When the elevator has an upward acceleration of magnitude 2. 90 m/s2 , what does the scale read?.

The substance which will undergo a change of state from liquid to solid if the temperature was decreased from 30°C to -5°C is bromine and is denoted as option A.

This is referred to as physical change in a matter and it is a reversible change and do not involve any changes in the chemical makeup of the matter.

Bromine exists as a readily-volatilized liquid at room temperature. By using a coolant at a temperature below the freezing point of bromine (m.p. = -7.2 degrees Celsius) it is possible to obtain solid bromine crystals on the surface of the cold test tube.

Read more about Bromine here https://brainly.com/question/23894494

#SPJ1

Freezing is endothermic process. It involves absorption of heat from the surrounding environment.

A substance will have a freezing point and if we cooled it down below that, the particles in the substance start to lose energy and it will slow down.

So when the temperature is decreased, the kinetic energy will also decrease for the particles. They will start to move closer together.

So imagine if the particles are moving together, then the attraction or attractive force between the particles can become stronger. So this makes them arrange themselves in more orderly fashion or structure.

This requires energy because they are overcoming the intermolecular forces between the particles.

They will absorb energy from surrounding. So we can say freezing is an endothermic process.

Learn more about Freezing:

https://brainly.com/question/12919973

#SPJ4

The Bohr model for argon is a representation of the arrangement of the electrons in the atom of the element argon.

In the Bohr model, the electrons are arranged in concentric circles around the nucleus of the atom. Each circle represents a different energy level, and the electrons are located in these energy levels according to their energy.

For argon, the Bohr model shows that there are 18 electrons in the atom. These electrons are arranged in the following way:

- 2 electrons in the first energy level
- 8 electrons in the second energy level
- 8 electrons in the third energy level.

To know more about Bohr model here:

https://brainly.com/question/3964366#

#SPJ11

Answer:

Gamma-rays is the answer i think.

Explanation:

I just learned it in chemistry class in August.

We must apply the following equation:

[tex]n=\dfrac{m}{M}[/tex]

We're given:

Apply the equation:

[tex]n=\dfrac{m}{M}[/tex]

[tex]n=\dfrac{15.89}{16.04}[/tex]

[tex]n = 0.9906\hspace{4}mol[/tex]

0.9906 mol

The chemical P2 refers to the diphosphorus molecule, which is a compound made up of two phosphorus atoms bonded together.

Diphosphorus, also known as P2, is a chemical compound composed of two phosphorus atoms covalently bonded together. It is a highly reactive and unstable molecule that is rarely encountered in its pure form. Diphosphorus is an allotrope of phosphorus, meaning it is a different structural form of the same element.

At room temperature, diphosphorus exists as a colorless, odorless gas with a molecular weight of 60.98 g/mol. It is highly reactive and can easily ignite when exposed to air, making it a fire and explosion hazard. Diphosphorus is also highly toxic and can cause severe burns and respiratory problems if inhaled.

Diphosphorus has a unique electronic structure with a triple bond between the two phosphorus atoms. This triple bond makes the molecule highly reactive and unstable, as it seeks to break apart and form more stable bonds with other atoms. As a result, diphosphorus is a useful starting material for the synthesis of other phosphorus-containing compounds.

To know more about Diphosphorus here:

https://brainly.com/question/28024394#

#SPJ11

Specific heat capacity is the quantity of heat needed to change 1.00 g of a substance by 1.00 K.

Option A is correct

Specific heat capacity is like an objects 'thermal inertia' it is an object's resistance to an change in temperature.

Water has a very high specific heat and it takes a long time for it to lose heat and it also takes a long period of time to gain heat.

The formula for specific heat capacity, C , of a substance with mass m , is shown as C = Q /(m ⨉ ΔT) .

Where Q is the energy added and ΔT is the change in temperature.

Learn more about specific heat capacity, at: https://brainly.com/question/21406849

#SPJ1

Strong electrolytes are substances that completely dissociate into ions when dissolved in water, resulting in a high concentration of ions in solution. Here are some examples of strong electrolytes:

It's significant to remember that not all substances that dissolve in water function as powerful electrolytes. Weak electrolytes are substances that only partially breakdown into ions. Also known as non-electrolytes, some substances like nonpolar molecules do not dissociate at all.

To know more about strong electrolyte , check out :

https://brainly.com/question/2285692

#SPJ1

A ddNTP differs from a dNTP in that it has a non-nucleotide group attached to the sugar moiety.

dNTPs and ddNTPs are both types of nucleotides used in DNA synthesis. A dNTP (deoxynucleoside triphosphate) is a building block of DNA that contains a deoxyribose sugar, a nitrogen-containing base (adenine, guanine, cytosine, or thymine), and three phosphate groups.

On the other hand, a ddNTP (dideoxynucleoside triphosphate) has a non-nucleotide group attached to the sugar moiety, which terminates DNA chain extension. As a result, ddNTPs differ from dNTPs in terms of the functional group attached to the sugar moiety.

Learn more about functional groups:

https://brainly.com/question/493841

#SPJ4

The strongest intermolecular force in phosphoric acid is ion-dipole.

What is an ion dipole bond?

An ion-dipole bond is a type of chemical bond that occurs between an ion and a molecule with a dipole moment. Ions are charged atoms or molecules that have lost or gained one or more electrons, resulting in a net positive or negative charge. Dipole moments occur when the electrons in a molecule are not evenly distributed, resulting in one end of the molecule having a partial negative charge and the other end having a partial positive charge.

In an ion-dipole bond, the ion is attracted to the opposite partial charge on the dipole molecule. This attraction is known as an electrostatic interaction or Coulombic interaction, and it is a type of intermolecular force.

To learn more about the ion dipole bond, click the given link ;

https://brainly.com/question/29282058

#SPJ4

The gauge pressure of the air in the tank is 101325 Pa - 9.439*L  when The air pressure in a tank is measured using an inclined manometer whose arm is inclined 45 degree.

Let's call the length of the inclined arm of the manometer L. Then, the vertical component of the arm length is given by

[tex]L sin(45) = L/\sqrt2[/tex]

Next, we can use the hydrostatic pressure equation to relate the pressure difference between the two arms of the manometer to the difference in height:

ΔP = ρgh

Where ΔP is the pressure difference, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the difference in height between the two arms of the manometer.

Since the two arms of the manometer are open to the atmosphere, the pressure at the top of the manometer is equal to the atmospheric pressure, which we can assume to be 101325 Pa. Therefore, the gauge pressure of the air in the tank is equal to:

[tex]P_{gauge} = P_{atm} - \triangle P[/tex]

where [tex]P_{atm[/tex] is the atmospheric pressure.

Putting it all together, we get:

ΔP = (ρwater - ρair)gh

[tex]= (1000 kg/m^3 - 1.225 kg/m^3) * 9.81 m/s^2 * (L/\sqrt2)[/tex]

= 9.439 * L

Therefore, the gauge pressure of the air in the tank is:

Pgauge = Patm - ΔP

= 101325 Pa - 9.439 * L

Note that the pressure will be in Pa, and you can convert it to other units like psi or bar as necessary.

Learn more about manometer :

https://brainly.com/question/18354578

#SPJ4

Answer:

It is important to drop a ball from the same height multiple times to test and validate a theory or hypothesis. By doing this, one can observe and measure the consistency of the results and determine the average or most common outcome. The numbers may be slightly different due to small variations in the experiment such as air resistance, the angle at which the ball was dropped, or variations in the measurement tools used to record the data. By doing multiple trials and calculating an average, the effects of these variations can be minimized and a more accurate result can be obtained.

Explanation:

Dropping a ball from the same height three times is important in an experiment to calculate the average or mean value of the times it takes the ball to fall from the height to the ground. By repeating the experiment multiple times, we can minimize the effect of random errors and get a more accurate result.

However, even when dropping the ball from the same height three times, the recorded times may be slightly different due to several reasons. Some of these reasons could be variations in the initial release height of the ball, differences in the air resistance experienced by the ball during its fall, and slight variations in the reaction time of the person measuring the time. These variations can result in slightly different measured times, which can be accounted for by calculating the average value.

We must understand the relationship between moles, molar mass and mass to be able to solve questions with them:

[tex]n=\dfrac{m}{M}[/tex]

We're given:

Apply the formula:

[tex]n=\dfrac{m}{M}[/tex]

[tex]n=\dfrac{35.2}{120.368}\\\\n=0.292\hspace{4}mol[/tex]

0.292 mol

Standard Temperature and Pressure, or STP

1 mole of any gas takes up 22.4L at STP. Answer is 89.6L

What is STP (Standard Temperature and Pressure)?

Numerous thermodynamic tabulations and computations using STP. The density, viscosity, boiling point, and other characteristics of matter will change when the temperature or pressure changes. Calculations are made simpler and comparisons are made feasible by using a single set of criteria (or "state") to tabulate these data.

It is closely connected to the idea of matter in its usual state, sometimes known as "standard circumstances." Standard state does not always refer to a particular temperature, however 25 °C (298 K) is the most typical value used.

On a safety data sheet, the initials "STP" are most frequently found following a physical characteristic of the substance, such as density, flammable limit, or vapor pressure. The SDS's Section 9 (Physical and Chemical Properties) contains information on these characteristics.

To know more about STP, check the link below:

https://brainly.com/question/27100414

#SPJ4

The molar mass of the ferrocene is the 186.0 g/mol.

The molecular formula for the ferrocene is the C₁₀H₁₀Fe.

The molar mass of the carbon is 12 g/mol

The molar mass of the hydrogen is 1 g/mol

The molar mass of the Fe is 55.8 g/mol

The molar mass of the ferrocene , C₁₀H₁₀Fe is as

The molar mass of the ferrocene = 10 (12) + 10 (1) + 55.8

The molar mass of the ferrocene = 186 g/mol.

Thus, molar mass of the  ferrocene that is the C₁₀H₁₀Fe is 186 g/mol.

The ferrocene, C₁₀H₁₀Fe is also called as the  Dicyclopentadienyliron, this is the earliest and best known for the sandwich compounds.

To learn more about molar mass here

https://brainly.com/question/22997914

#SPJ4

Heat will flow from the titanium to the lead and from the iron to the titanium until the temperatures are equal.

Heat always flows from a region of higher temperature to a region of lower temperature until both regions reach thermal equilibrium. In this case, since the lead block is initially warmer than the titanium block and the iron block is initially even warmer than the lead block, heat will flow from the iron block to the lead block and from the lead block to the titanium block until all three blocks reach the same temperature.

However, it's important to note that heat will not flow directly from the iron block to the titanium block, because there is an intermediate block (the lead block) between them. Heat can only flow directly between the adjacent blocks in contact with each other, and the heat transfer process continues until all the blocks reach thermal equilibrium.

To know more about Heat, visit:

https://brainly.com/question/4978085

#SPJ1

The expression that can be used to find the value of B in square inches for this cylinder is A) π(8.3)2.

The combined area of a cylinder's curving surface and its two circular bases is known as the cylinder's area. The surface area of a cylinder is determined using the following formula:

A = 2πrh + 2πr²

We need to find the expression to calculate the area of the base of the given cylinder, which has dimensions r = 8.3 meters and h = 11.1 meters.

The formula for the area of the base of a cylinder is B = πr², where r is the radius of the base of the cylinder.

So, substituting the given value of r, we get:

B = π(8.3) ²

Simplifying this expression, we get:

B = π(68.89)

B = 68.89π.

To know more about surface area, visit:

https://brainly.com/question/29298005

#SPJ1

2.5mol of  aluminium ions are in 1.25mol of AI[tex]_2[/tex]O[tex]_3[/tex]. There are precisely  6.022×10²³  elementary entities in a mole.

The International System of Units uses the mole (symbol mol) as the unit of substance quantity (SI). How so many elementary units of a certain substance are present in an item or sample is determined by the quantity of that material.

There are precisely  6.022×10²³  elementary entities in a mole. An elementary thing may consist of an atom, an molecule, and ion, and ion pair, or maybe a subatomic particle like an electron dependent on what the material is. AI[tex]_2[/tex]O[tex]_3[/tex] contains 2 mole of aluminium ion

mole of AI[tex]_2[/tex]O[tex]_3[/tex] =1.25mol

mole of aluminium ion =2×1.25mol =2.5mol

Therefore, 2.5mol of  aluminium ions are in 1.25mol of AI[tex]_2[/tex]O[tex]_3[/tex].

To learn more about mole, here:

https://brainly.com/question/15209553

#SPJ9

The concept of covalent bond is introduced by the scientist G.N. Lewis. The Lewis structure of hydrogen sulfide is similar to that of water.

The structure in which the electrons of the compound are represented by dots is defined as the Lewis structure. It provide a picture of bonding in molecules in terms of the shared pairs of electrons and the octet rule.

The structure of H₂S contains two 'H' atoms and one 'S' atom. The central element is sulfur and two hydrogen atoms are linked with the help of a single bond. It has tetrahedral shape.

Thus the Lewis structure of H₂S is shown below.

To know more about Lewis structure, visit;

https://brainly.com/question/20300458

#SPJ1

In a chemical reaction represented by the general equation A + B → C + D, there are four distinct mole ratios that can be written.

The MOLE RATIO is a comparison of how many moles of one substance are required to participate in a chemical reaction with another substance, based on the balanced chemical equation.

What is mole ratio?

To know more about mole ratio, click the link given below:

https://brainly.com/question/15288923

#SPJ1

The compound CO has name carbon monoxide while CH₂ and NO₂ respectively ethylene and nitrogen dioxide respectively.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ1

The molecular geometry of SO3 is trigonal planar.


Molecular geometry is the three-dimensional arrangement of atoms in a molecule.

It is determined by the number of bonding and non-bonding electron pairs in the valence shell of the central atom. In the case of SO3, the central atom is sulfur (S), which is surrounded by three oxygen (O) atoms.

Each oxygen atom forms a double bond with the sulfur atom, giving a total of six bonding electron pairs. Since there are no non-bonding electron pairs, the molecular geometry is determined by the arrangement of the three oxygen atoms around the central sulfur atom.

The most stable arrangement is one in which the oxygen atoms are placed at the corners of an equilateral triangle, with the sulfur atom at the center. This gives the molecule a trigonal planar geometry.

To know more about Molecular geometry here:

https://brainly.com/question/7558603#

#SPJ11

The data collected along the frontal boundary would best alert scientists that the two colliding air masses may cause a tornado is large differences in temperature, humidity, and air pressure on either side of where the fronts meet. Therefore, option C is correct.

When two different air masses collide, they do not mix. They rub up against each other along a line known as a front. Because warm air is lighter, it rises when it collides with cold air. It cools at high altitude, and the water vapor it contains condenses.

A weather front is a transition zone at the Earth's surface between two different air masses. Each air mass has its own temperature and humidity profile.

Turbulence is common at a front, which is the boundary between two different air masses. Clouds and storms can form as a result of turbulence.

Thus, option C is correct.

To learn more about the fronts meet, follow the link;

https://brainly.com/question/2215934

#SPJ1

Hammond's postulate predicts that the charge in the transition state of a reaction will be distributed in a way that minimizes the difference in electronegativity between the two atoms.

Hammond's postulate, also known as Hammond's theorem, states that in the transition state of a reaction, the charge is distributed in such a way as to minimize the difference in electronegativity between the two atoms involved in the reaction. This means that if one of the atoms is more electronegative than the other, it will pull electrons towards itself more strongly and therefore, carry a larger portion of the negative charge in the transition state. The charge distribution in the transition state will therefore be a balance between the electronegativities of the two atoms involved in the reaction.

In the case of the Cl and Br atoms, if the electronegativity difference is significant, the Br atom is likely to carry more of the negative charge. However, it is important to note that this is just a prediction and the actual charge distribution in the transition state may be influenced by other factors, such as bond length, bond angle, and electronic factors.

Learn more about Transition State here:

https://brainly.com/question/476481

#SPJ4

Answer:

Explanation:

The beta decay of uranium-232 can be represented by the following equation:

232U ------------> 232Th + 0e + v

where 0e represents a beta particle (an electron) and v represents an antineutrino.

The volume of the water is 7100 cm³

A decomposition reaction is a type of chemical reaction in which a single compound breaks down into two or more simpler substances. In a decomposition reaction, a reactant is broken down into two or more products, typically through the application of heat, light, or an electrical current.

Mass of the ZnSO4.7H2O = 54.46g - 41.64g

= 12.86 g

Number of moles of the  ZnSO4.7H2O =  12.86 g/287.6 g/mol

= 0.045 moles

If 1 mole of ZnSO4.7H2O produces 7 moles of water

0.045 moles produces  0.045 * 7/1

= 0.315 moles

If 1 mole of gas occupies 22.4 L

0.315 moles of gas occupies 0.315 * 22.4/1

= 7.1 L or 7100 cm³

Learn more about decomposition:https://brainly.com/question/8009068

#SPJ1

Here, the control group is D. The compost does not affect the photosynthesis of the plant but it will affect its growth. Hence, the possible hypothesis is, since decomposition is necessary for the release of nutrients, the older the compost is, the taller the soybean plants will grow.

Photosynthesis is the biochemical process in plants to produce the chemical energy. The reaction involves combination of water and carbon dioxide to form glucose and oxygen gas. It does not depends on the nutrients or compost from the soil.

Old  compost is made by mixing organic wastes in the right proportions into piles, rows, or containers; adding bulking agents, as needed, to create air spaces; regulating temperature, moisture, and oxygen to achieve accelerated decomposition; and allowing the finished product to fully stabilize and mature through a curing process.

Therefore,  the possible hypothesis for this experiment is option 3. since decomposition is necessary for the release of nutrients, the older the compost is, the taller the soybean plants will grow.

Find more on composts:

https://brainly.com/question/12624929

#SPJ1

An atom's nucleus is surrounded by electrons and protons and neutrons, each with a unique energy level. The Pauli exclusion principle shows how to fill orbitals with electrons in the proper order.

Pauli's exclusion principle is a fundamental principle of quantum mechanics that states that no two fermions can occupy the same quantum state simultaneously. Fermions are a class of subatomic particles that include electrons, protons, and neutrons, and are distinguished by their half-integer spin.

The exclusion principle is named after the Austrian physicist Wolfgang Pauli, who formulated it in 1925. The principle is based on the wave nature of matter and the fact that fermions are described by wave functions that obey the Schrödinger equation.

Energy order of orbital

1s<2s<2p<3s<3p<4s<3d<4p<5s<4d<5p<6s<4f<5d

An atom's nucleus is its main structural component. It is surrounded by electrons and has protons and neutrons inside. These electrons all share the same mass and charge, though. An atom's electrons each have a unique energy level. The positively charged nucleus's strongest attractive force is felt by the electrons nearest to it, which have the lowest energy. Higher energy electrons are located farther away.

The Pauli exclusion principle demonstrates how to fill orbitals with electrons in the proper order.

To learn more about Pauli's Law of exclusion, click the given link ;

brainly.com/question/11898781

#SPJ4

The molar mass of NaCl and the molar mass of CaCO₃ contain approximately the same number of grams per mol.

In science, the molar mass (M) of a chemical compound is characterized as the proportion between the mass and how much substance (estimated in moles) of any example of said compound.[1] The molar mass is a mass, not sub-atomic, property of a substance. The molar mass is a normal of many occasions of the compound, which frequently fluctuate in mass because of the presence of isotopes.

Most ordinarily, the molar mass is figured from the standard atomic weight and is consequently an earthly normal and an element of the overall wealth of the isotopes of the constituent particles on the planet. The molar mass is fitting for changing over between the mass of a substance and how much a substance for mass amounts.

i()Molar of mass : NaCl: 58.5 g/mol No. of Moles = Mass / Molar mass Mass = 1 × 58.5g Therefore, mass of 1 mole of NaCl is 58.5 g.

(ii) Molecular mass of CaCO₃ = (1 × Ca + 1 × C + 3 × O) = (1 × 40 + 1 ×12 + 3 × 16) = 40 + 12 + 48 = 100 Molar mass of CaCO₃ = 100 g

To know more about molar mass,visit here:

https://brainly.com/question/22997914

#SPJ4