which are true about lubricants for cutting? they are composed almost entirely of hydrocarbons with some additives. they should be used at lower cutting speeds than other types of cutting fluids. they make cutting surfaces smoother. they dissolve easily in water they make it easier for cutting chips to not to stick to the cutting tool. they reduce the temperature of the cutting tool, but not as much as other cutting fluids.

Answer:

C. The growth rate of an E. coli bacterial colony will increase as temperature increases from 10°C to 50°C.

Activation energy is defined as the energy difference between the reactant and the maximum in the energy profile diagram.

From the graph, it is clear that Path 1 is at higher energy than path 2. Which implies that we need to provide more energy to the reactant in order to cross the energy barrier of path 1 as compared to path 2. Therefore, the reaction will occur through path 2 where less amount of energy will be used in order to overcome activation energy barrier.

As soon as this energy barrier is crossed, the reaction can occur easily to form product.

The given question is incomplete so the I have answered according to general knowledge.

The diagram of the path is attached in the image given below.

Lear more about activation energy from the link given below.

https://brainly.com/question/28384644

#SPJ4

Not, it is not . Some types of archaea, bacteria, and plants/algae that obtain energy through alternative means.

Carbon dioxide is not a required molecule for all living things to survive. Some species of microorganisms, such as certain types of archaea and bacteria, can live in environments that are completely devoid of carbon dioxide. These organisms are known as chemolithotrophs and they obtain their energy by oxidizing inorganic molecules rather than organic molecules. Additionally, some species of plants and algae can also survive without carbon dioxide, by obtaining energy through a process known as heterotrophy.

So, to summarize, not all living things require carbon dioxide to survive, and species that do not require it include some types of archaea, bacteria, and plants/algae that obtain energy through alternative means.

Here you can learn more about Carbon dioxide

brainly.com/question/3049557

#SPJ4

Answer:

753 torr.

Explanation:

The pressure at the ground can be calculated using the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature.

First, we'll find n by using the fact that the number of moles is constant, n1V1 = n2V2. We'll use the ideal gas law to solve for P on the ground:

P = (nRT) / V = (n * R * (24 + 273.15) * 22.9) / 22.9 = (n * R * 297.15) / 22.9

Plugging in the initial values from the high altitude, we have:

n = (38.1 * 471) / (R * (0 + 273.15)) = (38.1 * 471) / (8.31 * 273.15)

So, finally:

P = (n * R * 297.15) / 22.9 = (38.1 * 471 * 8.31 * 297.15) / (22.9 * 273.15) = 753 torr

The pressure on the ground is 753 torr.

Answer:

Explanation:

could you help me please

Final answer: Lipid molecules are hydrophobic, which makes them insoluble in water.

A vast and varied family of biological molecules known as lipids are distinguished by their hydrophobicity, or inability to dissolve in water.The numerous nonpolar covalent linkages are what give lipids their hydrophobic properties.

Since hydrocarbons make up the majority of lipids, which create nonpolar covalent connections, lipids are hydrophobic, or water-fearing, and insoluble in water.

To know more about hydrophobic visit:

https://brainly.com/question/30074618

#SPJ4

(1) Bromination, (2) E2 elimination, and (3) epoxidation is formed by 1,2‑epoxycyclopentane from bromocyclopentane by dragging the appropriate formulas into the bin.

Step 1: Bromocyclopentane is reacted with hydrobromic acid and silver oxide to produce 1,2‑dibromocyclopentane.

Step 2: 1,2‑dibromocyclopentane is then reacted with a base, such as sodium hydroxide, to produce 1,2‑epoxycyclopentane.

Step 3: Finally, the 1,2‑epoxycyclopentane is reacted with aqueous acid to form 1,2‑epoxycyclopentane.

Bromocyclopentane responds with sodium methoxide to frame tertiary liquor, sulfated with sulfuric acid, then treated with base to yield 1,2-epoxy cyclopentane.

To learn more about the chemical reactions at

https://brainly.com/question/29762834

#SPJ4

Limestone Rock contains fossils reacts with hcl acid chemically formed (non-clastic)

Limestone, the most prevalent non-clastic sedimentary rock, is formed primarily through this biochemical extraction and secretion. Calcite (CaCO3), a close sibling of dolomite (CaMgCO3), makes up the majority of limestone's composition. Clastic and chemical are the two basic classifications of sedimentary rock. Clastic or detrital sedimentary rocks are composed mostly of sediment and bedrock fragments that have undergone mechanical weathering. Additionally, chemically weathered sediment may be found in clastic rocks. By sorting, grain size, and shape, clastic rocks are categorised. Chemical sedimentary rocks form when dissolved minerals are dissolved in water. Chemical rocks are categorised mostly based on the minerals that make up the rock.

To learn more about Fossils Please click on the given link:

https://brainly.com/question/11829803

#SPJ4

The IR (Infrared) wavenumbers and wavenumber ranges are important in the study of molecular vibrations and chemical analysis. The six important IR wavenumbers/wavenumber ranges are: 4000-3000 cm^-1 (yellow)

This wavenumber range is associated with the bending vibrations of O-H and N-H bonds in organic compounds, as well as the stretching vibrations of C-H bonds. The fingerprint region is also present in this range, where the majority of the peaks observed are due to the combination and overtone vibrations of functional groups.

3000-2800 cm^-1 (orange)

This wavenumber range is associated with the stretching vibrations of C-H bonds in alkanes and alkenes. This region is also known as the methylene stretching region.

2800-2400 cm^-1 (green)

This wavenumber range is associated with the stretching vibrations of C-H bonds in aromatic compounds and the bending vibrations of C-H bonds in aliphatic compounds. The peaks in this region are typically broader and less intense than the peaks in the previous regions.

1700-1500 cm^-1 (blue)

This wavenumber range is associated with the C=O stretching vibrations in carboxylic acids and esters, as well as the N-H bending vibrations in amines. This region is also known as the carbonyl stretching region.

1300-1000 cm^-1 (purple)

This wavenumber range is associated with the stretching vibrations of C-O bonds in alcohols and ethers, as well as the bending vibrations of N-H bonds in amides. This region is also known as the C-O stretching region.

1000-400 cm^-1 (red)

This wavenumber range is associated with the stretching vibrations of the skeleton and bending vibrations of functional groups in organic compounds. The peaks in this region are typically weaker and broader than the peaks in the previous regions.

It's important to note that these wavenumber ranges and associated vibrations are just a general guide and actual peaks may differ based on the specific compound being analyzed.

Here you can learn more about wavenumber range

https://brainly.com/question/29564915#

#SPJ11

The O-O bond's bond enthalpy is 495 kJ/mol.The bond enthalpies of the two O-O bonds are added to determine the enthalpy change of O2 dissociation (g). The breakdown of O2 (g) into two O atoms is described by the equation above.

The total bond enthalpies of the two O-O bonds, which equal -641 kJ/mol, represent the enthalpy change of O2 dissociation (g). The O-O bond's bond enthalpy is 495 kJ/mol, according to the table of bond enthalpies above.

This amount of energy is necessary to rupture one O-O bond in O2 (g). The energy needed to break both O-O bonds in O2 (g) is known as the enthalpy change of dissociation. As a result, the enthalpy change of O2 dissociation (g) is twice as high.

Learn more about  enthalpies  at:

https://brainly.com/question/29145818

#SPJ12

The 18 electron 32S-2 species. The sodium ion on the right has a total charge of -1 and consists of 17 proton and 18 electrons.

While electrons do not have quarks, protons and neutrons do. We believe that quarks and particles are basic particles that are not composed of lesser subatomic particles.

An electron is a negative charges atom that may either be unbound or bonded to another atom (not bound). One of the three main types of particles inside of an atom is an electrons that is bonded to it; the other two are quarks and neutrons.

To know more about electrons visit:

https://brainly.com/question/28977387

#SPJ4

At the instant when NO is reacting at the rate of  1.0 x 10⁻⁴ mol/L/s,

the rate of the reaction of O₂ is 5.0 * 10⁻³ mol/L/s and rate of the reaction of NO₂ is 1.0 x 10⁻⁴ mol/L/s.

The equation of the reaction is given below as follows:

2 NO (g) + O₂ (g) ----> 2 NO₂

The mole ratio of the reaction is given below:

The mole ratio of NO (g) to O₂ (g) is 2 : 1

The mole ratio of NO (g) to NO₂ is 1 : 1

The rate of the reaction or the rate at which NO is reacting is 1.0 x 10⁻⁴ mol/L/s:

The rate at which O₂ will be reacting ¹/₂ * 1.0 x 10⁻⁴ mol/L/s = 5.0 * 10⁻³ mol/L/s

The rate at which NO₂ will be reacting 1 * 1.0 x 10⁻⁴ mol/L/s = 1.0 x 10⁻⁴ mol/L/s

Learn more about the rate of reaction at: https://brainly.com/question/12904152

#SPJ1

Based on the plate boundaries where the given geologic events occur, Event A represents the creation of mountain ranges and Event B represents volcanic eruption.

The correct option is D.

When two tectonic plates diverge from one another, a divergent boundary results. Along these borders, earthquakes frequently occur and magma (molten rock) rises to the surface where it solidifies to form a new oceanic crust. Divergent plate boundaries include the Mid-Atlantic Ridge.

When two or more lithospheric plates collide, the result is a region on Earth known as a convergent boundary, also called a destructive boundary. Eventually, a plate subducts beneath another, a process is known as subduction. The Wadati-Benioff zone, a plane where numerous earthquakes take place, can be used to designate the subduction zone.

Learn more about divergent and convergent plate boundaries at: https://brainly.com/question/1193305

#SPJ1

One mole of Cobalt weighs 58.93319 grams, so 397.14 grams of Cobalt is approximately 6.77 moles.

To find the number of moles in a given mass of a substance, we use the formula:

moles = mass / molar mass

The molar mass of Cobalt is 58.93319 g/mol.

So, using the above formula:

moles = 397.14 g / 58.93319 g/mol = 6.77 moles

Read more about Cobalt here:

https://brainly.com/question/19863670

#SPJ1

The chemical reaction in which a hydrocarbon combines with oxygen to produce carbon dioxide, water, and heat is referred to as hydrocarbon combustion.

Hydrocarbons are molecules that are made up of both hydrogen and carbon. Energy is extracted from fossil fuels by combustion (burning).

Combustion is a chemical reaction in which a material combines quickly with oxygen and produces heat. The initial material is referred to as the fuel, while the supply of oxygen is referred to as the oxidizer.

Combustion is a high-temperature exothermic (heat-releasing) redox (oxygen-adding) chemical process that occurs between a fuel and an oxidant, generally ambient oxygen, to generate oxidized, frequently gaseous products in a mixture known as smoke.

Learn more about carbon dioxide

https://brainly.com/question/29968202

#SPJ4

Since hydrogen bonds are merely forces of attraction to the dipoles and not true bonds, they are the weakest. On two atoms that are strongly electronegative in nature and permanently bound to a hydrogen atom.

What kind of bond is weakest, and why?

Dispersion forces are a frequent name for the weakest links. When the electrons in two nearby atoms occupy positions that cause the atoms to temporarily form dipoles, the resulting transient attractive attraction is known as the dispersion force.

Which type of bond—covalent or ionic—is weak?

Ionic bonds typically outweigh covalent connections in strength. Ionic bonds result in a stable composite when all of the electrons between the components are transferred. Covalent bonds only involve the sharing of electrons between two parties.

To know more about hydrogen visit:

brainly.com/question/28937951

#SPJ4

The amount of sodium consumed by a person who eats two grams of salt depends on the sodium content of the salt.

Table salt is typically about 40% sodium, so 2 grams of salt contains approximately 0.8 grams of sodium (2 x 0.4 = 0.8).

Since 1 gram of sodium is equal to 2300 milligrams, then 0.8 grams of sodium is equal to 1844 milligrams (0.8 x 2300 = 1844).

So, a person who eats 2 grams of salt would consume approximately 1844 milligrams of sodium.

It is worth noting that the recommended daily intake of sodium is around 2300 milligrams, so this amount would be close to the recommended daily limit and it's important to monitor the sodium intake in your diet.

Sodium is an essential nutrient that is required for many important bodily functions, including fluid balance, nerve and muscle function, and maintaining healthy blood pressure levels. However, consuming too much sodium can have negative health effects, such as increased risk of heart disease, stroke, and high blood pressure.

That's why it's important to monitor the amount of sodium in your diet. The World Health Organization recommends that adults consume no more than 2,000 milligrams of sodium per day, which is equivalent to about 5 grams of salt. This is a moderate amount that can help maintain healthy blood pressure and reduce the risk of heart disease and stroke.

Learn more about blood pressure here:

https://brainly.com/question/4215574

#SPJ4

The pH of a buffer is equal to the pK of the weak acid. Therefore, the pH of the buffer for each weak acid is equal to its pK.

An acid is a substance that has a sour taste and can dissolve certain materials, such as metals. Acids contain hydrogen and can be identified by their pH level, which measures how acidic or basic a substance is. Acids have a pH level lower than 7, while bases are higher than 7. When mixed with a base, acids can create neutral solutions with a pH of 7. Examples of acids include acetic acid (found in vinegar), sulfuric acid (found in batteries), and citric acid (found in citrus fruits).

Hydrazoic acid: pH 3 (pK, of 4.6)

Acetic acid: pH 5 (pK, of 4.76)

Boric acid: pH 9 (pK, of 9.24)

Ammonium: pH 9 (pK, of 9.25)

Chloroacetic acid: pH 3 (pK, of 2.87)

Formic acid: pH 3 (pK, of 3.8)

To learn more about acid

https://brainly.com/question/25148363

#SPJ4

The quantum numbers must be the same for the orbitals that they designate to be the degenerate in a many-electron system is the correct option is (e) n and l only.

The degenerates orbital are the orbitals of the same sub shell and having the same energy. The quantum numbers are the set of the numbers which describes the energy , position of the electrons. The n is the principle quantum number. The principle quantum number  designate the electron shell of atom. The l is the azimuthal quantum number , which tells the shape of the orbital.

Thus the quantum number having the same orbitals are n and l only.

To learn more about quantum numbers here

https://brainly.com/question/14283614

#SPJ4

The rules for naming polyatomic ions and to ensure that the total positive and negative charges in the compound balance each other out.

When naming ionic compounds, parentheses are used to indicate the charge of a polyatomic ion. A polyatomic ion is a group of atoms that have a net charge and act as a single unit in a chemical compound. The charge of a polyatomic ion is indicated by a superscript following the ion's name, with a positive charge denoted by a "+" sign and a negative charge denoted by a "-" sign.

For example, consider the ionic compound sodium nitrate, which has the chemical formula NaNO3. Sodium nitrate contains the nitrate ion (NO3-), which is a polyatomic ion with a negative charge. In the name of the compound, the charge of the nitrate ion is indicated by parentheses: sodium nitrate (NO3-).

To know more about parenthese click here:

https://brainly.com/question/28146414#

#SPJ11

Find the atom's atomic number if you need to write the electron configurations for an atom of any element. When dealing with charged atoms, you should add one electron for every negative charge and take away one for every positive charge. Enter the electron configuration to show the atom's total number of electrons, broken down into orbital sets.

A numerical depiction of an atom's electron orbitals is called the electron configuration. The variously shaped areas surrounding an atom's nucleus known as electron orbitals are where electrons are predicted to exist mathematically. A reader can quickly and easily learn from an electron configuration both how many electron orbitals an atom has and how many electrons are present in each of those orbitals. You'll be able to construct your own configurations and ace those chemistry exams after you comprehend the fundamental ideas behind electron configuration.

Lean more about electron configurations here:

https://brainly.com/question/26084288

#SPJ4

The passage of sodium (Na+) and potassium (K+) ions through the cell membrane is what causes and sustains the action potential in a neuron.

Because there is a large concentration of K+ ions and a low concentration of Na+ ions inside the neuron while it is at rest, the inside of the cell has a negative charge compared to the exterior. An electrical signal opens the sodium ion channels in the neuron, allowing Na+ ions to enter the cell and produce an influx of positively charged ions. This shift in charge, known as depolarization, causes additional sodium channels to open and more potassium channels to close, further depolarizing the cell.

Eventually, the cell reaches its threshold for an action potential and generates an all-or-nothing electrical signal that travels along the neuron. After the signal has passed, potassium channels open, and potassium ions flow out of the cell, repolarizing the cell and resetting it to its resting state.

Learn more about cell membrane:

brainly.com/question/13524386

#SPJ4

Euglena is a microscopic organism that lives in freshwater ponds. It has chloroplasts, moves by a flagellum, and has an eyespot that allows them to sense light. Euglena would respond to sunlight by swimming towards the surface of the pond which is therefore denoted as option B.

This is referred to as a genus of unicellular, freshwater organisms that are very common in ponds and small bodies of water.

They have an eyespot that allows them to sense light and respond to it by swimming towards the surface of the pond which is where it is located for photosynthetic activity thereby making it the correct choice.

Read more about Sunlight here https://brainly.com/question/944068

#SPJ1

The statement is true, because when a scientist uses many specific observations to construct a general scientific principle, the scientist is using reasoning.

This is an example of inductive reasoning, which is a form of logical thinking that uses specific observations to create general principles.

The importance of scientists lies in their ability to develop testable explanations and predictions about the universe based on scientific evidence.

Learn more about scientist:

https://brainly.com/question/5019543

#SPJ4

Because they are solid materials, metals typically have regular patterns of tightly packed atoms. Valence electrons can be transported away from their atoms since they are so near to one another.

A lattice of positively charged metal ions is surrounded by a "sea" of free, delocalized electrons. Atoms are closely packed and pre-determinedly ordered in a metal. Metallic bonding: The electrons in the outer shell get delocalized and encircle the positive metal ions. Between them, there is a tremendous electrical attraction. A "sea" of free, delocalized electrons forms around a lattice of positively charged metal atoms when metal atoms are packed closely together in a regular configuration and the valency electrons tend to wander away from their atoms.

To learn more about electrons click here https://brainly.com/question/6283462

#SPJ4

When atoms' chemical bonds are established or ruptured, chemical processes take place. The ability to form molecules and crystals is made possible by a chemical bond, which is a strong attraction between atoms or ions.

The materials that initiate a chemical reaction are known as reactants, while the materials created as a result of the reaction are known as products. Though a chemical reaction is not necessarily a "one-way street," an arrow is drawn between the reactants and products to show the direction of the reaction.

Chemical bonding is the enticing force that binds diverse components (atoms, ions, etc.) together and stabilises them through a net loss of energy. Therefore, it is clear that chemical compounds depend on the strength of the chemical bonds that connect its individual parts; the more stable the final molecule, the stronger the chemical connections between its parts.

To know more about chemical reaction from the link

brainly.com/question/11231920

#SPJ4

The most helpful information in the table for determining whether the powder is pure NaCl is the percent purity.

This indicates the amount of pure NaCl in the sample relative to any other substances present. Additionally, the particle size and melting point of the sample can also be used to determine whether the powder is pure NaCl or not.

These tests can provide additional evidence that the powder is pure NaCl. It is also important to note that the presence of impurities can affect the particle size, melting point, and solubility of the sample, so these tests can help determine if the powder contains any impurities.

Learn more about NaCl:

https://brainly.com/question/28264019

#SPJ4

Answer:

The pressure change when a constant volume of gas is heated can be determined using the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant and T is the temperature in kelvins.

Since the volume is constant, we can assume that the change in pressure is proportional to the change in temperature, so we can use the equation:

ΔP = (nRT2 - nRT1) / V

where ΔP is the change in pressure, T2 is the final temperature, and T1 is the initial temperature.

To convert from degrees Celsius to kelvins, add 273.15 to the temperature in degrees Celsius. So, for an initial temperature of 30.0°C, T1 = 30.0 + 273.15 = 303.15 K. And for a final temperature of 40.0°C, T2 = 40.0 + 273.15 = 313.15 K.

Plugging in the values, we have:

ΔP = (nRT2 - nRT1) / V = (n * R * 313.15 - n * R * 303.15) / V = (R * 10) / V = R * 10 / V

The pressure change can be found by multiplying the result by the initial pressure:

ΔP = R * 10 / V * P1 = (8.31 J/mol * K) * 10 / V * 2.00 atm = 16.62 / V atm

The exact pressure change will depend on the volume of the gas, but since the volume is constant, the pressure change will always be equal to 16.62 / V atm.

Explanation:

Hydrogen fluoride have intermolecular hydrogen bonding.

HF being a liquid forms relatively strong hydrogen bonds, hence it have relatively high boiling point. Solid HF contains a number of zig-zag chains of HF molecules. The HF molecules, containing a short covalent H–F bond of 95 pm length, are linked to neighboring molecules by intermolecular H–F distances of 155 pm.

Being the lightest of the hydrogen halides, it has a surprisingly high boiling point, higher even than that of hydrogen iodide. The reason behind this is the strong electronegativity of the fluorine atom, which causes hydrogen and fluorine atoms to form hydrogen bonds in the liquid phase.

Learn more about hydrogen bonding from the link given below.

https://brainly.com/question/21054466

#SPJ4