where is the equilibrium shifts when the concentration of h2(gas) is increased by adding more hydrogen gas to the container at constant temperature?

3. a) One possible mechanism for this reaction is: 3 Fe + 4 H₂O ⇌ Fe₃O₄ + 4 H₂

b) A catalyst is a substance that increases the rate of a chemical reaction without undergoing any permanent chemical change itself.

c) second-order reaction.

4. a) The expression of the equilibrium constant for the given reaction is:

Kc = ([Fe₃O₄][H₂]⁴) / ([Fe]³[H₂O]⁴)

b) Increasing the pressure will favor the indirect reaction and slow down the direct reaction.

c) Since the indirect reaction is favored by the increased pressure, the chemical equilibrium will shift to the right, towards the product side.

The method of initial rates involves measuring the initial rate of the reaction under different initial concentrations of the reactants. By comparing the initial rates, we can determine the order of the reaction with respect to each reactant.

Assuming that the rate law of the reaction is:

rate = k[Fe]^x[H₂O]^y

where k is the rate constant, and x and y are the orders of the reaction with respect to Fe and H2O, respectively.

Experimentally, measure the initial rate of the reaction under different initial concentrations of Fe and H₂O while keeping the concentration of the other reactant constant.

For example, suppose we measure the initial rates of the reaction at the following initial concentrations:

Experiment #1: [Fe] = 0.1 M, [H₂O] = 0.2 M, initial rate = 0.005 M/s

Experiment #2: [Fe] = 0.2 M, [H₂O] = 0.2 M, initial rate = 0.02 M/s

Experiment #3: [Fe] = 0.4 M, [H₂O] = 0.2 M, initial rate = 0.08 M/s

Use the rate data to determine the orders of the reaction with respect to Fe and H₂O. To do this, we compare the initial rates of the reaction under different initial concentrations of Fe and H₂O while keeping the concentration of the other reactant constant.

Suppose we double the concentration of Fe while keeping the concentration of H₂O constant. According to experiment 2 and experiment 1, the rate of the reaction doubles. This means that the order of the reaction with respect to Fe is 1.

Similarly, if we double the concentration of H₂O while keeping the concentration of Fe constant, we can see that the rate of the reaction doubles from experiment 1 to experiment 3. This means that the order of the reaction with respect to H₂O is also 1.

Therefore, the overall order of the reaction is the sum of the orders of the reactants, which is:

overall order = 1 + 1 = 2

Hence, the given reaction is a second-order reaction.

Learn more here on mechanisms here: https://brainly.com/question/27921705

#SPJ1

The complete question is:

3. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Identify a possible mechanism. b) Define catalyst c) Determine the general order of the reaction. 4. For the reaction at equilibrium: 3Fe+410 Fe,0+4H a) Write the expression of the equilibrium constant. b) Show how the speed of the direct and indirect reaction changes, if the pressure increases 3 times. e) Argue whether the chemical equilibrium shifts when the pressure increases 3 times. (4 points)​

Answer:

The number of protons in a water molecule (H2O) is equal to the number of hydrogen atoms in the molecule, which is 2. The molar mass of water is approximately 18.015 g/mol, which means that one mole of water contains Avogadro's number (6.022 x 10^23) molecules. Therefore, the number of protons in one mole of water is:

2 x 6.022 x 10^23 = 1.2044 x 10^24

To find the number of protons in 306 mL of water, we need to first convert the volume to moles. The density of water is approximately 1 g/mL, so the mass of 306 mL of water is:

306 mL x 1 g/mL = 306 g

The number of moles of water is then:

306 g / 18.015 g/mol = 16.991 mol

Multiplying this by the number of protons per mole, we get:

16.991 mol x 1.2044 x 10^24 protons/mol = 2.049 x 10^25 protons

Therefore, the answer is option D, 1 * 10 ^ 25

The main difference between a saturated solution and a supersaturated solution is concentration of the solute.

A saturated solution contains the maximum amount of solute that can be dissolved under the given conditions, while a supersaturated solution contains more solute than is normally possible. A saturated solution contains the maximum amount of solute that can be dissolved in a given solvent at a specific temperature and pressure. In a saturated solution, the concentration of solute is in equilibrium with the concentration of undissolved solute, which is in dynamic equilibrium with the dissolved solute. A supersaturated solution, on the other hand, is a solution that contains more solute than is normally possible to dissolve in the solvent under the given conditions.

To know more about  supersaturated solution, here

brainly.com/question/16817894

#SPJ4

The following changes would be expected in the pond over the same time period include increased levels of heavy metals and increased number of fish species. Thus, the correct options are II and III.

pH is an essential factor in pond ecosystems. Any change in pH has a substantial effect on aquatic life. The pH of a pond is affected by a variety of factors. Acid rain, industrial contamination, and sewage pollution are just a few examples. The following changes would be expected in the pond over the same time period:

Increased levels of heavy metals, which are caused by pollution. This increased levels of heavy metals would result in the loss of several fish species from the pond.

Therefore, the correct option will be D.

Learn more about pH here:

https://brainly.com/question/491373

#SPJ11

Answer:

False.

The experimental group is the group that is subjected to a specific treatment or intervention in an experiment, while the control group is the group that is left alone or given a placebo to compare the effects of the treatment.

Answer:

[tex]\frac{18}{9} F[/tex] The closest answer to your question would be Fluorine (F), no atom has 7 protons and 11 electrons.

Explanation:

The atomic number is the number of protons (Z)

The mass number is the number of protons + the number of neutrons (A)

The atomic symbol identifies the element (X)

[tex]\frac{A}{Z}X[/tex]

The number of moles of NaOH used in this titration of a 25.00 ml monoprotic strong acid solution is 0.0007919 moles.

In order to find out the number of moles of NaOH used in a titration, we can use the formula:

moles of NaOH = concentration of NaOH × volume of NaOH used in titration

Given:Volume of monoprotic strong acid solution = 25.00 mL

Concentration of NaOH = 0.09014 M

Volume of NaOH used in titration = 8.781 mL

We can convert mL to L by dividing it by 1000. So,Volume of monoprotic strong acid solution = 25.00 mL = 25.00/1000 L = 0.02500 L

moles of NaOH = concentration of NaOH × volume of NaOH used in titration= 0.09014 M × 8.781/1000 L= 0.0007919 moles of NaOH

Hence, the number of moles of NaOH used in this titration is 0.0007919 moles.

More on titration: https://brainly.com/question/15568269

#SPJ11

The starch solution and the water are separated by a semipermeable membrane. In comparison to pure water, the fluid in the tube is hypertonic.

When a plant cell is immersed in pure water, it absorbs water molecules through osmosis because its water potential is lower than that of the water around it. Due to its robust cellulose cell wall, it does not absorb water until it bursts.

In contrast to the inside of a cell, which is hypertonic, 100% distilled water is a b) hypotonic solution. This is due to the greater solute content inside.

To know more about hypertonic visit:-

https://brainly.com/question/13886457

#SPJ1

The binding of a neurotransmitter to its receptor at an inhibitory synapse can lead to the opening of chloride channels which is option E.

The binding of a neurotransmitter to its receptor at an inhibitory synapse can lead to the opening of chloride channels, allowing chloride ions to enter the cell and making the inside of the cell more negative.

This is known as hyperpolarization and makes it more difficult for the neuron to fire an action potential, thus inhibiting the transmission of the signal. In contrast, at an excitatory synapse, the binding of a neurotransmitter to its receptor can lead to the opening of sodium or calcium channels, allowing positive ions to enter the cell and making the inside of the cell more positive, depolarizing the cell and making it more likely to fire an action potential.

Learn more about neurotransmitters at

https://brainly.com/question/9725469

#SPJ4

Answer: 2.77

Explanation: pH=-log[H+] (=-log[H3O+])

pH=-log[1.7*10^-3]=2.77

The total number of valence electrons that are present in a molecule of PCl3 is 26.

PCl3 stands for Phosphorus Trichloride. The molecular structure of PCl3 is trigonal pyramidal. It has three chlorine atoms and one phosphorus atom, which are bonded by three covalent bonds.

In order to determine the total number of valence electrons in PCl3, first we have to Count the valence electrons present in each atom. Phosphorus has 5 valence electrons. Chlorine has 7 valence electrons then Add the valence electrons from each atom.

P = 5 e- (phosphorus has 5 valence electrons)

Cl = 7 e- (chlorine has 7 valence electrons)

Total valence electrons in PCl3 = 5 + 7 × 3 = 5 + 21 = 26.

Therefore, there are 26 valence electrons in a molecule of PCl3.

For more such questions on valence electrons, click on:

https://brainly.com/question/371590

#SPJ11

6.07 g of sulfur must react to produce 9.30 L of sulfur dioxide at 740 mm Hg and 125°C.

The given conditions of the reaction can be used to find the number of moles of sulfur dioxide using the ideal gas law, PV = nRT, where P = 740 mmHg, V = 9.30 L, T = 125 + 273 = 398 K, and R = 0.0821 L atm/mol K.

First, we need to convert pressure to atm. 1 atm = 760 mmHg, therefore, P = 740 mmHg/760 mmHg/atm = 0.974 atm

Using the ideal gas law, we have:

0.974 atm × 9.30 L = n × 0.0821 L atm/mol K × 398 K

n = 0.377 mol

The balanced equation for the reaction is:

S + 2O2 → 2SO2

For every 2 moles of SO2 produced, 1 mole of sulfur is required. Therefore, the moles of sulfur required to produce 0.377 mol of SO2 is 0.377/2 = 0.1885 mol.

The molar mass of sulfur is 32.07 g/mol, so the mass of sulfur required is:

0.1885 mol × 32.07 g/mol = 6.07 g

To learn more about ideal gas law, here

https://brainly.com/question/28257995

#SPJ4

The balanced chemical formula for the given scenario is 2{\rm NO}_2(g)\ +\ O_2(g)\ +\ 2H_2O(l)\ \rightarrow\ 2H{\rm NO}_3(aq)

To write the chemical formula for the given scenario, it is necessary to balance the chemical reaction equation by following the law of conservation of mass.

Nitric acid is a component of acid rain. Acid rain is caused by air pollution, and it occurs when the nitrogen dioxide pollutant \left({\rm NO}_2\right) reacts with gaseous oxygen  \left(O_2\right) and liquid water  \left(H_2O\right) to form aqueous nitric acid (HNO3).The balanced chemical equation for this reaction is:

2{\rm NO}_2(g)\ +\ O_2(g)\ +\ 2H_2O(l)\ \rightarrow\ 2H{\rm NO}_3(aq)

The balanced equation states that two molecules of nitrogen dioxide gas react with one molecule of oxygen gas and two molecules of liquid water to produce two molecules of aqueous nitric acid. The coefficients ensure that the equation is balanced according to the law of conservation of mass.

Learn more about Chemical formula:

https://brainly.com/question/26694427

#SPJ11

Answer: I think its 111.6

Explanation:

The least energetic spectral line in the infrared series of an atom is n = 3. The energy of the electron in the n = 3 state is -1.51 x 10⁻¹⁹ J.

The formula used to calculate wavelength of a photon is given as:

λ = c / ν

where

c = the speed of light = 2.998 × 10⁸ m/sν = the frequency of the photon

The frequency of the photon absorbed for a transition of an electron from the n = 3 state is given by:

ΔE = E_final - E_initial

where

ΔE = the energy absorbed

The energy of the electron in the n = 2 state is -3.40 x 10⁻¹⁹ J.

these values, we can calculate the energy of the absorbed photon.

ΔE = -1.51 × 10⁻¹⁹ J - (-3.40 × 10⁻¹⁹ J)ΔE = 1.89 × 10⁻¹⁹ J

The frequency of the photon is given by:

ΔE = hν

Where

ν = ΔE / hν = 1.89 × 10⁻¹⁹ J / (6.63 x 10⁻³⁴ J·s)

ν = 2.85 x 10¹⁴ Hz

The wavelength of the photon is given by:

λ = c / νλ = 2.998 × 10⁸ m/s / 2.85 x 10¹⁴ Hzλ = 1.05 × 10⁻⁶ m

Therefore, the wavelength of the photon absorbed for a transition of an electron from the n = 3 state that results in the least energetic spectral line in the infrared series of the atom is 1.05 × 10⁻⁶ m (rounding to significant figures).

Learn more about energy: https://brainly.com/question/25959744

#SPJ11

Answer: The cell potential of the given voltaic cell is 1.56 V.

Explanation:

To calculate the cell potential, we first need to determine the half-cell potentials for each half-reaction.

For the silver half-cell, the half-reaction is:

Ag⁺(aq) + e - -> Ag(s) E° = +0.80 V

For the zinc half-cell, the half-reaction is:

Zn²⁺(aq) + 2e - -> Zn(s) E° = -0.76 V

To calculate the cell potential, we need to subtract the reduction potential of the anode (the zinc half-cell) from the reduction potential of the cathode (the silver half-cell):

Ecell = E°cathode - E°anode

Ecell = (+0.80 V) - (-0.76 V)

Ecell = +1.56 V

Thus, the cell potential for the given voltaic cell is 1.56 V.

Learn more about cell potential here:

https://brainly.com/question/1313684

#SPJ11

The distance molecules diffuse in a medium is an example of diffusion after a tie of 3'To is 1.73 × Ro. Thus, the correct option is D.

Diffusion is a physical process that occurs when molecules in a substance move from a region of high concentration to a region of lower concentration until a uniform concentration is obtained. The molecules continue to move even after the concentration is uniform, but at a slower rate.

One-dimensional diffusion is a special case of diffusion that occurs in a straight line, with no other directions being affected. It only occurs in one direction, resulting in a change in concentration. For instance, diffusion across a flat surface. Formula to calculate distance traveled in time T using one-dimensional diffusion is:

Ro² = 2D × T

where, Ro is the distance traveled by the molecules in time T, and D is the diffusion coefficient of the substance in the medium.

The distance that the molecules will have diffused in a time of 3'To will be: Ro×√3. Using the formula of one-dimensional diffusion and solving for the distance Ro, we have:

Ro² = 2D × To

Solving for Ro, we get: Ro = √2D × To

After a time of 3'To, the molecules would have traveled a distance of Ro × √3.

Therefore, the correct option is D.

Learn more about Diffusion here:

https://brainly.com/question/14852229

#SPJ11

The equilibrium equation for the reaction between hydrochloric acid (HCl) and calcium carbonate (CaCO3)

2HCl + CaCO3 → CaCl2 + CO2 + H2O

For more information on percentage yield kindly visit to

https://brainly.com/question/31127824

#SPJ1

From highest to lowest atomic radius:

Potassium > Lithium > Carbon > Boron > Fluorine.

Atomic number is the number of protons found in the nucleus of an atom, which determines the element and its unique properties. It is denoted by the symbol "Z" and is listed in the periodic table of elements along with the element's symbol, name, and atomic mass.

The nucleus is the central core of an atom, composed of protons and neutrons, which are collectively known as nucleons. It is located at the center of the atom and contains almost all of its mass. The number of protons in the nucleus determines the identity of the atom and is referred to as the atomic number. The nucleus is held together by the strong nuclear force, which is one of the four fundamental forces of nature.

To know more about  atomic number visit :

https://brainly.com/question/8834373

#SPJ1

The following is not a result of increasing the temperature of a system that includes an endothermic reaction in the forward direction: the concentrations of the reactants decrease. Therefore, the correct answer is D.

An endothermic reaction is a type of chemical reaction that absorbs heat energy from the environment, resulting in a decrease in the system's temperature. Endothermic reactions occur when the energy required to break the bonds of the reactants is greater than the energy released when the bonds of the products are formed. In an endothermic reaction, energy is absorbed by the system from its surroundings.

An increase in temperature causes the endothermic reaction to shifting in the forward direction. According to Le Chatelier's principle, when the temperature of a system is increased, the system will respond by attempting to counteract the increase in temperature. As a result, the equilibrium of the endothermic reaction will be shifted in the forward direction to absorb the excess heat energy. The concentration of the reactants decreases while that of the products increases. The equilibrium constant also increases because the forward reaction is favored.

Learn more about Le Chatelier's principle at https://brainly.com/question/2943338

#SPJ11

The substrate below is primary and will undergo an [tex]SN^2[/tex] reaction when treated with a strong nucleophile. The correct answer is b. primary: will.

Learn more about substitution nucleophilic bimolecular reaction: https://brainly.com/question/30631335

#SPJ11

No, an electroscope cannot measure quantitative charges because it only indicates the presence or absence of charge.

An electroscope is a straightforward tool used to find electrical charges. Based on the idea that like charges repel one another, it causes an object, such as a leaf or a needle, to move away from another that is charged. An electroscope, however, cannot reveal the magnitude or size of the charge that is present.

A more advanced instrument, like an electrometer, which is capable of measuring small electric charges with a high degree of accuracy, would be required to measure quantitative charges. The output of detectors like Geiger counters and particle detectors, as well as static charges, are frequently measured using electrometers in scientific research and engineering applications.

Learn more about electroscope

brainly.com/question/10470196

#SPJ4

The complete question is-

Can an electroscope measure quantitative charges?

The pOH of an aqueous solution at 25. 0 °C in which [OH-] is 0. 0030 M is pOH = 2.52.

The hydroxide ion (OH-) concentration of a solution is quantified by pOH. As a result, it may sometimes be used to determine a substance's alkalinity or even electrical conductivity. More exactly, pOH is the negative logarithm of the equation for the hydroxide ion content:

pOH = 14 - pH

pOH can be used as a corrosion indicator for the conductivity of an electrolyte in a galvanic cell. The quantity of ions that serve as charge carriers affects a solution's conductivity. Consequently, the more OH- ions there are, the more alkaline the solution is, the more conductivity the electrolyte has, and the more galvanic corrosion occurs.

We have,

[OH-] as 0.0030 M

pOH = -log₁₀[OH⁻]

= - log₁₀ [0.003]

= -(-2.52)

pOH = 2.52

Therefore, the value of pOH =2.52

Learn more about pOH value:

https://brainly.com/question/26936571

#SPJ4

The ionic salt that contains a CO₄ ion would produce a neutral solution. Hence, option C is correct.

Salts are ionic compounds that completely disintegrate into ions when they are dissolved in water. They are created when acids and bases react, and they are always made up of either metal cations or cations made from ammonium (NH₄⁺).

The pH of a salt depends on the basicity or acidity of its anion and cation. The salt of a strong acid and a strong base creates a neutral solution because it does not create any H+ or OH-. Likewise, if the salt comes from a weak acid and a strong base, the resulting solution will be basic because the conjugate base of a weak acid is a strong base.

Therefore, the given ionic salt with a CO₄ ion is neutral.

Learn more about iconic net here: https://brainly.com/question/30376517

#SPJ4

When two clear, colorless liquids are mixed, a bright yellow solid might form due to the formation of a precipitate.

A precipitate is a solid that forms when two aqueous solutions (in this case, the two clear, colorless liquids) are mixed and the ions in the solution combine to form an insoluble solid.

For example, if one of the liquids contains sodium chloride (NaCl) and the other contains barium chloride (BaCl2), the sodium and barium ions will combine to form a bright yellow solid precipitate of barium chloride (BaCl2).

To know more about precipitate, refer here:

https://brainly.com/question/31046678

#SPJ11

The spectator ions in the reaction between silver nitrate and hydroiodic acid are nitrate ions (NO₃₋) and hydrogen ions (H⁺).

In order to identify the spectator ions in this reaction, we need to first write out the balanced chemical equation for the reaction:

AgNO₃(aq) + HI(aq) → AgI(s) + HNO₃(aq)

In this equation, the silver nitrate (AgNO₃) reacts with hydroiodic acid (HI) to produce a precipitate of silver iodide (AgI) and nitric acid (HNO₃).

The spectator ions are those ions that do not participate in the reaction, but remain in the solution unchanged. In this case, the nitrate ions (NO₃₋) from silver nitrate and the hydrogen ions (H⁺) from hydroiodic acid are the spectator ions, as they are present on both the reactant and product side of the equation.

In other words, the nitrate ions and hydrogen ions are not involved in the formation of the precipitate of silver iodide, and do not undergo any chemical change themselves.

Learn more about chemical reaction: https://brainly.com/question/11231920

#SPJ11

The order of oxyacids in decreasing acid strength is:

This order of  oxyacids is based on the number of oxygen atoms bonded to the central atom (in this case, Cl or Br) and the strength of the bond between the central atom and the oxygen atoms. The more oxygen atoms that are bonded to the central atom, the stronger the acid. Additionally, the strength of the bond between the central atom and the oxygen atoms increases as the electronegativity difference between the two atoms increases, making the acid stronger. HClO3 has the most oxygen atoms and the strongest bond, making it the strongest acid, while HBrO has the fewest oxygen atoms and the weakest bond, making it the weakest acid.

Find more exercises on  oxyacids;

https://brainly.com/question/14179541

#SPJ1

The main site for water reabsorption along the nephron is the renal tubules

Particularly the proximal tubule and the descending limb of the loop of Henle. As filtrate flows through the renal tubules, water and solutes are selectively reabsorbed into the bloodstream, with the majority of water reabsorption occurring in the proximal tubule. In this region, water is reabsorbed via osmosis, facilitated by the presence of aquaporin channels in the apical and basolateral membranes of the tubule cells. The descending limb of the loop of Henle is also important for water reabsorption, as it is permeable to water but not solutes, allowing for the creation of a concentration gradient that facilitates water reabsorption in the later parts of the nephron.

To know more about nephron, here

brainly.com/question/30975111

#SPJ4

The tests to distinguish aldehydes and ketones involve the addition of an oxidant. This is because aldehydes can be easily oxidized because there is a hydrogen next to the carbonyl, and oxidation does not require a catalyst.

In general, aldehydes and ketones can be differentiated by the use of a wide range of chemical reagents. Tests for detecting these functional groups are usually based on their distinctive properties, such as the capacity to react with oxidizing agents or nucleophiles, which give different functional group products when they interact with aldehydes or ketones. Since these functional groups have differing properties, it is critical to employ distinct methods for their identification.

However, the use of oxidizing reagents to differentiate between aldehydes and ketones is one of the most frequent approaches. This is due to the presence of a hydrogen atom attached to the carbonyl group in aldehydes, which is readily oxidized by reagents such as Tollens' reagent (Ag2O/NH3) or Benedict's reagent (CuSO4 + NaOH). Hence, many tests to distinguish aldehydes and ketones involve the addition of an oxidant, this is because aldehydes can be easily oxidized because there is a hydrogen next to the carbonyl, and oxidation does not require a catalyst. Therefore, the third option is the only correct one.

Learn more about ketones at:

https://brainly.com/question/30665943

#SPJ11