Answer:
2 , 3 and 4
Explanation:
hope this helps you
What term describes a solution in which the dissolved solute is in equilibrium with the undissolved solute?
Saturated solution refer to a solution in which the dissolved solute is in equilibrium with the undissolved solute.
What is a saturated solution?A saturated solution is a chemical solution that contain maximum amount of a solute which is dissolved in the solvent. The addition of anotheg solute will not dissolve in a saturated solution. The amount of solute that can be dissolved in a solvent to form a saturated solution depends on a variety of factors.
Therefore, Saturated solution refer to a solution in which the dissolved solute is in equilibrium with the undissolved solute
Learn more about saturated solution here.
https://brainly.com/question/26765872
The term that describes a solution in which the dissolved solute is in equilibrium with the undissolved solute is saturated solution.
What is a saturated solution?A saturated solution is one in which there is so much solute that it would not dissolve if there was anymore.
When a saturated solution comes into contact with more solute, the extra solute does not dissolve or deposit.
Thus, the term that describes a solution in which the dissolved solute is in equilibrium with the undissolved solute is saturated solution.
Learn more about saturated solutions
https://brainly.com/question/1851822
#SPJ4
True or false: Energy is always transferred from high kinetic energy (temperature) too low kinetic energy (low temperature)
Answer:
true
Explanation:
Temperature is a measure of the average kinetic energy of the molecules, so energy would naturally be transferred from the molecules with more kinetic energy to the molecules with less kinetic energy
What is meant by the phrase “a consistent method of measurement"?
A. Things are measured the same way each time.
B. All measurements are in Sl units.
C. Every measurement is exactly the same numerical value.
D. The same person performs all measurements.
Answer:
A. Things are measured the same way each time.
Explanation:
HELPSPEPEP ILL BRAINLIST!!!
Explain the scale of recycling that is currently present in Australia and predict how traditional industries could be affected by an increase in recycling in Australia.
make it short and simple pls. ty.
Answer:
Negative impacts include: noise, air and odour pollution from collection and reprocessing facilities; costs to set up recycling infrastructure and education materials for new areas; and costs associated with innovations and technologies, which are likely to be passed on to end consumers in product prices.
Explanation:
1. Illustrate and describe the sequence in which ten electrons occupy the five
orbitals related to an atom's d sublevel.
List three reasons why nonvascular plants are important
Answer:
They are food for some animals. Some animals use them for nesting material. Humans can dry and burn some types of nonvascular plants as a fuel.
Explanation:
Some nonvascular plants produce various nutrients that are passed to the soil and can be used by other plants. Also, nonvascular plants that cover a large surface area help maintain the cohesion of the land by reducing the risk of erosion. Nonvascular plants are also very important to animals.
Hope it helps
Be great
327 mL of 3.2 M HCl can be diluted to make mL of 2 M HCI.
Answer:
204,375 mL.
Explanation:
327 mL - 3.2 M
x mL - 2 M
x= (2 M x 327 mL) /3.2 M
x= 204,375 mL.
When the following redox equation is balanced with smallest whole number coefficients, the coefficient for nitrogen dioxide will be _____. I2(s) hno3(aq) ⟶ hio3(aq) no2(g) h2o(l)
In a redox reaction, electron could be lost or gained. The coefficients in the balanced redox reaction are; 1/2, 5, 1, 5, 2, 1.
What is a redox reaction equation?A redox reaction equation shows the species that were oxidized or reduced in a redox reaction. In this case, we are asked for the coefficients in a balanced redox reaction equation.
We must recall that five electrons were lost/gained in the process hence the balanced reaction equation is;
1/2I2 + 5HNO3 -----> IO3^- + 5NO2 + 2H2O + H^+
The coefficients in the balanced equation therefore are; 1/2, 5, 1, 5, 2, 1.
Learn more about redox reaction: https://brainly.com/question/13293425
The following redox equation is balanced with the smallest whole number coefficients, the coefficient for nitrogen dioxide will be 10.
What are redox reactions?
In redox reaction, there is transfer of electrons between the species of the reactions.
The given redox reaction is
[tex]\rm I2 (s) + HNO_3 (aq) -- > HIO_3 (aq) + NO_2 (g) + H_2O[/tex]
To find coefficient of the compounds of the reaction, there are coefficient calculator present.
Thus, the coefficient for nitrogen dioxide will be 10.
Learn more about redox reactions
https://brainly.com/question/13293425
#SPJ4
How does an electron move from the ground state to an excited state?
Answer:
It goes through a process called absorption. This is when an atom absorbs the energy from its surroundings. The electrons move from the ground state to the excited state because of this process. Once the atoms absorb energy, that affects the inner development when shifting to a new state of being.
Explanation:
The process that is known as absorption is when an atom absorbs energy from its surrounding racing it's energy level causing it to go into an excited state or highly-reactive state. When an atom goes through this process, electrons absorb the energy and raise to higher energy levels, therefore raising the stage of itself. This is how it gets into a excited state.
A 1.775g sample mixture of potassium hydrogen carbonate is decomposed by heating. if the mass loss is 0.275g what is the percentage of khco3
A 1.775g sample mixture of KHCO₃ is decomposed by heating. if the mass loss is 0.275g, the mass percentage of KHCO₃ is 70.4%.
What is a decomposition reaction?A decomposition reaction can be defined as a chemical reaction in which one reactant breaks down into two or more products.
Step 1: Write the balanced equation for the decomposition of KHCO₃.2 KHCO₃(s) → K₂CO₃(s) + CO₂(g) + H₂O(l)
The mass loss of 0.275 g is due to the gaseous CO₂ that escapes the sample.
Step 2: Calculate the mass of KHCO₃ that formed 0.275 g of CO₂.In the balanced equation, the mass ratio of KHCO₃ to CO₂ is 200.24:44.01.
0.275 g CO₂ × 200.24 g KHCO₃/44.01 g CO₂ = 1.25 g KHCO₃
Step 3: Calculate the mass percentage of KHCO₃ in the sample.There are 1.25 g of KHCO₃ in the 1.775 g sample.
%KHCO₃ = 1.25 g/1.775 g × 100% = 70.4%
A 1.775g sample mixture of KHCO₃ is decomposed by heating. if the mass loss is 0.275g, the mass percentage of KHCO₃ is 70.4%.
Learn more about decomposition reactions here: https://brainly.com/question/14219426
A world with both liquid water on its surface and carbon dioxide in its atmosphere is unstable because.
Explain why the amino group of p-aminobenzoic acid does not participate in the reaction
This is because amino group of p-aminobenzoic acid is an aniline and is less electrophilic than an alkyl amine.
What is an Aniline?This is an aromatic amine which consists of a phenyl group attached to an amino group.
The amino group of p-aminobenzoic acid being an aniline makes it less electrophilic which is why an alkyl amine participates in the reaction instead.
Read more about Aniline here https://brainly.com/question/9982058
The amino group of p-aminobenzoic acid does not participate in the reaction as this is an aniline and is less electrophilic than an alkyl amine.
What is an Aniline?Aniline is an aromatic amine molecule in which phenyl group is attached with an amino group.
The amino group present in the p-aminobenzoic acid behave as an aniline as a result of which it becomes less electrophilic in nature and this is the reason why an alkyl amine participates in the reaction instead of the p-aminobenzoic acid.
Hence amino group of p-aminobenzoic acid is less electrophilic in nature and that's why not participate in the reaction.
To know more about aniline, visit the below link:
https://brainly.com/question/24316939
#SPJ4
How many atoms are there in 12 moles of sulfur
What is the molarity of a solution in which 25g NaCl in a 2.00 L solution?
Mass of sodium :- 23 grams
Mass of Chlorine :- 35.5 grams
Mass of NaCl :- 58.5 grams
mass given :- 25 grams
moles :- 0.432 ( given mass/ ionic mass)
[tex]molarity = \frac{moles}{vol} \\ molarity = \frac{0.432}{2} \\ molarity = 0.216 \: mole{l}^{ - 1} or \: molar[/tex]
really need help with this
This is a microscope.
Hope this clears that up for you.
What is the temperature of the flame in degrees Celsius?
You measure the flame of a candle and get a reading of 1,376.06 K. This value is equal to
Answer:
- Deep red fire is about 600-800° Celsius
- Answer: {1102.91}
Given: K= °C + 273.15
K = 1,376.06
Since you’re trying to find C (Celsius) you want to get C by itself in the problem. So you subtract 273.15 from that side. Anything you do to one side of the equal sign you have to do to the other side, so also subtract 273.15 from K (1,376.06).
1,376.06 - 273.15 = {1102.91°C}
In addition to not causing damage to the sample, what is another advantage of using a microspectrophotometer to analyze fibers?
The fiber’s spectra can also be polarized.
The sample can be quite small.
The sample can originate from a known source.
The fiber sample’s dye can be extracted.
Another advantage of advantage of using a microspectrophotometer to analyze fibers asides not causing damage to the sample is that the sample can be quite small.
What is a microspectrophotometer?Microspectrophotometry is a biological technique used to measure the absorption or transmission spectrum of a solid or liquid material in either transmitted or reflected light.
Microspectrophotometry can also measure the emission of light by a sample, which is usually small as the micro implies.
One advantage of microspectrophotometry is that the sample does not get damaged. However,
However, another advantage of advantage of using a microspectrophotometer to analyze fibers asides not causing damage to the sample is that the sample can be quite small.
Learn more about microspectrophotometry at: https://brainly.com/question/5832827
A chemical reaction needs to occur at a certain temperature, but one liquid is coming from a reactor at a much hotter temperature. what might be used to cool the liquid? question 3 options: cooling pool steam turbine heat exchanger boiler
The medium that might be used to cool the hot liquid coming from a reactor is : ( C ) Heat exchanger
Function of the heat exchangerHeat exchanger is used for the transfer of heat between liquids to be used in a chemical reaction, It can be used for both Cooling and heating to achieve the desired temperature.
The liquid coming from a reactor which posses a very high temperature will be passed through the heat exchanger so that its temperature will attain the required temperature for the experiment.
Hence we can conclude that The medium that might be used to cool the hot liquid coming from a reactor is Heat exchanger.
Learn more about heat exchanger : https://brainly.com/question/25154137
Hello people ~
Water cannot be used as a fire extinguisher to put out –
A. Burning charcoal
B. Burning cloth
C. Burning oil
D. Burning wood
Answer:
C. Burning oil
Explanation:
Water cannot be used as a fire extinguisher to extinguish the flames of burning oils such as gasoline, petrol, or diesel. Because oil is lighter than water, it floats on top of it and cremates. Furthermore, as the water spreads and carries the oil with it, the fire spreads over a larger area.
I am joyous to assist you at any time.
Answer:
Burning oil
Explanation:
oil has lower density than waterAs water has higher density it will sink down and oil will be over it .So it can't control the oil related fireCan you store cuso4 in an aluminum container? explain your reasoning
We can store the copper sulphate solution in alumiun container, if cover on alumiun is present.
Can you store cuso4 in an aluminum container?Aluminium is more reactive than copper so the Aluminium will displace copper sulphate from its solution by reacting with it but if there is cover on the aluminium then the alumium can't react with copper.
So we can store the copper sulphate solution in alumiun container.
Learn more about container here: https://brainly.com/question/11459708
No, we cannot store CuSO₄ in an aluminum container because aluminum will displace the copper present in the solution.
Why do different chemicals require different containers?Different chemicals are put in different containers, usually glass, plastic, dark container, or light container.
Chemicals element are reactive to different substances and to each other.
That's why they are put in separate and different types of containers according to their reactivity.
Thus, No, we cannot store CuSO₄ in an aluminum container because aluminum will displace the copper present in the solution.
Learn more about copper sulfate
https://brainly.com/question/22560035
#SPJ4
help Light reflecting from the aluminum coating on a CD ____________ and then interferes.
A. Diffracts
B. Refracts
C. Vibration
D. Reflection
Answer:
Reflection
Hope it will help you
Hello people ~
Which of the following reactions can also be termed as thermal decomposition reaction?
(a) Combination Reaction
(b) Decomposition Reaction
(c) Displacement reaction
(d) Double displacement reaction
Answer:
Decomposition reaction
Explanation:
When a single reactant is decomposed into two or more products that reaction is called decomposition reaction.
Thermal decomposition usually refers to exothermic reactionA lots of amount of heat is released in thisOption B is correct
Direction: Label the effort, resistance, and fulcrum of the following simple machines.
[tex]••••••••••••••••••••••••••••••••••••••••••••••••[/tex]
[tex] \large{ \pink{ \underline{ \purple{ \rm{Rules:}}}}}[/tex]
Correct answer = Brainliest
Wrong answer = Report
Complete answer = Brainliest
Incomplete answer = Report
Based on the question = Brainliest
Not on the question = Report
[tex]••••••••••••••••••••••••••••••••••••••••••••••••[/tex]
Note: If someone answer my question I will give you a big reward!.
Thank you!!
[tex]\color{cyan}{\begin{gathered} \gamma \\ \huge\boxed{ \ddot \smile}\end{gathered}} [/tex]
Define acid and base according to lewis theory, arrhenius theory and lawn theory
Answer:
Three principal theories about acid-base are,
1. Arrhenius theory
2. Bronsted-Lowry theory
3. Lux-Flood definition
4. Lewis theory
5. Usanovich definition
1. According to the Arrhenius, acids give up hydrogen ion in aqueous medium and a base give up hydroxyl ion in its aqueous medium. Examples are aqueous solution of HCl, CH3COOH, PhCOOH, and H2SO4. These give up H+ in an aqueous medium. Aqueous solutions of NaOH, Ca (OH)2 are Arrhenius bases.
Arrhenius theory has some limitations. This theory cannot explain the acidic nature of BF3 or basic behavior of NH3. This theory fails to give any explanation about acidity and basicity which does not produce H+ and OH- in their aqueous solutions.
2. According to the Bronsted-Lowry, an acid releases proton and a base accepts proton. NH3 accepts proton and forms ammonium ion, so ammonia acts as a base.
But this theory also has limitations. According to this theory acidic behavior of BF3 still cannot be explained.
3. Lux-Flood describes the acid-base theories based on oxide ion transformation. It gives clear explanation for acid-bases theories of non-protonic system. According to them, a base will donate the oxygen atom and an acid will accept oxygen atom.
4. According to the Lewis theory, acids are those substances which accept electron pair and base are those substances which donates electron pairs. Lewis theory can explain the acidic nature of BF3. In BF3, B is two electrons short to fulfil its octet. So it can accept a pair of electrons from an electron donating substituent. So it is an electron pair acceptor compound and acts as an acid.
Substances which have π electrons can donate electron pair to an electron deficient substance and acts as a base. Ethylene and acetylene is Lewis bases. AlCl3, PCl3 are Lewis acids.
5. According Usanovich, an acid is some chemical species which would react with bases and yields cations or accepts anions or electrons. A base is some chemical species which would react with acids, yield anions or electrons or combine with cations.
Explanation:
The percentage of keys you type correctly is A. accuracy B. correctness C. exactness D. precision WHO EVER GETS THIS EARNS BRAINLIST!
Use Figure 2 to describe which type of microscope the scientists should use to study the features of the hairlike organelles. Explain one possible function for these organelles based on where the organelles are located in the cell model in Figure 1
The Figure is not found here but the tiny hairlike organelles are also referred to as cilia.
What are cilia?Cilia are a special type of hairlike organelles capable of covering the surface of cells in many different organisms.
Cilia are found in different eukaryotic organisms ranging from unicellular protists to mammals (epithelial tissues).
The function of cilia is to produce motion (movement) of the cell in which these structures are found.
Learn more about cilia here:
https://brainly.com/question/226194
The volume of a certain gas is 29.3 liters at STP. what would the volume of the same gas at 1.39 atmospheres and -23.0℃?
A. 23 L
B. 37.3 L
C. 19.3 L
D. 22.4 L
Option C) 19.3L is the correct answer.
Hence, the final volume of the gas at the standard atmospheres and temperature is 19.3L.
Given the data in the question;
Initial volume of gas; [tex]V_1 = 29.3L[/tex]At Standard temperature and pressure( STP)
Initial temperature; [tex]T_1 = 273.15K[/tex]Initial pressure; [tex]P_1 = 1.00atm[/tex]Then
Final pressure; [tex]P_2 = 1.39atm[/tex]Final temperature; [tex]T_2 = -23.0^0C = 250.15K[/tex]Final Volume; [tex]V_2 = \ ?[/tex]
Combined gas lawCombined gas law combines both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.
It is expressed as;
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}[/tex]
To determine the new volume of the gas, we substitute our values into the expression above.
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}\\\\P_1V_1T_2 = P_2V_2T_1\\\\1.00atm * 29.3L * 250.15K = 1.39atm * V_2 * 273.15K\\\\7329.395atm.L.K = 379.6785atm.K * V_2\\\\V_2 = \frac{7329.395atm.L.K}{379.6785atm.K} \\\\V_2 = 19.3L[/tex]
Option C) 19.3L is the correct answer.
Hence, the final volume of the gas at the standard atmospheres and temperature is
Learn more about the combined gas law: https://brainly.com/question/25944795
Question 6 of 10
Which of these accurately describes a difference between nuclear energy and
fossil fuel?
O A. In nuclear fuel reactions, heat is released that is used to do work.
O B. Nuclear fuel has a higher energy density than fossil fuels.
O C. Fossil fuels have a higher energy density than nuclear fuel.
O D. In fossil fuel reactions, heat is released that is used to do work.
Answer:
b. nuclear fuel has a higher energy density than fossil fuels.
Explanation:
Nuclear fuel is a quantity of energy measured in joules; therefore, it has the same units as electrical and mechanical energy.
Which of the following was not an invention of the Han period?
A. Porcelain
B. Wheelbarrow
C. Paper
D. Silk
Answer:
Silk! All the others were inventions of the Han period.
Explanation:
Silk fabric was invented in Ancient China. Legend has it that the process for making silk cloth was first invented by the wife of the Yellow Emperor, Leizu, around the year 2696 BC.
- profparis
Hi hello this system to have to ask question for answers is not good. I’m poor
Answer:
so what do you need help with?
Explanation:
Answer:
what do you need help with i will try to answer
Explanation: