][OH-] = 1.0 × 10^-14 M^2
[OH-] = Kw / [H+] = (1.0 × 10^-14) / (0.0045) ≈ 2.22 × 10^-12 M
Therefore, the pH of the hydrochloric acid solution is approximately 2.35, the pOH is approximately 11.65, and the concentration of hydroxide ions is approximately 2.22 × 10^-12 M.
To know more about pH, check out :
https://brainly.com/question/172153
#SPJ4
The pH of the hydrochloric acid solution is approximately 2.35, the pOH is approximately 11.65, and the concentration of hydroxide ions is approximately [tex]2.22 \times 10^{-12} M[/tex].
How to calculate pH?pH = -log[H+]
where [H+] is the concentration of hydrogen ions in the solution, which can be calculated from the dissociation of HCl:
HCl → H+ + Cl-
The molar concentration of H+ is equal to the molar concentration of HCl, which is 0.0045 M.
[H+] = 0.0045 M
Substituting this value into the pH formula, we get:
pH = -log(0.0045) ≈ 2.35
To calculate the pOH of the solution, we can use the relationship:
pH + pOH = 14
pOH = 14 - pH ≈ 11.65
Finally, we can use the relationship between pH, pOH, and the ion product constant of water (Kw) to calculate the concentration of hydroxide ions ([OH-]) in the solution:
[tex]Kw = [H+][OH-] = 1.0 \times 10^{-14} M^2\\[OH-] = Kw / [H+] = (1.0 \times 10^{-14}) / (0.0045) ≈ 2.22 \times 10^{-12} M[/tex]
Therefore, the pH of the hydrochloric acid solution is approximately 2.35, the pOH is approximately 11.65, and the concentration of hydroxide ions is approximately [tex]2.22 \times 10^{-12} M[/tex].
To know more about pH, check out :
brainly.com/question/172153
#SPJ4
An astronaut who fell into a black hole would be stretched be-causea. the gravity is so strong.b. the gravity changes dramatically over a short distance.c. time is slower near the event horizon.d. black holes rotate rapidly, dragging spacetime with them.
The correct option is B, An Astronaut who fell into a black hole would be stretched because the gravity changes dramatically over a short distance.
A black hole is a region in space where the gravitational pull is so strong that nothing, not even light, can escape. It is created when a massive star runs out of fuel and collapses under its own gravity. The intense gravity warps space and time, creating a point of singularity where all matter is compressed into an infinitely small, dense point.
The boundary around the black hole where the gravitational pull is so strong that even light cannot escape is called the event horizon. Anything that crosses this boundary is said to be swallowed by the black hole, never to be seen again. The study of black holes has led to new insights into the nature of space, time, and gravity, and has opened up new avenues of research in astrophysics and cosmology.
To learn more about Black hole visit here:
brainly.com/question/27723143
#SPJ4
In the ocean surrounding Antarctica, there are fish that survive the cold water by using a molecule made of glycoproteins that circulates the blood and keeps it from freezing. Certain kinds of worms that live in the Arctic ocean also make antifreeze proteins that help them live in icy water.
answer choices
Divergent Evolution
Convergent Evolution
Coevolution
Convergent evolution
Fish living in the Antarctic and worms living in the Arctic both contain antifreeze proteins.
The process of convergent evolution is the separate emergence of similar characteristics by unrelated species in response to related selective pressures. Antifreeze proteins are produced by worms in the Arctic and fish in the Antarctic to help them both survive in the freezing waters. The proteins in the two species differ, but they both have the same purpose, which is to stop the blood and tissues from freezing. The fact that the fish and worms are not closely related and exist in various places of the earth makes this an exceptional example of convergent evolution. The development of antifreeze proteins in these species demonstrates the strong selective forces that occur in these harsh conditions and emphasises how adaptable living things are.
Learn more about antifreeze here:
https://brainly.com/question/28472715
#SPJ4
A stonecutter's chisel has an edge area of 0. 45 cm2. If the chisel is struck with a force of 46 n, what is the pressure exerted on the stone?.
The pressure exerted on the stone by the chisel is 1,022,222.22 Pa.
We know that
1 cm = 0.01 m, so 0.45 cm^2 = 0.45 x (0.01 m)^2 = 0.000045 m^2.
We can calculate the pressure exerted on the stone using the formula:
pressure = force / area
Substituting the given values, we get:
pressure = 46 N / 0.000045 m^2
pressure = 1,022,222.22 Pa (or N/m^2)
Pressure is the force exerted per unit area. It is a physical quantity that is crucial in a wide range of applications, including meteorology, engineering, and physics. Pressure can be defined as the amount of force exerted on a surface divided by the area of that surface. For example, when a person stands on a scale, the weight of their body is distributed over the area of the scale, creating pressure.
Pressure is typically measured in units of pascals (Pa), which is equivalent to one newton per square meter. Other units used to express pressure include atmospheres (atm), pounds per square inch (psi), and millimeters of mercury (mmHg). In fluids, pressure increases with depth due to the weight of the fluid above, and this principle is important in a wide range of applications, such as measuring blood pressure, designing water distribution systems, and predicting weather patterns.
To learn more about Pressure visit here:
brainly.com/question/29341536
#SPJ4
A bicyclist is finishing her repair of a flat tire when a friend rides by with a constant speed of 4.8 m/s. Two seconds later the bicyclist hops on her bike and accelerates at 2.2 m/s2 until she catches up with her friend.
A. How much time, counting from the moment she hops on her bike, does it take until she catches up?
B. How far does she travel in this time?
Answer:
Explanation:
(4.8 m/s)t = 1/2(2.2 m/s²)t²
2(4.8 m/s)t / (2.2 m/s²) = t²
2(4.8 m/s) / (2.2 m/s²) = t²/t
t = 4.36 s
A. total time it takes to catch up to friend = 4.36s + 2s = 6.36s (took her 2 sec to hop on the bike and get going)
B. Distance she travels is the same distance the friend travels in 4.36 s = (4.8 m/s)(4.36 s) = 1/2(2.2 m/s²)(4.36 s)² = 20.9 m
SKETCHPAD
Two friends push with great force against a rock. One friend pushes to the right
with 15 N of force. The other friend pushes in the opposite direction with 15 N of
force. Label the forces in the picture below.
The forces applied or exerted by the two friends will create an equilibrium force on the rock.
What are the two forces exerted by the tow friends?
The friend on the right will exert a rightward force
The friend on the left will exert a leftward force.
Since both forces are equal the rock will remain at equilibrium.
Equilibrium force refers to a state in which the net force acting on an object is zero, meaning the object is either at rest or moving at a constant velocity. This means that the sum of all forces acting on an object is equal to zero and there is no net acceleration. The object is said to be in a state of mechanical equilibrium.
Learn more about equilibrium force here: https://brainly.com/question/517289
#SPJ1
When a boxer is moving away from a punch, the force experienced is reduced because:________
When a boxer is moving away from a punch, the force experienced is reduced because the impact time, or the duration of the impact, is increased.
Why the force is reduced?When an object is in motion and is suddenly subjected to a force, the magnitude of the force depends on both the strength of the force and the time over which it is applied. The longer the impact time, the lower the average force experienced by the object.
By moving away from the punch, the boxer effectively increases the impact time, spreading out the force of the punch over a longer period of time and reducing the average force experienced. This is similar to the idea of a "glancing blow," in which a moving object experiences a reduced force if it is only partially hit, as opposed to being hit head-on.
This is why boxers often move away from punches and try to dodge them, rather than trying to absorb them head-on. By reducing the force of the punch, they can avoid being knocked out or seriously injured, and can stay in the fight.
To know more about force , visit:
https://brainly.com/question/12785175
#SPJ4
If the acceleration of an object is zero, then its speed must be what?
If the acceleration of an object is zero, then its velocity may not necessarily be zero. The object could still be moving with a constant velocity.
What is acceleration?Acceleration is a measure of the change in velocity of an object over time. It is a vector quantity and is defined as the rate of change of velocity with respect to time.
Acceleration has units of meters per second squared [tex](m/s^2)[/tex]in the SI system and can be calculated as the change in velocity divided by the change in time, or
a = (vf - vi) / t
where vf is the final velocity, vi is the initial velocity, and t is the time interval over which the velocity changed.
In physics, acceleration plays a key role in understanding the motion of objects and the forces that affect them. It is used in many fundamental equations, such as Newton's second law of motion, which states that the acceleration of an object is proportional to the net force acting on it.
To know more about acceleration , visit:
brainly.com/question/460763
#SPJ4
how did people’s general way of thinking change as a result of the scientific revolution?
The Scientific Revolution was a period of great change in the way people thought about the natural world and their place in it.
What is Scientific Revolution?Prior to this time, most people relied on tradition, religious doctrine, and ancient authorities for answers to their questions about the natural world. However, with the development of new scientific methods and technologies, there was a shift towards more empirical, evidence-based ways of thinking.One of the key changes brought about by the Scientific Revolution was a new emphasis on experimentation and observation. Scientists began to use instruments like telescopes and microscopes to observe the natural world more closely, and they developed new methods for collecting and analyzing data. This approach led to a greater emphasis on evidence-based reasoning, and it helped to promote the idea that scientific knowledge should be based on observable, repeatable experiments.The Scientific Revolution also had a profound impact on people's view of the universe and their place in it. Prior to this time, most people believed in a geocentric model of the universe, with the Earth at the center and the stars and planets revolving around it.
To know more about Scientific revolution , check out :
https://brainly.com/question/14231443
#SPJ4
can somebody help with solving this )
Answer:
59.8amperes
Explanation:
firstly calculate for resistance in the series connection by adding up the two resistors in series to get 15ohms
secondly calculate for the total resistance by adding up the the resistors in parallel together
thirdly you solve for current using the formula I=V/R
Object 1 in the diagram at the right represents a proton moving perpendicularly to a magnetic field of magnitude 0.55T at a speed of 5.6 x 10^3 m/s.
a. Draw and label a vector showing the direction of the force on the proton.
b. Calculate the magnitude of the force.
Answer:
Explanation:
a. The direction of the force on the proton can be determined using the right-hand rule for magnetic fields. If the right hand is oriented such that the fingers point in the direction of the magnetic field (from north to south in this case) and the thumb points in the direction of the proton's velocity (to the right in this case), then the palm of the hand will point in the direction of the force on the proton. Using this rule, we can see that the force on the proton points downward, as shown in the diagram below:
N
|
<----|---->
| | |
| | |
|____|____|
|
S
b. The magnitude of the force on the proton can be calculated using the formula:
F = qvB
where F is the magnitude of the force, q is the charge of the particle, v is its velocity, and B is the magnetic field strength. For a proton, which has a charge of +1.6 x 10^-19 coulombs, the magnitude of the force is:
F = (1.6 x 10^-19 C)(5.6 x 10^3 m/s)(0.55 T) = 4.5 x 10^-14 N
Therefore, the magnitude of the force on the proton is 4.5 x 10^-14 N.
In The Figure Above, Find The Equivalent Capacitance Of The Combination. Assume That C1 = 15.0 ΜF, C2 = 5.00 ΜF, And C3 = 4.00 ΜF.uploaded imageIn the figure above, find the equivalent capacitance of the combination. Assume that C1 = 15.0 µF, C2 = 5.00 µF, and C3 = 4.00 µF.
To find the equivalent capacitance of the combination, we can use the formula for capacitance in a series circuit and a parallel circuit.
How to find equivalent capacitance?let's find the capacitance of the two capacitors C2 and C3 in parallel. The capacitance in parallel is given by:
C23 = C2 + C3 = 5.00 µF + 4.00 µF = 9.00 µF
Next, let's find the capacitance of the capacitors C1 and C23 in series. The capacitance in series is given by:
1/C123 = 1/C1 + 1/C23
Substituting the values, we get:
1/C123 = 1/15.0 µF + 1/9.00 µF
Simplifying, we get:
1/C123 = (3/45 + 5/45) µF^-1 = 8/45 µF^-1
Therefore, the capacitance of the combination is:
C123 = 45/8 µF = 5.625 µF
So the equivalent capacitance of the combination is 5.625 µF.
To know more about equivalent capacitance , check out :
https://brainly.com/question/5626146
#SPJ4
Suppose a current-carrying wire has a cross-sectional area that gradually becomes smaller along the wire so that the wire has the shape of a very long, truncated cone. How does the drift speed vary along the wire? a. It doesn't change b. It slows down as the cross section becomes larger. c. It speeds up as the cross section becomes larger. d. More information is needed.
The drift speed varies along the wire It slows down as the cross-section becomes larger. So option b is correct.
The drift speed of charges in a current-carrying wire depends on the electric field, which is related to the potential difference (voltage) between the ends of the wire and the wire's resistance.
The resistance of a wire is directly proportional to its length and inversely proportional to its cross-sectional area, according to Ohm's law.
In a wire that has a cross-sectional area that gradually becomes smaller along the wire, the wire's resistance would increase along the length of the wire due to the decrease in cross-sectional area.
This would cause the potential difference between the ends of the wire to decrease along the length of the wire as well.
As the potential difference decreases, the electric field and the drift speed of charges would also decrease. Therefore, the drift speed of charges in the wire would slow down as the cross-sectional area becomes larger.
So the answer is (b) it slows down as the cross section becomes larger.
To learn more about Ohm's law:
https://brainly.com/question/14296509
#SPJ4
oxygen moves between the respiratory system and the circlatory system when it transfers from.. to...
Oxygen moves between the respiratory system and the circulatory system when it transfers from the bronchi to the capillaries. The correct option is d.
What is the respiratory system?The capillaries (small blood vessels) lining the alveolar walls allow oxygen to diffuse from the alveoli to the blood throughout this process.
Hemoglobin in red blood cells absorbs oxygen as it enters the bloodstream. Where the blood and lungs exchange gases are known as the "alveoli." Bronchi are the air passage of the lungs. It is a large passage that passes from the trachea to the lung.
Therefore, the correct option is d. bronchi, capillaries.
To learn more about the respiratory system, visit here:
https://brainly.com/question/8754264
#SPJ1
The question is incomplete. The missing options are given below:
alveoli, capillaries
bronchi, trachea
capillaries, veins
bronchi, capillaries
How fast does a car travel in .75 hours if it’s moving at a constant sided of 45mi an hour
what would be the reading on the ammeter that is connected next to the 6.0 ω resistor?
The reading on the ammeter that is connected next to the 6.0 ω resistor would be 1.85 A.
To determine the reading on the ammeter that is connected in series with a 6.0 Ω resistor, we would need to know the voltage of the circuit and any other resistors that are in the circuit.
Assuming that the circuit consists only of a voltage source and a 6.0 Ω resistor in series with an ammeter, and that the voltage source has a constant voltage of V volts, then we can use Ohm's law to calculate the current flowing through the circuit:
I = V / R
where,
I = the current in amperes,
V = the voltage in volts,
R = the total resistance of the circuit in ohms.
In this case, the total resistance of the circuit is simply the sum of the resistance of the 6.0 Ω resistor and the resistance of the ammeter. Let's say that the resistance of the ammeter is Ra in ohms. Then the total resistance of the circuit would be:
Rtot = 6.0 Ω + Ra
The current flowing through the circuit would be:
I = V / Rtot
The reading on the ammeter would be the same as the current flowing through it. So to find the reading on the ammeter, we simply need to solve for I.
For example, if the voltage source has a voltage of 12 volts and the ammeter has a resistance of 0.5 ohms, then the total resistance of the circuit would be:
Rtot = 6.0 Ω + 0.5 Ω = 6.5 Ω
The current flowing through the circuit would be:
I = V / Rtot = 12 V / 6.5 Ω = 1.85 A
So the reading on the ammeter would be 1.85 A.
Here you can learn more about Ohm's law
https://brainly.com/question/30695617
#SPJ4
What are most asteroids made of ?
Asteroids are made up of rock. The most common constituents are clay and silicate. It usually have some metals like nickel or iron in them.
Asteroids are also known as mini planets. They are rocky remnants left over 4.6 billion of years, formed during the formation of solar system. Currently there are 1,266,744 known asteroids in the solar system. Most of them are found in the asteroid belt between Mars and Jupiter.
The composition of asteroids are determined by its distance from the sun. Ones that are nearer to sun have mainly carbon in them. It also have trace amounts of nitrogen, hydrogen and oxygen. The farther the asteroids, the constituent is rocky silicates. Some metallic asteroids are made up of 80% of iron, 20% of elements like nickel, palladium, platinum, gold, osmium, ruthenium and rhodium.
So most of the asteroids are made up of silicate, carbon and metals like iron.
For more information regarding Asteroids, kindly refer
https://brainly.com/question/14315808
#SPJ4
Which of the following statements about stars that produce similar spectral patterns is true?
a
The stars have about the same mass.
b
The stars are about the same size.
c
The stars are the same age.
d
The stars are made of similar elements.
The statement which is true about stars that produce similar spectral patterns is true that the stars have about the same size. Thus, the most valid option for this question is B.
What is meant by spectral patterns?Spectral patterns may be defined as a type of arrangement that can be utilized in order to identify the atoms, elements, or molecules present in a star, galaxy, or cloud of interstellar gas.
If we disintegrate the incoming rays of light from a celestial source with the help of a prism, we will very frequently observe a spectrum of colors that are passed with discrete lines. Stars of identical size, temperature, composition, appearance, and other attributes have similar spectra and are categorized into an identical and similar spectral classes.
Therefore, the statement which is true about stars that produce similar spectral patterns is true that the stars have about the same size. Thus, the most valid option for this question is B.
To learn more about the Spectra of stars, refer to the link:
https://brainly.com/question/14819167
#SPJ9
Three objects having the same mass begin at the same height, and all move down the same vertical distance H. One falls straight down, one slides down a frictionless inclined plane, and one swings on the end of of a string. In which case does the object have the biggest total work done on it by all forces during its motion? Free Fall Incline String Same
The object has the greatest total work done on it by all the forces during its motion, when it is in Free Fall. The correct answer A.
The object that has the biggest total work done on it by all forces during its motion is the one that falls straight down, as it experiences the force of gravity over its entire path.
The object that slides down the frictionless inclined plane experiences the force of gravity over only part of its path, while the object that swings on the end of a string only experiences the force of gravity for a very short period of time.
Learn more about Free fall of an object:
https://brainly.com/question/355140
#SPJ4
In which lists are major steps of solar system formation in the correct order? a. gravitational collapse of the solar nebula, accretion, condensation b. gravitational collapse of solar nebula, condensation, accretion c. accretion, condensation, gravitational collapse of solar nebula
Collapse, Condensation, Accretion lists are major steps of solar system formation in the correct order
What is the correct order in which our solar system evolved?The Sun and the planets formed together 4.6 billion years ago from a cloud of gas and dust known as the solar nebula. A shock wave from a neighboring supernova explosion most likely caused the solar nebula to collapse. The Sun formed in the center, and the planets formed in a thin disk around it.
Planets, including those in our solar system, are thought to form from dust the size of a human hair, according to scientists. They arise from the enormous ring of gas and dust that surrounds young stars. Gravity and other factors induce material within the disk to collide.
Learn more about solar system
https://brainly.com/question/1286910
#SPJ4