which area on the illustration represents the largest reservoir of nitrogen on earth? 7 3 1 4

The balanced chemical equation for precipitation of [tex]BaSO4[/tex] is:

[tex]Ba2+ (aq) + SO42- (aq) → BaSO4 (s)[/tex]. The concentration of Ba2+ remaining in solution is 7.3 × 10^-9 M.

a) To begin precipitation of BaSO4, the ion product of Ba2+ and SO42- must reach the solubility product constant, Ksp, for BaSO4. The Ksp for BaSO4 is[tex]1.1 * 10^{-10}[/tex]. [tex]Ksp = [Ba2+][SO42-][/tex] , [tex]1.1 * 10^{-10} = (0.010 M)(x M)[/tex],[tex]x = 1.1 * 10^{-8} M[/tex]. Therefore, concentration of sulfate ion required to begin precipitation of BaSO4 is [tex]1.1 * 10^{-8} M[/tex].  

b) Once  concentration of SO42- in solution reaches 0.015 M, the ion product of Ba2+ and SO42- will exceed the Ksp for BaSO4, and precipitation will occur until equilibrium is established. [tex][Ba2+][SO42-][/tex] = (0.010 M)(1.1 × 10^-8 M) = 1.1 × 10^-10.

Let x be the concentration of Ba2+ that remains in solution after precipitation: [tex]Ksp = [Ba2+][SO42-][/tex] ,[tex]1.1 * 10^{-10} = (x M)(0.015 M),[/tex] [tex]x = 7.3 * 10^{-9 }M.[/tex]

To know more about precipitation, here

brainly.com/question/18109776

#SPJ4

The salts given, when classified as acidic, basic, or neutral, gives:

NH4ClO4 dissociates to form NH4+ and ClO4-, which reacts with water to form H3O+ and ClO4-. The presence of H3O+ ions makes the solution acidic. K2CO3 dissociates to form 2K+ and CO32-, which reacts with water to form HCO3- and OH-. The presence of OH- ions makes the solution basic.

NaCN dissociates to form Na+ and CN-, which reacts with water to form HCN and OH-. The presence of OH- ions makes the solution basic. KCl dissociates to form K+ and Cl-, neither of which reacts with water. Therefore, the solution is neutral.

LiClO4 dissociates to form Li+ and ClO4-, which reacts with water to form HClO4 and OH-. The presence of H3O+ ions makes the solution acidic.

Find out more on acidic salts at https://brainly.com/question/30935790

#SPJ1

True. The permissible range for an objective function coefficient represents the degree of uncertainty for the coefficient of interest and is based on the assumption that the initial estimations for all other coefficients in the linear programming model are correct..

The permissible range for an objective function coefficient is predicated on the assumption that all other coefficients in the linear programming model were initially estimated with the highest degree of accuracy. The objective function coefficient, whose true value may vary from its initial estimate, is the sole variable to which the permitted range is thus limited. This is so because linear programming models rely on a number of premises, one of which being that the model's coefficients are known for sure. The acceptable range denotes the range of values that the objective function coefficient can have without undermining the model's underlying assumptions in practise, where these coefficients may be derived using historical data or other sources.

learn more about coefficient here:

https://brainly.com/question/30066987

#SPJ4

The chemical formula for lead chromate is PbCrO4, which means that for each formula unit of lead chromate, there are one lead atom, one chromium atom, and four oxygen atoms. Thus, there are a total of one lead atom in each formula unit of lead chromate.

Explanation: The chemical formula for lead chromate is PbCrO4. The number of lead atoms present in each formula unit of lead chromate can be determined by analyzing the subscripts in the formula.The subscript of Pb in the formula is 1. This means that each formula unit of lead chromate contains 1 lead atom.Therefore, the number of lead atoms in each formula unit of lead chromate is 1.Lead chromate is a yellow pigment that has been used in many industrial applications. It is often used as a pigment in paints, plastics, and ceramics. It is also used in the production of varnishes, dyes, and pigments.The substance is toxic and carcinogenic. It can cause cancer and other serious health problems if inhaled or ingested. For this reason, the use of lead chromate has been restricted in many countries, and its use is closely monitored in others.Lead chromate is a compound made up of lead, chromium, and oxygen. It is produced by reacting lead nitrate with potassium chromate in the presence of an alkaline solution. The reaction produces lead chromate and potassium nitrate.

for more such questions on lead chromate

https://brainly.com/question/22437716

#SPJ11

When flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as gluten. It is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.

Gluten is a mixture of two proteins, gliadin and glutenin, which gives wheat dough its elastic and viscoelastic properties. When flour is mixed with water, the gluten forms an elastic network that can expand with the inner pressure of gases (air, steam, and CO2). This allows bread to rise with the action of yeast, making it light and fluffy. Gluten is also responsible for the chewy texture of bread and other baked goods that use wheat flour.

Gluten is found in wheat, barley, and rye. People with celiac disease or gluten intolerance are unable to digest gluten, and consuming it can cause a range of symptoms, including diarrhea, bloating, and abdominal pain. As a result, they must follow a gluten-free diet. Gluten-free flours made from rice, corn, and other grains can be used as a substitute for wheat flour in many recipes.

Learn more about celiac disease here: https://brainly.com/question/16779711

#SPJ11

The equilibrium constant at 1000K for the reaction CaCO3(s) + C(s) --> CaO(s) + 2CO(g) is K = K1.K2 = 0,039 . 1,9 = 0,074.

The equilibrium constant at 1000 K for the given chemical reaction, CaCO3(s) + C(s) CaO(s) + 2 CO(g), can be determined as follows:

[tex]K1 = 0,039\\K2 = 1,9[/tex]

We know that the equilibrium constant of a reaction is the product of the equilibrium constants of its individual steps (if the reaction is made up of more than one step) under the given conditions. Therefore, we can use the following equations to calculate the equilibrium constant of the given reaction: [tex]Kc = \frac{K1. K2}{Keq}[/tex] (where Keq is the equilibrium constant of the desired reaction) [tex]Kc = [(P(CO))^2/(P(CaCO3).P(C))] . 0,039 . 1,9[/tex].

Now, we have to express the pressure of all the species involved in terms of the equilibrium constant of the reaction we need to find. For this, we use the following relation:

Keq = [tex](P(CaO).P(CO)^2)/(P(CaCO3).P(C))[/tex]. On substituting the above expression for Keq in the expression for Kc, we get:

Kc = [tex][(P(CO))^2/(P(CaCO3).P(C))] . 0,039 . 1,9[/tex]

Keq = [tex](P(CaO).P(CO)^2)/(P(CaCO3).P(C))[/tex]

On comparing the expressions for Kc and Keq, we get:

[tex]Kc = K1 . K2/Keq\\Kc = [(P(CO))^2/(P(CaCO3).P(C))] . 0.039 . 1.9\\Kc = (P(CaO).P(CO)^2)/(P(CaCO3).P(C))[/tex]

Therefore, we can write: [tex](P(CaO).P(CO)^2)/(P(CaCO3).P(C))[/tex]

Kc =[tex][(P(CO))^2/(P(CaCO3).P(C))] . 0,039 . 1,9(P(CaO).P(CO)^2)/(P(CaCO3))^2[/tex]

[tex]Kc = 0,039. 1,9P(CO)^2/P(CaCO3) \\Kc = 0,074251/P(CaO) \\Kc = (P(CaCO3).P(C) )/P(CO)^2.[/tex]

Now, using the expression for Keq, we can write:

[tex]Keq = (P(CaO).P(CO)^2)/(P(CaCO3).P(C))\\Keq = (P(CaCO3).P(C).P(CO)^2)/(P(CaCO3).P(C))\\Keq = P(CO)^2/P(C)\\Keq = 0.07425[/tex]

Learn more about equilibrium constant: brainly.com/question/3159758

#SPJ11

The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol. This enthalpy change is referred to as the heat of reaction, or enthalpy of reaction, and can be calculated using the enthalpy of formation of each reactant and product in the reaction.

The enthalpy of formation for carbon is given as +716 kJ/mol and for oxygen it is given as 0 kJ/mol. The enthalpy of formation for CO2 is given as -393.5 kJ/mol. Using Hess’s law, we can calculate the enthalpy of reaction using the following equation:  ΔHreaction = (ΔHformation CO2) - (ΔHformation C + ΔHformation O2)

Using the values for the enthalpies of formation for the reactants and products, the enthalpy of reaction can be calculated as follows: ΔHreaction = (-393.5) - (716 + 0) = -349 kJ/mol.This is the same enthalpy change as given in the question.

In conclusion, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) + O2 (g) --> CO2 (g) is -349 kJ/mol.

Know more about  enthalpy change here:

https://brainly.com/question/29556033

#SPJ11

The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].

Learn more about electron geometry: https://brainly.com/question/7283835

#SPJ11

The factors which influence the effectiveness of antimicrobial chemicals are: numbers and kinds of microbes present, concentration of the chemical, presence of organic matter, and temperature.

Factors that influence the effectiveness of antimicrobial chemicals are:

Numbers and kinds of microbes present: The type of microbe present can affect the effectiveness of the chemical used to eradicate it. For instance, Gram-negative bacteria is resistant to certain disinfectants.

Concentration of the chemical: The concentration of the chemical used is a significant factor affecting its effectiveness. An appropriate concentration is required for the chemical to kill the targeted microorganisms.

Presence of organic matter: Organic matter such as blood, soil, or feces can reduce the effectiveness of antimicrobial chemicals because they absorb or react with the disinfectant.

Temperature: The temperature at which the disinfectant is used may impact its efficacy. Certain chemicals work better at specific temperatures, and heat improves their efficacy by increasing the chemical reaction's rate.

Learn more about Antimicrobial chemicals here:

https://brainly.com/question/9227526

#SPJ11

The element x is chromium which  forms a crystal with a body centered cubic unit cell.

A central atom is surrounded by eight atoms at each of the eight corners in the BCC structure. Along the cube diagonals, the atoms in the center and corners make contact. Each BCC unit cell contains two atoms: one complete atom in the center and one shared by eight unit cells in each corner.

use formula

d= [tex]\frac{M*Z}{V*N}[/tex]

D = Density

M =  molecular mass

Z = 2

N = Avogadro number

to know more about unit cell , visit ;

brainly.com/question/29537966

#SPJ1

The approximate percent by mass of oxygen in SO3 is 19.98 % which is calculated by using the percent composition formula.

The sulfur trioxide is defined as the chemical compound with molecular formula or chemical formula SO3. In every sample of substance there will be the same number of sulfur atoms and oxygen atoms present in the substance.

The percent composition can be calculated by dividing the mass of the atom by the total mass of the compound or the molecular weight multiplied by 100.

It can be calculated as, C% =MA / MT×100

We know that the atomic weight of Sulphur is 32.059 g/mole and the atomic weight of oxygen is 16.0.

The total mass becomes,  32.059 + 3×16=80.059

.C% = 16.00 / 80.059 ×100

⇒C% =19.98 %

To learn more about percent composition

https://brainly.com/question/28357357

#SPJ4

The correct question is,

What is the approximate percent by mass of oxygen in SO3?

To find the volume of gaseous products formed in the given reaction, we have to balance the chemical equation and then use the balanced chemical equation to solve the question.

The balanced chemical equation of the given reaction is as follows:

CO (g) + H2O (l) → CO2 (g) + H2 (g)

Now, we need to determine the mole ratios of reactants and products:

1 mole of CO reacts with 1 mole of H2O to produce 1 mole of CO2 and 1 mole of H2.

As given, we have 119 liters of CO, we need to calculate the amount of H2O required to react with 119 liters of CO:

1 mole of CO occupies 22.4 L at STP.

Therefore, 119 L of CO contains 119/22.4 = 5.31 moles of CO.

From the balanced chemical equation, we can see that 1 mole of CO reacts with 1 mole of H2O.

Therefore, 5.31 moles of CO will react with 5.31 moles of H2O.

So, the volume of H2O required to react with 119 L of CO can be calculated as follows:

5.31 moles of H2O occupy 5.31 × 18 L = 95.58 L

Now, we have the volume of H2O required to react with 119 L of CO.

We know that, at the same temperature and pressure, the volume of the gaseous product is directly proportional to the number of moles of the gaseous product.

So, the volume of gaseous products formed in the given reaction can be calculated as follows:

1 mole of CO2 occupies 22.4 L at STP.

Therefore, 5.31 moles of CO2 will occupy 5.31 × 22.4 L = 119.2 L

1 mole of H2 occupies 22.4 L at STP.

Therefore, 5.31 moles of H2 will occupy 5.31 × 22.4 L = 119.2 L

Therefore, the total volume of gaseous products formed in the given reaction is 119.2 L. Answer: 119.2

to know more about chemical balance refer here:

https://brainly.com/question/28294176#

#SPJ11

The bond order of the carbon-carbon bond in ethylene (C₂H₄) increases when an additional electron is added to the molecule to form the C2H4 ion. This is because the extra electron is shared between the two carbon atoms, forming a triple bond, which increases the bond order from 2 to 3.

What is the effect on bond order?

When ethylene gains an additional electron to give the C₂H₄ ion, the bond order of the carbon-carbon bond will decrease. Alkene compounds are characterized by a double bond between two carbon atoms in their structure. The bond order of ethylene.

Ethylene's carbon-carbon bond is a double bond that includes a sigma bond and a pi bond. Sigma bonds are formed when two orbitals overlap, and pi bonds are formed when two p orbitals overlap.

The bond order of ethylene's carbon-carbon bond is two because it is a double bond. Bond order is defined as the number of bonding electron pairs shared between two atoms. The higher the bond order, the stronger the bond.

If an additional electron is added to ethylene, the bond order of the carbon-carbon bond will decrease because the additional electron will increase the repulsion between the carbon atoms, resulting in a weaker bond. Therefore, when the ethylene molecule gains an additional electron to give the C₂H₄ ion, the bond order of the carbon-carbon bond decreases.

Read more about ethane here:

https://brainly.com/question/1309871

#SPJ11

The electrons donated to the electron transport chain by NADH activate 4 proton pumps, while those donated by FADH2 activate 2 proton pumps. Electron transport is the process by which electrons are passed from one molecule, such as NADH or FADH2, to another molecule, such as oxygen.

The electrons donated to the electron transport chain by NADH activate 10 proton pumps, while those donated by FADH2 activate 6 proton pumps.

What is the electron transport chain?

The electron transport chain (ETC) is a chain of molecules that move electrons down a gradient from a higher energy state to a lower energy state, releasing energy along the way. In eukaryotic cells, the electron transport chain is located in the inner mitochondrial membrane. Electrons from NADH and FADH2 are passed down the chain in the electron transport chain, which eventually generates a proton gradient used to create ATP. In the electron transport chain, NADH and FADH2 donate electrons to a chain of electron carriers, which then pump protons from the mitochondrial matrix to the intermembrane space. The number of proton pumps activated by electrons donated by NADH and FADH2 differ. Electrons donated by NADH activate ten proton pumps, while electrons donated by FADH2 activate six proton pumps. The electron transport chain is responsible for the generation of the proton motive force used by ATP synthase to create ATP, which is the main source of energy for the cell.

To know more about electron transport chain, click the below link:

https://brainly.com/question/24372542

#SPJ11

The part of an amino acid that varies in size and structure, giving it unique properties is the side chain or R-group.

The part of an amino acid that varies in size and structure, giving it unique properties is the side chain or R-group. Amino acids are the building blocks of proteins. They are made up of a central carbon atom, an amino group (NH2), a carboxyl group (COOH), and a side chain or R-group.

The R-group can be different for each of the 20 amino acids, giving them their unique properties.The R-group can vary in size and structure, and it can be either acidic, basic, polar, or nonpolar. The properties of the R-group will determine the overall properties of the amino acid and the protein it is a part of.For example, glycine has a small R-group that is just a hydrogen atom, making it the smallest amino acid. The R-group of tryptophan is large and contains both polar and nonpolar regions, making it useful in anchoring proteins to cell membranes. Lysine has a basic R-group that is positively charged at physiological pH, allowing it to interact with negatively charged molecules in the body.

These are just a few examples of how the R-group can give each amino acid unique properties.

for such more question amino acid

https://brainly.com/question/14351754

#SPJ11

The balanced chemical equation for the decomposition of solid Mercury (II) oxide (HgO) into liquid Mercury and gaseous Dioxygen is:

[tex]HgO (s) \rightarrow Hg (l) + O_2 (g)[/tex]

Mercury (II) oxide, HgO, is a stable compound that may be decomposed by heating it to generate mercury metal and oxygen gas.

This reaction may be classified as a thermic decomposition reaction because it is initiated by heat. The equation is balanced as there is one atom of mercury on the left-hand side and one on the right-hand side.

Similarly, there are two atoms of oxygen on the left-hand side and two on the right-hand side. The physical state of HgO is solid, whereas the physical state of Hg and [tex]O_2[/tex] is liquid and gaseous, respectively.

To learn more about balanced chemical equation refer - https://brainly.com/question/14228953

#SPJ11

Answer: B (The Rf value would decrease)

Explanation:

The Rf (retention factor) value is a ratio of the distance traveled by the compound to the distance traveled by the solvent front in thin-layer chromatography (TLC). The polarity of the solvent affects the Rf value of a compound.

In general, if a more polar solvent is used in TLC, the Rf value of a compound will decrease, and if a less polar solvent is used, the Rf value will increase.

In this case, using 40% ethyl acetate in hexanes means using a more polar solvent compared to a pure hexanes solvent. As eugenol is a moderately polar compound, the increased polarity of the solvent will likely result in a decrease in the Rf value.

Therefore, the correct answer is b. The Rf value would decrease.

The correct matching is

a substance that donates one proton when dissolved in water -  e. monoprotic acid

a substance that donates two protons when dissolved in water -  b. diprotic acid

a substance that donates three protons when dissolved in water - d. triprotic acid

any ionic compound whose cation comes from a base and whose anion comes from an acid -  c. salt

the solution in the buret -  f. titrant

the solution in the flask - a. analyte

The term "monoprotic acid" is most appropriate for a substance that donates one proton when dissolved in water. A "diprotic acid" is a substance that donates two protons when dissolved in water. A "triprotic acid" is a substance that donates three protons when dissolved in water. Any ionic compound whose cation comes from a base and whose anion comes from an acid is called a "salt." The solution in the buret is called a "titrant." Finally, the solution in the flask is called an "analyte.

For more such questions on acid, click on:

https://brainly.com/question/25148363

#SPJ11

The chemical formula of 4- ethyl is C19H40.   This  patch is composed of an ethyl group( C2H5) attached to the fourth carbon  snippet( counting from one end) of a direct carbon chain.

It also has a propyl group( C3H7) attached to the fifth carbon  snippet of the same chain. The chain itself has 12 carbon  tittles and three methyl groups(- CH3) attached to the 3rd, 4th, and 7th carbon  tittles. thus, the complete name of the  emulsion is 4- ethyl, where" dodecane" refers to the 12- carbon chain.

This  patch belongs to the class of alkanes, which are hydrocarbons that only contain single bonds between carbon  tittles. The presence of the ethyl and propyl groups creates branching in the carbon chain, which can affect its physical and chemical  parcels compared to a direct alkane with the same number of carbon  tittles. The three methyl groups contribute to the  patch's overall shape and may also affect its reactivity.

Learn more about chemical formula at

https://brainly.com/question/12484831

#SPJ4

The question in english language is as follows:

What is the formula of 4-ethyl-5-propyl-3,4,7-trimethyldecane?

Before using a solution of NaOH as a titrant in a titration experiment, you should standardize the solution. Standardization is the process of titrating a solution prepared from a. an unknown concentration of stock solution.

A titration is a laboratory method of analyzing a solution's unknown concentration by adding a reagent to it until it reaches an endpoint. The most common type of titration is acid-base titration, in which an acid and a base are reacted to form a neutral solution. A titrant is a substance that is used to titrate a solution.

Standardization is the process of determining the precise concentration of a solution. The solution is titrated against a solution of known concentration to achieve this. The solution is titrated until the endpoint is reached. An endpoint is the point at which the reaction is finished.

Learn more about titration at:

https://brainly.com/question/13307013

#SPJ11

The catalyst in the given reaction mechanism is O.(g) (atomic oxygen).

O3(g) → O2(g) + O(g) NO(g) + O3(g) → NO2(g) + O₂(g) O(g) + NO2(g) → O2(g) + NO(g). The correct answer is option: C .

The reaction mechanism involves the formation and consumption of O atoms at various steps. Ozone (O3) decomposes to produce O2 and O atoms. These O atoms then react with NO2 to form NO and O2, which are further involved in the formation of O3. Therefore, the O atoms produced from the decomposition reaction of O3 act as a catalyst in this reaction mechanism. The correct answer is option: C.

To know more about decomposition reaction, here

brainly.com/question/8009068

#SPJ4

The gas' empirical formula is NO2. The gas has the chemical composition N2O4.

A molecular formula is the chemical representation of a molecular compound that lists the types and quantities of atoms that make up each molecule.

We must first find the empirical formula of the gas before using its molar mass to compute its molecular formula.

To calculate the empirical formula

We may infer that the gas has 69.6% oxygen (100% - 30.4%), since the gas includes 30.4% nitrogen. By assuming a 100 g sample of the gas, we may translate these percentages into mass ratios. This results in:

Nitrogen: 30.4 g

Oxygen: 69.6 g

The next step is to divide these masses by their corresponding atomic masses to obtain moles:

Nitrogen:30.4g/14.01g/mol=2.17 mol

Oxygen: 69.6 g / 16.00 g/mol = 4.35 mol

Nitrogen: 2.17 mol / 2.17 mol = 1.00

Oxygen: 4.35 mol / 2.17 mol = 2.00

Thus, NO2 is the gas' empirical formula.

The molar mass of the gas may be determined using the ideal gas law:

PV = nRT

n = PV/RT

n = (1 atm)(0.974 L)/(0.08206 L·atm/(mol·K))(273 K) = 0.0426 mol

Therefore, we have 0.0426 mol of the gas.

molar mass = 4.0 g/0.0426 mol = 93.9 g/mol

factor = molar mass of gas / molar mass of empirical formula

factor = 93.9 g/mol / 46.01 g/mol = 2.04 (rounded to two decimal places)

(NO2)2 → N2O4

N2O4 is the gas's molecular formula as a result.

To know more about empirical formula visit:-

https://brainly.com/question/11588623

#SPJ1

Real gases behave most like ideal gases under conditions of high temperature and low pressure. Option 2 is correct.

This is because at high temperatures, the kinetic energy of gas molecules increases, causing them to move faster and collide more frequently, which reduces the intermolecular forces between the gas molecules. At low pressures, the gas molecules are farther apart and the intermolecular forces are weaker, allowing the gas molecules to move more freely and behave more like an ideal gas.

At high pressures and low temperatures, the gas molecules are closer together and the intermolecular forces are stronger, causing deviations from ideal gas behavior. Hence the correct option is 2.

To know more about ideal gas, here

brainly.com/question/28257995

#SPJ4

Answer:

Explanation:

The balanced chemical equation for the reaction between copper (II) sulfate and sodium hydroxide is:

CuSO4 + 2NaOH → Cu(OH)2 + Na2SO4

We can use the mole ratio of CuSO4 to NaOH to find the number of moles of NaOH required to react with 0.100 moles/dm3 of CuSO4:

1 mole CuSO4 reacts with 2 moles NaOH

0.100 moles/dm3 CuSO4 will react with 0.200 moles/dm3 NaOH

Now we can use the volume and number of moles of NaOH to calculate its concentration:

25 cm3 = 0.025 dm3

Concentration of NaOH = number of moles / volume

Concentration of NaOH = 0.200 moles/dm3 / 0.025 dm3

Concentration of NaOH = 8.00 mol/dm3

Therefore, the concentration of sodium hydroxide in the solution is 8.00 mol/dm3.

The curve will have the points (0, 8.04), (halfway, 8.04), (equivalence point, 8.04), and (endpoint, 14). The points can then be connected to create a graph of the pH over the course of the titration.

At the start of the titration, before any KOH has been added, the concentration of HBrO is 0.200 M and the concentration of KOH is 0.000 M, so the pH can be calculated as:

pH = 8.04 + log ([0.000]/[0.200]) = 8.04 + log (0) = 8.04.

When the equivalence point is reached, the concentrations of the two reactants are equal, so the pH can be calculated as:

pH = 8.04 + log ([0.200]/[0.200]) = 8.04 + log (1) = 8.04.

At the end of the titration, when all of the KOH has been added, the concentration of KOH is 0.140 M and the concentration of HBrO is 0.000 M, so the pH can be calculated as:

pH = 14 + log ([0.140]/[0.000]) = 14 + log (infinity) = 14.

Using these four points, a titration curve can be drawn to represent the pH of the solution throughout the titration. The curve will have the points (0, 8.04), (halfway, 8.04), (equivalence point, 8.04), and (endpoint, 14). The points can then be connected to create a graph of the pH over the course of the titration.

Learn more about pH: brainly.com/question/172153

#SPJ11

The  structure for this compound is a symmetrical diamide.

Mechanism of the reaction:Benzil (2,2-diphenylethane-1,2-dione) is a white or slightly yellowish crystalline powder.

Benzil reacts with 1,2-diaminobenzene to give a compound with a molecular formula of C20H14N2. A structure for this compound and a reaction mechanism for how it is formed are suggested.

Structure of the compound:The compound is a symmetrical diamide. The diamide is derived from the reaction of benzil and 1,2-diaminobenzene as a condensation reaction, which can be illustrated as follows:

Reaction mechanism:The reaction of benzil with 1,2-diaminobenzene forms the symmetrical diamide. Benzil is a highly reactive electrophile that reacts readily with nucleophiles.

The 1,2-diaminobenzene is a strong nucleophile that reacts readily with electrophiles. The reaction can be represented as a nucleophilic substitution reaction.

Benzil is first deprotonated by 1,2-diaminobenzene to form an anion. This intermediate has nucleophilic character and attacks the electrophilic benzil carbon atom.

The intermediate then eliminates a water molecule, resulting in the formation of the symmetrical diamide.Mechanism of the reaction:

Benzil (2,2-diphenylethane-1,2-dione) is a white or slightly yellowish crystalline powder. It is practically insoluble in water and is slightly soluble in alcohol and ether.

The 1,2-diaminobenzene is a highly reactive nucleophile that readily attacks electrophiles. It is a white or yellowish solid that is soluble in alcohol and ether.

Molecular formula of the compound:This compound has a molecular formula of C20H14N2.

to know more about diamide refer here:

https://brainly.com/question/30437242#

#SPJ11

Answer: You should add a picture but just put that the mixing bowl will get water vapor around the bowl

Explanation: the mixing bowl will get water vapor around the bowl

The statements which are true include: it was an exothermic reaction and energy was transferred from the system to the surroundings. Thus, the correct options are A and B.

The reason for this reaction to be an exothermic reaction is that a negative ΔH value represents that the reaction or process was exothermic and as per the first law of thermodynamics, energy can neither be created nor destroyed, it only changes form from one form to another.

In this case, as the reaction is exothermic, it releases energy which was transferred from the system to the surroundings. Hence, the correct options will be A and B. The options C and D are incorrect options. The value of q is negative in this case, and the liquid would have become a solid instead of a gas, considering that there is no change in pressure or flexible container is used.

Learn more about Exothermic reaction here:

https://brainly.com/question/10373907

#SPJ11

There are approximately 4.34 x 10^20 Mg atoms in the 500 mL Nestle water bottle.

To determine the number of Mg atoms in the Nestle water bottle, we first need to convert the concentration from ppm to moles per liter (M).

So, the concentration of Mg in the bottle is:

Next, we need to calculate the number of moles of Mg present in 500 mL (0.5 L) of water:

To convert grams to moles, we need to divide by the molar mass of Mg, which is 24.31 g/mol:

Finally, we can calculate the number of Mg atoms using Avogadro's number:

To learn more about number of atoms, here

https://brainly.com/question/16858932

#SPJ4

The molar mass of the antibiotic is 42,308 g/mol.

The osmotic pressure of a solution is given by the equation:

π = MRT

where π is the osmotic pressure, M is the molarity of the solution, R is the gas constant, and T is the temperature in Kelvin.

We can rearrange this equation to solve for the molarity of the solution:

M = π / RT

First, let's convert the temperature to Kelvin:

23.6°C + 273.15 = 296.75 K

Now we can plug in the values:

M = (8.34 mm Hg) / (62.3637 Ltorr/molK * 296.75 K)

M = 1.16 x [tex]10^{-5}[/tex] M

To find the molar mass of the antibiotic, we need to use the formula:

M = m / (n * MM)

where m is the mass of the antibiotic (in grams), n is the number of moles of the antibiotic, and MM is the molar mass of the antibiotic (in g/mol).

We can rearrange this equation to solve for MM:

MM = m / (n * M)

To find n, we can use the formula:

n = M * V

where V is the volume of the solution (in liters).

V = 500.0 mL / 1000 mL/L = 0.500 L

n = (1.16 x [tex]10^{-5}[/tex] M) * (0.500 L) = 5.8 x [tex]10^{-6}[/tex] moles

Now we can plug in the values to find MM:

MM = (0.302 g) / (5.8 x [tex]10^{-6}[/tex] moles * 1.16 x [tex]10^{-5}[/tex] M)

MM = 42,308 g/mol

Therefore, the molar mass of the antibiotic is 42,308 g/mol.

To know more about antibiotic click here:

brainly.com/question/10868637

#SPJ4