Answer:
Steel
Explanation:
Steel is a metal that magnets stick to because iron can be found inside steel
Answer:Magnets stick to any metal that contains iron, cobalt or nickel.
Explanation:Iron is found in steel, so steel attracts a magnet and sticks to it. Stainless steel, however, does not attract a magnet.
A 2.35-kg rock is released from rest at a height of 21.4 m. Ignore air resistance and determine (a) the kinetic energy at 21.4 m, (b) the gravitational potential energy at 21.4 m, (c) the total mechanical energy at 21.4 m, (d) the kinetic energy at 0 m, (e) the gravitational potential energy at 0 m, and (f) the total mechanical energy at 0 m.
Explanation:
Given that,
The mass of rock, m = 2.35-kg
It was released from rest at a height of 21.4 m.
(a) The kinetic energy is given by : [tex]E_k=\dfrac{1}{2}mv^2[/tex]
As the rock was at rest initially, it means, its kinetic energy is equal to 0.
(b) The gravitational potential energy is given by : [tex]E_p=mgh[/tex]
It can be calculated as :
[tex]E_p=2.35\times 9.8\times 21.4\\\\E_p=492.84\ J[/tex]
(c) The mechanical energy is equal to the sum of kinetic and potential energy such that,
M = 0 J + 492.84 J
M = 492.84 J
Hence, this is the required solution.
Energy is transferred through a solid
by if there is a
between the ends of it.
Liquids and solids transfer energy
by because the particles can
Energy is transferred much
through an insulator
than it is through a conductor.
Tore
Answer:
Conduction is the transfer of thermal energy through direct contact between particles of a substance, without moving the particles to a new location. Usually occurs in solids. When heat is supplied to one end, molecules at that end start to move more quickly.
Explanation:
Conduction is the transfer of heat and electricity through a material or surface. Generally, metals are good conductors of heat and electricity.
What is Conduction?Conduction is the process through which heat energy is transmitted through the collisions which occur between neighboring atoms or molecules in a system. Conduction occurs more readily in the solids and liquid substances, where the particles are closer together than that of the gases, where the particles are further apart from each other.
Metals are good conductors of heat and electricity as they contain valence electrons and charge whereas non-metals are bad or poor conductors of heat and electricity as these elements does not contain valence electrons.
Learn more about Conduction here:
https://brainly.com/question/12136944
#SPJ2
What is the potential energy, if a
body of mass 250 kg is at a height of 30
metre?
Rhodium is in period 5 of the periodic table. What does this tell you about this element
(It’s number 4 in the picture)
Rhodium (Rh) is in period 5 on the periodic table. What does this tell you about this element ?
option - D
It has 5 energy levels/shells in its electron cloud.
With the information from the periodic table we can find that the correct statement is:
D. it is 5 energy level
The periodic table of the elements is a method of classifying the chemical elements based on their atomic number, it is divided into rows and columns
The rows are called the period and indicate the energy shell that is filled with electrons, all periods start with one electron and end when the shell is filled with 8 electrons.
The columns called groups correspond to elements that have the same number of electrons in their last shell, the chemical properties of the elements of the group are similar.
In this case we have an element the Rhodium, from period 5 and group VIIIB, when reviewing the period table it can be indicated that it has properties similar to cobalt and the inner layer is filled with two electors in its last layer.
When reviewing the different claims
a) False. The periodic table is not about molecules but about atoms
b) False. The metallic characteristics depend on the relationship between the number of electrons and the fermi level that is not indicated in the periodic table.
c) False. The number of protons is equal to the atomic number, in this case the rhodium has Z = 45, therefore it has 45 protons in the nucleus
d) True. It is at level 5 since the energy levels and the periods coincide.
In conclusion, with the information from the periodic table, we can find that the correct statement is:
D. it is 5 energy level
learn more about the periodic table here:
https://brainly.com/question/13372254
The current supplied to an air conditioner unit is 4.00 amps. The air conditioner is wired using a 10-gauge (diameter 2.588 mm) wire. The charge density is n=8.48×1028electronsm3n=8.48×1028electronsm3 . Find the magnitude of (a) current density and (b) the drift velocity.
Answer:
a. 7.6 * 10^5 A/m^2
b. 5.6 * 10-^5 m/s
Explanation:
lol
a
The
is a point that lies along a vertical line drawn from the suspension point of an object when the object is at
a standstill.
centripetal force
b. center of mass
c. equilibrium
d. center point
The average mean distance of Saturn from the sun is
Answer:
From an average distance of 886 million miles (1.4 billion kilometers), Saturn is 9.5 astronomical units away from the Sun. One astronomical unit (abbreviated as AU), is the distance from the Sun to Earth. From this distance, it takes sunlight 80 minutes to travel from the Sun to Saturn.
we have that from the Question"The average mean distance of Saturn from the sun is" it can be said that Tthe average mean distance of Saturn from the sun is
A distance of 1427 x 10^6 km or 886 696 691 milesFrom the Question we are told
The average mean distance of Saturn from the sun is
Generally
The Sun is the star of the milky way galaxy and its distance from every planet in the milky way determines in one way or another its properties and in-habitability
Saturn being a Planet of the milky way we see that Saturn is a significant distance away from sun
A distance of 1427 x 10^6 km or 886 696 691 miles
Therefore
The average mean distance of Saturn from the sun is
A distance of 1427 x 10^6 km or 886 696 691 miles
For more information on this visit
https://brainly.com/question/19007362?referrer=searchResults
(a) What do you mean by rest?
A small dog is trained to jump straight up a distance of 1.1 m. How much kinetic energy does the 7.7 kg dog need to jump this high?
Answer:
83.09 J
Explanation:
The potential energy at the point of the top of the jump is represented by the equation
[tex]mgdeltah[/tex]
when the dog jumps, all the potential energy converts to kinetic energy (1/2mv^2). Plugging in the values:
(7.7)(4.184)(1.1) = 83.0907 J
Can two waves have the
same wavelength but different amplitudes?
Explain
Answer:
I think Yes because they could have different amounts of energy.
Explanation:
23
In order for a 12 Volt power source
to produce a current of 0.085 amps,
a resistance of...
[?] Ohms is needed.
Enter
Haven't learned this yet.
Answer:
141.18 ohms
Explanation:
From the question given above, the following data were obtained:
Voltage (V) = 12
Current (I) = 0.085 A
Resistance (R) =?
The resistance needed can be obtained as follow:
V = IR
12 = 0.085 × R
Divide both side by 0.085
R = 12 / 0.085
R = 141.18 ohms
Therefore, a resistor of resistance 141.18 ohms is needed.
Time of the day when the Sun does not shine (___time)
N____N
Rhodium is in period 5 of the periodic table. What does this tell you about this element
Answer:
. It is an extraordinarily rare, silvery-white, hard, corrosion-resistant, and chemically inert transition metal. It is a noble metal and a member of the platinum group.
Explanation:
On a 10 kg cart (shown below), the cart is brought up to speed with 50N of force for 7m, horizontally. At this point (A), the cart begins to experience an average frictional force of 15N throughout the ride.
Find:
a) The total energy at (A)
b) The velocity at (B)
c) The velocity at (C)
d) Can the cart make it to Point (D)? Why or why not?
What is diffraction of light
Answer:
According to "http://ww2010.atmos.uiuc.edu" Diffraction is the slight bending of light as it passes around the edge of an object.
Some examples of Light Defraction would be..
-CD reflecting rainbow colours
-Sun appears red during sunset
-From the shadow of an object
help me pls
An object accelerates if it:
a.) changes the direction of its velocity but not the magnitude
b.)changes the magnitude of the velocity but not the direction
c.)changes its speed
d.) all of the above
e.) none of the above
Answer:
D
Explanation:
A 10.0-g bullet is fired into, and embeds itself in, a 1.95-kg block attached to a spring with a force constant of 23.9 N/m and whose mass is negligible. How far is the spring compressed if the bullet has a speed of 300 m/s just before it strikes the block and the block slides on a frictionless surface
Answer: 0.43 m
Explanation:
Given
mass of bullet [tex]m=10\ gm\approx 0.01\ kg[/tex]
mass of block [tex]M=1.95\ kg[/tex]
The Force constant of spring is [tex]k=23.9\ N/m[/tex]
Speed of bullet is [tex]u=300\ m/s[/tex]
Conserving the energy i.e. kinetic energy of the bullet and box is converted into Elastic potential energy of spring
[tex]\Rightarrow \dfrac{1}{2}(M+m)v^2=\dfrac{1}{2}kx^2[/tex]
Conserving linear momentum
[tex]\Rightarrow mu=(M+m)v\\\\\Rightarrow v=\dfrac{mu}{M+m}[/tex]
Put the value of [tex]v[/tex] we get
[tex]\Rightarrow x=mu\sqrt{\dfrac{1}{k(M+m)}}\\\Rightarrow x=0.01\times 300\sqrt{\dfrac{1}{23.9(0.01+1.95)}}\\\Rightarrow x=3\sqrt{\dfrac{1}{46.844}}=\dfrac{3}{6.844}=0.43\ m[/tex]
Thus, spring will be compressed to a distance of [tex]0.43\ m[/tex]
A snail traveled 3.12 meters in 27.13 minutes. What is the snails speed in meters per second
Answer:
0.002 m/s
Explanation:
27.13(60) = 1,627.8 seconds
3.12/1,627.8 = 0.00191 ≈ 0.002 = s
Are you sure you're not looking for cm/s?
define prism and itz colo
Answer:
prism was just a pyramid and if you strike it with white light, the white light then breaks down into 7 colors. (red,orange,yellow,green,blue,indigo,violet)
____ is a chemical messenger released by virus infected cells
Answer:
Cytokines is the answer
Explanation:
it is another word for the chemical messanger
The rods, which number over 100 million, can only be activated by a certain range of wavelengths, but they do not pass any color information to the brain. In other words, they note differences in shades of grey (from black to white) and are responsible for a person's ability to see in dim light. Cones, which number around 6 million, give us color vision. Cones come in three different kinds: 64%% of cones are sensitive to long wavelengths of visible light (toward the red end of the spectrum), 32%% are sensitive to medium wavelengths, and the remaining 2%% are sensitive to short wavelengths (toward the blue end of the spectrum). Colors are differentiated on the basis of the extent to which visible light stimulates each kind of cone.
Do rods have their peak sensitivity at a higher or lower frequency than cones?
a) Higher
b) Lower
Answer:
The correct answer is a
peak sensitivity is much higher for cones
Explanation:
After reading this interesting problem, where it gives a good description of the types of photoreceptor cells that exist in the eyes
The Cone has its name because of the shape of a cone that has this shape that allows to perceive very small amounts of intensity
The Canes have the shape of a cane and are filled with a substance that is sensitive to color colors, but they need a greater intensity of light to be activated, for which reason they work in the daytime, when it gets dark the intensity of the light is insufficient to activate these cells and the only ones that send information to the brains are the cones.
With this explanation it is clear that cones have high sensitivity at all frequencies and rods have low to medium sensitivity at specific frequencies.
Therefore peak sensitivity is much higher for cones
The correct answer is a
A positive charge Q2 is uniformly distributed over a nonconducting disc of radius a which has a concentric circular hole of radius b. At the center of the hole there is another nonconducting disc of radius d where a charge Q1 is uniformly distributed.
a) Find the surface charge density of the disc with the hole σ2.
b) Find the surface charge density 01 of the disc of radius d.
c) Find the total charge enclosed by the circle of radius
Answer:
a) σ = [tex]\frac{Q_1}{ a^2 - b^2}[/tex] , b) σ = [tex]\frac{Q_2}{d^2}[/tex] , c) Q_ {total} = Q₁ + Q₂, σ_ {net} = [tex]\frac{Q_1 + Q_2}{\pi \ a^2}[/tex]
Explanation:
a) The very useful concept of charge density is defined by
σ = Q / A
In this case we have a circular disk
The are of a circle is
A = π r²
in this case we have a hole in the center of radius r = b, so
A_net = π r² - π r_ {hollow} ²
A_ {net} = π (a² - b²)
whereby the density is
σ = [tex]\frac{Q_1}{ a^2 - b^2}[/tex]
b) The density of the other disk is
σ = Q₂ / A₂
σ = [tex]\frac{Q_2}{d^2}[/tex]
c) The total waxed load is requested by the larger circle
Q_ {total} = Q₁ + Q₂
the net charge density, in the whole system is
σ = [tex]\frac{Q_{total} }{ A_{total} }[/tex]
the area is
A_{total} = π a²
since the other circle is inside, we are ignoring the space between the two circles
σ_ {net} = [tex]\frac{Q_1 + Q_2}{\pi \ a^2}[/tex]
2. A uniform wire of resistance R is stretched until its length doubles. Assuming its density and resistivity remain constant, what is its new resistance
Answer:
Resistance is quadrupled.
Explanation:
Solving this requires us to use the formula of resistivity.
Resistivity is usually said to be the measure of the resistance of a particular size of any given material to the electrical conduction. It is mathematically represented as
ρ = RA/L, where
ρ = the resistivity of the given material
R = the resistance of the material
A = the area of the material
L = length of the material.
From the question, we're told that the length is doubled with the resistivity and density remaining constant. If the density is constant, this makes the volume constant as well.
Volume, V = A * L. We're then told that the length is doubled. If the length is doubled, for the volume to remain constant, then the area must be halved.
Volume, V = A/2 * 2L
Making, Resistance R, subject of the formula, we have
R = ρL/A.
Since resistivity is constant and the area is halved, we then have
R = 2L / (1/2A)
R = 4L / A
If the length is doubled, we have the resistance to be quadrupled
A planet of mass M has a moon of mass m in a circular orbit of radius R. An object is placed between the planet and the moon on the line joining the center of the planet to the center of the moon so that the net gravitational force on the object is zero. How far is the object placed from the center of the planet
Answer:
r =[tex]\frac{ 1 \pm \sqrt{ \frac{m}{M} } }{1 - \frac{m}{M} }[/tex]
Explanation:
Let's apply the universal gravitation law to the body (c), we use the indications 1 for the planet and 2 for the moon
∑ F = 0
-F_{1c} + F_{2c} = 0
F_{1c} = F_{2c}
let's write the force equations
[tex]G \frac{m_c M}{r^2} = G \frac{m_c m}{(d-r)^2}[/tex]
where d is the distance between the planet and the moon.
[tex]\frac{M}{r^2} = \frac{m}{(d-r)^2}[/tex]
(d-r)² = [tex]\frac{m}{M} \ \ r^2[/tex]
d² - 2rd + r² = \frac{m}{M} \ \ r^2
d² - 2rd + r² (1 - [tex]\frac{m}{M}[/tex]) = 0
(1 - [tex]\frac{m}{M}[/tex]) r² - 2d r + d² = 0
we solve the second degree equation
r = [2d ± [tex]\sqrt{ 4d^2 - 4 ( 1 - \frac{m}{M} ) }[/tex] ] / 2 (1- [tex]\frac{m}{M}[/tex])
r = [2d ± 2d [tex]\sqrt{ \frac{m}{M} }[/tex]] / 2d (1- [tex]\frac{m}{M}[/tex])
r =[tex]\frac{ 1 \pm \sqrt{ \frac{m}{M} } }{1 - \frac{m}{M} }[/tex]
there are two points for which the gravitational force is zero
The distance between object from planet will be "[tex]\frac{R}{[1+\sqrt{\frac{m}{M} } ]}[/tex]".
According to the question,
Let,
Object is "x" m from planet center = R - xGravitational force = 0Mass of object = m₁As we know,
→ [tex]Prerequisites-Gravitational \ force = \frac{GMm}{r^2}[/tex]
Now,
→ [tex]\frac{GMm_1}{x^2} = \frac{Gmm_1}{(R-x)^2}[/tex]
→ [tex]\frac{(R-x)^2}{x^2} = \frac{m}{M}[/tex]
→ [tex]\frac{R-x}{x} =\sqrt{\frac{m}{M} }[/tex]
→ [tex]x = \frac{R}{[1+ \sqrt{\frac{m}{M} } ]}[/tex]
Thus the answer above is appropriate.
Learn more:
https://brainly.com/question/11968775
g 1. To see why an MRI utilizes iron to increase the magnetic field created by a coil, calculate the current needed in a 400-loop-per-meter circular coil 0.660 m in radius to create a 1.20-T field (typical of an MRI instrument) at its center with no iron present. The magnetic field of a proton is approximately like that of a circular current loop in radius carrying . What is the field at the
Answer:
I = 2387.32 A
Explanation:
Given that,
Number of turns in the loop, N = 400
The radius of the circular coil, r = 0.66 m
The magnetic field inside the MRI, B = 1.2 T
We need to find the current in the loop. The magnetic field inside the solenoid is given by :
[tex]B=\mu_o NI\\\\I=\dfrac{B}{\mu_o N}\\\\I=\dfrac{1.2}{4\pi \times 10^{-7}\times 400}\\\\I=2387.32\ A[/tex]
So, the required current is equal to 2387.32 A.
Define the term pressure
Answer:
Pressure is the perpendicular force applied per unit area.
What would happen if the molecules in a sample moving entirely ?
Answer:
Molecular scale. The story begins a long time ago
when the idea that molecules are in constant motion
was first discovered. Part of the evidence that you can
see in everyday life was discovered by Robert Brown
about 150 years ago when he used a microscope to
watch how tiny dust particles move.
So how fast do molecules move? It all depends upon
the molecule and its state: molecules in a solid state
move slower than in a liquid state, and much slower
than gas molecules. One estimate puts gas molecules
in the range of 1,100 mph at room temperature. Cool
them down to almost absolute zero and they slow
down to less than 0.1 mph (slower than the average
couch potato). The fact that they are always moving
makes it a challenge to see molecules and make stuff
out of them, but it’s a challenge that scientists
work hard to figure out.
Explanation:
1. Alexandra and Rachel are on a train that sounds a whistle at a constant frequency as
it leaves the train station. Compared to the sound emitted by the whistle, the sound that
the passengers standing on the platform hear has a frequency that is
a. lower, because the sound-wave fronts reach the platform at a frequency
lower than the frequency at which they are produced
b. lower, because the sound waves travel more slowly in the still air above the
platform than in the rushing air near the train
c. higher, because the sound-wave fronts reach the platform at a frequency
higher than the frequency at which they are produced
d. higher, because the sound waves travel faster in the still air above the
platform than in the rushing air near the train
Answer: the answer would be C trust me i took the test if its not that its b
hope that helps
Explanation: i took the test
answer:
a) lower because the sound-wave fronts reach the platform at a frequency lower than the frequency at which they are produced
explanation :3
If the train is leaving the train station, then the people who are standing on the platform would hear a sound with a lower frequency since the train is moving further away. ^^
Two tugboats pull a disabled supertanker. Each tug exerts a constant force of 1.80×106 N , one at an angle 14.0 ∘ west of north, and the other at an angle 14.0 ∘ east of north, as they pull the tanker a distance 0.800 km toward the north. Part A What is the total work done by the two tugboats on the supertanker?
Answer:
W = 1,049 10⁹ J
Explanation:
Work is defined by the relation
W = F. d = F d cos θ
where tea is the angle between the forces and the displacement.
The total work is the sum of the work of each tug.
Tug 1
W₁ = F d cos θ₁
the angle measured from the positive side of the x-axis is
θ₁ = 14 + 90 = 104º
tugboat 2
W₂ = F d cos θ₂
θ₂ = 14
we substitute
W = F d cos θ₁ + F d cos θ₂
W = F d (cos θ₁ + cos θ₂)
let's calculate
W = 1.80 10⁶ 800 (cos 104 + cos 14)
W = 1,049 10⁹ J
what dose nuclear reactions produce?
Answer:
a new chromebook for you and you will get to know the other one that